diff options
| author |   José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-11 10:41:07 +0300 |
|---|---|---|
| committer | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-13 08:17:18 +0300 |
| commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
| tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/Documentation/devicetree | |
| parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) | |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/Documentation/devicetree')
724 files changed, 17545 insertions, 1220 deletions
diff --git a/kernel/Documentation/devicetree/bindings/arc/archs-pct.txt b/kernel/Documentation/devicetree/bindings/arc/archs-pct.txt new file mode 100644 index 000000000..1ae98b87c --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arc/archs-pct.txt @@ -0,0 +1,17 @@ +* ARC HS Performance Counters + +The ARC HS can be configured with a pipeline performance monitor for counting +CPU and cache events like cache misses and hits. Like conventional PCT there +are 100+ hardware conditions dynamically mapped to upto 32 counters. +It also supports overflow interrupts. + +Required properties: + +- compatible : should contain + "snps,archs-pct" + +Example: + +pmu { + compatible = "snps,archs-pct"; +}; diff --git a/kernel/Documentation/devicetree/bindings/arc/axs101.txt b/kernel/Documentation/devicetree/bindings/arc/axs101.txt new file mode 100644 index 000000000..48290d517 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arc/axs101.txt @@ -0,0 +1,7 @@ +Synopsys DesignWare ARC Software Development Platforms Device Tree Bindings +--------------------------------------------------------------------------- + +SDP Main Board with an AXC001 CPU Card hoisting ARC700 core in silicon + +Required root node properties: + - compatible = "snps,axs101", "snps,arc-sdp"; diff --git a/kernel/Documentation/devicetree/bindings/arc/axs103.txt b/kernel/Documentation/devicetree/bindings/arc/axs103.txt new file mode 100644 index 000000000..6eea862e7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arc/axs103.txt @@ -0,0 +1,8 @@ +Synopsys DesignWare ARC Software Development Platforms Device Tree Bindings +--------------------------------------------------------------------------- + +SDP Main Board with an AXC003 FPGA Card which can contain various flavours of +HS38x cores. + +Required root node properties: + - compatible = "snps,axs103", "snps,arc-sdp"; diff --git a/kernel/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt b/kernel/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt new file mode 100644 index 000000000..77ca63576 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt @@ -0,0 +1,12 @@ +Altera SOCFPGA SDRAM Controller + +Required properties: +- compatible : Should contain "altr,sdr-ctl" and "syscon". + syscon is required by the Altera SOCFPGA SDRAM EDAC. +- reg : Should contain 1 register range (address and length) + +Example: + sdr: sdr@ffc25000 { + compatible = "altr,sdr-ctl", "syscon"; + reg = <0xffc25000 0x1000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/kernel/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt index d0ce01da5..f5ad0ff69 100644 --- a/kernel/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt +++ b/kernel/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt @@ -2,7 +2,7 @@ Altera SOCFPGA SDRAM Error Detection & Correction [EDAC] The EDAC accesses a range of registers in the SDRAM controller. Required properties: -- compatible : should contain "altr,sdram-edac"; +- compatible : should contain "altr,sdram-edac" or "altr,sdram-edac-a10" - altr,sdr-syscon : phandle of the sdr module - interrupts : Should contain the SDRAM ECC IRQ in the appropriate format for the IRQ controller. diff --git a/kernel/Documentation/devicetree/bindings/arm/amlogic.txt b/kernel/Documentation/devicetree/bindings/arm/amlogic.txt index 973884a1b..1dfee20ee 100644 --- a/kernel/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/kernel/Documentation/devicetree/bindings/arm/amlogic.txt @@ -9,6 +9,12 @@ Boards with the Amlogic Meson8 SoC shall have the following properties: Required root node property: compatible: "amlogic,meson8"; +Boards with the Amlogic Meson8b SoC shall have the following properties: + Required root node property: + compatible: "amlogic,meson8b"; + Board compatible values: - - "geniatech,atv1200" - - "minix,neo-x8" + - "geniatech,atv1200" (Meson6) + - "minix,neo-x8" (Meson8) + - "tronfy,mxq" (Meson8b) + - "hardkernel,odroid-c1" (Meson8b) diff --git a/kernel/Documentation/devicetree/bindings/arm/apm/scu.txt b/kernel/Documentation/devicetree/bindings/arm/apm/scu.txt new file mode 100644 index 000000000..b45be0662 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/apm/scu.txt @@ -0,0 +1,17 @@ +APM X-GENE SoC series SCU Registers + +This system clock unit contain various register that control block resets, +clock enable/disables, clock divisors and other deepsleep registers. + +Properties: + - compatible : should contain two values. First value must be: + - "apm,xgene-scu" + second value must be always "syscon". + + - reg : offset and length of the register set. + +Example : + scu: system-clk-controller@17000000 { + compatible = "apm,xgene-scu","syscon"; + reg = <0x0 0x17000000 0x0 0x400>; + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/arm,scpi.txt b/kernel/Documentation/devicetree/bindings/arm/arm,scpi.txt new file mode 100644 index 000000000..86302de67 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -0,0 +1,188 @@ +System Control and Power Interface (SCPI) Message Protocol +---------------------------------------------------------- + +Firmware implementing the SCPI described in ARM document number ARM DUI 0922B +("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be used +by Linux to initiate various system control and power operations. + +Required properties: + +- compatible : should be "arm,scpi" +- mboxes: List of phandle and mailbox channel specifiers + All the channels reserved by remote SCP firmware for use by + SCPI message protocol should be specified in any order +- shmem : List of phandle pointing to the shared memory(SHM) area between the + processors using these mailboxes for IPC, one for each mailbox + SHM can be any memory reserved for the purpose of this communication + between the processors. + +See Documentation/devicetree/bindings/mailbox/mailbox.txt +for more details about the generic mailbox controller and +client driver bindings. + +Clock bindings for the clocks based on SCPI Message Protocol +------------------------------------------------------------ + +This binding uses the common clock binding[1]. + +Container Node +============== +Required properties: +- compatible : should be "arm,scpi-clocks" + All the clocks provided by SCP firmware via SCPI message + protocol much be listed as sub-nodes under this node. + +Sub-nodes +========= +Required properties: +- compatible : shall include one of the following + "arm,scpi-dvfs-clocks" - all the clocks that are variable and index based. + These clocks don't provide an entire range of values between the + limits but only discrete points within the range. The firmware + provides the mapping for each such operating frequency and the + index associated with it. The firmware also manages the + voltage scaling appropriately with the clock scaling. + "arm,scpi-variable-clocks" - all the clocks that are variable and provide full + range within the specified range. The firmware provides the + range of values within a specified range. + +Other required properties for all clocks(all from common clock binding): +- #clock-cells : Should be 1. Contains the Clock ID value used by SCPI commands. +- clock-output-names : shall be the corresponding names of the outputs. +- clock-indices: The identifying number for the clocks(i.e.clock_id) in the + node. It can be non linear and hence provide the mapping of identifiers + into the clock-output-names array. + +SRAM and Shared Memory for SCPI +------------------------------- + +A small area of SRAM is reserved for SCPI communication between application +processors and SCP. + +Required properties: +- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno + +The rest of the properties should follow the generic mmio-sram description +found in ../../misc/sysram.txt + +Each sub-node represents the reserved area for SCPI. + +Required sub-node properties: +- reg : The base offset and size of the reserved area with the SRAM +- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based + shared memory on Juno platforms + +Sensor bindings for the sensors based on SCPI Message Protocol +-------------------------------------------------------------- +SCPI provides an API to access the various sensors on the SoC. + +Required properties: +- compatible : should be "arm,scpi-sensors". +- #thermal-sensor-cells: should be set to 1. This property follows the + thermal device tree bindings[2]. + + Valid cell values are raw identifiers (Sensor + ID) as used by the firmware. Refer to + platform documentation for your + implementation for the IDs to use. For Juno + R0 and Juno R1 refer to [3]. + +[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/thermal/thermal.txt +[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html + +Example: + +sram: sram@50000000 { + compatible = "arm,juno-sram-ns", "mmio-sram"; + reg = <0x0 0x50000000 0x0 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x50000000 0x10000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "arm,juno-scp-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "arm,juno-scp-shmem"; + reg = <0x200 0x200>; + }; +}; + +mailbox: mailbox0@40000000 { + .... + #mbox-cells = <1>; +}; + +scpi_protocol: scpi@2e000000 { + compatible = "arm,scpi"; + mboxes = <&mailbox 0 &mailbox 1>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; + + clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: scpi_clocks@0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>, <1>, <2>; + clock-output-names = "atlclk", "aplclk","gpuclk"; + }; + scpi_clk: scpi_clocks@3 { + compatible = "arm,scpi-variable-clocks"; + #clock-cells = <1>; + clock-indices = <3>, <4>; + clock-output-names = "pxlclk0", "pxlclk1"; + }; + }; + + scpi_sensors0: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; +}; + +cpu@0 { + ... + reg = <0 0>; + clocks = <&scpi_dvfs 0>; +}; + +hdlcd@7ff60000 { + ... + reg = <0 0x7ff60000 0 0x1000>; + clocks = <&scpi_clk 4>; +}; + +thermal-zones { + soc_thermal { + polling-delay-passive = <100>; + polling-delay = <1000>; + + /* sensor ID */ + thermal-sensors = <&scpi_sensors0 3>; + ... + }; +}; + +In the above example, the #clock-cells is set to 1 as required. +scpi_dvfs has 3 output clocks namely: atlclk, aplclk, and gpuclk with 0, +1 and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0 +and pxlclk1 with 3 and 4 as clock-indices. + +The first consumer in the example is cpu@0 and it has '0' as the clock +specifier which points to the first entry in the output clocks of +scpi_dvfs i.e. "atlclk". + +Similarly the second example is hdlcd@7ff60000 and it has pxlclk1 as input +clock. '4' in the clock specifier here points to the second entry +in the output clocks of scpi_clocks i.e. "pxlclk1" + +The thermal-sensors property in the soc_thermal node uses the +temperature sensor provided by SCP firmware to setup a thermal +zone. The ID "3" is the sensor identifier for the temperature sensor +as used by the firmware. diff --git a/kernel/Documentation/devicetree/bindings/arm/arm-boards b/kernel/Documentation/devicetree/bindings/arm/arm-boards index b78564b2b..1a709970e 100644 --- a/kernel/Documentation/devicetree/bindings/arm/arm-boards +++ b/kernel/Documentation/devicetree/bindings/arm/arm-boards @@ -157,3 +157,69 @@ Example: }; }; + +ARM Versatile Express Boards +----------------------------- +For details on the device tree bindings for ARM Versatile Express boards +please consult the vexpress.txt file in the same directory as this file. + +ARM Juno Boards +---------------- +The Juno boards are targeting development for AArch64 systems. The first +iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64, +with the second iteration, Juno r1, mainly aimed at development of PCIe +based systems. Juno r1 also has support for AXI masters placed on the TLX +connectors to join the coherency domain. + +Juno boards are described in a similar way to ARM Versatile Express boards, +with the motherboard part of the hardware being described in a separate file +to highlight the fact that is part of the support infrastructure for the SoC. +Juno device tree bindings also share the Versatile Express bindings as +described under the RS1 memory mapping. + +Required properties (in root node): + compatible = "arm,juno"; /* For Juno r0 board */ + compatible = "arm,juno-r1"; /* For Juno r1 board */ + +Required nodes: +The description for the board must include: + - a "psci" node describing the boot method used for the secondary CPUs. + A detailed description of the bindings used for "psci" nodes is present + in the psci.txt file. + - a "cpus" node describing the available cores and their associated + "enable-method"s. For more details see cpus.txt file. + +Example: + +/dts-v1/; +/ { + model = "ARM Juno development board (r0)"; + compatible = "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + A57_0: cpu@0 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + }; + + ..... + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + }; + + ..... + }; + +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/armv7m_systick.txt b/kernel/Documentation/devicetree/bindings/arm/armv7m_systick.txt new file mode 100644 index 000000000..7cf4a2460 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/armv7m_systick.txt @@ -0,0 +1,26 @@ +* ARMv7M System Timer + +ARMv7-M includes a system timer, known as SysTick. Current driver only +implements the clocksource feature. + +Required properties: +- compatible : Should be "arm,armv7m-systick" +- reg : The address range of the timer + +Required clocking property, have to be one of: +- clocks : The input clock of the timer +- clock-frequency : The rate in HZ in input of the ARM SysTick + +Examples: + +systick: timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + clocks = <&clk_systick>; +}; + +systick: timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + clock-frequency = <90000000>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/atmel-at91.txt b/kernel/Documentation/devicetree/bindings/arm/atmel-at91.txt index 2e99b5b57..7fd64ec9e 100644 --- a/kernel/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/kernel/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -27,6 +27,8 @@ compatible: must be one of: o "atmel,at91sam9xe" * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific SoC family: + o "atmel,sama5d2" shall be extended with the specific SoC compatible: + - "atmel,sama5d27" o "atmel,sama5d3" shall be extended with the specific SoC compatible: - "atmel,sama5d31" - "atmel,sama5d33" @@ -50,6 +52,7 @@ System Timer (ST) required properties: - reg: Should contain registers location and length - interrupts: Should contain interrupt for the ST which is the IRQ line shared across all System Controller members. +- clocks: phandle to input clock. Its subnodes can be: - watchdog: compatible should be "atmel,at91rm9200-wdt" @@ -61,7 +64,7 @@ TC/TCLIB Timer required properties: Note that you can specify several interrupt cells if the TC block has one interrupt per channel. - clock-names: tuple listing input clock names. - Required elements: "t0_clk" + Required elements: "t0_clk", "slow_clk" Optional elements: "t1_clk", "t2_clk" - clocks: phandles to input clocks. @@ -87,18 +90,20 @@ One interrupt per TC channel in a TC block: RSTC Reset Controller required properties: - compatible: Should be "atmel,<chip>-rstc". - <chip> can be "at91sam9260" or "at91sam9g45" + <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3" - reg: Should contain registers location and length +- clocks: phandle to input clock. Example: rstc@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; + clocks = <&clk32k>; }; RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91rm9200-sdramc", +- compatible: Should be "atmel,at91rm9200-sdramc", "syscon" "atmel,at91sam9260-sdramc", "atmel,at91sam9g45-ddramc", "atmel,sama5d3-ddramc", @@ -117,6 +122,7 @@ required properties: - compatible: Should be "atmel,<chip>-shdwc". <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5". - reg: Should contain registers location and length +- clocks: phandle to input clock. optional properties: - atmel,wakeup-mode: String, operation mode of the wakeup mode. @@ -135,9 +141,10 @@ optional at91sam9x5 properties: Example: - rstc@fffffd00 { - compatible = "atmel,at91sam9260-rstc"; - reg = <0xfffffd00 0x10>; + shdwc@fffffd10 { + compatible = "atmel,at91sam9260-shdwc"; + reg = <0xfffffd10 0x10>; + clocks = <&clk32k>; }; Special Function Registers (SFR) diff --git a/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt index ac683480c..c78576bb7 100644 --- a/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +++ b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt @@ -1,8 +1,35 @@ Broadcom BCM2835 device tree bindings ------------------------------------------- -Boards with the BCM2835 SoC shall have the following properties: +Raspberry Pi Model A +Required root node properties: +compatible = "raspberrypi,model-a", "brcm,bcm2835"; -Required root node property: +Raspberry Pi Model A+ +Required root node properties: +compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; +Raspberry Pi Model B +Required root node properties: +compatible = "raspberrypi,model-b", "brcm,bcm2835"; + +Raspberry Pi Model B (no P5) +early model B with I2C0 rather than I2C1 routed to the expansion header +Required root node properties: +compatible = "raspberrypi,model-b-i2c0", "brcm,bcm2835"; + +Raspberry Pi Model B rev2 +Required root node properties: +compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; + +Raspberry Pi Model B+ +Required root node properties: +compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; + +Raspberry Pi Compute Module +Required root node properties: +compatible = "raspberrypi,compute-module", "brcm,bcm2835"; + +Generic BCM2835 board +Required root node properties: compatible = "brcm,bcm2835"; diff --git a/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt index bd49987a8..b82b6a0ae 100644 --- a/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt +++ b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt @@ -7,3 +7,79 @@ following properties: Required root node property: compatible: should be "brcm,bcm63138" + +An optional Boot lookup table Device Tree node is required for secondary CPU +initialization as well as a 'resets' phandle to the correct PMB controller as +defined in reset/brcm,bcm63138-pmb.txt for this secondary CPU, and an +'enable-method' property. + +Required properties for the Boot lookup table node: +- compatible: should be "brcm,bcm63138-bootlut" +- reg: register base address and length for the Boot Lookup table + +Optional properties for the primary CPU node: +- enable-method: should be "brcm,bcm63138" + +Optional properties for the secondary CPU node: +- enable-method: should be "brcm,bcm63138" +- resets: phandle to the relevant PMB controller, one integer indicating the internal + bus number, and a second integer indicating the address of the CPU in the PMB + internal bus number. + +Example: + + cpus { + cpu@0 { + compatible = "arm,cotex-a9"; + reg = <0>; + ... + enable-method = "brcm,bcm63138"; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + ... + enable-method = "brcm,bcm63138"; + resets = <&pmb0 4 1>; + }; + }; + + bootlut: bootlut@8000 { + compatible = "brcm,bcm63138-bootlut"; + reg = <0x8000 0x50>; + }; + +======= +reboot +------ +Two nodes are required for software reboot: a timer node and a syscon-reboot node. + +Timer node: + +- compatible: Must be "brcm,bcm6328-timer", "syscon" +- reg: Register base address and length + +Syscon reboot node: + +See Documentation/devicetree/bindings/power/reset/syscon-reboot.txt for the +detailed list of properties, the two values defined below are specific to the +BCM6328-style timer: + +- offset: Should be 0x34 to denote the offset of the TIMER_WD_TIMER_RESET register + from the beginning of the TIMER block +- mask: Should be 1 for the SoftRst bit. + +Example: + + timer: timer@80 { + compatible = "brcm,bcm6328-timer", "syscon"; + reg = <0x80 0x3c>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <0x1>; + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt index 430608ec0..0d0c1ae81 100644 --- a/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt +++ b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -20,6 +20,25 @@ system control is required: - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon" - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon" +hif-cpubiuctrl node +------------------- +SoCs with Broadcom Brahma15 ARM-based CPUs have a specific Bus Interface Unit +(BIU) block which controls and interfaces the CPU complex to the different +Memory Controller Ports (MCP), one per memory controller (MEMC). This BIU block +offers a feature called Write Pairing which consists in collapsing two adjacent +cache lines into a single (bursted) write transaction towards the memory +controller (MEMC) to maximize write bandwidth. + +Required properties: + + - compatible: must be "brcm,bcm7445-hif-cpubiuctrl", "syscon" + +Optional properties: + + - brcm,write-pairing: + Boolean property, which when present indicates that the chip + supports write-pairing. + example: rdb { #address-cells = <1>; @@ -35,6 +54,7 @@ example: hif_cpubiuctrl: syscon@3e2400 { compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon"; reg = <0x3e2400 0x5b4>; + brcm,write-pairing; }; hif_continuation: syscon@452000 { @@ -43,8 +63,7 @@ example: }; }; -Lastly, nodes that allow for support of SMP initialization and reboot are -required: +Nodes that allow for support of SMP initialization and reboot are required: smpboot ------- @@ -95,3 +114,142 @@ example: compatible = "brcm,brcmstb-reboot"; syscon = <&sun_top_ctrl 0x304 0x308>; }; + + + +Power management +---------------- + +For power management (particularly, S2/S3/S5 system suspend), the following SoC +components are needed: + += Always-On control block (AON CTRL) + +This hardware provides control registers for the "always-on" (even in low-power +modes) hardware, such as the Power Management State Machine (PMSM). + +Required properties: +- compatible : should contain "brcm,brcmstb-aon-ctrl" +- reg : the register start and length for the AON CTRL block + +Example: + +aon-ctrl@410000 { + compatible = "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x400>; +}; + += Memory controllers + +A Broadcom STB SoC typically has a number of independent memory controllers, +each of which may have several associated hardware blocks, which are versioned +independently (control registers, DDR PHYs, etc.). One might consider +describing these controllers as a parent "memory controllers" block, which +contains N sub-nodes (one for each controller in the system), each of which is +associated with a number of hardware register resources (e.g., its PHY). See +the example device tree snippet below. + +== MEMC (MEMory Controller) + +Represents a single memory controller instance. + +Required properties: +- compatible : should contain "brcm,brcmstb-memc" and "simple-bus" + +Should contain subnodes for any of the following relevant hardware resources: + +== DDR PHY control + +Control registers for this memory controller's DDR PHY. + +Required properties: +- compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v225.1" + "brcm,brcmstb-ddr-phy-v240.1" + "brcm,brcmstb-ddr-phy-v240.2" + +- reg : the DDR PHY register range + +== DDR SHIMPHY + +Control registers for this memory controller's DDR SHIMPHY. + +Required properties: +- compatible : should contain "brcm,brcmstb-ddr-shimphy-v1.0" +- reg : the DDR SHIMPHY register range + +== MEMC DDR control + +Sequencer DRAM parameters and control registers. Used for Self-Refresh +Power-Down (SRPD), among other things. + +Required properties: +- compatible : should contain "brcm,brcmstb-memc-ddr" +- reg : the MEMC DDR register range + +Example: + +memory_controllers { + ranges; + compatible = "simple-bus"; + + memc@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges; + + ddr-phy@f1106000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0xf1106000 0x21c>; + }; + + shimphy@f1108000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0xf1108000 0xe4>; + }; + + memc-ddr@f1102000 { + reg = <0xf1102000 0x800>; + compatible = "brcm,brcmstb-memc-ddr"; + }; + }; + + memc@1 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges; + + ddr-phy@f1186000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0xf1186000 0x21c>; + }; + + shimphy@f1188000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0xf1188000 0xe4>; + }; + + memc-ddr@f1182000 { + reg = <0xf1182000 0x800>; + compatible = "brcm,brcmstb-memc-ddr"; + }; + }; + + memc@2 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges; + + ddr-phy@f1206000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0xf1206000 0x21c>; + }; + + shimphy@f1208000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0xf1208000 0xe4>; + }; + + memc-ddr@f1202000 { + reg = <0xf1202000 0x800>; + compatible = "brcm,brcmstb-memc-ddr"; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt new file mode 100644 index 000000000..eae53e455 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.txt @@ -0,0 +1,34 @@ +Broadcom Northstar Plus device tree bindings +-------------------------------------------- + +Broadcom Northstar Plus family of SoCs are used for switching control +and management applications as well as residential router/gateway +applications. The SoC features dual core Cortex A9 ARM CPUs, integrating +several peripheral interfaces including multiple Gigabit Ethernet PHYs, +DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash, +SATA and several other IO controllers. + +Boards with Northstar Plus SoCs shall have the following properties: + +Required root node property: + +BCM58522 +compatible = "brcm,bcm58522", "brcm,nsp"; + +BCM58525 +compatible = "brcm,bcm58525", "brcm,nsp"; + +BCM58535 +compatible = "brcm,bcm58535", "brcm,nsp"; + +BCM58622 +compatible = "brcm,bcm58622", "brcm,nsp"; + +BCM58623 +compatible = "brcm,bcm58623", "brcm,nsp"; + +BCM58625 +compatible = "brcm,bcm58625", "brcm,nsp"; + +BCM88312 +compatible = "brcm,bcm88312", "brcm,nsp"; diff --git a/kernel/Documentation/devicetree/bindings/arm/bcm/ns2.txt b/kernel/Documentation/devicetree/bindings/arm/bcm/ns2.txt new file mode 100644 index 000000000..35f056f4a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/bcm/ns2.txt @@ -0,0 +1,9 @@ +Broadcom North Star 2 (NS2) device tree bindings +------------------------------------------------ + +Boards with NS2 shall have the following properties: + +Required root node property: + +NS2 SVK board +compatible = "brcm,ns2-svk", "brcm,ns2"; diff --git a/kernel/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt b/kernel/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt new file mode 100644 index 000000000..6824b3180 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt @@ -0,0 +1,14 @@ +Raspberry Pi VideoCore firmware driver + +Required properties: + +- compatible: Should be "raspberrypi,bcm2835-firmware" +- mboxes: Phandle to the firmware device's Mailbox. + (See: ../mailbox/mailbox.txt for more information) + +Example: + +firmware { + compatible = "raspberrypi,bcm2835-firmware"; + mboxes = <&mailbox>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/cci.txt b/kernel/Documentation/devicetree/bindings/arm/cci.txt index 3c5c63132..aef1d200a 100644 --- a/kernel/Documentation/devicetree/bindings/arm/cci.txt +++ b/kernel/Documentation/devicetree/bindings/arm/cci.txt @@ -31,8 +31,9 @@ specific to ARM. - compatible Usage: required Value type: <string> - Definition: must be set to + Definition: must contain one of the following: "arm,cci-400" + "arm,cci-500" - reg Usage: required @@ -99,6 +100,7 @@ specific to ARM. "arm,cci-400-pmu,r1" "arm,cci-400-pmu" - DEPRECATED, permitted only where OS has secure acces to CCI registers + "arm,cci-500-pmu,r0" - reg: Usage: required Value type: Integer cells. A register entry, expressed diff --git a/kernel/Documentation/devicetree/bindings/arm/coherency-fabric.txt b/kernel/Documentation/devicetree/bindings/arm/coherency-fabric.txt index 8dd46617c..9b5c3f620 100644 --- a/kernel/Documentation/devicetree/bindings/arm/coherency-fabric.txt +++ b/kernel/Documentation/devicetree/bindings/arm/coherency-fabric.txt @@ -27,6 +27,11 @@ Required properties: * For "marvell,armada-380-coherency-fabric", only one pair is needed for the per-CPU fabric registers. +Optional properties: + +- broken-idle: boolean to set when the Idle mode is not supported by the + hardware. + Examples: coherency-fabric@d0020200 { diff --git a/kernel/Documentation/devicetree/bindings/arm/coresight.txt b/kernel/Documentation/devicetree/bindings/arm/coresight.txt index 88602b754..62938eb96 100644 --- a/kernel/Documentation/devicetree/bindings/arm/coresight.txt +++ b/kernel/Documentation/devicetree/bindings/arm/coresight.txt @@ -17,15 +17,20 @@ its hardware characteristcs. - "arm,coresight-tmc", "arm,primecell"; - "arm,coresight-funnel", "arm,primecell"; - "arm,coresight-etm3x", "arm,primecell"; + - "arm,coresight-etm4x", "arm,primecell"; + - "qcom,coresight-replicator1x", "arm,primecell"; * reg: physical base address and length of the register set(s) of the component. - * clocks: the clock associated to this component. + * clocks: the clocks associated to this component. - * clock-names: the name of the clock as referenced by the code. - Since we are using the AMBA framework, the name should be - "apb_pclk". + * clock-names: the name of the clocks referenced by the code. + Since we are using the AMBA framework, the name of the clock + providing the interconnect should be "apb_pclk", and some + coresight blocks also have an additional clock "atclk", which + clocks the core of that coresight component. The latter clock + is optional. * port or ports: The representation of the component's port layout using the generic DT graph presentation found in diff --git a/kernel/Documentation/devicetree/bindings/arm/cpus.txt b/kernel/Documentation/devicetree/bindings/arm/cpus.txt index 6aa331d11..3a07a87fe 100644 --- a/kernel/Documentation/devicetree/bindings/arm/cpus.txt +++ b/kernel/Documentation/devicetree/bindings/arm/cpus.txt @@ -188,16 +188,20 @@ nodes to be present and contain the properties described below. # On ARM 32-bit systems this property is optional and can be one of: "allwinner,sun6i-a31" + "allwinner,sun8i-a23" "arm,psci" "brcm,brahma-b15" "marvell,armada-375-smp" "marvell,armada-380-smp" "marvell,armada-390-smp" "marvell,armada-xp-smp" + "mediatek,mt6589-smp" + "mediatek,mt81xx-tz-smp" "qcom,gcc-msm8660" "qcom,kpss-acc-v1" "qcom,kpss-acc-v2" "rockchip,rk3066-smp" + "ste,dbx500-smp" - cpu-release-addr Usage: required for systems that have an "enable-method" diff --git a/kernel/Documentation/devicetree/bindings/arm/fsl.txt b/kernel/Documentation/devicetree/bindings/arm/fsl.txt index a5462b6b3..34c88b0c7 100644 --- a/kernel/Documentation/devicetree/bindings/arm/fsl.txt +++ b/kernel/Documentation/devicetree/bindings/arm/fsl.txt @@ -81,12 +81,15 @@ Freescale Vybrid Platform Device Tree Bindings For the Vybrid SoC familiy all variants with DDR controller are supported, which is the VF5xx and VF6xx series. Out of historical reasons, in most places the kernel uses vf610 to refer to the whole familiy. +The compatible string "fsl,vf610m4" is used for the secondary Cortex-M4 +core support. Required root node compatible property (one of them): - compatible = "fsl,vf500"; - compatible = "fsl,vf510"; - compatible = "fsl,vf600"; - compatible = "fsl,vf610"; + - compatible = "fsl,vf610m4"; Freescale LS1021A Platform Device Tree Bindings ------------------------------------------------ @@ -125,10 +128,18 @@ Example: reg = <0x0 0x1ee0000 0x0 0x10000>; }; -Freescale LS2085A SoC Device Tree Bindings ------------------------------------------- +Freescale ARMv8 based Layerscape SoC family Device Tree Bindings +---------------------------------------------------------------- -LS2085A ARMv8 based Simulator model +LS2080A ARMv8 based Simulator model Required root node properties: - - compatible = "fsl,ls2085a-simu", "fsl,ls2085a"; + - compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; + +LS2080A ARMv8 based QDS Board +Required root node properties: + - compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; + +LS2080A ARMv8 based RDB Board +Required root node properties: + - compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; diff --git a/kernel/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/kernel/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 35b1bd49c..6ac7c000a 100644 --- a/kernel/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/kernel/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -1,5 +1,8 @@ Hisilicon Platforms Device Tree Bindings ---------------------------------------------------- +Hi6220 SoC +Required root node properties: + - compatible = "hisilicon,hi6220"; Hi4511 Board Required root node properties: @@ -13,6 +16,13 @@ HiP01 ca9x2 Board Required root node properties: - compatible = "hisilicon,hip01-ca9x2"; +HiKey Board +Required root node properties: + - compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; + +HiP05 D02 Board +Required root node properties: + - compatible = "hisilicon,hip05-d02"; Hisilicon system controller @@ -41,6 +51,105 @@ Example: }; ----------------------------------------------------------------------- +Hisilicon Hi6220 system controller + +Required properties: +- compatible : "hisilicon,hi6220-sysctrl" +- reg : Register address and size +- #clock-cells: should be set to 1, many clock registers are defined + under this controller and this property must be present. + +Hisilicon designs this controller as one of the system controllers, +its main functions are the same as Hisilicon system controller, but +the register offset of some core modules are different. + +Example: + /*for Hi6220*/ + sys_ctrl: sys_ctrl@f7030000 { + compatible = "hisilicon,hi6220-sysctrl", "syscon"; + reg = <0x0 0xf7030000 0x0 0x2000>; + #clock-cells = <1>; + }; + + +Hisilicon Hi6220 Power Always ON domain controller + +Required properties: +- compatible : "hisilicon,hi6220-aoctrl" +- reg : Register address and size +- #clock-cells: should be set to 1, many clock registers are defined + under this controller and this property must be present. + +Hisilicon designs this system controller to control the power always +on domain for mobile platform. + +Example: + /*for Hi6220*/ + ao_ctrl: ao_ctrl@f7800000 { + compatible = "hisilicon,hi6220-aoctrl", "syscon"; + reg = <0x0 0xf7800000 0x0 0x2000>; + #clock-cells = <1>; + }; + + +Hisilicon Hi6220 Media domain controller + +Required properties: +- compatible : "hisilicon,hi6220-mediactrl" +- reg : Register address and size +- #clock-cells: should be set to 1, many clock registers are defined + under this controller and this property must be present. + +Hisilicon designs this system controller to control the multimedia +domain(e.g. codec, G3D ...) for mobile platform. + +Example: + /*for Hi6220*/ + media_ctrl: media_ctrl@f4410000 { + compatible = "hisilicon,hi6220-mediactrl", "syscon"; + reg = <0x0 0xf4410000 0x0 0x1000>; + #clock-cells = <1>; + }; + + +Hisilicon Hi6220 Power Management domain controller + +Required properties: +- compatible : "hisilicon,hi6220-pmctrl" +- reg : Register address and size +- #clock-cells: should be set to 1, some clock registers are define + under this controller and this property must be present. + +Hisilicon designs this system controller to control the power management +domain for mobile platform. + +Example: + /*for Hi6220*/ + pm_ctrl: pm_ctrl@f7032000 { + compatible = "hisilicon,hi6220-pmctrl", "syscon"; + reg = <0x0 0xf7032000 0x0 0x1000>; + #clock-cells = <1>; + }; + + +Hisilicon Hi6220 SRAM controller + +Required properties: +- compatible : "hisilicon,hi6220-sramctrl", "syscon" +- reg : Register address and size + +Hisilicon's SoCs use sram for multiple purpose; on Hi6220 there have several +SRAM banks for power management, modem, security, etc. Further, use "syscon" +managing the common sram which can be shared by multiple modules. + +Example: + /*for Hi6220*/ + sram: sram@fff80000 { + compatible = "hisilicon,hi6220-sramctrl", "syscon"; + reg = <0x0 0xfff80000 0x0 0x12000>; + }; + +----------------------------------------------------------------------- Hisilicon HiP01 system controller Required properties: @@ -62,6 +171,23 @@ Example: }; ----------------------------------------------------------------------- +Hisilicon HiP05 PCIe-SAS system controller + +Required properties: +- compatible : "hisilicon,pcie-sas-subctrl", "syscon"; +- reg : Register address and size + +The HiP05 PCIe-SAS system controller is shared by PCIe and SAS controllers in +HiP05 Soc to implement some basic configurations. + +Example: + /* for HiP05 PCIe-SAS system */ + pcie_sas: system_controller@0xb0000000 { + compatible = "hisilicon,pcie-sas-subctrl", "syscon"; + reg = <0xb0000000 0x10000>; + }; + +----------------------------------------------------------------------- Hisilicon CPU controller Required properties: diff --git a/kernel/Documentation/devicetree/bindings/arm/idle-states.txt b/kernel/Documentation/devicetree/bindings/arm/idle-states.txt index a8274eaba..b8e41c148 100644 --- a/kernel/Documentation/devicetree/bindings/arm/idle-states.txt +++ b/kernel/Documentation/devicetree/bindings/arm/idle-states.txt @@ -497,7 +497,7 @@ cpus { }; idle-states { - entry-method = "arm,psci"; + entry-method = "psci"; CPU_RETENTION_0_0: cpu-retention-0-0 { compatible = "arm,idle-state"; diff --git a/kernel/Documentation/devicetree/bindings/arm/keystone/keystone.txt b/kernel/Documentation/devicetree/bindings/arm/keystone/keystone.txt index 59d7a46f8..3090a8a00 100644 --- a/kernel/Documentation/devicetree/bindings/arm/keystone/keystone.txt +++ b/kernel/Documentation/devicetree/bindings/arm/keystone/keystone.txt @@ -9,12 +9,26 @@ Required properties: the form "ti,keystone-*". Generic devices like gic, arch_timers, ns16550 type UART should use the specified compatible for those devices. +SoC families: + +- Keystone 2 generic SoC: + compatible = "ti,keystone" + +SoCs: + +- Keystone 2 Hawking/Kepler + compatible = "ti,k2hk", "ti,keystone" +- Keystone 2 Lamarr + compatible = "ti,k2l", "ti,keystone" +- Keystone 2 Edison + compatible = "ti,k2e", "ti,keystone" + Boards: - Keystone 2 Hawking/Kepler EVM - compatible = "ti,k2hk-evm","ti,keystone" + compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone" - Keystone 2 Lamarr EVM - compatible = "ti,k2l-evm","ti,keystone" + compatible = "ti,k2l-evm", "ti, k2l", "ti,keystone" - Keystone 2 Edison EVM - compatible = "ti,k2e-evm","ti,keystone" + compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone" diff --git a/kernel/Documentation/devicetree/bindings/arm/l2cc.txt b/kernel/Documentation/devicetree/bindings/arm/l2cc.txt index 0dbabe9a6..06c88a4d2 100644 --- a/kernel/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/kernel/Documentation/devicetree/bindings/arm/l2cc.txt @@ -67,6 +67,17 @@ Optional properties: disable if zero. - arm,prefetch-offset : Override prefetch offset value. Valid values are 0-7, 15, 23, and 31. +- arm,shared-override : The default behavior of the pl310 cache controller with + respect to the shareable attribute is to transform "normal memory + non-cacheable transactions" into "cacheable no allocate" (for reads) or + "write through no write allocate" (for writes). + On systems where this may cause DMA buffer corruption, this property must be + specified to indicate that such transforms are precluded. +- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1> + (forcibly enable), property absent (retain settings set by firmware) +- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable), + <1> (forcibly enable), property absent (retain settings set by + firmware) Example: diff --git