These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 49 deletions

diff --git a/kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt b/kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt
deleted file mode 100644
index f522bb8e4..000000000
--- a/kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Sharp Microelectronics 10.1" WQXGA TFT LCD panel
-
-This panel requires a dual-channel DSI host to operate. It supports two modes:
-- left-right: each channel drives the left or right half of the screen
-- even-odd: each channel drives the even or odd lines of the screen
-
-Each of the DSI channels controls a separate DSI peripheral. The peripheral
-driven by the first link (DSI-LINK1), left or even, is considered the primary
-peripheral and controls the device. The 'link2' property contains a phandle
-to the peripheral driven by the second link (DSI-LINK2, right or odd).
-
-Note that in video mode the DSI-LINK1 interface always provides the left/even
-pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
-is possible to program either link to drive the left/even or right/odd pixels
-but for the sake of consistency this binding assumes that the same assignment
-is chosen as for video mode.
-
-Required properties:
-- compatible: should be "sharp,lq101r1sx01"
-- reg: DSI virtual channel of the peripheral
-
-Required properties (for DSI-LINK1 only):
-- link2: phandle to the DSI peripheral on the secondary link. Note that the
-  presence of this property marks the containing node as DSI-LINK1.
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties (for DSI-LINK1 only):
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
-	dsi@54300000 {
-		panel: panel@0 {
-			compatible = "sharp,lq101r1sx01";
-			reg = <0>;
-
-			link2 = <&secondary>;
-
-			power-supply = <...>;
-			backlight = <...>;
-		};
-	};
-
-	dsi@54400000 {
-		secondary: panel@0 {
-			compatible = "sharp,lq101r1sx01";
-			reg = <0>;
-		};
-	};