From c7fb3e83dd28a42cb0d15c649ec381dbdac6a0fa Mon Sep 17 00:00:00 2001 From: Fatih Degirmenci Date: Wed, 29 Mar 2017 16:59:02 +0200 Subject: xci: Add main playbooks and files This patch adds the main/common playbooks, files, and templates to be used for all flavors. The provisioning and OpenStack installation process will be as below - provision VMs for flavor using bifrost - once the VMs are provisioned, configure-localhost.yml playbook will be run, preparing the localhost in order to ensure the right playbooks (configure-opnfvhost.yml and configure-targethosts.yml), inventory files and var files are in place before we proceed with configuring opnfv host. - after getting the right files for the flavor, opnfv host will be configured using configure-opnfvhost.yml playbook. - finally, the target hosts will be configured. - once the above process is completed, openstack-ansible playbooks will be run, setting up hosts, infrastructure and OpenStack. Change-Id: I6e08b2cfdab9627f765e6fc414917b09f953cab2 Signed-off-by: Fatih Degirmenci --- xci/template/compute.interface.j2 | 86 ++++++++++++++++++++++++++++++++++++ xci/template/controller.interface.j2 | 71 +++++++++++++++++++++++++++++ xci/template/opnfv.interface.j2 | 71 +++++++++++++++++++++++++++++ 3 files changed, 228 insertions(+) (limited to 'xci/template') diff --git a/xci/template/compute.interface.j2 b/xci/template/compute.interface.j2 index e69de29b..1719f6a0 100644 --- a/xci/template/compute.interface.j2 +++ b/xci/template/compute.interface.j2 @@ -0,0 +1,86 @@ +# This file describes the network interfaces available on your system +# and how to activate them. For more information, see interfaces(5). + +# The loopback network interface +auto lo +iface lo inet loopback + + +# Physical interface +auto ens3 +iface ens3 inet manual + +# Container/Host management VLAN interface +auto ens3.10 +iface ens3.10 inet manual + vlan-raw-device ens3 + +# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface +auto ens3.30 +iface ens3.30 inet manual + vlan-raw-device ens3 + +# Storage network VLAN interface (optional) +auto ens3.20 +iface ens3.20 inet manual + vlan-raw-device ens3 + +# Container/Host management bridge +auto br-mgmt +iface br-mgmt inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3.10 + address {{host_info[inventory_hostname].MGMT_IP}} + netmask 255.255.252.0 + +# compute1 VXLAN (tunnel/overlay) bridge config +auto br-vxlan +iface br-vxlan inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3.30 + address {{host_info[inventory_hostname].VXLAN_IP}} + netmask 255.255.252.0 + +# OpenStack Networking VLAN bridge +auto br-vlan +iface br-vlan inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3 + address {{host_info[inventory_hostname].VLAN_IP}} + netmask 255.255.255.0 + gateway 192.168.122.1 + offload-sg off + # Create veth pair, don't bomb if already exists + pre-up ip link add br-vlan-veth type veth peer name eth12 || true + # Set both ends UP + pre-up ip link set br-vlan-veth up + pre-up ip link set eth12 up + # Delete veth pair on DOWN + post-down ip link del br-vlan-veth || true + bridge_ports br-vlan-veth + +# Add an additional address to br-vlan +iface br-vlan inet static + # Flat network default gateway + # -- This needs to exist somewhere for network reachability + # -- from the router namespace for floating IP paths. + # -- Putting this here is primarily for tempest to work. + address {{host_info[inventory_hostname].VLAN_IP_SECOND}} + netmask 255.255.252.0 + dns-nameserver 8.8.8.8 8.8.4.4 + +# compute1 Storage bridge +auto br-storage +iface br-storage inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3.20 + address {{host_info[inventory_hostname].STORAGE_IP}} + netmask 255.255.252.0 diff --git a/xci/template/controller.interface.j2 b/xci/template/controller.interface.j2 index e69de29b..74aeea99 100644 --- a/xci/template/controller.interface.j2 +++ b/xci/template/controller.interface.j2 @@ -0,0 +1,71 @@ +# This file describes the network interfaces available on your system +# and how to activate them. For more information, see interfaces(5). + +# The loopback network interface +auto lo +iface lo inet loopback + +# Physical interface +auto ens3 +iface ens3 inet manual + +# Container/Host management VLAN interface +auto ens3.10 +iface ens3.10 inet manual + vlan-raw-device ens3 + +# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface +auto ens3.30 +iface ens3.30 inet manual + vlan-raw-device ens3 + +# Storage network VLAN interface (optional) +auto ens3.20 +iface ens3.20 inet manual + vlan-raw-device ens3 + +# Container/Host management bridge +auto br-mgmt +iface br-mgmt inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3.10 + address {{host_info[inventory_hostname].MGMT_IP}} + netmask 255.255.252.0 + +# OpenStack Networking VXLAN (tunnel/overlay) bridge +# +# Only the COMPUTE and NETWORK nodes must have an IP address +# on this bridge. When used by infrastructure nodes, the +# IP addresses are assigned to containers which use this +# bridge. +# +auto br-vxlan +iface br-vxlan inet manual + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3.30 + +# OpenStack Networking VLAN bridge +auto br-vlan +iface br-vlan inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3 + address {{host_info[inventory_hostname].VLAN_IP}} + netmask 255.255.255.0 + gateway 192.168.122.1 + dns-nameserver 8.8.8.8 8.8.4.4 + +# compute1 Storage bridge +auto br-storage +iface br-storage inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3.20 + address {{host_info[inventory_hostname].STORAGE_IP}} + netmask 255.255.252.0 diff --git a/xci/template/opnfv.interface.j2 b/xci/template/opnfv.interface.j2 index e69de29b..74aeea99 100644 --- a/xci/template/opnfv.interface.j2 +++ b/xci/template/opnfv.interface.j2 @@ -0,0 +1,71 @@ +# This file describes the network interfaces available on your system +# and how to activate them. For more information, see interfaces(5). + +# The loopback network interface +auto lo +iface lo inet loopback + +# Physical interface +auto ens3 +iface ens3 inet manual + +# Container/Host management VLAN interface +auto ens3.10 +iface ens3.10 inet manual + vlan-raw-device ens3 + +# OpenStack Networking VXLAN (tunnel/overlay) VLAN interface +auto ens3.30 +iface ens3.30 inet manual + vlan-raw-device ens3 + +# Storage network VLAN interface (optional) +auto ens3.20 +iface ens3.20 inet manual + vlan-raw-device ens3 + +# Container/Host management bridge +auto br-mgmt +iface br-mgmt inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3.10 + address {{host_info[inventory_hostname].MGMT_IP}} + netmask 255.255.252.0 + +# OpenStack Networking VXLAN (tunnel/overlay) bridge +# +# Only the COMPUTE and NETWORK nodes must have an IP address +# on this bridge. When used by infrastructure nodes, the +# IP addresses are assigned to containers which use this +# bridge. +# +auto br-vxlan +iface br-vxlan inet manual + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3.30 + +# OpenStack Networking VLAN bridge +auto br-vlan +iface br-vlan inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3 + address {{host_info[inventory_hostname].VLAN_IP}} + netmask 255.255.255.0 + gateway 192.168.122.1 + dns-nameserver 8.8.8.8 8.8.4.4 + +# compute1 Storage bridge +auto br-storage +iface br-storage inet static + bridge_stp off + bridge_waitport 0 + bridge_fd 0 + bridge_ports ens3.20 + address {{host_info[inventory_hostname].STORAGE_IP}} + netmask 255.255.252.0 -- cgit 1.2.3-korg