a/kernel/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/kernel/Documentation/devicetree/bindings/arm/marvell,berlin.txt index a99eb9eb1..3bab18409 100644 --- a/kernel/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/kernel/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -1,6 +1,18 @@ Marvell Berlin SoC Family Device Tree Bindings --------------------------------------------------------------- +Work in progress statement: + +Device tree files and bindings applying to Marvell Berlin SoCs and boards are +considered "unstable". Any Marvell Berlin device tree binding may change at any +time. Be sure to use a device tree binary and a kernel image generated from the +same source tree. + +Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a +stable binding/ABI. + +--------------------------------------------------------------- + Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500 shall have the following properties: @@ -49,10 +61,9 @@ chip control registers, so there should be a single DT node only providing the different functions which are described below. Required properties: -- compatible: shall be one of - "marvell,berlin2-chip-ctrl" for BG2 - "marvell,berlin2cd-chip-ctrl" for BG2CD - "marvell,berlin2q-chip-ctrl" for BG2Q +- compatible: + * the first and second values must be: + "simple-mfd", "syscon" - reg: address and length of following register sets for BG2/BG2CD: chip control register set BG2Q: chip control register set and cpu pll registers @@ -63,90 +74,23 @@ Marvell Berlin SoCs have a system control register set providing several individual registers dealing with pinmux, padmux, and reset. Required properties: -- compatible: should be one of - "marvell,berlin2-system-ctrl" for BG2 - "marvell,berlin2cd-system-ctrl" for BG2CD - "marvell,berlin2q-system-ctrl" for BG2Q +- compatible: + * the first and second values must be: + "simple-mfd", "syscon" - reg: address and length of the system control register set -* Clock provider binding - -As clock related registers are spread among the chip control registers, the -chip control node also provides the clocks. Marvell Berlin2 (BG2, BG2CD, BG2Q) -SoCs share the same IP for PLLs and clocks, with some minor differences in -features and register layout. - -Required properties: -- #clock-cells: shall be set to 1 -- clocks: clock specifiers referencing the core clock input clocks -- clock-names: array of strings describing the input clock specifiers above. - Allowed clock-names for the reference clocks are - "refclk" for the SoCs osciallator input on all SoCs, - and SoC-specific input clocks for - BG2/BG2CD: "video_ext0" for the external video clock input - -Clocks provided by core clocks shall be referenced by a clock specifier -indexing one of the provided clocks. Refer to dt-bindings/clock/berlin<soc>.h -for the corresponding index mapping. - -* Pin controller binding - -Pin control registers are part of both register sets, chip control and system -control. The pins controlled are organized in groups, so no actual pin -information is needed. - -A pin-controller node should contain subnodes representing the pin group -configurations, one per function. Each subnode has the group name and the muxing -function used. - -Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is called -a 'function' in the pin-controller subsystem. - -Required subnode-properties: -- groups: a list of strings describing the group names. -- function: a string describing the function used to mux the groups. - -* Reset controller binding - -A reset controller is part of the chip control registers set. The chip control -node also provides the reset. The register set is not at the same offset between -Berlin SoCs. - -Required property: -- #reset-cells: must be set to 2 - Example: chip: chip-control@ea0000 { - compatible = "marvell,berlin2-chip-ctrl"; - #clock-cells = <1>; - #reset-cells = <2>; + compatible = "simple-mfd", "syscon"; reg = <0xea0000 0x400>; - clocks = <&refclk>, <&externaldev 0>; - clock-names = "refclk", "video_ext0"; - spi1_pmux: spi1-pmux { - groups = "G0"; - function = "spi1"; - }; + /* sub-device nodes */ }; sysctrl: system-controller@d000 { - compatible = "marvell,berlin2-system-ctrl"; + compatible = "simple-mfd", "syscon"; reg = <0xd000 0x100>; - uart0_pmux: uart0-pmux { - groups = "GSM4"; - function = "uart0"; - }; - - uart1_pmux: uart1-pmux { - groups = "GSM5"; - function = "uart1"; - }; - - uart2_pmux: uart2-pmux { - groups = "GSM3"; - function = "uart2"; - }; + /* sub-device nodes */ }; diff --git a/kernel/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/kernel/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt index 4f40ff3fe..5171ad8f4 100644 --- a/kernel/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt +++ b/kernel/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt @@ -20,6 +20,8 @@ And in addition, the compatible shall be extended with the specific board. Currently known boards are: "buffalo,lschlv2" +"buffalo,lswvl" +"buffalo,lswxl" "buffalo,lsxhl" "buffalo,lsxl" "dlink,dns-320" diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek.txt index dd7550a29..618a91994 100644 --- a/kernel/Documentation/devicetree/bindings/arm/mediatek.txt +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek.txt @@ -1,12 +1,15 @@ -MediaTek mt65xx & mt81xx Platforms Device Tree Bindings +MediaTek mt65xx, mt67xx & mt81xx Platforms Device Tree Bindings -Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property: +Boards with a MediaTek mt65xx/mt67xx/mt81xx SoC shall have the +following property: Required root node property: compatible: Must contain one of + "mediatek,mt6580" "mediatek,mt6589" "mediatek,mt6592" + "mediatek,mt6795" "mediatek,mt8127" "mediatek,mt8135" "mediatek,mt8173" @@ -14,12 +17,18 @@ compatible: Must contain one of Supported boards: +- Evaluation board for MT6580: + Required root node properties: + - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580"; - bq Aquaris5 smart phone: Required root node properties: - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589"; - Evaluation board for MT6592: Required root node properties: - compatible = "mediatek,mt6592-evb", "mediatek,mt6592"; +- Evaluation board for MT6795(Helio X10): + Required root node properties: + - compatible = "mediatek,mt6795-evb", "mediatek,mt6795"; - MTK mt8127 tablet moose EVB: Required root node properties: - compatible = "mediatek,mt8127-moose", "mediatek,mt8127"; diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt new file mode 100644 index 000000000..936166fbe --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -0,0 +1,23 @@ +Mediatek apmixedsys controller +============================== + +The Mediatek apmixedsys controller provides the PLLs to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt8135-apmixedsys" + - "mediatek,mt8173-apmixedsys" +- #clock-cells: Must be 1 + +The apmixedsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +apmixedsys: clock-controller@10209000 { + compatible = "mediatek,mt8173-apmixedsys"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt new file mode 100644 index 000000000..b1f2ce17d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -0,0 +1,22 @@ +Mediatek imgsys controller +============================ + +The Mediatek imgsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt8173-imgsys", "syscon" +- #clock-cells: Must be 1 + +The imgsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +imgsys: clock-controller@15000000 { + compatible = "mediatek,mt8173-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt new file mode 100644 index 000000000..f6cd3e419 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -0,0 +1,30 @@ +Mediatek infracfg controller +============================ + +The Mediatek infracfg controller provides various clocks and reset +outputs to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt8135-infracfg", "syscon" + - "mediatek,mt8173-infracfg", "syscon" +- #clock-cells: Must be 1 +- #reset-cells: Must be 1 + +The infracfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. +Also it uses the common reset controller binding from +Documentation/devicetree/bindings/reset/reset.txt. +The available reset outputs are defined in +dt-bindings/reset-controller/mt*-resets.h + +Example: + +infracfg: power-controller@10001000 { + compatible = "mediatek,mt8173-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt new file mode 100644 index 000000000..4385946ea --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -0,0 +1,22 @@ +Mediatek mmsys controller +============================ + +The Mediatek mmsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt8173-mmsys", "syscon" +- #clock-cells: Must be 1 + +The mmsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mmsys: clock-controller@14000000 { + compatible = "mediatek,mt8173-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt new file mode 100644 index 000000000..f25b85499 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -0,0 +1,30 @@ +Mediatek pericfg controller +=========================== + +The Mediatek pericfg controller provides various clocks and reset +outputs to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt8135-pericfg", "syscon" + - "mediatek,mt8173-pericfg", "syscon" +- #clock-cells: Must be 1 +- #reset-cells: Must be 1 + +The pericfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. +Also it uses the common reset controller binding from +Documentation/devicetree/bindings/reset/reset.txt. +The available reset outputs are defined in +dt-bindings/reset-controller/mt*-resets.h + +Example: + +pericfg: power-controller@10003000 { + compatible = "mediatek,mt8173-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt new file mode 100644 index 000000000..f9e917994 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -0,0 +1,23 @@ +Mediatek topckgen controller +============================ + +The Mediatek topckgen controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt8135-topckgen" + - "mediatek,mt8173-topckgen" +- #clock-cells: Must be 1 + +The topckgen controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +topckgen: power-controller@10000000 { + compatible = "mediatek,mt8173-topckgen"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt new file mode 100644 index 000000000..1faacf1c1 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -0,0 +1,22 @@ +Mediatek vdecsys controller +============================ + +The Mediatek vdecsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt8173-vdecsys", "syscon" +- #clock-cells: Must be 1 + +The vdecsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +vdecsys: clock-controller@16000000 { + compatible = "mediatek,mt8173-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt new file mode 100644 index 000000000..3cc299fd7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencltsys.txt @@ -0,0 +1,22 @@ +Mediatek vencltsys controller +============================ + +The Mediatek vencltsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt8173-vencltsys", "syscon" +- #clock-cells: Must be 1 + +The vencltsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +vencltsys: clock-controller@19000000 { + compatible = "mediatek,mt8173-vencltsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt new file mode 100644 index 000000000..5bb2866a2 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt @@ -0,0 +1,22 @@ +Mediatek vencsys controller +============================ + +The Mediatek vencsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt8173-vencsys", "syscon" +- #clock-cells: Must be 1 + +The vencsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +vencsys: clock-controller@18000000 { + compatible = "mediatek,mt8173-vencsys", "syscon"; + reg = <0 0x18000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/mvebu-cpu-config.txt b/kernel/Documentation/devicetree/bindings/arm/mvebu-cpu-config.txt new file mode 100644 index 000000000..2cdcd716d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/mvebu-cpu-config.txt @@ -0,0 +1,20 @@ +MVEBU CPU Config registers +-------------------------- + +MVEBU (Marvell SOCs: Armada 370/XP) + +Required properties: + +- compatible: one of: + - "marvell,armada-370-cpu-config" + - "marvell,armada-xp-cpu-config" + +- reg: Should contain CPU config registers location and length, in + their per-CPU variant + +Example: + + cpu-config@21000 { + compatible = "marvell,armada-xp-cpu-config"; + reg = <0x21000 0x8>; + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/omap/omap.txt b/kernel/Documentation/devicetree/bindings/arm/omap/omap.txt index 4f6a82cef..12af302bc 100644 --- a/kernel/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/kernel/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -23,6 +23,7 @@ Optional properties: during suspend. - ti,no-reset-on-init: When present, the module should not be reset at init - ti,no-idle-on-init: When present, the module should not be idled at init +- ti,no-idle: When present, the module is never allowed to idle. Example: @@ -135,6 +136,9 @@ Boards: - AM335X OrionLXm : Substation Automation Platform compatible = "novatech,am335x-lxm", "ti,am33xx" +- AM335X phyBOARD-WEGA: Single Board Computer dev kit + compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx" + - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" diff --git a/kernel/Documentation/devicetree/bindings/arm/pmu.txt b/kernel/Documentation/devicetree/bindings/arm/pmu.txt index 3b5f5d108..97ba45af0 100644 --- a/kernel/Documentation/devicetree/bindings/arm/pmu.txt +++ b/kernel/Documentation/devicetree/bindings/arm/pmu.txt @@ -7,7 +7,10 @@ representation in the device tree should be done as under:- Required properties: - compatible : should be one of + "apm,potenza-pmu" "arm,armv8-pmuv3" + "arm.cortex-a57-pmu" + "arm.cortex-a53-pmu" "arm,cortex-a17-pmu" "arm,cortex-a15-pmu" "arm,cortex-a12-pmu" @@ -26,13 +29,19 @@ Required properties: Optional properties: -- interrupt-affinity : Valid only when using SPIs, specifies a list of phandles - to CPU nodes corresponding directly to the affinity of +- interrupt-affinity : When using SPIs, specifies a list of phandles to CPU + nodes corresponding directly to the affinity of the SPIs listed in the interrupts property. - This property should be present when there is more than + When using a PPI, specifies a list of phandles to CPU + nodes corresponding to the set of CPUs which have + a PMU of this type signalling the PPI listed in the + interrupts property. + + This property should be present when there is more than a single SPI. + - qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd events. diff --git a/kernel/Documentation/devicetree/bindings/arm/psci.txt b/kernel/Documentation/devicetree/bindings/arm/psci.txt index 5aa40ede0..a9adab84e 100644 --- a/kernel/Documentation/devicetree/bindings/arm/psci.txt +++ b/kernel/Documentation/devicetree/bindings/arm/psci.txt @@ -31,6 +31,10 @@ Main node required properties: support, but are permitted to be present for compatibility with existing software when "arm,psci" is later in the compatible list. + * "arm,psci-1.0" : for implementations complying to PSCI 1.0. PSCI 1.0 is + backward compatible with PSCI 0.2 with minor specification updates, + as defined in the PSCI specification[2]. + - method : The method of calling the PSCI firmware. Permitted values are: @@ -100,3 +104,5 @@ Case 3: PSCI v0.2 and PSCI v0.1. [1] Kernel documentation - ARM idle states bindings Documentation/devicetree/bindings/arm/idle-states.txt +[2] Power State Coordination Interface (PSCI) specification + http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf diff --git a/kernel/Documentation/devicetree/bindings/arm/rockchip.txt b/kernel/Documentation/devicetree/bindings/arm/rockchip.txt index 60d4a1e0a..8e985dd2f 100644 --- a/kernel/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/kernel/Documentation/devicetree/bindings/arm/rockchip.txt @@ -17,6 +17,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "radxa,rock", "rockchip,rk3188"; +- Radxa Rock2 Square board: + Required root node properties: + - compatible = "radxa,rock2-square", "rockchip,rk3288"; + - Firefly Firefly-RK3288 board: Required root node properties: - compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; @@ -26,3 +30,45 @@ Rockchip platforms device tree bindings - ChipSPARK PopMetal-RK3288 board: Required root node properties: - compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; + +- Netxeon R89 board: + Required root node properties: + - compatible = "netxeon,r89", "rockchip,rk3288"; + +- Google Jaq (Haier Chromebook 11 and more): + Required root node properties: + - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", + "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", + "google,veyron-jaq-rev1", "google,veyron-jaq", + "google,veyron", "rockchip,rk3288"; + +- Google Jerry (Hisense Chromebook C11 and more): + Required root node properties: + - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", + "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", + "google,veyron-jerry-rev3", "google,veyron-jerry", + "google,veyron", "rockchip,rk3288"; + +- Google Minnie (Asus Chromebook Flip C100P): + Required root node properties: + - compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3", + "google,veyron-minnie-rev2", "google,veyron-minnie-rev1", + "google,veyron-minnie-rev0", "google,veyron-minnie", + "google,veyron", "rockchip,rk3288"; + +- Google Pinky (dev-board): + Required root node properties: + - compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", + "google,veyron", "rockchip,rk3288"; + +- Google Speedy (Asus C201 Chromebook): + Required root node properties: + - compatible = "google,veyron-speedy-rev9", "google,veyron-speedy-rev8", + "google,veyron-speedy-rev7", "google,veyron-speedy-rev6", + "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", + "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", + "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; + +- Rockchip R88 board: + Required root node properties: + - compatible = "rockchip,r88", "rockchip,rk3368"; diff --git a/kernel/Documentation/devicetree/bindings/arm/samsung-boards.txt b/kernel/Documentation/devicetree/bindings/arm/samsung-boards.txt deleted file mode 100644 index 43589d246..000000000 --- a/kernel/Documentation/devicetree/bindings/arm/samsung-boards.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Samsung's Exynos SoC based boards - -Required root node properties: - - compatible = should be one or more of the following. - - "samsung,monk" - for Exynos3250-based Samsung Simband board. - - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board. - - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board. - - "samsung,trats" - for Exynos4210-based Tizen Reference board. - - "samsung,universal_c210" - for Exynos4210-based Samsung board. - - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board. - - "samsung,trats2" - for Exynos4412-based Tizen Reference board. - - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board. - - "samsung,xyref5260" - for Exynos5260-based Samsung board. - - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. - - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. - - "samsung,sd5v1" - for Exynos5440-based Samsung board. - - "samsung,ssdk5440" - for Exynos5440-based Samsung board. - -Optional: - - firmware node, specifying presence and type of secure firmware: - - compatible: only "samsung,secure-firmware" is currently supported - - reg: address of non-secure SYSRAM used for communication with firmware - - firmware@0203F000 { - compatible = "samsung,secure-firmware"; - reg = <0x0203F000 0x1000>; - }; diff --git a/kernel/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/kernel/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt new file mode 100644 index 000000000..12129c011 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -0,0 +1,69 @@ +* Samsung's Exynos SoC based boards + +Required root node properties: + - compatible = should be one or more of the following. + - "samsung,monk" - for Exynos3250-based Samsung Simband board. + - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board. + - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board. + - "samsung,trats" - for Exynos4210-based Tizen Reference board. + - "samsung,universal_c210" - for Exynos4210-based Samsung board. + - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board. + - "samsung,trats2" - for Exynos4412-based Tizen Reference board. + - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board. + - "samsung,xyref5260" - for Exynos5260-based Samsung board. + - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. + - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. + - "samsung,sd5v1" - for Exynos5440-based Samsung board. + - "samsung,ssdk5440" - for Exynos5440-based Samsung board. + +* Other companies Exynos SoC based + * FriendlyARM + - "friendlyarm,tiny4412" - for Exynos4412-based FriendlyARM + TINY4412 board. + + * Google + - "google,pi" - for Exynos5800-based Google Peach Pi + Rev 10+ board, + also: "google,pi-rev16", "google,pi-rev15", "google,pi-rev14", + "google,pi-rev13", "google,pi-rev12", "google,pi-rev11", + "google,pi-rev10", "google,peach". + + - "google,pit" - for Exynos5420-based Google Peach Pit + Rev 6+ (Exynos5420), + also: "google,pit-rev16", "google,pit-rev15", "google,pit-rev14", + "google,pit-rev13", "google,pit-rev12", "google,pit-rev11", + "google,pit-rev10", "google,pit-rev9", "google,pit-rev8", + "google,pit-rev7", "google,pit-rev6", "google,peach". + + - "google,snow-rev4" - for Exynos5250-based Google Snow board, + also: "google,snow" + - "google,snow-rev5" - for Exynos5250-based Google Snow + Rev 5+ board. + - "google,spring" - for Exynos5250-based Google Spring board. + + * Hardkernel + - "hardkernel,odroid-u3" - for Exynos4412-based Hardkernel Odroid U3. + - "hardkernel,odroid-x" - for Exynos4412-based Hardkernel Odroid X. + - "hardkernel,odroid-x2" - for Exynos4412-based Hardkernel Odroid X2. + - "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3. + - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel + Odroid XU3 Lite board. + - "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4. + + * Insignal + - "insignal,arndale" - for Exynos5250-based Insignal Arndale board. + - "insignal,arndale-octa" - for Exynos5420-based Insignal Arndale + Octa board. + - "insignal,origen" - for Exynos4210-based Insignal Origen board. + - "insignal,origen4412 - for Exynos4412-based Insignal Origen board. + + +Optional nodes: + - firmware node, specifying presence and type of secure firmware: + - compatible: only "samsung,secure-firmware" is currently supported + - reg: address of non-secure SYSRAM used for communication with firmware + + firmware@0203F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0203F000 0x1000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/scu.txt b/kernel/Documentation/devicetree/bindings/arm/scu.txt new file mode 100644 index 000000000..c44768051 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/scu.txt @@ -0,0 +1,25 @@ +* ARM Snoop Control Unit (SCU) + +As part of the MPCore complex, Cortex-A5 and Cortex-A9 are provided +with a Snoop Control Unit. The register range is usually 256 (0x100) +bytes. + +References: + +- Cortex-A9: see DDI0407E Cortex-A9 MPCore Technical Reference Manual + Revision r2p0 +- Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual + Revision r0p1 + +- compatible : Should be: + "arm,cortex-a9-scu" + "arm,cortex-a5-scu" + +- reg : Specify the base address and the size of the SCU register window. + +Example: + +scu@a04100000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xa0410000 0x100>; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/shmobile.txt b/kernel/Documentation/devicetree/bindings/arm/shmobile.txt index c4f19b2e7..40bb9007c 100644 --- a/kernel/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/kernel/Documentation/devicetree/bindings/arm/shmobile.txt @@ -39,8 +39,6 @@ Boards: compatible = "renesas,armadillo800eva" - BOCK-W compatible = "renesas,bockw", "renesas,r8a7778" - - BOCK-W - Reference Device Tree Implementation - compatible = "renesas,bockw-reference", "renesas,r8a7778" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" - Gose @@ -57,7 +55,7 @@ Boards: compatible = "renesas,lager", "renesas,r8a7790" - Marzen compatible = "renesas,marzen", "renesas,r8a7779" - -Note: Reference Device Tree Implementations are temporary implementations - to ease the migration from platform devices to Device Tree, and are - intended to be removed in the future. + - Porter (M2-LCDP) + compatible = "renesas,porter", "renesas,r8a7791" + - SILK (RTP0RC7794LCB00011S) + compatible = "renesas,silk", "renesas,r8a7794" diff --git a/kernel/Documentation/devicetree/bindings/arm/sp810.txt b/kernel/Documentation/devicetree/bindings/arm/sp810.txt new file mode 100644 index 000000000..6808fb5de --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/sp810.txt @@ -0,0 +1,46 @@ +SP810 System Controller +----------------------- + +Required properties: + +- compatible: standard compatible string for a Primecell peripheral, + see Documentation/devicetree/bindings/arm/primecell.txt + for more details + should be: "arm,sp810", "arm,primecell" + +- reg: standard registers property, physical address and size + of the control registers + +- clock-names: from the common clock bindings, for more details see + Documentation/devicetree/bindings/clock/clock-bindings.txt; + should be: "refclk", "timclk", "apb_pclk" + +- clocks: from the common clock bindings, phandle and clock + specifier pairs for the entries of clock-names property + +- #clock-cells: from the common clock bindings; + should be: <1> + +- clock-output-names: from the common clock bindings; + should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3" + +- assigned-clocks: from the common clock binding; + should be: clock specifier for each output clock of this + provider node + +- assigned-clock-parents: from the common clock binding; + should be: phandle of input clock listed in clocks + property with the highest frequency + +Example: + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; + assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; + + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/sunxi.txt b/kernel/Documentation/devicetree/bindings/arm/sunxi.txt index 42941fdef..bb9b0faa9 100644 --- a/kernel/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/kernel/Documentation/devicetree/bindings/arm/sunxi.txt @@ -6,7 +6,10 @@ using one of the following compatible strings: allwinner,sun4i-a10 allwinner,sun5i-a10s allwinner,sun5i-a13 + allwinner,sun5i-r8 allwinner,sun6i-a31 allwinner,sun7i-a20 allwinner,sun8i-a23 + allwinner,sun8i-a33 + allwinner,sun8i-h3 allwinner,sun9i-a80 diff --git a/kernel/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt index 5ae601e7f..5ae601e7f 100644 --- a/kernel/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt +++ b/kernel/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt diff --git a/kernel/Documentation/devicetree/bindings/arm/twd.txt b/kernel/Documentation/devicetree/bindings/arm/twd.txt index 75b861093..383ea19c2 100644 --- a/kernel/Documentation/devicetree/bindings/arm/twd.txt +++ b/kernel/Documentation/devicetree/bindings/arm/twd.txt @@ -19,6 +19,11 @@ interrupts. - reg : Specify the base address and the size of the TWD timer register window. +Optional + +- always-on : a boolean property. If present, the timer is powered through + an always-on power domain, therefore it never loses context. + Example: twd-timer@2c000600 { diff --git a/kernel/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt b/kernel/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt new file mode 100644 index 000000000..d27a646f4 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/uniphier/cache-uniphier.txt @@ -0,0 +1,60 @@ +UniPhier outer cache controller + +UniPhier SoCs are integrated with a full-custom outer cache controller system. +All of them have a level 2 cache controller, and some have a level 3 cache +controller as well. + +Required properties: +- compatible: should be "socionext,uniphier-system-cache" +- reg: offsets and lengths of the register sets for the device. It should + contain 3 regions: control register, revision register, operation register, + in this order. +- cache-unified: specifies the cache is a unified cache. +- cache-size: specifies the size in bytes of the cache +- cache-sets: specifies the number of associativity sets of the cache +- cache-line-size: specifies the line size in bytes +- cache-level: specifies the level in the cache hierarchy. The value should + be 2 for L2 cache, 3 for L3 cache, etc. + +Optional properties: +- next-level-cache: phandle to the next level cache if present. The next level + cache should be also compatible with "socionext,uniphier-system-cache". + +The L2 cache must exist to use the L3 cache; the cache hierarchy must be +indicated correctly with "next-level-cache" properties. + +Example 1 (system with L2): + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + cache-unified; + cache-size = <0x80000>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + +Example 2 (system with L2 and L3): + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + cache-unified; + cache-size = <0x200000>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; + + l3: l3-cache@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, + <0x506c8000 0x400>; + cache-unified; + cache-size = <0x400000>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/ux500/boards.txt b/kernel/Documentation/devicetree/bindings/arm/ux500/boards.txt new file mode 100644 index 000000000..b8737a8de --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/ux500/boards.txt @@ -0,0 +1,83 @@ +ST-Ericsson Ux500 boards +------------------------ + +Required properties (in root node) one of these: + compatible = "st-ericsson,mop500" (legacy) + compatible = "st-ericsson,u8500" + +Required node (under root node): + +soc: represents the system-on-chip and contains the chip +peripherals + +Required property of soc node, one of these: + compatible = "stericsson,db8500" + +Required subnodes under soc node: + +backupram: (used for CPU spin tables and for storing data +during retention, system won't boot without this): + compatible = "ste,dbx500-backupram" + +scu: + see binding for arm/scu.txt + +interrupt-controller: + see binding for arm/gic.txt + +timer: + see binding for arm/twd.txt + +clocks: + see binding for clocks/ux500.txt + +Example: + +/dts-v1/; + +/ { + model = "ST-Ericsson HREF (pre-v60) and ST UIB"; + compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "stericsson,db8500"; + interrupt-parent = <&intc>; + ranges; + + backupram@80150000 { + compatible = "ste,dbx500-backupram"; + reg = <0x80150000 0x2000>; + }; + + intc: interrupt-controller@a0411000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xa0411000 0x1000>, + <0xa0410100 0x100>; + }; + + scu@a04100000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xa0410000 0x100>; + }; + + timer@a0410600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xa0410600 0x20>; + interrupts = <1 13 0x304>; /* IRQ level high per-CPU */ + clocks = <&smp_twd_clk>; + }; + + clocks { + compatible = "stericsson,u8500-clks"; + + smp_twd_clk: smp-twd-clock { + #clock-cells = <0>; + }; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/zte.txt b/kernel/Documentation/devicetree/bindings/arm/zte.txt new file mode 100644 index 000000000..3ff5c9e85 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/arm/zte.txt @@ -0,0 +1,15 @@ +ZTE platforms device tree bindings +--------------------------------------- + +- ZX296702 board: + Required root node properties: + - compatible = "zte,zx296702-ad1", "zte,zx296702" + +System management required properties: + - compatible = "zte,sysctrl" + +Low power management required properties: + - compatible = "zte,zx296702-pcu" + +Bus matrix required properties: + - compatible = "zte,zx-bus-matrix" diff --git a/kernel/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/kernel/Documentation/devicetree/bindings/ata/ahci-ceva.txt new file mode 100644 index 000000000..7ca8b976c --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/ata/ahci-ceva.txt @@ -0,0 +1,20 @@ +Binding for CEVA AHCI SATA Controller + +Required properties: + - reg: Physical base address and size of the controller's register area. + - compatible: Compatibility string. Must be 'ceva,ahci-1v84'. + - clocks: Input clock specifier. Refer to common clock bindings. + - interrupts: Interrupt specifier. Refer to interrupt binding. + +Optional properties: + - ceva,broken-gen2: limit to gen1 speed instead of gen2. + +Examples: + ahci@fd0c0000 { + compatible = "ceva,ahci-1v84"; + reg = <0xfd0c0000 0x200>; + interrupt-parent = <&gic>; + interrupts = <0 133 4>; + clocks = <&clkc SATA_CLK_ID>; + ceva,broken-gen2; + }; diff --git a/kernel/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/kernel/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt new file mode 100644 index 000000000..032a7606b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt @@ -0,0 +1,21 @@ +Binding for Freescale QorIQ AHCI SATA Controller + +Required properties: + - reg: Physical base address and size of the controller's register area. + - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where + chip could be ls1021a, ls2080a, ls1043a etc. + - clocks: Input clock specifier. Refer to common clock bindings. + - interrupts: Interrupt specifier. Refer to interrupt binding. + +Optional properties: + - dma-coherent: Enable AHCI coherent DMA operation. + - reg-names: register area names when there are more than 1 register area. + +Examples: + sata@3200000 { + compatible = "fsl,ls1021a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + dma-coherent; + }; diff --git a/kernel/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt b/kernel/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt new file mode 100644 index 000000000..20ac9bbfa --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/ata/brcm,sata-brcmstb.txt @@ -0,0 +1,34 @@ +* Broadcom SATA3 AHCI Controller for STB + +SATA nodes are defined to describe on-chip Serial ATA controllers. +Each SATA controller should have its own node. + +Required properties: +- compatible : compatible list, may contain "brcm,bcm7445-ahci" and/or + "brcm,sata3-ahci" +- reg : register mappings for AHCI and SATA_TOP_CTRL +- reg-names : "ahci" and "top-ctrl" +- interrupts : interrupt mapping for SATA IRQ + +Also see ahci-platform.txt. + +Example: + + sata@f045a000 { + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; + reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>; + reg-names = "ahci", "top-ctrl"; + interrupts = <0 30 0>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy 0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy 1>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/kernel/Documentation/devicetree/bindings/board/fsl-board.txt index cff38bdbc..fb7b03ec2 100644 --- a/kernel/Documentation/devicetree/bindings/powerpc/fsl/board.txt +++ b/kernel/Documentation/devicetree/bindings/board/fsl-board.txt @@ -21,11 +21,14 @@ Example: This is the memory-mapped registers for on board FPGA. -Required properities: +Required properties: - compatible: should be a board-specific string followed by a string indicating the type of FPGA. Example: - "fsl,<board>-fpga", "fsl,fpga-pixis" + "fsl,<board>-fpga", "fsl,fpga-pixis", or + "fsl,<board>-fpga", "fsl,fpga-qixis" - reg: should contain the address and the length of the FPGA register set. + +Optional properties: - interrupt-parent: should specify phandle for the interrupt controller. - interrupts: should specify event (wakeup) IRQ. @@ -38,6 +41,13 @@ Example (P1022DS): interrupts = <8 8 0 0>; }; +Example (LS2080A-RDB): + + cpld@3,0 { + compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis"; + reg = <0x3 0 0x10000>; + }; + * Freescale BCSR GPIO banks Some BCSR registers act as simple GPIO controllers, each such diff --git a/kernel/Documentation/devicetree/bindings/bus/sunxi-rsb.txt b/kernel/Documentation/devicetree/bindings/bus/sunxi-rsb.txt new file mode 100644 index 000000000..3dd28343b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/bus/sunxi-rsb.txt @@ -0,0 +1,47 @@ +Allwinner Reduced Serial Bus (RSB) controller + +The RSB controller found on later Allwinner SoCs is an SMBus like 2 wire +serial bus with 1 master and up to 15 slaves. It is represented by a node +for the controller itself, and child nodes representing the slave devices. + +Required properties : + + - reg : Offset and length of the register set for the controller. + - compatible : Shall be "allwinner,sun8i-a23-rsb". + - interrupts : The interrupt line associated to the RSB controller. + - clocks : The gate clk associated to the RSB controller. + - resets : The reset line associated to the RSB controller. + - #address-cells : shall be 1 + - #size-cells : shall be 0 + +Optional properties : + + - clock-frequency : Desired RSB bus clock frequency in Hz. Maximum is 20MHz. + If not set this defaults to 3MHz. + +Child nodes: + +An RSB controller node can contain zero or more child nodes representing +slave devices on the bus. Child 'reg' properties should contain the slave +device's hardware address. The hardware address is hardwired in the device, +which can normally be found in the datasheet. + +Example: + + rsb@01f03400 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x01f03400 0x400>; + interrupts = <0 39 4>; + clocks = <&apb0_gates 3>; + clock-frequency = <3000000>; + resets = <&apb0_rst 3>; + #address-cells = <1>; + #size-cells = <0>; + + pmic@3e3 { + compatible = "..."; + reg = <0x3e3>; + + /* ... */ + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/chosen.txt b/kernel/Documentation/devicetree/bindings/chosen.txt index ed838f453..6ae9d82d4 100644 --- a/kernel/Documentation/devicetree/bindings/chosen.txt +++ b/kernel/Documentation/devicetree/bindings/chosen.txt @@ -44,3 +44,11 @@ Implementation note: Linux will look for the property "linux,stdout-path" or on PowerPC "stdout" if "stdout-path" is not found. However, the "linux,stdout-path" and "stdout" properties are deprecated. New platforms should only use the "stdout-path" property. + +linux,booted-from-kexec +----------------------- + +This property is set (currently only on PowerPC, and only needed on +book3e) by some versions of kexec-tools to tell the new kernel that it +is being booted by kexec, as the booting environment may differ (e.g. +a different secondary CPU release mechanism) diff --git a/kernel/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt b/kernel/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt new file mode 100644 index 000000000..2b7b3fa58 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/amlogic,meson8b-clkc.txt @@ -0,0 +1,40 @@ +* Amlogic Meson8b Clock and Reset Unit + +The Amlogic Meson8b clock controller generates and supplies clock to various +controllers within the SoC. + +Required Properties: + +- compatible: should be "amlogic,meson8b-clkc" +- reg: it must be composed by two tuples: + 0) physical base address of the xtal register and length of memory + mapped region. + 1) physical base address of the clock controller and length of memory + mapped region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/meson8b-clkc.h header and can be +used in device tree sources. + +Example: Clock controller node: + + clkc: clock-controller@c1104000 { + #clock-cells = <1>; + compatible = "amlogic,meson8b-clkc"; + reg = <0xc1108000 0x4>, <0xc1104000 0x460>; + }; + + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x14>; + interrupts = <0 90 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/at91-clock.txt b/kernel/Documentation/devicetree/bindings/clock/at91-clock.txt index 5ba645069..181bc8ac4 100644 --- a/kernel/Documentation/devicetree/bindings/clock/at91-clock.txt +++ b/kernel/Documentation/devicetree/bindings/clock/at91-clock.txt @@ -77,6 +77,9 @@ Required properties: "atmel,sama5d4-clk-h32mx": at91 h32mx clock + "atmel,sama5d2-clk-generated": + at91 generated clock + Required properties for SCKC node: - reg : defines the IO memory reserved for the SCKC. - #size-cells : shall be 0 (reg is used to encode clk id). @@ -461,3 +464,35 @@ For example: compatible = "atmel,sama5d4-clk-h32mx"; clocks = <&mck>; }; + +Required