summaryrefslogtreecommitdiffstats
path: root/VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py
AgeCommit message (Collapse)AuthorFilesLines
2023-01-17Fix issue with system_ready_for_rapid fileLuc Provoost1-2/+4
In the /opt/rapid directory, we used to check for the existance of the file system_ready_for_rapid. This file was created when all the initialization is done properly. This check was however broken and always resulted succesfully, even if the file did not exist. When executing runrapid.py, the system will now wait to connect to PROX, till this file exists. The file is created when running start.sh Signed-off-by: Luc Provoost <luc.provoost@gmail.com> Change-Id: Idca52549aae40070a0b6ea1d7ccbf6c322dc631d
2023-01-09Add entry in the log file when copying filesLuc Provoost1-0/+3
Added some extra logging in the rapid log file when we copy files to or from the PROX instances. Signed-off-by: Luc Provoost <luc.provoost@gmail.com> Change-Id: If9947ce87cec34f8336c69a243e9d5340ca37aef
2021-11-02Create combined image and add helm chartYury Kylulin1-0/+1
Changes in this commit: 1) Create self contained image, rapid scripts can be executed from the management pod and create other testing pods in the cluster. 2) Helm chart to automate rapid deployment and proper service account configuration to be able to start management pod. 3) Fix for migration to paramiko. Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Change-Id: I0281871cce392b3003e0274602a5c90c29af9b23
2021-08-20Fix ssh timeout issueLuc Provoost1-1/+1
Moving to paramiko for ssh introduced a bug: when starting PROX through ssh, a default timeout of 15 seconds was started. The timer is now disable since we need to run PROX as long as the test will take. Change-Id: I65162fff33beb6d30d2f5ee2b83f9bef7880ce4b Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-07-16Using paramiko for all ssh & scpLuc Provoost1-78/+11
By using paramiko, we can now also use differnt credentials to login into the PROX instances. In the ssh section of the environment file, you can now also add the password parameter. Change-Id: I08d31cbf0d02d7e82b7fbe34268851f73ff5dde0 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-05-12Fix latency buckets with multiple lat coresLuc Provoost1-19/+28
The bucket data of the last latency core was taken into account when collecting the latency stats. We are now adding the bucket data for all cores. Also changed the error reporting when PROX instance is breaking the pipe connection (e.g. when the dataplane network is overloaded). Cleaning up some trailing spaces in pox_ctrl.py Change-Id: I09ba01ac65e7e4e9ff03ad47da83aa4f83250a67 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-15Rework of statistics reportingLuc Provoost1-4/+7
- Cleanup of the format.yaml file. - Adding of the packet mis-ordering statistics - Added a warmup phase to get the correct mis-ordering statistics since ARP messages need to be dealt with before we can collect correct misordering stats - Code cleanup avoiding some long lines - Removing background traffic control from rapid_flowsizetest.py since this is already done in the iteration code in rapid_test.py Change-Id: I4c60a90353f27b8e2d0b62505e8f1cd886a17f0a Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-12Code improvementsLuc Provoost1-13/+15
Rework of some of the code for better readability Change-Id: I559e88faba31d93e593d39cf436f3e114ba4528a Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-07Log ssh & scp related issues also on screenLuc Provoost1-10/+3
When scripts are doing an ssh or scp to the PROX instances, errors were sometimes hidden. E.g. when we try to upload a config file to the PROX instance that is already existing but owned by another user, we would not see the error on the screen. Note this will only happen if you build your own image. In case you use the pre-canned PROX images, this should not cause issues. Change-Id: I94176b737cd548c93afc71450a85910d7eca2b0c Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-03-15Fix the tuned optimizationsLuc Provoost1-0/+2
tuned-adm is now run through check_prox_system_setup.sh at the first system startup/reboot. This will result in the correct grub cmdline parameters. We are also coying the default rapid_rsa_key in the authorized_keys of the rapid user, which is now the default user to run the tests. Fixed also an issue in handle_mirror.c: using now ETYPE_IPv4. Changed deploycentostools.sh to reflect the changes done when building the image with disk-image-create. Change-Id: I5933d21faef9fe02b56c01d0b96e2c143cc5476d Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-02-25Preparation for packet mis-ordering statsLuc Provoost1-0/+3
Changed PROX and the python scripts so that the "lat all stats" command also returns the mis_ordered, extent and duplicate statistics. In order to make this work properly, we need now to also stop and restart the latency cores, every time we stop and start the generator cores, since the sequence numbers are reinitialised every time we start the generator core. Change-Id: Ic4212a989c8ee9d0f026a34ca63a08b982c32b71 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-12-28Improved PROX cleanup when exitingLuc Provoost1-2/+4
Sending now a 'quit' command to PROX, so that the thread running PROX in an ssh session is now cleaned up correctly. Also fixed a problem with the logging when running the code more than once. We only create handlers now, when they do not yet exist. Updated the rapid version. Also added some more tests in the testcases.yaml for xtesting. At the end of a run, the PROX.log files are copied in the results directory. The success criterium for a test 'pass_threshold' has been removed from the test files and is to be controlled by the xtesting testcases.yaml file. Change-Id: Ifbbb1c91f32c9176f52025d9ae4c495b432a94c9 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-09-29New PROX version, background traffic reportingLuc Provoost1-7/+0
