Creating a template scenario installation file for Colorado.

Aside from my likely copywright infringements, please review/comment.
The basic idea is we create a "master" versions for each colorado installer then each scenario
derives from the master files to produce their own.  The template is intentionally modular for
that purpose.

Change-Id: Ic5ca72ece8eb462e6e6e7307d3cde32ea7760b23
Signed-off-by: ChristopherPrice <christopher.price@ericsson.com>

12 files changed, 1330 insertions, 0 deletions

diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/abstract.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/abstract.rst
new file mode 100644
index 000000000..ae15012ca
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/abstract.rst
@@ -0,0 +1,15 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+Abstract
+========
+.. Provide a brief abstract of the document and what it provides, in this case a
+.. vanilla opnfv deployment using fuel is provided as a template.  This template is
+.. not accurate and does not provide instructions to deploy a Colorado scenario.
+
+This document describes how to install the <template> scenario of the Colorado
+release of OPNFV.
+
+The <template> scenario will use Fuel as a deployment tool, installing and deploying an OPNFV
+based OpenStack in high availability on a Pharos compliant infrastructure.
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst
new file mode 100644
index 000000000..4889d8380
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst
@@ -0,0 +1,32 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+
+Verify Networks
+---------------
+
+It is important that the Verify Networks action is performed as it will verify
+that communicate works for the networks you have setup, as well as check that
+packages needed for a successful deployment can be fetched.
+
+#. From the FUEL UI in your Environment, Select the Networks Tab and select "Connectivity check" on the left pane
+
+   - Select <Verify Networks>
+
+   - Continue to fix your topology (physical switch, etc) until the "Verification Succeeded" and "Your network is configured correctly" message is shown
+
+Deploy Your Environment
+-----------------------
+
+38. Deploy the environment.
+
+    - In the Fuel GUI, click on the "Dashboard" Tab.
+
+    - Click on <Deploy Changes> in the "Ready to Deploy?" section
+
+    - Examine any information notice that pops up and click <Deploy>
+
+    Wait for your deployment to complete, you can view the "Dashboard"
+    Tab to see the progress and status of your deployment.
+
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst
new file mode 100644
index 000000000..082d4e96b
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst
@@ -0,0 +1,85 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+Hardware requirements
+=====================
+
+The following minimum hardware requirements must be met for the
+installation of <template> scenario:
+
++--------------------+------------------------------------------------------+
+| **HW Aspect**      | **Requirement**                                      |
+|                    |                                                      |
++====================+======================================================+
+| **# of nodes**     | Minimum 5 (3 for non redundant deployment):          |
+|                    |                                                      |
+|                    | - 1 Fuel deployment master (may be virtualized)      |
+|                    |                                                      |
+|                    | - 3(1) Controllers (1 colocated mongo/ceilometer     |
+|                    |   role, 2 Ceph-OSD roles)                            |
+|                    |                                                      |
+|                    | - 1 Compute (1 co-located Ceph-OSD role)             |
+|                    |                                                      |
++--------------------+------------------------------------------------------+
+| **CPU**            | Minimum 1 socket x86_AMD64 with Virtualization       |
+|                    | support                                              |
++--------------------+------------------------------------------------------+
+| **RAM**            | Minimum 16GB/server (Depending on VNF work load)     |
+|                    |                                                      |
++--------------------+------------------------------------------------------+
+| **Disk**           | Minimum 256GB 10kRPM spinning disks                  |
+|                    |                                                      |
++--------------------+------------------------------------------------------+
+| **Networks**       | 4 Tagged VLANs (PUBLIC, MGMT, STORAGE, PRIVATE)      |
+|                    |                                                      |
+|                    | 1 Un-Tagged VLAN for PXE Boot - ADMIN Network        |
+|                    |                                                      |
+|                    | Note: These can be allocated to a single NIC -       |
+|                    | or spread out over multiple NICs as your hardware    |
+|                    | supports.                                            |
++--------------------+------------------------------------------------------+
+
+Help with Hardware Requirements
+===============================
+
+Calculate hardware requirements:
+
+For information on compatible hardware types available for use, please see *Reference: 11*.
+
+When choosing the hardware on which you will deploy your OpenStack
+environment, you should think about:
+
+- CPU -- Consider the number of virtual machines that you plan to deploy in your cloud environment and the CPU per virtual machine.
+
+- Memory -- Depends on the amount of RAM assigned per virtual machine and the controller node.
+
+- Storage -- Depends on the local drive space per virtual machine, remote volumes that can be attached to a virtual machine, and object storage.
+
+- Networking -- Depends on the Choose Network Topology, the network bandwidth per virtual machine, and network storage.
+
+
+Top of the rack (TOR) Configuration requirements
+================================================
+
+The switching infrastructure provides connectivity for the OPNFV
+infrastructure operations, tenant networks (East/West) and provider
+connectivity (North/South); it also provides needed connectivity for
+the Storage Area Network (SAN).
+To avoid traffic congestion, it is strongly suggested that three
+physically separated networks are used, that is: 1 physical network
+for administration and control, one physical network for tenant private
+and public networks, and one physical network for SAN.
+The switching connectivity can (but does not need to) be fully redundant,
+in such case it comprises a redundant 10GE switch pair for each of the
+three physically separated networks.
+
+The physical TOR switches are **not** automatically configured from
+the Fuel OPNFV reference platform. All the networks involved in the OPNFV
+infrastructure as well as the provider networks and the private tenant
+VLANs needs to be manually configured.