properties for generated clocks: +- #size-cells : shall be 0 (reg is used to encode clk id). +- #address-cells : shall be 1 (reg is used to encode clk id). +- clocks : shall be the generated clock source phandles. + e.g. clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>; +- name: device tree node describing a specific generated clock. + * #clock-cells : from common clock binding; shall be set to 0. + * reg: peripheral id. See Atmel's datasheets to get a full + list of peripheral ids. + * atmel,clk-output-range : minimum and maximum clock frequency + (two u32 fields). + +For example: + gck { + compatible = "atmel,sama5d2-clk-generated"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>; + + tcb0_gclk: tcb0_gclk { + #clock-cells = <0>; + reg = <35>; + atmel,clk-output-range = <0 83000000>; + }; + + pwm_gclk: pwm_gclk { + #clock-cells = <0>; + reg = <38>; + atmel,clk-output-range = <0 83000000>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt b/kernel/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt deleted file mode 100644 index 00d26edec..000000000 --- a/kernel/Documentation/devicetree/bindings/clock/bcm-cygnus-clock.txt +++ /dev/null @@ -1,34 +0,0 @@ -Broadcom Cygnus Clocks - -This binding uses the common clock binding: -Documentation/devicetree/bindings/clock/clock-bindings.txt - -Currently various "fixed" clocks are declared for peripheral drivers that use -the common clock framework to reference their core clocks. Proper support of -these clocks will be added later - -Device tree example: - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <1>; - clock-frequency = <25000000>; - }; - - apb_clk: apb_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000000>; - }; - - periph_clk: periph_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <500000000>; - }; - }; diff --git a/kernel/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/kernel/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt new file mode 100644 index 000000000..e56a1df3a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt @@ -0,0 +1,45 @@ +Broadcom BCM2835 CPRMAN clocks + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +The CPRMAN clock controller generates clocks in the audio power domain +of the BCM2835. There is a level of PLLs deriving from an external +oscillator, a level of PLL dividers that produce channels off of the +few PLLs, and a level of mostly-generic clock generators sourcing from +the PLL channels. Most other hardware components source from the +clock generators, but a few (like the ARM or HDMI) will source from +the PLL dividers directly. + +Required properties: +- compatible: Should be "brcm,bcm2835-cprman" +- #clock-cells: Should be <1>. The permitted clock-specifier values can be + found in include/dt-bindings/clock/bcm2835.h +- reg: Specifies base physical address and size of the registers +- clocks: The external oscillator clock phandle + +Example: + + clk_osc: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-output-names = "osc"; + clock-frequency = <19200000>; + }; + + clocks: cprman@7e101000 { + compatible = "brcm,bcm2835-cprman"; + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + clocks = <&clk_osc>; + }; + + i2c0: i2c@7e205000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e205000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/kernel/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt new file mode 100644 index 000000000..ede65a55e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -0,0 +1,210 @@ +Broadcom iProc Family Clocks + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +The iProc clock controller manages clocks that are common to the iProc family. +An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL, +LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL +comprises of several leaf clocks + +Required properties for a PLL and its leaf clocks: + +- compatible: + Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on +Cygnus has a compatible string of "brcm,cygnus-genpll" + +- #clock-cells: + Have a value of <1> since there are more than 1 leaf clock of a given PLL + +- reg: + Define the base and range of the I/O address space that contain the iProc +clock control registers required for the PLL + +- clocks: + The input parent clock phandle for the PLL. For most iProc PLLs, this is an +onboard crystal with a fixed rate + +- clock-output-names: + An ordered list of strings defining the names of the clocks + +Example: + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + genpll: genpll { + #clock-cells = <1>; + compatible = "brcm,cygnus-genpll"; + reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; + clocks = <&osc>; + clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", + "enet_sw", "audio_125", "can"; + }; + +Required properties for ASIU clocks: + +ASIU clocks are a special case. These clocks are derived directly from the +reference clock of the onboard crystal + +- compatible: + Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU +clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk" + +- #clock-cells: + Have a value of <1> since there are more than 1 ASIU clocks + +- reg: + Define the base and range of the I/O address space that contain the iProc +clock control registers required for ASIU clocks + +- clocks: + The input parent clock phandle for the ASIU clock, i.e., the onboard +crystal + +- clock-output-names: + An ordered list of strings defining the names of the ASIU clocks + +Example: + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + asiu_clks: asiu_clks { + #clock-cells = <1>; + compatible = "brcm,cygnus-asiu-clk"; + reg = <0x0301d048 0xc>, <0x180aa024 0x4>; + clocks = <&osc>; + clock-output-names = "keypad", "adc/touch", "pwm"; + }; + +Cygnus +------ +PLL and leaf clock compatible strings for Cygnus are: + "brcm,cygnus-armpll" + "brcm,cygnus-genpll" + "brcm,cygnus-lcpll0" + "brcm,cygnus-mipipll" + "brcm,cygnus-asiu-clk" + +The following table defines the set of PLL/clock index and ID for Cygnus. +These clock IDs are defined in: + "include/dt-bindings/clock/bcm-cygnus.h" + + Clock Source (Parent) Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK + adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK + pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK + + genpll crystal 0 BCM_CYGNUS_GENPLL + axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK + 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK + ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK + enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK + audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK + can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK + + lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 + pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK + ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK + sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK + usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK + smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK + ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED + + mipipll crystal 0 BCM_CYGNUS_MIPIPLL + ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED + ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD + ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D + ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED + ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED + ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED + +Northstar and Northstar Plus +------ +PLL and leaf clock compatible strings for Northstar and Northstar Plus are: + "brcm,nsp-armpll" + "brcm,nsp-genpll" + "brcm,nsp-lcpll0" + +The following table defines the set of PLL/clock index and ID for Northstar and +Northstar Plus. These clock IDs are defined in: + "include/dt-bindings/clock/bcm-nsp.h" + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + genpll crystal 0 BCM_NSP_GENPLL + phy genpll 1 BCM_NSP_GENPLL_PHY_CLK + ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK + usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK + iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK + sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK + sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK + + lcpll0 crystal 0 BCM_NSP_LCPLL0 + pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK + sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK + ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK + +Northstar 2 +----------- +PLL and leaf clock compatible strings for Northstar 2 are: + "brcm,ns2-genpll-scr" + "brcm,ns2-genpll-sw" + "brcm,ns2-lcpll-ddr" + "brcm,ns2-lcpll-ports" + +The following table defines the set of PLL/clock index and ID for Northstar 2. +These clock IDs are defined in: + "include/dt-bindings/clock/bcm-ns2.h" + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + genpll_scr crystal 0 BCM_NS2_GENPLL_SCR + scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK + fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK + audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK + ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED + ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED + ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED + + genpll_sw crystal 0 BCM_NS2_GENPLL_SW + rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK + 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK + nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK + chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK + port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK + sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK + + lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR + pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK + ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK + ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED + ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED + ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED + ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED + + lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS + wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK + rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK + ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED + ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED + ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED + ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED diff --git a/kernel/Documentation/devicetree/bindings/clock/clock-bindings.txt b/kernel/Documentation/devicetree/bindings/clock/clock-bindings.txt index 06fc6d541..2ec489eeb 100644 --- a/kernel/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/kernel/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -138,9 +138,10 @@ Some platforms may require initial configuration of default parent clocks and clock frequencies. Such a configuration can be specified in a device tree node through assigned-clocks, assigned-clock-parents and assigned-clock-rates properties. The assigned-clock-parents property should contain a list of parent -clocks in form of phandle and clock specifier pairs, the assigned-clock-parents -property the list of assigned clock frequency values - corresponding to clocks -listed in the assigned-clocks property. +clocks in the form of a phandle and clock specifier pair and the +assigned-clock-rates property should contain a list of frequencies in Hz. Both +these properties should correspond to the clocks listed in the assigned-clocks +property. To skip setting parent or rate of a clock its corresponding entry should be set to 0, or can be omitted if it is not followed by any non-zero entry. diff --git a/kernel/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt b/kernel/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt new file mode 100644 index 000000000..54d6d1358 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/csr,atlas7-car.txt @@ -0,0 +1,55 @@ +* Clock and reset bindings for CSR atlas7 + +Required properties: +- compatible: Should be "sirf,atlas7-car" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- #reset-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. +The ID list atlas7_clks defined in drivers/clk/sirf/clk-atlas7.c + +The reset consumer should specify the desired reset by having the reset +ID in its "reset" phandle cell. +The ID list atlas7_reset_unit defined in drivers/clk/sirf/clk-atlas7.c + +Examples: Clock and reset controller node: + +car: clock-controller@18620000 { + compatible = "sirf,atlas7-car"; + reg = <0x18620000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; +}; + +Examples: Consumers using clock or reset: + +timer@10dc0000 { + compatible = "sirf,macro-tick"; + reg = <0x10dc0000 0x1000>; + clocks = <&car 54>; + interrupts = <0 0 0>, + <0 1 0>, + <0 2 0>, + <0 49 0>, + <0 50 0>, + <0 51 0>; +}; + +uart1: uart@18020000 { + cell-index = <1>; + compatible = "sirf,macro-uart"; + reg = <0x18020000 0x1000>; + clocks = <&clks 95>; + interrupts = <0 18 0>; + fifosize = <32>; +}; + +vpp@13110000 { + compatible = "sirf,prima2-vpp"; + reg = <0x13110000 0x10000>; + interrupts = <0 31 0>; + clocks = <&car 85>; + resets = <&car 29>; +}; diff --git a/kernel/Documentation/devicetree/bindings/clock/emev2-clock.txt b/kernel/Documentation/devicetree/bindings/clock/emev2-clock.txt index 60bbb1a8c..268ca6154 100644 --- a/kernel/Documentation/devicetree/bindings/clock/emev2-clock.txt +++ b/kernel/Documentation/devicetree/bindings/clock/emev2-clock.txt @@ -52,7 +52,7 @@ usia_u0_sclk: usia_u0_sclk { Example of consumer: -uart@e1020000 { +serial@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; interrupts = <0 8 0>; diff --git a/kernel/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt b/kernel/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt new file mode 100644 index 000000000..2be1e038c --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/gpio-mux-clock.txt @@ -0,0 +1,19 @@ +Binding for simple gpio clock multiplexer. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "gpio-mux-clock". +- clocks: list of two references to parent clocks. +- #clock-cells : from common clock binding; shall be set to 0. +- select-gpios : GPIO reference for selecting the parent clock. + +Example: + clock { + compatible = "gpio-mux-clock"; + clocks = <&parentclk1>, <&parentclk2>; + #clock-cells = <0>; + select-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/kernel/Documentation/devicetree/bindings/clock/hi6220-clock.txt new file mode 100644 index 000000000..e4d5feaeb --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/hi6220-clock.txt @@ -0,0 +1,51 @@ +* Hisilicon Hi6220 Clock Controller + +Clock control registers reside in different Hi6220 system controllers, +please refer the following document to know more about the binding rules +for these system controllers: + +Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt + +Required Properties: + +- compatible: the compatible should be one of the following strings to + indicate the clock controller functionality. + + - "hisilicon,hi6220-aoctrl" + - "hisilicon,hi6220-sysctrl" + - "hisilicon,hi6220-mediactrl" + - "hisilicon,hi6220-pmctrl" + - "hisilicon,hi6220-stub-clk" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Optional Properties: + +- hisilicon,hi6220-clk-sram: phandle to the syscon managing the SoC internal sram; + the driver need use the sram to pass parameters for frequency change. + +- mboxes: use the label reference for the mailbox as the first parameter, the + second parameter is the channel number. + +Example 1: + sys_ctrl: sys_ctrl@f7030000 { + compatible = "hisilicon,hi6220-sysctrl", "syscon"; + reg = <0x0 0xf7030000 0x0 0x2000>; + #clock-cells = <1>; + }; + +Example 2: + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mboxes = <&mailbox 1>; + }; + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>. diff --git a/kernel/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/kernel/Documentation/devicetree/bindings/clock/imx6ul-clock.txt new file mode 100644 index 000000000..571d5039f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/imx6ul-clock.txt @@ -0,0 +1,13 @@ +* Clock bindings for Freescale i.MX6 UltraLite + +Required properties: +- compatible: Should be "fsl,imx6ul-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h +for the full list of i.MX6 UltraLite clock IDs. diff --git a/kernel/Documentation/devicetree/bindings/clock/imx7d-clock.txt b/kernel/Documentation/devicetree/bindings/clock/imx7d-clock.txt new file mode 100644 index 000000000..9d3026d81 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/imx7d-clock.txt @@ -0,0 +1,13 @@ +* Clock bindings for Freescale i.MX7 Dual + +Required properties: +- compatible: Should be "fsl,imx7d-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include entries "ckil", "osc" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx7d-clock.h +for the full list of i.MX7 Dual clock IDs. diff --git a/kernel/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/kernel/Documentation/devicetree/bindings/clock/ingenic,cgu.txt new file mode 100644 index 000000000..f8d4134ae --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/ingenic,cgu.txt @@ -0,0 +1,53 @@ +Ingenic SoC CGU binding + +The CGU in an Ingenic SoC provides all the clocks generated on-chip. It +typically includes a variety of PLLs, multiplexers, dividers & gates in order +to provide many different clock signals derived from only 2 external source +clocks. + +Required properties: +- compatible : Should be "ingenic,<soctype>-cgu". + For example "ingenic,jz4740-cgu" or "ingenic,jz4780-cgu". +- reg : The address & length of the CGU registers. +- clocks : List of phandle & clock specifiers for clocks external to the CGU. + Two such external clocks should be specified - first the external crystal + "ext" and second the RTC clock source "rtc". +- clock-names : List of name strings for the external clocks. +- #clock-cells: Should be 1. + Clock consumers specify this argument to identify a clock. The valid values + may be found in <dt-bindings/clock/<soctype>-cgu.h>. + +Example SoC include file: + +/ { + cgu: jz4740-cgu { + compatible = "ingenic,jz4740-cgu"; + reg = <0x10000000 0x100>; + #clock-cells = <1>; + }; + + uart0: serial@10030000 { + clocks = <&cgu JZ4740_CLK_UART0>; + }; +}; + +Example board file: + +/ { + ext: clock@0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + rtc: clock@1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + &cgu { + clocks = <&ext> <&rtc>; + clock-names: "ext", "rtc"; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt b/kernel/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt new file mode 100644 index 000000000..fa97c1201 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/lpc1850-ccu.txt @@ -0,0 +1,77 @@ +* NXP LPC1850 Clock Control Unit (CCU) + +Each CGU base clock has several clock branches which can be turned on +or off independently by the Clock Control Units CCU1 or CCU2. The +branch clocks are distributed between CCU1 and CCU2. + + - Above text taken from NXP LPC1850 User Manual. + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: + Should be "nxp,lpc1850-ccu" +- reg: + Shall define the base and range of the address space + containing clock control registers +- #clock-cells: + Shall have value <1>. The permitted clock-specifier values + are the branch clock names defined in table below. +- clocks: + Shall contain a list of phandles for the base clocks routed + from the CGU to the specific CCU. See mapping of base clocks + and CCU in table below. +- clock-names: + Shall contain a list of names for the base clock routed + from the CGU to the specific CCU. Valid CCU clock names: + "base_usb0_clk", "base_periph_clk", "base_usb1_clk", + "base_cpu_clk", "base_spifi_clk", "base_spi_clk", + "base_apb1_clk", "base_apb3_clk", "base_adchs_clk", + "base_sdio_clk", "base_ssp0_clk", "base_ssp1_clk", + "base_uart0_clk", "base_uart1_clk", "base_uart2_clk", + "base_uart3_clk", "base_audio_clk" + +Which branch clocks that are available on the CCU depends on the +specific LPC part. Check the user manual for your specific part. + +A list of CCU clocks can be found in dt-bindings/clock/lpc18xx-ccu.h. + +Example board file: + +soc { + ccu1: clock-controller@40051000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40051000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_APB3_CLK>, <&cgu BASE_APB1_CLK>, + <&cgu BASE_SPIFI_CLK>, <&cgu BASE_CPU_CLK>, + <&cgu BASE_PERIPH_CLK>, <&cgu BASE_USB0_CLK>, + <&cgu BASE_USB1_CLK>, <&cgu BASE_SPI_CLK>; + clock-names = "base_apb3_clk", "base_apb1_clk", + "base_spifi_clk", "base_cpu_clk", + "base_periph_clk", "base_usb0_clk", + "base_usb1_clk", "base_spi_clk"; + }; + + ccu2: clock-controller@40052000 { + compatible = "nxp,lpc1850-ccu"; + reg = <0x40052000 0x1000>; + #clock-cells = <1>; + clocks = <&cgu BASE_AUDIO_CLK>, <&cgu BASE_UART3_CLK>, + <&cgu BASE_UART2_CLK>, <&cgu BASE_UART1_CLK>, + <&cgu BASE_UART0_CLK>, <&cgu BASE_SSP1_CLK>, + <&cgu BASE_SSP0_CLK>, <&cgu BASE_SDIO_CLK>; + clock-names = "base_audio_clk", "base_uart3_clk", + "base_uart2_clk", "base_uart1_clk", + "base_uart0_clk", "base_ssp1_clk", + "base_ssp0_clk", "base_sdio_clk"; + }; + + /* A user of CCU brach clocks */ + uart1: serial@40082000 { + ... + clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; + ... + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt b/kernel/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt new file mode 100644 index 000000000..2cc32a9a9 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/lpc1850-cgu.txt @@ -0,0 +1,131 @@ +* NXP LPC1850 Clock Generation Unit (CGU) + +The CGU generates multiple independent clocks for the core and the +peripheral blocks of the LPC18xx. Each independent clock is called +a base clock and itself is one of the inputs to the two Clock +Control Units (CCUs) which control the branch clocks to the +individual peripherals. + +The CGU selects the inputs to the clock generators from multiple +clock sources, controls the clock generation, and routes the outputs +of the clock generators through the clock source bus to the output +stages. Each output stage provides an independent clock source and +corresponds to one of the base clocks for the LPC18xx. + + - Above text taken from NXP LPC1850 User Manual. + + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: + Should be "nxp,lpc1850-cgu" +- reg: + Shall define the base and range of the address space + containing clock control registers +- #clock-cells: + Shall have value <1>. The permitted clock-specifier values + are the base clock numbers defined below. +- clocks: + Shall contain a list of phandles for the external input + sources to the CGU. The list shall be in the following + order: xtal, 32khz, enet_rx_clk, enet_tx_clk, gp_clkin. +- clock-indices: + Shall be an ordered list of numbers defining the base clock + number provided by the CGU. +- clock-output-names: + Shall be an ordered list of strings defining the names of + the clocks provided by the CGU. + +Which base clocks that are available on the CGU depends on the +specific LPC part. Base clocks are numbered from 0 to 27. + +Number: Name: Description: + 0 BASE_SAFE_CLK Base safe clock (always on) for WWDT + 1 BASE_USB0_CLK Base clock for USB0 + 2 BASE_PERIPH_CLK Base clock for Cortex-M0SUB subsystem, + SPI, and SGPIO + 3 BASE_USB1_CLK Base clock for USB1 + 4 BASE_CPU_CLK System base clock for ARM Cortex-M core + and APB peripheral blocks #0 and #2 + 5 BASE_SPIFI_CLK Base clock for SPIFI + 6 BASE_SPI_CLK Base clock for SPI + 7 BASE_PHY_RX_CLK Base clock for Ethernet PHY Receive clock + 8 BASE_PHY_TX_CLK Base clock for Ethernet PHY Transmit clock + 9 BASE_APB1_CLK Base clock for APB peripheral block # 1 +10 BASE_APB3_CLK Base clock for APB peripheral block # 3 +11 BASE_LCD_CLK Base clock for LCD +12 BASE_ADCHS_CLK Base clock for ADCHS +13 BASE_SDIO_CLK Base clock for SD/MMC +14 BASE_SSP0_CLK Base clock for SSP0 +15 BASE_SSP1_CLK Base clock for SSP1 +16 BASE_UART0_CLK Base clock for UART0 +17 BASE_UART1_CLK Base clock for UART1 +18 BASE_UART2_CLK Base clock for UART2 +19 BASE_UART3_CLK Base clock for UART3 +20 BASE_OUT_CLK Base clock for CLKOUT pin +24-21 - Reserved +25 BASE_AUDIO_CLK Base clock for audio system (I2S) +26 BASE_CGU_OUT0_CLK Base clock for CGU_OUT0 clock output +27 BASE_CGU_OUT1_CLK Base clock for CGU_OUT1 clock output + +BASE_PERIPH_CLK and BASE_SPI_CLK is only available on LPC43xx. +BASE_ADCHS_CLK is only available on LPC4370. + + +Example board file: + +/ { + clocks { + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + xtal32: xtal32 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + enet_rx_clk: enet_rx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_rx_clk"; + }; + + enet_tx_clk: enet_tx_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "enet_tx_clk"; + }; + + gp_clkin: gp_clkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "gp_clkin"; + }; + }; + + soc { + cgu: clock-controller@40050000 { + compatible = "nxp,lpc1850-cgu"; + reg = <0x40050000 0x1000>; + #clock-cells = <1>; + clocks = <&xtal>, <&creg_clk 1>, <&enet_rx_clk>, <&enet_tx_clk>, <&gp_clkin>; + }; + + /* A CGU and CCU clock consumer */ + lcdc: lcdc@40008000 { + ... + clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; + clock-names = "clcdclk", "apb_pclk"; + ... + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/clock/marvell,berlin.txt b/kernel/Documentation/devicetree/bindings/clock/marvell,berlin.txt new file mode 100644 index 000000000..c611c495f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/marvell,berlin.txt @@ -0,0 +1,31 @@ +Device Tree Clock bindings for Marvell Berlin + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Clock related registers are spread among the chip control registers. Berlin +clock node should be a sub-node of the chip controller node. Marvell Berlin2 +(BG2, BG2CD, BG2Q) SoCs share the same IP for PLLs and clocks, with some +minor differences in features and register layout. + +Required properties: +- compatible: must be "marvell,berlin2-clk" or "marvell,berlin2q-clk" +- #clock-cells: must be 1 +- clocks: must be the input parent clock phandle +- clock-names: name of the input parent clock + Allowed clock-names for the reference clocks are + "refclk" for the SoCs oscillator input on all SoCs, + and SoC-specific input clocks for + BG2/BG2CD: "video_ext0" for the external video clock input + + +Example: + +chip_clk: clock { + compatible = "marvell,berlin2q-clk"; + + #clock-cells = <1>; + clocks = <&refclk>; + clock-names = "refclk"; +}; diff --git a/kernel/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt b/kernel/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt new file mode 100644 index 000000000..809c5a2d8 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/marvell,pxa1928.txt @@ -0,0 +1,21 @@ +* Marvell PXA1928 Clock Controllers + +The PXA1928 clock subsystem generates and supplies clock to various +controllers within the PXA1928 SoC. The PXA1928 contains 3 clock controller +blocks called APMU, MPMU, and APBC roughly corresponding to internal buses. + +Required Properties: + +- compatible: should be one of the following. + - "marvell,pxa1928-apmu" - APMU controller compatible + - "marvell,pxa1928-mpmu" - MPMU controller compatible + - "marvell,pxa1928-apbc" - APBC controller compatible +- reg: physical base address of the clock controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Each clock is assigned an identifier and client nodes use the clock controller +phandle and this identifier to specify the clock which they consume. + +All these identifiers can be found in <dt-bindings/clock/marvell,pxa1928.h>. diff --git a/kernel/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/kernel/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt new file mode 100644 index 000000000..52b457c23 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt @@ -0,0 +1,83 @@ +Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC + +Required properties: +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names. +- clock-names: Should contain the following: + "cpu" - The multiplexer for clock input of CPU cluster. + "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock + source (usually MAINPLL) when the original CPU PLL is under + transition and not stable yet. + Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for + generic clock consumer properties. +- proc-supply: Regulator for Vproc of CPU cluster. + +Optional properties: +- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver + needs to do "voltage tracking" to step by step scale up/down Vproc and + Vsram to fit SoC specific needs. When absent, the voltage scaling + flow is handled by hardware, hence no software "voltage tracking" is + needed. + +Example: +-------- + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA53SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x100>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x101>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&infracfg CLK_INFRA_CA57SEL>, + <&apmixedsys CLK_APMIXED_MAINPLL>; + clock-names = "cpu", "intermediate"; + }; + + &cpu0 { + proc-supply = <&mt6397_vpca15_reg>; + }; + + &cpu1 { + proc-supply = <&mt6397_vpca15_reg>; + }; + + &cpu2 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; + }; + + &cpu3 { + proc-supply = <&da9211_vcpu_reg>; + sram-supply = <&mt6397_vsramca7_reg>; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/kernel/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt index 31c7c0c1c..660e64912 100644 --- a/kernel/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt +++ b/kernel/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt @@ -19,6 +19,7 @@ ID Clock Peripheral 9 pex1 PCIe Cntrl 1 15 sata0 SATA Host 0 17 sdio SDHCI Host +23 crypto CESA (crypto engine) 25 tdm Time Division Mplx 28 ddr DDR Cntrl 30 sata1 SATA Host 0 diff --git a/kernel/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/kernel/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt index c6620bc96..7f02fb4ca 100644 --- a/kernel/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt +++ b/kernel/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt @@ -20,15 +20,38 @@ Required properties : - #reset-cells : Should be 1. In clock consumers, this cell represents the bit number in the CAR's array of CLK_RST_CONTROLLER_RST_DEVICES_* registers. +- nvidia,external-memory-controller : phandle of the EMC driver. + +The node should contain a "emc-timings" subnode for each supported RAM type (see +field RAM_CODE in register PMC_STRAPPING_OPT_A). + +Required properties for "emc-timings" nodes : +- nvidia,ram-code : Should contain the value of RAM_CODE this timing set + is used for. + +Each "emc-timings" node should contain a "timing" subnode for every supported +EMC clock rate. + +Required properties for "timing" nodes : +- clock-frequency : Should contain the memory clock rate to which this timing +relates. +- nvidia,parent-clock-frequency : Should contain the rate at which the current +parent of the EMC clock should be running at this timing. +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - emc-parent : the clock that should be the parent of the EMC clock at this +timing. Example SoC include file: / { - tegra_car: clock { + tegra_car: clock@60006000 { compatible = "nvidia,tegra124-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + nvidia,external-memory-controller = <&emc>; }; usb@c5004000 { @@ -62,4 +85,23 @@ Example board file: &tegra_car { clocks = <&clk_32k> <&osc>; }; + + clock@60006000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + }; + }; }; diff --git a/kernel/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/kernel/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt new file mode 100644 index 000000000..ee7e5fd4a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt @@ -0,0 +1,79 @@ +NVIDIA Tegra124 DFLL FCPU clocksource + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +The DFLL IP block on Tegra is a root clocksource designed for clocking +the fast CPU cluster. It consists of a free-running voltage controlled +oscillator connected to the CPU voltage rail (VDD_CPU), and a closed loop +control module that will automatically adjust the VDD_CPU voltage by +communicating with an off-chip PMIC either via an I2C bus or via PWM signals. +Currently only the I2C mode is supported by these bindings. + +Required properties: +- compatible : should be "nvidia,tegra124-dfll" +- reg : Defines the following set of registers, in the order listed: + - registers for the DFLL control logic. + - registers for the I2C output logic. + - registers for the integrated I2C master controller. + - look-up table RAM for voltage register values. +- interrupts: Should contain the DFLL block interrupt. +- clocks: Must contain an entry for each entry in clock-names. + See clock-bindings.txt for details. +- clock-names: Must include the following entries: + - soc: Clock source for the DFLL control logic. + - ref: The closed loop reference clock + - i2c: Clock source for the integrated I2C master. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - dvco: Reset control for the DFLL DVCO. +- #clock-cells: Must be 0. +- clock-output-names: Name of the clock output. +- vdd-cpu-supply: Regulator for the CPU voltage rail that the DFLL + hardware will start controlling. The regulator will be queried for + the I2C register, control values and supported voltages. + +Required properties for the control loop parameters: +- nvidia,sample-rate: Sample rate of the DFLL control loop. +- nvidia,droop-ctrl: See the register CL_DVFS_DROOP_CTRL in the TRM. +- nvidia,force-mode: See the field DFLL_PARAMS_FORCE_MODE in the TRM. +- nvidia,cf: Numeric value, see the field DFLL_PARAMS_CF_PARAM in the TRM. +- nvidia,ci: Numeric value, see the field DFLL_PARAMS_CI_PARAM in the TRM. +- nvidia,cg: Numeric value, see the field DFLL_PARAMS_CG_PARAM in the TRM. + +Optional properties for the control loop parameters: +- nvidia,cg-scale: Boolean value, see the field DFLL_PARAMS_CG_SCALE in the TRM. + +Required properties for I2C mode: +- nvidia,i2c-fs-rate: I2C transfer rate, if using full speed mode. + +Example: + +clock@0,70110000 { + compatible = "nvidia,tegra124-dfll"; + reg = <0 0x70110000 0 0x100>, /* DFLL control */ + <0 0x70110000 0 0x100>, /* I2C output control */ + <0 0x70110100 0 0x100>, /* Integrated I2C controller */ + <0 0x70110200 0 0x100>; /* Look-up table RAM */ + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>, + <&tegra_car TEGRA124_CLK_DFLL_REF>, + <&tegra_car TEGRA124_CLK_I2C5>; + clock-names = "soc", "ref", "i2c"; + resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>; + reset-names = "dvco"; + #clock-cells = <0>; + clock-output-names = "dfllCPU_out"; + vdd-cpu-supply = <&vdd_cpu>; + status = "okay"; + + nvidia,sample-rate = <12500>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,cf = <10>; + nvidia,ci = <0>; + nvidia,cg = <2>; + + nvidia,i2c-fs-rate = <400000>; +}; diff --git a/kernel/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt b/kernel/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt new file mode 100644 index 000000000..e0fc2c11d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/qca,ath79-pll.txt @@ -0,0 +1,33 @@ +Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller + +The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB. + +Required Properties: +- compatible: has to be "qca,<soctype>-cpu-intc" and one of the following + fallbacks: + - "qca,ar7100-pll" + - "qca,ar7240-pll" + - "qca,ar9130-pll" + - "qca,ar9330-pll" + - "qca,ar9340-pll" + - "qca,qca9550-pll" +- reg: Base address and size of the controllers memory area +- clock-names: Name of the input clock, has to be "ref" +- clocks: phandle of the external reference clock +- #clock-cells: has to be one + +Optional properties: +- clock-output-names: should be "cpu", "ddr", "ahb" + +Example: + + memory-controller@18050000 { + compatible = "qca,ar9132-ppl", "qca,ar9130-pll"; + reg = <0x18050000 0x20>; + + clock-names = "ref"; + clocks = <&extosc>; + + #clock-cells = <1>; + clock-output-names = "cpu", "ddr", "ahb"; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/kernel/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 54c23f34f..152dfaab2 100644 --- a/kernel/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/kernel/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -18,10 +18,14 @@ Required properties : - #clock-cells : shall contain 1 - #reset-cells : shall contain 1 +Optional properties : +- #power-domain-cells : shall contain 1 + Example: clock-controller@900000 { compatible = "qcom,gcc-msm8960"; reg = <0x900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; }; diff --git a/kernel/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/kernel/Documentation/devicetree/bindings/clock/qcom,mmcc.txt index 29ebf84d2..34e7614d5 100644 --- a/kernel/Documentation/devicetree/bindings/clock/qcom,mmcc.txt +++ b/kernel/Documentation/devicetree/bindings/clock/qcom,mmcc.txt @@ -14,10 +14,14 @@ Required properties : - #clock-cells : shall contain 1 - #reset-cells : shall contain 1 +Optional properties : +- #power-domain-cells : shall contain 1 + Example: clock-controller@4000000 { compatible = "qcom,mmcc-msm8960"; reg = <0x4000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; }; diff --git a/kernel/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/kernel/Documentation/devicetree/bindings/clock/qoriq-clock.txt index df4a259a6..16a3ec433 100644 --- a/kernel/Documentation/devicetree/bindings/clock/qoriq-clock.txt +++ b/kernel/Documentation/devicetree/bindings/clock/qoriq-clock.txt @@ -1,6 +1,6 @@ * Clock Block on Freescale QorIQ Platforms -Freescale qoriq chips take primary clocking input from the external +Freescale QorIQ chips take primary clocking input from the external SYSCLK signal. The SYSCLK input (frequency) is multiplied using multiple phase locked loops (PLL) to create a variety of frequencies which can then be passed to a variety of internal logic, including @@ -13,14 +13,16 @@ which the chip complies. Chassis Version Example Chips --------------- ------------- 1.0 p4080, p5020, p5040 -2.0 t4240, b4860, t1040 +2.0 t4240, b4860 1. Clock Block Binding Required properties: -- compatible: Should contain a specific clock block compatible string - and a single chassis clock compatible string. - Clock block strings include, but not limited to, one of the: +- compatible: Should contain a chip-specific clock block compatible + string and (if applicable) may contain a chassis-version clock + compatible string. + + Chip-specific strings are of the form "fsl,<chip>-clockgen", such as: * "fsl,p2041-clockgen" * "fsl,p3041-clockgen" * "fsl,p4080-clockgen" @@ -30,15 +32,14 @@ Required properties: * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" * "fsl,ls1021a-clockgen" - Chassis clock strings include: + Chassis-version clock strings include: * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks - reg: Describes the address of the device's resources within the address space defined by its parent bus, and resource zero represents the clock register set -- clock-frequency: Input system clock frequency -Recommended properties: +Optional properties: - ranges: Allows valid translation between child's address space and parent's. Must be present if the device has sub-nodes. - #address-cells: Specifies the number of cells used to represent @@ -47,8 +48,46 @@ Recommended properties: - #size-cells: Specifies the number of cells used to represent the size of an address. Must be present if the device has sub-nodes and set to 1 if present +- clock-frequency: Input system clock frequency (SYSCLK) +- clocks: If clock-frequency is not specified, sysclk may be provided + as an input clock. Either clock-frequency or clocks must be + provided. + +2. Clock Provider + +The clockgen node should act as a clock provider, though in older device +trees the children of the clockgen node are the clock providers. + +When the clockgen node is a clock provider, #clock-cells = <2>. +The first cell of the clock specifier is the clock type, and the +second cell is the clock index for the specified type. + + Type# Name Index Cell + 0 sysclk must be 0 + 1 cmux index (n in CLKCnCSR) + 2 hwaccel index (n in CLKCGnHWACSR) + 3 fman 0 for fm1, 1 for fm2 + 4 platform pll 0=pll, 1=pll/2, 2=pll/3, 3=pll/4 + +3. Example + + clockgen: global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + clock-frequency = <133333333>; + reg = <0xe1000 0x1000>; + #clock-cells = <2>; + }; + + fman@400000 { + ... + clocks = <&clockgen 3 0>; + ... + }; +} +4. Legacy Child Nodes -2. Clock Provider/Consumer Binding +NOTE: These nodes are deprecated. Kernels should continue to support +device trees with these nodes, but new device trees should not use them. Most of the bindings are from the common clock binding[1]. