Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 179 deletions

diff --git a/qemu/roms/u-boot/include/configs/ti816x_evm.h b/qemu/roms/u-boot/include/configs/ti816x_evm.h
deleted file mode 100644
index b8c0d54ab..000000000
--- a/qemu/roms/u-boot/include/configs/ti816x_evm.h
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * ti816x_evm.h
- *
- * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
- * Antoine Tenart, <atenart@adeneo-embedded.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_TI816X_EVM_H
-#define __CONFIG_TI816X_EVM_H
-
-#define CONFIG_TI81XX
-#define CONFIG_TI816X
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_OMAP
-#define CONFIG_OMAP_COMMON
-
-#define CONFIG_ARCH_CPU_INIT
-
-#include <asm/arch/omap.h>
-
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (32 * 1024))
-#define CONFIG_SYS_LONGHELP		/* undef save memory */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT		"u-boot/ti816x# "
-#define CONFIG_MACH_TYPE		MACH_TYPE_TI8168EVM
-
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG		/* required for ramdisk support */
-
-#include <config_cmd_default.h>		/* u-boot default commands */
-
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_BOOTDELAY		3 /* set negative for no autoboot */
-#define CONFIG_EXTRA_ENV_SETTINGS	\
-	"loadaddr=0x81000000\0"		\
-
-#define CONFIG_BOOTCOMMAND			\
-	"mmc rescan;"				\
-	"fatload mmc 0 ${loadaddr} uImage;"	\
-	"bootm ${loadaddr}"			\
-
-#define CONFIG_BOOTARGS	"console=ttyO2,115200n8 noinitrd earlyprintk"
-
-/* Clock Defines */
-#define V_OSCK          24000000    /* Clock output from T2 */
-#define V_SCLK          (V_OSCK >> 1)
-
-#define CONFIG_SYS_MAXARGS	32
-#define CONFIG_SYS_CBSIZE	512 /* console I/O buffer size */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+ sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* boot arg buffer size */
-
-#undef  CONFIG_SYS_CLKS_IN_HZ
-#define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
-
-#define CONFIG_CMD_ASKEN
-#define CONFIG_CMD_ECHO
-#define CONFIG_OMAP_GPIO
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_CMD_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-#define CONFIG_FS_FAT
-
-/*
- * Only one of the following two options (DDR3/DDR2) should be enabled
- * CONFIG_TI816X_EVM_DDR2
- * CONFIG_TI816X_EVM_DDR3
- */
-#define CONFIG_TI816X_EVM_DDR3
-
-/*
- * Supported values: 400, 531, 675 or 796 MHz
- */
-#define CONFIG_TI816X_DDR_PLL_796
-
-#define CONFIG_TI816X_USE_EMIF0	1
-#define CONFIG_TI816X_USE_EMIF1	1
-
-
-#define CONFIG_NR_DRAM_BANKS	2		/* we have 2 banks of DRAM */
-#define PHYS_DRAM_1		0x80000000	/* DRAM Bank #1 */
-#define PHYS_DRAM_1_SIZE        0x40000000	/* 1 GB */
-#define PHYS_DRAM_2		0xC0000000	/* DRAM Bank #2 */
-#define PHYS_DRAM_2_SIZE	0x40000000	/* 1 GB */
-
-#define CONFIG_MAX_RAM_BANK_SIZE	(2048 << 20)	/* 2048MB */
-#define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(NON_SECURE_SRAM_END - \
-		GENERATED_GBL_DATA_SIZE)
-
-/**
- * Platform/Board specific defs
- */
-#define CONFIG_SYS_CLK_FREQ     27000000
-#define CONFIG_SYS_TIMERBASE    0x4802E000
-#define CONFIG_SYS_PTV          2   /* Divisor: 2^(PTV+1) => 8 */
-
-#undef CONFIG_NAND_OMAP_GPMC
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK      (48000000)
-#define CONFIG_SYS_NS16550_COM1     0x48024000  /* Base EVM has UART2 */
-
-#define CONFIG_BAUDRATE     115200
-
-/* allow overwriting serial config and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_SERIAL1
-#define CONFIG_SERIAL2
-#define CONFIG_SERIAL3
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-#define CONFIG_ENV_IS_NOWHERE
-
-/* SPL */
-/* Defines for SPL */
-#define CONFIG_SPL
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE    0x40400000
-#define CONFIG_SPL_MAX_SIZE     ((128 - 18) * 1024)
-#define CONFIG_SPL_STACK        CONFIG_SYS_INIT_SP_ADDR
-
-#define CONFIG_SPL_BSS_START_ADDR   0x80000000
-#define CONFIG_SPL_BSS_MAX_SIZE     0x80000     /* 512 KB */
-
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
-#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME        "u-boot.img"
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_YMODEM_SUPPORT
-#define CONFIG_SYS_SPI_U_BOOT_OFFS  0x20000
-#define CONFIG_SYS_SPI_U_BOOT_SIZE  0x40000
-#define CONFIG_SPL_LDSCRIPT     "$(CPUDIR)/omap-common/u-boot-spl.lds"
-
-#define CONFIG_SPL_BOARD_INIT
-
-#define CONFIG_SYS_TEXT_BASE        0x80800000
-#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE  0x100000
-
-/* Since SPL did pll and ddr initialization for us,
- * we don't need to do it twice.
- */
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
-/* Unsupported features */
-#undef CONFIG_USE_IRQ
-
-#endif