+
+Manual configuration of the Brahmaputra hardware platform should
+be carried out according to the OPNFV Pharos specification:
+<https://wiki.opnfv.org/pharos/pharos_specification>
+
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/index.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/index.rst
new file mode 100644
index 000000000..0e24d435e
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/index.rst
@@ -0,0 +1,24 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Christopher Price Ericsson AB
+
+========================================================================================================
+OPNFV Installation instruction for the template-os-nosdn-nofeature-ha scenario
+========================================================================================================
+
+.. toctree::
+   :numbered:
+   :maxdepth: 2
+
+   abstract.rst
+   introduction.rst
+   preparation.rst
+   hardware.requirements.rst
+   installation.rst
+   install.config.rst
+   install.optional.rst
+   deployment.rst
+   post.deploy.rst
+   references.rst
+
+
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst
new file mode 100644
index 000000000..17200d5c2
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.config.rst
@@ -0,0 +1,156 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+Configure the network environment
+---------------------------------
+
+#. Open the environment you previously created.
+
+#. Open the networks tab and select the "default Node Networks group to" on the left pane.
+
+#. Update the Public network configuration and change the following fields to appropriate values:
+
+   - CIDR to <CIDR for Public IP Addresses>
+
+   - IP Range Start to <Public IP Address start>
+
+   - IP Range End to <Public IP Address end>
+
+   - Gateway to <Gateway for Public IP Addresses>
+
+   - Check <VLAN tagging>.
+
+   - Set appropriate VLAN id.
+
+#. Update the Storage Network Configuration
+
+   - Set CIDR to appropriate value  (default 192.168.1.0/24)
+
+   - Set IP Range Start to appropriate value (default 192.168.1.1)
+
+   - Set IP Range End to appropriate value (default 192.168.1.254)
+
+   - Set vlan to appropriate value  (default 102)
+
+#. Update the Management network configuration.
+
+   - Set CIDR to appropriate value (default 192.168.0.0/24)
+
+   - Set IP Range Start to appropriate value (default 192.168.0.1)
+
+   - Set IP Range End to appropriate value (default 192.168.0.254)
+
+   - Check <VLAN tagging>.
+
+   - Set appropriate VLAN id. (default 101)
+
+#. Update the Private Network Information
+
+   - Set CIDR to appropriate value (default 192.168.2.0/24
+
+   - Set IP Range Start to appropriate value (default 192.168.2.1)
+
+   - Set IP Range End to appropriate value (default 192.168.2.254)
+
+   - Check <VLAN tagging>.
+
+   - Set appropriate VLAN tag (default 103)
+
+#. Select the "Neutron L3 Node Networks group" on the left pane.
+
+#. Update the Floating Network configuration.
+
+   - Set the Floating IP range start (default 172.16.0.130)
+
+   - Set the Floating IP range end (default 172.16.0.254)
+
+   - Set the Floating network name (default admin_floating_net)
+
+#. Update the Internal Network configuration.
+
+   - Set Internal network CIDR to an appropriate value (default 192.168.111.0/24)
+
+   - Set Internal network gateway to an appropriate value
+
+   - Set the Internal network name (default admin_internal_net)
+
+#. Update the Guest OS DNS servers.
+
+   - Set Guest OS DNS Server values appropriately
+
+#. Save Settings.
+
+#. Select the "Other Node Networks group" on the left pane.
+
+#. Update the Public network assignment.
+
+   - Check the box for "Assign public network to all nodes" (Required by OpenDaylight)
+
+#. Update Host OS DNS Servers.
+
+   - Provide the DNS server settings
+
+#. Update Host OS NTP Servers.
+
+   - Provide the NTP server settings
+
+Select Hypervisor type
+----------------------
+
+#. In the FUEL UI of your Environment, click the "Settings" Tab
+
+#. Select Compute on the left side pane
+
+   - Check the KVM box and press "Save settings"
+
+Enable Plugins
+--------------
+
+#. In the FUEL UI of your Environment, click the "Settings" Tab
+
+#. Select Other on the left side pane
+
+   - Enable and configure the plugins of your choice
+
+Allocate nodes to environment and assign functional roles
+---------------------------------------------------------
+
+#. Click on the "Nodes" Tab in the FUEL WEB UI.
+
+#. Assign roles.
+
+    - Click on the <+Add Nodes> button
+
+    - Check <Controller>, <Telemetry - MongoDB>  and optionally an SDN Controller role (OpenDaylight controller/ONOS) in the Assign Roles Section.
+
+    - Check one node which you want to act as a Controller from the bottom half of the screen
+
+    - Click <Apply Changes>.
+
+    - Click on the <+Add Nodes> button
+
+    - Check the <Controller> and <Storage - Ceph OSD> roles.
+
+    - Check the two next nodes you want to act as Controllers from the bottom half of the screen
+
+    - Click <Apply Changes>
+
+    - Click on <+Add Nodes> button
+
+    - Check the <Compute> and <Storage - Ceph OSD> roles.
+
+    - Check the Nodes you want to act as Computes from the bottom half of the screen
+
+    - Click <Apply Changes>.
+
+#. Configure interfaces.
+
+    - Check Select <All> to select all allocated nodes
+
+    - Click <Configure Interfaces>
+
+    - Assign interfaces (bonded) for mgmt-, admin-, private-, public-
+      and storage networks
+
+    - Click <Apply>
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst
new file mode 100644
index 000000000..ed9eaf8d2
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/install.optional.rst
@@ -0,0 +1,73 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+
+OPTIONAL - Set Local Mirror Repos
+---------------------------------
+
+The following steps can be executed if you are in an environment with
+no connection to the Internet. The Fuel server delivers a local repo
+that can be used for installation / deployment of openstack.