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -82,7 +121,7 @@ Recommended properties: - reg: Should be the offset and length of clock block base address. The length should be 4. -Example for clock block and clock provider: +Legacy Example: / { clockgen: global-utilities@e1000 { compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; @@ -142,7 +181,7 @@ Example for clock block and clock provider: }; }; -Example for clock consumer: +Example for legacy clock consumer: / { cpu0: PowerPC,e5500@0 { diff --git a/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt index 054f65f93..38dcf0370 100644 --- a/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt +++ b/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt @@ -1,7 +1,7 @@ * Renesas CPG DIV6 Clock The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse -Generator (CPG). They clock input is divided by a configurable factor from 1 +Generator (CPG). Their clock input is divided by a configurable factor from 1 to 64. Required Properties: @@ -10,9 +10,11 @@ Required Properties: - "renesas,r8a73a4-div6-clock" for R8A73A4 (R-Mobile APE6) DIV6 clocks - "renesas,r8a7740-div6-clock" for R8A7740 (R-Mobile A1) DIV6 clocks - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks - - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks + - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2-W) DIV6 clocks + - "renesas,r8a7793-div6-clock" for R8A7793 (R-Car M2-N) DIV6 clocks + - "renesas,r8a7794-div6-clock" for R8A7794 (R-Car E2) DIV6 clocks - "renesas,sh73a0-div6-clock" for SH73A0 (SH-Mobile AG5) DIV6 clocks - - "renesas,cpg-div6-clock" for generic DIV6 clocks + and "renesas,cpg-div6-clock" as a fallback. - reg: Base address and length of the memory resource used by the DIV6 clock - clocks: Reference to the parent clock(s); either one, four, or eight clocks must be specified. For clocks with multiple parents, invalid diff --git a/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt new file mode 100644 index 000000000..59297d34b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -0,0 +1,69 @@ +* Renesas Clock Pulse Generator / Module Standby and Software Reset + +On Renesas ARM SoCs (SH/R-Mobile, R-Car, RZ), the CPG (Clock Pulse Generator) +and MSSR (Module Standby and Software Reset) blocks are intimately connected, +and share the same register block. + +They provide the following functionalities: + - The CPG block generates various core clocks, + - The MSSR block provides two functions: + 1. Module Standby, providing a Clock Domain to control the clock supply + to individual SoC devices, + 2. Reset Control, to perform a software reset of individual SoC devices. + +Required Properties: + - compatible: Must be one of: + - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC + + - reg: Base address and length of the memory resource used by the CPG/MSSR + block + + - clocks: References to external parent clocks, one entry for each entry in + clock-names + - clock-names: List of external parent clock names. Valid names are: + - "extal" (r8a7795) + - "extalr" (r8a7795) + + - #clock-cells: Must be 2 + - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" + and a core clock reference, as defined in + <dt-bindings/clock/*-cpg-mssr.h>. + - For module clocks, the two clock specifier cells must be "CPG_MOD" and + a module number, as defined in the datasheet. + + - #power-domain-cells: Must be 0 + - SoC devices that are part of the CPG/MSSR Clock Domain and can be + power-managed through Module Standby should refer to the CPG device + node in their "power-domains" property, as documented by the generic PM + Domain bindings in + Documentation/devicetree/bindings/power/power_domain.txt. + + +Examples +-------- + + - CPG device node: + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7795-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + + - CPG/MSSR Clock Domain member device node: + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a7795", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>; + clock-names = "sci_ick"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>; + dma-names = "tx", "rx"; + power-domains = <&cpg>; + status = "disabled"; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt index 0a80fa70c..16ed18155 100644 --- a/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +++ b/kernel/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -13,12 +13,14 @@ Required Properties: - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks + - "renesas,r8a7778-mstp-clocks" for R8A7778 (R-Car M1) MSTP gate clocks - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks - - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks + - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2-W) MSTP gate clocks + - "renesas,r8a7793-mstp-clocks" for R8A7793 (R-Car M2-N) MSTP gate clocks - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks - - "renesas,cpg-mstp-clock" for generic MSTP gate clocks + and "renesas,cpg-mstp-clocks" as a fallback. - reg: Base address and length of the I/O mapped registers used by the MSTP clocks. The first register is the clock control register and is mandatory. The second register is the clock status register and is optional when not diff --git a/kernel/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt b/kernel/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt new file mode 100644 index 000000000..36c2b5282 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt @@ -0,0 +1,24 @@ +* Renesas H8/300 divider clock + +Required Properties: + + - compatible: Must be "renesas,sh73a0-h8300-div-clock" + + - clocks: Reference to the parent clocks ("extal1" and "extal2") + + - #clock-cells: Must be 1 + + - reg: Base address and length of the divide rate selector + + - renesas,width: bit width of selector + +Example +------- + + cclk: cclk { + compatible = "renesas,h8300-div-clock"; + clocks = <&xclk>; + #clock-cells = <0>; + reg = <0xfee01b 2>; + renesas,width = <2>; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt b/kernel/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt new file mode 100644 index 000000000..500cdadbc --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt @@ -0,0 +1,23 @@ +Renesas H8S2678 PLL clock + +This device is Clock multiplyer + +Required Properties: + + - compatible: Must be "renesas,h8s2678-pll-clock" + + - clocks: Reference to the parent clocks + + - #clock-cells: Must be 0 + + - reg: Two rate selector (Multiply / Divide) register address + +Example +------- + + pllclk: pllclk { + compatible = "renesas,h8s2678-pll-clock"; + clocks = <&xclk>; + #clock-cells = <0>; + reg = <0xfee03b 2>, <0xfee045 2>; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/kernel/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt index 2f3747fdc..e4cdaf1cb 100644 --- a/kernel/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt +++ b/kernel/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt @@ -1,7 +1,9 @@ * Renesas R8A7778 Clock Pulse Generator (CPG) The CPG generates core clocks for the R8A7778. It includes two PLLs and -several fixed ratio dividers +several fixed ratio dividers. +The CPG also provides a Clock Domain for SoC devices, in combination with the +CPG Module Stop (MSTP) Clocks. Required Properties: @@ -10,10 +12,18 @@ Required Properties: - #clock-cells: Must be 1 - clock-output-names: The names of the clocks. Supported clocks are "plla", "pllb", "b", "out", "p", "s", and "s1". + - #power-domain-cells: Must be 0 +SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed +through an MSTP clock should refer to the CPG device node in their +"power-domains" property, as documented by the generic PM domain bindings in +Documentation/devicetree/bindings/power/power_domain.txt. -Example -------- + +Examples +-------- + + - CPG device node: cpg_clocks: cpg_clocks@ffc80000 { compatible = "renesas,r8a7778-cpg-clocks"; @@ -22,4 +32,17 @@ Example clocks = <&extal_clk>; clock-output-names = "plla", "pllb", "b", "out", "p", "s", "s1"; + #power-domain-cells = <0>; + }; + + + - CPG/MSTP Clock Domain member device node: + + sdhi0: sd@ffe4c000 { + compatible = "renesas,sdhi-r8a7778"; + reg = <0xffe4c000 0x100>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7778_CLK_SDHI0>; + power-domains = <&cpg_clocks>; + status = "disabled"; }; diff --git a/kernel/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt b/kernel/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt index ed3c8cb12..8c81547c2 100644 --- a/kernel/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt +++ b/kernel/Documentation/devicetree/bindings/clock/renesas,r8a7779-cpg-clocks.txt @@ -1,7 +1,9 @@ * Renesas R8A7779 Clock Pulse Generator (CPG) The CPG generates core clocks for the R8A7779. It includes one PLL and -several fixed ratio dividers +several fixed ratio dividers. +The CPG also provides a Clock Domain for SoC devices, in combination with the +CPG Module Stop (MSTP) Clocks. Required Properties: @@ -12,16 +14,36 @@ Required Properties: - #clock-cells: Must be 1 - clock-output-names: The names of the clocks. Supported clocks are "plla", "z", "zs", "s", "s1", "p", "b", "out". + - #power-domain-cells: Must be 0 +SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed +through an MSTP clock should refer to the CPG device node in their +"power-domains" property, as documented by the generic PM domain bindings in +Documentation/devicetree/bindings/power/power_domain.txt. -Example -------- + +Examples +-------- + + - CPG device node: cpg_clocks: cpg_clocks@ffc80000 { compatible = "renesas,r8a7779-cpg-clocks"; - reg = <0 0xffc80000 0 0x30>; + reg = <0xffc80000 0x30>; clocks = <&extal_clk>; #clock-cells = <1>; clock-output-names = "plla", "z", "zs", "s", "s1", "p", "b", "out"; + #power-domain-cells = <0>; + }; + + + - CPG/MSTP Clock Domain member device node: + + sata: sata@fc600000 { + compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; + reg = <0xfc600000 0x2000>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7779_CLK_SATA>; + power-domains = <&cpg_clocks>; }; diff --git a/kernel/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/kernel/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt index b02944fba..2a9a8edc8 100644 --- a/kernel/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +++ b/kernel/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -2,6 +2,8 @@ The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs and several fixed ratio dividers. +The CPG also provides a Clock Domain for SoC devices, in combination with the +CPG Module Stop (MSTP) Clocks. Required Properties: @@ -10,7 +12,7 @@ Required Properties: - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG - - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG + and "renesas,rcar-gen2-cpg-clocks" as a fallback. - reg: Base address and length of the memory resource used by the CPG @@ -20,10 +22,18 @@ Required Properties: - clock-output-names: The names of the clocks. Supported clocks are "main", "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and "adsp" + - #power-domain-cells: Must be 0 +SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed +through an MSTP clock should refer to the CPG device node in their +"power-domains" property, as documented by the generic PM domain bindings in +Documentation/devicetree/bindings/power/power_domain.txt. -Example -------- + +Examples +-------- + + - CPG device node: cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7790-cpg-clocks", @@ -34,4 +44,16 @@ Example clock-output-names = "main", "pll0, "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", "adsp"; + #power-domain-cells = <0>; + }; + + + - CPG/MSTP Clock Domain member device node: + + thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; + power-domains = <&cpg_clocks>; }; diff --git a/kernel/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/kernel/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index 98a257492..bb51a33a1 100644 --- a/kernel/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/kernel/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -2,22 +2,32 @@ The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable CPU and GPU clocks, and several fixed ratio dividers. +The CPG also provides a Clock Domain for SoC devices, in combination with the +CPG Module Stop (MSTP) Clocks. Required Properties: - compatible: Must be one of - "renesas,r7s72100-cpg-clocks" for the r7s72100 CPG - - "renesas,rz-cpg-clocks" for the generic RZ CPG + and "renesas,rz-cpg-clocks" as a fallback. - reg: Base address and length of the memory resource used by the CPG - clocks: References to possible parent clocks. Order must match clock modes in the datasheet. For the r7s72100, this is extal, usb_x1. - #clock-cells: Must be 1 - clock-output-names: The names of the clocks. Supported clocks are "pll", "i", and "g" + - #power-domain-cells: Must be 0 +SoC devices that are part of the CPG/MSTP Clock Domain and can be power-managed +through an MSTP clock should refer to the CPG device node in their +"power-domains" property, as documented by the generic PM domain bindings in +Documentation/devicetree/bindings/power/power_domain.txt. -Example -------- + +Examples +-------- + + - CPG device node: cpg_clocks: cpg_clocks@fcfe0000 { #clock-cells = <1>; @@ -26,4 +36,19 @@ Example reg = <0xfcfe0000 0x18>; clocks = <&extal_clk>, <&usb_x1_clk>; clock-output-names = "pll", "i", "g"; + #power-domain-cells = <0>; + }; + + + - CPG/MSTP Clock Domain member device node: + + mtu2: timer@fcff0000 { + compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; + reg = <0xfcff0000 0x400>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tgi0a"; + clocks = <&mstp3_clks R7S72100_CLK_MTU2>; + clock-names = "fck"; + power-domains = <&cpg_clocks>; + status = "disabled"; }; diff --git a/kernel/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/kernel/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt new file mode 100644 index 000000000..7c8bbcfed --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt @@ -0,0 +1,61 @@ +* Rockchip RK3368 Clock and Reset Unit + +The RK3368 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: should be "rockchip,rk3368-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing, pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional, + - "ext_isp" - external ISP clock - optional, + - "ext_jtag" - external JTAG clock - optional + - "ext_vip" - external VIP clock - optional, + - "usbotg_out" - output clock of the pll in the otg phy + +Example: Clock controller node: + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3368-cru"; + reg = <0x0 0xff760000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@10124000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10124000 0x400>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clocks = <&cru SCLK_UART0>; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/silabs,si514.txt b/kernel/Documentation/devicetree/bindings/clock/silabs,si514.txt new file mode 100644 index 000000000..ea1a9dbc6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/silabs,si514.txt @@ -0,0 +1,24 @@ +Binding for Silicon Labs 514 programmable I2C clock generator. + +Reference +This binding uses the common clock binding[1]. Details about the device can be +found in the datasheet[2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Si514 datasheet + http://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf + +Required properties: + - compatible: Shall be "silabs,si514" + - reg: I2C device address. + - #clock-cells: From common clock bindings: Shall be 0. + +Optional properties: + - clock-output-names: From common clock bindings. Recommended to be "si514". + +Example: + si514: clock-generator@55 { + reg = <0x55>; + #clock-cells = <0>; + compatible = "silabs,si514"; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/kernel/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt new file mode 100644 index 000000000..fee3205cd --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt @@ -0,0 +1,65 @@ +STMicroelectronics STM32 Reset and Clock Controller +=================================================== + +The RCC IP is both a reset and a clock controller. This documentation only +describes the clock part. + +Please also refer to clock-bindings.txt in this directory for common clock +controller binding usage. + +Required properties: +- compatible: Should be "st,stm32f42xx-rcc" +- reg: should be register base and length as documented in the + datasheet +- #clock-cells: 2, device nodes should specify the clock in their "clocks" + property, containing a phandle to the clock device node, an index selecting + between gated clocks and other clocks and an index specifying the clock to + use. + +Example: + + rcc: rcc@40023800 { + #clock-cells = <2> + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + }; + +Specifying gated clocks +======================= + +The primary index must be set to 0. + +The secondary index is the bit number within the RCC register bank, starting +from the first RCC clock enable register (RCC_AHB1ENR, address offset 0x30). + +It is calculated as: index = register_offset / 4 * 32 + bit_offset. +Where bit_offset is the bit offset within the register (LSB is 0, MSB is 31). + +Example: + + /* Gated clock, AHB1 bit 0 (GPIOA) */ + ... { + clocks = <&rcc 0 0> + }; + + /* Gated clock, AHB2 bit 4 (CRYP) */ + ... { + clocks = <&rcc 0 36> + }; + +Specifying other clocks +======================= + +The primary index must be set to 1. + +The secondary index is bound with the following magic numbers: + + 0 SYSTICK + 1 FCLK + +Example: + + /* Misc clock, FCLK */ + ... { + clocks = <&rcc 1 1> + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/kernel/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt index efb51cf0c..844b3a097 100644 --- a/kernel/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +++ b/kernel/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt @@ -21,8 +21,9 @@ Required properties: "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32" "st,stih407-plls-c32-a0", "st,clkgen-plls-c32" "st,stih407-plls-c32-a9", "st,clkgen-plls-c32" - "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32" - "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32" + "sst,plls-c32-cx_0", "st,clkgen-plls-c32" + "sst,plls-c32-cx_1", "st,clkgen-plls-c32" + "st,stih418-plls-c28-a9", "st,clkgen-plls-c32" "st,stih415-gpu-pll-c32", "st,clkgengpu-pll-c32" "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32" diff --git a/kernel/Documentation/devicetree/bindings/clock/sunxi.txt b/kernel/Documentation/devicetree/bindings/clock/sunxi.txt index 4fa11af3d..8a47b77ab 100644 --- a/kernel/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/kernel/Documentation/devicetree/bindings/clock/sunxi.txt @@ -67,6 +67,7 @@ Required properties: "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13 "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31 + "allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23 "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 diff --git a/kernel/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/kernel/Documentation/devicetree/bindings/clock/ti,cdce925.txt new file mode 100644 index 000000000..4c7669ad6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/ti,cdce925.txt @@ -0,0 +1,42 @@ +Binding for TO CDCE925 programmable I2C clock synthesizers. + +Reference +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] http://www.ti.com/product/cdce925 + +The driver provides clock sources for each output Y1 through Y5. + +Required properties: + - compatible: Shall be "ti,cdce925" + - reg: I2C device address. + - clocks: Points to a fixed parent clock that provides the input frequency. + - #clock-cells: From common clock bindings: Shall be 1. + +Optional properties: + - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a + board, or to compensate for external influences. + +For both PLL1 and PLL2 an optional child node can be used to specify spread +spectrum clocking parameters for a board. + - spread-spectrum: SSC mode as defined in the data sheet. + - spread-spectrum-center: Use "centered" mode instead of "max" mode. When + present, the clock runs at the requested frequency on average. Otherwise + the requested frequency is the maximum value of the SCC range. + + +Example: + + clockgen: cdce925pw@64 { + compatible = "cdce925"; + reg = <0x64>; + clocks = <&xtal_27Mhz>; + #clock-cells = <1>; + xtal-load-pf = <5>; + /* PLL options to get SSC 1% centered */ + PLL2 { + spread-spectrum = <4>; + spread-spectrum-center; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/clock/ux500.txt b/kernel/Documentation/devicetree/bindings/clock/ux500.txt new file mode 100644 index 000000000..e52bd4b72 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/ux500.txt @@ -0,0 +1,64 @@ +Clock bindings for ST-Ericsson Ux500 clocks + +Required properties : +- compatible : shall contain only one of the following: + "stericsson,u8500-clks" + "stericsson,u8540-clks" + "stericsson,u9540-clks" +- reg : shall contain base register location and length for + CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of + CLKRST4, which does not exist. + +Required subnodes: +- prcmu-clock: a subnode with one clock cell for PRCMU (power, + reset, control unit) clocks. The cell indicates which PRCMU + clock in the prcmu-clock node the consumer wants to use. +- prcc-periph-clock: a subnode with two clock cells for + PRCC (programmable reset- and clock controller) peripheral clocks. + The first cell indicates which PRCC block the consumer + wants to use, possible values are 1, 2, 3, 5, 6. The second + cell indicates which clock inside the PRCC block it wants, + possible values are 0 thru 31. +- prcc-kernel-clock: a subnode with two clock cells for + PRCC (programmable reset- and clock controller) kernel clocks + The first cell indicates which PRCC block the consumer + wants to use, possible values are 1, 2, 3, 5, 6. The second + cell indicates which clock inside the PRCC block it wants, + possible values are 0 thru 31. +- rtc32k-clock: a subnode with zero clock cells for the 32kHz + RTC clock. +- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster + with zero clock cells. + +Example: + +clocks { + compatible = "stericsson,u8500-clks"; + /* + * Registers for the CLKRST block on peripheral + * groups 1, 2, 3, 5, 6, + */ + reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>, + <0x8000f000 0x1000>, <0xa03ff000 0x1000>, + <0xa03cf000 0x1000>; + + prcmu_clk: prcmu-clock { + #clock-cells = <1>; + }; + + prcc_pclk: prcc-periph-clock { + #clock-cells = <2>; + }; + + prcc_kclk: prcc-kernel-clock { + #clock-cells = <2>; + }; + + rtc_clk: rtc32k-clock { + #clock-cells = <0>; + }; + + smp_twd_clk: smp-twd-clock { + #clock-cells = <0>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/kernel/Documentation/devicetree/bindings/clock/zx296702-clk.txt new file mode 100644 index 000000000..750442b65 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/clock/zx296702-clk.txt @@ -0,0 +1,35 @@ +Device Tree Clock bindings for ZTE zx296702 + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "zte,zx296702-topcrm-clk": + zx296702 top clock selection, divider and gating + + "zte,zx296702-lsp0crpm-clk" and + "zte,zx296702-lsp1crpm-clk": + zx296702 device level clock selection and gating + +- reg: Address and length of the register set + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h +for the full list of zx296702 clock IDs. + + +topclk: topcrm@0x09800000 { + compatible = "zte,zx296702-topcrm-clk"; + reg = <0x09800000 0x1000>; + #clock-cells = <1>; +}; + +uart0: serial@0x09405000 { + compatible = "zte,zx296702-uart"; + reg = <0x09405000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lsp1clk ZX296702_UART0_PCLK>; + status = "disabled"; +}; diff --git a/kernel/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt b/kernel/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt new file mode 100644 index 000000000..b1669fbfb --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt @@ -0,0 +1,44 @@ +Tegra124 CPU frequency scaling driver bindings +---------------------------------------------- + +Both required and optional properties listed below must be defined +under node /cpus/cpu@0. + +Required properties: +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - cpu_g: Clock mux for the fast CPU cluster. + - cpu_lp: Clock mux for the low-power CPU cluster. + - pll_x: Fast PLL clocksource. + - pll_p: Auxiliary PLL used during fast PLL rate changes. + - dfll: Fast DFLL clocksource that also automatically scales CPU voltage. +- vdd-cpu-supply: Regulator for CPU voltage + +Optional properties: +- clock-latency: Specify the possible maximum transition latency for clock, + in unit of nanoseconds. + +Example: +-------- +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + clocks = <&tegra_car TEGRA124_CLK_CCLK_G>, + <&tegra_car TEGRA124_CLK_CCLK_LP>, + <&tegra_car TEGRA124_CLK_PLL_X>, + <&tegra_car TEGRA124_CLK_PLL_P>, + <&dfll>; + clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll"; + clock-latency = <300000>; + vdd-cpu-supply: <&vdd_cpu>; + }; + + <...> +}; diff --git a/kernel/Documentation/devicetree/bindings/crypto/fsl-sec2.txt b/kernel/Documentation/devicetree/bindings/crypto/fsl-sec2.txt index 38988ef13..f0d926bf9 100644 --- a/kernel/Documentation/devicetree/bindings/crypto/fsl-sec2.txt +++ b/kernel/Documentation/devicetree/bindings/crypto/fsl-sec2.txt @@ -1,9 +1,11 @@ -Freescale SoC SEC Security Engines versions 2.x-3.x +Freescale SoC SEC Security Engines versions 1.x-2.x-3.x Required properties: - compatible : Should contain entries for this and backward compatible - SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" + SEC versions, high to low, e.g., "fsl,sec2.1", "fsl,sec2.0" (SEC2/3) + e.g., "fsl,sec1.2", "fsl,sec1.0" (SEC1) + warning: SEC1 and SEC2 are mutually exclusive - reg : Offset and length of the register set for the device - interrupts : the SEC's interrupt number - fsl,num-channels : An integer representing the number of channels diff --git a/kernel/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/kernel/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index e4022776a..adeca34c5 100644 --- a/kernel/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/kernel/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -106,6 +106,18 @@ PROPERTIES to the interrupt parent to which the child domain is being mapped. + - clocks + Usage: required if SEC 4.0 requires explicit enablement of clocks + Value type: <prop_encoded-array> + Definition: A list of phandle and clock specifier pairs describing + the clocks required for enabling and disabling SEC 4.0. + + - clock-names + Usage: required if SEC 4.0 requires explicit enablement of clocks + Value type: <string> + Definition: A list of clock name strings in the same order as the + clocks property. + Note: All other standard properties (see the ePAPR) are allowed but are optional. @@ -120,6 +132,11 @@ EXAMPLE ranges = <0 0x300000 0x10000>; interrupt-parent = <&mpic>; interrupts = <92 2>; + clocks = <&clks IMX6QDL_CLK_CAAM_MEM>, + <&clks IMX6QDL_CLK_CAAM_ACLK>, + <&clks IMX6QDL_CLK_CAAM_IPG>, + <&clks IMX6QDL_CLK_EIM_SLOW>; + clock-names = "mem", "aclk", "ipg", "emi_slow"; }; ===================================================================== @@ -288,12 +305,13 @@ Secure Non-Volatile Storage (SNVS) Node Node defines address range and the associated interrupt for the SNVS function. This function monitors security state information & reports - security violations. + security violations. This also included rtc, + system power off and ON/OFF key. - compatible Usage: required Value type: <string> - Definition: Must include "fsl,sec-v4.0-mon". + Definition: Must include "fsl,sec-v4.0-mon" and "syscon". - reg Usage: required @@ -324,7 +342,7 @@ Secure Non-Volatile Storage (SNVS) Node the child address, parent address, & length. - interrupts - Usage: required + Usage: optional Value type: <prop_encoded-array> Definition: Specifies the interrupts generated by this device. The value of the interrupts property @@ -341,7 +359,7 @@ Secure Non-Volatile Storage (SNVS) Node EXAMPLE sec_mon@314000 { - compatible = "fsl,sec-v4.0-mon"; + compatible = "fsl,sec-v4.0-mon", "syscon"; reg = <0x314000 0x1000>; ranges = <0 0x314000 0x1000>; interrupt-parent = <&mpic>; @@ -358,16 +376,72 @@ Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node Value type: <string> Definition: Must include "fsl,sec-v4.0-mon-rtc-lp". - - reg + - interrupts Usage: required - Value type: <prop-encoded-array> - Definition: A standard property. Specifies the physical - address and length of the SNVS LP configuration registers. + Value type: <prop_encoded-array> + Definition: Specifies the interrupts generated by this + device. The value of the interrupts property + consists of one interrupt specifier. The format + of the specifier is defined by the binding document + describing the node's interrupt parent. + + - regmap + Usage: required + Value type: <phandle> + Definition: this is phandle to the register map node. + + - offset + Usage: option + value type: <u32> + Definition: LP register offset. default it is 0x34. EXAMPLE - sec_mon_rtc_lp@314000 { + sec_mon_rtc_lp@1 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; + interrupts = <93 2>; + regmap = <&snvs>; + offset = <0x34>; + }; + +===================================================================== +System ON/OFF key driver + + The snvs-pwrkey is designed to enable POWER key function which controlled + by SNVS ONOFF, the driver can report the status of POWER key and wakeup + system if pressed after system suspend. + + - compatible: + Usage: required + Value type: <string> + Definition: Mush include "fsl,sec-v4.0-pwrkey". + + - interrupts: + Usage: required + Value type: <prop_encoded-array> + Definition: The SNVS ON/OFF interrupt number to the CPU(s). + + - linux,keycode: + Usage: option + Value type: <int> + Definition: Keycode to emit, KEY_POWER by default. + + - wakeup-source: + Usage: option + Value type: <boo> + Definition: Button can wake-up the system. + + - regmap: + Usage: required: + Value type: <phandle> + Definition: this is phandle to the register map node. + +EXAMPLE: + snvs-pwrkey@0x020cc000 { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <0 4 0x4> + linux,keycode = <116>; /* KEY_POWER */ + wakeup-source; }; ===================================================================== @@ -443,12 +517,20 @@ FULL EXAMPLE compatible = "fsl,sec-v4.0-mon"; reg = <0x314000 0x1000>; ranges = <0 0x314000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <93 2>; sec_mon_rtc_lp@34 { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - reg = <0x34 0x58>; + regmap = <&sec_mon>; + offset = <0x34>; + interrupts = <93 2>; + }; + + snvs-pwrkey@0x020cc000 { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&sec_mon>; + interrupts = <0 4 0x4>; + linux,keycode = <116>; /* KEY_POWER */ + wakeup-source; }; }; diff --git a/kernel/Documentation/devicetree/bindings/crypto/marvell-cesa.txt b/kernel/Documentation/devicetree/bindings/crypto/marvell-cesa.txt new file mode 100644 index 000000000..c6c6a4a04 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/crypto/marvell-cesa.txt @@ -0,0 +1,45 @@ +Marvell Cryptographic Engines And Security Accelerator + +Required properties: +- compatible: should be one of the following string + "marvell,orion-crypto" + "marvell,kirkwood-crypto" + "marvell,dove-crypto" + "marvell,armada-370-crypto" + "marvell,armada-xp-crypto" + "marvell,armada-375-crypto" + "marvell,armada-38x-crypto" +- reg: base physical address of the engine and length of memory mapped + region. Can also contain an entry for the SRAM attached to the CESA, + but this representation is deprecated and marvell,crypto-srams should + be used instead +- reg-names: "regs". Can contain an "sram" entry, but this representation + is deprecated and marvell,crypto-srams should be used instead +- interrupts: interrupt number +- clocks: reference to the crypto engines clocks. This property is not + required for orion and kirkwood platforms +- clock-names: "cesaX" and "cesazX", X should be replaced by the crypto engine + id. + This property is not required for the orion and kirkwoord + platforms. + "cesazX" clocks are not required on armada-370 platforms +- marvell,crypto-srams: phandle to crypto SRAM definitions + +Optional properties: +- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not + specified the whole SRAM is used (2KB) + + +Examples: + + crypto@90000 { + compatible = "marvell,armada-xp-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>, <49>; + clocks = <&gateclk 23>, <&gateclk 23>; + clock-names = "cesa0", "cesa1"; + marvell,crypto-srams = <&crypto_sram0>, <&crypto_sram1>; + marvell,crypto-sram-size = <0x600>; + status = "okay"; + }; diff --git a/kernel/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/kernel/Documentation/devicetree/bindings/crypto/mv_cesa.txt index 47229b1a5..c0c35f003 100644 --- a/kernel/Documentation/devicetree/bindings/crypto/mv_cesa.txt +++ b/kernel/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -1,20 +1,33 @@ Marvell Cryptographic Engines And Security Accelerator Required properties: -- compatible : should be "marvell,orion-crypto" -- reg : base physical address of the engine and length of memory mapped - region, followed by base physical address of sram and its memory - length -- reg-names : "regs" , "sram"; -- interrupts : interrupt number +- compatible: should be one of the following string + "marvell,orion-crypto" + "marvell,kirkwood-crypto" + "marvell,dove-crypto" +- reg: base physical address of the engine and length of memory mapped + region. Can also contain an entry for the SRAM attached to the CESA, + but this representation is deprecated and marvell,crypto-srams should + be used instead +- reg-names: "regs". Can contain an "sram" entry, but this representation + is deprecated and marvell,crypto-srams should be used instead +- interrupts: interrupt number +- clocks: reference to the crypto engines clocks. This property is only + required for Dove platforms +- marvell,crypto-srams: phandle to crypto SRAM definitions + +Optional properties: +- marvell,crypto-sram-size: SRAM size reserved for crypto operations, if not + specified the whole SRAM is used (2KB) Examples: crypto@30000 { compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0x4000000 0x800>; - reg-names = "regs" , "sram"; + reg = <0x30000 0x10000>; + reg-names = "regs"; interrupts = <22>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x600>; status = "okay"; }; diff --git a/kernel/Documentation/devicetree/bindings/crypto/sun4i-ss.txt b/kernel/Documentation/devicetree/bindings/crypto/sun4i-ss.txt new file mode 100644 index 000000000..5d38e9b70 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/crypto/sun4i-ss.txt @@ -0,0 +1,23 @@ +* Allwinner Security System found on A20 SoC + +Required properties: +- compatible : Should be "allwinner,sun4i-a10-crypto". +- reg: Should contain the Security System register location and length. +- interrupts: Should contain the IRQ line for the Security System. +- clocks : List of clock specifiers, corresponding to ahb and ss. +- clock-names : Name of the functional clock, should be + * "ahb" : AHB gating clock + * "mod" : SS controller clock + +Optional properties: + - resets : phandle + reset specifier pair + - reset-names : must contain "ahb" + +Example: + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + }; diff --git a/kernel/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/kernel/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt index b54bf3a2f..3e36c1d11 100644 --- a/kernel/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt +++ b/kernel/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt @@ -11,15 +11,14 @@ to various devfreq devices. The devfreq devices would use the event data when derterming the current state of each IP. Required properties: -- compatible: Should be "samsung,exynos-ppmu". +- compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2. - reg: physical base address of each PPMU and length of memory mapped region. Optional properties: - clock-names : the name of clock used by the PPMU, "ppmu" - clocks : phandles for clock specified in "clock-names" property -- #clock-cells: should be 1. -Example1 : PPMU nodes in exynos3250.dtsi are listed below. +Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below. ppmu_dmc0: ppmu_dmc0@106a0000 { compatible = "samsung,exynos-ppmu"; @@ -108,3 +107,41 @@ Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below. }; }; }; + +Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below. + + ppmu_d0_cpu: ppmu_d0_cpu@10480000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x10480000 0x2000>; + status = "disabled"; + }; + + ppmu_d0_general: ppmu_d0_general@10490000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x10490000 0x2000>; + status = "disabled"; + }; + + ppmu_d0_rt: ppmu_d0_rt@104a0000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x104a0000 0x2000>; + status = "disabled"; + }; + + ppmu_d1_cpu: ppmu_d1_cpu@104b0000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x104b0000 0x2000>; + status = "disabled"; + }; + + ppmu_d1_general: ppmu_d1_general@104c0000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x104c0000 0x2000>; + status = "disabled"; + }; + + ppmu_d1_rt: ppmu_d1_rt@104d0000 { + compatible = "samsung,exynos-ppmu-v2"; + reg = <0x104d0000 0x2000>; + status = "disabled"; + }; diff --git a/kernel/Documentation/devicetree/bindings/video/arm,pl11x.txt b/kernel/Documentation/devicetree/bindings/display/arm,pl11x.txt index 3e3039a8a..3e3039a8a 100644 --- a/kernel/Documentation/devicetree/bindings/video/arm,pl11x.txt +++ b/kernel/Documentation/devicetree/bindings/display/arm,pl11x.txt diff --git a/kernel/Documentation/devicetree/bindings/drm/armada/marvell,dove-lcd.txt b/kernel/Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt index 46525ea3e..46525ea3e 100644 --- a/kernel/Documentation/devicetree/bindings/drm/armada/marvell,dove-lcd.txt +++ b/kernel/Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt diff --git a/kernel/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/kernel/Documentation/devicetree/bindings/display/atmel,lcdc.txt index ecb8da063..ecb8da063 100644 --- a/kernel/Documentation/devicetree/bindings/video/atmel,lcdc.txt +++ b/kernel/Documentation/devicetree/bindings/display/atmel,lcdc.txt diff --git a/kernel/Documentation/devicetree/bindings/drm/atmel/hlcdc-dc.txt b/kernel/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt index ebc1a914b..ebc1a914b 100644 --- a/kernel/Documentation/devicetree/bindings/drm/atmel/hlcdc-dc.txt +++ b/kernel/Documentation/devicetree/bindings/display/atmel/hlcdc-dc.txt diff --git a/kernel/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/kernel/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt new file mode 100644 index 000000000..56a961aa5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -0,0 +1,65 @@ +Broadcom VC4 (VideoCore4) GPU + +The VC4 device present on the Raspberry Pi includes a display system +with HDMI output and the HVS (Hardware Video Scaler) for compositing +display planes. + +Required properties for VC4: +- compatible: Should be "brcm,bcm2835-vc4" + +Required properties for Pixel Valve: +- compatible: Should be one of "brcm,bcm2835-pixelvalve0", + "brcm,bcm2835-pixelvalve1", or "brcm,bcm2835-pixelvalve2" +- reg: Physical base address and length of the PV's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt + +Required properties for HVS: +- compatible: Should be "brcm,bcm2835-hvs" +- reg: Physical base address and length of the HVS's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt + +Required properties for HDMI +- compatible: Should be "brcm,bcm2835-hdmi" +- reg: Physical base address