deploycentostools.sh is now installing a recent PROX version. When using background traffic, the tool is also reporting the total traffic that was handled by the NFVi stack, including foreground & background traffic. The use of the prox_socket and prox_launch_exit was also broken in a previous release and is now fixed. When setting prox_socket to false for a PROX instance, we will not create a socket connection to control that PROX instance. Setting this option to false is not meaningful for the generator PROX instances since we would not be able to control the behavior of the PROX generator during the test. You could use the generator against another non-PROX instance and then set prox_socket to false for that non-PROX instance. Default is true. prox_launch_exit is used to start and stop the PROX program inside the instance. Default is true. This is useful in case you want to start PROX manually to be able to inspect the PROX UI, but at the same time, let the rapid scripts control the testing. Change-Id: Ib5aa809f4be201859542769f5f55f4989dad97ef Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-09-17Using python concurrent futuresLuc Provoost1-53/+4
Different PROX instances are now started in parallel. The script is starting multiple threads. Change-Id: Ia8785a792240d4e9b5d5d98174bc4c5d7ae5657c Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-09-16ramp generator traffic & prox.log copyLuc Provoost1-0/+22
A new parameter can be put in the *.test files so that the requested traffic is not generated at once, but slowly increasing up to the requested traffic. This is important for some SW switched that adapt and learn from the applied traffic. When suddenly applying a high traffic, the switch might not have enough time to learn and lose packets. Only after a period of time (up to 10 seconds?), the switch can cope with the traffic without packet loss. In order to get reproducible results in this case with low packet loss, please put the parameter ramp_step in the test section of the *.test file. The step is expressed in percentage of a 10Gb/s traffic. If the parameter is not present, the load will be immediately applied. When the runrapid.py script is now finished, it also copies the prox.log files from all the prox instances. In case of issues, please investigate this log file. When using background traffic, the tool will also print the average background traffic for each step in the DEBUG log. In this way, you can check that the background traffic is actually dealing with the same amount of traffic as the foreground. The tool is printing the packet reception rate of the background generators. A bug was also fixed regarding the latency percentile reporting. When using tests involving l2gen.cfg, the values of the percentile latency were wrong. Change-Id: Id3dd02ed5cab084414c717cf898b30e6980ddf31 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-07-05Adding vdev support and vfioLuc Provoost1-2/+3
Using vfio in stead of igb_uio. DPDK 2020.5 is NOT compiling the igb_uio driver by default any more. For the l3 mode, we are now using the new PROX vdev feature. This is achieved by adding the vdev parameter in the port section of the PROX config files. One of the advantages is that we can now ping a port managed by PROX: the requests will be forwarded by PROX to the LINUX stack, who will reply to the ping. A tap device is being created by PROX to support this feature. Installing old version of nasm since latest causes some issues. If not pushgateway is being used, it should be commented out in the config_file. vfio is now loaded by specifying the module in /etc/modules-load.d There is also an after_boot.sh script that will be run by check_prox_system_setup.sh, which can be used for further configuration of the instance after boot. There is now also a file created /opt/rapid/system_ready_for_rapid by the check_prox_system_setup.sh script. This file is created once all configuration is done. The runrapid.py script will wait till this file is created before executing any tests. Change-Id: Ic5c41af82642066af42134c3323297f5a06f6f72 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-05-29Fix for container .env file and small updatesLuc Provoost1-25/+52
Since runrapid.py is now supporting more than 1 dataplane interface, we need to use a port index in the rapid.env file for the dataplane ports. In k8sdeployment.py, we only support 1 dataplane port, but we are writing dp_ip1 and dp_mac1 in the environment file. The copyright dates are also updated. Some references to VM have also been changed to instance. Change-Id: Ie1d036c13ef5d6f0aa1f35aa068a9760a1cfc2a9 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-05-15Support for imix packet sizesLuc Provoost1-0/+3
All packet size in the *.test files have been replaces with imix sizes. imix is now a list of packet sizes. If you want to run with only a pakcet size of 64, you need to specify a list containing only 1 size: [64]. You can also specify multiple imix values by specifying a list of list of sizes. The keyworkds in the test files are now imix & imixs. Change-Id: Iea47c0266b022133b7bbfc9a6811e3199ae41521 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-05-15createrapid.py is now using heat templates yamlLuc Provoost1-0/+1
yaml files have been added to the repo as an example. Please check the README explaining the output section reqs for this yaml file. There is also a new file (config_file): it also specifies which yaml files to use. multiple dataplane interfaces per VM can now be specified and will appear in the <STACK>.env file. An error in setting the packet size has been fixed (see set_udp_packet_size for packet size setting details) Change-Id: Ie89a4940521dac7dd3652acca477739abb9f5497 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-05-15Code rewrite and Python3 supportLuc Provoost1-95/+108
The code has been rewritten in multiple classes and files for better readability and maintainability. You should now also use Python3 to run the scripts. Some of the variables in the config files have moved to other sections. The pushgateway parameter moved to the [varia] section of the rapid environment file. Change-Id: Ic61a1bc3baa39447d42b21dfcc0f16c28fcdfa6e Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-01-13Initial support for percentile latency measurementsLuc Provoost1-1/+41
