diff options
Diffstat (limited to 'docs/testing/developer/requirements/03-Requirements.rst')
| -rw-r--r-- | docs/testing/developer/requirements/03-Requirements.rst | 20 |
1 files changed, 12 insertions, 8 deletions
diff --git a/docs/testing/developer/requirements/03-Requirements.rst b/docs/testing/developer/requirements/03-Requirements.rst index dab07a6e..25798606 100644 --- a/docs/testing/developer/requirements/03-Requirements.rst +++ b/docs/testing/developer/requirements/03-Requirements.rst @@ -15,24 +15,25 @@ Requirements Supported Test setup: -------------------- -The device under test (DUT) consists of a system following; + +The device under test (DUT) consists of a system following + * A single or dual processor and PCH chip, except for System on Chip (SoC) cases * DRAM memory size and frequency (normally single DIMM per channel) * Specific Intel Network Interface Cards (NICs) * BIOS settings noting those that updated from the basic settings * DPDK build configuration settings, and commands used for tests + Connected to the DUT is an IXIA* or Software Traffic generator like pktgen or TRex, simulation platform to generate packet traffic to the DUT ports and determine the throughput/latency at the tester side. -Below are the supported/tested (:term:`VNF`) deployment type. -.. image:: images/deploy_type.png - :width: 800px - :alt: SampleVNF supported topology Hardware & Software Ingredients ------------------------------- -.. code-block:: console + +:: + +---------------+------------------+ | Item | Description | +---------------+------------------+ @@ -75,19 +76,22 @@ The connectivity could be - Single port pair : One pair ports used for traffic -:: + :: + e.g. Single port pair link0 and link1 of VNF are used TG:port 0 <------> VNF:Port 0 TG:port 1 <------> VNF:Port 1 + - Multi port pair : More than one pair of traffic -:: + :: e.g. Two port pair link 0, link1, link2 and link3 of VNF are used TG:port 0 <------> VNF:Port 0 TG:port 1 <------> VNF:Port 1 TG:port 2 <------> VNF:Port 2 TG:port 3 <------> VNF:Port 3 + For openstack/Standalone virtualization, installation please refer the openstack guide and ovs-dpdk/sriov github. (TBA - Add link to guide) |