and length of the two register ranges + ("HDMI" and "HD", in that order) +- interrupts: The interrupt numbers + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +- ddc: phandle of the I2C controller used for DDC EDID probing +- clocks: a) hdmi: The HDMI state machine clock + b) pixel: The pixel clock. + +Optional properties for HDMI: +- hpd-gpios: The GPIO pin for HDMI hotplug detect (if it doesn't appear + as an interrupt/status bit in the HDMI controller + itself). See bindings/pinctrl/brcm,bcm2835-gpio.txt + +Example: +pixelvalve@7e807000 { + compatible = "brcm,bcm2835-pixelvalve2"; + reg = <0x7e807000 0x100>; + interrupts = <2 10>; /* pixelvalve */ +}; + +hvs@7e400000 { + compatible = "brcm,bcm2835-hvs"; + reg = <0x7e400000 0x6000>; + interrupts = <2 1>; +}; + +hdmi: hdmi@7e902000 { + compatible = "brcm,bcm2835-hdmi"; + reg = <0x7e902000 0x600>, + <0x7e808000 0x100>; + interrupts = <2 8>, <2 9>; + ddc = <&i2c2>; + hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + clocks = <&clocks BCM2835_PLLH_PIX>, + <&clocks BCM2835_CLOCK_HSM>; + clock-names = "pixel", "hdmi"; +}; + +vc4: gpu { + compatible = "brcm,bcm2835-vc4"; +}; diff --git a/kernel/Documentation/devicetree/bindings/video/adi,adv7123.txt b/kernel/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt index a6b2b2b8f..a6b2b2b8f 100644 --- a/kernel/Documentation/devicetree/bindings/video/adi,adv7123.txt +++ b/kernel/Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt diff --git a/kernel/Documentation/devicetree/bindings/video/adi,adv7511.txt b/kernel/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 96c25ee01..96c25ee01 100644 --- a/kernel/Documentation/devicetree/bindings/video/adi,adv7511.txt +++ b/kernel/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt diff --git a/kernel/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt b/kernel/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt index a905c1413..dc1452f0d 100644 --- a/kernel/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt +++ b/kernel/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt @@ -14,8 +14,8 @@ Required properties: -port@[X]: SoC specific port nodes with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt, please refer to the SoC specific binding document: - * Documentation/devicetree/bindings/drm/imx/hdmi.txt - * Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt + * Documentation/devicetree/bindings/display/imx/hdmi.txt + * Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt Optional properties - reg-io-width: the width of the reg:1,4, default set to 1 if not present diff --git a/kernel/Documentation/devicetree/bindings/video/bridge/ps8622.txt b/kernel/Documentation/devicetree/bindings/display/bridge/ps8622.txt index c989c3807..c989c3807 100644 --- a/kernel/Documentation/devicetree/bindings/video/bridge/ps8622.txt +++ b/kernel/Documentation/devicetree/bindings/display/bridge/ps8622.txt diff --git a/kernel/Documentation/devicetree/bindings/video/bridge/ptn3460.txt b/kernel/Documentation/devicetree/bindings/display/bridge/ptn3460.txt index 361971ba1..361971ba1 100644 --- a/kernel/Documentation/devicetree/bindings/video/bridge/ptn3460.txt +++ b/kernel/Documentation/devicetree/bindings/display/bridge/ptn3460.txt diff --git a/kernel/Documentation/devicetree/bindings/drm/i2c/tda998x.txt b/kernel/Documentation/devicetree/bindings/display/bridge/tda998x.txt index e9e4bce40..e9e4bce40 100644 --- a/kernel/Documentation/devicetree/bindings/drm/i2c/tda998x.txt +++ b/kernel/Documentation/devicetree/bindings/display/bridge/tda998x.txt diff --git a/kernel/Documentation/devicetree/bindings/video/thine,thc63lvdm83d b/kernel/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt index 527e236e9..527e236e9 100644 --- a/kernel/Documentation/devicetree/bindings/video/thine,thc63lvdm83d +++ b/kernel/Documentation/devicetree/bindings/display/bridge/thine,thc63lvdm83d.txt diff --git a/kernel/Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt b/kernel/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt index 6fc3c6ade..d685be898 100644 --- a/kernel/Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt +++ b/kernel/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt @@ -6,7 +6,7 @@ Required properties: location and size of the framebuffer memory. - clocks : phandle + clock specifier pair of the FB reference clock. - display : phandle to a display node as described in - Documentation/devicetree/bindings/video/display-timing.txt. + Documentation/devicetree/bindings/display/display-timing.txt. Additionally, the display node has to define properties: - bits-per-pixel: Bits per pixel. - ac-prescale : LCD AC bias frequency. This frequency is the required diff --git a/kernel/Documentation/devicetree/bindings/video/analog-tv-connector.txt b/kernel/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt index 0c0970c21..0c0970c21 100644 --- a/kernel/Documentation/devicetree/bindings/video/analog-tv-connector.txt +++ b/kernel/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt diff --git a/kernel/Documentation/devicetree/bindings/video/dvi-connector.txt b/kernel/Documentation/devicetree/bindings/display/connector/dvi-connector.txt index fc53f7c60..fc53f7c60 100644 --- a/kernel/Documentation/devicetree/bindings/video/dvi-connector.txt +++ b/kernel/Documentation/devicetree/bindings/display/connector/dvi-connector.txt diff --git a/kernel/Documentation/devicetree/bindings/video/hdmi-connector.txt b/kernel/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt index acd5668b1..acd5668b1 100644 --- a/kernel/Documentation/devicetree/bindings/video/hdmi-connector.txt +++ b/kernel/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt diff --git a/kernel/Documentation/devicetree/bindings/video/vga-connector.txt b/kernel/Documentation/devicetree/bindings/display/connector/vga-connector.txt index c727f298e..c727f298e 100644 --- a/kernel/Documentation/devicetree/bindings/video/vga-connector.txt +++ b/kernel/Documentation/devicetree/bindings/display/connector/vga-connector.txt diff --git a/kernel/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt b/kernel/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt new file mode 100644 index 000000000..0fba2ee64 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt @@ -0,0 +1,51 @@ +Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC) + +MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is +not capable to transfer high resoltuion frame data as decon can send. MIC +solves this problem by compressing the frame data by 1/2 before it is +transferred through mipi dsi. The compressed frame data must be uncompressed in +the panel PCB. + +Required properties: +- compatible: value should be "samsung,exynos5433-mic". +- reg: physical base address and length of the MIC registers set and system + register of mic. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: list of clock names sorted in the same order as the clocks + property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0". +- samsung,disp-syscon: the reference node for syscon for DISP block. +- ports: contains a port which is connected to decon node and dsi node. + address-cells and size-cells must 1 and 0, respectively. +- port: contains an endpoint node which is connected to the endpoint in the + decon node or dsi node. The reg value must be 0 and 1 respectively. + +Example: +SoC specific DT entry: +mic: mic@13930000 { + compatible = "samsung,exynos5433-mic"; + reg = <0x13930000 0x48>; + clocks = <&cmu_disp CLK_PCLK_MIC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; + samsung,disp-syscon = <&syscon_disp>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mic_to_decon: endpoint { + remote-endpoint = <&decon_to_mic>; + }; + }; + + port@1 { + reg = <1>; + mic_to_dsi: endpoint { + remote-endpoint = <&dsi_to_mic>; + }; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/kernel/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt new file mode 100644 index 000000000..377afbf51 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt @@ -0,0 +1,65 @@ +Device-Tree bindings for Samsung Exynos SoC display controller (DECON) + +DECON (Display and Enhancement Controller) is the Display Controller for the +Exynos series of SoCs which transfers the image data from a video memory +buffer to an external LCD interface. + +Required properties: +- compatible: value should be "samsung,exynos5433-decon"; +- reg: physical base address and length of the DECON registers set. +- interrupts: should contain a list of all DECON IP block interrupts in the + order: VSYNC, LCD_SYSTEM. The interrupt specifier format + depends on the interrupt controller used. +- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys" + in the same order as they were listed in the interrupts + property. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: list of clock names sorted in the same order as the clocks + property. Must contain "aclk_decon", "aclk_smmu_decon0x", + "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk", + "sclk_decon_eclk" +- ports: contains a port which is connected to mic node. address-cells and + size-cells must 1 and 0, respectively. +- port: contains an endpoint node which is connected to the endpoint in the mic + node. The reg value muset be 0. +- i80-if-timings: specify whether the panel which is connected to decon uses + i80 lcd interface or mipi video interface. This node contains + no timing information as that of fimd does. Because there is + no register in decon to specify i80 interface timing value, + it is not needed, but make it remain to use same kind of node + in fimd and exynos7 decon. + +Example: +SoC specific DT entry: +decon: decon@13800000 { + compatible = "samsung,exynos5433-decon"; + reg = <0x13800000 0x2104>; + clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_XIU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_SCLK_DECON_VCLK>, + <&cmu_disp CLK_SCLK_DECON_ECLK>; + clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x", + "pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk"; + interrupt-names = "vsync", "lcd_sys"; + interrupts = <0 202 0>, <0 203 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + decon_to_mic: endpoint { + remote-endpoint = <&mic_to_decon>; + }; + }; + }; +}; + +Board specific DT entry: +&decon { + i80-if-timings { + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/video/exynos7-decon.txt b/kernel/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt index f5f9c8d4a..3938caacf 100644 --- a/kernel/Documentation/devicetree/bindings/video/exynos7-decon.txt +++ b/kernel/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt @@ -38,7 +38,7 @@ Optional Properties: Can be used in case timings cannot be provided otherwise or to override timings provided by the panel. -[1]: Documentation/devicetree/bindings/video/display-timing.txt +[1]: Documentation/devicetree/bindings/display/display-timing.txt Example: diff --git a/kernel/Documentation/devicetree/bindings/video/exynos_dp.txt b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt index 7a3a9cdb8..64693f2eb 100644 --- a/kernel/Documentation/devicetree/bindings/video/exynos_dp.txt +++ b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt @@ -50,7 +50,7 @@ Required properties for dp-controller: number of lanes supported by the panel. LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4 - display-timings: timings for the connected panel as described by - Documentation/devicetree/bindings/video/display-timing.txt + Documentation/devicetree/bindings/display/display-timing.txt Optional properties for dp-controller: -interlaced: diff --git a/kernel/Documentation/devicetree/bindings/video/exynos_dsim.txt b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt index 802aa7ef6..0e6f0c024 100644 --- a/kernel/Documentation/devicetree/bindings/video/exynos_dsim.txt +++ b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt @@ -6,17 +6,19 @@ Required properties: "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ "samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */ "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ + "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */ - reg: physical base address and length of the registers set for the device - interrupts: should contain DSI interrupt - clocks: list of clock specifiers, must contain an entry for each required entry in clock-names - - clock-names: should include "bus_clk"and "pll_clk" entries + - clock-names: should include "bus_clk"and "sclk_mipi" entries + the use of "pll_clk" is deprecated - phys: list of phy specifiers, must contain an entry for each required entry in phy-names - phy-names: should include "dsim" entry - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V) - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V) - - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock + - samsung,pll-clock-frequency: specifies frequency of the oscillator clock - #address-cells, #size-cells: should be set respectively to <1> and <0> according to DSI host bindings (see MIPI DSI bindings [1]) @@ -30,15 +32,24 @@ Video interfaces: Device node can contain video interface port nodes according to [2]. The following are properties specific to those nodes: - port node: - - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port; + port node inbound: + - reg: (required) must be 0. + port node outbound: + - reg: (required) must be 1. - endpoint node of DSI port (reg = 1): + endpoint node connected from mic node (reg = 0): + - remote-endpoint: specifies the endpoint in mic node. This node is required + for Exynos5433 mipi dsi. So mic can access to panel node + thoughout this dsi node. + endpoint node connected to panel node (reg = 1): + - remote-endpoint: specifies the endpoint in panel node. This node is + required in all kinds of exynos mipi dsi to represent + the connection between mipi dsi and panel. - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst mode - samsung,esc-clock-frequency: specifies DSI frequency in escape mode -[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt +[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt [2]: Documentation/devicetree/bindings/media/video-interfaces.txt Example: @@ -48,7 +59,7 @@ Example: reg = <0x11C80000 0x10000>; interrupts = <0 79 0>; clocks = <&clock 286>, <&clock 143>; - clock-names = "bus_clk", "pll_clk"; + clock-names = "bus_clk", "sclk_mipi"; phys = <&mipi_phy 1>; phy-names = "dsim"; vddcore-supply = <&vusb_reg>; @@ -72,7 +83,15 @@ Example: #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + decon_to_mic: endpoint { + remote-endpoint = <&mic_to_decon>; + }; + }; + port@1 { + reg = <1>; dsi_ep: endpoint { reg = <0>; samsung,burst-clock-frequency = <500000000>; diff --git a/kernel/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt index 1fd8cf9cb..1fd8cf9cb 100644 --- a/kernel/Documentation/devicetree/bindings/video/exynos_hdmi.txt +++ b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt diff --git a/kernel/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt index 41eee9715..41eee9715 100644 --- a/kernel/Documentation/devicetree/bindings/video/exynos_hdmiddc.txt +++ b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt diff --git a/kernel/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt index 162f641f7..162f641f7 100644 --- a/kernel/Documentation/devicetree/bindings/video/exynos_hdmiphy.txt +++ b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt diff --git a/kernel/Documentation/devicetree/bindings/video/exynos_mixer.txt b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt index 3e38128f8..3e38128f8 100644 --- a/kernel/Documentation/devicetree/bindings/video/exynos_mixer.txt +++ b/kernel/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt diff --git a/kernel/Documentation/devicetree/bindings/video/samsung-fimd.txt b/kernel/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt index a8bbbde03..27c3ce0db 100644 --- a/kernel/Documentation/devicetree/bindings/video/samsung-fimd.txt +++ b/kernel/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt @@ -82,7 +82,7 @@ in [2]. The following are properties specific to those nodes: 3 - for parallel output, 4 - for write-back interface -[1]: Documentation/devicetree/bindings/video/display-timing.txt +[1]: Documentation/devicetree/bindings/display/display-timing.txt [2]: Documentation/devicetree/bindings/media/video-interfaces.txt Example: diff --git a/kernel/Documentation/devicetree/bindings/display/fsl,dcu.txt b/kernel/Documentation/devicetree/bindings/display/fsl,dcu.txt new file mode 100644 index 000000000..ebf1be9ae --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/fsl,dcu.txt @@ -0,0 +1,22 @@ +Device Tree bindings for Freescale DCU DRM Driver + +Required properties: +- compatible: Should be one of + * "fsl,ls1021a-dcu". + * "fsl,vf610-dcu". + +- reg: Address and length of the register set for dcu. +- clocks: From common clock binding: handle to dcu clock. +- clock-names: From common clock binding: Shall be "dcu". +- big-endian Boolean property, LS1021A DCU registers are big-endian. +- fsl,panel: The phandle to panel node. + +Examples: +dcu: dcu@2ce0000 { + compatible = "fsl,ls1021a-dcu"; + reg = <0x0 0x2ce0000 0x0 0x10000>; + clocks = <&platform_clk 0>; + clock-names = "dcu"; + big-endian; + fsl,panel = <&panel>; +}; diff --git a/kernel/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/kernel/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt index 8c8c2f4e4..00d5f8ea7 100644 --- a/kernel/Documentation/devicetree/bindings/video/fsl,imx-fb.txt +++ b/kernel/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt @@ -9,7 +9,7 @@ Required properties: Required nodes: - display: Phandle to a display node as described in - Documentation/devicetree/bindings/video/display-timing.txt + Documentation/devicetree/bindings/display/display-timing.txt Additional, the display node has to define properties: - bits-per-pixel: Bits per pixel - fsl,pcr: LCDC PCR value diff --git a/kernel/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/kernel/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt index e75f0e549..971c3eedb 100644 --- a/kernel/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt +++ b/kernel/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt @@ -65,8 +65,10 @@ Optional properties: - edid: verbatim EDID data block describing attached display. - ddc: phandle describing the i2c bus handling the display data channel -- port: A port node with endpoint definitions as defined in +- port@[0-1]: Port nodes with endpoint definitions as defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + Port 0 is the input port connected to the IPU display interface, + port 1 is the output port connected to a panel. example: @@ -75,9 +77,29 @@ display@di0 { edid = [edid-data]; interface-pix-fmt = "rgb24"; - port { + port@0 { + reg = <0>; + display_in: endpoint { remote-endpoint = <&ipu_di0_disp0>; }; }; + + port@1 { + reg = <1>; + + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +panel { + ... + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; }; diff --git a/kernel/Documentation/devicetree/bindings/drm/imx/hdmi.txt b/kernel/Documentation/devicetree/bindings/display/imx/hdmi.txt index 1b756cf9a..1b756cf9a 100644 --- a/kernel/Documentation/devicetree/bindings/drm/imx/hdmi.txt +++ b/kernel/Documentation/devicetree/bindings/display/imx/hdmi.txt diff --git a/kernel/Documentation/devicetree/bindings/drm/imx/ldb.txt b/kernel/Documentation/devicetree/bindings/display/imx/ldb.txt index 9a2136643..0a175d991 100644 --- a/kernel/Documentation/devicetree/bindings/drm/imx/ldb.txt +++ b/kernel/Documentation/devicetree/bindings/display/imx/ldb.txt @@ -63,7 +63,7 @@ Required properties: Optional properties (required if display-timings are used): - display-timings : A node that describes the display timings as defined in - Documentation/devicetree/bindings/video/display-timing.txt. + Documentation/devicetree/bindings/display/display-timing.txt. - fsl,data-mapping : should be "spwg" or "jeida" This describes how the color bits are laid out in the serialized LVDS signal. diff --git a/kernel/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt b/kernel/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt new file mode 100644 index 000000000..309c47f25 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt @@ -0,0 +1,34 @@ +PXA LCD Controller +------------------ + +Required properties: + - compatible : one of these + "marvell,pxa2xx-lcdc", + "marvell,pxa270-lcdc", + "marvell,pxa300-lcdc" + - reg : should contain 1 register range (address and length). + - interrupts : framebuffer controller interrupt. + - clocks: phandle to input clocks + +Required nodes: + - port: connection to the LCD panel (see video-interfaces.txt) + This node must have its properties bus-width and remote-endpoint set. + If the panel is not a TFT color panel, then a "lcd-type" property in + the panel should specify the panel type. + This panel node should be in the board dts. + +Example: + lcd-controller@40500000 { + compatible = "marvell,pxa2xx-lcdc"; + reg = <0x44000000 0x10000>; + interrupts = <17>; + clocks = <&clks CLK_LCD>; + status = "okay"; + + port { + lcdc_out: endpoint { + remote-endpoint = <&panel_in>; + bus-width = <16>; + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt b/kernel/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt index 973c27273..973c27273 100644 --- a/kernel/Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt +++ b/kernel/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt diff --git a/kernel/Documentation/devicetree/bindings/display/msm/dsi.txt b/kernel/Documentation/devicetree/bindings/display/msm/dsi.txt new file mode 100644 index 000000000..f344b9e49 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -0,0 +1,149 @@ +Qualcomm Technologies Inc. adreno/snapdragon DSI output + +DSI Controller: +Required properties: +- compatible: + * "qcom,mdss-dsi-ctrl" +- reg: Physical base address and length of the registers of controller +- reg-names: The names of register regions. The following regions are required: + * "dsi_ctrl" +- qcom,dsi-host-index: The ID of DSI controller hardware instance. This should + be 0 or 1, since we have 2 DSI controllers at most for now. +- interrupts: The interrupt signal from the DSI block. +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required: + * "bus_clk" + * "byte_clk" + * "core_clk" + * "core_mmss_clk" + * "iface_clk" + * "mdp_core_clk" + * "pixel_clk" +- vdd-supply: phandle to vdd regulator device node +- vddio-supply: phandle to vdd-io regulator device node +- vdda-supply: phandle to vdda regulator device node +- qcom,dsi-phy: phandle to DSI PHY device node + +Optional properties: +- panel@0: Node of panel connected to this DSI controller. + See files in Documentation/devicetree/bindings/display/panel/ for each supported + panel. +- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is + driving a panel which needs 2 DSI links. +- qcom,master-dsi: Boolean value indicating if the DSI controller is driving + the master link of the 2-DSI panel. +- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is + driving a 2-DSI panel whose 2 links need receive command simultaneously. +- interrupt-parent: phandle to the MDP block if the interrupt signal is routed + through MDP block +- pinctrl-names: the pin control state names; should contain "default" +- pinctrl-0: the default pinctrl state (active) +- pinctrl-n: the "sleep" pinctrl state +- port: DSI controller output port. This contains one endpoint subnode, with its + remote-endpoint set to the phandle of the connected panel's endpoint. + See Documentation/devicetree/bindings/graph.txt for device graph info. + +DSI PHY: +Required properties: +- compatible: Could be the following + * "qcom,dsi-phy-28nm-hpm" + * "qcom,dsi-phy-28nm-lp" + * "qcom,dsi-phy-20nm" +- reg: Physical base address and length of the registers of PLL, PHY and PHY + regulator +- reg-names: The names of register regions. The following regions are required: + * "dsi_pll" + * "dsi_phy" + * "dsi_phy_regulator" +- qcom,dsi-phy-index: The ID of DSI PHY hardware instance. This should + be 0 or 1, since we have 2 DSI PHYs at most for now. +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required: + * "iface_clk" +- vddio-supply: phandle to vdd-io regulator device node + +Optional properties: +- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY + regulator is wanted. + +Example: + mdss_dsi0: qcom,mdss_dsi@fd922800 { + compatible = "qcom,mdss-dsi-ctrl"; + qcom,dsi-host-index = <0>; + interrupt-parent = <&mdss_mdp>; + interrupts = <4 0>; + reg-names = "dsi_ctrl"; + reg = <0xfd922800 0x200>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = + "bus_clk", + "byte_clk", + "core_clk", + "core_mmss_clk", + "iface_clk", + "mdp_core_clk", + "pixel_clk"; + clocks = + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_PCLK0_CLK>; + vdda-supply = <&pma8084_l2>; + vdd-supply = <&pma8084_l22>; + vddio-supply = <&pma8084_l12>; + + qcom,dsi-phy = <&mdss_dsi_phy0>; + + qcom,dual-dsi-mode; + qcom,master-dsi; + qcom,sync-dual-dsi; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_active>; + pinctrl-1 = <&mdss_dsi_suspend>; + + panel: panel@0 { + compatible = "sharp,lq101r1sx01"; + reg = <0>; + link2 = <&secondary>; + + power-supply = <...>; + backlight = <...>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + + port { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + mdss_dsi_phy0: qcom,mdss_dsi_phy@fd922a00 { + compatible = "qcom,dsi-phy-28nm-hpm"; + qcom,dsi-phy-index = <0>; + reg-names = + "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x2b0>, + <0xfd922d80 0x7b>; + clock-names = "iface_clk"; + clocks = <&mmcc MDSS_AHB_CLK>; + vddio-supply = <&pma8084_l12>; + + qcom,dsi-phy-regulator-ldo-mode; + }; diff --git a/kernel/Documentation/devicetree/bindings/display/msm/edp.txt b/kernel/Documentation/devicetree/bindings/display/msm/edp.txt new file mode 100644 index 000000000..3a20f6ea5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/msm/edp.txt @@ -0,0 +1,60 @@ +Qualcomm Technologies Inc. adreno/snapdragon eDP output + +Required properties: +- compatible: + * "qcom,mdss-edp" +- reg: Physical base address and length of the registers of controller and PLL +- reg-names: The names of register regions. The following regions are required: + * "edp" + * "pll_base" +- interrupts: The interrupt signal from the eDP block. +- power-domains: Should be <&mmcc MDSS_GDSC>. +- clocks: device clocks + See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required: + * "core_clk" + * "iface_clk" + * "mdp_core_clk" + * "pixel_clk" + * "link_clk" +- #clock-cells: The value should be 1. +- vdda-supply: phandle to vdda regulator device node +- lvl-vdd-supply: phandle to regulator device node which is used to supply power + to HPD receiving chip +- panel-en-gpios: GPIO pin to supply power to panel. +- panel-hpd-gpios: GPIO pin used for eDP hpd. + + +Optional properties: +- interrupt-parent: phandle to the MDP block if the interrupt signal is routed + through MDP block + +Example: + mdss_edp: qcom,mdss_edp@fd923400 { + compatible = "qcom,mdss-edp"; + reg-names = + "edp", + "pll_base"; + reg = <0xfd923400 0x700>, + <0xfd923a00 0xd4>; + interrupt-parent = <&mdss_mdp>; + interrupts = <12 0>; + power-domains = <&mmcc MDSS_GDSC>; + clock-names = + "core_clk", + "pixel_clk", + "iface_clk", + "link_clk", + "mdp_core_clk"; + clocks = + <&mmcc MDSS_EDPAUX_CLK>, + <&mmcc MDSS_EDPPIXEL_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_EDPLINK_CLK>, + <&mmcc MDSS_MDP_CLK>; + #clock-cells = <1>; + vdda-supply = <&pma8084_l12>; + lvl-vdd-supply = <&lvl_vreg>; + panel-en-gpios = <&tlmm 137 0>; + panel-hpd-gpios = <&tlmm 103 0>; + }; diff --git a/kernel/Documentation/devicetree/bindings/drm/msm/gpu.txt b/kernel/Documentation/devicetree/bindings/display/msm/gpu.txt index 67d0a58db..67d0a58db 100644 --- a/kernel/Documentation/devicetree/bindings/drm/msm/gpu.txt +++ b/kernel/Documentation/devicetree/bindings/display/msm/gpu.txt diff --git a/kernel/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/kernel/Documentation/devicetree/bindings/display/msm/hdmi.txt index a29a55f3d..379ee2ea9 100644 --- a/kernel/Documentation/devicetree/bindings/drm/msm/hdmi.txt +++ b/kernel/Documentation/devicetree/bindings/display/msm/hdmi.txt @@ -2,8 +2,10 @@ Qualcomm adreno/snapdragon hdmi output Required properties: - compatible: one of the following + * "qcom,hdmi-tx-8996" + * "qcom,hdmi-tx-8994" * "qcom,hdmi-tx-8084" - * "qcom,hdmi-tx-8074" + * "qcom,hdmi-tx-8974" * "qcom,hdmi-tx-8660" * "qcom,hdmi-tx-8960" - reg: Physical base address and length of the controller's registers @@ -20,6 +22,10 @@ Required properties: Optional properties: - qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin - qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin +- power-domains: reference to the power domain(s), if available. +- pinctrl-names: the pin control state names; should contain "default" +- pinctrl-0: the default pinctrl state (active) +- pinctrl-1: the "sleep" pinctrl state Example: @@ -31,6 +37,7 @@ Example: reg-names = "core_physical"; reg = <0x04a00000 0x1000>; interrupts = <GIC_SPI 79 0>; + power-domains = <&mmcc MDSS_GDSC>; clock-names = "core_clk", "master_iface_clk", @@ -44,5 +51,8 @@ Example: qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; core-vdda-supply = <&pm8921_hdmi_mvs>; hdmi-mux-supply = <&ext_3p3v>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hpd_active &ddc_active &cec_active>; + pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; }; }; diff --git a/kernel/Documentation/devicetree/bindings/drm/msm/mdp.txt b/kernel/Documentation/devicetree/bindings/display/msm/mdp.txt index 1a0598e52..0833edaba 100644 --- a/kernel/Documentation/devicetree/bindings/drm/msm/mdp.txt +++ b/kernel/Documentation/devicetree/bindings/display/msm/mdp.txt @@ -11,13 +11,14 @@ Required properties: - clock-names: the following clocks are required: * "core_clk" * "iface_clk" - * "lut_clk" * "src_clk" * "hdmi_clk" * "mpd_clk" Optional properties: - gpus: phandle for gpu device +- clock-names: the following clocks are optional: + * "lut_clk" Example: diff --git a/kernel/Documentation/devicetree/bindings/fb/mxsfb.txt b/kernel/Documentation/devicetree/bindings/display/mxsfb.txt index 96ec5179c..96ec5179c 100644 --- a/kernel/Documentation/devicetree/bindings/fb/mxsfb.txt +++ b/kernel/Documentation/devicetree/bindings/display/mxsfb.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/ampire,am800480r3tmqwa1h.txt b/kernel/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt index 83e2cae1c..83e2cae1c 100644 --- a/kernel/Documentation/devicetree/bindings/panel/ampire,am800480r3tmqwa1h.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt diff --git a/kernel/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt new file mode 100644 index 000000000..bae0e2b51 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt @@ -0,0 +1,7 @@ +AU Optronics Corporation 8.0" WUXGA TFT LCD panel + +Required properties: +- compatible: should be "auo,b101ean01" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/kernel/Documentation/devicetree/bindings/panel/auo,b101aw03.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt index 72e088a4f..72e088a4f 100644 --- a/kernel/Documentation/devicetree/bindings/panel/auo,b101aw03.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/auo,b101ean01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt index 3590b0741..3590b0741 100644 --- a/kernel/Documentation/devicetree/bindings/panel/auo,b101ean01.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/auo,b101xtn01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt index 889d511d6..889d511d6 100644 --- a/kernel/Documentation/devicetree/bindings/panel/auo,b101xtn01.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/auo,b116xw03.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt index 690d0a568..690d0a568 100644 --- a/kernel/Documentation/devicetree/bindings/panel/auo,b116xw03.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/auo,b133htn01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt index 302226b5b..302226b5b 100644 --- a/kernel/Documentation/devicetree/bindings/panel/auo,b133htn01.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/auo,b133xtn01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt index 7443b7c76..7443b7c76 100644 --- a/kernel/Documentation/devicetree/bindings/panel/auo,b133xtn01.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/avic,tm070ddh03.txt b/kernel/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt index b6f2f3e8f..b6f2f3e8f 100644 --- a/kernel/Documentation/devicetree/bindings/panel/avic,tm070ddh03.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/chunghwa,claa101wa01a.txt b/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt index f24614e4d..f24614e4d 100644 --- a/kernel/Documentation/devicetree/bindings/panel/chunghwa,claa101wa01a.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/chunghwa,claa101wb03.txt b/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt index 0ab2c05a4..0ab2c05a4 100644 --- a/kernel/Documentation/devicetree/bindings/panel/chunghwa,claa101wb03.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt diff --git a/kernel/Documentation/devicetree/bindings/video/display-timing.txt b/kernel/Documentation/devicetree/bindings/display/panel/display-timing.txt index e1d4a0b59..e1d4a0b59 100644 --- a/kernel/Documentation/devicetree/bindings/video/display-timing.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/display-timing.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/edt,et057090dhu.txt b/kernel/Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt index 4903d7b1d..4903d7b1d 100644 --- a/kernel/Documentation/devicetree/bindings/panel/edt,et057090dhu.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/edt,et070080dh6.txt b/kernel/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt index 20cb38e83..20cb38e83 100644 --- a/kernel/Documentation/devicetree/bindings/panel/edt,et070080dh6.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/edt,etm0700g0dh6.txt b/kernel/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt index ee4b18053..ee4b18053 100644 --- a/kernel/Documentation/devicetree/bindings/panel/edt,etm0700g0dh6.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/foxlink,fl500wvr00-a0t.txt b/kernel/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt index b47f9d87b..b47f9d87b 100644 --- a/kernel/Documentation/devicetree/bindings/panel/foxlink,fl500wvr00-a0t.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt b/kernel/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt index 24b0b6244..24b0b6244 100644 --- a/kernel/Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/hannstar,hsd070pww1.txt b/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt index 7da1d5c03..7da1d5c03 100644 --- a/kernel/Documentation/devicetree/bindings/panel/hannstar,hsd070pww1.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt diff --git a/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt b/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt new file mode 100644 index 000000000..8270319a9 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt @@ -0,0 +1,7 @@ +HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel + +Required properties: +- compatible: should be "hannstar,hsd100pxn1" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/kernel/Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt b/kernel/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt index 04caaae19..04caaae19 100644 --- a/kernel/Documentation/devicetree/bindings/panel/hit,tx23d38vm0caa.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/innolux,at043tn24.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt index 4104226b6..4104226b6 100644 --- a/kernel/Documentation/devicetree/bindings/panel/innolux,at043tn24.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/innolux,g121i1-l01.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt index 2743b07cd..2743b07cd 100644 --- a/kernel/Documentation/devicetree/bindings/panel/innolux,g121i1-l01.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/innolux,n116bge.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt index 081bb939e..081bb939e 100644 --- a/kernel/Documentation/devicetree/bindings/panel/innolux,n116bge.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/innolux,n156bge-l21.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt index 7825844aa..7825844aa 100644 --- a/kernel/Documentation/devicetree/bindings/panel/innolux,n156bge-l21.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/innolux,zj070na-01p.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt index 824f87f15..824f87f15 100644 --- a/kernel/Documentation/devicetree/bindings/panel/innolux,zj070na-01p.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt diff --git a/kernel/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt new file mode 100644 index 000000000..a7588e525 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt @@ -0,0 +1,7 @@ +LG 7" (800x480 pixels) TFT LCD panel + +Required properties: +- compatible: should be "lg,lb070wv8" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/kernel/Documentation/devicetree/bindings/panel/lg,ld070wx3-sl01.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt index 5e649cb9a..5e649cb9a 100644 --- a/kernel/Documentation/devicetree/bindings/panel/lg,ld070wx3-sl01.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt diff --git a/kernel/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt new file mode 100644 index 000000000..824441f4e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt @@ -0,0 +1,19 @@ +LG LG4573 TFT Liquid Crystal Display with SPI control bus + +Required properties: + - compatible: "lg,lg4573" + - reg: address of the panel on the SPI bus + +The panel must obey rules for SPI slave device specified in document [1]. + +[1]: Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: + + lcd_panel: display@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lg,lg4573"; + spi-max-frequency = <10000000>; + reg = <0>; + }; diff --git a/kernel/Documentation/devicetree/bindings/panel/lg,lh500wx1-sd03.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt index a04fd2b2e..a04fd2b2e 100644 --- a/kernel/Documentation/devicetree/bindings/panel/lg,lh500wx1-sd03.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/lg,lp129qe.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt index 9f262e0c5..9f262e0c5 100644 --- a/kernel/Documentation/devicetree/bindings/panel/lg,lp129qe.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt diff --git a/kernel/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt b/kernel/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt index 1a1e653e5..1a1e653e5 100644 --- a/kernel/Documentation/devicetree/bindings/video/lgphilips,lb035q02.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt diff --git a/kernel/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt b/kernel/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt new file mode 100644 index 000000000..8e1914d1e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt @@ -0,0 +1,7 @@ +NEC LCD Technologies,Ltd. WQVGA TFT LCD panel + +Required properties: +- compatible: should be "nec,nl4827hc19-05b" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/kernel/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt b/kernel/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt new file mode 100644 index 000000000..ddf8e211d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt @@ -0,0 +1,7 @@ +OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel + +Required properties: +- compatible: should be "okaya,rs800480t-7x0gp" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/kernel/Documentation/devicetree/bindings/panel/ortustech,com43h4m85ulc.txt b/kernel/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt index de19e9398..de19e9398 100644 --- a/kernel/Documentation/devicetree/bindings/panel/ortustech,com43h4m85ulc.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/panasonic,vvx10f004b00.txt b/kernel/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt index d328b0341..d328b0341 100644 --- a/kernel/Documentation/devicetree/bindings/panel/panasonic,vvx10f004b00.