1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
|
.. This work is licensed under a Creative Commons Attribution 4.0 International License.
.. http://creativecommons.org/licenses/by/4.0
.. (c) OPNFV, Intel Corporation and others.
.. OPNFV SAMPLEVNF Documentation design file.
============
Requirements
============
**Required Test setup:**
.. _SampleVNF: https://wiki.opnfv.org/samplevnf
.. _Technical_Briefs: https://wiki.opnfv.org/display/SAM/Technical+Briefs+of+VNFs
Supported Test setup
--------------------
The device under test (DUT) consists of a system following
* A single or dual processor and PCH chip, except for System on Chip (SoC) cases
* DRAM memory size and frequency (normally single DIMM per channel)
* Specific Intel Network Interface Cards (NICs)
* BIOS settings noting those that updated from the basic settings
* DPDK build configuration settings, and commands used for tests
Connected to the DUT is an IXIA* or Software Traffic generator like pktgen or TRex,
simulation platform to generate packet traffic to the DUT ports and
determine the throughput/latency at the tester side.
Hardware & Software Ingredients
-------------------------------
::
+---------------+------------------+
| Item | Description |
+---------------+------------------+
| Memory | Min 20GB |
+---------------+------------------+
| NICs | 2 x 10G |
+---------------+------------------+
| HostOS/Guest | Ubuntu 16.04 LTS |
+---------------+------------------+
| kernel | >4.4.0-34-generic|
+---------------+------------------+
|DPDK | >17.02 |
+---------------+------------------+
Boot and BIOS settings
+------------------+---------------------------------------------------+
| Boot settings | default_hugepagesz=1G hugepagesz=1G hugepages=16 |
| | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33 |
| | nohz_full=1-11,22-33 rcu_nocbs=1-11,22-33 |
| | Note: nohz_full and rcu_nocbs is to disable Linux*|
| | kernel interrupts, and it’s import |
+------------------+---------------------------------------------------+
|BIOS | CPU Power and Performance Policy <Performance> |
| | CPU C-state Disabled |
| | CPU P-state Disabled |
| | Enhanced Intel® Speedstep® Tech Disabled |
| | Hyper-Threading Technology (If supported) Enable |
| | Virtualization Techology Enable |
| | Coherency Enable |
| | Turbo Boost Disabled |
+------------------+---------------------------------------------------+
Network Topology for testing VNFs
---------------------------------
The ethernet cables should be connected between traffic generator and the VNF server (BM,
SRIOV or OVS) setup based on the test profile.
The connectivity could be
- Single port pair : One pair ports used for traffic
::
e.g. Single port pair link0 and link1 of VNF are used
TG:port 0 <------> VNF:Port 0
TG:port 1 <------> VNF:Port 1
- Multi port pair : More than one pair of traffic
::
e.g. Two port pair link 0, link1, link2 and link3 of VNF are used
TG:port 0 <------> VNF:Port 0
TG:port 1 <------> VNF:Port 1
TG:port 2 <------> VNF:Port 2
TG:port 3 <------> VNF:Port 3
For openstack/Standalone virtualization, installation please refer the openstack guide and ovs-dpdk/sriov github.
(TBA - Add link to guide)
|
