diff options
Diffstat (limited to 'qemu/roms/u-boot/include/configs/ti816x_evm.h')
| -rw-r--r-- | qemu/roms/u-boot/include/configs/ti816x_evm.h | 179 |
1 files changed, 0 insertions, 179 deletions
diff --git a/qemu/roms/u-boot/include/configs/ti816x_evm.h b/qemu/roms/u-boot/include/configs/ti816x_evm.h deleted file mode 100644 index b8c0d54ab..000000000 --- a/qemu/roms/u-boot/include/configs/ti816x_evm.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * ti816x_evm.h - * - * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> - * Antoine Tenart, <atenart@adeneo-embedded.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_TI816X_EVM_H -#define __CONFIG_TI816X_EVM_H - -#define CONFIG_TI81XX -#define CONFIG_TI816X -#define CONFIG_SYS_NO_FLASH -#define CONFIG_OMAP -#define CONFIG_OMAP_COMMON - -#define CONFIG_ARCH_CPU_INIT - -#include <asm/arch/omap.h> - -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (32 * 1024)) -#define CONFIG_SYS_LONGHELP /* undef save memory */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT "u-boot/ti816x# " -#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM - -#define CONFIG_OF_LIBFDT -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG /* required for ramdisk support */ - -#include <config_cmd_default.h> /* u-boot default commands */ - -#define CONFIG_VERSION_VARIABLE -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_BOOTDELAY 3 /* set negative for no autoboot */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x81000000\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc rescan;" \ - "fatload mmc 0 ${loadaddr} uImage;" \ - "bootm ${loadaddr}" \ - -#define CONFIG_BOOTARGS "console=ttyO2,115200n8 noinitrd earlyprintk" - -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_CBSIZE 512 /* console I/O buffer size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size */ - -#undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ - -#define CONFIG_CMD_ASKEN -#define CONFIG_CMD_ECHO -#define CONFIG_OMAP_GPIO -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 - -#define CONFIG_FS_FAT - -/* - * Only one of the following two options (DDR3/DDR2) should be enabled - * CONFIG_TI816X_EVM_DDR2 - * CONFIG_TI816X_EVM_DDR3 - */ -#define CONFIG_TI816X_EVM_DDR3 - -/* - * Supported values: 400, 531, 675 or 796 MHz - */ -#define CONFIG_TI816X_DDR_PLL_796 - -#define CONFIG_TI816X_USE_EMIF0 1 -#define CONFIG_TI816X_USE_EMIF1 1 - - -#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */ -#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ -#define PHYS_DRAM_1_SIZE 0x40000000 /* 1 GB */ -#define PHYS_DRAM_2 0xC0000000 /* DRAM Bank #2 */ -#define PHYS_DRAM_2_SIZE 0x40000000 /* 1 GB */ - -#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - -/** - * Platform/Board specific defs - */ -#define CONFIG_SYS_CLK_FREQ 27000000 -#define CONFIG_SYS_TIMERBASE 0x4802E000 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -#undef CONFIG_NAND_OMAP_GPMC - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (48000000) -#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */ - -#define CONFIG_BAUDRATE 115200 - -/* allow overwriting serial config and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_SERIAL1 -#define CONFIG_SERIAL2 -#define CONFIG_SERIAL3 -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -#define CONFIG_ENV_IS_NOWHERE - -/* SPL */ -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x40400000 -#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR - -#define CONFIG_SPL_BSS_START_ADDR 0x80000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" - -#define CONFIG_SPL_BOARD_INIT - -#define CONFIG_SYS_TEXT_BASE 0x80800000 -#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -/* Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* Unsupported features */ -#undef CONFIG_USE_IRQ - -#endif |