We are now reporting a percentile number for the round-trip latency. The numbers are only correct for processors running at 2GHz. Will fix this next so it runs for any freqency. We only report 1-127 usec. If the latency goes higher, we are now reporting "VERY HIGH". Change-Id: If9fda63cea8616febcc0f24dc52590976cf39f3d Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-12-30Support for ETSI GS NFV-TST 009Luc Provoost1-1/+7
New test added TST009_Throughput.test allowing to run the throughput benchmark as defined in ETSI GS NFV-TST 009. This change adds the binary search algorithm as defined in the specification document. Change-Id: I00e81a811a9c42b06136694fc1387bc59e954a28 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-11-26rapid november release combining changesLuc Provoost1-7/+21
-Renamed monitorswap.test into corestats.test. This is a more generic test case that can monitor the core statistics of all PROX instances -New portstats.test which can monitor the port statistics of all PROX instances -Removed the tasks parameter in the [DEFAULT] section of the *.test files. Runrapid.py is now scaning the PROX configuration files to automatically detect the PROX tasks that are being used. -There is now an option to add the PushGateway parameter in the [Default] section of some *.test files. This will push the measurements to the Gateway, so they can be used by tools like Grafana. The logging of the data in a csv file has also been improved. Results can now be found on the screen, in the RUN*.log files, in the *.csv files and are being pushed to the PushGateway. -In the *.test files, replaced the swapcores, irqcores and impaircores by the cores parameter since they are not treated differently by the code. For a generator, we are still using the gencores and latcores parameters since we need to treat them differently in runrapid.py -devbind.sh is removed from the repository since this file is now created by runrapid.py -renamed the rapidVMs.vms file into rapid.vms -image is now built without ssh access for root. Only using centos user. runrapid.py is now using centos user for ssh sessions. PROX tools are strted using sudo -using new DPDK, mb_lib and PROX versions as defined in deploycentostools.sh -installing missing yum-utils package in image -added flowsize parameter to the impairtest -added list of flowsizes to the fixed_rate testing (l3framerate.test) -the irqtest can now loop through multiple Test Machines in stead of only checking the irq of one. Note that we should have the same cores parameter for all Test machines -changes in prox_ctrl.py to support setting the speed of a generator on a combination of mulitple cores and tasks. Also added the multi_port_stats function to support the new portstats.test -Updated version to 19.11.21 -Fixed some power of 2 in the flow table Change-Id: Ia14543bf3195a2b1bd4184b455da6940f1777fc9 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-07-05Some fixes after code reviewLuc Provoost1-8/+9
Taking into account comments from Patrice and Xavier Change-Id: Ifdabd1945e074c9ee97b059956f107901392c020 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-06-30Multiple changes for June releaseLuc Provoost1-18/+32
- Change inittest in warmuptest. This has now a warmuptime, warmupspeed, packet size and flow size. - Change in centos.json. This will now also copy deploycentostools.sh during image building so that it can be used to re-compile prox in the VM by typing "./deploycentostools.sh compile" - runrapid.py parameters needing a file name, need to be complete file names: no extensions will be added any more by the scripts. - Changes in createrapid.py to handel the openstack CLI output in a simpler way. - The management interface of the VMs can now also be an SRIOV interface. We have now an extra optional parameter in the VM sections of the rapiVMs.vms file: SRIOV_mgmt_port - Changed the name of some sections and keys in the environment file since runrapid.py will not always communicate to OpenStack VMs. This could be containers or any other (virtual) machine. - The previous MachineMap.cfg has been renamed to machine.map - A new test has been added: monitorswap is just showing the statistics of a swap (virtual) machine, without generating any packets. This is useful in situations where an external tester is used. - Latency and core statistics can now be measured even if there are multiple PROX cores and tasks running. A new parameter has been added in the test files with following default value: tasks=[0]. During the collection of statistics, all tasks in this list will be queried. It is ok to have a non-existing task in such a query since it will be ignored. - A --screenlog parameter was added for runrapid.py allowing for more detailed output on the screen during debugging. No need to check the log file. - Previous tests to run multiple packet size with a given flow size and to run multiple flow size, with a given packet size are now combined by specifiying 2 lists: packetsizes & flows - The screen output of this test has also been reworked with more meaningful column names and the test result is now in the field "core received". This allows also for faster termination of the test: When the all packets sent by Gen NIC are received by the cores within the thresholds for packet loss and latency, the test is now stopped, even we were requesting more packets to be sent. Change-Id: I3307e7a972f2140e739f376f146fe875df0303e6 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-06-28Change of openstackrapid directory nameLuc Provoost1-0/+254
The scripts are orrignally written to support an OpenStack deployment. We are now making changes to support container environments, hence renaming the directory to rapid. Change-Id: Icaa2fad83c6da451eee733934151e98e9cd07de4 Signed-off-by: Luc Provoost <luc.provoost@intel.com>