diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/ti_omap5_common.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/ti_omap5_common.h | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/qemu/roms/u-boot/include/configs/ti_omap5_common.h b/qemu/roms/u-boot/include/configs/ti_omap5_common.h deleted file mode 100644 index a582fa404..000000000 --- a/qemu/roms/u-boot/include/configs/ti_omap5_common.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * (C) Copyright 2013 - * Texas Instruments Incorporated. - * Sricharan R <r.sricharan@ti.com> - * - * Derived from OMAP4 done by: - * Aneesh V <aneesh@ti.com> - * - * TI OMAP5 AND DRA7XX common configuration settings - * - * SPDX-License-Identifier: GPL-2.0+ - * - * For more details, please see the technical documents listed at - * http://www.ti.com/product/omap5432 - */ - -#ifndef __CONFIG_TI_OMAP5_COMMON_H -#define __CONFIG_TI_OMAP5_COMMON_H - -#define CONFIG_OMAP54XX -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_MISC_INIT_R -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_SYS_CACHELINE_SIZE 64 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE - -/* - * For the DDR timing information we can either dynamically determine - * the timings to use or use pre-determined timings (based on using the - * dynamic method. Default to the static timing infomation. - */ -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PALMAS_POWER -#endif - -#include <asm/arch/cpu.h> -#include <asm/arch/omap.h> - -#include <configs/ti_armv7_common.h> - -/* - * Hardware drivers - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK 48000000 - -/* Per-SoC commands */ -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS - -/* - * Environment setup - */ -#ifndef PARTS_DEFAULT -#define PARTS_DEFAULT -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - "console=" CONSOLEDEV ",115200n8\0" \ - "fdtfile=undefined\0" \ - "bootpart=0:2\0" \ - "bootdir=/boot\0" \ - "bootfile=zImage\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - "partitions=" PARTS_DEFAULT "\0" \ - "optargs=\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk1p2 rw\0" \ - "mmcrootfstype=ext4 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "vram=${vram} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ - "source ${loadaddr}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ - "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ - "env import -t ${loadaddr} ${filesize}\0" \ - "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "mmcboot=mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run loadfdt; " \ - "echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ - "bootz ${loadaddr} - ${fdtaddr}; " \ - "fi;" \ - "fi;\0" \ - "findfdt="\ - "if test $board_name = omap5_uevm; then " \ - "setenv fdtfile omap5-uevm.dtb; fi; " \ - "if test $board_name = dra7xx; then " \ - "setenv fdtfile dra7-evm.dtb; fi;" \ - "if test $fdtfile = undefined; then " \ - "echo WARNING: Could not determine device tree to use; fi; \0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \ - -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run mmcboot;" \ - "setenv mmcdev 1; " \ - "setenv bootpart 1:2; " \ - "setenv mmcroot /dev/mmcblk0p2 rw; " \ - "run mmcboot;" \ - - -/* - * SPL related defines. The Public RAM memory map the ROM defines the - * area between 0x40300000 and 0x4031E000 as a download area for OMAP5 - * (dra7xx is larger, but we do not need to be larger at this time). We - * set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and - * print some information. - */ -#define CONFIG_SPL_TEXT_BASE 0x40300000 -#define CONFIG_SPL_MAX_SIZE (0x4031E000 - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_DISPLAY_PRINT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" -#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ - (128 << 20)) - -#ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ -#endif - -#endif /* __CONFIG_TI_OMAP5_COMMON_H */ |