+
+#. In the Fuel UI of your Environment, click the Settings Tab and select General from the left pane.
+
+   - Replace the URI values for the "Name" values outlined below:
+
+   - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main"
+
+   - "ubuntu-security" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-security main"
+
+   - "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-updates main"
+
+   - "mos" URI="deb http://<ip-of-fuel-server>::8080/liberty-8.0/ubuntu/x86_64 mos8.0 main restricted"
+
+   - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/liberty-8.0/ubuntu/auxiliary auxiliary main restricted"
+
+   - Click <Save Settings> at the bottom to Save your changes
+
+Target specific configuration
+-----------------------------
+
+#. Set up targets for provisioning with non-default "Offloading Modes"
+
+   Some target nodes may require additional configuration after they are
+   PXE booted (bootstrapped); the most frequent changes are in defaults
+   for ethernet devices' "Offloading Modes" settings (e.g. some targets'
+   ethernet drivers may strip VLAN traffic by default).
+
+   If your target ethernet drivers have wrong "Offloading Modes" defaults,
+   in "Configure interfaces" page (described above), expand affected
+   interface's "Offloading Modes" and [un]check the relevant settings:
+
+#. Set up targets for "Verify Networks" with non-default "Offloading Modes"
+
+   **NOTE**: Check *Reference 15* for an updated and comprehensive list of
+   known issues and/or limitations, including "Offloading Modes" not being
+   applied during "Verify Networks" step.
+
+   Setting custom "Offloading Modes" in Fuel GUI will only apply those settings
+   during provisioning and **not** during "Verify Networks", so if your targets
+   need this change, you have to apply "Offloading Modes" settings by hand
+   to bootstrapped nodes.
+
+   **E.g.**: Our driver has "rx-vlan-filter" default "on" (expected "off") on
+   the openstack interface(s) "eth1", preventing VLAN traffic from passing
+   during "Verify Networks".
+
+   - From Fuel master console identify target nodes admin IPs:
+
+     .. code-block:: bash
+
+         $ fuel nodes
+
+
+   - SSH into each of the target nodes and disable "rx-vlan-filter" on the
+     affected physical interface(s) allocated for OpenStack traffic (eth1):
+
+     .. code-block:: bash
+
+         $ ssh root@10.20.0.6 ethtool -K eth1 rx-vlan-filter off
+
+   - Repeat the step above for all affected nodes/interfaces in the POD.
+
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation-instruction.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation-instruction.rst
new file mode 100644
index 000000000..b5383327b
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation-instruction.rst
@@ -0,0 +1,608 @@
+========================================================================================================
+OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+========================================================================================================
+
+License
+=======
+
+This work is licensed under a Creative Commons Attribution 4.0 International
+License. .. http://creativecommons.org/licenses/by/4.0 ..
+(c) Jonas Bjurel (Ericsson AB) and others
+
+Abstract
+========
+
+This document describes how to install the Brahmaputra release of
+OPNFV when using Fuel as a deployment tool, covering  it's usage,
+limitations, dependencies and required system resources.
+
+Introduction
+============
+
+This document provides guidelines on how to install and
+configure the Brahmaputra release of OPNFV when using Fuel as a
+deployment tool, including required software and hardware configurations.
+
+Although the available installation options give a high degree of
+freedom in how the system is set-up, including architecture, services
+and features, etc., said permutations may not provide an OPNFV
+compliant reference architecture. This instruction provides a
+step-by-step guide that results in an OPNFV Brahmaputra compliant
+deployment.
+
+The audience of this document is assumed to have good knowledge in
+networking and Unix/Linux administration.
+
+Hardware requirements
+=====================
+
+The following minimum hardware requirements must be met for the
+installation of Brahmaputra using Fuel:
+
++--------------------+------------------------------------------------------+
+| **HW Aspect**      | **Requirement**                                      |
+|                    |                                                      |
++====================+======================================================+
+| **# of nodes**     | Minimum 5 (3 for non redundant deployment):          |
+|                    |                                                      |
+|                    | - 1 Fuel deployment master (may be virtualized)      |
+|                    |                                                      |
+|                    | - 3(1) Controllers (1 colocated mongo/ceilometer     |
+|                    |   role, 2 Ceph-OSD roles)                            |
+|                    |                                                      |
+|                    | - 1 Compute (1 co-located Ceph-OSD role)             |
+|                    |                                                      |
++--------------------+------------------------------------------------------+
+| **CPU**            | Minimum 1 socket x86_AMD64 with Virtualization       |
+|                    | support                                              |
++--------------------+------------------------------------------------------+
+| **RAM**            | Minimum 16GB/server (Depending on VNF work load)     |
+|                    |                                                      |
++--------------------+------------------------------------------------------+
+| **Disk**           | Minimum 256GB 10kRPM spinning disks                  |
+|                    |                                                      |
++--------------------+------------------------------------------------------+
+| **Networks**       | 4 Tagged VLANs (PUBLIC, MGMT, STORAGE, PRIVATE)      |
+|                    |                                                      |
+|                    | 1 Un-Tagged VLAN for PXE Boot - ADMIN Network        |
+|                    |                                                      |
+|                    | Note: These can be allocated to a single NIC -       |
+|                    | or spread out over multiple NICs as your hardware    |
+|                    | supports.                                            |
++--------------------+------------------------------------------------------+
+
+Help with Hardware Requirements
+===============================
+
+Calculate hardware requirements:
+
+For information on compatible hardware types available for use, please see *Reference: 11*.
