Adding qemu as a submodule of KVMFORNFV

This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>

1 files changed, 0 insertions, 235 deletions

diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs b/qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs
deleted file mode 100644
index 92851cd58..000000000
--- a/qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs
+++ /dev/null
@@ -1,235 +0,0 @@
-\ *****************************************************************************
-\ * Copyright (c) 2004, 2008 IBM Corporation
-\ * All rights reserved.
-\ * This program and the accompanying materials
-\ * are made available under the terms of the BSD License
-\ * which accompanies this distribution, and is available at
-\ * http://www.opensource.org/licenses/bsd-license.php
-\ *
-\ * Contributors:
-\ *     IBM Corporation - initial implementation
-\ ****************************************************************************/
-
-\ define function pointer as forward declaration for get-interrupt-line
-\ this is board wireing and southbridge dependent
-\ returns the wired interrupt line for this config addr
-\ ( config-addr -- irq-line )
-DEFER pci-get-irq-line
-
-\ define function pointer as forward declaration for get-interrupt-sense-type
-\ this is board wireing and southbridge dependent
-\ returns the wired interrupt sense type for this config addr
-\ 0 - Edge rising
-\ 1 - Level low
-\ 2 - Level high
-\ 3 - Edge falling
-\ ( config-addr -- irq-sense )
-DEFER pci-get-irq-sense
-
-
-\ *****************************************************************************
-\ Generic IRQ routines
-\ *****************************************************************************
-
-
-
-: unknown-slot ( -- 0 )
-\	cr pci-vec ABORT" Unknown slot "
-	0
-;
-\ 0c s" /ht/@1/@2"    PCI-X INTA & INTC Pnpirq0 -> irq12
-\ 0e s" /ht/@1/@2"    PCI-X INTB & INTD Pnpirq1 -> irq14
-\ 10 s" /ht/@8,1"     ATA         
-\ 0f s" /ht/@1/@1"    Obsidian     Pnpirq2 -> irq15
-\ 10 s" /ht/@7/@2"    Video / Exar Serial  PirqA
-\ 11 s" /ht/@2/@4"    Ethernet     PirqB
-\ 12 s" /ht/@2/@4,1"  Ethernet     PirqC
-\ 13 s" /ht/@7/@0"    USB          PirqD
-\ 13 s" /ht/@7/@0,1"  USB          PirqD
-\ 13 s" /ht/@7/@0,2"  USB          PirqD
-
-\ 14 s" /ht/@3/@0"    PCIe gpio28
-\ 15 s" /ht/@4/@0"    PCIe gpio29
-\ 16 s" /ht/@5/@0"    PCIe gpio30
-\ 17 s" /ht/@6/@0"    PCIe gpio31
-
-
-\ -----------------------------------------------------------------------------
-\ Get the interrupt pin for a device on ht u4
-: u4-get-irq-line ( config-addr -- irq-line )
-\	cr s" u4-get-irq-line " type
-	pci-device-vec c@ CASE 
-		1 OF pci-device-vec-len 1 >= IF  
-				pci-device-vec 1+ c@ CASE 
-					1 OF f ENDOF
-					2 OF dup pci-interrupt@ CASE
-							1 OF c ENDOF
-							3 OF e ENDOF
-							2 OF c ENDOF
-							4 OF e ENDOF
-						ENDCASE
-					ENDOF 
-					dup OF unknown-slot  ENDOF
-				ENDCASE
-			ELSE
-				unknown-slot
-			THEN
-		ENDOF
-		2 OF pci-device-vec-len 1 >= IF  
-				 pci-device-vec 1+ c@ CASE
-					4 OF dup pci-addr2fn 1 >= IF 12 ELSE 11 THEN  ENDOF 
-					dup OF unknown-slot  ENDOF
-				ENDCASE
-			ELSE
-				unknown-slot
-			THEN
-		ENDOF
-		3 OF 14 ENDOF
-		4 OF 15 ENDOF
-		5 OF 16 ENDOF
-		6 OF 17 ENDOF
-		7 OF pci-device-vec-len 1 >= IF  
-				pci-device-vec 1+ c@ CASE 
-					0 OF 13  ENDOF 
-					2 OF 10  ENDOF 
-					dup OF unknown-slot  ENDOF
-				ENDCASE
-			ELSE
-				unknown-slot
-			THEN
-		ENDOF
-		8 OF 10 ENDOF
-                dup OF unknown-slot  ENDOF	
-        ENDCASE
-	swap drop
-;
-
-\ -----------------------------------------------------------------------------
-\ Get the interrupt sense type for a device on ht u4
-: u4-get-irq-sense ( config-addr -- irq-sense )
-\	cr s" u4-get-irq-sense " type
-        u4-get-irq-line CASE 
-	0c OF 00 ENDOF
-	0e OF 00 ENDOF
-	dup OF 01  ENDOF
-        ENDCASE
-;
-
-\ 10 s" /ht/@4,1"    set-pci-interrupt \ ATA
-\ 13 s" /ht/@3/@0"   set-pci-interrupt \ USB
-\ 13 s" /ht/@3/@0,1" set-pci-interrupt \ USB
-\ 13 s" /ht/@3/@0,2" set-pci-interrupt \ USB
-\ 1c s" /ht/@2/@1"   set-pci-interrupt \ Ethernet
