diff options
| author |   RajithaY <rajithax.yerrumsetty@intel.com> | 2017-04-25 03:31:15 -0700 |
|---|---|---|
| committer | Rajitha Yerrumchetty <rajithax.yerrumsetty@intel.com> | 2017-05-22 06:48:08 +0000 |
| commit | bb756eebdac6fd24e8919e2c43f7d2c8c4091f59 (patch) | |
| tree | ca11e03542edf2d8f631efeca5e1626d211107e3 /qemu/roms/SLOF/board-js2x/slof | |
| parent | a14b48d18a9ed03ec191cf16b162206998a895ce (diff) | |
Adding qemu as a submodule of KVMFORNFV
This Patch includes the changes to add qemu as a submodule to
kvmfornfv repo and make use of the updated latest qemu for the
execution of all testcase
Change-Id: I1280af507a857675c7f81d30c95255635667bdd7
Signed-off-by:RajithaY<rajithax.yerrumsetty@intel.com>
Diffstat (limited to 'qemu/roms/SLOF/board-js2x/slof')
44 files changed, 0 insertions, 4503 deletions
diff --git a/qemu/roms/SLOF/board-js2x/slof/Makefile b/qemu/roms/SLOF/board-js2x/slof/Makefile deleted file mode 100644 index 4cdd5fa36..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/Makefile +++ /dev/null @@ -1,112 +0,0 @@ -# ***************************************************************************** -# * Copyright (c) 2004, 2008 IBM Corporation -# * All rights reserved. -# * This program and the accompanying materials -# * are made available under the terms of the BSD License -# * which accompanies this distribution, and is available at -# * http://www.opensource.org/licenses/bsd-license.php -# * -# * Contributors: -# * IBM Corporation - initial implementation -# ****************************************************************************/ - - -include ../Makefile.dirs - -include $(TOPBRDDIR)/config -include $(TOPCMNDIR)/make.rules - - -all: Makefile.dep OF.ffs paflof $(SLOFCMNDIR)/xvect.bin - -CPPFLAGS = -I$(LIBCMNDIR)/libbootmsg -I$(LIBCMNDIR)/libnvram \ - -I$(LIBCMNDIR)/libusb -I$(LIBCMNDIR)/libbcm -SLOF_LIBS = \ - $(LIBCMNDIR)/libbootmsg.a \ - $(LIBCMNDIR)/libelf.a \ - $(LIBCMNDIR)/libusb.a \ - $(LIBCMNDIR)/libnvram.a \ - $(LIBCMNDIR)/libbcm.a -BOARD_SLOF_IN = \ - $(LIBCMNDIR)/libbootmsg/bootmsg.in \ - $(LIBCMNDIR)/libelf/libelf.in \ - $(LIBCMNDIR)/libusb/usb.in \ - $(LIBCMNDIR)/libbases/libbases.in \ - $(LIBCMNDIR)/libnvram/libnvram.in \ - $(LIBCMNDIR)/libnativeio/nativeio.in \ - $(LIBCMNDIR)/libbcm/bcm.in -BOARD_SLOF_CODE = $(BOARD_SLOF_IN:%.in=%.code) - -include $(SLOFCMNDIR)/Makefile.inc - -FPPINCLUDES = -I. -I$(SLOFCMNDIR)/fs -I$(SLOFCMNDIR) - -USB_FFS_FILES = \ - $(SLOFCMNDIR)/fs/devices/pci-class_0c.fs \ - $(SLOFCMNDIR)/fs/usb/dev-hci.fs \ - $(SLOFCMNDIR)/fs/usb/slofdev.fs \ - $(SLOFCMNDIR)/fs/usb/dev-parent-calls.fs \ - $(SLOFCMNDIR)/fs/usb/dev-keyb.fs \ - $(SLOFCMNDIR)/fs/usb/dev-mouse.fs \ - $(SLOFCMNDIR)/fs/usb/dev-storage.fs \ - $(SLOFCMNDIR)/fs/usb/dev-hub.fs - -# Files that should go into the ROM fs (and so have to be listed in OF.ffs): -OF_FFS_FILES = \ - $(SLOFBRDDIR)/u4-mem.fs \ - $(SLOFBRDDIR)/attu.fs \ - $(SLOFBRDDIR)/cpu.fs \ - $(SLOFBRDDIR)/ioapic.fs \ - $(SLOFBRDDIR)/dma-function.fs \ - $(SLOFBRDDIR)/pci-bridge_1022_7460.fs \ - $(SLOFBRDDIR)/pci-device_1014_028c.fs \ - $(SLOFBRDDIR)/pci-device_1014_02bd.fs \ - $(SLOFBRDDIR)/pci-device_1022_7468.fs \ - $(SLOFBRDDIR)/pci-device_1022_7469.fs \ - $(SLOFBRDDIR)/pci-device_1022_7451.fs \ - $(SLOFBRDDIR)/pci-device_14e4_16a8.fs \ - $(SLOFBRDDIR)/bcm57xx.fs \ - $(SLOFBRDDIR)/pci-class_03.fs \ - $(SLOFBRDDIR)/vga-display.fs \ - $(SLOFBRDDIR)/freq.fs \ - $(SLOFBRDDIR)/pci-device_1002_515e.fs \ - $(SLOFBRDDIR)/citrine.fs \ - $(SLOFBRDDIR)/citrine-disk.fs \ - $(SLOFBRDDIR)/sio.fs \ - $(SLOFBRDDIR)/tpm.fs \ - $(SLOFBRDDIR)/ipmi-kcs.fs \ - $(SLOFCMNDIR)/fs/ide.fs \ - $(SLOFCMNDIR)/fs/fbuffer.fs \ - $(SLOFCMNDIR)/fs/graphics.fs \ - $(SLOFCMNDIR)/fs/generic-disk.fs \ - $(SLOFCMNDIR)/fs/scsi-disk.fs \ - $(SLOFCMNDIR)/fs/scsi-host-helpers.fs \ - $(SLOFCMNDIR)/fs/scsi-probe-helpers.fs \ - $(SLOFCMNDIR)/fs/scsi-support.fs \ - $(SLOFCMNDIR)/fs/pci-device.fs \ - $(SLOFCMNDIR)/fs/pci-bridge.fs \ - $(SLOFCMNDIR)/fs/pci-properties.fs \ - $(SLOFCMNDIR)/fs/pci-config-bridge.fs \ - $(SLOFCMNDIR)/fs/update_flash.fs \ - $(SLOFCMNDIR)/fs/xmodem.fs \ - $(SLOFCMNDIR)/fs/devices/pci-device_10de_0141.fs \ - $(SLOFCMNDIR)/fs/devices/pci-class_02.fs \ - $(SLOFBRDDIR)/default-font.bin - -# Uncomment the following line to enable the USB code: -OF_FFS_FILES += $(USB_FFS_FILES) - -OF_FFS_FILES := $(OF_FFS_FILES:%.fs=%.fsi) - -OF.ffs: Makefile $(SLOFCMNDIR)/Makefile.inc $(OF_FFS_FILES) - $(MAKE) create_OF_ffs - -# Rules for cleaning up: -.PHONY: clean_here clean distclean - -clean_here: - rm -f *.o OF.fsi OF.ffs - -clean: clean_here clean_slof - -distclean: clean_here distclean_slof diff --git a/qemu/roms/SLOF/board-js2x/slof/OF.fs b/qemu/roms/SLOF/board-js2x/slof/OF.fs deleted file mode 100644 index 3e3773580..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/OF.fs +++ /dev/null @@ -1,557 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ The master file. Everything else is included into here. - -hex - -' ll-cr to cr - -\ as early as possible we want to know if it is js20, js21 or bimini -\ u3 = js20; u4 = js21/bimini -\ the difference if bimini or js21 will be done later depending if -\ obsidian or citrine is found -\ f8000000 is probably the place of the u3/u4 version -f8000000 rl@ CONSTANT uni-n-version -uni-n-version 4 rshift dup 3 = CONSTANT u3? 4 = CONSTANT u4? -\ if (f4000682 >> 4) == 1... it is a bimini... -f4000682 rb@ 4 rshift 1 = CONSTANT bimini? - -\ to decide wether vga initialisation using bios emulation should be attempted, -\ we need to know wether a vga-device was found during pci-scan. -\ If it is found, this value will be set to the device's phandle -0 value vga-device-node? - -\ planar-id reads back GPIO 29 30 31 and returns it as one value -\ if planar-id >= 5 it should be GA2 else it is GA1 (JS20 only) -defer planar-id ( -- planar-id ) - -: (planar-id) ( -- planar-id) - \ default implementation of planar-id just returns 8 - \ the highest possible planar id for JS20 is 7 - 8 -; - -' (planar-id) to planar-id - -#include "header.fs" - -\ I/O accesses. -#include "io.fs" - -\ XXX: Enable first UART on JS20, scripts forget to do this. Sigh. -3 7 siocfg! 1 30 siocfg! - -#include "serial.fs" - -cr - -#include "base.fs" - -\ Little-endian accesses. Also known as `wrong-endian'. -#include <little-endian.fs> - -\ do not free-mem if address is not within the heap -\ workaround for NVIDIA card -: free-mem ( addr len -- ) - over heap-start heap-end within IF - free-mem - ELSE - 2drop - THEN -; - -: #join ( lo hi #bits -- x ) lshift or ; -: #split ( x #bits -- lo hi ) 2dup rshift dup >r swap lshift xor r> ; - -: blink ; - -: reset-dual-emit ; - -: console-clean-fifo ; - -: bootmsg-nvupdate ; - -: asm-cout 2drop drop ; - -#include "logging.fs" - -: log-string 2drop ; - -#include "bootmsg.fs" - -000 cp - -\ disable the nvram logging until we know if we are -\ running from ram/takeover/js20 or in normal mode on js21 -: (nvramlog-write-byte) drop ; -' (nvramlog-write-byte) to nvramlog-write-byte - -#include "exception.fs" - -: mm-log-warning 2drop ; - -: write-mm-log ( data length type -- status ) - 3drop 0 -; - -080 cp - -#include "rtc.fs" - -100 cp - -\ Input line editing. -#include "accept.fs" - -120 cp - -#include "dump.fs" - -cistack ciregs >r1 ! \ kernel wants a stack :-) - -#include "romfs.fs" - -140 cp -#include "flash.fs" - -\ 1 temp; 0 perm; let's default to temp -1 VALUE flashside? - -\ claim the memory used by copy of the flash -flash-header IF - romfs-base dup flash-image-size 0 claim drop -THEN - -s" bootinfo" romfs-lookup drop c + l@ CONSTANT start-addr -start-addr flash-addr <> CONSTANT takeover? - -takeover? u3? or 0= IF - \ we want nvram logging to work - ['] .nvramlog-write-byte to nvramlog-write-byte -THEN - -160 cp - -u4? IF f8002100 rl@ 0= ELSE false THEN ?INCLUDE u4-mem.fs -u3? IF - planar-id 5 >= IF - 40000 to nvram-size - ELSE - \ change nvram-size to 8000 for GA1 blades - 8000 to nvram-size - THEN -THEN - - -takeover? IF - \ potentially coming from phype - u4? IF - \ takeover on JS21 is using some nvram area - \ which might be available - \ on JS20 the nvram is too small and - \ we just overwrite the nvram - sec-nvram-base to nvram-base - THEN - sec-nvram-size to nvram-size - \ in takeover mode the nvram is probably not mapped - \ to the exact location where the nvram starts - \ doing a small check to see if we have a partition - \ starting with 70; this test is far from perfect but - \ takeover is not the most common mode of running slof - nvram-base rb@ 70 <> IF 0 nvram-base rb! THEN -THEN - -200 cp - -#include <slof-logo.fs> -#include <banner.fs> - -: .banner .slof-logo .banner ; - -\ Get the secondary CPUs into our own spinloop. -f8000050 rl@ CONSTANT master-cpu -\ cr .( The master cpu is #) master-cpu . - -VARIABLE cpu-mask -: get-slave ( n -- online? ) - 0 3ff8 ! 18 lshift 30000000 or 48003f02 over l! icbi 10000 0 DO LOOP 3ff8 @ ; -: mark-online ( n -- ) 1 swap lshift cpu-mask @ or cpu-mask ! ; -: get-slaves 40 0 DO i get-slave IF i mark-online THEN LOOP ; -: cpu-report ( -- ) - cpu-mask @ 40 0 DO dup 1 and IF ." #" i . THEN 1 rshift LOOP drop -; - -220 cp -master-cpu mark-online get-slaves - -DEFER disable-watchdog ( -- ) -DEFER find-boot-sector ( -- ) - - -240 cp -\ Timebase frequency, in Hz. -\ -1 VALUE tb-frequency -d# 14318378 VALUE tb-frequency \ default value - needed for "ms" to work --1 VALUE cpu-frequency - -#include "helper.fs" -260 cp - -#include <timebase.fs> - -270 cp - -#include <fcode/evaluator.fs> - -280 cp - -\ rtas-config is not used -0 CONSTANT rtas-config - -#include "rtas.fs" -290 cp -s" update_flash.fs" included -2a0 cp -cpu-mask @ rtas-fetch-cpus drop - -: of-start-cpu rtas-start-cpu ; - -' power-off to halt -' rtas-system-reboot to reboot - -: other-firmware rtas-get-flashside 0= IF 1 ELSE 0 THEN rtas-set-flashside reboot ; -: disable-boot-watchdog rtas-stop-bootwatchdog drop ; -' disable-boot-watchdog to disable-watchdog - -true value bmc? -false value debug-boot? - -\ for JS21/Bimini try to detect BMC... if kcs (io @ca8) status is not ff... -u4? IF ca8 4 + io-c@ ff = IF false to bmc? true to debug-boot? THEN THEN - -VARIABLE memnode - -\ Hook to help loading our secondary boot loader. -DEFER disk-read ( lba cnt addr -- ) -0 VALUE disk-off - -create vpd-cb 24 allot -create vpd-bootlist 4 allot -2c0 cp -#include "ipmi-vpd.fs" -2e0 cp -#include <quiesce.fs> -300 cp -#include <usb/usb-static.fs> -320 cp -#include <scsi-loader.fs> -#include <root.fs> -360 cp -#include "tree.fs" - -: .system-information ( -- ) - s" " type cr - s" SYSTEM INFORMATION" type cr - s" Processor = " type s" cpu" get-chosen IF - drop l@ >r pvr@ s" pvr>name" r> $call-method type - s" @ " type cpu-frequency d# 1000000 / - decimal . hex s" MHz" type - THEN cr s" I/O Bridge = " type u3? IF - s" U3" ELSE s" U4" THEN type - f8000000 rl@ 4 rshift s" (" type 1 0.r s" ." type - f8000000 rl@ f and 1 0.r s" )" type cr - s" SMP Size = " type cpu-mask @ cnt-bits 1 0.r - s" (" type cpu-report 8 emit s" )" type - cr s" Boot-Date = " type .date cr - s" Memory = " type s" memory" get-chosen IF - drop l@ s" mem-report" rot $call-method THEN - cr s" Board Type = " type u3? IF - s" JS20(GA" type planar-id 5 >= IF - s" 2)" ELSE s" 1)" THEN type - ELSE bimini? IF s" Bimini" ELSE s" JS21" THEN type THEN - s" (" type .vpd-machine-type [char] / emit - .vpd-machine-serial [char] / emit - .vpd-hw-revision 8 emit s" )" type cr - s" MFG Date = " type .vpd-manufacturer-date cr - s" Part No. = " type .vpd-part-number cr - s" FRU No. = " type .vpd-fru-number cr - s" FRU Serial = " type .vpd-cardprefix-serial .vpd-card-serial cr - s" UUID = " type .vpd-uuid cr - s" Flashside = " type rtas-get-flashside 0= IF - ." 0 (permanent)" - ELSE - ." 1 (temporary)" THEN cr - s" Version = " type - takeover? IF - romfs-base 38 + a type - ELSE - slof-build-id here swap rmove - here slof-build-id nip type cr - s" Build Date = " type bdate2human type - THEN - cr cr -; - -800 cp - -#include "nvram.fs" -takeover? not u4? and IF - \ if were are not in takeover mode the nvram should look - \ something like this: - \ type size name - \ ======================== - \ 51 20000 ibm,CPU0log - \ 51 5000 ibm,CPU1log - \ 70 1000 common - \ 7f da000 <free-space> - \ the partition with the type 51 should have been added - \ by LLFW... if it does not exist then something went - \ wrong and we just destroy the whole thing - 51 get-nvram-partition IF 0 0 nvram-c! ELSE 2drop THEN -THEN - -880 cp - -\ dmesg/dmesg2 not available if running in takeover/ram mode or on js20 -: dmesg ( -- ) u3? takeover? or 0= IF dmesg THEN ; -: dmesg2 ( -- ) u3? takeover? or 0= IF dmesg2 THEN ; - -#include "envvar.fs" -check-for-nvramrc - -8a0 cp -\ The client interface. -#include "client.fs" -\ ELF binary file format. -#include "elf.fs" -#include <loaders.fs> - -8a8 cp - -\ check wether a VGA device was found during pci scan, if it was -\ try to initialize it and create the needed device-nodes -0 value biosemu-vmem -100000 value biosemu-vmem-size -0 value screen-info - -: init-vga-devices ( -- ) - vga-device-node? 0= use-biosemu? 0= OR IF - EXIT - THEN - s" VGA Device found: " type vga-device-node? node>path type s" initializing..." type cr - \ claim virtual memory for biosemu of 1MB - biosemu-vmem-size 4 claim to biosemu-vmem - \ claim memory for screen-info struct (140 bytes) - d# 140 4 claim to screen-info - \ remember current-node (it might be node 0 so we cannot use get-node) - current-node @ - \ change into vga device node - vga-device-node? set-node - \ run biosemu to initialize the vga card - \ s" Time before biosemu:" type .date cr - vga-device-node? node>path ( pathstr len ) - s" biosemu " biosemu-vmem $cathex ( pathstr len paramstr len ) - 20 char-cat \ add a space ( pathstr len paramstr len ) - biosemu-vmem-size $cathex \ add VMEM Size ( pathstr len paramstr len ) - 20 char-cat \ add a space ( pathstr len paramstr len ) - 2swap $cat ( paramstr+path len ) - biosemu-debug 0<> IF - 20 char-cat biosemu-debug $cathex \ add biosemu-debug as param - ( paramstr+path+biosemu-debug len ) - THEN - .(client-exec) IF - ." biosemu client exec failed!" cr - set-node \ restore old current-node - EXIT - THEN - \ s" Time after biosemu:" type .date cr - s" VGA initialization: detecting displays..." type cr - \ try to get info for two monitors - 2 0 DO - \ setup screen-info struct as input to get_vbe_info - s" DDC" 0 char-cat screen-info swap move \ null-terminated "DDC" as signature - d# 140 screen-info 4 + w! \ reserved size in bytes (see claim above) - i screen-info 6 + c! \ monitor number - \ 320 screen-info 7 + w! \ max. screen width (800) - 500 screen-info 7 + w! \ max. screen width (1280) - \ following line would be the right thing to do, however environment seems not setup yet... - \ screen-#columns char-width * 500 min 280 max screen-info 7 + w! \ max. screen width, calculated from environment variable screen-#columns, but max. 1280, min. 640... - 8 screen-info 9 + c! \ requested color depth (8bpp) - \ d# 16 screen-info 9 + c! \ requested color depth (16bpp) - \ execute get_vbe_info from load-base - \ s" Time before client exec:" type .date cr - \ since node>path overwrites strings created with s" - \ we need to call it before assembling the parameter string - vga-device-node? node>path ( pathstr len ) - s" get_vbe_info " biosemu-vmem $cathex ( pathstr len paramstr len ) - 20 char-cat \ add a space ( pathstr len paramstr len ) - biosemu-vmem-size $cathex \ add VMEM Size ( pathstr len paramstr len ) - 20 char-cat \ add a space ( pathstr len paramstr len ) - 2swap $cat ( paramstr+path len ) - 20 char-cat - screen-info $cathex - .