+
+When choosing the hardware on which you will deploy your OpenStack
+environment, you should think about:
+
+- CPU -- Consider the number of virtual machines that you plan to deploy in your cloud environment and the CPU per virtual machine.
+
+- Memory -- Depends on the amount of RAM assigned per virtual machine and the controller node.
+
+- Storage -- Depends on the local drive space per virtual machine, remote volumes that can be attached to a virtual machine, and object storage.
+
+- Networking -- Depends on the Choose Network Topology, the network bandwidth per virtual machine, and network storage.
+
+
+Top of the rack (TOR) Configuration requirements
+================================================
+
+The switching infrastructure provides connectivity for the OPNFV
+infrastructure operations, tenant networks (East/West) and provider
+connectivity (North/South); it also provides needed connectivity for
+the Storage Area Network (SAN).
+To avoid traffic congestion, it is strongly suggested that three
+physically separated networks are used, that is: 1 physical network
+for administration and control, one physical network for tenant private
+and public networks, and one physical network for SAN.
+The switching connectivity can (but does not need to) be fully redundant,
+in such case it comprises a redundant 10GE switch pair for each of the
+three physically separated networks.
+
+The physical TOR switches are **not** automatically configured from
+the Fuel OPNFV reference platform. All the networks involved in the OPNFV
+infrastructure as well as the provider networks and the private tenant
+VLANs needs to be manually configured.
+
+Manual configuration of the Brahmaputra hardware platform should
+be carried out according to the OPNFV Pharos specification:
+<https://wiki.opnfv.org/pharos/pharos_specification>
+
+OPNFV Software installation and deployment
+==========================================
+
+This section describes the installation of the OPNFV installation
+server (Fuel master) as well as the deployment of the full OPNFV
+reference platform stack across a server cluster.
+
+Install Fuel master
+-------------------
+#. Mount the Brahmaputra Fuel ISO file/media as a boot device to the jump host server.
+
+#. Reboot the jump host to establish the Fuel server.
+
+   - The system now boots from the ISO image.
+
+   - Select "Fuel Install (Static IP)" (See figure below)
+
+   - Press [Enter].
+
+   .. figure:: img/grub-1.png
+
+#. Wait until screen Fuel setup is shown (Note: This can take up to 30 minutes).
+
+#. In the "Fuel User" section - Confirm/change the default password (See figure below)
+
+   - Enter "admin" in the Fuel password input
+
+   - Enter "admin" in the Confirm password input
+
+   - Select "Check" and press [Enter]
+
+   .. figure:: img/fuelmenu1.png
+
+#. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP in your corporate/lab network (see figure below).
+
+   - Configure eth1 or other network interfaces here as well (if you have them present on your FUEL server).
+
+   .. figure:: img/fuelmenu2.png
+
+#. In the "PXE Setup" section (see figure below) - Change the following fields to appropriate values (example below):
+
+   - DHCP Pool Start 10.20.0.3
+
+   - DHCP Pool End 10.20.0.254
+
+   - DHCP Pool Gateway  10.20.0.2 (IP address of Fuel node)
+
+   .. figure:: img/fuelmenu3.png
+
+#. In the "DNS & Hostname" section (see figure below) - Change the following fields to appropriate values:
+
+   - Hostname
+
+   - Domain
+
+   - Search Domain
+
+   - External DNS
+
+   - Hostname to test DNS
+
+   - Select <Check> and press [Enter]
+
+   .. figure:: img/fuelmenu4.png
+
+
+#. OPTION TO ENABLE PROXY SUPPORT - In the "Bootstrap Image" section (see figure below), edit the following fields to define a proxy. (**NOTE:** cannot be used in tandem with local repository support)
+
+   - Navigate to "HTTP proxy" and enter your http proxy address
+
+   - Select <Check> and press [Enter]
+
+   .. figure:: img/fuelmenu5.png
+
+#. In the "Time Sync" section (see figure below) - Change the following fields to appropriate values:
+
+   - NTP Server 1 <Customer NTP server 1>
+
+   - NTP Server 2 <Customer NTP server 2>
+
+   - NTP Server 3 <Customer NTP server 3>
+
+   .. figure:: img/fuelmenu6.png
+
+#. Start the installation.
+
+   - Select Quit Setup and press Save and Quit.
+
+   - Installation starts, wait until the login screen is shown.
+
+
+Boot the Node Servers
+---------------------
+
+After the Fuel Master node has rebooted from the above steps and is at
+the login prompt, you should boot the Node Servers (Your
+Compute/Control/Storage blades (nested or real) with a PXE booting
+scheme so that the FUEL Master can pick them up for control.
+
+#. Enable PXE booting
+
+   - For every controller and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu and hard disk as the second boot device in the same menu.
+
+#. Reboot all the control and compute blades.
+
+#. Wait for the availability of nodes showing up in the Fuel GUI.
+
+   - Connect to the FUEL UI via the URL provided in the Console (default: https://10.20.0.2:8443)
+
+   - Wait until all nodes are displayed in top right corner of the Fuel GUI: Total nodes and Unallocated nodes (see figure below).
+
+   .. figure:: img/nodes.png
+
+
+Install additional Plugins/Features on the FUEL node
+----------------------------------------------------
+
+#. SSH to your FUEL node (e.g. root@10.20.0.2  pwd: r00tme)
+
+#. Select wanted plugins/features from the /opt/opnfv/ directory.