-\ 1d s" /ht/@2/@1,1" set-pci-interrupt \ Ethernet
-
-\ -----------------------------------------------------------------------------
-\ Get the interrupt pin for a device on ht u3
-: u3-get-irq-line ( config-addr -- irq-line )
-\	cr s" u3-get-irq-line " type
-	pci-device-vec c@ CASE 
-		2 OF pci-device-vec-len 1 >= IF  
-				pci-device-vec 1+ c@ CASE 
-					1 OF dup pci-addr2fn 1 >= IF 1d ELSE 1c THEN  ENDOF 
-					dup OF unknown-slot  ENDOF
-				ENDCASE
-			ELSE
-				unknown-slot
-			THEN
-		ENDOF
-		3 OF 13 ENDOF
-		4 OF 10 ENDOF
-                dup OF unknown-slot  ENDOF	
-        ENDCASE
-	swap drop
-;
-
-\ -----------------------------------------------------------------------------
-\ Get the interrupt sense type for a device on ht u3
-: u3-get-irq-sense ( config-addr -- irq-sense )
-\	cr s" u3-get-irq-sense " type
-        u3-get-irq-line CASE 
-	dup OF 01  ENDOF
-        ENDCASE
-;
-
-
-
-\ -----------------------------------------------------------------------------
-\ Get the interrupt pin for a device on attu
-: pcie-get-irq-line ( config-addr -- irq-line )
-\	cr s" pcie-get-irq-line " type
-	drop
-	3
-;
-
-
-\ -----------------------------------------------------------------------------
-\ Get the interrupt sense type for a device on attu
-: pcie-get-irq-sense ( config-addr -- irq-sense )
-\ 	cr s" pcie-get-irq-sense " type
-       drop
-        01
-;
-
-\ -----------------------------------------------------------------------------
-\ Set up the special routines for HT irq handling
-: ht-irq-init ( -- )
-\	cr s" ht-irq-init " type
-	u4? IF
-       		['] u4-get-irq-line TO pci-get-irq-line
-       		['] u4-get-irq-sense TO pci-get-irq-sense
-	ELSE
-        	['] u3-get-irq-line TO pci-get-irq-line
-	       	['] u3-get-irq-sense TO pci-get-irq-sense
-	THEN
-;
-
-\ -----------------------------------------------------------------------------
-\ Set up the special routines for PCI-e irq handling
-: pcie-irq-init ( -- )
-\	cr s" pcie-irq-init " type
-        ['] pcie-get-irq-sense TO pci-get-irq-sense
-        ['] pcie-get-irq-line TO pci-get-irq-line
-;
-
-\ -----------------------------------------------------------------------------
-\ Set up the special routines for irq handling
-0 VALUE mpic
-: pci-irq-init ( mpic puid -- mpic )
-        over TO mpic
-        18 rshift FF and
-        CASE
-                F1 OF pcie-irq-init ENDOF
-                F2 OF ht-irq-init ENDOF
-                dup OF ABORT" Wrong PUID! in pci-irq-init" ENDOF
-        ENDCASE
-;
-
-\ -----------------------------------------------------------------------------
-\ Set the interrupt pin for a device
-: pci-set-irq-line ( config-addr -- )
-\	cr pci-vec
-        dup pci-get-irq-line 
-\	." ->" dup .
-        swap pci-irq-line!
-;
-
-\ -----------------------------------------------------------------------------
-\ Add an irq entry for the device at config-addr into the irq map
-\ each entry consists of 7 integer values
-\ Structure of an entry:
-\             +----------+---+---+------------+--------------+---------+---------------+
-\  Number#    |    0     | 1 | 2 |     3      |      4       |    5    |      6        |
-\             +----------+---+---+------------+--------------+---------+---------------+
-\  meaning    |  config  |   |   |      int#  |  phandle     | intr nr | pos edge (0)  |
-\             |   addr   |   |   | (1=a, 2=b, |  intr contr  |         | act ll   (1)  |
-\             +----------+---+---+------------+--------------+---------+---------------+
-\  value      | pci slot | 0 | 0 |    1       |        mpic  |     7   |     0|1       |
-\             +----------+---+---+------------+--------------+---------+---------------+
-: pci-gen-irq-entry ( prop-addr prop-len config-addr -- prop-addr prop-len )
-        dup >r encode-int+ 0    encode-64+      \ config addr
-        r@ pci-interrupt@       encode-int+     \ interrupt type
-        mpic                    encode-int+     \ phandle to MPIC
-        r@ pci-irq-line@        encode-int+     \ interrupt number
-        r> pci-get-irq-sense    encode-int+     \ trigger type
-;