(client-exec) 0= - \ s" Time after client exec:" type .date cr - screen-info c@ 0<> AND IF - s" display " type i . s" found..." type - \ screen found - \ create device entry - get-node node>name \ get current nodes name (e.g. "vga") ( str len ) - i \ put display-num on the stack ( str len displaynum ) - new-device \ create new device - s" vga-display.fs" included - finish-device - s" created." type cr - THEN - LOOP - \ return to where we were before changing to vga device node - set-node - \ release the claimed memory - screen-info d# 140 release - biosemu-vmem biosemu-vmem-size release - - s" VGA initialization done." type cr -; - -init-vga-devices - -: enable-framebuffer-output ( -- ) -\ enable output on framebuffer - s" screen" find-alias ?dup IF - \ we need to open/close the screen device once - \ before "ticking" display-emit to emit - open-dev close-node - s" display-emit" $find IF - to emit - ELSE - 2drop - THEN - THEN -; - -enable-framebuffer-output - -8b0 cp - -\ do not let the usb scan overwrite the atapi cdrom alias -\ pci-cdrom-num TO cdrom-alias-num -usb-scan - -: create-aliases ( -- ) - s" net" s" net1" find-alias ?dup IF set-alias ELSE 2drop THEN - s" disk" s" disk0" find-alias ?dup IF set-alias ELSE 2drop THEN - s" cdrom" s" cdrom0" find-alias ?dup IF set-alias ELSE 2drop THEN -; - -create-aliases - -8ff cp - -.system-information - -: directserial -u3? IF - s" /ht/isa/serial@3f8" io -ELSE - s" direct-serial?" evaluate IF s" /ht/isa/serial@2f8" io ELSE s" /ht/isa/serial@3f8" io THEN -THEN -; - -directserial - -\ on bimini we want to automatically enable screen and keyboard, if they are detected... -bimini? IF - key? IF - cr ." input available on current console input device, not switching input / output." cr - ELSE - \ this enables the framebuffer as primary output device - s" screen" find-alias IF drop - s" screen" output - \ at this point serial output is theoretically disabled - ." screen detected and set as default output device" cr - THEN - \ enable USB keyboard - s" keyboard" find-alias IF drop - s" keyboard" input - \ at this point serial input is disabled - ." keyboard detected and set as default input device" cr cr cr - s" Press 's' to enter Open Firmware." type cr - 500 ms - THEN - THEN -THEN - -: .flashside - cr ." The currently active flashside is: " - rtas-get-flashside 0= IF ." 0 (permanent)" ELSE - ." 1 (temporary)" THEN -; - -bmc? IF disable-watchdog THEN - -: flashsave ( "{filename}" -- rc ) - (parse-line) dup 0> IF - s" netsave " \ command - get-flash-base $cathex \ Flash base addr - s" 400000 " $cat \ Flash size (4MB) - 2swap $cat \ add parameters from (parse-line) - evaluate - ELSE - cr - ." Usage: flashsave [bootp|dhcp,]filename[,siaddr][,ciaddr][,giaddr][,bootp-retries][,tftp-retries][,use_ci]" - cr 2drop - THEN -; - -#include <vpd-bootlist.fs> - -\ for the blades we read the bootlist from the VPD -bimini? takeover? or 0= IF ['] vpd-boot-import to read-bootlist THEN - -\ for the bimini, we try to boot from disk, if it exists, -\ only if "boot-device" is not set in the nvram -: bimini-bootlist - \ check nvram - s" boot-device" evaluate swap drop ( boot-device-strlen ) - 0= IF - \ no boot-device set in NVRAM, check if disk is available and set it... - \ clear boot-device list - 0 0 set-boot-device - s" disk" find-alias ?dup IF - \ alias found, use it as default - add-boot-device - THEN - THEN -; - -bimini? IF ['] bimini-bootlist to read-bootlist THEN - -#include <start-up.fs> - -#include <boot.fs> - -cr .( Welcome to Open Firmware) -cr -#include "copyright-oss.fs" -cr - -\ this CATCH is to ensure the code bellow always executes: boot may ABORT! -' start-it CATCH drop - -#include <history.fs> -nvram-history? [IF] -." loading shell history .. " -history-load -." done" cr -[THEN] - diff --git a/qemu/roms/SLOF/board-js2x/slof/attu.fs b/qemu/roms/SLOF/board-js2x/slof/attu.fs deleted file mode 100644 index cc1225296..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/attu.fs +++ /dev/null @@ -1,101 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ U4 "Attu" PCIe root complex. - -\ See the PCI OF binding document. - -new-device - -s" pciex" device-name s" pci" device-type -s" U4-pcie" compatible -s" U4" encode-string s" model" property - -\ spare out 0xc0000000-0xefffffff for pcie -f8070200 rl@ fffffff0 and f8070200 rl! -\ enable io memory for pcie @ c0000000-efffffff -70000003 f80903f0 rl!-le - -3 encode-int s" #address-cells" property -2 encode-int s" #size-cells" property - -s" /mpic" find-node encode-int s" interrupt-parent" property -\ XXX should have interrupt map, etc. this works for now though. - -: decode-unit 2 hex-decode-unit 3 #join 8 lshift 0 0 rot F00000 + ; -: encode-unit nip nip ff00 and 8 rshift 3 #split - over IF 2 ELSE nip 1 THEN hex-encode-unit ; - -f1000000 CONSTANT my-puid -\ Configuration space accesses. -: >config f1000000 + ; -: config-l! >config rl!-le ; -: config-l@ >config rl@-le ; -: config-w! >config rw!-le ; -: config-w@ >config rw@-le ; -: config-b! >config rb! ; -: config-b@ >config rb@ ; - -: config-dump ( addr size -- ) ['] config-l@ 4 (dump) ; - -\ 16MB of configuration space -f1000000 encode-64 1000000 encode-64+ s" reg" property - -\ 4MB of I/O space. -01000000 encode-int 00000000 encode-int+ 00000000 encode-int+ -00000000 encode-int+ f0000000 encode-int+ -00000000 encode-int+ 00400000 encode-int+ - -\ 1.75GB of memory space @ c0000000. -02000000 encode-int+ c0000000 encode-64+ -c0000000 encode-64+ 30000000 encode-64+ s" ranges" property - -\ Host bridge, so full bus range. -f0 encode-int ff encode-int+ s" bus-range" property - -: open true ; -: close ; - -\ : probe-pci-host-bridge ( bus-max bus-min mmio-max mmio-base mem-max mem-base io-max io-base my-puid -- ) -s" /mpic" find-node my-puid pci-irq-init drop - -00fff1f0 18 config-l! - -ff F0 f0000000 e8000000 e8000000 c0000000 100000000 f000 -my-puid probe-pci-host-bridge - -\ \ PCIe debug / fixup -: find-pcie-cap ( devfn -- offset | 0 ) - >r 34 BEGIN r@ + config-b@ dup ff <> over and WHILE - dup r@ + config-b@ 10 = IF - r> drop EXIT - THEN 1+ - REPEAT r> 2drop 0 -; - - : (set-ps) ( ps addr -- ) - 8 + >r 5 lshift r@ config-w@ ff1f and or r> config-w! ; - : set-ps ( ps -- ) - log2 7 - - 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF - + 2dup (set-ps) THEN drop LOOP drop ; - - : (set-rr) ( rr addr -- ) - 8 + >r c lshift r@ config-w@ 8fff and or r> config-w! ; - : set-rr ( rr -- ) - log2 7 - - 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF - + 2dup (set-rr) THEN drop LOOP drop ; - -80 set-ps 80 set-rr - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/bcm57xx.fs b/qemu/roms/SLOF/board-js2x/slof/bcm57xx.fs deleted file mode 100644 index c8e6f5aa9..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/bcm57xx.fs +++ /dev/null @@ -1,75 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2013 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ Handle bcm57xx device - -s" network" device-type - -my-space pci-alias-net - -VARIABLE obp-tftp-package - -0 VALUE bcm57xx-priv -0 VALUE open-count - -: open ( -- okay? ) - open-count 0= IF - open IF - bcm57xx-open dup not IF ." bcm57xx-open failed" EXIT THEN - drop dup TO bcm57xx-priv - 6 encode-bytes s" local-mac-address" property - true - ELSE - false - THEN - ELSE - true - THEN - my-args s" obp-tftp" $open-package obp-tftp-package ! - open-count 1 + to open-count -; - - -: close ( -- ) - open-count 0> IF - open-count 1 - dup to open-count - 0= IF - bcm57xx-priv bcm57xx-close - close - THEN - THEN - s" close" obp-tftp-package @ $call-method -; - -: read ( buf len -- actual ) - dup IF - bcm57xx-read - ELSE - nip - THEN -; - -: write ( buf len -- actual ) - dup IF - bcm57xx-write - ELSE - nip - THEN -; - -: load ( addr -- len ) - s" load" obp-tftp-package @ $call-method -; - -: ping ( -- ) - s" ping" obp-tftp-package @ $call-method -; diff --git a/qemu/roms/SLOF/board-js2x/slof/citrine-disk.fs b/qemu/roms/SLOF/board-js2x/slof/citrine-disk.fs deleted file mode 100644 index 146e7ece3..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/citrine-disk.fs +++ /dev/null @@ -1,79 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -( max-#blocks rsrc id -- ) - -new-device - -lwsplit swap wbsplit rot set-unit - -s" disk" device-name s" block" device-type - -CONSTANT resource-id -CONSTANT max-#blocks -get-parent CONSTANT ppack - - -: our-disk-read ( lba count addr -- ) - >r >r >r resource-id r> r> r> s" do-read" ppack $call-static ; - -0 pci-alias-disk - -\ Requiered interface for deblocker - -200 CONSTANT block-size -40000 CONSTANT max-transfer - -: read-blocks ( addr block# #blocks -- #read ) -\ my-unit s" dev-read-blocks" $call-parent - \ check if the read is within max-#blocks - 2dup + max-#blocks 1 + > IF - \ 2drop drop 0 \ return 0 - \ returning 0 would be correct (maybe?) but it confuses the deblocker... - \ so i erase whatever would have been read and return the "expected" #read - dup >r - swap drop \ drop block# (not needed) - block-size * erase \ erase at addr #blocks * block-size - r> \ return #read - ELSE - dup >r rot our-disk-read r> - THEN -; - -INSTANCE VARIABLE deblocker - -: open ( -- okay? ) - 0 0 s" deblocker" $open-package dup deblocker ! dup IF - s" disk-label" find-package IF - my-args rot interpose - THEN - THEN 0<> ; - -: close ( -- ) - deblocker @ close-package ; - -: seek ( pos.lo pos.hi -- status ) - 2dup lxjoin max-#blocks 1 + block-size * > IF - \ illegal seek, return -1 - 2drop -1 - ELSE - s" seek" deblocker @ $call-method - THEN -; - -: read ( addr len -- actual ) - s" read" deblocker @ $call-method ; - - -finish-device - diff --git a/qemu/roms/SLOF/board-js2x/slof/citrine-flash.fs b/qemu/roms/SLOF/board-js2x/slof/citrine-flash.fs deleted file mode 100644 index 5842b07c9..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/citrine-flash.fs +++ /dev/null @@ -1,36 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ we do all flash accesses as 8-bit - -9f000000 CONSTANT citrine-flash-addr - -: >citrine-flash citrine-flash-addr + ; -: citrine-flash@ >citrine-flash rb@ ; -: citrine-flash! >citrine-flash rb! ; -: wait-for-citrine-flash-ready BEGIN 0 citrine-flash@ 80 and UNTIL ; -: erase-citrine-flash-block ( offset -- ) - cr dup 8 .r ." Erasing..." - 20 over citrine-flash! d0 swap citrine-flash! wait-for-citrine-flash-ready ; -: write-citrine-flash ( data offset -- ) - over ff = IF 2drop EXIT THEN - 40 over citrine-flash! citrine-flash! wait-for-citrine-flash-ready ; -: write-citrine-flash-block ( addr offset -- ) \ always writes 128kB! - ." Writing..." - 20000 0 DO over i + c@ over i + write-citrine-flash LOOP 2drop - ." Done." ; -: citrine-flash ( addr offset size -- ) - BEGIN dup 0 > WHILE >r dup erase-citrine-flash-block - 2dup write-citrine-flash-block >r 20000 + r> 20000 + r> 20000 - REPEAT - drop 2drop -1 0 citrine-flash! ; - diff --git a/qemu/roms/SLOF/board-js2x/slof/citrine.fs b/qemu/roms/SLOF/board-js2x/slof/citrine.fs deleted file mode 100644 index ad6777699..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/citrine.fs +++ /dev/null @@ -1,245 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ Citrine storage controller. -2dup type - -device-name s" ide" device-type - - -3 encode-int s" #address-cells" property -0 encode-int s" #size-cells" property - -: decode-unit 3 hex-decode-unit ; -: encode-unit 3 hex-encode-unit ; - - -: >ioa [ 10 config-l@ -10 and ] LITERAL + ; -: ioa@ >ioa rl@-le ; -: ioa! >ioa rl!-le ; - - -\ Clear request completion doorbell. -2 228 ioa! - -\ status -CREATE ioasa 200 allot ioasa 200 erase \ can reduce to 8 later - -\ request/response queue -CREATE rrq 100 allot rrq 100 erase \ can be smaller - -\ data descriptor -CREATE ioadl 8 allot - -\ control block -CREATE ioarcb 80 allot ioarcb 80 erase -ioarcb dup l! -60708090 ioarcb c + l! \ user handle -ioadl ioarcb 2c + l! \ read ioadl -ioasa ioarcb 34 + l! 200 ioarcb 38 + w! - -\ ioa config data (max. 16 devices) -CREATE ioacfg 404 allot ioacfg 404 erase -CREATE setsupbuff 2c allot - setsupbuff 2c erase - 2c setsupbuff w! - 1 setsupbuff 3 + c! - -: wait-ready ( -- ) - 82800000 214 ioa! - 80000000 BEGIN dup 224 ioa@ cr .s dup 8000000 and IF - cr ." Unit check on SAS-Controller detected" - cr 42c ioa@ . - 8 110 ioa! - BEGIN cr 0 config-l@ dup . ffffffff <> UNTIL -\ ABORT" Unit check on SAS-Controller detected" - THEN - and - UNTIL drop -; - -\ wait-ready - -: wait-ioa ( int-mask -- ) BEGIN dup 224 ioa@ and UNTIL drop ; -: init-ioa ( -- ) 82800000 214 ioa! 80000000 wait-ioa ; -: do-request ( -- ) ioasa 20 erase ioarcb 404 ioa! - 2 wait-ioa 2 228 ioa! -; - -: setup-ioarcb ( rsrc type addr len -- ) - tuck 49000000 or ioadl l! ioadl 4 + l! \ setup ioadl - ioarcb 20 + l! ioadl ioarcb 2c + l! 8 ioarcb 30 + l! \ set len, ioadl addr - ioarcb 3e + c! ioarcb 8 + l! \ set type and resource - ioarcb 40 + 40 erase ; - -: setup-wrioarcb ( rsrc type addr len -- ) - tuck 49000000 or ioadl l! ioadl 4 + l! \ setup ioadl - ioarcb 1C + l! ioadl ioarcb 24 + l! 8 ioarcb 28 + l! \ set len, ioadl addr - ioarcb 3e + c! ioarcb 8 + l! \ set type and resource - ioarcb 40 + 40 erase ; - -: setup-idrrq ( rrq len -- ) - c4 ioarcb 42 + c! 8 lshift ioarcb 48 + l! ioarcb 44 + l! ; -: do-idrrq ( -- ) -1 1 0 0 setup-ioarcb rrq 100 setup-idrrq do-request ; - -: setup-query ( len -- ) c5 ioarcb 42 + c! 8 lshift ioarcb 48 + l! ; -: do-query ( -- ) -1 1 ioacfg 404 setup-ioarcb 404 setup-query do-request ; - -: setup-startUnit ( -- ) 1b ioarcb 42 + c! 3 ioarcb 46 + c! ; -: do-startUnit ( hndl -- ) 0 0 0 setup-ioarcb setup-startUnit do-request ; - -: setup-setsupported ( len -- ) 80 ioarcb 40 + c! fb ioarcb 42 + c! 8 lshift ioarcb 48 + l! ; -: do-setsupported ( -- ) -1 1 setsupbuff 2c setup-wrioarcb 2c setup-setsupported do-request ; - -\ ******************************** -\ read capacity -\ ******************************** -CREATE cap 8 allot - -: setup-cap ( -- ) 25 ioarcb 42 + c! cap 8 erase ; -: do-cap ( rsrc addr -- ) - >r 0 r> 8 setup-ioarcb setup-cap do-request ; - -: .id ( id -- ) ." @" lwsplit 2 0.r ." ," wbsplit 2 0.r ." ," 2 0.r ; - -: .cap ( rsrc -- ) - cap do-cap cap l@ cap 4 + l@ * d# 50000000 + d# 100000000 / - base @ >r decimal d# 10 /mod 4 .r ." ." 