+
+#. Install the wanted plugin with the command "fuel plugins --install /opt/opnfv/<plugin-name>-<version>.<arch>.rpm"
+   Expected output: "Plugin ....... was successfully installed." (see figure below)
+
+   .. figure:: img/plugin_install.png
+
+Create an OpenStack Environment
+-------------------------------
+
+#. Connect to Fuel WEB UI with a browser (default: https://10.20.0.2:8443) (login admin/admin)
+
+#. Create and name a new OpenStack environment, to be installed.
+
+   .. figure:: img/newenv.png
+
+#. Select "<Liberty on Ubuntu 14.04>" and press <Next>
+
+#. Select "compute virtulization method".
+
+   - Select "QEMU-KVM as hypervisor" and press <Next>
+
+#. Select "network mode".
+
+   - Select "Neutron with ML2 plugin"
+
+   - Select "Neutron with tunneling segmentation" (Required when using the ODL or ONOS plugins)
+
+   - Press <Next>
+
+#. Select "Storage Back-ends".
+
+   - Select "Ceph for block storage" and press <Next>
+
+#. Select "additional services" you wish to install.
+
+   - Check option "Install Ceilometer (OpenStack Telemetry)" and press <Next>
+
+#. Create the new environment.
+
+   - Click <Create> Button
+
+Configure the network environment
+---------------------------------
+
+#. Open the environment you previously created.
+
+#. Open the networks tab and select the "default Node Networks group to" on the left pane (see figure below).
+
+   .. figure:: img/network.png
+
+#. Update the Public network configuration and change the following fields to appropriate values:
+
+   - CIDR to <CIDR for Public IP Addresses>
+
+   - IP Range Start to <Public IP Address start>
+
+   - IP Range End to <Public IP Address end>
+
+   - Gateway to <Gateway for Public IP Addresses>
+
+   - Check <VLAN tagging>.
+
+   - Set appropriate VLAN id.
+
+#. Update the Storage Network Configuration
+
+   - Set CIDR to appropriate value  (default 192.168.1.0/24)
+
+   - Set IP Range Start to appropriate value (default 192.168.1.1)
+
+   - Set IP Range End to appropriate value (default 192.168.1.254)
+
+   - Set vlan to appropriate value  (default 102)
+
+#. Update the Management network configuration.
+
+   - Set CIDR to appropriate value (default 192.168.0.0/24)
+
+   - Set IP Range Start to appropriate value (default 192.168.0.1)
+
+   - Set IP Range End to appropriate value (default 192.168.0.254)
+
+   - Check <VLAN tagging>.
+
+   - Set appropriate VLAN id. (default 101)
+
+#. Update the Private Network Information
+
+   - Set CIDR to appropriate value (default 192.168.2.0/24
+
+   - Set IP Range Start to appropriate value (default 192.168.2.1)
+
+   - Set IP Range End to appropriate value (default 192.168.2.254)
+
+   - Check <VLAN tagging>.
+
+   - Set appropriate VLAN tag (default 103)
+
+#. Select the "Neutron L3 Node Networks group" on the left pane.
+
+   .. figure:: img/neutronl3.png
+
+#. Update the Floating Network configuration.
+
+   - Set the Floating IP range start (default 172.16.0.130)
+
+   - Set the Floating IP range end (default 172.16.0.254)
+
+   - Set the Floating network name (default admin_floating_net)
+
+#. Update the Internal Network configuration.
+
+   - Set Internal network CIDR to an appropriate value (default 192.168.111.0/24)
+
+   - Set Internal network gateway to an appropriate value
+
+   - Set the Internal network name (default admin_internal_net)
+
+#. Update the Guest OS DNS servers.
+
+   - Set Guest OS DNS Server values appropriately
+
+#. Save Settings.
+
+#. Select the "Other Node Networks group" on the left pane(see figure below).
+
+   .. figure:: img/other.png
+
+#. Update the Public network assignment.
+
+   - Check the box for "Assign public network to all nodes" (Required by OpenDaylight)
+
+#. Update Host OS DNS Servers.
+
+   - Provide the DNS server settings
+
+#. Update Host OS NTP Servers.
+
+   - Provide the NTP server settings
+
+Select Hypervisor type
+----------------------
+
+#. In the FUEL UI of your Environment, click the "Settings" Tab
+
+#. Select Compute on the left side pane (see figure below)
+
+   - Check the KVM box and press "Save settings"
+
+   .. figure:: img/compute.png
+
+Enable Plugins
+--------------
+
+#. In the FUEL UI of your Environment, click the "Settings" Tab
+
+#. Select Other on the left side pane (see figure below)
+
+   - Enable and configure the plugins of your choice
+
+   .. figure:: img/plugins.png
+
+Allocate nodes to environment and assign functional roles
+---------------------------------------------------------
+
+#. Click on the "Nodes" Tab in the FUEL WEB UI (see figure below).
+
+    .. figure:: img/addnodes.png
+
+#. Assign roles (see figure below).
+
+    - Click on the <+Add Nodes> button
+
+    - Check <Controller>, <Telemetry - MongoDB>  and optionally an SDN Controller role (OpenDaylight controller/ONOS) in the Assign Roles Section.
+
+    - Check one node which you want to act as a Controller from the bottom half of the screen
+
+    - Click <Apply Changes>.
+
+    - Click on the <+Add Nodes> button
+
+    - Check the <Controller> and <Storage - Ceph OSD> roles.