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt diff --git a/kernel/Documentation/devicetree/bindings/video/panel-dpi.txt b/kernel/Documentation/devicetree/bindings/display/panel/panel-dpi.txt index a40180b05..216c894d4 100644 --- a/kernel/Documentation/devicetree/bindings/video/panel-dpi.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/panel-dpi.txt @@ -10,7 +10,7 @@ Optional properties: Required nodes: - "panel-timing" containing video timings - (Documentation/devicetree/bindings/video/display-timing.txt) + (Documentation/devicetree/bindings/display/display-timing.txt) - Video port for DPI input Example diff --git a/kernel/Documentation/devicetree/bindings/video/panel-dsi-cm.txt b/kernel/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt index dce48eb9d..dce48eb9d 100644 --- a/kernel/Documentation/devicetree/bindings/video/panel-dsi-cm.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/samsung,ld9040.txt b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt index 07c36c3f7..fc595d9b9 100644 --- a/kernel/Documentation/devicetree/bindings/panel/samsung,ld9040.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt @@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in [3]. This node should describe panel's video bus. -[1]: Documentation/devicetree/bindings/video/display-timing.txt +[1]: Documentation/devicetree/bindings/display/display-timing.txt [2]: Documentation/devicetree/bindings/spi/spi-bus.txt [3]: Documentation/devicetree/bindings/media/video-interfaces.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/samsung,ltn101nt05.txt b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt index ef522c6bb..ef522c6bb 100644 --- a/kernel/Documentation/devicetree/bindings/panel/samsung,ltn101nt05.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt index e7f969d89..e7f969d89 100644 --- a/kernel/Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt b/kernel/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt index e7ee988e3..25701c81b 100644 --- a/kernel/Documentation/devicetree/bindings/panel/samsung,s6e8aa0.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt @@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child 'endpoint' node, according to the bindings defined in [2]. This node should describe panel's video bus. -[1]: Documentation/devicetree/bindings/video/display-timing.txt +[1]: Documentation/devicetree/bindings/display/display-timing.txt [2]: Documentation/devicetree/bindings/media/video-interfaces.txt Example: diff --git a/kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt b/kernel/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt index f522bb8e4..f522bb8e4 100644 --- a/kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt diff --git a/kernel/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt b/kernel/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt index 0cc8981e9..0cc8981e9 100644 --- a/kernel/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/shelly,sca07010-bfn-lnn.txt b/kernel/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt index fc1ea9e26..fc1ea9e26 100644 --- a/kernel/Documentation/devicetree/bindings/panel/shelly,sca07010-bfn-lnn.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt diff --git a/kernel/Documentation/devicetree/bindings/panel/simple-panel.txt b/kernel/Documentation/devicetree/bindings/display/panel/simple-panel.txt index 1341bbf4a..1341bbf4a 100644 --- a/kernel/Documentation/devicetree/bindings/panel/simple-panel.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/simple-panel.txt diff --git a/kernel/Documentation/devicetree/bindings/video/sony,acx565akm.txt b/kernel/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt index e12333280..e12333280 100644 --- a/kernel/Documentation/devicetree/bindings/video/sony,acx565akm.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt diff --git a/kernel/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt b/kernel/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt index 7175dc374..7175dc374 100644 --- a/kernel/Documentation/devicetree/bindings/video/toppoly,td028ttec1.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt diff --git a/kernel/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt b/kernel/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt index ec6d62975..ec6d62975 100644 --- a/kernel/Documentation/devicetree/bindings/video/tpo,td043mtea1.txt +++ b/kernel/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt diff --git a/kernel/Documentation/devicetree/bindings/video/renesas,du.txt b/kernel/Documentation/devicetree/bindings/display/renesas,du.txt index c90232392..eccd4f486 100644 --- a/kernel/Documentation/devicetree/bindings/video/renesas,du.txt +++ b/kernel/Documentation/devicetree/bindings/display/renesas,du.txt @@ -5,7 +5,9 @@ Required Properties: - compatible: must be one of the following. - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - - "renesas,du-r8a7791" for R8A7791 (R-Car M2) compatible DU + - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU + - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU + - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU - reg: A list of base address and length of each memory resource, one for each entry in the reg-names property. @@ -22,9 +24,9 @@ Required Properties: - clock-names: Name of the clocks. This property is model-dependent. - R8A7779 uses a single functional clock. The clock doesn't need to be named. - - R8A7790 and R8A7791 use one functional clock per channel and one clock - per LVDS encoder. The functional clocks must be named "du.x" with "x" - being the channel numerical index. The LVDS clocks must be named + - R8A779[0134] use one functional clock per channel and one clock per LVDS + encoder (if available). The functional clocks must be named "du.x" with + "x" being the channel numerical index. The LVDS clocks must be named "lvds.x" with "x" being the LVDS encoder numerical index. - In addition to the functional and encoder clocks, all DU versions also support externally supplied pixel clocks. Those clocks are optional. @@ -43,7 +45,9 @@ corresponding to each DU output. ----------------------------------------------------------------------------- R8A7779 (H1) DPAD 0 DPAD 1 - R8A7790 (H2) DPAD LVDS 0 LVDS 1 - R8A7791 (M2) DPAD LVDS 0 - + R8A7791 (M2-W) DPAD LVDS 0 - + R8A7793 (M2-N) DPAD LVDS 0 - + R8A7794 (E2) DPAD 0 DPAD 1 - Example: R8A7790 (R-Car H2) DU diff --git a/kernel/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt b/kernel/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index 668091f27..668091f27 100644 --- a/kernel/Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt +++ b/kernel/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt diff --git a/kernel/Documentation/devicetree/bindings/video/rockchip-drm.txt b/kernel/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt index 7fff58249..5707af893 100644 --- a/kernel/Documentation/devicetree/bindings/video/rockchip-drm.txt +++ b/kernel/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.txt @@ -9,7 +9,7 @@ Required properties: - compatible: Should be "rockchip,display-subsystem" - ports: Should contain a list of phandles pointing to display interface port of vop devices. vop definitions as defined in - Documentation/devicetree/bindings/video/rockchip-vop.txt + Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt example: diff --git a/kernel/Documentation/devicetree/bindings/video/rockchip-vop.txt b/kernel/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt index d15351f23..d15351f23 100644 --- a/kernel/Documentation/devicetree/bindings/video/rockchip-vop.txt +++ b/kernel/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt diff --git a/kernel/Documentation/devicetree/bindings/video/simple-framebuffer-sunxi.txt b/kernel/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt index c46ba641a..c46ba641a 100644 --- a/kernel/Documentation/devicetree/bindings/video/simple-framebuffer-sunxi.txt +++ b/kernel/Documentation/devicetree/bindings/display/simple-framebuffer-sunxi.txt diff --git a/kernel/Documentation/devicetree/bindings/video/simple-framebuffer.txt b/kernel/Documentation/devicetree/bindings/display/simple-framebuffer.txt index 4474ef6e0..4474ef6e0 100644 --- a/kernel/Documentation/devicetree/bindings/video/simple-framebuffer.txt +++ b/kernel/Documentation/devicetree/bindings/display/simple-framebuffer.txt diff --git a/kernel/Documentation/devicetree/bindings/fb/sm501fb.txt b/kernel/Documentation/devicetree/bindings/display/sm501fb.txt index 9d9f00980..9d9f00980 100644 --- a/kernel/Documentation/devicetree/bindings/fb/sm501fb.txt +++ b/kernel/Documentation/devicetree/bindings/display/sm501fb.txt diff --git a/kernel/Documentation/devicetree/bindings/video/ssd1289fb.txt b/kernel/Documentation/devicetree/bindings/display/ssd1289fb.txt index 4fcd5e68c..4fcd5e68c 100644 --- a/kernel/Documentation/devicetree/bindings/video/ssd1289fb.txt +++ b/kernel/Documentation/devicetree/bindings/display/ssd1289fb.txt diff --git a/kernel/Documentation/devicetree/bindings/display/ssd1307fb.txt b/kernel/Documentation/devicetree/bindings/display/ssd1307fb.txt new file mode 100644 index 000000000..eb31ed47a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/display/ssd1307fb.txt @@ -0,0 +1,50 @@ +* Solomon SSD1307 Framebuffer Driver + +Required properties: + - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for + now is i2c, and the supported chips are ssd1305, ssd1306, ssd1307 and + ssd1309. + - reg: Should contain address of the controller on the I2C bus. Most likely + 0x3c or 0x3d + - pwm: Should contain the pwm to use according to the OF device tree PWM + specification [0]. Only required for the ssd1307. + - reset-gpios: Should contain the GPIO used to reset the OLED display + - solomon,height: Height in pixel of the screen driven by the controller + - solomon,width: Width in pixel of the screen driven by the controller + - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is + mapped to. + +Optional properties: + - reset-active-low: Is the reset gpio is active on physical low? + - solomon,segment-no-remap: Display needs normal (non-inverted) data column + to segment mapping + - solomon,com-seq: Display uses sequential COM pin configuration + - solomon,com-lrremap: Display uses left-right COM pin remap + - solomon,com-invdir: Display uses inverted COM pin scan direction + - solomon,com-offset: Number of the COM pin wired to the first display line + - solomon,prechargep1: Length of deselect period (phase 1) in clock cycles. + - solomon,prechargep2: Length of precharge period (phase 2) in clock cycles. + This needs to be the higher, the higher the capacitance + of the OLED's pixels is + +[0]: Documentation/devicetree/bindings/pwm/pwm.txt + +Examples: +ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + reset-active-low; +}; + +ssd1306: oled@3c { + compatible = "solomon,ssd1306fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7>; + reset-active-low; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; +}; diff --git a/kernel/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/kernel/Documentation/devicetree/bindings/display/st,stih4xx.txt index 6b1d75f1a..a352ed30c 100644 --- a/kernel/Documentation/devicetree/bindings/gpu/st,stih4xx.txt +++ b/kernel/Documentation/devicetree/bindings/display/st,stih4xx.txt @@ -52,17 +52,16 @@ STMicroelectronics stih4xx platforms See ../reset/reset.txt for details. - reset-names: names of the resets listed in resets property in the same order. - - ranges: to allow probing of subdevices - sti-hdmi: hdmi output block - must be a child of sti-tvout + must be a child of sti-display-subsystem Required properties: - compatible: "st,stih<chip>-hdmi"; - reg: Physical base address of the IP registers and length of memory mapped region. - reg-names: names of the mapped memory regions listed in regs property in the same order. - interrupts : HDMI interrupt number to the CPU. - - interrupt-names: name of the interrupts listed in interrupts property in + - interrupt-names: names of the interrupts listed in interrupts property in the same order - clocks: from common clock binding: handle hardware IP needed clocks, the number of clocks may depend of the SoC type. @@ -72,7 +71,7 @@ STMicroelectronics stih4xx platforms sti-hda: Required properties: - must be a child of sti-tvout + must be a child of sti-display-subsystem - compatible: "st,stih<chip>-hda" - reg: Physical base address of the IP registers and length of memory mapped region. - reg-names: names of the mapped memory regions listed in regs property in @@ -85,7 +84,7 @@ sti-hda: sti-dvo: Required properties: - must be a child of sti-tvout + must be a child of sti-display-subsystem - compatible: "st,stih<chip>-dvo" - reg: Physical base address of the IP registers and length of memory mapped region. - reg-names: names of the mapped memory regions listed in regs property in @@ -96,7 +95,7 @@ sti-dvo: - clock-names: names of the clocks listed in clocks property in the same order. - pinctrl-0: pin control handle - - pinctrl-name: names of the pin control to use + - pinctrl-names: names of the pin control states to use - sti,panel: phandle of the panel connected to the DVO output sti-hqvdp: @@ -195,38 +194,37 @@ Example: reg-names = "tvout-reg", "hda-reg", "syscfg"; reset-names = "tvout"; resets = <&softreset STIH416_HDTVOUT_SOFTRESET>; - ranges; - - sti-hdmi@fe85c000 { - compatible = "st,stih416-hdmi"; - reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>; - reg-names = "hdmi-reg", "syscfg"; - interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>; - interrupt-names = "irq"; - clock-names = "pix", "tmds", "phy", "audio"; - clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>; - }; - - sti-hda@fe85a000 { - compatible = "st,stih416-hda"; - reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>; - reg-names = "hda-reg", "video-dacs-ctrl"; - clock-names = "pix", "hddac"; - clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>; - }; - - sti-dvo@8d00400 { - compatible = "st,stih407-dvo"; - reg = <0x8d00400 0x200>; - reg-names = "dvo-reg"; - clock-names = "dvo_pix", "dvo", - "main_parent", "aux_parent"; - clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>, - <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dvo>; - sti,panel = <&panel_dvo>; - }; + }; + + sti-hdmi@fe85c000 { + compatible = "st,stih416-hdmi"; + reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>; + reg-names = "hdmi-reg", "syscfg"; + interrupts = <GIC_SPI 173 IRQ_TYPE_NONE>; + interrupt-names = "irq"; + clock-names = "pix", "tmds", "phy", "audio"; + clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>; + }; + + sti-hda@fe85a000 { + compatible = "st,stih416-hda"; + reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", "hddac"; + clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>; + }; + + sti-dvo@8d00400 { + compatible = "st,stih407-dvo"; + reg = <0x8d00400 0x200>; + reg-names = "dvo-reg"; + clock-names = "dvo_pix", "dvo", + "main_parent", "aux_parent"; + clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>, + <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dvo>; + sti,panel = <&panel_dvo>; }; sti-hqvdp@9c000000 { @@ -237,7 +235,7 @@ Example: reset-names = "hqvdp"; resets = <&softreset STIH407_HDQVDP_SOFTRESET>; st,vtg = <&vtg_main>; - }; + }; }; ... }; diff --git a/kernel/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt b/kernel/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt index e4a25cedc..e4a25cedc 100644 --- a/kernel/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt +++ b/kernel/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt diff --git a/kernel/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/kernel/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 009f4bfa1..a3bd8c050 100644 --- a/kernel/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt +++ b/kernel/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -184,7 +184,7 @@ of the following host1x client modules: - avdd-dsi-supply: phandle of a supply that powers the DSI controller - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying which pads are used by this DSI output and need to be calibrated. See also - ../mipi/nvidia,tegra114-mipi.txt. + ../display/tegra/nvidia,tegra114-mipi.txt. Optional properties: - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing @@ -197,9 +197,11 @@ of the following host1x client modules: - sor: serial output resource Required properties: - - compatible: For Tegra124, must contain "nvidia,tegra124-sor". Otherwise, - must contain '"nvidia,<chip>-sor", "nvidia,tegra124-sor"', where <chip> - is tegra132. + - compatible: Should be: + - "nvidia,tegra124-sor": for Tegra124 and Tegra132 + - "nvidia,tegra132-sor": for Tegra132 + - "nvidia,tegra210-sor": for Tegra210 + - "nvidia,tegra210-sor1": for Tegra210 - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. - clocks: Must contain an entry for each entry in clock-names. diff --git a/kernel/Documentation/devicetree/bindings/video/ti,dra7-dss.txt b/kernel/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt index f33a05137..c30f9ec18 100644 --- a/kernel/Documentation/devicetree/bindings/video/ti,dra7-dss.txt +++ b/kernel/Documentation/devicetree/bindings/display/ti/ti,dra7-dss.txt @@ -1,7 +1,7 @@ Texas Instruments DRA7x Display Subsystem ========================================= -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic description about OMAP Display Subsystem bindings. DSS Core diff --git a/kernel/Documentation/devicetree/bindings/video/ti,omap-dss.txt b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt index e1ef29569..e1ef29569 100644 --- a/kernel/Documentation/devicetree/bindings/video/ti,omap-dss.txt +++ b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt diff --git a/kernel/Documentation/devicetree/bindings/video/ti,omap2-dss.txt b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt index fa8bb2ed1..afcd5a86c 100644 --- a/kernel/Documentation/devicetree/bindings/video/ti,omap2-dss.txt +++ b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap2-dss.txt @@ -1,7 +1,7 @@ Texas Instruments OMAP2 Display Subsystem ========================================= -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic description about OMAP Display Subsystem bindings. DSS Core diff --git a/kernel/Documentation/devicetree/bindings/video/ti,omap3-dss.txt b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt index 0023fa4b1..dc66e1447 100644 --- a/kernel/Documentation/devicetree/bindings/video/ti,omap3-dss.txt +++ b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap3-dss.txt @@ -1,7 +1,7 @@ Texas Instruments OMAP3 Display Subsystem ========================================= -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic description about OMAP Display Subsystem bindings. DSS Core diff --git a/kernel/Documentation/devicetree/bindings/video/ti,omap4-dss.txt b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt index b8c29fbd1..bc624db88 100644 --- a/kernel/Documentation/devicetree/bindings/video/ti,omap4-dss.txt +++ b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap4-dss.txt @@ -1,7 +1,7 @@ Texas Instruments OMAP4 Display Subsystem ========================================= -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic description about OMAP Display Subsystem bindings. DSS Core diff --git a/kernel/Documentation/devicetree/bindings/video/ti,omap5-dss.txt b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt index 38ffc8fcd..118a486c4 100644 --- a/kernel/Documentation/devicetree/bindings/video/ti,omap5-dss.txt +++ b/kernel/Documentation/devicetree/bindings/display/ti/ti,omap5-dss.txt @@ -1,7 +1,7 @@ Texas Instruments OMAP5 Display Subsystem ========================================= -See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic +See Documentation/devicetree/bindings/display/ti/ti,omap-dss.txt for generic description about OMAP Display Subsystem bindings. DSS Core diff --git a/kernel/Documentation/devicetree/bindings/video/ti,opa362.txt b/kernel/Documentation/devicetree/bindings/display/ti/ti,opa362.txt index f96083c0b..f96083c0b 100644 --- a/kernel/Documentation/devicetree/bindings/video/ti,opa362.txt +++ b/kernel/Documentation/devicetree/bindings/display/ti/ti,opa362.txt diff --git a/kernel/Documentation/devicetree/bindings/video/ti,tfp410.txt b/kernel/Documentation/devicetree/bindings/display/ti/ti,tfp410.txt index 2cbe32a3d..2cbe32a3d 100644 --- a/kernel/Documentation/devicetree/bindings/video/ti,tfp410.txt +++ b/kernel/Documentation/devicetree/bindings/display/ti/ti,tfp410.txt diff --git a/kernel/Documentation/devicetree/bindings/video/ti,tpd12s015.txt b/kernel/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt index 26e6d32e3..26e6d32e3 100644 --- a/kernel/Documentation/devicetree/bindings/video/ti,tpd12s015.txt +++ b/kernel/Documentation/devicetree/bindings/display/ti/ti,tpd12s015.txt diff --git a/kernel/Documentation/devicetree/bindings/drm/tilcdc/panel.txt b/kernel/Documentation/devicetree/bindings/display/tilcdc/panel.txt index 4ab9e2300..f20b31cdc 100644 --- a/kernel/Documentation/devicetree/bindings/drm/tilcdc/panel.txt +++ b/kernel/Documentation/devicetree/bindings/display/tilcdc/panel.txt @@ -15,7 +15,7 @@ Required properties: - display-timings: typical videomode of lcd panel. Multiple video modes can be listed if the panel supports multiple timings, but the 'native-mode' should be the preferred/default resolution. Refer to - Documentation/devicetree/bindings/video/display-timing.txt for display + Documentation/devicetree/bindings/display/display-timing.txt for display timing binding details. Optional properties: diff --git a/kernel/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt b/kernel/Documentation/devicetree/bindings/display/tilcdc/tfp410.txt index a58ae7756..a58ae7756 100644 --- a/kernel/Documentation/devicetree/bindings/drm/tilcdc/tfp410.txt +++ b/kernel/Documentation/devicetree/bindings/display/tilcdc/tfp410.txt diff --git a/kernel/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt b/kernel/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt index fff10da5e..2136ee81e 100644 --- a/kernel/Documentation/devicetree/bindings/drm/tilcdc/tilcdc.txt +++ b/kernel/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt @@ -18,6 +18,12 @@ Optional properties: - max-pixelclock: The maximum pixel clock that can be supported by the lcd controller in KHz. +Optional nodes: + + - port/ports: to describe a connection to an external encoder. The + binding follows Documentation/devicetree/bindings/graph.txt and + suppors a single port with a single endpoint. + Example: fb: fb@4830e000 { @@ -26,4 +32,25 @@ Example: interrupt-parent = <&intc>; interrupts = <36>; ti,hwmods = "lcdc"; + + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; + }; + + tda19988: tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; + + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_bonelt_pins>; + pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; }; diff --git a/kernel/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/kernel/Documentation/devicetree/bindings/display/via,vt8500-fb.txt index 2871e218a..2871e218a 100644 --- a/kernel/Documentation/devicetree/bindings/video/via,vt8500-fb.txt +++ b/kernel/Documentation/devicetree/bindings/display/via,vt8500-fb.txt diff --git a/kernel/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt b/kernel/Documentation/devicetree/bindings/display/wm,prizm-ge-rops.txt index a850fa011..a850fa011 100644 --- a/kernel/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt +++ b/kernel/Documentation/devicetree/bindings/display/wm,prizm-ge-rops.txt diff --git a/kernel/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/kernel/Documentation/devicetree/bindings/display/wm,wm8505-fb.txt index 0bcadb284..0bcadb284 100644 --- a/kernel/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt +++ b/kernel/Documentation/devicetree/bindings/display/wm,wm8505-fb.txt diff --git a/kernel/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/kernel/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt new file mode 100644 index 000000000..47cb1d14b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt @@ -0,0 +1,61 @@ +Analog Device AXI-DMAC DMA controller + +Required properties: + - compatible: Must be "adi,axi-dmac-1.00.a". + - reg: Specification for the controllers memory mapped register map. + - interrupts: Specification for the controllers interrupt. + - clocks: Phandle and specifier to the controllers AXI interface clock + - #dma-cells: Must be 1. + +Required sub-nodes: + - adi,channels: This sub-node must contain a sub-node for each DMA channel. For + the channel sub-nodes the following bindings apply. They must match the + configuration options of the peripheral as it was instantiated. + +Required properties for adi,channels sub-node: + - #size-cells: Must be 0 + - #address-cells: Must be 1 + +Required channel sub-node properties: + - reg: Which channel this node refers to. + - adi,length-width: Width of the DMA transfer length register. + - adi,source-bus-width, + adi,destination-bus-width: Width of the source or destination bus in bits. + - adi,source-bus-type, + adi,destination-bus-type: Type of the source or destination bus. Must be one + of the following: + 0 (AXI_DMAC_TYPE_AXI_MM): Memory mapped AXI interface + 1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface + 2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface + +Optional channel properties: + - adi,cyclic: Must be set if the channel supports hardware cyclic DMA + transfers. + - adi,2d: Must be set if the channel supports hardware 2D DMA transfers. + +DMA clients connected to the AXI-DMAC DMA controller must use the format +described in the dma.txt file using a one-cell specifier. The value of the +specifier refers to the DMA channel index. + +Example: + +dma: dma@7c420000 { + compatible = "adi,axi-dmac-1.00.a"; + reg = <0x7c420000 0x10000>; + interrupts = <0 57 0>; + clocks = <&clkc 16>; + #dma-cells = <1>; + + adi,channels { + #size-cells = <0>; + #address-cells = <1>; + + dma-channel@0 { + reg = <0>; + adi,source-bus-width = <32>; + adi,source-bus-type = <ADI_AXI_DMAC_TYPE_MM_AXI>; + adi,destination-bus-width = <64>; + adi,destination-bus-type = <ADI_AXI_DMAC_TYPE_FIFO>; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/kernel/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt index d3058768b..c53e0b080 100644 --- a/kernel/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt +++ b/kernel/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt @@ -35,7 +35,7 @@ Example: device_type = "dma"; reg = <0x0 0x1f270000 0x0 0x10000>, <0x0 0x1f200000 0x0 0x10000>, - <0x0 0x1b008000 0x0 0x2000>, + <0x0 0x1b000000 0x0 0x400000>, <0x0 0x1054a000 0x0 0x100>; interrupts = <0x0 0x82 0x4>, <0x0 0xb8 0x4>, diff --git a/kernel/Documentation/devicetree/bindings/dma/arm-pl08x.txt b/kernel/Documentation/devicetree/bindings/dma/arm-pl08x.txt new file mode 100644 index 000000000..8a0097a02 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/dma/arm-pl08x.txt @@ -0,0 +1,54 @@ +* ARM PrimeCells PL080 and PL081 and derivatives DMA controller + +Required properties: +- compatible: "arm,pl080", "arm,primecell"; + "arm,pl081", "arm,primecell"; +- reg: Address range of the PL08x registers +- interrupt: The PL08x interrupt number +- clocks: The clock running the IP core clock +- clock-names: Must contain "apb_pclk" +- lli-bus-interface-ahb1: if AHB master 1 is eligible for fetching LLIs +- lli-bus-interface-ahb2: if AHB master 2 is eligible for fetching LLIs +- mem-bus-interface-ahb1: if AHB master 1 is eligible for fetching memory contents +- mem-bus-interface-ahb2: if AHB master 2 is eligible for fetching memory contents +- #dma-cells: must be <2>. First cell should contain the DMA request, + second cell should contain either 1 or 2 depending on + which AHB master that is used. + +Optional properties: +- dma-channels: contains the total number of DMA channels supported by the DMAC +- dma-requests: contains the total number of DMA requests supported by the DMAC +- memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32 + 64, 128 or 256 bytes are legal values +- memcpy-bus-width: the bus width used for memcpy: 8, 16 or 32 are legal + values + +Clients +Required properties: +- dmas: List of DMA controller phandle, request channel and AHB master id +- dma-names: Names of the aforementioned requested channels + +Example: + +dmac0: dma-controller@10130000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x10130000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <15>; + clocks = <&hclkdma0>; + clock-names = "apb_pclk"; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + #dma-cells = <2>; +}; + +device@40008000 { + ... + dmas = <&dmac0 0 2 + &dmac0 1 2>; + dma-names = "tx", "rx"; + ... +}; diff --git a/kernel/Documentation/devicetree/bindings/dma/dma.txt b/kernel/Documentation/devicetree/bindings/dma/dma.txt index 82104271e..6312fb00c 100644 --- a/kernel/Documentation/devicetree/bindings/dma/dma.txt +++ b/kernel/Documentation/devicetree/bindings/dma/dma.txt @@ -31,6 +31,34 @@ Example: dma-requests = <127>; }; +* DMA router + +DMA routers are transparent IP blocks used to route DMA request lines from +devices to the DMA controller. Some SoCs (like TI DRA7x) have more peripherals +integrated with DMA requests than what the DMA controller can handle directly. + +Required property: +- dma-masters: phandle of the DMA controller or list of phandles for + the DMA controllers the router can direct the signal to. +- #dma-cells: Must be at least 1. Used to provide DMA router specific + information. See DMA client binding below for more + details. + +Optional properties: +- dma-requests: Number of incoming request lines the router can handle. +- In the node pointed by the dma-masters: + - dma-requests: The router driver might need to look for this in order + to configure the routing. + +Example: + sdma_xbar: dma-router@4a002b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0x4a002b78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; + }; * DMA client diff --git a/kernel/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt b/kernel/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt new file mode 100644 index 000000000..87740adb2 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt @@ -0,0 +1,54 @@ +NXP LPC18xx/43xx DMA MUX (DMA request router) + +Required properties: +- compatible: "nxp,lpc1850-dmamux" +- reg: Memory map for accessing module +- #dma-cells: Should be set to <3>. + * 1st cell contain the master dma request signal + * 2nd cell contain the mux value (0-3) for the peripheral + * 3rd cell contain either 1 or 2 depending on the AHB + master used. +- dma-requests: Number of DMA requests for the mux +- dma-masters: phandle pointing to the DMA controller + +The DMA controller node need to have the following poroperties: +- dma-requests: Number of DMA requests the controller can handle + +Example: + +dmac: dma@40002000 { + compatible = "nxp,lpc1850-gpdma", "arm,pl080", "arm,primecell"; + arm,primecell-periphid = <0x00041080>; + reg = <0x40002000 0x1000>; + interrupts = <2>; + clocks = <&ccu1 CLK_CPU_DMA>; + clock-names = "apb_pclk"; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <16>; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb1; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; +}; + +dmamux: dma-mux { + compatible = "nxp,lpc1850-dmamux"; + #dma-cells = <3>; + dma-requests = <64>; + dma-masters = <&dmac>; +}; + +uart0: serial@40081000 { + compatible = "nxp,lpc1850-uart", "ns16550a"; + reg = <0x40081000 0x1000>; + reg-shift = <2>; + interrupts = <24>; + clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; + clock-names = "uartclk", "reg"; + dmas = <&dmamux 1 1 2 + &dmamux 2 1 2>; + dma-names = "tx", "rx"; +}; diff --git a/kernel/Documentation/devicetree/bindings/dma/mv-xor.txt b/kernel/Documentation/devicetree/bindings/dma/mv-xor.txt index 7c6cb7fce..276ef815e 100644 --- a/kernel/Documentation/devicetree/bindings/dma/mv-xor.txt +++ b/kernel/Documentation/devicetree/bindings/dma/mv-xor.txt @@ -1,7 +1,7 @@ * Marvell XOR engines Required properties: -- compatible: Should be "marvell,orion-xor" +- compatible: Should be "marvell,orion-xor" or "marvell,armada-380-xor" - reg: Should contain registers location and length (two sets) the first set is the low registers, the second set the high registers for the XOR engine. @@ -12,10 +12,13 @@ XOR engine has. Those sub-nodes have the following required properties: - interrupts: interrupt of the XOR channel -And the following optional properties: +The sub-nodes used to contain one or several of the following +properties, but they are now deprecated: - dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations - dmacap,memset to indicate that the XOR channel is capable of memset operations - dmacap,xor to indicate that the XOR channel is capable of xor operations +- dmacap,interrupt to indicate that the XOR channel is capable of + generating interrupts Example: @@ -28,13 +31,8 @@ xor@d0060900 { xor00 { interrupts = <51>; - dmacap,memcpy; - dmacap,xor; }; xor01 { interrupts = <52>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; }; }; diff --git a/kernel/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt b/kernel/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt index ecbc96ad3..ccd52d6a2 100644 --- a/kernel/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt +++ b/kernel/Documentation/devicetree/bindings/dma/sirfsoc-dma.txt @@ -3,7 +3,8 @@ See dma.txt first Required properties: -- compatible: Should be "sirf,prima2-dmac" or "sirf,marco-dmac" +- compatible: Should be "sirf,prima2-dmac", "sirf,atlas7-dmac" or + "sirf,atlas7-dmac-v2" - reg: Should contain DMA registers location and length. - interrupts: Should contain one interrupt shared by all channel - #dma-cells: must be <1>. used to represent the number of integer diff --git a/kernel/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/kernel/Documentation/devicetree/bindings/dma/sun4i-dma.txt new file mode 100644 index 000000000..f1634a27a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/dma/sun4i-dma.txt @@ -0,0 +1,46 @@ +Allwinner A10 DMA Controller + +This driver follows the generic DMA bindings defined in dma.txt. + +Required properties: + +- compatible: Must be "allwinner,sun4i-a10-dma" +- reg: Should contain the registers base address and length +- interrupts: Should contain a reference to the interrupt used by this device +- clocks: Should contain a reference to the parent AHB clock +- #dma-cells : Should be 2, first cell denoting normal or dedicated dma, + second cell holding the request line number. + +Example: + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + +Clients: + +DMA clients connected to the Allwinner A10 DMA controller must use the +format described in the dma.txt file, using a three-cell specifier for +each channel: a phandle plus two integer cells. +The three cells in order are: + +1. A phandle pointing to the DMA controller. +2. Whether it is using normal (0) or dedicated (1) channels +3. The port ID as specified in the datasheet + +Example: + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <0 12 4>; + clocks = <&ahb_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/kernel/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/kernel/Documentation/devicetree/bindings/dma/sun6i-dma.txt index 9cdcba24d..d13c136ce 100644 --- a/kernel/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/kernel/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -4,7 +4,10 @@ This driver follows the generic DMA bindings defined in dma.txt. Required properties: -- compatible: Must be "allwinner,sun6i-a31-dma" or "allwinner,sun8i-a23-dma" +- compatible: Must be one of + "allwinner,sun6i-a31-dma" + "allwinner,sun8i-a23-dma" + "allwinner,sun8i-h3-dma" - reg: Should contain the registers base address and length - interrupts: Should contain a reference to the interrupt used by this device - clocks: Should contain a reference to the parent AHB clock diff --git a/kernel/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/kernel/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt new file mode 100644 index 000000000..b152a75dc --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt @@ -0,0 +1,63 @@ +Texas Instruments DMA Crossbar (DMA request router) + +Required properties: +- compatible: "ti,dra7-dma-crossbar" for DRA7xx DMA crossbar + "ti,am335x-edma-crossbar" for AM335x and AM437x +- reg: Memory map for accessing module +- #dma-cells: Should be set to to match with the DMA controller's dma-cells + for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar. +- dma-requests: Number of DMA requests the crossbar can receive +- dma-masters: phandle pointing to the DMA controller + +The DMA controller node need to have the following poroperties: +- dma-requests: Number of DMA requests the controller can handle + +Optional properties: +- ti,dma-safe-map: Safe routing value for unused request lines + +Notes: +When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request +the DMA event number as crossbar ID (input to the DMA crossbar). + +For ti,am335x-edma-crossbar: the meaning of parameters of dmas for clients: +dmas = <&edma_xbar 12 0 1>; where <12> is the DMA request number, <0> is the TC +the event should be assigned and <1> is the mux selection for in the crossbar. +When mux 0 is used the DMA channel can be requested directly from edma node. + +Example: + +/* DMA controller */ +sdma: dma-controller@4a056000 { + compatible = "ti,omap4430-sdma"; + reg = <0x4a056000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <127>; +}; + +/* DMA crossbar */ +sdma_xbar: dma-router@4a002b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0x4a002b78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; +}; + +/* DMA client */ +uart1: serial@4806a000 { + compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + status = "disabled"; + /* Requesting crossbar input 49 and 50 */ + dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; + dma-names = "tx", "rx"; +}; diff --git a/kernel/Documentation/devicetree/bindings/dma/ti-edma.txt b/kernel/Documentation/devicetree/bindings/dma/ti-edma.txt index 5ba525a10..079b42a81 100644 --- a/kernel/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/kernel/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -1,4 +1,117 @@ -TI EDMA +Texas Instruments eDMA + +The eDMA3 consists of two components: Channel controller (CC) and Transfer +Controller(s) (TC). The CC is the main entry for DMA users since it is +responsible for the DMA channel handling, while the TCs are responsible to +execute the actual DMA tansfer. + +------------------------------------------------------------------------------ +eDMA3 Channel Controller + +Required properties: +- compatible: "ti,edma3-tpcc" for the channel controller(s) +- #dma-cells: Should be set to <2>. The first number is the DMA request + number and the second is the TC the channel is serviced on. +- reg: Memory map of eDMA CC +- reg-names: "edma3_cc" +- interrupts: Interrupt lines for CCINT, MPERR and CCERRINT. +- interrupt-names: "edma3_ccint", "emda3_mperr" and "edma3_ccerrint" +- ti,tptcs: List of TPTCs associated with the eDMA in the following form: + <&tptc_phandle TC_priority_number>. The highest priority is 0. + +Optional properties: +- ti,hwmods: Name of the hwmods associated to the eDMA CC +- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow + these channels will be SW triggered channels. See example. +- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by + the driver, they are allocated to be used by for example the + DSP. See example. + +------------------------------------------------------------------------------ +eDMA3 Transfer Controller + +Required properties: +- compatible: "ti,edma3-tptc" for the transfer controller(s) +- reg: Memory map of eDMA TC +- interrupts: Interrupt number for TCerrint. + +Optional properties: +- ti,hwmods: Name of the hwmods associated to the given eDMA TC +- interrupt-names: "edma3_tcerrint" + +------------------------------------------------------------------------------ +Example: + +edma: edma@49000000 { + compatible = "ti,edma3-tpcc"; + ti,hwmods = "tpcc"; + reg = <0x49000000 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "emda3_mperr", "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>; + + /* Channel 