0 .r ." GB" r> base ! ; - -\ ******************************** -\ Test Unit Ready -\ ******************************** -: setup-test-unit-ready ( -- ) - 00 ioarcb 42 + c! \ SCSI cmd: Test-Unit-Ready -; - -: do-test-unit-ready ( rsrc -- ) - 0 0 0 setup-ioarcb ( rsrc type addr len -- ) - setup-test-unit-ready - do-request -; - -\ ******************************** -\ Check devices -\ ******************************** -: check-device ( ioacfg-entry -- ) - dup 2 + w@ 2001 and 0<> \ generic or raid disk - IF \ is an IOA resource ? - dup 8 + l@ ( ioacfg-entry rsrc ) \ get resource handle - 8 0 - DO ( ioacfg-entry rsrc ) - dup do-test-unit-ready ( ioacfg-entry rsrc ) - ioasa l@ 0= \ read returned status - IF - LEAVE - THEN - LOOP - drop ( ioacfg-entry ) - THEN - drop ( ) -; - -: check-devices ( -- ) - ioacfg 4 + ( ioacfg-entry ) \ config block for 16 devices - ioacfg c@ 0 \ amount of detected devices - ?DO - dup - check-device ( ioacfg-entry ) - 40 + - LOOP - drop -; - -\ ******************************** -\ Show Devices -\ ******************************** -: show-device ( ioacfg-entry -- ) - cr ." " dup 2 + w@ - dup 8000 and IF ." Controller :" THEN - dup 2000 and IF ." Disk (RAID Member):" THEN - dup 0002 and IF ." Disk (Volume Set) :" THEN - 0001 and IF ." Disk (Generic) :" THEN - space dup 4 + l@ ffffff and dup ffffff <> IF - .id - ELSE drop 9 spaces THEN space - dup 1c + 8 type space dup 24 + 10 type - dup 2 + w@ 8000 and 0= IF - space dup 8 + l@ .cap - THEN drop -; - -: show-devices ( -- ) - ioacfg 4 + ioacfg c@ 0 - ?DO dup show-device 40 + LOOP drop -; - -: setup-read ( lba len -- ) \ len is in blocks - 28 ioarcb 42 + c! - swap ioarcb 44 + l! - 8 lshift ioarcb 48 + l! -; - -: do-read ( hndl lba len addr -- ) \ len is in blocks - over >r rot >r swap 0 -rot 200 * ( 0 hndl addr len* ) - setup-ioarcb r> r> ( lba len ) - setup-read do-request -; - -: make-subnode ( rsrc-type rsrc-handle id -- ) - rot 2 and IF \ only device which are part of a RAID should be started - over do-startUnit \ at least on citrine there are problems starting - \ Generic SCSI devices - THEN do-setsupported - dup ffffff <> IF - \ we need max-#blocks for citrine-disk.fs - ( rsrc id ) - over cap do-cap cap l@ ( rsrc id max-#blocks ) - swap rot swap ( max-#block rsrc id ) \ this is what citrine-disk.fs expects... - s" citrine-disk.fs" included - ELSE - 2drop - THEN -; - -: make-subnodes ( -- ) - ioacfg 4 + ioacfg c@ 0 ?DO dup 2 + w@ dup ( ioacfg rsrc-type rsrc-type ) - A000 \ 8000 = Resource Subtype is IOA Focal Point. - \ 2000 = Device is a member of a data redundancy group (eg. RAID). - \ (1000 = Device is designated for use as a hot spare. - \ Unfortunately obsidian reports disk which are not part of - \ of a RAID also as hot space even if they are not.) - \ all these devices should not appeat in DT - \ SIS40 page 60 - and 0= IF - swap dup ( rsrc-type ioacfg ioacfg ) - 8 + l@ over 4 + l@ ( rsrc-type ioacfg rsrc-handle rsrc-addr ) - ffffff and 2swap swap 2swap ( ioacfg rsrc-type rsrc-handle rsrc-addr ) - make-subnode ELSE drop THEN 40 + LOOP drop ; - -: do-it ( -- ) - init-ioa do-idrrq - do-query - check-devices - show-devices -; - -: setup-shutdown ( -- ) - f7 ioarcb 42 + c! 0 ioarcb 48 + l! 0 ioarcb 44 + l! ; -: do-shutdown ( -- ) -1 1 0 0 setup-ioarcb setup-shutdown do-request ; - -: open true ; -: close ; - -: start ['] do-it CATCH IF cr ." Citrine disabled" ELSE make-subnodes THEN ; - -cr start cr cr diff --git a/qemu/roms/SLOF/board-js2x/slof/copyright-oss.fs b/qemu/roms/SLOF/board-js2x/slof/copyright-oss.fs deleted file mode 100644 index 06f9a3ada..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/copyright-oss.fs +++ /dev/null @@ -1,16 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -cr .( Copyright (c) char ) emit .( 2004, 2008 IBM Corporation All rights reserved.) -cr .( This program and the accompanying materials are made available) -cr .( under the terms of the BSD License available at) -cr .( http://www.opensource.org/licenses/bsd-license.php) diff --git a/qemu/roms/SLOF/board-js2x/slof/cpu.fs b/qemu/roms/SLOF/board-js2x/slof/cpu.fs deleted file mode 100644 index bee07d108..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/cpu.fs +++ /dev/null @@ -1,44 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ CPU node. Pretty minimal... - -( cpu# -- ) -new-device set-space - -: pvr>name s" PowerPC," rot 10 rshift CASE - 39 OF s" 970" ENDOF - 3c OF s" 970FX" ENDOF - 44 OF 1 my-space 1 xor lshift cpu-mask @ and IF - s" 970MP" ELSE s" 970GX" THEN ENDOF - \ On GX CPUs, the sibling is missing, numbering is the same. - dup dup OF 0 <# # # # # [char] # hold #> ENDOF ENDCASE $cat ; - -pvr@ pvr>name device-name -s" cpu" device-type - -my-space encode-int s" reg" property - -tb-frequency encode-int s" timebase-frequency" property -cpu-frequency encode-int s" clock-frequency" property - - 8000 encode-int s" d-cache-size" property - 80 encode-int s" d-cache-line-size" property -10000 encode-int s" i-cache-size" property - 80 encode-int s" i-cache-line-size" property - -: open true ; -: close ; - - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/dart.fs b/qemu/roms/SLOF/board-js2x/slof/dart.fs deleted file mode 100644 index 8fdac83f9..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/dart.fs +++ /dev/null @@ -1,31 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ CPC9x5 DART. - -new-device - -s" dart" 2dup device-name device-type -u3? IF s" u3-dart" compatible THEN -u4? IF s" u4-dart" compatible THEN - -0 encode-int f8033000 encode-int+ -0 encode-int+ 7000 encode-int+ s" reg" property - -: open true ; -: close ; - -\ Now clear and disable the DART. -20000000 f8033000 rl! - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/dma-function.fs b/qemu/roms/SLOF/board-js2x/slof/dma-function.fs deleted file mode 100644 index 2e314cdaa..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/dma-function.fs +++ /dev/null @@ -1,31 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2011 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -: dma-alloc ( ... size -- virt ) - \ ." dma-alloc called: " .s cr - alloc-mem -; - -: dma-free ( virt size -- ) - \ ." dma-free called: " .s cr - free-mem -; - -: dma-map-in ( ... virt size cacheable? -- devaddr ) - \ ." dma-map-in called: " .s cr - 2drop -; - -: dma-map-out ( virt devaddr size -- ) - \ ." dma-map-out called: " .s cr - 2drop drop -; diff --git a/qemu/roms/SLOF/board-js2x/slof/flash.fs b/qemu/roms/SLOF/board-js2x/slof/flash.fs deleted file mode 100644 index 110f5c86b..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/flash.fs +++ /dev/null @@ -1,43 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ we do all flash accesses as 8-bit - -ff000000 CONSTANT flash-addr - -: >flash flash-addr + ; -: flash@ >flash rb@ ; -: flash! >flash rb! ; -: wait-for-flash-ready BEGIN 0 flash@ 80 and UNTIL ; -: erase-flash-block ( offset -- ) - cr dup 8 .r ." Erasing..." - 20 over flash! d0 swap flash! wait-for-flash-ready ; -: write-flash ( data offset -- ) - 40 over flash! flash! wait-for-flash-ready ; -: write-flash-buffer ( addr offset -- ) - e8 over flash! wait-for-flash-ready 1f over flash! - 20 0 DO over i + c@ over i + flash! LOOP - d0 over flash! wait-for-flash-ready 2drop ; -: write-flash-block ( addr offset -- ) \ always writes 128kB! - ." Writing..." - 20000 0 DO over i + over i + write-flash-buffer 20 +LOOP 2drop - ." Done." ; -: flash ( addr offset size -- ) - BEGIN dup 0 > WHILE >r dup erase-flash-block 2dup write-flash-block - >r 20000 + r> 20000 + r> 20000 - REPEAT drop 2drop -1 0 flash! ; - -: flash-it get-load-base 0 e0000 flash ; -: flash4 get-load-base 0 400000 flash ; - -\ for update-flash -: flash-image-size ( addr -- size ) 30 + rx@ ; diff --git a/qemu/roms/SLOF/board-js2x/slof/freq.fs b/qemu/roms/SLOF/board-js2x/slof/freq.fs deleted file mode 100644 index 9f1d36d78..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/freq.fs +++ /dev/null @@ -1,39 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ Use the HPET to calculate various frequencies. - -\ Make HPET run. -1 10 hpet! - -\ Set PMC1 to count CPU cycles. -f00 mmcr0! - -d# 1000000000000000 4 hpet@ / CONSTANT hpet-freq - -: get-times tbl@ pmc1@ f0 hpet@ ; - -\ Calculate the CPU and TB frequencies. -: calibrate get-times dup >r swap >r swap >r hpet-freq d# 100 / + >r - BEGIN get-times dup r@ < WHILE 3drop REPEAT r> drop - rot r> - ffffffff and \ TB - rot r> - ffffffff and \ CPU - rot r> - >r \ HPET - hpet-freq * r@ / swap - hpet-freq * r> / ; - -: round-to tuck 2/ + over / * ; -calibrate TO tb-frequency d# 100000000 round-to TO cpu-frequency - -\ Stop HPET. -0 10 hpet! diff --git a/qemu/roms/SLOF/board-js2x/slof/header.fs b/qemu/roms/SLOF/board-js2x/slof/header.fs deleted file mode 100644 index be2b7221c..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/header.fs +++ /dev/null @@ -1,19 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -get-flash-base VALUE flash-addr - -get-nvram-base CONSTANT nvram-base -get-nvram-size CONSTANT nvram-size -ff8f9000 CONSTANT sec-nvram-base \ save area from phype.... not really known -2000 CONSTANT sec-nvram-size diff --git a/qemu/roms/SLOF/board-js2x/slof/helper.fs b/qemu/roms/SLOF/board-js2x/slof/helper.fs deleted file mode 100644 index 1e2b03063..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/helper.fs +++ /dev/null @@ -1,39 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -: slof-build-id ( -- str len ) - flash-header 10 + a -; - -: slof-revision s" 001" ; - -: read-version-and-date - flash-header 0= IF - s" " encode-string - ELSE - flash-header 10 + 10 - here swap rmove - here 10 - s" , " $cat - bdate2human $cat encode-string THEN -; - -: invert-region ( addr len -- ) - 2dup or 7 and CASE - 0 OF 3 rshift 0 ?DO dup dup rx@ -1 xor swap rx! xa1+ LOOP ENDOF - 4 OF 2 rshift 0 ?DO dup dup rl@ -1 xor swap rl! la1+ LOOP ENDOF - 3 and - 2 OF 1 rshift 0 ?DO dup dup rw@ -1 xor swap rw! wa1+ LOOP ENDOF - dup OF 0 ?DO dup dup rb@ -1 xor swap rb! 1+ LOOP ENDOF - ENDCASE - drop -; diff --git a/qemu/roms/SLOF/board-js2x/slof/ht.fs b/qemu/roms/SLOF/board-js2x/slof/ht.fs deleted file mode 100644 index 8f818a825..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/ht.fs +++ /dev/null @@ -1,189 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ Hypertransport. - -\ See the PCI OF binding document. - -new-device - -s" ht" 2dup device-name device-type -s" u3-ht" compatible -s" U3" encode-string s" model" property - -3 encode-int s" #address-cells" property -2 encode-int s" #size-cells" property - -s" /mpic" find-node encode-int s" interrupt-parent" property - -4000 encode-int 0 encode-int+ 0 encode-int+ -1 encode-int+ s" /mpic" find-node encode-int+ -10 encode-int+ 0 encode-int+ -s" interrupt-map" property - -f800 encode-int 0 encode-int+ 0 encode-int+ -7 encode-int+ s" interrupt-map-mask" property - -: decode-unit 2 hex-decode-unit 3 lshift or - 8 lshift 0 0 rot ; -: encode-unit nip nip ff00 and 8 rshift dup 7 and swap 3 rshift - over IF 2 ELSE nip 1 THEN hex-encode-unit ; - -f2000000 CONSTANT my-puid -\ Configuration space accesses. -: >config dup ffff > IF 1000000 + THEN f2000000 + ; - -\ : config-l! >config cr ." config-l! " 2dup . space . rl!-le ; -\ : config-l@ >config cr ." config-l@ " dup . rl@-le space dup . ; -\ : config-w! >config cr ." config-w! " 2dup . space . rw!-le ; -\ : config-w@ >config cr ." config-w@ " dup . rw@-le space dup . ; -\ : config-b! >config cr ." config-b! " 2dup . space . rb! ; -\ : config-b@ >config cr ." config-b@ " dup . rb@ space dup . ; - -: config-l! >config rl!-le ; -: config-l@ >config rl@-le ; -: config-w! >config rw!-le ; -: config-w@ >config rw@-le ; -: config-b! >config rb! ; -: config-b@ >config rb@ ; - -: config-dump ( addr size -- ) ['] config-l@ 4 (dump) ; - - -\ 16MB of configuration space, separate for type 0 and type 1. -00000000 encode-int f2000000 encode-int+ -00000000 encode-int+ 02000000 encode-int+ s" reg" property - -\ 4MB of I/O space. -01000000 encode-int 00000000 encode-int+ 00000000 encode-int+ -00000000 encode-int+ f4000000 encode-int+ -00000000 encode-int+ 00400000 encode-int+ - -\ 1 GB of memory space @ 80000000 -02000000 encode-int+ 00000000 encode-int+ 80000000 encode-int+ -00000000 encode-int+ 80000000 encode-int+ -00000000 encode-int+ 40000000 encode-int+ s" ranges" property - -\ Host bridge, so full bus range. -0 encode-int ff encode-int+ s" bus-range" property - -: enable-ht-apic-space 3c0300fe f8070200 rl! ; -enable-ht-apic-space - -\ spare out 0xc0000000-0xefffffff for pcie -f8070200 rl@ fffffff0 and f8070200 rl! -\ enable io memory for pcie @ c0000000-efffffff -70000003 f80903f0 rl!-le - - -\ Workaround for "takeover" boot on JS20: the top 8131 is programmed to be -\ device #1f, while it should be #01. -u3? IF f800 config-l@ 74501022 = IF 41 f8c2 config-w! THEN THEN - -\ Assign BUIDs. - -: find-ht-primary - 34 BEGIN config-b@ dup 0= ABORT" No HT capability block found!" - dup config-l@ e00000ff and 8 = IF 2 + EXIT THEN 1 + AGAIN ; - -: assign-buid ( this -- next ) - find-ht-primary dup >r config-w@ 5 rshift 1f and over r> config-b! + ; - -: assign-buids ( -- ) - 1 BEGIN 0 config-l@ ffffffff <> WHILE assign-buid REPEAT drop ; - -assign-buids - -: ldtstop f8000840 rl@ 40000 or f8000840 rl! ; -: delay 100000 0 DO LOOP ; -: wait-for-done BEGIN f8070110 rl@ 30 and UNTIL - BEGIN 8b4 config-l@ 30 and UNTIL ; -: ldtstop1 f8000840 rl@ dup 20000 or f8000840 rl! delay - f8000840 rl! wait-for-done ; -: warm 400000 f8070300 rl! 0 f8070300 rl! ; - -: dumpht cr f8070110 rl@ 8 0.r space 8b4 config-l@ 8 0.r - space f8070122 rb@ 2 0.r space 8bd config-b@ 2 0.r ; - -: clearht f8070110 dup rl@ swap rl! - f8070120 dup rl@ swap rl! - 08b4 dup config-l@ swap config-l! - 08bc dup config-l@ swap config-l! ; - -: setwidth dup f8070110 rb! 8b7 config-b! ; -: set8 00 setwidth ; -: set16 11 setwidth ; - -: setfreq dup f8070122 rb! 8bd config-b! ; -: set200 0 setfreq ; -: set300 1 setfreq ; -: set400 2 setfreq ; -: set500 3 setfreq ; -: set600 4 setfreq ; -: set800 5 setfreq ; -: set1000 6 setfreq ; -: set1200 7 setfreq ; -: set1400 8 setfreq ; -: set1600 9 setfreq ; - -: ht>freq 2 + dup 6 > IF 2* 6 - THEN d# 100 * ; -\ XXX: looks only at the U3/U4 side for max. link speed and width. -clearht f8070111 rb@ setwidth -f8070120 rw@ 2log dup .( Switching top HT bus to ) ht>freq 0 d# .r .( MHz...) cr -setfreq u3? IF ldtstop THEN u4? IF ldtstop1 THEN - -: open true ; -: close ; - -\ : probe-pci-host-bridge ( bus-max bus-min mmio-max mmio-base mem-max mem-base io-max io-base my-puid -- ) -s" /mpic" find-node my-puid pci-irq-init drop -1f 0 c0000000 b8000000 b8000000 80000000 100000000 10000 -my-puid probe-pci-host-bridge - -: msi - f80040f0 010854 config-l! 0 010858 config-l! - ffff 01085c config-w! 81 010852 config-b! -; - -\ This works. Needs cleaning up though; and we need to communicate the -\ MSI address range to the client program. (We keep the default range -\ at fee00000 for now). -: msi-on 7 1 DO 10000 i 800 * a0 + config-l! LOOP ; -msi-on - -\ PCIe debug / fixup -: find-pcie-cap ( devfn -- offset | 0 ) - >r 34 BEGIN r@ + config-b@ dup ff <> over and WHILE - dup r@ + config-b@ 10 = IF - r> drop EXIT - THEN 1+ - REPEAT r> 2drop 0 -; - -: (set-ps) ( ps addr -- ) - 8 + >r 5 lshift r@ config-w@ ff1f and or r> config-w! ; -: set-ps ( ps -- ) - log2 7 - - 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF - + 2dup (set-ps) THEN drop LOOP drop ; - -: (set-rr) ( rr addr -- ) - 8 + >r c lshift r@ config-w@ 8fff and or r> config-w! ; -: set-rr ( rr -- ) - log2 7 - - 10000 0 DO i 8 lshift dup find-pcie-cap ?dup IF - + 2dup (set-rr) THEN drop LOOP drop ; - -100 set-ps 200 set-rr -100 set-ps 200 set-rr - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/i2c.fs b/qemu/roms/SLOF/board-js2x/slof/i2c.fs deleted file mode 100644 index 044bde92d..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/i2c.fs +++ /dev/null @@ -1,77 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -new-device - -s" i2c" 2dup device-name device-type -s" u4-i2c" compatible - -0 encode-int f8001000 encode-int+ -0 encode-int+ 1000 encode-int+ s" reg" property - -: >i2c f8001000 + ; -: i2c@ >i2c rl@ ; -: i2c! >i2c rl! ; - -: .i2c 80 0 DO i i2c@ . 10 +LOOP ; - -\ 0 mode 1 ctrl 2 stat 3 isr 4 ier 5 addr 6 suba 7 data -\ 8 rev 9 risetime a bittime - -\ 0 mode: 08 -\ 1 ctrl: 8 = start 4 = stop 2 = xaddr 1 = aak -\ 2 stat: 2 = lastaak 1 = busy -\ 3 isr: 8 = istart 4 = istop 2 = iaddr 1 = idata -\ 4 ier: -- -\ 5 addr: a1..a7 -\ 6 suba: offset -\ 7 data: data - -: i2c-addr ( addr -- ) 50 i2c! 2 10 i2c! BEGIN 30 i2c@ 2 and UNTIL ; -: i2c-subaddr ( suba -- ) 60 i2c! ; -: i2c-stop ( -- ) BEGIN 30 i2c@ dup 30 i2c! 4 and UNTIL ; -: i2c-nak? ( -- failed? ) 20 i2c@ 2 and 0= dup IF i2c-stop THEN ; -: i2c-short? ( -- failed? ) 30 i2c@ 4 and 0<> dup IF 0 10 i2c! i2c-stop THEN ; -: i2c-aak-if-more ( n -- ) 1 <> 1 and 10 i2c! ; - -: (read) ( buf len addr -- error? ) - 1 or i2c-addr i2c-nak? IF 2drop true EXIT THEN - dup i2c-aak-if-more 2 30 i2c! - BEGIN - 30 i2c@ 1 and IF - 1- >r 70 i2c@ over c! char+ r> - dup 0= IF i2c-stop 2drop false EXIT THEN - dup i2c-aak-if-more 1 30 i2c! THEN - i2c-short? IF 2drop true EXIT THEN - AGAIN ; - -: i2c-read ( buf len addr -- error? ) - 4 0 i2c! (read) ; -: i2c-sub-read ( buf len addr suba -- error? ) - c 0 i2c! i2c-subaddr (read) ; - -: i2c-write ( buf len addr -- error? ) - 4 0 i2c! i2c-addr i2c-nak? IF 2drop true EXIT THEN - over c@ 70 i2c! 2 30 i2c! - BEGIN - 30 i2c@ 1 and IF - 1- >r char+ r> i2c-nak? IF 2drop true EXIT THEN - dup 0= IF 4 10 i2c! i2c-stop nip EXIT THEN - over c@ 70 i2c! 1 30 i2c! THEN - i2c-short? IF 2drop true EXIT THEN - AGAIN ; - -: open true ; -: close ; - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/io.fs b/qemu/roms/SLOF/board-js2x/slof/io.fs deleted file mode 100644 index f3889840c..