+
+    - Check the two next nodes you want to act as Controllers from the bottom half of the screen
+
+    - Click <Apply Changes>
+
+    - Click on <+Add Nodes> button
+
+    - Check the <Compute> and <Storage - Ceph OSD> roles.
+
+    - Check the Nodes you want to act as Computes from the bottom half of the screen
+
+    - Click <Apply Changes>.
+
+    .. figure:: img/computelist.png
+
+#. Configure interfaces (see figure below).
+
+    - Check Select <All> to select all allocated nodes
+
+    - Click <Configure Interfaces>
+
+    - Assign interfaces (bonded) for mgmt-, admin-, private-, public-
+      and storage networks
+
+    - Click <Apply>
+
+    .. figure:: img/interfaceconf.png
+
+
+OPTIONAL - Set Local Mirror Repos
+---------------------------------
+
+The following steps can be executed if you are in an environment with
+no connection to the Internet. The Fuel server delivers a local repo
+that can be used for installation / deployment of openstack.
+
+#. In the Fuel UI of your Environment, click the Settings Tab and select General from the left pane.
+
+   - Replace the URI values for the "Name" values outlined below:
+
+   - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main"
+
+   - "ubuntu-security" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-security main"
+
+   - "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-updates main"
+
+   - "mos" URI="deb http://<ip-of-fuel-server>::8080/liberty-8.0/ubuntu/x86_64 mos8.0 main restricted"
+
+   - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/liberty-8.0/ubuntu/auxiliary auxiliary main restricted"
+
+   - Click <Save Settings> at the bottom to Save your changes
+
+Target specific configuration
+-----------------------------
+
+#. Set up targets for provisioning with non-default "Offloading Modes"
+
+   Some target nodes may require additional configuration after they are
+   PXE booted (bootstrapped); the most frequent changes are in defaults
+   for ethernet devices' "Offloading Modes" settings (e.g. some targets'
+   ethernet drivers may strip VLAN traffic by default).
+
+   If your target ethernet drivers have wrong "Offloading Modes" defaults,
+   in "Configure interfaces" page (described above), expand affected
+   interface's "Offloading Modes" and [un]check the relevant settings
+   (see figure below):
+
+   .. figure:: img/offloadingmodes.png
+
+#. Set up targets for "Verify Networks" with non-default "Offloading Modes"
+
+   **NOTE**: Check *Reference 15* for an updated and comprehensive list of
+   known issues and/or limitations, including "Offloading Modes" not being
+   applied during "Verify Networks" step.
+
+   Setting custom "Offloading Modes" in Fuel GUI will only apply those settings
+   during provisiong and **not** during "Verify Networks", so if your targets
+   need this change, you have to apply "Offloading Modes" settings by hand
+   to bootstrapped nodes.
+
+   **E.g.**: Our driver has "rx-vlan-filter" default "on" (expected "off") on
+   the Openstack interface(s) "eth1", preventing VLAN traffic from passing
+   during "Verify Networks".
+
+   - From Fuel master console identify target nodes admin IPs (see figure below):
+
+     .. code-block:: bash
+
+         $ fuel nodes
+
+     .. figure:: img/fuelconsole1.png
+
+   - SSH into each of the target nodes and disable "rx-vlan-filter" on the
+     affected physical interface(s) allocated for OpenStack traffic (eth1):
+
+     .. code-block:: bash
+
+         $ ssh root@10.20.0.6 ethtool -K eth1 rx-vlan-filter off
+
+   - Repeat the step above for all affected nodes/interfaces in the POD.
+
+Verify Networks
+---------------
+
+It is important that the Verify Networks action is performed as it will verify
+that communicate works for the networks you have setup, as well as check that
+packages needed for a successful deployment can be fetched.
+
+#. From the FUEL UI in your Environment, Select the Networks Tab and select "Connectivity check" on the left pane (see figure below)
+
+   - Select <Verify Networks>
+
+   - Continue to fix your topology (physical switch, etc) until the "Verification Succeeded" and "Your network is configured correctly" message is shown
+
+   .. figure:: img/verifynet.png
+
+
+Deploy Your Environment
+-----------------------
+
+38. Deploy the environment.
+
+    - In the Fuel GUI, click on the "Dashboard" Tab.
+
+    - Click on <Deploy Changes> in the "Ready to Deploy?" section
+
+    - Examine any information notice that pops up and click <Deploy>
+
+    Wait for your deployment to complete, you can view the "Dashboard"
+    Tab to see the progress and status of your deployment.
+
+Installation health-check
+=========================
+
+#. Perform system health-check (see figure below)
+
+    - Click the "Health Check" tab inside your Environment in the FUEL Web UI
+
+    - Check <Select All> and Click <Run Tests>
+
+    - Allow tests to run and investigate results where appropriate
+
+    .. figure:: img/health.png
+
+References
+==========
+
+OPNFV
+-----
+
+1) `OPNFV Home Page <http://www.opnfv.org>`_
+
+2) `OPNFV documentation- and software downloads <https://www.opnfv.org/software/download>`_
+
+OpenStack
+---------
+
+3) `OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
+
+4) `OpenStack documentation <http://docs.openstack.org>`_
+
+OpenDaylight
+------------
+
+5) `OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
+
+Fuel
+----
+6) `The Fuel OpenStack project <https://wiki.openstack.org/wiki/Fuel>`_
+
+7) `Fuel documentation overview <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/>`_
+
+8) `Fuel planning guide <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/mos-planning-guide.html>`_
+
+9) `Fuel quick start guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/quickstart-guide.html>`_
+
+10) `Fuel operations guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/operations.html>`_
+
+11) `Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>`_
+
+12) `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list>`_
+
+Fuel in OPNFV
+-------------
+
+13) `OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/installation-instruction.html>`_
+
+14) `OPNFV Build instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/build-instruction.html>`_
+
+15) `OPNFV Release Note for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/release-notes.html>`_
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
new file mode 100644
index 000000000..3387eacc3
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
@@ -0,0 +1,151 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+<template> software installation and deployment
+===============================================
+
+This section describes the installation of the OPNFV installation
+server (jumphost) as well as the deployment of the <template> OPNFV
+reference platform stack across a server cluster.
