diff options
Diffstat (limited to 'docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst')
| -rw-r--r-- | docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst | 26 |
1 files changed, 14 insertions, 12 deletions
diff --git a/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst index 7ba25fe1..28da0ebd 100644 --- a/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst +++ b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst @@ -17,6 +17,7 @@ The device under test (DUT) consists of a system following; * Specific Intel Network Interface Cards (NICs) * BIOS settings noting those that updated from the basic settings * DPDK build configuration settings, and commands used for tests + Connected to the DUT is an IXIA* or Software Traffic generator like pktgen or TRex, simulation platform to generate packet traffic to the DUT ports and determine the throughput/latency at the tester side. @@ -103,17 +104,16 @@ The connectivity could be (TG_2(UDP_Replay) reflects all the traffic on the given port) * Bare-Metal - Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run + Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run * Standalone Virtualization - PHY-VM-PHY + * SRIOV - Refer below link to setup sriov - https://software.intel.com/en-us/articles/using-sr-iov-to-share-an-ethernet-port-among-multiple-vms + https://software.intel.com/en-us/articles/using-sr-iov-to-share-an-ethernet-port-among-multiple-vms * OVS_DPDK - Refer below link to setup ovs-dpdk - http://docs.openvswitch.org/en/latest/intro/install/general/ - http://docs.openvswitch.org/en/latest/intro/install/dpdk/ + http://docs.openvswitch.org/en/latest/intro/install/general/ + http://docs.openvswitch.org/en/latest/intro/install/dpdk/ * Openstack Use any OPNFV installer to deploy the openstack. @@ -132,19 +132,21 @@ Step 0: Preparing hardware connection Step 1: Setting up Traffic generator (TRex) TRex Software preparations - ************************** * Install the OS (Bare metal Linux, not VM!) * Obtain the latest TRex package: wget https://trex-tgn.cisco.com/trex/release/latest * Untar the package: tar -xzf latest * Change dir to unzipped TRex * Create config file using command: sudo python dpdk_setup_ports.py -i + In case of Ubuntu 16 need python3 + See paragraph config creation for detailed step-by-step + (Refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html) Build SampleVNFs ------------------ +---------------- Step 2: Procedure to build SampleVNFs @@ -487,7 +489,7 @@ step 4: Run Test using traffic geneator UDP_Replay - How to run ----------------------------------------- +----------------------- Step 3: Bind the datapath ports to DPDK @@ -532,7 +534,7 @@ step 4: Run Test using traffic geneator For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html PROX - How to run ------------------- +----------------- Description ^^^^^^^^^^^ @@ -654,7 +656,7 @@ PROX COMMANDS AND SCREENS +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+ | version | Show version | | +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+ - | port_stats <port id> | Print rate for no_mbufs, ierrors, rx_bytes, tx_bytes, rx_pkts, | | + | port_stats <port id> | Print rate for no_mbufs, ierrors, rx_bytes, tx_bytes, rx_pkts, | | | | tx_pkts and totals for RX, TX, no_mbufs ierrors for port <port id> | | +----------------------------------------------+---------------------------------------------------------------------------+----------------------------+ @@ -941,7 +943,7 @@ PROX Compiation installation * cd samplevnf * export RTE_SDK=`pwd`/dpdk * export RTE_TARGET=x86_64-native-linuxapp-gcc -* git clone http://dpdk.org/git/dpdk +* git clone git://dpdk.org/dpdk * cd dpdk * git checkout v17.05 * make install T=$RTE_TARGET |