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/io.fs +++ /dev/null @@ -1,26 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ I/O accesses. - -\ Legacy I/O accesses. -: >io f4000000 + ; - -: io-c! >io rb! ; -: io-c@ >io rb@ ; - -: io-w! >io rw! ; -: io-w@ >io rw@ ; - -\ Accessing the SIO config registers. -: siocfg! 2e io-c! 2f io-c! ; -: siocfg@ 2e io-c! 2f io-c@ ; diff --git a/qemu/roms/SLOF/board-js2x/slof/ioapic.fs b/qemu/roms/SLOF/board-js2x/slof/ioapic.fs deleted file mode 100644 index 685d6dfed..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/ioapic.fs +++ /dev/null @@ -1,36 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ ( ioapic-addr -- ) -\ IO-APIC setup. - -CONSTANT ioapic - -: ioapic@ ( offset -- x ) ioapic rb! ioapic 10 + rl@-le ; -: ioapic! ( x offset -- ) ioapic rb! ioapic 10 + rl!-le ; - -: init-ioapic ( irq# -- ) - 1a000 or 1 ioapic@ 10 rshift 1+ 0 ?DO - 0 i 2* 11 + ioapic! dup - \ move all ISA IRQs to 40 and higher, - \ as to not conflict with U3/U4 internal - \ IRQs. ISA IRQs are positive edge. - dup ff and 0c < IF a000 - 40 + THEN - i 2* 10 + ioapic! 1+ LOOP drop -; - -: dump-ioapic ( -- ) - 1 ioapic@ 10 rshift 1+ - dup cr . ." irqs" 0 ?DO - cr i 2 0.r space i 2* 11 + ioapic@ 8 0.r - i 2* 10 + ioapic@ 8 0.r LOOP -; diff --git a/qemu/roms/SLOF/board-js2x/slof/ipmi-kcs.fs b/qemu/roms/SLOF/board-js2x/slof/ipmi-kcs.fs deleted file mode 100644 index cf9d5af5a..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/ipmi-kcs.fs +++ /dev/null @@ -1,57 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ IPMI KCS interface to the BMC. - -new-device - ca8 1 set-unit - - : open true ; - : close ; - - create descr-buf 100 allot - - : rtas-get-bmc-version ( -- adr len ) - descr-buf 100 rtas-get-blade-descr ( len status ) - IF - drop 0 0 - ELSE - descr-buf 9 + swap 11 - ( adr len ) - THEN - ; - - ' rtas-get-bmc-version to bmc-version - - s" system-controller" 2dup device-name device-type - \ s" IBM,BMC." get-build-name $cat encode-string s" model" property - \ s" IBM,BMC.12345" encode-string s" model" property - s" IBM,BMC." bmc-version $cat encode-string s" model" property - 0 0 s" ranges" property - - new-device - - : open true ; - : close ; - - s" ipmi" 2dup device-name device-type - s" ipmi-kcs" compatible - - 1 encode-int ca8 encode-int+ 1 encode-int+ s" reg" property - 4 encode-int s" reg-spacing" property - s" IBM,BMC." bmc-version $cat encode-string s" model" property - - s" ipmi" get-node node>path set-alias - - finish-device - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/ipmi-vpd.fs b/qemu/roms/SLOF/board-js2x/slof/ipmi-vpd.fs deleted file mode 100644 index bfb3e5014..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/ipmi-vpd.fs +++ /dev/null @@ -1,98 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -: vpd-read-bootlist ( -- ) - 837 4 vpd-bootlist rtas-read-vpd IF vpd-bootlist 4 erase THEN -; - -: vpd-write-bootlist ( offset len data -- ) - 837 4 vpd-bootlist rtas-write-vpd -; - -: .vpd-machine-type - e 7 vpd-cb rtas-read-vpd drop - 0 vpd-cb 7 + c! - vpd-cb zcount type -; - -: .vpd-machine-serial - 15 7 vpd-cb rtas-read-vpd drop - 0 vpd-cb 7 + c! - vpd-cb zcount type -; - -: .vpd-card-serial - 54 6 vpd-cb rtas-read-vpd drop - 0 vpd-cb 6 + c! - vpd-cb zcount type -; -: .vpd-cardprefix-serial - 5a 6 vpd-cb rtas-read-vpd drop - 0 vpd-cb 6 + c! - vpd-cb zcount type -; - -: .vpd-hw-revision - 65 1 vpd-cb rtas-read-vpd drop - vpd-cb c@ . -; - -: .vpd-part-number - 3c c vpd-cb rtas-read-vpd drop - vpd-cb c type -; - -: .vpd-fru-number - 48 c vpd-cb rtas-read-vpd drop - vpd-cb c type -; - -: .vpd-manufacturer-date - 6b 4 vpd-cb rtas-read-vpd drop - 0 vpd-cb 4 + c! - vpd-cb zcount type -; - -: .vpd-uuid - 9f 10 vpd-cb rtas-read-vpd drop - 10 0 do i vpd-cb + c@ 2 0.r loop -; - -: vpd-read-model ( -- addr len ) - 60 4 vpd-cb rtas-read-vpd drop vpd-cb 4 -leading s" ," $cat - e 7 vpd-cb rtas-read-vpd drop vpd-cb 4 $cat s" -" $cat vpd-cb 4 + 3 $cat -; - -: .vpd - ." ===================== VPD =====================" - cr ." Machine Type : " .vpd-machine-type - cr ." Machine Serial No. : " .vpd-machine-serial - cr ." Hardware Revision : " .vpd-hw-revision - cr ." Manuf. Date : " .vpd-manufacturer-date - cr ." Part Number : " .vpd-part-number - cr ." FRU Number : " .vpd-fru-number - cr ." FRU Serial No. : " .vpd-cardprefix-serial .vpd-card-serial - cr ." UUID : " .vpd-uuid -; - -: vpd-write-revision-and-build-id ( -- ) - 406 24 vpd-cb rtas-read-vpd drop 0 - vpd-cb 1a + zcount bdate2human drop a string=ci 0= - IF bdate2human drop a vpd-cb 1a + zplace drop 1 THEN - vpd-cb zcount slof-revision string=ci 0= - IF slof-revision vpd-cb zplace drop 1 THEN - vpd-cb 4 + zcount slof-build-id string=ci 0= - IF slof-build-id vpd-cb 4 + rzplace drop 1 THEN - 1 = IF 406 24 vpd-cb rtas-write-vpd drop THEN -; - -vpd-write-revision-and-build-id diff --git a/qemu/roms/SLOF/board-js2x/slof/memory.fs b/qemu/roms/SLOF/board-js2x/slof/memory.fs deleted file mode 100644 index b1b7aaa91..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/memory.fs +++ /dev/null @@ -1,52 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ The /memory node. - -\ See 3.7.6. -new-device - -s" memory" 2dup device-name device-type - -: mem-size-u3 20000000 ; -: (mem-size-u4) ( # -- size ) - 4 lshift f8002200 + rl@ dup 1 and 0= IF drop 0 EXIT THEN - dup c000 and e rshift over 3000 and c rshift + 10000000 swap lshift - swap 2 and 0= IF 2* THEN ; -: mem-size-u4 0 4 0 DO i (mem-size-u4) + LOOP ; -: mem-size u3? IF mem-size-u3 THEN u4? IF mem-size-u4 THEN ; -: mem-speed-u4 f8000800 rl@ 12 rshift 7 and 4 + d# 200 * 3 / ; -: mem-speed-u3 f8000f60 rl@ c rshift f and d# 100 * 3 / ; -: mem-speed u3? IF mem-speed-u3 THEN u4? IF mem-speed-u4 THEN ; - - -: encode-our-reg - 0 encode-int 0 encode-int+ - mem-size dup >r 80000000 > IF - 0 encode-int+ 80000000 encode-int+ - 1 encode-int+ 0 encode-int+ r> 80000000 - >r THEN - r@ 20 rshift encode-int+ r> ffffffff and encode-int+ ; -encode-our-reg s" reg" property -0 mem-size release \ Make our memory available - - -: mem-report - base @ decimal mem-size 1e rshift 0 .r - mem-size 3fffffff and IF ." .5" THEN ." GB of RAM @ " - mem-speed . ." MHz" base ! ; - -get-node memnode ! - -: open true ; -: close ; - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/mpic.fs b/qemu/roms/SLOF/board-js2x/slof/mpic.fs deleted file mode 100644 index a9523445d..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/mpic.fs +++ /dev/null @@ -1,31 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -new-device - -s" mpic" device-name s" interrupt-controller" device-type -s" open-pic" compatible -0 0 s" interrupt-controller" property - -2 encode-int s" #interrupt-cells" property - -0 encode-int f8040000 encode-int+ -0 encode-int+ 30000 encode-int+ s" reg" property - -: enable-mpic 6 f80000e0 rl! ; -enable-mpic - -: open true ; -: close ; - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-aliases.fs b/qemu/roms/SLOF/board-js2x/slof/pci-aliases.fs deleted file mode 100644 index f017e4a55..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-aliases.fs +++ /dev/null @@ -1,85 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ Starting alias number for net devices after the onboard devices. -2 VALUE pci-net-num -\ Starting alias number for disks after the onboard devices. -0 VALUE pci-disk-num -\ Starting alias number for cdroms after the onboard devices. -0 VALUE pci-cdrom-num - -\ define a new alias for this device -: pci-set-alias ( str-addr str-len num -- ) - $cathex strdup \ create alias name - get-node node>path \ get path string - set-alias \ and set the alias -; - -\ define a new net alias -: unknown-enet ( -- pci-net-num ) - pci-net-num dup 1+ TO pci-net-num -; -: pci-alias-net ( config-addr -- ) - u3? IF - pci-device-vec c@ CASE - 2 OF pci-device-vec-len 1 >= IF - pci-device-vec 1+ c@ CASE - 1 OF dup pci-addr2fn 1 >= IF 1 ELSE 0 THEN ENDOF - dup OF unknown-enet ENDOF - ENDCASE - ELSE - unknown-enet - THEN - ENDOF - dup OF unknown-enet ENDOF - ENDCASE - ELSE - pci-device-vec c@ CASE - 2 OF pci-device-vec-len 1 >= IF - pci-device-vec 1+ c@ CASE - 4 OF dup pci-addr2fn 1 >= IF 1 ELSE 0 THEN ENDOF - dup OF unknown-enet ENDOF - ENDCASE - ELSE - unknown-enet - THEN - ENDOF - dup OF unknown-enet ENDOF - ENDCASE - THEN - swap drop \ forget the config address - - s" net" rot pci-set-alias \ create the alias -; - -\ define a new disk alias -: pci-alias-disk ( config-addr -- ) - drop \ forget the config address - pci-disk-num dup 1+ TO pci-disk-num \ increase the pci-disk-num - s" disk" rot pci-set-alias \ create the alias -; -\ define a new cdrom alias -: pci-alias-cdrom ( config-addr -- ) - drop \ forget the config address - pci-cdrom-num dup 1+ TO pci-cdrom-num \ increase the pci-cdrom-num - s" cdrom" rot pci-set-alias \ create the alias -; - -\ define the alias for the calling device -: pci-alias ( config-addr -- ) - dup pci-class@ - 10 rshift CASE - 01 OF pci-alias-disk ENDOF - 02 OF pci-alias-net ENDOF - dup OF drop ENDOF - ENDCASE -; diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-bridge_1022_7460.fs b/qemu/roms/SLOF/board-js2x/slof/pci-bridge_1022_7460.fs deleted file mode 100644 index 87b583088..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-bridge_1022_7460.fs +++ /dev/null @@ -1,203 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ AMD 8111 I/O hub. - -\ See the documentation at http://www.amd.com ; the datasheet for this chip is -\ document #24674. - -\ Config space access functions - we're touching multiple device numbers and -\ device functions below, so we've got to add our own my-space base here: -: config-b@ dup 1000 < IF my-space + THEN config-b@ ; -: config-w@ dup 1000 < IF my-space + THEN config-w@ ; -: config-l@ dup 1000 < IF my-space + THEN config-l@ ; -: config-b! dup 1000 < IF my-space + THEN config-b! ; -: config-w! dup 1000 < IF my-space + THEN config-w! ; -: config-l! dup 1000 < IF my-space + THEN config-l! ; - -\ First, some master config. Not all of this logically belongs to just -\ one function, and certainly not to the LPC bridge; also, we'll -\ initialize all functions in "downstream" order, and this code has to be -\ run first. So do it now. - -00 842 config-b! \ Disable 8237 & 8254 & 8259's. We're not a PC. -u3? IF - 80 847 config-b! \ Disable EHCI, as it is terminally broken. -THEN -03 848 config-b! \ Enable LPC, IDE; disable I2C, SMM, AC'97 functions. -01 849 config-b! \ Enable USB, disable 100Mb enet. -01 84b config-b! \ Enable IO-APIC. - -fec00000 s" ioapic.fs" included -00 init-ioapic - -\ Program PNPIRQ[0,1,2] as IRQ #D,E,F; switch those GPIOs to low-active. - 0b 848 config-b! \ enable devB:3 -7000 b58 config-l! \ map PMxx at pci i/o 7000 - d1 b41 config-b! \ enable access to PMxx space - -\ on JS20 the planar id is encoded in GPIO 29, 30 and 31 -\ >=5 is GA2 else it is GA1 -: (planar-id) ( -- planar-id) - [ 70dd io-c@ 5 rshift 1 and ] LITERAL - [ 70de io-c@ 5 rshift 2 and ] LITERAL - [ 70df io-c@ 5 rshift 4 and ] LITERAL - + + 7 xor -; - -u3? IF ['] (planar-id) to planar-id THEN - -8 70d3 io-c! 8 70d4 io-c! 8 70d5 io-c! \ set the pins to low-active - bimini? IF 5 70c4 io-c! THEN \ on bimini set gpio4 as output and high to power up USB - fec b44 config-w! \ set PNPIRQ pnpirq2 -> f , pnpirq1 -> e pnpirq0 -> c - 51 b41 config-b! \ disable access to PMxx space - 03 848 config-b! \ disable devB:3 - -\ The function of the PCI controller BARs change depending on the mode the -\ controller is in. -\ And the default is legacy mode. Gross. -05 909 config-b! \ Enable native PCI mode. -03 940 config-b! \ Enable both ports. - -\ Enable HPET on 8111, at address fe000000. -fe000001 8a0 config-l! - -: >hpet fe000000 + ; -: hpet@ >hpet rl@-le ; -: hpet! >hpet rl!-le ; - -INCLUDE freq.fs - -\ Disable HPET. -0 8a0 config-l! - -\ 8111 has only 16 bits of PCI I/O space. Get the address in range. -8000 next-pci-io ! - -\ before disabling EHCI it needs to be reset - -\ first we are setting up the BAR0, so that we can talk to the -\ memory mapped controller; not using the PCI scan because we just -\ want a temporary setup - -: really-disable-broken-amd8111-ehci ( -- ) - \ this word only works on U4 systems (JS21/Bimini) - \ yeah, hardcoded! - f2000000 to puid - - \ the PCI scan would assign pci-next-mmio to that device - \ let's just take that address - pci-next-mmio @ 100000 #aligned - \ pci-bus-number 10 lshift 210 or could be something like 70210 - \ 7: pci-bus-number - \ 2: device function - \ 10: offset 10 (bar 0) - pci-bus-number 10 lshift 210 or rtas-config-l! - - \ enable memory space - pci-bus-number 10 lshift 204 or dup rtas-config-l@ 2 or swap rtas-config-l! - - pci-next-mmio @ 100000 #aligned ( base ) - - \ Sequence prescribed for resetting the EHCI contoller - - \ If Run/Stop bit (ECAP30 bit 0) is 1 - \ Set Run/Stop bit to 0 - \ wait 2ms - - dup 30 + rl@ 1 and 1 = IF - dup 30 + rl@ 1 or - over 30 + rl! - 2 ms - THEN - - \ While HCHalted bit (ECAP34 bit 12) is 0 (still running, wait forever) - \ wait 2ms - - BEGIN dup 34 + rl@ 1000 and 0= 2 ms UNTIL - - \ Set HCReset bit (ECAP30 bit 1) - - dup 30 + 2 swap rl! - - \ While HCReset bit is 1 (wait forever for reset to complete) - \ wait 2ms - - BEGIN dup 30 + rl@ 2 and 0= 2 ms UNTIL drop - - \ now it is really disabled - - \ disable memory space access again - 2100000 pci-bus-number 10 lshift 204 or rtas-config-l! - - 80 847 config-b! \ Disable EHCI, as it is terminally broken. -; - -my-space pci-class-name type cr - -\ copied from pci-properties.fs and pci-scan.fs -\ changed to disable the EHCI completely just before the scan -\ and after mem/IO transactions have been enabled - -\ Setup the Base and Limits in the Bridge -\ and scan the bus(es) beyond that Bridge -: pci-bridge-probe-amd8111 ( addr -- ) - dup pci-bridge-set-bases \ SetUp all Base Registers - dup pci-bridge-range-props \ Setup temporary "range - pci-bus-number 1+ TO pci-bus-number \ increase number of busses found - pci-device-vec-len 1+ TO pci-device-vec-len \ increase the device-slot vector depth - dup \ stack config-addr for pci-bus! - FF swap \ Subordinate Bus Number ( for now to max to open all subbusses ) - pci-bus-number swap \ Secondary Bus Number ( the new busnumber ) - dup pci-addr2bus swap \ Primary Bus Number ( the current bus ) - pci-bus! \ and set them into the bridge - pci-enable \ enable mem/IO transactions - - \ at this point we can talk to the broken EHCI controller - really-disable-broken-amd8111-ehci - - dup pci-bus-scnd@ func-pci-probe-bus \ and probe the secondary bus - dup pci-bus-number swap pci-bus-subo! \ set SubOrdinate Bus Number to current number of busses - pci-device-vec-len 1- TO pci-device-vec-len \ decrease the device-slot vector depth - dup pci-bridge-set-limits \ SetUp all Limit Registers - drop \ forget the config-addr -; - -\ used to set up all unknown Bridges. -\ If a Bridge has no special handling for setup -\ the device file (pci-bridge_VENDOR_DEVICE.fs) can call -\ this word to setup busses and scan beyond. -: pci-bridge-generic-setup-amd8111 ( addr -- ) - pci-device-slots >r \ save the slot array on return stack - dup pci-common-props \ set the common properties before scanning the bus - s" pci" device-type \ the type is allways "pci" - dup pci-bridge-probe-amd8111 \ find all device connected to it - dup assign-all-bridge-bars \ set up all memory access BARs - dup pci-set-irq-line \ set the interrupt pin - dup pci-set-capabilities \ set up the capabilities - pci-bridge-props \ and generate all properties - r> TO pci-device-slots \ and reset the slot array -; - -: amd8111-bridge-setup - my-space - u3? takeover? or IF - \ if it is js20 or we are coming from takeover - \ we just do the normal setup - pci-bridge-generic-setup - ELSE - pci-bridge-generic-setup-amd8111 - THEN - s" pci" device-name -; - -amd8111-bridge-setup diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-capabilities.fs b/qemu/roms/SLOF/board-js2x/slof/pci-capabilities.fs deleted file mode 100644 index a50714a6b..