+
+Install jumphost
+----------------
+
+If you have not already done so, prepare your jumphost according the instructions in _#ref_Preparation
+this can be done using an ISO image with the following commands
+
+#. Mount the <template> ISO file/media as a boot device to the jump host server.
+
+#. Reboot the jump host to establish the jumphost server.
+
+   - The system now boots from the ISO image.
+
+   - Select "Fuel Install (Static IP)"
+
+   - Press [Enter].
+
+#. Wait until screen Fuel setup is shown (Note: This can take up to 30 minutes).
+
+At this time you can continue with the installation according to the following instructions.
+
+#. In the "Fuel User" section - Confirm/change the default password
+
+   - Enter "admin" in the Fuel password input
+
+   - Enter "admin" in the Confirm password input
+
+   - Select "Check" and press [Enter]
+
+#. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP in your corporate/lab network.
+
+   - Configure eth1 or other network interfaces here as well (if you have them present on your FUEL server).
+
+#. In the "PXE Setup" section - Change the following fields to appropriate values (example below):
+
+   - DHCP Pool Start 10.20.0.3
+
+   - DHCP Pool End 10.20.0.254
+
+   - DHCP Pool Gateway  10.20.0.2 (IP address of Fuel node)
+
+#. In the "DNS & Hostname" section - Change the following fields to appropriate values:
+
+   - Hostname
+
+   - Domain
+
+   - Search Domain
+
+   - External DNS
+
+   - Hostname to test DNS
+
+   - Select <Check> and press [Enter]
+
+
+#. OPTION TO ENABLE PROXY SUPPORT - In the "Bootstrap Image" section, edit the following fields to define a proxy. (**NOTE:** cannot be used in tandem with local repository support)
+
+   - Navigate to "HTTP proxy" and enter your http proxy address
+
+   - Select <Check> and press [Enter]
+
+#. In the "Time Sync" section - Change the following fields to appropriate values:
+
+   - NTP Server 1 <Customer NTP server 1>
+
+   - NTP Server 2 <Customer NTP server 2>
+
+   - NTP Server 3 <Customer NTP server 3>
+
+#. Start the installation.
+
+   - Select Quit Setup and press Save and Quit.
+
+   - Installation starts, wait until the login screen is shown.
+
+
+Boot the Node Servers
+---------------------
+
+After the Fuel Master node has rebooted from the above steps and is at
+the login prompt, you should boot the Node Servers (Your
+Compute/Control/Storage blades (nested or real) with a PXE booting
+scheme so that the FUEL Master can pick them up for control.
+
+#. Enable PXE booting
+
+   - For every controller and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu and hard disk as the second boot device in the same menu.
+
+#. Reboot all the control and compute blades.
+
+#. Wait for the availability of nodes showing up in the Fuel GUI.
+
+   - Connect to the FUEL UI via the URL provided in the Console (default: https://10.20.0.2:8443)
+
+   - Wait until all nodes are displayed in top right corner of the Fuel GUI: Total nodes and Unallocated nodes.
+
+
+Install additional Plugins/Features on the FUEL node
+----------------------------------------------------
+
+#. SSH to your FUEL node (e.g. root@10.20.0.2  pwd: r00tme)
+
+#. Select wanted plugins/features from the /opt/opnfv/ directory.
+
+#. Install the wanted plugin with the command "fuel plugins --install /opt/opnfv/<plugin-name>-<version>.<arch>.rpm"
+   Expected output: "Plugin ....... was successfully installed."
+
+Create an OpenStack Environment
+-------------------------------
+
+#. Connect to Fuel WEB UI with a browser (default: https://10.20.0.2:8443) (login admin/admin)
+
+#. Create and name a new OpenStack environment, to be installed.
+
+#. Select "<Liberty on Ubuntu 14.04>" and press <Next>
+
+#. Select "compute virtulization method".
+
+   - Select "QEMU-KVM as hypervisor" and press <Next>
+
+#. Select "network mode".
+
+   - Select "Neutron with ML2 plugin"
+
+   - Select "Neutron with tunneling segmentation" (Required when using the ODL or ONOS plugins)
+
+   - Press <Next>
+
+#. Select "Storage Back-ends".
+
+   - Select "Ceph for block storage" and press <Next>
+
+#. Select "additional services" you wish to install.
+
+   - Check option "Install Ceilometer (OpenStack Telemetry)" and press <Next>
+
+#. Create the new environment.
+
+   - Click <Create> Button
+
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/introduction.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/introduction.rst
new file mode 100644
index 000000000..fffe5e867
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/introduction.rst
@@ -0,0 +1,18 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+Introduction
+============
+
+This document provides guidelines on how to install and configure the
+<template> scenario of OPNFV including required software and hardware configurations.
+
+Although the available installation options give a high degree of
+freedom in how the system is set-up, including architecture, services
+and features, etc., said permutations may not provide an OPNFV
+compliant reference architecture. This instruction provides a
+step-by-step guide that results in an OPNFV Compliant deployment.
