xci: Add main playbooks and files

This patch adds the main/common playbooks, files, and templates to
be used for all flavors.

The provisioning and OpenStack installation process will be as below
- provision VMs for flavor using bifrost
- once the VMs are provisioned, configure-localhost.yml playbook will
be run, preparing the localhost in order to ensure the right playbooks
(configure-opnfvhost.yml and configure-targethosts.yml), inventory files
and var files are in place before we proceed with configuring opnfv host.
- after getting the right files for the flavor, opnfv host will be
configured using configure-opnfvhost.yml playbook.
- finally, the target hosts will be configured.
- once the above process is completed, openstack-ansible playbooks will
be run, setting up hosts, infrastructure and OpenStack.

Change-Id: I6e08b2cfdab9627f765e6fc414917b09f953cab2
Signed-off-by: Fatih Degirmenci <fatih.degirmenci@ericsson.com>

3 files changed, 228 insertions, 0 deletions

diff --git a/xci/template/compute.interface.j2 b/xci/template/compute.interface.j2
index e69de29b..1719f6a0 100644
--- a/xci/template/compute.interface.j2
+++ b/xci/template/compute.interface.j2
@@ -0,0 +1,86 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+
+# Physical interface
+auto ens3
+iface ens3 inet manual
+
+# Container/Host management VLAN interface
+auto ens3.10
+iface ens3.10 inet manual
+    vlan-raw-device ens3
+
+# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
+auto ens3.30
+iface ens3.30 inet manual
+    vlan-raw-device ens3
+
+# Storage network VLAN interface (optional)
+auto ens3.20
+iface ens3.20 inet manual
+    vlan-raw-device ens3
+
+# Container/Host management bridge
+auto br-mgmt
+iface br-mgmt inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3.10
+    address {{host_info[inventory_hostname].MGMT_IP}}
+    netmask 255.255.252.0
+
+# compute1 VXLAN (tunnel/overlay) bridge config
+auto br-vxlan
+iface br-vxlan inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3.30
+    address {{host_info[inventory_hostname].VXLAN_IP}}
+    netmask 255.255.252.0
+
+# OpenStack Networking VLAN bridge
+auto br-vlan
+iface br-vlan inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3
+    address {{host_info[inventory_hostname].VLAN_IP}}
+    netmask 255.255.255.0
+    gateway 192.168.122.1
+    offload-sg off
+    # Create veth pair, don't bomb if already exists
+    pre-up ip link add br-vlan-veth type veth peer name eth12 || true
+    # Set both ends UP
+    pre-up ip link set br-vlan-veth up
+    pre-up ip link set eth12 up
+    # Delete veth pair on DOWN
+    post-down ip link del br-vlan-veth || true
+    bridge_ports br-vlan-veth
+
+# Add an additional address to br-vlan
+iface br-vlan inet static
+    # Flat network default gateway
+    # -- This needs to exist somewhere for network reachability
+    # -- from the router namespace for floating IP paths.
+    # -- Putting this here is primarily for tempest to work.
+    address {{host_info[inventory_hostname].VLAN_IP_SECOND}}
+    netmask 255.255.252.0
+    dns-nameserver 8.8.8.8 8.8.4.4
+
+# compute1 Storage bridge
+auto br-storage
+iface br-storage inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3.20
+    address {{host_info[inventory_hostname].STORAGE_IP}}
+    netmask 255.255.252.0
diff --git a/xci/template/controller.interface.j2 b/xci/template/controller.interface.j2
index e69de29b..74aeea99 100644
--- a/xci/template/controller.interface.j2
+++ b/xci/template/controller.interface.j2
@@ -0,0 +1,71 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# Physical interface
+auto ens3
+iface ens3 inet manual
+
+# Container/Host management VLAN interface
+auto ens3.10
+iface ens3.10 inet manual
+    vlan-raw-device ens3
+
+# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
+auto ens3.30
+iface ens3.30 inet manual
+    vlan-raw-device ens3
+
+# Storage network VLAN interface (optional)
+auto ens3.20
+iface ens3.20 inet manual
+    vlan-raw-device ens3
+
+# Container/Host management bridge
+auto br-mgmt
+iface br-mgmt inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3.10
+    address {{host_info[inventory_hostname].MGMT_IP}}
+    netmask 255.255.252.0
+
+# OpenStack Networking VXLAN (tunnel/overlay) bridge
+#
+# Only the COMPUTE and NETWORK nodes must have an IP address
+# on this bridge. When used by infrastructure nodes, the
+# IP addresses are assigned to containers which use this
+# bridge.
+#
+auto br-vxlan
+iface br-vxlan inet manual
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3.30
+
+# OpenStack Networking VLAN bridge
+auto br-vlan
+iface br-vlan inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3
+    address {{host_info[inventory_hostname].VLAN_IP}}
+    netmask 255.255.255.0
+    gateway 192.168.122.1
+    dns-nameserver 8.8.8.8 8.8.4.4
+
+# compute1 Storage bridge
+auto br-storage
+iface br-storage inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3.20
+    address {{host_info[inventory_hostname].STORAGE_IP}}
+    netmask 255.255.252.0
diff --git a/xci/template/opnfv.interface.j2 b/xci/template/opnfv.interface.j2
index e69de29b..74aeea99 100644
--- a/xci/template/opnfv.interface.j2
+++ b/xci/template/opnfv.interface.j2
@@ -0,0 +1,71 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# Physical interface
+auto ens3
+iface ens3 inet manual
+
+# Container/Host management VLAN interface
+auto ens3.10
+iface ens3.10 inet manual
+    vlan-raw-device ens3
+
+# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface
+auto ens3.30
+iface ens3.30 inet manual
+    vlan-raw-device ens3
+
+# Storage network VLAN interface (optional)
+auto ens3.20
+iface ens3.20 inet manual
+    vlan-raw-device ens3
+
+# Container/Host management bridge
+auto br-mgmt
+iface br-mgmt inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3.10
+    address {{host_info[inventory_hostname].MGMT_IP}}
+    netmask 255.255.252.0
+
+# OpenStack Networking VXLAN (tunnel/overlay) bridge
+#
+# Only the COMPUTE and NETWORK nodes must have an IP address
+# on this bridge. When used by infrastructure nodes, the
+# IP addresses are assigned to containers which use this
+# bridge.
+#
+auto br-vxlan
+iface br-vxlan inet manual
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3.30
+
+# OpenStack Networking VLAN bridge
+auto br-vlan
+iface br-vlan inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3
+    address {{host_info[inventory_hostname].VLAN_IP}}
+    netmask 255.255.255.0
+    gateway 192.168.122.1
+    dns-nameserver 8.8.8.8 8.8.4.4
+
+# compute1 Storage bridge
+auto br-storage
+iface br-storage inet static
+    bridge_stp off
+    bridge_waitport 0
+    bridge_fd 0
+    bridge_ports ens3.20
+    address {{host_info[inventory_hostname].STORAGE_IP}}
+    netmask 255.255.252.0