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-capabilities.fs +++ /dev/null @@ -1,23 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ ----------------------------------------------------------------------------- -\ Set the msi address for a device -: pci-set-msi ( cap-addr -- ) - drop -; - -\ Set up all known capabilities for this board to the plugged devices -: pci-set-capabilities ( config-addr -- ) - dup 05 pci-cap-find ?dup IF pci-set-msi THEN - drop -; diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-class_03.fs b/qemu/roms/SLOF/board-js2x/slof/pci-class_03.fs deleted file mode 100644 index 05c8eb62d..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-class_03.fs +++ /dev/null @@ -1,55 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -my-space pci-class-name type - -my-space pci-device-generic-setup - -my-space pci-class-name device-type - -\ add legacy I/O Ports / Memory regions to assigned-addresses -\ see PCI Bus Binding Revision 2.1 Section 7. -s" reg" get-my-property -IF - \ "reg" does not exist, create new - encode-start -ELSE - \ "reg" does exist, copy it - encode-bytes -THEN -\ I/O Range 0x3B0-0x3BB -my-space a1000000 or encode-int+ \ non-relocatable, aliased I/O space -3b0 encode-64+ \ addr -c encode-64+ \ size -\ I/O Range 0x3C0-0x3DF -my-space a1000000 or encode-int+ \ non-relocatable, aliased I/O space -3c0 encode-64+ \ addr -20 encode-64+ \ size -\ the U4 does not support memory accesses to this region... so we dont put it into "reg" -\ maybe with some clever hacking of the address map registers it will be possible to access -\ these regions?? -\ Memory Range 0xA0000-0xBFFFF -\ my-space a2000000 or encode-int+ \ non-relocatable, <1MB Memory space -\ a0000 encode-64+ \ addr -\ 20000 encode-64+ \ size - -s" reg" property \ store "reg" property - -\ check wether we have already found a vga-device (vga-device-node? != 0) and if -\ this device has Expansion ROM -vga-device-node? 0= 30 config-l@ 0<> AND IF - \ remember this vga device's phandle - get-node to vga-device-node? -THEN - -cr - diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs deleted file mode 100644 index 39a02ded0..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-device_1002_515e.fs +++ /dev/null @@ -1,501 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -my-space pci-class-name type - -my-space assign-all-device-bars -my-space pci-device-props -my-space pci-set-irq-line - -7 4 config-w! - -\ Special notice from ATI: -\ ATI TECHNOLOGIES INC. ("ATI") HAS NOT ASSISTED IN THE CREATION OF, -\ AND DOES NOT ENDORSE THE USE OF, THIS SOFTWARE. ATI WILL NOT BE -\ RESPONSIBLE OR LIABLE FOR ANY ACTUAL OR ALLEGED DAMAGE OR LOSS -\ CAUSED BY OR IN CONNECTION WITH THE USE OF, OR RELIANCE ON, -\ THIS SOFTWARE. - -\ Description: This FCODE driver initializes the RN50 (ES1000) ATI -\ adaptor. - --1 value mem-addr --1 value regs-addr -false value is_installed - -: reg-rl@ regs-addr + rl@-le ; -: reg-rl! regs-addr + rl!-le ; -: map-in " map-in" $call-parent ; -: map-out " map-out" $call-parent ; -: pc@ ( offset -- byte ) regs-addr + rb@ ; -: pc! ( byte offset -- ) regs-addr + rb! ; - -0 value phys_low -0 value phys_mid -0 value phys_high -0 value phys_len - -: MAP-CSR-BASE ( -- ) - " assigned-addresses" get-my-property 0= if - begin dup 0> while ( prop-addr len ) - \ Get the phys-hi mid low and the low order 32 bits of the length - - decode-phys to phys_high to phys_mid to phys_low decode-int drop decode-int to phys_len - - phys_high H# FF and \ See which BAR this refers to - case - h# 10 of phys_low phys_mid phys_high h# 1000000 map-in to mem-addr endof - h# 18 of phys_low phys_mid phys_high phys_len map-in to regs-addr endof - endcase - repeat - ( prop-addr 0 ) 2drop - then - - ; - -: enable-card my-space 4 + dup config-b@ 3 or swap config-b! ; - -: EARLY-MAP ( -- ) - - " reg" get-my-property 0= if - begin dup 0> while ( prop-addr len ) - - \ Get the phys-hi mid low and the low order 32 bits of the length - - decode-phys to phys_high to phys_mid to phys_low decode-int drop decode-int to phys_len - - phys_high H# FF and \ See which BAR this refers to - case - h# 10 of phys_low phys_mid phys_high H# 1000000 map-in to mem-addr endof - h# 18 of phys_low phys_mid phys_high h# 1000 map-in to regs-addr endof - endcase - repeat - ( prop-addr 0 ) 2drop - then - ; - -: EARLY-UNMAP ( -- ) - - mem-addr -1 <> if - mem-addr h# 1000000 map-out - -1 to mem-addr - then - - regs-addr -1 <> if - regs-addr h# 1000 map-out - -1 to regs-addr - then - - ; - -CREATE INIT1_ARRAY -H# 0F8 ( CONFIG_MEMSIZE ) L, H# 00000000 L, H# 01000000 L, -H# 1C0 ( MPP_TB_CONFIG ) L, H# 00FFFFFF L, H# 07000000 L, -H# 030 ( BUS_CNTL ) L, H# 00000000 L, H# 5133A3B0 L, -H# 0EC ( RBBM_CNTL ) L, H# 00000000 L, h# 00004443 L, -H# 1D0 ( DEBUG_CNTL ) L, H# FFFFFFFD L, H# 00000002 L, -H# 050 ( CRTC_GEN_CNTL ) L, H# 00000000 L, H# 04000000 L, -H# 058 ( DAC_CNTL ) L, H# 00000000 L, H# FF604102 L, -H# 168 ( PAD_CTLR_STRENGTH ) L, H# FFFEFFFF L, H# 00001200 L, -H# 178 ( MEM_REFRESH_CNTL ) L, H# 00000000 L, H# 88888888 L, -H# 17C ( MEM_READ_CNTL ) L, H# 00000000 L, H# B7C20000 L, -H# 188 ( MC_DEBUG ) L, H# FFFFFFFF L, H# 00000000 L, -H# D00 ( DISP_MISC_CNTL) L, H# 00FFFFFF L, H# 5B000000 L, -H# 88C ( TV_DAC_CNTL ) L, H# F800FCEF L, H# 00490200 L, -H# D04 ( DAC_MACRO_CNTL) L, H# 00000000 L, H# 00000905 L, -H# 284 ( FP_GEN_CNTL ) L, H# FFFFFFFF L, H# 00000008 L, -H# 030 ( BUS_CNTL ) L, H# FFFFFFEF L, H# 00000000 L, - -here INIT1_ARRAY - /L / CONSTANT INIT1_LENGTH - - -CREATE INIT2_ARRAY - -H# 140 ( MEM_CNTL ) L, H# 00000000 L, H# 38001A01 L, 0 L, -H# 158 ( MEM_SDRAM_MODE_REG ) L, H# E0000000 L, H# 08320032 L, 0 L, -H# 144 ( MEM_TIMING_CNTL ) L, H# 00000000 L, H# 20123833 L, 0 L, -H# 14C ( MC_AGP_LOCATION ) L, H# 00000000 L, H# 000FFFF0 L, 0 L, -H# 148 ( MC_FB_LOCATION ) L, H# 00000000 L, H# FFFF0000 L, 0 L, -H# 154 ( MEM_INIT_LAT_TIMER ) L, H# 00000000 L, H# 34444444 L, 0 L, -H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# 00000000 L, H# 0A540002 L, 0 L, -H# 910 ( FCP_CNTL ) L, H# 00000000 L, H# 00000004 L, 0 L, -H# 010 ( BIOS_0_SCRATCH ) L, H# FFFFFFFB L, H# 00000004 L, 0 L, -H# D64 ( DISP_OUTPUT_CNTL ) L, H# FFFFFBFF L, H# 00000000 L, 0 L, -H# 2A8 ( TMDS_PLL_CNTL ) L, H# 00000000 L, H# 00000A1B L, 0 L, -H# 800 ( TV_MASTER_CNTL ) L, H# BFFFFFFF L, H# 40000000 L, 0 L, -H# D10 ( DISP_TEST_DBUG_CTL ) L, H# EFFFFFFF L, H# 10000000 L, 0 L, -H# 4DC ( OV0_FLAG_CNTRL ) L, H# FFFFFEFF L, H# 00000100 L, 0 L, -H# 034 ( BUS_CNTL1 ) L, H# 73FFFFFF L, H# 84000000 L, 0 L, -H# 174 ( AGP_CNTL ) L, H# FFEFFF00 L, H# 001E0000 L, 0 L, -H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# FFFFFFF9 L, H# 00000006 L, h# 000A L, -H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# FFFFFFFB L, H# 00000000 L, H# 000A L, -H# 18C ( MC_CHP_IO_OE_CNTL ) L, H# FFFFFFFD L, H# 00000000 L, 0 L, - -here INIT2_ARRAY - /L / CONSTANT INIT2_LENGTH - -CREATE PLLINIT_ARRAY - -H# 0D L, H# FFFFFFFF L, H# FFFF8000 L, 0 L, -H# 12 L, H# FFFFFFFF L, H# 00350000 L, 0 L, -H# 08 L, H# FFFFFFFF L, H# 00000000 L, 0 L, -H# 2D L, H# FFFFFFFF L, H# 00000000 L, 0 L, -H# 1F L, H# FFFFFFFF L, H# 0000000A L, 5 L, -H# 03 L, H# FFFFFFFF L, H# 0000003C L, 0 L, -H# 0A L, H# FFFFFFFF L, H# 00252504 L, 0 L, -H# 25 L, H# FFFFFFFF L, H# 00000005 L, 0 L, -H# 0E L, H# FFFFFFFF L, H# 04756400 L, 0 L, -H# 0C L, H# FFFFFFFF L, H# 04006401 L, 0 L, -H# 02 L, H# FFFFFFFF L, H# 0000A703 L, 0 L, -H# 0F L, H# FFFFFFFF L, H# 0000051C L, 0 L, -H# 10 L, H# FFFFFFFF L, H# 04000400 L, 5 L, -H# 0E L, H# FFFFFFFD L, H# 00000000 L, 5 L, -H# 0E L, H# FFFFFFFE L, H# 00000000 L, 5 L, -H# 12 L, H# FFFFFFFF L, H# 00350012 L, 5 L, -H# 0F L, H# FFFFFFFE L, H# 00000000 L, 6 L, -H# 10 L, H# FFFFFFFE L, H# 00000000 L, 5 L, -H# 10 L, H# FFFEFFFF L, H# 00000000 L, 6 L, -H# 0F L, H# FFFFFFFD L, H# 00000000 L, 5 L, -H# 10 L, H# FFFFFFFD L, H# 00000000 L, 5 L, -H# 10 L, H# FFFDFFFF L, H# 00000000 L, d# 10 L, -H# 0C L, H# FFFFFFFE L, H# 00000000 L, 6 L, -H# 0C L, H# FFFFFFFD L, H# 00000000 L, 5 L, -h# 0D L, H# FFFFFFFF L, H# FFFF8007 L, 5 L, -H# 08 L, H# FFFFFF3C L, H# 00000000 L, 0 L, -H# 02 L, H# FFFFFFFF L, H# 00000003 L, 0 L, -H# 04 L, H# FFFFFFFF L, H# 000381C0 L, 0 L, -H# 05 L, H# FFFFFFFF L, H# 000381F7 L, 0 L, -H# 06 L, H# FFFFFFFF L, H# 000381C0 L, 0 L, -H# 07 L, H# FFFFFFFF L, H# 000381F7 L, 0 L, -H# 02 L, H# FFFFFFFD L, H# 00000000 L, 6 L, -H# 02 L, H# FFFFFFFE L, H# 00000000 L, 5 L, -h# 08 L, H# FFFFFF3C L, H# 00000003 L, 5 L, -H# 0B L, H# FFFFFFFF L, H# 78000800 L, 0 L, -H# 0B L, H# FFFFFFFF L, H# 00004000 L, 0 L, -h# 01 L, h# FFFFFFFF L, H# 00000010 L, 0 L, - -here PLLINIT_ARRAY - /L / CONSTANT PLLINIT_LENGTH - -CREATE MEMINIT_ARRAY -h# 6FFF0000 L, H# 00004000 L, H# 6FFF0000 L, H# 80004000 L, -h# 6FFF0000 L, H# 00000132 L, H# 6FFF0000 L, H# 80000132 L, -h# 6FFF0000 L, H# 00000032 L, H# 6FFF0000 L, H# 80000032 L, -h# 6FFF0000 L, H# 10000032 L, -here MEMINIT_ARRAY - /L / CONSTANT MEMINIT_LENGTH -: L@+ ( addr -- value addr' ) - -dup l@ swap la1+ -; - -0 VALUE _len - -: ENCODE-ARRAY ( array len -- ) - dup to _len 0 do l@+ swap encode-int rot loop - drop _len 1 - 0 ?do encode+ loop -; - -: andorset ( reg and or -- ) - 2 pick dup reg-rl@ - 3 pick AND 2 pick OR swap reg-rl! 3drop -; - -: INIT1 -H# 0F8 ( CONFIG_MEMSIZE ) H# 00000000 H# 01000000 andorset \ Set 16Mb memory size -H# 1C0 ( MPP_TB_CONFIG ) H# 00FFFFFF H# 07000000 andorset -H# 030 ( BUS_CNTL ) H# 00000000 H# 5133A3B0 andorset -H# 0EC ( RBBM_CNTL ) H# 00000000 h# 00004443 andorset -H# 1D0 ( DEBUG_CNTL ) H# FFFFFFFD H# 00000002 andorset -H# 050 ( CRTC_GEN_CNTL ) H# 00000000 H# 04000000 andorset -H# 058 ( DAC_CNTL ) H# 00000000 H# FF604102 andorset -H# 168 ( PAD_CTLR_STRENGTH ) H# FFFEFFFF H# 00001200 andorset -H# 178 ( MEM_REFRESH_CNTL ) H# 00000000 H# 88888888 andorset -H# 17C ( MEM_READ_CNTL ) H# 00000000 H# B7C20000 andorset -H# 188 ( MC_DEBUG ) H# FFFFFFFF H# 00000000 andorset -H# D00 ( DISP_MISC_CNTL) H# 00FFFFFF H# 5B000000 andorset -H# 88C ( TV_DAC_CNTL ) H# F800FCEF H# 00490200 andorset -H# D04 ( DAC_MACRO_CNTL) H# 00000000 H# 00000905 andorset -H# 284 ( FP_GEN_CNTL ) H# FFFFFFFF H# 00000008 andorset -H# 030 ( BUS_CNTL ) H# FFFFFFEF H# 00000000 andorset -; - - -: INIT2 -H# 140 ( MEM_CNTL ) H# 00000000 H# 38001A01 andorset -H# 158 ( MEM_SDRAM_MODE_REG ) H# E0000000 H# 08320032 andorset -H# 144 ( MEM_TIMING_CNTL ) H# 00000000 H# 20123833 andorset -H# 14C ( MC_AGP_LOCATION ) H# 00000000 H# 000FFFF0 andorset -H# 148 ( MC_FB_LOCATION ) H# 00000000 H# FFFF0000 andorset -H# 154 ( MEM_INIT_LAT_TIMER ) H# 00000000 H# 34444444 andorset -H# 18C ( MC_CHP_IO_OE_CNTL ) H# 00000000 H# 0A540002 andorset -H# 910 ( FCP_CNTL ) H# 00000000 H# 00000004 andorset -H# 010 ( BIOS_0_SCRATCH ) H# FFFFFFFB H# 00000004 andorset -H# D64 ( DISP_OUTPUT_CNTL ) H# FFFFFBFF H# 00000000 andorset -H# 2A8 ( TMDS_PLL_CNTL ) H# 00000000 H# 00000A1B andorset -H# 800 ( TV_MASTER_CNTL ) H# BFFFFFFF H# 40000000 andorset -H# D10 ( DISP_TEST_DEBUG_CTL ) H# EFFFFFFF H# 10000000 andorset -H# 4DC ( OV0_FLAG_CNTRL ) H# FFFFFEFF H# 00000100 andorset -H# 034 ( BUS_CNTL1 ) H# 73FFFFFF H# 84000000 andorset -H# 174 ( AGP_CNTL ) H# FFEFFF00 H# 001E0000 andorset -H# 18C ( MC_CHP_IO_OE_CNTL ) H# FFFFFFF9 H# 00000006 andorset h# 000A ms -H# 18C ( MC_CHP_IO_OE_CNTL ) H# FFFFFFFB H# 00000000 andorset H# 000A ms -H# 18C ( MC_CHP_IO_OE_CNTL ) H# FFFFFFFD H# 00000000 andorset -; - -: CLK-CNTL-INDEX! 8 ( CLK_CNTL_INDEX ) reg-rl! ; - -: CLK-CNTL-INDEX@ 8 ( CLK_CNTL_INDEX ) reg-rl@ ; - -: PLLWRITEON clk-cntl-index@ H# 80 ( PLL_WR_ENABLE ) or clk-cntl-index! ; - -: PLLWRITEOFF clk-cntl-index@ H# 80 ( PLL_WR_ENABLE ) not and clk-cntl-index! ; \ Remove PLL_WR_ENABLE - -: CLKDATA! h# 0c ( CLK_CNTL_DATA ) reg-rl! ; - -: CLKDATA@ h# 0c ( CLK_CNTL_DATA ) reg-rl@ ; - -: PLLINDEXSET clk-cntl-index@ h# FFFFFFC0 and or clk-cntl-index! ; - -: PLLSET swap pllindexset clkdata! ; - -: pllandorset ( index and or -- ) - 2 pick pllindexset clkdata@ - 2 pick AND over OR clkdata! 3drop -; - -: PLLINIT -pllwriteon -H# 0D H# FFFF8000 pllset -H# 12 H# 00350000 pllset -H# 08 H# 00000000 pllset -H# 2D H# 00000000 pllset -H# 1F H# 0000000A pllset 5 ms - -H# 03 H# 0000003C pllset -H# 0A H# 00252504 pllset -H# 25 H# 00000005 pllset -H# 0E H# 04756400 pllset -H# 0C H# 04006401 pllset -H# 02 H# 0000A703 pllset -H# 0F H# 0000051C pllset -H# 10 H# 04000400 pllset 5 ms - -H# 0E H# FFFFFFFD 00 pllandorset 5 ms -H# 0E H# FFFFFFFE 00 pllandorset 5 ms -H# 12 H# 00350012 pllset 5 ms -H# 0F H# FFFFFFFE 00 pllandorset 6 ms -H# 10 H# FFFFFFFE 00 pllandorset 5 ms -H# 10 H# FFFEFFFF 00 pllandorset 6 ms -H# 0F H# FFFFFFFD 00 pllandorset 5 ms -H# 10 H# FFFFFFFD 00 pllandorset 5 ms -H# 10 H# FFFDFFFF 00 pllandorset d# 10 ms -H# 0C H# FFFFFFFE 00 pllandorset 6 ms -H# 0C H# FFFFFFFD 00 pllandorset 5 ms -h# 0D h# FFFF8007 pllset 5 ms -H# 08 H# FFFFFF3C 00 pllandorset -H# 02 h# FFFFFFFF 03 pllandorset -H# 04 H# 000381C0 pllset -H# 05 H# 000381F7 pllset -H# 06 H# 000381C0 pllset -H# 07 H# 000381F7 pllset -H# 02 H# FFFFFFFD 00 pllandorset 6 ms -H# 02 h# FFFFFFFE 00 pllandorset 5 ms -h# 08 H# FFFFFF3C 03 pllandorset 5 ms -H# 0B h# 78000800 pllset -H# 0B H# FFFFFFFF h# 4000 pllandorset -h# 01 h# FFFFFFFF h# 0010 pllandorset - -pllwriteoff -; - -: DYNCKE -pllwriteon -H# 14 H# FFFF3FFF H# 30 pllandorset -H# 14 H# FF1FFFFF H# 00 pllandorset -H# 01 h# FFFFFFFF h# 80 pllandorset -H# 0D H# 00000007 pllset 5 ms -h# 2D H# 0000F8C0 pllset -h# 08 H# FFFFFFFF h# C0 pllandorset 5 ms -pllwriteoff -; - -: MEM-MODE@ - h# 158 ( MEM_SDRAM_MODE_REG ) reg-rl@ ; - -: MEM-MODE! - h# 158 ( MEM_SDRAM_MODE_REG ) reg-rl! ; - -: MEM-STATUS@ - H# 150 reg-rl@ ; - -: WAIT-MEM-CMPLT - h# 8000 0 do mem-status@ 3 and 3 = if leave then loop ; - -: INITMEM - - mem-mode@ h# 6FFF0000 and h# 4000 or mem-mode! - mem-mode@ h# 6FFF0000 and h# 80004000 or mem-mode! - wait-mem-cmplt - mem-mode@ h# 6FFF0000 and h# 0132 or mem-mode! - mem-mode@ h# 6FFF0000 and h# 80000132 or mem-mode! - wait-mem-cmplt - mem-mode@ h# 6FFF0000 and h# 0032 or mem-mode! - mem-mode@ h# 6FFF0000 and h# 80000032 or mem-mode! - wait-mem-cmplt - mem-mode@ h# 6FFF0000 and h# 10000032 or mem-mode! -; - - - -: CLR-REG ( reg -- ) - 0 swap reg-rl! - -; -: SET-PALETTE ( -- ) - h# 0 h# b0 pc! \ Reset PALETTE_INDEX - - d# 16 0 do - H# 000000 h# B4 reg-rl! \ Write the PALETTE_DATA ( Auto increments) - H# aa0000 H# B4 reg-rl! - H# 00aa00 H# B4 reg-rl! - H# aa5500 H# B4 reg-rl! - H# 0000aa H# B4 reg-rl! - H# aa00aa H# B4 reg-rl! - H# 00aaaa H# B4 reg-rl! - H# aaaaaa H# B4 reg-rl! - H# 555555 H# B4 reg-rl! - H# ff5555 H# B4 reg-rl! - H# 55ff55 H# B4 reg-rl! - H# ffff55 H# B4 reg-rl! - H# 5555ff H# B4 reg-rl! - H# ff55ff H# B4 reg-rl! - H# 55ffff H# B4 reg-rl! - H# ffffff H# B4 reg-rl! - loop - - ; - -0 VALUE _addr -0 VALUE _color - -: DO-COLOR ( color-addr addr color -- ) - to _color to _addr 0 to _color - 3 0 do _addr i + c@ 2 i - 8 * << _color + to _color loop - _color h# B4 