Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 150 deletions

diff --git a/qemu/roms/u-boot/include/configs/ti_omap5_common.h b/qemu/roms/u-boot/include/configs/ti_omap5_common.h
deleted file mode 100644
index a582fa404..000000000
--- a/qemu/roms/u-boot/include/configs/ti_omap5_common.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * (C) Copyright 2013
- * Texas Instruments Incorporated.
- * Sricharan R	  <r.sricharan@ti.com>
- *
- * Derived from OMAP4 done by:
- *	Aneesh V <aneesh@ti.com>
- *
- * TI OMAP5 AND DRA7XX common configuration settings
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * For more details, please see the technical documents listed at
- * http://www.ti.com/product/omap5432
- */
-
-#ifndef __CONFIG_TI_OMAP5_COMMON_H
-#define __CONFIG_TI_OMAP5_COMMON_H
-
-#define CONFIG_OMAP54XX
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_MISC_INIT_R
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_SYS_CACHELINE_SIZE	64
-
-/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE		GPT2_BASE
-
-/*
- * For the DDR timing information we can either dynamically determine
- * the timings to use or use pre-determined timings (based on using the
- * dynamic method.  Default to the static timing infomation.
- */
-#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_PALMAS_POWER
-#endif
-
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-#include <configs/ti_armv7_common.h>
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		48000000
-
-/* Per-SoC commands */
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-/*
- * Environment setup
- */
-#ifndef PARTS_DEFAULT
-#define PARTS_DEFAULT
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV \
-	"console=" CONSOLEDEV ",115200n8\0" \
-	"fdtfile=undefined\0" \
-	"bootpart=0:2\0" \
-	"bootdir=/boot\0" \
-	"bootfile=zImage\0" \
-	"usbtty=cdc_acm\0" \
-	"vram=16M\0" \
-	"partitions=" PARTS_DEFAULT "\0" \
-	"optargs=\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk1p2 rw\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"vram=${vram} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-		"source ${loadaddr}\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
-	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
-		"env import -t ${loadaddr} ${filesize}\0" \
-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"mmcboot=mmc dev ${mmcdev}; " \
-		"if mmc rescan; then " \
-			"echo SD/MMC found on device ${mmcdev};" \
-			"if run loadbootenv; then " \
-				"echo Loaded environment from ${bootenv};" \
-				"run importbootenv;" \
-			"fi;" \
-			"if test -n $uenvcmd; then " \
-				"echo Running uenvcmd ...;" \
-				"run uenvcmd;" \
-			"fi;" \
-			"if run loadimage; then " \
-				"run loadfdt; " \
-				"echo Booting from mmc${mmcdev} ...; " \
-				"run mmcargs; " \
-				"bootz ${loadaddr} - ${fdtaddr}; " \
-			"fi;" \
-		"fi;\0" \
-	"findfdt="\
-		"if test $board_name = omap5_uevm; then " \
-			"setenv fdtfile omap5-uevm.dtb; fi; " \
-		"if test $board_name = dra7xx; then " \
-			"setenv fdtfile dra7-evm.dtb; fi;" \
-		"if test $fdtfile = undefined; then " \
-			"echo WARNING: Could not determine device tree to use; fi; \0" \
-	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
-
-#define CONFIG_BOOTCOMMAND \
-	"run findfdt; " \
-	"run mmcboot;" \
-	"setenv mmcdev 1; " \
-	"setenv bootpart 1:2; " \
-	"setenv mmcroot /dev/mmcblk0p2 rw; " \
-	"run mmcboot;" \
-
-
-/*
- * SPL related defines.  The Public RAM memory map the ROM defines the
- * area between 0x40300000 and 0x4031E000 as a download area for OMAP5
- * (dra7xx is larger, but we do not need to be larger at this time).  We
- * set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and
- * print some information.
- */
-#define CONFIG_SPL_TEXT_BASE		0x40300000
-#define CONFIG_SPL_MAX_SIZE		(0x4031E000 - CONFIG_SPL_TEXT_BASE)
-#define CONFIG_SPL_DISPLAY_PRINT
-#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
-					 (128 << 20))
-
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
-#endif
-
-#endif /* __CONFIG_TI_OMAP5_COMMON_H */