20 and 21 is allocated for memcpy */ + ti,edma-memcpy-channels = <20 21>; + /* The following PaRAM slots are reserved: 35-44 and 100-109 */ + ti,edma-reserved-slot-ranges = <35 10>, <100 10>; +}; + +edma_tptc0: tptc@49800000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc0"; + reg = <0x49800000 0x100000>; + interrupts = <112>; + interrupt-names = "edm3_tcerrint"; +}; + +edma_tptc1: tptc@49900000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc1"; + reg = <0x49900000 0x100000>; + interrupts = <113>; + interrupt-names = "edm3_tcerrint"; +}; + +edma_tptc2: tptc@49a00000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc2"; + reg = <0x49a00000 0x100000>; + interrupts = <114>; + interrupt-names = "edm3_tcerrint"; +}; + +sham: sham@53100000 { + compatible = "ti,omap4-sham"; + ti,hwmods = "sham"; + reg = <0x53100000 0x200>; + interrupts = <109>; + /* DMA channel 36 executed on eDMA TC0 - low priority queue */ + dmas = <&edma 36 0>; + dma-names = "rx"; +}; + +mcasp0: mcasp@48038000 { + compatible = "ti,am33xx-mcasp-audio"; + ti,hwmods = "mcasp0"; + reg = <0x48038000 0x2000>, + <0x46000000 0x400000>; + reg-names = "mpu", "dat"; + interrupts = <80>, <81>; + interrupt-names = "tx", "rx"; + status = "disabled"; + /* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */ + dmas = <&edma 8 2>, + <&edma 9 2>; + dma-names = "tx", "rx"; +}; + +------------------------------------------------------------------------------ +DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc +binding. Required properties: - compatible : "ti,edma3" diff --git a/kernel/Documentation/devicetree/bindings/dma/zxdma.txt b/kernel/Documentation/devicetree/bindings/dma/zxdma.txt new file mode 100644 index 000000000..3207ceb04 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/dma/zxdma.txt @@ -0,0 +1,38 @@ +* ZTE ZX296702 DMA controller + +Required properties: +- compatible: Should be "zte,zx296702-dma" +- reg: Should contain DMA registers location and length. +- interrupts: Should contain one interrupt shared by all channel +- #dma-cells: see dma.txt, should be 1, para number +- dma-channels: physical channels supported +- dma-requests: virtual channels supported, each virtual channel + have specific request line +- clocks: clock required + +Example: + +Controller: + dma: dma-controller@0x09c00000{ + compatible = "zte,zx296702-dma"; + reg = <0x09c00000 0x1000>; + clocks = <&topclk ZX296702_DMA_ACLK>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <24>; + dma-requests = <24>; + }; + +Client: +Use specific request line passing from dmax +For example, spdif0 tx channel request line is 4 + spdif0: spdif0@0b004000 { + #sound-dai-cells = <0>; + compatible = "zte,zx296702-spdif"; + reg = <0x0b004000 0x1000>; + clocks = <&lsp0clk ZX296702_SPDIF0_DIV>; + clock-names = "tx"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 4>; + dma-names = "tx"; + } diff --git a/kernel/Documentation/devicetree/bindings/drm/tilcdc/slave.txt b/kernel/Documentation/devicetree/bindings/drm/tilcdc/slave.txt deleted file mode 100644 index 3d2c52460..000000000 --- a/kernel/Documentation/devicetree/bindings/drm/tilcdc/slave.txt +++ /dev/null @@ -1,18 +0,0 @@ -Device-Tree bindings for tilcdc DRM encoder slave output driver - -Required properties: - - compatible: value should be "ti,tilcdc,slave". - - i2c: the phandle for the i2c device the encoder slave is connected to - -Recommended properties: - - pinctrl-names, pinctrl-0: the pincontrol settings to configure - muxing properly for pins that connect to TFP410 device - -Example: - - hdmi { - compatible = "ti,tilcdc,slave"; - i2c = <&i2c0>; - pinctrl-names = "default"; - pinctrl-0 = <&nxp_hdmi_bonelt_pins>; - }; diff --git a/kernel/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt b/kernel/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt new file mode 100644 index 000000000..78e2a31c5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt @@ -0,0 +1,102 @@ +* APM X-Gene SoC EDAC node + +EDAC node is defined to describe on-chip error detection and correction. +The follow error types are supported: + + memory controller - Memory controller + PMD (L1/L2) - Processor module unit (PMD) L1/L2 cache + L3 - L3 cache controller + SoC - SoC IP's such as Ethernet, SATA, and etc + +The following section describes the EDAC DT node binding. + +Required properties: +- compatible : Shall be "apm,xgene-edac". +- regmap-csw : Regmap of the CPU switch fabric (CSW) resource. +- regmap-mcba : Regmap of the MCB-A (memory bridge) resource. +- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource. +- regmap-efuse : Regmap of the PMD efuse resource. +- reg : First resource shall be the CPU bus (PCP) resource. +- interrupts : Interrupt-specifier for MCU, PMD, L3, or SoC error + IRQ(s). + +Required properties for memory controller subnode: +- compatible : Shall be "apm,xgene-edac-mc". +- reg : First resource shall be the memory controller unit + (MCU) resource. +- memory-controller : Instance number of the memory controller. + +Required properties for PMD subnode: +- compatible : Shall be "apm,xgene-edac-pmd" or + "apm,xgene-edac-pmd-v2". +- reg : First resource shall be the PMD resource. +- pmd-controller : Instance number of the PMD controller. + +Required properties for L3 subnode: +- compatible : Shall be "apm,xgene-edac-l3" or + "apm,xgene-edac-l3-v2". +- reg : First resource shall be the L3 EDAC resource. + +Required properties for SoC subnode: +- compatible : Shall be "apm,xgene-edac-soc-v1" for revision 1 or + "apm,xgene-edac-l3-soc" for general value reporting + only. +- reg : First resource shall be the SoC EDAC resource. + +Example: + csw: csw@7e200000 { + compatible = "apm,xgene-csw", "syscon"; + reg = <0x0 0x7e200000 0x0 0x1000>; + }; + + mcba: mcba@7e700000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e700000 0x0 0x1000>; + }; + + mcbb: mcbb@7e720000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e720000 0x0 0x1000>; + }; + + efuse: efuse@1054a000 { + compatible = "apm,xgene-efuse", "syscon"; + reg = <0x0 0x1054a000 0x0 0x20>; + }; + + edac@78800000 { + compatible = "apm,xgene-edac"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + regmap-csw = <&csw>; + regmap-mcba = <&mcba>; + regmap-mcbb = <&mcbb>; + regmap-efuse = <&efuse>; + reg = <0x0 0x78800000 0x0 0x100>; + interrupts = <0x0 0x20 0x4>, + <0x0 0x21 0x4>, + <0x0 0x27 0x4>; + + edacmc@7e800000 { + compatible = "apm,xgene-edac-mc"; + reg = <0x0 0x7e800000 0x0 0x1000>; + memory-controller = <0>; + }; + + edacpmd@7c000000 { + compatible = "apm,xgene-edac-pmd"; + reg = <0x0 0x7c000000 0x0 0x200000>; + pmd-controller = <0>; + }; + + edacl3@7e600000 { + compatible = "apm,xgene-edac-l3"; + reg = <0x0 0x7e600000 0x0 0x1000>; + }; + + edacsoc@7e930000 { + compatible = "apm,xgene-edac-soc-v1"; + reg = <0x0 0x7e930000 0x0 0x1000>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/misc/at25.txt b/kernel/Documentation/devicetree/bindings/eeprom/at25.txt index 1d3447165..1d3447165 100644 --- a/kernel/Documentation/devicetree/bindings/misc/at25.txt +++ b/kernel/Documentation/devicetree/bindings/eeprom/at25.txt diff --git a/kernel/Documentation/devicetree/bindings/eeprom.txt b/kernel/Documentation/devicetree/bindings/eeprom/eeprom.txt index 4342c10de..4342c10de 100644 --- a/kernel/Documentation/devicetree/bindings/eeprom.txt +++ b/kernel/Documentation/devicetree/bindings/eeprom/eeprom.txt diff --git a/kernel/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/kernel/Documentation/devicetree/bindings/extcon/extcon-arizona.txt new file mode 100644 index 000000000..e1705fae6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/extcon/extcon-arizona.txt @@ -0,0 +1,15 @@ +Cirrus Logic Arizona class audio SoCs + +These devices are audio SoCs with extensive digital capabilities and a range +of analogue I/O. + +This document lists Extcon specific bindings, see the primary binding document: + ../mfd/arizona.txt + +Optional properties: + + - wlf,hpdet-channel : Headphone detection channel. + ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL + ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR + If this node is not mentioned or if the value is unknown, then + headphone detection mode is set to HPDETL. diff --git a/kernel/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/kernel/Documentation/devicetree/bindings/extcon/extcon-palmas.txt index 45414bbcd..f61d5af44 100644 --- a/kernel/Documentation/devicetree/bindings/extcon/extcon-palmas.txt +++ b/kernel/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -10,8 +10,11 @@ Required Properties: Optional Properties: - ti,wakeup : To enable the wakeup comparator in probe - - ti,enable-id-detection: Perform ID detection. + - ti,enable-id-detection: Perform ID detection. If id-gpio is specified + it performs id-detection using GPIO else using OTG core. - ti,enable-vbus-detection: Perform VBUS detection. + - id-gpio: gpio for GPIO ID detection. See gpio binding. + - debounce-delay-ms: debounce delay for GPIO ID pin in milliseconds. palmas-usb { compatible = "ti,twl6035-usb", "ti,palmas-usb"; diff --git a/kernel/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt b/kernel/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt index 9b027a615..d52f33404 100644 --- a/kernel/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt +++ b/kernel/Documentation/devicetree/bindings/fpga/altera-socfpga-fpga-mgr.txt @@ -9,7 +9,7 @@ Required properties: Example: - hps_0_fpgamgr: fpgamgr@0xff706000 { + hps_0_fpgamgr: fpgamgr@ff706000 { compatible = "altr,socfpga-fpga-mgr"; reg = <0xFF706000 0x1000 0xFFB90000 0x1000>; diff --git a/kernel/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt b/kernel/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt new file mode 100644 index 000000000..7018aa896 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.txt @@ -0,0 +1,19 @@ +Xilinx Zynq FPGA Manager + +Required properties: +- compatible: should contain "xlnx,zynq-devcfg-1.0" +- reg: base address and size for memory mapped io +- interrupts: interrupt for the FPGA manager device +- clocks: phandle for clocks required operation +- clock-names: name for the clock, should be "ref_clk" +- syscon: phandle for access to SLCR registers + +Example: + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + interrupts = <0 8 4>; + clocks = <&clkc 12>; + clock-names = "ref_clk"; + syscon = <&slcr>; + }; diff --git a/kernel/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/kernel/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt index 23e1d3194..41372d441 100644 --- a/kernel/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt +++ b/kernel/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt @@ -29,7 +29,7 @@ Example: fuse@7000f800 { compatible = "nvidia,tegra20-efuse"; - reg = <0x7000F800 0x400>, + reg = <0x7000f800 0x400>, <0x70000000 0x400>; clocks = <&tegra_car TEGRA20_CLK_FUSE>; clock-names = "fuse"; diff --git a/kernel/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/kernel/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt new file mode 100644 index 000000000..b405b4410 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt @@ -0,0 +1,86 @@ +Broadcom STB "UPG GIO" GPIO controller + +The controller's registers are organized as sets of eight 32-bit +registers with each set controlling a bank of up to 32 pins. A single +interrupt is shared for all of the banks handled by the controller. + +Required properties: + +- compatible: + Must be "brcm,brcmstb-gpio" + +- reg: + Define the base and range of the I/O address space containing + the brcmstb GPIO controller registers + +- #gpio-cells: + Should be <2>. The first cell is the pin number (within the controller's + pin space), and the second is used for the following: + bit[0]: polarity (0 for active-high, 1 for active-low) + +- gpio-controller: + Specifies that the node is a GPIO controller. + +- brcm,gpio-bank-widths: + Number of GPIO lines for each bank. Number of elements must + correspond to number of banks suggested by the 'reg' property. + +Optional properties: + +- interrupts: + The interrupt shared by all GPIO lines for this controller. + +- interrupt-parent: + phandle of the parent interrupt controller + +- interrupts-extended: + Alternate form of specifying interrupts and parents that allows for + multiple parents. This takes precedence over 'interrupts' and + 'interrupt-parent'. Wakeup-capable GPIO controllers often route their + wakeup interrupt lines through a different interrupt controller than the + primary interrupt line, making this property necessary. + +- #interrupt-cells: + Should be <2>. The first cell is the GPIO number, the second should specify + flags. The following subset of flags is supported: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Valid combinations are 1, 2, 3, 4, 8. + See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +- interrupt-controller: + Marks the device node as an interrupt controller + +- wakeup-source: + GPIOs for this controller can be used as a wakeup source + +Example: + upg_gio: gpio@f040a700 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + gpio-controller; + interrupt-controller; + reg = <0xf040a700 0x80>; + interrupt-parent = <&irq0_intc>; + interrupts = <0x6>; + brcm,gpio-bank-widths = <32 32 32 24>; + }; + + upg_gio_aon: gpio@f04172c0 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio"; + gpio-controller; + interrupt-controller; + reg = <0xf04172c0 0x40>; + interrupt-parent = <&irq0_aon_intc>; + interrupts = <0x6>; + interrupts-extended = <&irq0_aon_intc 0x6>, + <&aon_pm_l2_intc 0x5>; + wakeup-source; + brcm,gpio-bank-widths = <18 4>; + }; diff --git a/kernel/Documentation/devicetree/bindings/gpio/gpio-ath79.txt b/kernel/Documentation/devicetree/bindings/gpio/gpio-ath79.txt new file mode 100644 index 000000000..c52285101 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/gpio/gpio-ath79.txt @@ -0,0 +1,38 @@ +Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller + +Required properties: +- compatible: has to be "qca,<soctype>-gpio" and one of the following + fallbacks: + - "qca,ar7100-gpio" + - "qca,ar9340-gpio" +- reg: Base address and size of the controllers memory area +- gpio-controller : Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters. +- ngpios: Should be set to the number of GPIOs available on the SoC. + +Optional properties: +- interrupt-parent: phandle of the parent interrupt controller. +- interrupts: Interrupt specifier for the controllers interrupt. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source, should be 2 + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + + gpio@18040000 { + compatible = "qca,ar9132-gpio", "qca,ar7100-gpio"; + reg = <0x18040000 0x30>; + interrupts = <2>; + + ngpios = <22>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/kernel/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt b/kernel/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt new file mode 100644 index 000000000..d7e123fc9 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt @@ -0,0 +1,50 @@ +CSR SiRFatlas7 GPIO controller bindings + +Required properties: +- compatible : "sirf,atlas7-gpio" +- reg : Address range of the pinctrl registers +- interrupts : Interrupts used by every GPIO group +- gpio-banks : How many gpio banks on this controller +- gpio-controller : Indicates this device is a GPIO controller +- interrupt-controller : Marks the device node as an interrupt controller + +The GPIO controller also acts as an interrupt controller. It uses the default +two cells specifier as described in Documentation/devicetree/bindings/ +interrupt-controller/interrupts.txt. + +Example: + + gpio_0: gpio_mediam@17040000 { + compatible = "sirf,atlas7-gpio"; + reg = <0x17040000 0x1000>; + interrupts = <0 13 0>, <0 14 0>; + + #gpio-cells = <2>; + #interrupt-cells = <2>; + + gpio-controller; + interrupt-controller; + + gpio-banks = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 32 0 0>; + gpio-ranges-group-names = "lvds_gpio_grp", + "uart_nand_gpio_grp"; + }; + + leds { + compatible = "gpio-leds"; + + led1 { + gpios = <&gpio_1 15 0>; + ... + }; + + led2 { + gpios = <&gpio_2 34 0>; + ... + }; + }; + +Please refer to gpio.txt in this directory for details of the common +gpio properties used by devices. diff --git a/kernel/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt b/kernel/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt new file mode 100644 index 000000000..170194af3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/gpio/gpio-etraxfs.txt @@ -0,0 +1,22 @@ +Axis ETRAX FS General I/O controller bindings + +Required properties: + +- compatible: one of: + - "axis,etraxfs-gio" + - "axis,artpec3-gio" +- reg: Physical base address and length of the controller's registers. +- #gpio-cells: Should be 3 + - The first cell is the gpio offset number. + - The second cell is reserved and is currently unused. + - The third cell is the port number (hex). +- gpio-controller: Marks the device node as a GPIO controller. + +Example: + + gio: gpio@b001a000 { + compatible = "axis,etraxfs-gio"; + reg = <0xb001a000 0x1000>; + gpio-controller; + #gpio-cells = <3>; + }; diff --git a/kernel/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/kernel/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt new file mode 100644 index 000000000..120bc4971 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -0,0 +1,26 @@ +* Freescale MPC512x/MPC8xxx/Layerscape GPIO controller + +Required properties: +- compatible : Should be "fsl,<soc>-gpio" + The following <soc>s are known to be supported: + mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq. +- reg : Address and length of the register set for the device +- interrupts : Should be the port interrupt shared by all 32 pins. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low + +Optional properties: +- little-endian : GPIO registers are used as little endian. If not + present registers are used as big endian by default. + +Example: + +gpio0: gpio@1100 { + compatible = "fsl,mpc5125-gpio"; + #gpio-cells = <2>; + reg = <0x1100 0x080>; + interrupts = <78 0x8>; + status = "okay"; +}; diff --git a/kernel/Documentation/devicetree/bindings/gpio/gpio-msm.txt b/kernel/Documentation/devicetree/bindings/gpio/gpio-msm.txt deleted file mode 100644 index ac20e68a0..000000000 --- a/kernel/Documentation/devicetree/bindings/gpio/gpio-msm.txt +++ /dev/null @@ -1,26 +0,0 @@ -MSM GPIO controller bindings - -Required properties: -- compatible: - - "qcom,msm-gpio" for MSM controllers -- #gpio-cells : Should be two. - - first cell is the pin number - - second cell is used to specify optional parameters (unused) -- gpio-controller : Marks the device node as a GPIO controller. -- #interrupt-cells : Should be 2. -- interrupt-controller: Mark the device node as an interrupt controller -- interrupts : Specify the TLMM summary interrupt number -- ngpio : Specify the number of MSM GPIOs - -Example: - - msmgpio: gpio@fd510000 { - compatible = "qcom,msm-gpio"; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0xfd510000 0x4000>; - interrupts = <0 208 0>; - ngpio = <150>; - }; diff --git a/kernel/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/kernel/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt index b9a42f294..13df9933f 100644 --- a/kernel/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt +++ b/kernel/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt @@ -24,6 +24,7 @@ Required properties: ti,tca6408 ti,tca6416 ti,tca6424 + ti,tca9539 exar,xra1202 Example: diff --git a/kernel/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/kernel/Documentation/devicetree/bindings/gpio/gpio-xlp.txt new file mode 100644 index 000000000..262ee4ddf --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/gpio/gpio-xlp.txt @@ -0,0 +1,47 @@ +Netlogic XLP Family GPIO +======================== + +This GPIO driver is used for following Netlogic XLP SoCs: + XLP832, XLP316, XLP208, XLP980, XLP532 + +Required properties: +------------------- + +- compatible: Should be one of the following: + - "netlogic,xlp832-gpio": For Netlogic XLP832 + - "netlogic,xlp316-gpio": For Netlogic XLP316 + - "netlogic,xlp208-gpio": For Netlogic XLP208 + - "netlogic,xlp980-gpio": For Netlogic XLP980 + - "netlogic,xlp532-gpio": For Netlogic XLP532 +- reg: Physical base address and length of the controller's registers. +- #gpio-cells: Should be two. The first cell is the pin number and the second + cell is used to specify optional parameters (currently unused). +- gpio-controller: Marks the device node as a GPIO controller. +- nr-gpios: Number of GPIO pins supported by the controller. +- interrupt-cells: Should be two. The first cell is the GPIO Number. The + second cell is used to specify flags. The following subset of flags is + supported: + - trigger type: + 1 = low to high edge triggered. + 2 = high to low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. +- interrupts: Interrupt number for this device. +- interrupt-parent: phandle of the parent interrupt controller. +- interrupt-controller: Identifies the node as an interrupt controller. + +Example: + + gpio: xlp_gpio@34000 { + compatible = "netlogic,xlp316-gpio"; + reg = <0 0x34100 0x1000 + 0 0x35100 0x1000>; + #gpio-cells = <2>; + gpio-controller; + nr-gpios = <57>; + + #interrupt-cells = <2>; + interrupt-parent = <&pic>; + interrupts = <39>; + interrupt-controller; + }; diff --git a/kernel/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/kernel/Documentation/devicetree/bindings/gpio/gpio-zynq.txt index 986371a4b..7b542657f 100644 --- a/kernel/Documentation/devicetree/bindings/gpio/gpio-zynq.txt +++ b/kernel/Documentation/devicetree/bindings/gpio/gpio-zynq.txt @@ -6,12 +6,19 @@ Required properties: - First cell is the GPIO line number - Second cell is used to specify optional parameters (unused) -- compatible : Should be "xlnx,zynq-gpio-1.0" +- compatible : Should be "xlnx,zynq-gpio-1.0" or "xlnx,zynqmp-gpio-1.0" - clocks : Clock specifier (see clock bindings for details) - gpio-controller : Marks the device node as a GPIO controller. - interrupts : Interrupt specifier (see interrupt bindings for details) - interrupt-parent : Must be core interrupt controller +- interrupt-controller : Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. The first cell is the GPIO number. + The second cell bits[3:0] is used to specify trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. - reg : Address and length of the register set for the device Example: @@ -22,5 +29,7 @@ Example: gpio-controller; interrupt-parent = <&intc>; interrupts = <0 20 4>; + interrupt-controller; + #interrupt-cells = <2>; reg = <0xe000a000 0x1000>; }; diff --git a/kernel/Documentation/devicetree/bindings/gpio/gpio.txt b/kernel/Documentation/devicetree/bindings/gpio/gpio.txt index 5788d5cf1..069cdf6f9 100644 --- a/kernel/Documentation/devicetree/bindings/gpio/gpio.txt +++ b/kernel/Documentation/devicetree/bindings/gpio/gpio.txt @@ -16,7 +16,9 @@ properties, each containing a 'gpio-list': GPIO properties should be named "[<name>-]gpios", with <name> being the purpose of this GPIO for the device. While a non-existent <name> is considered valid for compatibility reasons (resolving to the "gpios" property), it is not allowed -for new bindings. +for new bindings. Also, GPIO properties named "[<name>-]gpio" are valid and old +bindings use it, but are only supported for compatibility reasons and should not +be used for newer bindings since it has been deprecated. GPIO properties can contain one or more GPIO phandles, but only in exceptional cases should they contain more than one. If your device uses several GPIOs with @@ -52,9 +54,13 @@ only uses one. gpio-specifier may encode: bank, pin position inside the bank, whether pin is open-drain and whether pin is logically inverted. + Exact meaning of each specifier cell is controller specific, and must -be documented in the device tree binding for the device. Use the macros -defined in include/dt-bindings/gpio/gpio.h whenever possible: +be documented in the device tree binding for the device. + +Most controllers are however specifying a generic flag bitfield +in the last cell, so for these, use the macros defined in +include/dt-bindings/gpio/gpio.h whenever possible: Example of a node using GPIOs: @@ -65,6 +71,15 @@ Example of a node using GPIOs: GPIO_ACTIVE_HIGH is 0, so in this example gpio-specifier is "18 0" and encodes GPIO pin number, and GPIO flags as accepted by the "qe_pio_e" gpio-controller. +Optional standard bitfield specifiers for the last cell: + +- Bit 0: 0 means active high, 1 means active low +- Bit 1: 1 means single-ended wiring, see: + https://en.wikipedia.org/wiki/Single-ended_triode + When used with active-low, this means open drain/collector, see: + https://en.wikipedia.org/wiki/Open_collector + When used with active-high, this means open source/emitter + 1.1) GPIO specifier best practices ---------------------------------- @@ -116,6 +131,30 @@ Every GPIO controller node must contain both an empty "gpio-controller" property, and a #gpio-cells integer property, which indicates the number of cells in a gpio-specifier. +Optionally, a GPIO controller may have a "ngpios" property. This property +indicates the number of in-use slots of available slots for GPIOs. The +typical example is something like this: the hardware register is 32 bits +wide, but only 18 of the bits have a physical counterpart. The driver is +generally written so that all 32 bits can be used, but the IP block is reused +in a lot of designs, some using all 32 bits, some using 18 and some using +12. In this case, setting "ngpios = <18>;" informs the driver that only the +first 18 GPIOs, at local offset 0 .. 17, are in use. + +If these GPIOs do not happen to be the first N GPIOs at offset 0...N-1, an +additional bitmask is needed to specify which GPIOs are actually in use, +and which are dummies. The bindings for this case has not yet been +specified, but should be specified if/when such hardware appears. + +Example: + +gpio-controller@00000000 { + compatible = "foo"; + reg = <0x00000000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <18>; +} + The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism providing automatic GPIO request and configuration as part of the gpio-controller's driver probe function. diff --git a/kernel/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt b/kernel/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt new file mode 100644 index 000000000..50ec2e690 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt @@ -0,0 +1,22 @@ +Binding for the GPIO extension bus found on some LaCie/Seagate boards +(Example: 2Big/5Big Network v2, 2Big NAS). + +Required properties: +- compatible: "lacie,netxbig-gpio-ext". +- addr-gpios: GPIOs representing the address register (LSB -> MSB). +- data-gpios: GPIOs representing the data register (LSB -> MSB). +- enable-gpio: latches the new configuration (address, data) on raising edge. + +Example: + +netxbig_gpio_ext: netxbig-gpio-ext { + compatible = "lacie,netxbig-gpio-ext"; + + addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH + &gpio1 16 GPIO_ACTIVE_HIGH + &gpio1 17 GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH + &gpio1 13 GPIO_ACTIVE_HIGH + &gpio1 14 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; +}; diff --git a/kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt new file mode 100644 index 000000000..eb7cdd69e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt @@ -0,0 +1,39 @@ +NXP LPC18xx/43xx GPIO controller Device Tree Bindings +----------------------------------------------------- + +Required properties: +- compatible : Should be "nxp,lpc1850-gpio" +- reg : Address and length of the register set for the device +- clocks : Clock specifier (see clock bindings for details) +- gpio-controller : Marks the device node as a GPIO controller. +- #gpio-cells : Should be two + - First cell is the GPIO line number + - Second cell is used to specify polarity + +Optional properties: +- gpio-ranges : Mapping between GPIO and pinctrl + +Example: +#define LPC_GPIO(port, pin) (port * 32 + pin) +#define LPC_PIN(port, pin) (0x##port * 32 + pin) + +gpio: gpio@400f4000 { + compatible = "nxp,lpc1850-gpio"; + reg = <0x400f4000 0x4000>; + clocks = <&ccu1 CLK_CPU_GPIO>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl LPC_GPIO(0,0) LPC_PIN(0,0) 2>, + ... + <&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5) 7>; +}; + +gpio_joystick { + compatible = "gpio-keys-polled"; + ... + + button@0 { + ... + gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/kernel/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 38fb86f28..f60e2f477 100644 --- a/kernel/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/kernel/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -9,6 +9,7 @@ Required Properties: - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2-W) compatible GPIO controller. - "renesas,gpio-r8a7793": for R8A7793 (R-Car M2-N) compatible GPIO controller. - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller. + - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller. - "renesas,gpio-rcar": for generic R-Car GPIO controller. - reg: Base address and length of each memory resource used by the GPIO diff --git a/kernel/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt b/kernel/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt new file mode 100644 index 000000000..0dab156fc --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/gpio/zx296702-gpio.txt @@ -0,0 +1,24 @@ +ZTE ZX296702 GPIO controller + +Required properties: +- compatible : "zte,zx296702-gpio" +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters: + - bit 0 specifies polarity (0 for normal, 1 for inverted) +- gpio-controller : Marks the device node as a GPIO controller. +- interrupts : Interrupt mapping for GPIO IRQ. +- gpio-ranges : Interaction with the PINCTRL subsystem. + +gpio1: gpio@b008040 { + compatible = "zte,zx296702-gpio"; + reg = <0xb008040 0x40>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 54 2 &pmx0 2 59 14>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <2>; + clock-names = "gpio_pclk"; + clocks = <&lsp0clk ZX296702_GPIO_CLK>; +}; diff --git a/kernel/Documentation/devicetree/bindings/h8300/cpu.txt b/kernel/Documentation/devicetree/bindings/h8300/cpu.txt new file mode 100644 index 000000000..70cd58608 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/h8300/cpu.txt @@ -0,0 +1,13 @@ +* H8/300 CPU bindings + +Required properties: + +- compatible: Compatible property value should be "renesas,h8300". +- clock-frequency: Contains the clock frequency for CPU, in Hz. + +Example: + + cpu@0 { + compatible = "renesas,h8300"; + clock-frequency = <20000000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/hwlock/hwlock.txt b/kernel/Documentation/devicetree/bindings/hwlock/hwlock.txt new file mode 100644 index 000000000..085d1f5c9 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/hwlock/hwlock.txt @@ -0,0 +1,59 @@ +Generic hwlock bindings +======================= + +Generic bindings that are common to all the hwlock platform specific driver +implementations. + +Please also look through the individual platform specific hwlock binding +documentations for identifying any additional properties specific to that +platform. + +hwlock providers: +================= + +Required properties: +- #hwlock-cells: Specifies the number of cells needed to represent a + specific lock. + +hwlock users: +============= + +Consumers that require specific hwlock(s) should specify them using the +property "hwlocks", and an optional "hwlock-names" property. + +Required properties: +- hwlocks: List of phandle to a hwlock provider node and an + associated hwlock args specifier as indicated by + #hwlock-cells. The list can have just a single hwlock + or multiple hwlocks, with each hwlock represented by + a phandle and a corresponding args specifier. + +Optional properties: +- hwlock-names: List of hwlock name strings defined in the same order + as the hwlocks, with one name per hwlock. Consumers can + use the hwlock-names to match and get a specific hwlock. + + +1. Example of a node using a single specific hwlock: + +The following example has a node requesting a hwlock in the bank defined by +the node hwlock1. hwlock1 is a hwlock provider with an argument specifier +of length 1. + + node { + ... + hwlocks = <&hwlock1 2>; + ... + }; + +2. Example of a node using multiple specific hwlocks: + +The following example has a node requesting two hwlocks, a hwlock within +the hwlock device node 'hwlock1' with #hwlock-cells value of 1, and another +hwlock within the hwlock device node 'hwlock2' with #hwlock-cells value of 2. + + node { + ... + hwlocks = <&hwlock1 2>, <&hwlock2 0 3>; + ... + }; diff --git a/kernel/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/kernel/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt new file mode 100644 index 000000000..2c9804f4f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt @@ -0,0 +1,26 @@ +OMAP4+ HwSpinlock Driver +======================== + +Required properties: +- compatible: Should be "ti,omap4-hwspinlock" for + OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs +- reg: Contains the hwspinlock module register address space + (base address and length) +- ti,hwmods: Name of the hwmod associated with the hwspinlock device +- #hwlock-cells: Should be 1. The OMAP hwspinlock users will use a + 0-indexed relative hwlock number as the argument + specifier value for requesting a specific hwspinlock + within a hwspinlock bank. + +Please look at the generic hwlock binding for usage information for consumers, +"Documentation/devicetree/bindings/hwlock/hwlock.txt" + +Example: + +/* OMAP4 */ +hwspinlock: spinlock@4a0f6000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x4a0f6000 0x1000>; + ti,hwmods = "spinlock"; + #hwlock-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt b/kernel/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt new file mode 100644 index 000000000..4563f5245 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt @@ -0,0 +1,39 @@ +Qualcomm Hardware Mutex Block: + +The hardware block provides mutexes utilized between different processors on +the SoC as part of the communication protocol used by these processors. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,sfpb-mutex", + "qcom,tcsr-mutex" + +- syscon: + Usage: required + Value type: <prop-encoded-array> + Definition: one cell containing: + syscon phandle + offset of the hwmutex block within the syscon + stride of the hwmutex registers + +- #hwlock-cells: + Usage: required + Value type: <u32> + Definition: must be 1, the specified cell represent the lock id + (hwlock standard property, see hwlock.txt) + +Example: + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + hwlock@fd484000 { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; + + #hwlock-cells = <1>; + }; diff --git a/kernel/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt b/kernel/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt new file mode 100644 index 000000000..9bb1240a6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt @@ -0,0 +1,28 @@ +SIRF Hardware spinlock device Binding +----------------------------------------------- + +Required properties : +- compatible : shall contain only one of the following: + "sirf,hwspinlock" + +- reg : the register address of hwspinlock + +- #hwlock-cells : hwlock users only use the hwlock id to represent a specific + hwlock, so the number of cells should be <1> here. + +Please look at the generic hwlock binding for usage information for consumers, +"Documentation/devicetree/bindings/hwlock/hwlock.txt" + +Example of hwlock provider: + hwlock { + compatible = "sirf,hwspinlock"; + reg = <0x13240000 0x00010000>; + #hwlock-cells = <1>; + }; + +Example of hwlock users: + node { + ... + hwlocks = <&hwlock 2>; + ... + }; diff --git a/kernel/Documentation/devicetree/bindings/i2c/ina2xx.txt b/kernel/Documentation/devicetree/bindings/hwmon/ina2xx.txt index a2ad85d7e..9bcd5e878 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/ina2xx.txt +++ b/kernel/Documentation/devicetree/bindings/hwmon/ina2xx.txt @@ -2,6 +2,7 @@ ina2xx properties Required properties: - compatible: Must be one of the following: + - "ti,ina209" for ina209 - "ti,ina219" for ina219 - "ti,ina220" for ina220 - "ti,ina226" for ina226 diff --git a/kernel/Documentation/devicetree/bindings/hwmon/lm70.txt b/kernel/Documentation/devicetree/bindings/hwmon/lm70.txt new file mode 100644 index 000000000..e7fd921aa --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/hwmon/lm70.txt @@ -0,0 +1,21 @@ +* LM70/TMP121/LM71/LM74 thermometer. + +Required properties: +- compatible: one of + "ti,lm70" + "ti,tmp121" + "ti,lm71" + "ti,lm74" + +See Documentation/devicetree/bindings/spi/spi-bus.txt for more required and +optional properties. + +Example: + +spi_master { + temperature-sensor@0 { + compatible = "ti,lm70"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/kernel/Documentation/devicetree/bindings/hwmon/ltc2978.txt index ed2f09dc2..a7afbf60b 100644 --- a/kernel/Documentation/devicetree/bindings/hwmon/ltc2978.txt +++ b/kernel/Documentation/devicetree/bindings/hwmon/ltc2978.txt @@ -3,10 +3,16 @@ ltc2978 Required properties: - compatible: should contain one of: * "lltc,ltc2974" + * "lltc,ltc2975" * "lltc,ltc2977" * "lltc,ltc2978" + * "lltc,ltc2980" * "lltc,ltc3880" + * "lltc,ltc3882" * "lltc,ltc3883" + * "lltc,ltc3886" + * "lltc,ltc3887" + * "lltc,ltm2987" * "lltc,ltm4676" - reg: I2C slave address @@ -17,10 +23,10 @@ Optional properties: standard binding for regulators; see regulator.txt. Valid names of regulators depend on number of supplies supported per device: - * ltc2974 : vout0 - vout3 - * ltc2977 : vout0 - vout7 + * ltc2974, ltc2975 : vout0 - vout3 + * ltc2977, ltc2980, ltm2987 : vout0 - vout7 * ltc2978 : vout0 - vout7 - * ltc3880 : vout0 - vout1 + * ltc3880, ltc3882, ltc3886 : vout0 - vout1 * ltc3883 : vout0 * ltm4676 : vout0 - vout1 diff --git a/kernel/Documentation/devicetree/bindings/i2c/max6697.txt b/kernel/Documentation/devicetree/bindings/hwmon/max6697.txt index 5f793998e..5f793998e 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/max6697.txt +++ b/kernel/Documentation/devicetree/bindings/hwmon/max6697.txt diff --git a/kernel/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/kernel/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index fcca8e744..a04a80f9c 100644 --- a/kernel/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/kernel/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -9,6 +9,7 @@ Requires node properties: "murata,ncp21wb473" "murata,ncp03wb473" "murata,ncp15wl333" + "murata,ncp03wf104" /* Usage of vendor name "ntc" is deprecated */ <DEPRECATED> "ntc,ncp15wb473" diff --git a/kernel/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/kernel/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index 610757ce4..c6d533202 100644 --- a/kernel/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/kernel/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -3,10 +3,35 @@ Bindings for a fan connected to the PWM lines Required properties: - compatible : "pwm-fan" - pwms : the PWM that is used to control the PWM fan +- cooling-levels : PWM duty cycle values in a range from 0 to 255 + which correspond to thermal cooling states Example: - pwm-fan { + fan0: pwm-fan { compatible = "pwm-fan"; - status = "okay"; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; pwms = <&pwm 0 10000 0>; + cooling-levels = <0 102 170 230>; }; + + thermal-zones { + cpu_thermal: cpu-thermal { + thermal-sensors = <&tmu 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + cpu_alert1: cpu-alert1 { + temperature = <100000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 0 1>; + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-at91.txt index 388f0a275..6e81dc153 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -2,8 +2,8 @@ I2C for Atmel platforms Required properties : - compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c", - "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c" - or "atmel,at91sam9x5-i2c" + "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c", + "atmel,at91sam9x5-i2c" or "atmel,sama5d2-i2c" - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. @@ -13,6 +13,10 @@ Required properties : Optional properties: - clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000 +- dmas: A list of two dma specifiers, one for each entry in dma-names. +- dma-names: should contain "tx" and "rx". +- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO + capable I2C controllers. - Child nodes conforming to i2c bus binding Examples : @@ -32,3 +36,25 @@ i2c0: i2c@fff84000 { pagesize = <128>; } } + +i2c0: i2c@f8034600 { + compatible = "atmel,sama5d2-i2c"; + reg = <0xf8034600 0x100>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(11)>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) + AT91_XDMAC_DT_PERID(12)>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0>; + atmel,fifo-size = <16>; + + wm8731: wm8731@1a { + compatible = "wm8731"; + reg = <0x1a>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt new file mode 100644 index 000000000..d6f724efd --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt @@ -0,0 +1,28 @@ +Broadcom stb bsc iic master controller + +Required properties: + +- compatible: should be "brcm,brcmstb-i2c" +- clock-frequency: 32-bit decimal value of iic master clock freqency in Hz + valid values are 375000, 390000, 187500, 200000 + 93750, 97500, 46875 and 50000 +- reg: specifies the base physical address and size of the registers + +Optional properties : + +- interrupt-parent: specifies the phandle to the parent interrupt controller + this one is cascaded from +- interrupts: specifies the interrupt number, the irq line to be used +- interrupt-names: Interrupt name string + +Example: + +bsca: i2c@f0406200 { + clock-frequency = <390000>; + compatible = "brcm,brcmstb-i2c"; + interrupt-parent = <&irq0_intc>; + reg = <0xf0406200 0x58>; + interrupts = <0x18>; + interrupt-names = "upg_bsca"; +}; + diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-cadence.