reg-rl! -; - -: SET-COLORS ( addr index #indices -- ) - - swap h# B0 pc! - ( addr #indices ) 0 ?do dup ( index ) i 3 * + DO-COLOR loop - ( addr ) drop ; - -: init-card - - h# FF h# 58 3 + pc! \ - h# 59 pc@ h# FE and h# 59 pc! \ - h# 50 reg-rl@ H# FEFFFFFF AND h# 02000200 or \ Clear 24 set 25 and 8-11 to 2 - h# 50 reg-rl! - h# 4F0063 h# 200 reg-rl! - H# 8C02A2 h# 204 reg-rl! - H# 1Df020C h# 208 reg-rl! - h# 8201EA h# 20C reg-rl! - h# 50 reg-rl@ H# F8FFFFFF AND h# 03000000 or h# 50 reg-rl! - h# 50 h# 22C reg-rl! - set-palette - - \ at this point for some reason mem-addr does not point - \ to the right address and therefore the following command - \ which should probably clean the frame buffer just - \ overwrites everything starting from 0 including the - \ exception vectors - - \ mem-addr h# F0000 0 fill - ; - -: DO-INIT - early-map - enable-card - init1 - pllinit - init2 - initmem - init-card - h# 8020 h# 54 reg-rl! - early-unmap -; - -d# 640 constant /scanline -d# 480 constant #scanlines -/scanline #scanlines * constant /fb - -" okay" encode-string " status" property - -: display-install ( -- ) - is_installed not if - map-csr-base - enable-card - mem-addr to frame-buffer-adr - h# 8020 h# 54 reg-rl! - default-font set-font - /scanline #scanlines d# 100 d# 40 fb8-install - true to is_installed - then -; - -: display-remove ( -- ) ; - -do-init \ Set up the card -\ clear at least 640x480 -10 config-l@ 8 - F0000 0 rfill -init1_array init1_length encode-array " ibm,init1" property -init2_array init2_length encode-array " ibm,init2" property -pllinit_array pllinit_length encode-array " ibm,pllinit" property -meminit_array meminit_length encode-array " ibm,meminit" property -0 0 encode-bytes " iso6429-1983-colors" property -s" display" device-type -/scanline encode-int " width" property - #scanlines encode-int " height" property -8 encode-int " depth" property -/scanline encode-int " linebytes" property - -' display-install is-install -' display-remove is-remove - -: fill-rectangle ( index x y w h -- ) - 2swap -rot /scanline * + frame-buffer-adr + ( index w h fbadr ) - swap 0 ?do ( index w fbadr ) - 3dup swap rot fill ( index w fbadr ) - /scanline + ( index w fbadr' ) - loop - 3drop -; -: draw-rectangle ( addr x y w h -- ) - 2swap -rot /scanline * + frame-buffer-adr + ( addr w h fbadr ) - swap 0 ?do ( addr w fbadr ) - 3dup swap move ( addr w fbadr ) - >r tuck + swap r> ( addr' w fbadr ) - /scanline + ( addr' w fbadr' ) - loop - 3drop - ; - : read-rectangle ( addr x y w h -- ) - 2swap -rot /scanline * + frame-buffer-adr + ( addr w h fbadr ) - swap 0 ?do ( addr w fbadr ) - 3dup -rot move ( addr w fbadr ) - >r tuck + swap r> ( addr' w fbadr ) - /scanline + ( addr' w fbadr' ) - loop - 3drop - ; - -: dimensions ( -- width height ) /scanline #scanlines ; - -." ( rn50 )" cr diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_028c.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_028c.fs deleted file mode 100644 index e83a4e04f..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_028c.fs +++ /dev/null @@ -1,25 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -my-space assign-all-device-bars -my-space pci-device-props -my-space pci-set-irq-line - -\ set Memory Write and Invalidate Enable, SERR# Enable (see PCI 3.0 Spec Chapter 6.2.2 device control) - -7 4 config-w! - - -\ Citrine storage controller. -s" citrine" - -include citrine.fs diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_02bd.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_02bd.fs deleted file mode 100644 index 1db6bdafc..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-device_1014_02bd.fs +++ /dev/null @@ -1,23 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -my-space assign-all-device-bars -my-space pci-device-props -my-space pci-set-irq-line - -\ set Memory Write and Invalidate Enable, SERR# Enable (see PCI 3.0 Spec Chapter 6.2.2 device control) -7 4 config-w! - -\ Citrine storage controller. -s" obsidian" - -include citrine.fs diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7451.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7451.fs deleted file mode 100644 index e540cba9c..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7451.fs +++ /dev/null @@ -1,34 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ IO-APIC init - -s" io-apic" 2dup device-name device-type -my-space pci-class-name type s" ( 8131 IO-APIC )" type - -pci-io-enable -pci-mem-enable -pci-master-enable - -my-space b rshift \ Get slot #. -dup c lshift fec00000 or \ Calculate base address. -dup 48 config-l! 0 4c config-l! \ Set base address. -03 44 config-b! \ Enable IO-APIC. - -s" ioapic.fs" included - -2 lshift 14 + \ Calculate first IRQ #. -init-ioapic \ Set IRQs. - -my-space pci-device-props - -cr diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7468.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7468.fs deleted file mode 100644 index 4126ca241..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7468.fs +++ /dev/null @@ -1,50 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -my-space assign-all-device-bars -my-space pci-device-props -my-space pci-set-irq-line - -\ See the "ISA/EISA/ISA-PnP" OF binding document. - -.( isa) - -s" isa" 2dup device-name device-type -\ We have to say it's ISA i.s.o. LPC, as otherwise Linux can't find -\ the serial port for its console. Linux uses the name instead of the -\ device type (and it completely ignores any "compatible" property). - -2 encode-int s" #address-cells" property -1 encode-int s" #size-cells" property - -\ We assume all ISA addresses to refer to I/O space. -: decode-unit 1 hex-decode-unit 1 ; -: encode-unit drop 1 hex-encode-unit ; - -\ 32kB of ISA I/O space. -1 encode-int my-space 01000000 + encode-64+ 0 encode-int+ 0 encode-int+ -8000 encode-int+ s" ranges" property - -: open true ; -: close ; - -\ There's a SIO chip on the LPC bus. -INCLUDE sio.fs - -\ There's also an Atmel TPM chip on JS21 -\ removed on Bimini Pass 2 and therefore disabled on all Biminis -u4? bimini? not and ?INCLUDE tpm.fs - -\ And finally there's the IPMI interface to the BMC. -u4? ?INCLUDE ipmi-kcs.fs - -cr diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7469.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7469.fs deleted file mode 100644 index fdae920c3..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-device_1022_7469.fs +++ /dev/null @@ -1,23 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -my-space assign-all-device-bars -my-space pci-device-props -my-space pci-set-irq-line - -7 4 config-w! - -s" ide" type cr - -include ide.fs - -cr diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-device_14e4_16a8.fs b/qemu/roms/SLOF/board-js2x/slof/pci-device_14e4_16a8.fs deleted file mode 100644 index ef782c948..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-device_14e4_16a8.fs +++ /dev/null @@ -1,23 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2013 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ Handle bcm57xx device - -s" bcm57xx [ net ]" type cr - -my-space pci-device-generic-setup - -pci-io-enable - -s" bcm57xx.fs" included - -pci-device-disable diff --git a/qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs b/qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs deleted file mode 100644 index 92851cd58..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/pci-interrupts.fs +++ /dev/null @@ -1,235 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ define function pointer as forward declaration for get-interrupt-line -\ this is board wireing and southbridge dependent -\ returns the wired interrupt line for this config addr -\ ( config-addr -- irq-line ) -DEFER pci-get-irq-line - -\ define function pointer as forward declaration for get-interrupt-sense-type -\ this is board wireing and southbridge dependent -\ returns the wired interrupt sense type for this config addr -\ 0 - Edge rising -\ 1 - Level low -\ 2 - Level high -\ 3 - Edge falling -\ ( config-addr -- irq-sense ) -DEFER pci-get-irq-sense - - -\ ***************************************************************************** -\ Generic IRQ routines -\ ***************************************************************************** - - - -: unknown-slot ( -- 0 ) -\ cr pci-vec ABORT" Unknown slot " - 0 -; -\ 0c s" /ht/@1/@2" PCI-X INTA & INTC Pnpirq0 -> irq12 -\ 0e s" /ht/@1/@2" PCI-X INTB & INTD Pnpirq1 -> irq14 -\ 10 s" /ht/@8,1" ATA -\ 0f s" /ht/@1/@1" Obsidian Pnpirq2 -> irq15 -\ 10 s" /ht/@7/@2" Video / Exar Serial PirqA -\ 11 s" /ht/@2/@4" Ethernet PirqB -\ 12 s" /ht/@2/@4,1" Ethernet PirqC -\ 13 s" /ht/@7/@0" USB PirqD -\ 13 s" /ht/@7/@0,1" USB PirqD -\ 13 s" /ht/@7/@0,2" USB PirqD - -\ 14 s" /ht/@3/@0" PCIe gpio28 -\ 15 s" /ht/@4/@0" PCIe gpio29 -\ 16 s" /ht/@5/@0" PCIe gpio30 -\ 17 s" /ht/@6/@0" PCIe gpio31 - - -\ ----------------------------------------------------------------------------- -\ Get the interrupt pin for a device on ht u4 -: u4-get-irq-line ( config-addr -- irq-line ) -\ cr s" u4-get-irq-line " type - pci-device-vec c@ CASE - 1 OF pci-device-vec-len 1 >= IF - pci-device-vec 1+ c@ CASE - 1 OF f ENDOF - 2 OF dup pci-interrupt@ CASE - 1 OF c ENDOF - 3 OF e ENDOF - 2 OF c ENDOF - 4 OF e ENDOF - ENDCASE - ENDOF - dup OF unknown-slot ENDOF - ENDCASE - ELSE - unknown-slot - THEN - ENDOF - 2 OF pci-device-vec-len 1 >= IF - pci-device-vec 1+ c@ CASE - 4 OF dup pci-addr2fn 1 >= IF 12 ELSE 11 THEN ENDOF - dup OF unknown-slot ENDOF - ENDCASE - ELSE - unknown-slot - THEN - ENDOF - 3 OF 14 ENDOF - 4 OF 15 ENDOF - 5 OF 16 ENDOF - 6 OF 17 ENDOF - 7 OF pci-device-vec-len 1 >= IF - pci-device-vec 1+ c@ CASE - 0 OF 13 ENDOF - 2 OF 10 ENDOF - dup OF unknown-slot ENDOF - ENDCASE - ELSE - unknown-slot - THEN - ENDOF - 8 OF 10 ENDOF - dup OF unknown-slot ENDOF - ENDCASE - swap drop -; - -\ ----------------------------------------------------------------------------- -\ Get the interrupt sense type for a device on ht u4 -: u4-get-irq-sense ( config-addr -- irq-sense ) -\ cr s" u4-get-irq-sense " type - u4-get-irq-line CASE - 0c OF 00 ENDOF - 0e OF 00 ENDOF - dup OF 01 ENDOF - ENDCASE -; - -\ 10 s" /ht/@4,1" set-pci-interrupt \ ATA -\ 13 s" /ht/@3/@0" set-pci-interrupt \ USB -\ 13 s" /ht/@3/@0,1" set-pci-interrupt \ USB -\ 13 s" /ht/@3/@0,2" set-pci-interrupt \ USB -\ 1c s" /ht/@2/@1" set-pci-interrupt \ Ethernet -\ 1d s" /ht/@2/@1,1" set-pci-interrupt \ Ethernet - -\ ----------------------------------------------------------------------------- -\ Get the interrupt pin for a device on ht u3 -: u3-get-irq-line ( config-addr -- irq-line ) -\ cr s" u3-get-irq-line " type - pci-device-vec c@ CASE - 2 OF pci-device-vec-len 1 >= IF - pci-device-vec 1+ c@ CASE - 1 OF dup pci-addr2fn 1 >= IF 1d ELSE 1c THEN ENDOF - dup OF unknown-slot ENDOF - ENDCASE - ELSE - unknown-slot - THEN - ENDOF - 3 OF 13 ENDOF - 4 OF 10 ENDOF - dup OF unknown-slot ENDOF - ENDCASE - swap drop -; - -\ ----------------------------------------------------------------------------- -\ Get the interrupt sense type for a device on ht u3 -: u3-get-irq-sense ( config-addr -- irq-sense ) -\ cr s" u3-get-irq-sense " type - u3-get-irq-line CASE - dup OF 01 ENDOF - ENDCASE -; - - - -\ ----------------------------------------------------------------------------- -\ Get the interrupt pin for a device on attu -: pcie-get-irq-line ( config-addr -- irq-line ) -\ cr s" pcie-get-irq-line " type - drop - 3 -; - - -\ ----------------------------------------------------------------------------- -\ Get the interrupt sense type for a device on attu -: pcie-get-irq-sense ( config-addr -- irq-sense ) -\ cr s" pcie-get-irq-sense " type - drop - 01 -; - -\ ----------------------------------------------------------------------------- -\ Set up the special routines for HT irq handling -: ht-irq-init ( -- ) -\ cr s" ht-irq-init " type - u4? IF - ['] u4-get-irq-line TO pci-get-irq-line - ['] u4-get-irq-sense TO pci-get-irq-sense - ELSE - ['] u3-get-irq-line TO pci-get-irq-line - ['] u3-get-irq-sense TO pci-get-irq-sense - THEN -; - -\ ----------------------------------------------------------------------------- -\ Set up the special routines for PCI-e irq handling -: pcie-irq-init ( -- ) -\ cr s" pcie-irq-init " type - ['] pcie-get-irq-sense TO pci-get-irq-sense - ['] pcie-get-irq-line TO pci-get-irq-line -; - -\ ----------------------------------------------------------------------------- -\ Set up the special routines for irq handling -0 VALUE mpic -: pci-irq-init ( mpic puid -- mpic ) - over TO mpic - 18 rshift FF and - CASE - F1 OF pcie-irq-init ENDOF - F2 OF ht-irq-init ENDOF - dup OF ABORT" Wrong PUID! in pci-irq-init" ENDOF - ENDCASE -; - -\ ----------------------------------------------------------------------------- -\ Set the interrupt pin for a device -: pci-set-irq-line ( config-addr -- ) -\ cr pci-vec - dup pci-get-irq-line -\ ." ->" dup . - swap pci-irq-line! -; - -\ ----------------------------------------------------------------------------- -\ Add an irq entry for the device at config-addr into the irq map -\ each entry consists of 7 integer values -\ Structure of an entry: -\ +----------+---+---+------------+--------------+---------+---------------+ -\ Number# | 0 | 1 | 2 | 3 | 4 | 5 | 6 | -\ +----------+---+---+------------+--------------+---------+---------------+ -\ meaning | config | | | int# | phandle | intr nr | pos edge (0) | -\ | addr | | | (1=a, 2=b, | intr contr | | act ll (1) | -\ +----------+---+---+------------+--------------+---------+---------------+ -\ value | pci slot | 0 | 0 | 1 | mpic | 7 | 0|1 | -\ +----------+---+---+------------+--------------+---------+---------------+ -: pci-gen-irq-entry ( prop-addr prop-len config-addr -- prop-addr prop-len ) - dup >r encode-int+ 0 encode-64+ \ config addr - r@ pci-interrupt@ encode-int+ \ interrupt type - mpic encode-int+ \ phandle to MPIC - r@ pci-irq-line@ encode-int+ \ interrupt number - r> pci-get-irq-sense encode-int+ \ trigger type -; diff --git a/qemu/roms/SLOF/board-js2x/slof/rtas.fs b/qemu/roms/SLOF/board-js2x/slof/rtas.fs deleted file mode 100644 index 0a90c2903..