+
+The audience of this document is assumed to have good knowledge in
+networking and Unix/Linux administration.
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/post.deploy.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/post.deploy.rst
new file mode 100644
index 000000000..752db6c9e
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/post.deploy.rst
@@ -0,0 +1,16 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+
+Installation health-check
+=========================
+
+#. Perform system health-check (see figure below)
+
+    - Click the "Health Check" tab inside your Environment in the FUEL Web UI
+
+    - Check <Select All> and Click <Run Tests>
+
+    - Allow tests to run and investigate results where appropriate
+
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst
new file mode 100644
index 000000000..c546a35f3
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst
@@ -0,0 +1,101 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+Preparation
+===========
+.. Not all of these options are relevant for all scenario's.  I advise following the
+.. instructions applicable to the deploy tool used in the scenario.
+
+Before starting the installation of the <template> scenario some preparation must
+be done.  You may choose to install the <template> scenario using an ISO image, or
+executing the installation from a prepared jumphost.
+
+Preparing your jumphost to install by script
+--------------------------------------------
+
+To deploy the <template> scenario from a script you will need to prepare the jumphost
+with a compatible operating system.  Prepare your jumphost running CentOS 7 with libvirt
+running on it.  You may then install the RDO Release RPM:
+
+``sudo yum install -y https://www.rdoproject.org/repos/rdo-release.rpm opnfv-apex-{version}.rpm``
+
+The RDO Project release repository is needed to install OpenVSwitch, which is a dependency of
+opnfv-apex. If you do not have external connectivity to use this repository you need to download
+the OpenVSwitch RPM from the RDO Project repositories and install it with the opnfv-apex RPM.
+
+Preparing your jumphost using an ISO image
+------------------------------------------
+
+An alternative to preparing your own jumphost id to use a <template> ISO image as a boot image.
+Download or build the ISO image according to the following instructions.
+
+Retrieving the ISO image
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+If you choose to install the <template> scenario from an ISO image you must first
+retrieve the <template-containing>.iso image of the Colorado release.  This can be
+found  can be found at <hyperlink required>.
+
+Building the ISO image
+^^^^^^^^^^^^^^^^^^^^^^
+
+Alternatively, you may choose to build the Fuel .iso from source by cloning the
+opnfv/fuel git repository.  To retrieve the repository for the Brahmaputra release use the following command:
+
+$ git clone https://gerrit.opnfv.org/gerrit/fuel
+
+Check-out the Brahmaputra release tag to set the HEAD to the
+baseline required to replicate the Brahmaputra release:
+
+$ git checkout colorado.1.0
+
+Go to the fuel directory and build the .iso:
+
+$ cd fuel/build; make all
+
+For more information on how to build, please see *Reference: 14*
+
+Booting from the ISO image
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Mount the <template> ISO file/media as a boot device on the jump host server.  If all your hardware
+preparation is complete at this time you should reboot the jumphost to establish the deployment server.
+
+
+Additional preparations
+-----------------------
+.. Additional information should be provided here.  it should be relatively short and informative
+.. and not drag attention away from the hardware preparation section.
+
+
+Additionally, familiarize yourself with Fuel by reading the following documents:
+
+- Fuel planning guide, please see *Reference: 8*
+
+- Fuel user guide, please see *Reference: 9*
+
+- Fuel operations guide, please see *Reference: 10*
+
+- Fuel Plugin Developers Guide, please see *Reference: 11*
+
+Prior to installation, a number of deployment specific parameters must be collected, those are:
+
+#.     Provider sub-net and gateway information
+
+#.     Provider VLAN information
+
+#.     Provider DNS addresses
+
+#.     Provider NTP addresses
+
+#.     Network overlay you plan to deploy (VLAN, VXLAN, FLAT)
+
+#.     How many nodes and what roles you want to deploy (Controllers, Storage, Computes)
+
+#.     Monitoring options you want to deploy (Ceilometer, Syslog, etc.).
+
+#.     Other options not covered in the document are available in the links above
+
+This information will be needed for the configuration procedures
+provided in this document.
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/references.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/references.rst
new file mode 100644
index 000000000..5cafbab6a
--- /dev/null
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/references.rst
@@ -0,0 +1,51 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License. .. http://creativecommons.org/licenses/by/4.0 ..
+.. (c) Christopher Price (Ericsson AB) and others
+
+
+References
+==========
+
+OPNFV
+-----
+
+1) `OPNFV Home Page <http://www.opnfv.org>`_
+
+2) `OPNFV documentation- and software downloads <https://www.opnfv.org/software/download>`_
+
+OpenStack
+---------
+
+3) `OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
+
+4) `OpenStack documentation <http://docs.openstack.org>`_
+
+OpenDaylight
+------------
+
+5) `OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
+
+Fuel
+----
+6) `The Fuel OpenStack project <https://wiki.openstack.org/wiki/Fuel>`_
+
+7) `Fuel documentation overview <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/>`_
+
+8) `Fuel planning guide <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/mos-planning-guide.html>`_
+
+9) `Fuel quick start guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/quickstart-guide.html>`_
+
+10) `Fuel operations guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/operations.html>`_
+
+11) `Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>`_
+
+12) `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list>`_
+
+Fuel in OPNFV
+-------------
+
+13) `OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/installation-instruction.html>`_
+
+14) `OPNFV Build instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/build-instruction.html>`_
+
+15) `OPNFV Release Note for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/release-notes.html>`_