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/rtas.fs +++ /dev/null @@ -1,240 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -#include <rtas/rtas-init.fs> -#include <rtas/rtas-cpu.fs> -#include <rtas/rtas-reboot.fs> -#include <rtas/rtas-flash.fs> -#include <rtas/rtas-vpd.fs> - -\ for update-flash -: (get-flashside) ( -- flashside ) rtas-get-flashside ; - -' (get-flashside) to get-flashside - -\ remember the current flashside -get-flashside to flashside? - -\ for update-flash -: (set-flashside) ( flashside -- status ) - dup rtas-set-flashside = IF 0 ELSE -1 THEN -; - -' (set-flashside) to set-flashside - -: rtas-ibm-read-pci-config ( size puid bus devfn off -- x ) - [ s" ibm,read-pci-config" rtas-get-token ] LITERAL rtas-cb rtas>token l! - 4 rtas-cb rtas>nargs l! - 2 rtas-cb rtas>nret l! - swap 8 lshift or swap 10 lshift or rtas-cb rtas>args0 l! - dup 20 rshift rtas-cb rtas>args1 l! - ffffffff and rtas-cb rtas>args2 l! - rtas-cb rtas>args3 l! - enter-rtas - rtas-cb rtas>args5 l@ -; - -: rtas-fetch-cpus ( mask -- status ) - [ s" rtas-fetch-slaves" rtas-get-token ] LITERAL rtas-cb rtas>token l! - 1 rtas-cb rtas>nargs l! - 1 rtas-cb rtas>nret l! - rtas-cb rtas>args0 l! - 0 rtas-cb rtas>args1 l! - enter-rtas - rtas-cb rtas>args1 l@ -; - -: rtas-stop-bootwatchdog ( -- status ) - [ s" rtas-stop-bootwatchdog" rtas-get-token ] LITERAL rtas-cb rtas>token l! - 0 rtas-cb rtas>nargs l! - 1 rtas-cb rtas>nret l! - enter-rtas - rtas-cb rtas>args0 l@ -; - -: rtas-set-bootwatchdog ( seconds -- ) - [ s" rtas-set-bootwatchdog" rtas-get-token ] LITERAL rtas-cb rtas>token l! - 1 rtas-cb rtas>nargs l! - 0 rtas-cb rtas>nret l! - rtas-cb rtas>args0 l! - enter-rtas -; - -' rtas-set-bootwatchdog to set-watchdog - -: rtas-dump-flash ( offset cnt -- ) - [ s" rtas-dump-flash" rtas-get-token ] LITERAL rtas-cb rtas>token l! - 2 rtas-cb rtas>nargs l! - 0 rtas-cb rtas>nret l! - rtas-cb rtas>args0 l! - rtas-cb rtas>args1 l! - enter-rtas -; - -create blist 50 allot -blist 50 erase - -: build-blocklist_old - \ set version - 1 blist c! - \ set length of block list - 50 blist 7 + c! - \ no more block list - 0000000000000000 blist 8 + ! - \ first block - get-load-base 0 + blist 10 + ! - 80000 blist 18 + ! - get-load-base 80000 + blist 20 + ! - 80000 blist 28 + ! - get-load-base 100000 + blist 30 + ! - 80000 blist 38 + ! - get-load-base 180000 + blist 40 + ! - 8006C blist 48 + ! -; - -80000 constant _block_size - -: build-blocklist - \ set length of block list - \ length of flashfs at load-base is at offset 30... get it... - get-load-base 30 + @ - \ calculate the number of blocks we need - _block_size / 1 + - \ total number of blocks is 2 (for header and block_list extension + (number of blocks for flashfs * 2 (1 for address 1 for length)) - 2 * 2 + 8 * blist ! - \ set version ( in first byte only ) - 1 blist c! - \ no more block list - 0000000000000000 blist 8 + ! - \ length of flashfs at load-base is at offset 30... get it... - get-load-base 30 + @ - \ i define one block to be 64K, so calculate the number of blocks we need and loop over them - _block_size / 1 + 0 do - get-load-base _block_size i * + \ which position of load-base to store - blist 10 + \ at what offset of blist ( 0x8 + for header 0x8 + for extension ) - i 10 * + \ for each loop we have done 0x10 + - ! \ store it - get-load-base 30 + @ - _block_size i * - \ remaining length - dup _block_size > - IF \ is the remaining length > block size - drop _block_size \ then store the block size as length - ELSE - \ do nothing (store remaining length) - THEN - blist 10 + \ store the length at - i 10 * + \ correct blist offset - 8 + \ + 8 (we have stored address, now the length) - ! \ store it - loop -; - - - -: build-blocklist-v0_old - \ set version - 0 blist c! - 48 blist 7 + c! - \ first block - get-load-base 0 + blist 8 + ! - 80000 blist 10 + ! - get-load-base 80000 + blist 18 + ! - 80000 blist 20 + ! - get-load-base 100000 + blist 28 + ! - 80000 blist 30 + ! - get-load-base 180000 + blist 38 + ! - 8006C blist 40 + ! -; - -: build-blocklist-v0 - \ set length of block list - \ length of flashfs at load-base is at offset 30... get it... - get-load-base 30 + @ - \ calculate the number of blocks we need - _block_size / 1 + - \ total number of blocks is 1 (for header + (number of blocks for flashfs * 2 (1 for address 1 for length)) - 2 * 1 + 8 * blist ! - \ length of flashfs at load-base is at offset 30... get it... - get-load-base 30 + @ - \ i define one block to be 64K, so calculate the number of blocks we need and loop over them - _block_size / 1 + 0 do - get-load-base _block_size i * + \ which position of load-base to store - blist 8 + \ at what offset of blist ( 0x8 + for header) - i 10 * + \ for each loop we have done 0x10 + - ! \ store it - get-load-base 30 + @ - _block_size i * - \ remaining length - dup _block_size > - IF \ is the remaining length > block size - drop _block_size \ then store the block size as length - ELSE - \ do nothing (store remaining length) - THEN - blist 8 + \ store the length at - i 10 * + \ correct blist offset - 8 + \ + 8 (we have stored address, now the length) - ! \ store it - loop -; - - -: yy - build-blocklist - blist rtas-ibm-update-flash-64-and-reboot -; - -: yy0 - build-blocklist-v0 - blist rtas-ibm-update-flash-64-and-reboot -; - -: rtas-ibm-update-flash-64 ( block-list -- status ) - [ s" ibm,update-flash-64" rtas-get-token ] LITERAL rtas-cb rtas>token l! - 2 rtas-cb rtas>nargs l! - 1 rtas-cb rtas>nret l! - rtas-cb rtas>args0 l! - \ special unofficial parameter: if this is set to 1, the rtas function will not check, wether - \ we are on the perm side... this is needed for "update-flash -c" to work... - 1 rtas-cb rtas>args1 l! - enter-rtas - rtas-cb rtas>args2 l@ -; - -\ for update-flash -: flash-write ( image-address -- status) - load-base-override >r to load-base-override build-blocklist-v0 - blist rtas-ibm-update-flash-64 - r> to load-base-override 0= IF true ELSE false THEN -; - -: commit 1 rtas-ibm-manage-flash-image ; -: reject 0 rtas-ibm-manage-flash-image ; - -: rtas-ibm-validate-flash-image ( image-to-commit -- status ) - [ s" ibm,validate-flash-image" rtas-get-token ] LITERAL rtas-cb rtas>token l! - 2 rtas-cb rtas>nargs l! - 2 rtas-cb rtas>nret l! - rtas-cb rtas>args0 l! - enter-rtas - rtas-cb rtas>args1 l@ -; - -: rtas-get-blade-descr ( address size -- len status ) - [ s" rtas-get-blade-descr" rtas-get-token ] LITERAL rtas-cb rtas>token l! - 2 rtas-cb rtas>nargs l! - 2 rtas-cb rtas>nret l! - rtas-cb rtas>args1 l! - rtas-cb rtas>args0 l! - enter-rtas - rtas-cb rtas>args2 l@ - rtas-cb rtas>args3 l@ -; diff --git a/qemu/roms/SLOF/board-js2x/slof/rtc.fs b/qemu/roms/SLOF/board-js2x/slof/rtc.fs deleted file mode 100644 index 861b3f9ff..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/rtc.fs +++ /dev/null @@ -1,59 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ National Semiconductor SIO. -\ See http://www.national.com/pf/PC/PC87417.html for the datasheet. -\ PC87417.pdf -\ moved the RTC initialisation from the device tree to a much earlier point -\ so that the RTC can be accessed before device tree is generated - -\ Enable the RTC, set its address at 1070 -\ see PC87417.pdf page 39 (chapter 3.2.3) -10 7 siocfg! -1 30 siocfg! -1070 wbsplit nip dup 60 siocfg! 62 siocfg! - -: rtc@ ( offset -- value ) - 1070 io-c! 1071 io-c@ -; - -: rtc! ( value offset -- ) - 1070 io-c! 1071 io-c! -; - -\ Set sane configuration; BCD mode is required by Linux. -\ PC87417.pdf page 153 (chapter 8.3.13) - RTC Control Register A -\ 20 - Divider Chain Control = Normal Operation -20 0a rtc! -\ PC87417.pdf page 155 (chapter 8.3.14) - RTC Control Register B -\ 02 - 24-hour format enabled -02 0b rtc! -\ PC87417.pdf page 156 (chapter 8.3.15) - RTC Control Register C -00 0c rtc! - -\ read from the rtc and do the bcd-to-bin conversion -: rtc-bin@ ( offset -- value ) - rtc@ bcd-to-bin -; - -\ to be compatible with the cell boards we provide a .date word -\ .date prints the current date and time on the firmware prompt -: .date ( -- ) - 0 rtc-bin@ ( seconds ) - 2 rtc-bin@ - 4 rtc-bin@ - 7 rtc-bin@ - 8 rtc-bin@ ( seconds minutes hours day month ) - 9 rtc-bin@ d# 1900 + dup d# 1970 < IF d# 100 + THEN - decimal 4 0.r 2d emit 2 0.r 2d emit 2 0.r space - 2 0.r 3a emit 2 0.r 3a emit 2 0.r hex -; diff --git a/qemu/roms/SLOF/board-js2x/slof/serial.fs b/qemu/roms/SLOF/board-js2x/slof/serial.fs deleted file mode 100644 index 98b2f2939..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/serial.fs +++ /dev/null @@ -1,48 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ Serial console. Enabled very early. -\ remember last console used -CREATE lastser 4 allot 0 lastser l! - -\ On JS21, use serial port 2. Detect Maui by looking at the SIO version. -20 siocfg@ f2 = IF 2f8 ELSE 3f8 THEN - -: >serial LITERAL + ; -: js21? -2f8 >serial 0= ; -: serial! js21? IF 2dup 2f8 + io-c! THEN 3f8 + io-c! ; -: serial1@ 3f8 + io-c@ ; -: serial2@ 2f8 + io-c@ ; - -: serial-init 0 1 serial! 0 2 serial! - 80 3 serial! d# 115200 swap / 0 serial! 0 1 serial! - 3 3 serial! 3 4 serial! ; -: serial-emit BEGIN 5 serial1@ 20 and UNTIL - js21? IF BEGIN 5 serial2@ 20 and UNTIL THEN 0 serial! ; -: serial1-key? 5 serial1@ 1 and 0<> ; -: serial2-key? 5 serial2@ 1 and 0<> ; -: serial1-key serial1-key? dup IF 0 serial1@ swap 0 lastser l! THEN ; -: serial2-key serial2-key? dup IF 0 serial2@ swap 1 lastser l! THEN ; -: serial-key BEGIN serial1-key dup IF ELSE js21? IF drop serial2-key THEN THEN UNTIL ; -: serial-key? serial1-key? js21? IF serial2-key? or THEN ; - -\ : serial-key BEGIN 5 serial2@ 1 and UNTIL 0 serial2@ ; -\ : serial-key? 5 serial2@ 1 and 0<> ; - -d# 19200 serial-init -' serial-emit to emit -' serial-key to key -' serial-key? to key? - -( .( SLOF) -\ .( has started execution, serial console @ ) 0 >serial . diff --git a/qemu/roms/SLOF/board-js2x/slof/sio.fs b/qemu/roms/SLOF/board-js2x/slof/sio.fs deleted file mode 100644 index 554cf83e3..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/sio.fs +++ /dev/null @@ -1,85 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ National Semiconductor SIO. -\ See http://www.national.com/pf/PC/PC87417.html for the datasheet. - -\ We use both serial ports, and the RTC. - -\ See 3.7.5. -new-device 3f8 1 set-unit - -s" serial" 2dup device-name device-type - -\ Enable this UART. -3 7 siocfg! 1 30 siocfg! - -\ 8 bytes of ISA I/O space -my-unit encode-int rot encode-int+ 8 encode-int+ s" reg" property -d# 19200 encode-int s" current-speed" property -44 encode-int 0 encode-int+ s" interrupts" property - -: open true ; -: close ; -: write ( adr len -- actual ) tuck type ; -: read ( adr len -- actual ) 0= IF drop 0 EXIT THEN - serial-key? 0= IF 0 swap c! -2 EXIT THEN - serial-key swap c! 1 ; - -finish-device - - -new-device 2f8 1 set-unit - -s" serial" 2dup device-name device-type - -\ Enable this UART. -2 7 siocfg! 1 30 siocfg! - -\ 8 bytes of ISA I/O space -my-unit encode-int rot encode-int+ 8 encode-int+ s" reg" property -d# 19200 encode-int s" current-speed" property -43 encode-int 0 encode-int+ s" interrupts" property - -: open true ; -: close ; -: write ( adr len -- actual ) tuck type ; -: read ( adr len -- actual ) 0= IF drop 0 EXIT THEN - serial-key? 0= IF 0 swap c! -2 EXIT THEN - serial-key swap c! 1 ; - -finish-device - - - -\ See the "Device Support Extensions" OF Recommended Practice document. -new-device 1070 1 set-unit - -s" rtc" 2dup device-name device-type -\ Following is for Linux, to recognize this RTC: -s" pnpPNP,b00" compatible - -: rtc! my-space io-c! my-space 1+ io-c! ; -: rtc@ my-space io-c! my-space 1+ io-c@ ; - -\ 10 bytes of ISA I/O space, at 1070. -my-unit encode-int rot encode-int+ 10 encode-int+ s" reg" property - -: open true ; -: close ; - -\ XXX: dummy methods. -: get-time ( -- sec min hr day mth yr ) 38 22 c 1 1 d# 1973 ; -: set-time ( sec min hr day mth yr -- ) 3drop 3drop ; - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/tpm.fs b/qemu/roms/SLOF/board-js2x/slof/tpm.fs deleted file mode 100644 index 69b9bc409..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/tpm.fs +++ /dev/null @@ -1,63 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ Atmel TPM. - -new-device 500 1 set-unit - -s" tpm" 2dup device-name device-type - -s" AT97SC3201" compatible - -\ 2 bytes of ISA I/O space -my-unit encode-int rot encode-int+ 2 encode-int+ s" reg" property - -: >tpm 4e io-c! ; -: tpm@ >tpm 4f io-c@ ; -: tpm! >tpm 4f io-c! ; - -: dump-tpm 11 0 DO cr i 2 .r space i tpm@ 2 0.r LOOP ; - -my-address wbsplit 9 tpm! 8 tpm! \ set base address -0 a tpm! \ disable serint - -\ Now we need to execute TPM_Startup. -CREATE startup-cmd -0 c, c1 c, -0 c, 0 c, 0 c, c c, -0 c, 0 c, 0 c, 99 c, \ TPM_ORD_Startup -0 c, 1 c, \ TCPA_ST_CLEAR - -: send ( addr len -- ) bounds ?DO i c@ 500 io-c! LOOP ; -: wait-for-ready ( -- ) BEGIN 501 io-c@ 3 and 2 = UNTIL ; -: recv-verbose ( -- ) - cr ." TPM result: " - 500 io-c@ 2 0.r 500 io-c@ 2 0.r space - 500 io-c@ 500 io-c@ 500 io-c@ 500 io-c@ - bljoin lbflip 6 - dup 8 0.r space 0 - ?DO 500 io-c@ . LOOP -; - -: recv ( -- ) - 500 io-c@ drop 500 io-c@ drop - 500 io-c@ 500 io-c@ 500 io-c@ 500 io-c@ - bljoin lbflip 6 - 0 - ?DO 500 io-c@ drop LOOP -; - -startup-cmd c send wait-for-ready recv - -: open true ; -: close ; - -finish-device diff --git a/qemu/roms/SLOF/board-js2x/slof/tree.fs b/qemu/roms/SLOF/board-js2x/slof/tree.fs deleted file mode 100644 index 040d99f09..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/tree.fs +++ /dev/null @@ -1,225 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -400 cp - -0 value puid - -: >conf-rtas ( config-addr -- config-addr ) - puid f2000000 >= IF - ffffff AND \ Mask away highest byte for normal PCI - dup ffff > IF - 1000000 + - THEN - THEN - puid + -; - -: rtas-config-b@ ( config-addr -- value ) >conf-rtas rb@ ; -: rtas-config-b! ( value config-addr -- ) >conf-rtas rb! ; -: rtas-config-w@ ( config-addr -- value ) >conf-rtas rw@-le ; -: rtas-config-w! ( value config-addr -- ) >conf-rtas rw!-le ; -: rtas-config-l@ ( config-addr -- value ) >conf-rtas rl@-le ; -: rtas-config-l! ( value config-addr -- ) >conf-rtas rl!-le ; - -440 cp - -#include "pci-scan.fs" - -480 cp - -\ The root of the device tree and some of its kids. - -s" /" find-device -\ read model string from VPD -vpd-read-model ( straddr strlen ) -\ if it is a bimini, we replace the "IBM," in the model string with "TSS," -bimini? IF - 2dup drop 4 ( straddr strlen str 4 ) \ for string comparison: only first 4 bytes ("IBM,") - \ string comparison - s" IBM," str= IF - \ model starts with "IBM,", we replace it with "TSS," - 2dup drop s" TSS," ( straddr strlen straddr replacestr len ) - rot swap ( straddr strlen replacestr straddr len ) \ correct order for move: src dest len - move ( straddr strlen ) \ now we have TSS, at beginning of str... - THEN -THEN -\ store the model string -encode-string s" model" property - -2 encode-int s" #address-cells" property -2 encode-int s" #size-cells" property - -\ XXX: what requires this? Linux? -0 encode-int f8040000 encode-int+ -0 encode-int+ f8050000 encode-int+ s" platform-open-pic" property - -\ Yaboot is stupid. Without this, it can't/won't find /etc/yaboot.conf. -s" chrp SLOF based 970 blade" device-type - -\ add more information to the compatible property -js21? IF - bimini? IF - s" IBM,Bimini" - ELSE - s" IBM,JS21" - THEN -ELSE - s" IBM,JS20" -THEN encode-string -\ To get linux-2.6.10 and later to work out-of-the-box. -s" Momentum,Maple" encode-string encode+ s" compatible" property - - -\ See 3.6.5, and the PowerPC OF binding document. -new-device -s" mmu" 2dup device-name device-type -0 0 s" translations" property - -: open true ; -: close ; - -finish-device - -new-device flash-addr set-unit-64 - s" flash" 2dup device-name device-type - 0 encode-int flash-addr encode-int+ - 0 encode-int+ get-flash-size encode-int+ s" reg" property - get-flash-size encode-int s" #bytes" property - 0 0 s" used-by-rtas" property - : open true ; - : close ; -finish-device - -4a0 cp - -new-device nvram-base set-unit-64 - s" nvram" 2dup device-name device-type - nvram-size encode-int s" #bytes" property - 0 encode-int nvram-base encode-int+ - 0 encode-int+ nvram-size encode-int+ s" reg" property - get-node node>path s" nvram" 2swap set-alias - : open true ; - : close ; -finish-device - -4c0 cp - -#include "memory.fs" - -500 cp - -#include "mpic.fs" - -580 cp - -#include "dart.fs" - -5a0 cp - -#include "i2c.fs" - -600 cp -get-node device-end -620 cp -\ if it is js21/bimini the fbuffer code is included -u4? ?include fbuffer.fs -640 cp -set-node - -690 cp - -#include "ht.fs" - -6b0 cp - -u4? ?include attu.fs -6c0 cp - -\ See the PowerPC OF binding document. -new-device -s" cpus" device-name - -1 encode-int s" #address-cells" property -0 encode-int s" #size-cells" property - -: decode-unit 1 hex-decode-unit ; -: encode-unit 1 hex-encode-unit ; - -cpu-mask @ 40 0 DO dup 1 and IF -i s" cpu.fs" INCLUDED THEN u2/ LOOP drop - -: open true ; -: close ; - -finish-device - -master-cpu s" /cpus/@" rot (u.) $cat open-dev encode-int s" cpu" set-chosen -s" /memory" open-dev encode-int s" memory" set-chosen - -6e0 cp - -new-device - s" rtas" device-name - - rtas-size encode-int s" rtas-size" property - 00000001 encode-int s" ibm,flash-block-version" property - 00000001 encode-int s" rtas-event-scan-rate" property - rtas-create-token-properties - 00000001 encode-int s" rtas-version" property - -: open true ; -: close ; - -: instantiate-rtas instantiate-rtas ; - -finish-device - -700 cp - -device-end - -\ Hack for AIX. -s" /options" find-device - \ s" 33554432" encode-string s" load-base" property - s" 16384" encode-string s" load-base" property -device-end - -\ See 3.5. -s" /openprom" find-device - s" SLOF," slof-build-id here swap rmove here slof-build-id nip $cat encode-string s" model" property - 0 0 s" relative-addressing" property - flashside? 1 = IF s" T" ELSE s" P" THEN - encode-string s" ibm,fw-bank" property - takeover? not IF - 0 set-flashside drop - read-version-and-date s" ibm,fw-perm-bank" property - 1 set-flashside drop - read-version-and-date s" ibm,fw-temp-bank" property - flashside? set-flashside drop - THEN -device-end - -s" /aliases" find-device - : open true ; - : close ; -device-end - -s" /mmu" open-dev encode-int s" mmu" set-chosen - -#include "available.fs" - -#include <term-io.fs> - -u3? IF s" /ht/isa/serial@3f8" io - ELSE s" /ht/isa/serial@2f8" io THEN - diff --git a/qemu/roms/SLOF/board-js2x/slof/u4-mem.fs b/qemu/roms/SLOF/board-js2x/slof/u4-mem.fs deleted file mode 100644 index 0f8b1eef6..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/u4-mem.fs +++ /dev/null @@ -1,313 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - - -\ U4 DDR2 memory controller. - -cr .( Setting up memory controller...) - - -\ First, I2C access to the SPDs. - -: >i2c f8001000 + ; -: i2c@ >i2c rl@ ; -: i2c! >i2c rl! ; - -: .i2c 80 0 DO i i2c@ . 10 +LOOP ; - -: i2c-addr ( addr -- ) 50 i2c! 2 10 i2c! BEGIN 30 i2c@ 2 and UNTIL ; -: i2c-addr-subaddr ( addr suba -- ) 60 i2c! i2c-addr ; -: i2c-stop ( -- ) BEGIN 30 i2c@ dup 30 i2c! 4 and UNTIL ; -: i2c-nak? ( -- failed? ) 20 i2c@ 2 and 0= dup IF i2c-stop THEN ; -: i2c-short? ( -- failed? ) 30 i2c@ 4 and 0<> dup IF 0 10 i2c! i2c-stop THEN ; -: i2c-aak-if-more ( n -- ) 1 <> 1 and 10 i2c! ; - -: i2c-sub-read ( buf len addr suba -- error? ) - c 0 i2c! >r 1 or r> i2c-addr-subaddr i2c-nak? IF 2drop true EXIT THEN - dup i2c-aak-if-more 2 30 i2c! - BEGIN - 30 i2c@ 1 and IF - 1- >r 70 i2c@ over c! char+ r> - dup 0= IF i2c-stop 2drop false EXIT THEN - dup i2c-aak-if-more 1 30 i2c! THEN - i2c-short? IF 2drop true EXIT THEN - AGAIN ; - - -\ What slots are filled with working memory (bitmask). - -f VALUE dimms-valid -: dimm-invalid 1 swap lshift invert dimms-valid and to dimms-valid ; -: dimm-invalid dup dimm-invalid 2 xor dimm-invalid ; \ DIMMs are paired -: dimm-valid? 1 swap lshift dimms-valid and ; -: dimm( +comp postpone 4 postpone 0 postpone DO - postpone i postpone dimm-valid? postpone IF ; immediate -: )dimm postpone THEN postpone LOOP -comp ; immediate - - -\ The data from the SPDs. - -CREATE spds 100 allot -: spd@ ( dimm# off -- value ) swap 40 * + spds + c@ ; - -CREATE addresses a0 c, a4 c, a2 c, a6 c, -dimm( spds i 40 * + 40 addresses i + c@ 0 i2c-sub-read IF i dimm-invalid THEN )dimm - - -\ Accessors. - -: spd>rows 3 spd@ ; -: spd>cols 4 spd@ ; -: spd>ranks 5 spd@ 7 and 1+ ; -: spd>width d spd@ ; -: spd>banks 11 spd@ ; -: spd>cas 12 spd@ ; \ bit mask of allowable CAS latencies -: spd>trp 1b spd@ ; \ in units of 0.25 ns -: spd>trrd 1c spd@ ; \ in units of 0.25 ns -: spd>trcd 1d spd@ ; \ in units of 0.25 ns -: spd>tras 1e spd@ ; \ in units of 1 ns -: spd>twr 24 spd@ ; \ in units of 0.25 ns -: spd>twtr 25 spd@ ; \ in units of 0.25 ns -: spd>trtp 26 spd@ ; \ in units of 0.25 ns -: spd>trc 29 spd@ ; \ in units of 1 ns XXX: should also look at byte 28 -: spd>trfc 2a spd@ ; \ in units of 1 ns XXX: should also look at byte 28 - -cr .( rows cols ranks width banks trp trrd trcd tras twr twtr trtp trc trfc) -cr .( =====================================================================) -decimal -dimm( cr -i spd>rows 4 .r i spd>cols 5 .r i spd>ranks 6 .r i spd>width 6 .r -i spd>banks 6 .r i spd>trp 4 .r i spd>trrd 5 .r i spd>trcd 5 .r -i spd>tras 5 .r i spd>twr 4 .r i spd>twtr 5 .r i spd>trtp 5 .r -i spd>trc 4 .r i spd>trfc 5 .r -)dimm -hex - -ff dimm( i spd>cas and )dimm CONSTANT cl-supported -: max-cl -1 swap 8 0 DO dup 1 and IF nip i swap THEN u2/ LOOP drop ; -cl-supported max-cl VALUE cl - -: tck>60*ns dup f and swap 4 rshift a * over + 6 * swap CASE - a OF 2d - ENDOF b OF 2e - ENDOF c OF 20 - ENDOF d OF 21 - ENDOF - ENDCASE ; -: cl>tck 0 spd>cas max-cl swap - - CASE 0 OF 9 ENDOF 1 OF 17 ENDOF 2 OF 19 ENDOF - true ABORT" No supported CAS latency for this DIMM" ENDCASE - 0 swap spd@ tck>60*ns ; - -: spd>min-tck dup spd>cas max-cl cl - - CASE 0 OF 9 ENDOF 1 OF 17 ENDOF 2 OF 19 ENDOF - true ABORT" No supported CAS latency for this DIMM" ENDCASE - spd@ tck>60*ns ; -: spd>max-tck 2b spd@ tck>60*ns ; - -: .tck base @ >r decimal dup d# 60 / 0 .r [char] . emit - d# 60 mod d# 1000 * d# 60 / 3 0.r ." ns" r> base ! ; - -cr .( CAS latencies supported: ) -8 0 DO cl-supported 1 i lshift and IF i . THEN LOOP - -\ Find the lowest CL at the highest tCK. -8 0 DO cl-supported 1 i lshift and IF cl cl>tck i cl>tck = IF - i to cl LEAVE THEN THEN LOOP - -.( -- using ) cl . - - -0 dimm( i spd>min-tck max )dimm CONSTANT tck -dimm( i spd>max-tck tck < IF i dimm-invalid THEN )dimm -cr .( tCK is ) tck .tck - - -0 CONSTANT al -cl al + CONSTANT rl -rl 1- CONSTANT wl - -: // dup >r 1- + r> / ; \ round up -0 spd>tras d# 60 * tck // CONSTANT tras -0 spd>trtp d# 15 * tck // CONSTANT trtp -0 spd>twr d# 15 * tck // CONSTANT twr -0 spd>trp d# 15 * tck // CONSTANT trp -0 spd>trrd d# 15 * tck // CONSTANT trrd -0 spd>trrd d# 60 * tck // CONSTANT 4*trrd -0 spd>trcd d# 15 * tck // CONSTANT trcd -0 spd>trc d# 60 * tck // CONSTANT trc -0 spd>twtr d# 15 * tck // CONSTANT twtr - -: spd>memmd - >r r@ spd>rows r@ spd>cols + - r@ spd>banks 2log + 4 * r> spd>width 2log 3 * + 6c - ; -: dimm-group-size ( dimm# -- size ) - >r r@ spd>rows r@ spd>cols + 1 swap lshift - r@ spd>banks * r> spd>ranks * 10 * ; -VARIABLE start-address -VARIABLE was-prev-big -: assign-dimm-group ( dimm# -- config-value ) - dup dimm-valid? 0= IF drop 0 EXIT THEN - \ MemMd, enable, single-sided or not - dup spd>memmd c lshift 1 or over spd>ranks 1 = IF 2 or THEN -cr ." ---> " dup . ->r - dimm-group-size start-address @ 2dup + rot ( start end size ) - 80000000 > IF - dup 1000000000 < IF dup 4 rshift ELSE 08000000 THEN r> or >r \ Add2G - over 0<> IF over c rshift ELSE 00080000 THEN r> or >r \ Sub2G - was-prev-big on - ELSE - was-prev-big @ IF 80000000 + swap 80000000 + swap THEN r> 08080000 or >r - was-prev-big off - THEN - swap 18 rshift r> or >r \ start address - dup 80000000 = IF drop 100000000 THEN start-address ! r> ; - - -\ Now set the frequency in the memory controller -d# 1800 tck / 4 - 12 lshift 33c or f8000800 rl! -f8000860 rl@ 80000000 or f8000860 rl! 10000 0 DO LOOP - -: mc! f8002000 + rl! ; -: mc@ f8002000 + rl@ ; - - -\ memory timing regs (state machine) - -tras 2- -5 lshift al trtp + 2- or -5 lshift wl twr + or -5 lshift trp 2- or -5 lshift trp 2- 0 spd>banks 8 = IF 1+ THEN or -7 lshift 030 mc! - -al trtp + trp + 2- -5 lshift cl al + twr + trp + 1- or -5 lshift trrd 2- or -5 lshift trc 2- or -5 lshift trcd 2- or -5 lshift 4*trrd or -2 lshift 040 mc! - -0 -5 lshift 1 or -5 lshift 1 or -5 lshift cl 1- twtr + or -5 lshift 1 or -5 lshift 1 or -2 lshift 050 mc! - -0 -5 lshift 1 or -5 lshift 1 or -5 lshift 2 or -5 lshift 2 or -5 lshift 2 or -2 lshift 060 mc! \ XXX joerg has different setting - -cl 3 = IF 30801800 ( 30800d00 ) 070 mc! \ XXX memory refresh -ELSE 41002000 070 mc! THEN - -\ memory size regs - -1 dimm-group-size 0 dimm-group-size > 1 0 rot IF swap THEN \ biggest first -assign-dimm-group 200 mc! -assign-dimm-group 210 mc! -0 220 mc! 0 230 mc! - - - - - -\ arbiter tunables -\ 40041040 270 mc! -04041040 270 mc! -50000000 280 mc! -\ a0a00000 290 mc! \ a0000000 might be faster -00000000 290 mc! -\ 20020820 2a0 mc! -04020822 2a0 mc! -00000000 2b0 mc! -\ 30413cc7 2c0 mc! \ have to calculate the low five bits -30413dc5 2c0 mc! -\ cl 3 = IF 76000050 2d0 mc! 70000000 2e0 mc! ELSE -cl 3 = IF 75000050 2d0 mc! 70000000 2e0 mc! ELSE - b8002080 2d0 mc! b0000000 2e0 mc! THEN -\ Should test for something else really - - - -cl 3 = IF 00006000 890 mc! 00006000 8a0 mc! ELSE - 00006500 890 mc! 00006500 8a0 mc! THEN - -cl 3 = IF 1e008a8a ELSE 31000000 THEN -dup 800 mc! dup 810 mc! dup 820 mc! dup 830 mc! -dup 900 mc! dup 910 mc! dup 920 mc! dup 930 mc! dup 980 mc! -dup a00 mc! dup a10 mc! dup a20 mc! dup a30 mc! -dup b00 mc! dup b10 mc! dup b20 mc! dup b30 mc! b80 mc! - -\ 0 8d0 mc! 0 9d0 mc! 0 ad0 mc! 0 bd0 mc! -61630000 8d0 mc! -61630000 9d0 mc! -52510000 ad0 mc! -434e0000 bd0 mc! - -a0200400 100 mc! -80020000 110 mc! -80030000 120 mc! -80010404 130 mc! -cl 3 = IF -8000153a 140 mc! ELSE -8000174a 140 mc! THEN -a0200400 150 mc! -\ 92000000 160 mc! -\ 92000000 170 mc! -\ 91300000 160 mc! -\ 91300000 170 mc! -91800000 160 mc! -91800000 170 mc! -cl 3 = IF -8ff0143a 180 mc! ELSE -8ff0164a 180 mc! THEN -80010784 190 mc! -80010404 1a0 mc! -0 1b0 mc! 0 1c0 mc! 0 1d0 mc! 0 1e0 mc! 0 1f0 mc! - -cl 3 = IF -143a 0c0 mc! ELSE -164a 0c0 mc! THEN -0404 0d0 mc! - -\ after this point, setup is common for all speeds and sizes of dimms (sort of) - -60000000 3a0 mc! - -0 840 mc! 0 850 mc! 0 860 mc! 0 870 mc! -0 940 mc! 0 950 mc! 0 960 mc! 0 970 mc! 0 990 mc! -0 a40 mc! 0 a50 mc! 0 a60 mc! 0 a70 mc! -0 b40 mc! 0 b50 mc! 0 b60 mc! 0 b70 mc! 0 b90 mc! - -0 880 mc! - -001a4000 9a0 mc! - -84800000 500 mc! - -10000 0 DO LOOP - -80000000 b0 mc! BEGIN b0 mc@ 40000000 and UNTIL - -0 300 mc! 0 310 mc! - -80000000 440 mc! -0 410 mc! 27fffffc 420 mc! -fedcba98 430 mc! -c0000000 400 mc! BEGIN 400 mc@ c0000000 and 0= UNTIL - -cr .( mem done) diff --git a/qemu/roms/SLOF/board-js2x/slof/version.c b/qemu/roms/SLOF/board-js2x/slof/version.c deleted file mode 100644 index e69de29bb..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/version.c +++ /dev/null diff --git a/qemu/roms/SLOF/board-js2x/slof/vga-display.fs b/qemu/roms/SLOF/board-js2x/slof/vga-display.fs deleted file mode 100644 index 96417e2d3..000000000 --- a/qemu/roms/SLOF/board-js2x/slof/vga-display.fs +++ /dev/null @@ -1,157 +0,0 @@ -\ ***************************************************************************** -\ * Copyright (c) 2004, 2008 IBM Corporation -\ * All rights reserved. -\ * This program and the accompanying materials -\ * are made available under the terms of the BSD License -\ * which accompanies this distribution, and is available at -\ * http://www.opensource.org/licenses/bsd-license.php -\ * -\ * Contributors: -\ * IBM Corporation - initial implementation -\ ****************************************************************************/ - -\ included by pci-class_03.fs - -( str len display_num ) \ name prefix - -false value is-installed? -value display_num ( str len ) - -s" ,Display-" $cat 41 display_num + char-cat \ add ", Display-A" or "-B" to name ( str len ) -encode-string s" name" property \ store as name property - -s" display" device-type - -\ screen-info is set by pci-class_03.fs contains output of get_vbe_info bios-snk call -CASE screen-info c@ \ ( display-type ) - 0 OF s" NONE" ENDOF \ No display - 1 OF s" Analog" ENDOF - 2 OF s" Digital" ENDOF -ENDCASE -encode-string s" display-type" property - -screen-info 8 + l@ value mem-adr -screen-info 1 + w@ value width -screen-info 3 + w@ value height - -screen-info c@ IF - \ if screen-info is not 0, we have some screen attached, add needed properties... - width encode-int s" width" property - height encode-int s" height" property - screen-info 5 + w@ encode-int s" linebytes" property - screen-info 7 + c@ encode-int s" depth" property - mem-adr encode-int s" address" property - \ the EDID property breaks the boot... so i leave it out for now, - \ maybe encode-bytes does s.th. wrong??? - \ screen-info c + 80 encode-bytes s" EDID" property - s" ISO8859-1" encode-string s" character-set" property \ i hope this is ok... -THEN - -\ words for installation/removal, needed by is-install/is-remove, see display.fs -: display-remove ( -- ) -; -: display-install ( -- ) - is-installed? NOT IF - mem-adr to frame-buffer-adr - default-font - set-font - width height width char-width / height char-height / ( width height #lines #cols ) - fb8-install - true to is-installed? - THEN -; - -: color! ( r g b number -- ) - \ 3c8 is RAMDAC write mode select palette entry register - \ 3c9 is RAMDAC write mode write palette entry register ( 3 consecutive writes set new entry ) - vga-device-node? 3c8 translate-address ( r g b number address ) - swap 1 pick ( r g b address number address ) - rb! \ write palette entry number ( r g b address ) - 1 + \ select next register (3c9) - dup 4 pick swap rb! \ write red ( r g b address ) - dup 3 pick swap rb! \ write green ( r g b address ) - dup 2 pick swap rb! \ write blue ( r g b address ) - 4drop -; - -: color@ ( number -- r g b ) - \ 3c7 is RAMDAC read mode select palette entry register - \ 3c9 is RAMDAC read mode read palette entry register ( 3 consecutive reads read entry ) - vga-device-node? 3c7 translate-address ( number address ) - swap 1 pick ( address number address ) - rb! \ write palette entry number ( address ) - 2 + >r \ select next register (3c9) ( R: address ) - r@ rb@ \ read red ( r R: address ) - r@ rb@ \ read green ( r g R: address ) - r@ rb@ \ write blue ( r g b R: address ) - r> drop ( r g b ) -; - -: set-colors ( adr number #numbers -- ) - \ 3c8 is RAMDAC write mode select palette entry register - \ 3c9 is RAMDAC write mode write palette entry register ( 3 consecutive writes set new entry ) - \ since after writing 3 entries, the palette entry is automagically incremented, - \ we can just continue writing... - vga-device-node? 3c8 translate-address ( adr number #numbers ) - dup 3 pick swap ( adr number #numbers address number address ) - rb! \ write palette entry number ( adr number #numbers address ) - 1 + \ select next register (3c9) - -rot swap drop ( adr address #numbers ) - -rot swap rot ( address adr #numbers ) - 0 ?DO - ( address adr ) - dup rb@ \ read red value from adr ( address adr r ) - 2 pick rb! \ write to register ( address adr ) - 1 + \ next adr - dup rb@ \ read green value from adr ( address adr g ) - 2 pick rb! \ write to register ( address adr ) - 1 + \ next adr - dup rb@ \ read blue value from adr ( address adr r ) - 2 pick rb! \ write to register ( address adr ) - 1 + \ next adr - LOOP - 2drop -; - -: get-colors ( adr number #numbers -- ) - \ 3c7 is RAMDAC read mode select palette entry register - \ 3c9 is RAMDAC read mode read palette entry register ( 3 consecutive reads get entry ) - \ since after reading 3 entries, the palette entry is automagically incremented, - \ we can just continue reading... - vga-device-node? 3c7 translate-address ( adr number #numbers ) - dup 3 pick swap ( adr number #numbers address number address ) - rb! \ write palette entry number ( adr number #numbers address ) - 2 + \ select next register (3c9) - -rot swap drop ( adr address #numbers ) - -rot swap rot ( address adr #numbers ) - 0 ?DO - ( address adr ) - 1 pick rb@ \ read red value from register ( address adr r ) - 1 pick rb! \ write to adr ( address adr ) - 1 + \ next adr - 1 pick rb@ \ read green value from register ( address adr g ) - 1 pick rb! \ write to adr ( address adr ) - 1 + \ next adr - 1 pick rb@ \ read blue value from register ( address adr b ) - 1 pick rb! \ write to adr ( address adr ) - 1 + \ next adr - LOOP - 2drop -; - -include graphics.fs - -\ clear screen -mem-adr width height * 0 rfill - -\ call is-install and is-remove -' display-install is-install - -' display-remove is-remove - -s" screen" find-alias 0= IF - \ no previous screen alias defined, define it... - s" screen" get-node node>path set-alias -ELSE - drop -THEN |