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-cadence.txt index 7cb0b5608..ebaa90c58 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/i2c-cadence.txt +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-cadence.txt @@ -2,7 +2,11 @@ Binding for the Cadence I2C controller Required properties: - reg: Physical base address and size of the controller's register area. - - compatible: Compatibility string. Must be 'cdns,i2c-r1p10'. + - compatible: Should contain one of: + * "cdns,i2c-r1p10" + Note: Use this when cadence i2c controller version 1.0 is used. + * "cdns,i2c-r1p14" + Note: Use this when cadence i2c controller version 1.4 is used. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt bindings. - #address-cells: Should be 1. diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-davinci.txt index a4e1cbc81..5b123e0e4 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/i2c-davinci.txt +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -1,10 +1,10 @@ -* Texas Instruments Davinci I2C +* Texas Instruments Davinci/Keystone I2C This file provides information, what the device node for the -davinci i2c interface contain. +davinci/keystone i2c interface contains. Required properties: -- compatible: "ti,davinci-i2c"; +- compatible: "ti,davinci-i2c" or "ti,keystone-i2c"; - reg : Offset and length of the register set for the device Recommended properties : diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-emev2.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-emev2.txt new file mode 100644 index 000000000..5ed1ea1c7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-emev2.txt @@ -0,0 +1,22 @@ +Device tree configuration for Renesas EMEV2 IIC controller + +Required properties: +- compatible : "renesas,iic-emev2" +- reg : address start and address range size of device +- interrupts : specifier for the IIC controller interrupt +- clocks : phandle to the IP core SCLK +- clock-names : must be "sclk" +- #address-cells : should be <1> +- #size-cells : should be <0> + +Example: + + iic0: i2c@e0070000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-emev2"; + reg = <0xe0070000 0x28>; + interrupts = <0 32 IRQ_TYPE_EDGE_RISING>; + clocks = <&iic0_sclk>; + clock-names = "sclk"; + }; diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-imx.txt index ce4311d72..eab5836ba 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/i2c-imx.txt +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-imx.txt @@ -14,6 +14,10 @@ Optional properties: The absence of the propoerty indicates the default frequency 100 kHz. - dmas: A list of two dma specifiers, one for each entry in dma-names. - dma-names: should contain "tx" and "rx". +- scl-gpios: specify the gpio related to SCL pin +- sda-gpios: specify the gpio related to SDA pin +- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c + bus recovery, call it "gpio" state Examples: @@ -37,4 +41,9 @@ i2c0: i2c@40066000 { /* i2c0 on vf610 */ dmas = <&edma0 0 50>, <&edma0 0 51>; dma-names = "rx","tx"; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; }; diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt new file mode 100644 index 000000000..4101aa621 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt @@ -0,0 +1,33 @@ +NXP I2C controller for LPC2xxx/178x/18xx/43xx + +Required properties: + - compatible: must be "nxp,lpc1788-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + +Optional properties: +- clock-frequency: the desired I2C bus clock frequency in Hz; in + absence of this property the default value is used (100 kHz). + +Example: +i2c0: i2c@400a1000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400a1000 0x1000>; + interrupts = <18>; + clocks = <&ccu1 CLK_APB1_I2C0>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c0 { + clock-frequency = <400000>; + + lm75@48 { + compatible = "nxp,lm75"; + reg = <0x48>; + }; +}; + diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt new file mode 100644 index 000000000..0ce6fa324 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt @@ -0,0 +1,41 @@ +* Mediatek's I2C controller + +The Mediatek's I2C controller is used to interface with I2C devices. + +Required properties: + - compatible: value should be either of the following. + (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c. + (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c. + (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c. + (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c. + (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c. + - reg: physical base address of the controller and dma base, length of memory + mapped region. + - interrupts: interrupt number to the cpu. + - clock-div: the fixed value for frequency divider of clock source in i2c + module. Each IC may be different. + - clocks: clock name from clock manager + - clock-names: Must include "main" and "dma", if enable have-pmic need include + "pmic" extra. + +Optional properties: + - clock-frequency: Frequency in Hz of the bus when transfer, the default value + is 100000. + - mediatek,have-pmic: platform can control i2c form special pmic side. + Only mt6589 and mt8135 support this feature. + - mediatek,use-push-pull: IO config use push-pull mode. + +Example: + + i2c0: i2c@1100d000 { + compatible = "mediatek,mt6577-i2c"; + reg = <0x1100d000 0x70>, + <0x11000300 0x80>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; + clock-frequency = <400000>; + mediatek,have-pmic; + clock-div = <16>; + clocks = <&i2c0_ck>, <&ap_dma_ck>; + clock-names = "main", "dma"; + }; + diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt new file mode 100644 index 000000000..688783fbe --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt @@ -0,0 +1,74 @@ +Register-based I2C Bus Mux + +This binding describes an I2C bus multiplexer that uses a single register +to route the I2C signals. + +Required properties: +- compatible: i2c-mux-reg +- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side + port is connected to. +* Standard I2C mux properties. See mux.txt in this directory. +* I2C child bus nodes. See mux.txt in this directory. + +Optional properties: +- reg: this pair of <offset size> specifies the register to control the mux. + The <offset size> depends on its parent node. It can be any memory-mapped + address. The size must be either 1, 2, or 4 bytes. If reg is omitted, the + resource of this device will be used. +- little-endian: The existence indicates the register is in little endian. +- big-endian: The existence indicates the register is in big endian. + If both little-endian and big-endian are omitted, the endianness of the + CPU will be used. +- write-only: The existence indicates the register is write-only. +- idle-state: value to set the muxer to when idle. When no value is + given, it defaults to the last value used. + +Whenever an access is made to a device on a child bus, the value set +in the revelant node's reg property will be output to the register. + +If an idle state is defined, using the idle-state (optional) property, +whenever an access is not being made to a device on a child bus, the +register will be set according to the idle value. + +If an idle state is not defined, the most recently used value will be +left programmed into the register. + +Example of a mux on PCIe card, the host is a powerpc SoC (big endian): + + i2c-mux { + /* the <offset size> depends on the address translation + * of the parent device. If omitted, device resource + * will be used instead. The size is to determine + * whether iowrite32, iowrite16, or iowrite8 will be used. + */ + reg = <0x6028 0x4>; + little-endian; /* little endian register on PCIe */ + compatible = "i2c-mux-reg"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c1>; + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + si5338: clock-generator@70 { + compatible = "silabs,si5338"; + reg = <0x70>; + /* other stuff */ + }; + }; + + i2c@1 { + /* data is written using iowrite32 */ + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + si5338: clock-generator@70 { + compatible = "silabs,si5338"; + reg = <0x70>; + /* other stuff */ + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index 16b3e07aa..ea406eb20 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -10,6 +10,7 @@ Required properties: "renesas,i2c-r8a7792" "renesas,i2c-r8a7793" "renesas,i2c-r8a7794" + "renesas,i2c-r8a7795" - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt specifier. diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt index 2bfc6e7ed..214f94c25 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt @@ -10,6 +10,7 @@ Required properties: - "renesas,iic-r8a7792" (R-Car V2H) - "renesas,iic-r8a7793" (R-Car M2-N) - "renesas,iic-r8a7794" (R-Car E2) + - "renesas,iic-r8a7795" (R-Car H3) - "renesas,iic-sh73a0" (SH-Mobile AG5) - reg : address start and address range size of device - interrupts : interrupt of device diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt new file mode 100644 index 000000000..27fc6f8c7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt @@ -0,0 +1,25 @@ +UniPhier I2C controller (FIFO-builtin) + +Required properties: +- compatible: should be "socionext,uniphier-fi2c". +- #address-cells: should be 1. +- #size-cells: should be 0. +- reg: offset and length of the register set for the device. +- interrupts: a single interrupt specifier. +- clocks: phandle to the input clock. + +Optional properties: +- clock-frequency: desired I2C bus frequency in Hz. The maximum supported + value is 400000. Defaults to 100000 if not specified. + +Examples: + + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt new file mode 100644 index 000000000..26f9d95b3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-uniphier.txt @@ -0,0 +1,25 @@ +UniPhier I2C controller (FIFO-less) + +Required properties: +- compatible: should be "socionext,uniphier-i2c". +- #address-cells: should be 1. +- #size-cells: should be 0. +- reg: offset and length of the register set for the device. +- interrupts: a single interrupt specifier. +- clocks: phandle to the input clock. + +Optional properties: +- clock-frequency: desired I2C bus frequency in Hz. The maximum supported + value is 400000. Defaults to 100000 if not specified. + +Examples: + + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + clocks = <&i2c_clk>; + clock-frequency = <100000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt new file mode 100644 index 000000000..f6b2c20cf --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt @@ -0,0 +1,15 @@ +APM X-Gene SLIMpro Mailbox I2C Driver + +An I2C controller accessed over the "SLIMpro" mailbox. + +Required properties : + + - compatible : should be "apm,xgene-slimpro-i2c" + - mboxes : use the label reference for the mailbox as the first parameter. + The second parameter is the channel number. + +Example : + i2cslimpro { + compatible = "apm,xgene-slimpro-i2c"; + mboxes = <&mailbox 0>; + }; diff --git a/kernel/Documentation/devicetree/bindings/i2c/i2c.txt b/kernel/Documentation/devicetree/bindings/i2c/i2c.txt new file mode 100644 index 000000000..8a99150ac --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/i2c/i2c.txt @@ -0,0 +1,45 @@ +Generic device tree bindings for I2C busses +=========================================== + +This document describes generic bindings which can be used to describe I2C +busses in a device tree. + +Required properties +------------------- + +- #address-cells - should be <1>. Read more about addresses below. +- #size-cells - should be <0>. +- compatible - name of I2C bus controller following generic names + recommended practice. + +For other required properties e.g. to describe register sets, +clocks, etc. check the binding documentation of the specific driver. + +The cells properties above define that an address of children of an I2C bus +are described by a single value. This is usually a 7 bit address. However, +flags can be attached to the address. I2C_TEN_BIT_ADDRESS is used to mark a 10 +bit address. It is needed to avoid the ambiguity between e.g. a 7 bit address +of 0x50 and a 10 bit address of 0x050 which, in theory, can be on the same bus. +Another flag is I2C_OWN_SLAVE_ADDRESS to mark addresses on which we listen to +be devices ourselves. + +Optional properties +------------------- + +These properties may not be supported by all drivers. However, if a driver +wants to support one of the below features, it should adapt the bindings below. + +- clock-frequency - frequency of bus clock in Hz. +- wakeup-source - device can be used as a wakeup source. + +- interrupts - interrupts used by the device. +- interrupt-names - "irq" and "wakeup" names are recognized by I2C core, + other names are left to individual drivers. + +Binding may contain optional "interrupts" property, describing interrupts +used by the device. I2C core will assign "irq" interrupt (or the very first +interrupt if not using interrupt names) as primary interrupt for the slave. + +Also, if device is marked as a wakeup source, I2C core will set up "wakeup" +interrupt for the device. If "wakeup" interrupt name is not present in the +binding, then primary interrupt will be used as wakeup interrupt. diff --git a/kernel/Documentation/devicetree/bindings/i2c/ina209.txt b/kernel/Documentation/devicetree/bindings/i2c/ina209.txt deleted file mode 100644 index 9dd2bee80..000000000 --- a/kernel/Documentation/devicetree/bindings/i2c/ina209.txt +++ /dev/null @@ -1,18 +0,0 @@ -ina209 properties - -Required properties: -- compatible: Must be "ti,ina209" -- reg: I2C address - -Optional properties: - -- shunt-resistor - Shunt resistor value in micro-Ohm - -Example: - -temp-sensor@4c { - compatible = "ti,ina209"; - reg = <0x4c>; - shunt-resistor = <5000>; -}; diff --git a/kernel/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/kernel/Documentation/devicetree/bindings/i2c/trivial-devices.txt index ad0c4ac91..c50cf13c8 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/kernel/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -19,8 +19,7 @@ adi,adt7475 +/-1C TDM Extended Temp Range I.C adi,adt7476 +/-1C TDM Extended Temp Range I.C adi,adt7490 +/-1C TDM Extended Temp Range I.C adi,adxl345 Three-Axis Digital Accelerometer -adi,adxl346 Three-Axis Digital Accelerometer -adi,adxl34x Three-Axis Digital Accelerometer +adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too) at,24c08 i2c serial eeprom (24cxx) atmel,24c00 i2c serial eeprom (24cxx) atmel,24c01 i2c serial eeprom (24cxx) @@ -55,7 +54,6 @@ epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer -fsl,mma8452 MMA8452Q: 3-axis 12-bit / 8-bit Digital Accelerometer fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface @@ -81,6 +79,7 @@ oki,ml86v7667 OKI ML86V7667 video decoder ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus pericom,pt7c4338 Real-time Clock Module plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch +pulsedlight,lidar-lite-v2 Pulsedlight LIDAR range-finding sensor ramtron,24c64 i2c serial eeprom (24cxx) ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC @@ -89,6 +88,7 @@ ricoh,rs5c372b I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c386 I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) +sgx,vz89x SGX Sensortech VZ89X Sensors sii,s35390a 2-wire CMOS real-time clock skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply st-micro,24c256 i2c serial eeprom (24cxx) @@ -96,6 +96,8 @@ stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface +ti,ads7828 8-Channels, 12-bit ADC +ti,ads7830 8-Channels, 8-bit ADC ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/kernel/Documentation/devicetree/bindings/iio/accel/bma180.txt b/kernel/Documentation/devicetree/bindings/iio/accel/bma180.txt index c5933573e..4a3679d54 100644 --- a/kernel/Documentation/devicetree/bindings/iio/accel/bma180.txt +++ b/kernel/Documentation/devicetree/bindings/iio/accel/bma180.txt @@ -1,10 +1,11 @@ -* Bosch BMA180 triaxial acceleration sensor +* Bosch BMA180 / BMA250 triaxial acceleration sensor http://omapworld.com/BMA180_111_1002839.pdf +http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf Required properties: - - compatible : should be "bosch,bma180" + - compatible : should be "bosch,bma180" or "bosch,bma250" - reg : the I2C address of the sensor Optional properties: @@ -13,6 +14,9 @@ Optional properties: - interrupts : interrupt mapping for GPIO IRQ, it should by configured with flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING + For the bma250 the first interrupt listed must be the one + connected to the INT1 pin, the second (optional) interrupt + listed must be the one connected to the INT2 pin. Example: diff --git a/kernel/Documentation/devicetree/bindings/misc/lis302.txt b/kernel/Documentation/devicetree/bindings/iio/accel/lis302.txt index 2a19bff96..2a19bff96 100644 --- a/kernel/Documentation/devicetree/bindings/misc/lis302.txt +++ b/kernel/Documentation/devicetree/bindings/iio/accel/lis302.txt diff --git a/kernel/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/kernel/Documentation/devicetree/bindings/iio/accel/mma8452.txt new file mode 100644 index 000000000..e3c37467d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iio/accel/mma8452.txt @@ -0,0 +1,24 @@ +Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer + +Required properties: + + - compatible: should contain one of + * "fsl,mma8452" + * "fsl,mma8453" + * "fsl,mma8652" + * "fsl,mma8653" + - reg: the I2C address of the chip + +Optional properties: + + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: interrupt mapping for GPIO IRQ + +Example: + + mma8453fc@1d { + compatible = "fsl,mma8453"; + reg = <0x1d>; + interrupt-parent = <&gpio1>; + interrupts = <5 0>; + }; diff --git a/kernel/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt b/kernel/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt new file mode 100644 index 000000000..908334c6b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt @@ -0,0 +1,19 @@ +* Berlin Analog to Digital Converter (ADC) + +The Berlin ADC has 8 channels, with one connected to a temperature sensor. +It is part of the system controller register set. The ADC node should be a +sub-node of the system controller node. + +Required properties: +- compatible: must be "marvell,berlin2-adc" +- interrupts: the interrupts for the ADC and the temperature sensor +- interrupt-names: should be "adc" and "tsen" + +Example: + +adc: adc { + compatible = "marvell,berlin2-adc"; + interrupt-parent = <&sic>; + interrupts = <12>, <14>; + interrupt-names = "adc", "tsen"; +}; diff --git a/kernel/Documentation/devicetree/bindings/iio/adc/hi8435.txt b/kernel/Documentation/devicetree/bindings/iio/adc/hi8435.txt new file mode 100644 index 000000000..3b0348c5e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iio/adc/hi8435.txt @@ -0,0 +1,21 @@ +Holt Integrated Circuits HI-8435 threshold detector bindings + +Required properties: + - compatible: should be "holt,hi8435" + - reg: spi chip select number for the device + +Recommended properties: + - spi-max-frequency: definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: + - gpios: GPIO used for controlling the reset pin + +Example: +sensor@0 { + compatible = "holt,hi8435"; + reg = <0>; + gpios = <&gpio6 1 0>; + + spi-max-frequency = <1000000>; +}; diff --git a/kernel/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/kernel/Documentation/devicetree/bindings/iio/adc/mcp320x.txt index b85184391..2a1f3af30 100644 --- a/kernel/Documentation/devicetree/bindings/iio/adc/mcp320x.txt +++ b/kernel/Documentation/devicetree/bindings/iio/adc/mcp320x.txt @@ -18,6 +18,7 @@ Required properties: "mcp3202" "mcp3204" "mcp3208" + "mcp3301" Examples: diff --git a/kernel/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/kernel/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt index 42ca7deec..15ca6b479 100644 --- a/kernel/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt +++ b/kernel/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt @@ -1,7 +1,7 @@ -* Texas Instruments' ADC128S052 ADC chip +* Texas Instruments' ADC128S052 and ADC122S021 ADC chip Required properties: - - compatible: Should be "ti,adc128s052" + - compatible: Should be "ti,adc128s052" or "ti,adc122s021" - reg: spi chip select number for the device - vref-supply: The regulator supply for ADC reference voltage diff --git a/kernel/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/kernel/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt index 1a4a43d5c..1aad0514e 100644 --- a/kernel/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt +++ b/kernel/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt @@ -11,6 +11,18 @@ Required properties: - clock-names: Must contain "adc", matching entry in the clocks property. - vref-supply: The regulator supply ADC reference voltage. +Recommended properties: +- fsl,adck-max-frequency: Maximum frequencies according to datasheets operating + requirements. Three values are required, depending on conversion mode: + - Frequency in normal mode (ADLPC=0, ADHSC=0) + - Frequency in high-speed mode (ADLPC=0, ADHSC=1) + - Frequency in low-power mode (ADLPC=1, ADHSC=0) +- min-sample-time: Minimum sampling time in nanoseconds. This value has + to be chosen according to the conversion mode and the connected analog + source resistance (R_as) and capacitance (C_as). Refer the datasheet's + operating requirements. A safe default across a wide range of R_as and + C_as as well as conversion modes is 1000ns. + Example: adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; @@ -18,5 +30,7 @@ adc0: adc@4003b000 { interrupts = <0 53 0x04>; clocks = <&clks VF610_CLK_ADC0>; clock-names = "adc"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; vref-supply = <®_vcc_3v3_mcu>; }; diff --git a/kernel/Documentation/devicetree/bindings/misc/ti,dac7512.txt b/kernel/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt index 1db45939d..1db45939d 100644 --- a/kernel/Documentation/devicetree/bindings/misc/ti,dac7512.txt +++ b/kernel/Documentation/devicetree/bindings/iio/dac/ti,dac7512.txt diff --git a/kernel/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt b/kernel/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt new file mode 100644 index 000000000..e4d8f1c52 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iio/imu/inv_mpu6050.txt @@ -0,0 +1,17 @@ +InvenSense MPU-6050 Six-Axis (Gyro + Accelerometer) MEMS MotionTracking Device + +http://www.invensense.com/mems/gyro/mpu6050.html + +Required properties: + - compatible : should be "invensense,mpu6050" + - reg : the I2C address of the sensor + - interrupt-parent : should be the phandle for the interrupt controller + - interrupts : interrupt mapping for GPIO IRQ + +Example: + mpu6050@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&gpio1>; + interrupts = <18 1>; + }; diff --git a/kernel/Documentation/devicetree/bindings/iio/light/apds9960.txt b/kernel/Documentation/devicetree/bindings/iio/light/apds9960.txt new file mode 100644 index 000000000..174b709f1 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iio/light/apds9960.txt @@ -0,0 +1,22 @@ +* Avago APDS9960 gesture/RGB/ALS/proximity sensor + +http://www.avagotech.com/docs/AV02-4191EN + +Required properties: + + - compatible: must be "avago,apds9960" + - reg: the I2c address of the sensor + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts : the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + +Example: + +apds9960@39 { + compatible = "avago,apds9960"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <16 1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/iio/light/us5182d.txt b/kernel/Documentation/devicetree/bindings/iio/light/us5182d.txt new file mode 100644 index 000000000..6f0a53014 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iio/light/us5182d.txt @@ -0,0 +1,34 @@ +* UPISEMI us5182d I2C ALS and Proximity sensor + +Required properties: +- compatible: must be "upisemi,usd5182" +- reg: the I2C address of the device + +Optional properties: +- upisemi,glass-coef: glass attenuation factor - compensation factor of + resolution 1000 for material transmittance. +- upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc + counts) corresponding to every scale. +- upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4 + fractional bits - Q4.4) applied when light > threshold +- upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4 + fractional bits - Q4.4) applied when light < threshold + +If the optional properties are not specified these factors will default to the +values in the below example. +The glass-coef defaults to no compensation for the covering material. +The threshold array defaults to experimental values that work with US5182D +sensor on evaluation board - roughly between 12-32 lux. +There will be no dark-gain compensation by default when ALS > thresh +(0 * dark-gain), and a 1.35 compensation factor when ALS < thresh. + +Example: + + usd5182@39 { + compatible = "upisemi,usd5182"; + reg = <0x39>; + upisemi,glass-coef = < 1000 >; + upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>; + upisemi,upper-dark-gain = /bits/ 8 <0x00>; + upisemi,lower-dark-gain = /bits/ 8 <0x16>; + }; diff --git a/kernel/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/kernel/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt new file mode 100644 index 000000000..9f263b7df --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt @@ -0,0 +1,22 @@ +* Bosch BMC150 magnetometer sensor + +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf + +Required properties: + + - compatible : should be "bosch,bmc150_magn" + - reg : the I2C address of the magnetometer + +Optional properties: + + - interrupt-parent : phandle to the parent interrupt controller + - interrupts : interrupt mapping for GPIO IRQ + +Example: + +bmc150_magn@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + interrupt-parent = <&gpio1>; + interrupts = <0 1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt b/kernel/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt new file mode 100644 index 000000000..a01235c7f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iio/magnetometer/mmc35240.txt @@ -0,0 +1,13 @@ +* MEMSIC MMC35240 magnetometer sensor + +Required properties: + + - compatible : should be "memsic,mmc35240" + - reg : the I2C address of the magnetometer + +Example: + +mmc35240@30 { + compatible = "memsic,mmc35240"; + reg = <0x30>; +}; diff --git a/kernel/Documentation/devicetree/bindings/misc/bmp085.txt b/kernel/Documentation/devicetree/bindings/iio/pressure/bmp085.txt index d7a6deb6b..d7a6deb6b 100644 --- a/kernel/Documentation/devicetree/bindings/misc/bmp085.txt +++ b/kernel/Documentation/devicetree/bindings/iio/pressure/bmp085.txt diff --git a/kernel/Documentation/devicetree/bindings/iio/st-sensors.txt b/kernel/Documentation/devicetree/bindings/iio/st-sensors.txt index d2aaca974..d3ccdb190 100644 --- a/kernel/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/kernel/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -30,10 +30,12 @@ Accelerometers: - st,lsm330d-accel - st,lsm330dl-accel - st,lsm330dlc-accel +- st,lis331dl-accel - st,lis331dlh-accel - st,lsm303dl-accel - st,lsm303dlm-accel - st,lsm330-accel +- st,lsm303agr-accel Gyroscopes: - st,l3g4200d-gyro @@ -45,6 +47,8 @@ Gyroscopes: - st,lsm330-gyro Magnetometers: +- st,lsm303agr-magn +- st,lsm303dlh-magn - st,lsm303dlhc-magn - st,lsm303dlm-magn - st,lis3mdl-magn diff --git a/kernel/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt b/kernel/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt new file mode 100644 index 000000000..9be57b036 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iio/temperature/mlx90614.txt @@ -0,0 +1,24 @@ +* Melexis MLX90614 contactless IR temperature sensor + +http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx + +Required properties: + + - compatible: should be "melexis,mlx90614" + - reg: the I2C address of the sensor + +Optional properties: + + - wakeup-gpios: device tree identifier of the GPIO connected to the SDA line + to hold low in order to wake up the device. In normal operation, the + GPIO is set as input and will not interfere in I2C communication. There + is no need for a GPIO driving the SCL line. If no GPIO is given, power + management is disabled. + +Example: + +mlx90614@5a { + compatible = "melexis,mlx90614"; + reg = <0x5a>; + wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; +}; diff --git a/kernel/Documentation/devicetree/bindings/input/ads7846.txt b/kernel/Documentation/devicetree/bindings/input/ads7846.txt index 5f7619c22..33a1638b6 100644 --- a/kernel/Documentation/devicetree/bindings/input/ads7846.txt +++ b/kernel/Documentation/devicetree/bindings/input/ads7846.txt @@ -64,7 +64,8 @@ Optional properties: pendown-gpio (u32). pendown-gpio GPIO handle describing the pin the !PENIRQ line is connected to. - linux,wakeup use any event on touchscreen as wakeup event. + wakeup-source use any event on touchscreen as wakeup event. + (Legacy property support: "linux,wakeup") Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: @@ -86,6 +87,6 @@ Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC:: ti,x-plate-ohms = /bits/ 16 <40>; ti,pressure-max = /bits/ 16 <255>; - linux,wakeup; + wakeup-source; }; }; diff --git a/kernel/Documentation/devicetree/bindings/input/cap11xx.txt b/kernel/Documentation/devicetree/bindings/input/cap11xx.txt index 7d0a30097..8c67a0b50 100644 --- a/kernel/Documentation/devicetree/bindings/input/cap11xx.txt +++ b/kernel/Documentation/devicetree/bindings/input/cap11xx.txt @@ -55,5 +55,24 @@ i2c_controller { <105>, /* KEY_LEFT */ <109>, /* KEY_PAGEDOWN */ <104>; /* KEY_PAGEUP */ + + #address-cells = <1>; + #size-cells = <0>; + + usr@0 { + label = "cap11xx:green:usr0"; + reg = <0>; + }; + + usr@1 { + label = "cap11xx:green:usr1"; + reg = <1>; + }; + + alive@2 { + label = "cap11xx:green:alive"; + reg = <2>; + linux,default_trigger = "heartbeat"; + }; }; } diff --git a/kernel/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/kernel/Documentation/devicetree/bindings/input/cypress,cyapa.txt new file mode 100644 index 000000000..8d91ba9ff --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/input/cypress,cyapa.txt @@ -0,0 +1,44 @@ +Cypress I2C Touchpad + +Required properties: +- compatible: must be "cypress,cyapa". +- reg: I2C address of the chip. +- interrupt-parent: a phandle for the interrupt controller (see interrupt + binding[0]). +- interrupts: interrupt to which the chip is connected (see interrupt + binding[0]). + +Optional properties: +- wakeup-source: touchpad can be used as a wakeup source. +- pinctrl-names: should be "default" (see pinctrl binding [1]). +- pinctrl-0: a phandle pointing to the pin settings for the device (see + pinctrl binding [1]). +- vcc-supply: a phandle for the regulator supplying 3.3V power. + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +Example: + &i2c0 { + /* ... */ + + /* Cypress Gen3 touchpad */ + touchpad@67 { + compatible = "cypress,cyapa"; + reg = <0x67>; + interrupt-parent = <&gpio>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */ + wakeup-source; + }; + + /* Cypress Gen5 and later touchpad */ + touchpad@24 { + compatible = "cypress,cyapa"; + reg = <0x24>; + interrupt-parent = <&gpio>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO 2 */ + wakeup-source; + }; + + /* ... */ + }; diff --git a/kernel/Documentation/devicetree/bindings/input/da9062-onkey.txt b/kernel/Documentation/devicetree/bindings/input/da9062-onkey.txt new file mode 100644 index 000000000..ab0e0488f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/input/da9062-onkey.txt @@ -0,0 +1,32 @@ +* Dialog DA9062/63 OnKey Module + +This module is part of the DA9062/DA9063. For more details about entire +chips see Documentation/devicetree/bindings/mfd/da9062.txt and +Documentation/devicetree/bindings/mfd/da9063.txt + +This module provides KEY_POWER, KEY_SLEEP and events. + +Required properties: + +- compatible: should be one of: + dlg,da9062-onkey + dlg,da9063-onkey + +Optional properties: + + - dlg,disable-key-power : Disable power-down using a long key-press. If this + entry exists the OnKey driver will remove support for the KEY_POWER key + press. If this entry does not exist then by default the key-press + triggered power down is enabled and the OnKey will support both KEY_POWER + and KEY_SLEEP. + +Example: + + pmic0: da9062@58 { + + onkey { + compatible = "dlg,da9063-onkey"; + dlg,disable-key-power; + }; + + }; diff --git a/kernel/Documentation/devicetree/bindings/input/elants_i2c.txt b/kernel/Documentation/devicetree/bindings/input/elants_i2c.txt index a765232e6..8a71038f3 100644 --- a/kernel/Documentation/devicetree/bindings/input/elants_i2c.txt +++ b/kernel/Documentation/devicetree/bindings/input/elants_i2c.txt @@ -13,6 +13,9 @@ Optional properties: - pinctrl-names: should be "default" (see pinctrl binding [1]). - pinctrl-0: a phandle pointing to the pin settings for the device (see pinctrl binding [1]). +- reset-gpios: reset gpio the chip is connected to. +- vcc33-supply: a phandle for the regulator supplying 3.3V power. +- vccio-supply: a phandle for the regulator supplying IO power. [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt diff --git a/kernel/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/kernel/Documentation/devicetree/bindings/input/gpio-keys-polled.txt index 313abefa3..95d0fb11a 100644 --- a/kernel/Documentation/devicetree/bindings/input/gpio-keys-polled.txt +++ b/kernel/Documentation/devicetree/bindings/input/gpio-keys-polled.txt @@ -13,14 +13,22 @@ Subnode properties: - gpios: OF device-tree gpio specification. - label: Descriptive name of the key. - - linux,code: Keycode to emit. + - linux,code: Key / Axis code to emit. Optional subnode-properties: - linux,input-type: Specify event type this button/key generates. If not specified defaults to <1> == EV_KEY. + - linux,input-value: If linux,input-type is EV_ABS or EV_REL then this + value is sent for events this button generates when pressed. + EV_ABS/EV_REL axis will generate an event with a value of 0 when + all buttons with linux,input-type == type and linux,code == axis + are released. This value is interpreted as a signed 32 bit value, + e.g. to make a button generate a value of -1 use: + linux,input-value = <0xffffffff>; /* -1 */ - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - - gpio-key,wakeup: Boolean, button can wake-up the system. + - wakeup-source: Boolean, button can wake-up the system. + (Legacy property supported: "gpio-key,wakeup") Example nodes: diff --git a/kernel/Documentation/devicetree/bindings/input/gpio-keys.txt b/kernel/Documentation/devicetree/bindings/input/gpio-keys.txt index 44b705767..cf1333d1d 100644 --- a/kernel/Documentation/devicetree/bindings/input/gpio-keys.txt +++ b/kernel/Documentation/devicetree/bindings/input/gpio-keys.txt @@ -23,7 +23,8 @@ Optional subnode-properties: If not specified defaults to <1> == EV_KEY. - debounce-interval: Debouncing interval time in milliseconds. If not specified defaults to 5. - - gpio-key,wakeup: Boolean, button can wake-up the system. + - wakeup-source: Boolean, button can wake-up the system. + (Legacy property supported: "gpio-key,wakeup") - linux,can-disable: Boolean, indicates that button is connected to dedicated (not shared) interrupt which can be disabled to suppress events from the button. diff --git a/kernel/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt b/kernel/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt index ead641c65..d0ea09ba2 100644 --- a/kernel/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt +++ b/kernel/Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt @@ -19,7 +19,8 @@ Required Properties: Optional Properties: - linux,no-autorepeat: do no enable autorepeat feature. -- linux,wakeup: use any event on keypad as wakeup event. +- wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,wakeup") - debounce-delay-ms: debounce interval in milliseconds - col-scan-delay-us: delay, measured in microseconds, that is needed before we can scan keypad after activating column gpio diff --git a/kernel/Documentation/devicetree/bindings/hid/hid-over-i2c.txt b/kernel/Documentation/devicetree/bindings/input/hid-over-i2c.txt index 488edcb26..488edcb26 100644 --- a/kernel/Documentation/devicetree/bindings/hid/hid-over-i2c.txt +++ b/kernel/Documentation/devicetree/bindings/input/hid-over-i2c.txt diff --git a/kernel/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/kernel/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt index 0382b8bd6..1faa7292e 100644 --- a/kernel/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt +++ b/kernel/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt @@ -29,7 +29,8 @@ matrix-keyboard bindings: - nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing - nvidia,repeat-delay-ms: delay in milliseconds before repeat starts - nvidia,ghost-filter: enable ghost filtering for this device -- nvidia,wakeup-source: configure keyboard as a wakeup source for suspend/resume +- wakeup-source: configure keyboard as a wakeup source for suspend/resume + (Legacy property supported: "nvidia,wakeup-source") Example: diff --git a/kernel/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt b/kernel/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt index 7d8cb9283..4a9dc6ba9 100644 --- a/kernel/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt +++ b/kernel/Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt @@ -33,10 +33,11 @@ PROPERTIES Value type: <bool> Definition: don't enable autorepeat feature. -- linux,keypad-wakeup: +- wakeup-source: Usage: optional Value type: <bool> Definition: use any event on keypad as wakeup event. + (Legacy property supported: "linux,keypad-wakeup") - keypad,num-rows: Usage: required diff --git a/kernel/Documentation/devicetree/bindings/input/rotary-encoder.txt b/kernel/Documentation/devicetree/bindings/input/rotary-encoder.txt index 331549593..de99cbbbf 100644 --- a/kernel/Documentation/devicetree/bindings/input/rotary-encoder.txt +++ b/kernel/Documentation/devicetree/bindings/input/rotary-encoder.txt @@ -14,7 +14,17 @@ Optional properties: device, hence no steps need to be passed. - rotary-encoder,rollover: Automatic rollove when the rotary value becomes greater than the specified steps or smaller than 0. For absolute axis only. +- rotary-encoder,steps-per-period: Number of steps (stable states) per period. + The values have the following meaning: + 1: Full-period mode (default) + 2: Half-period mode + 4: Quarter-period mode +- wakeup-source: Boolean, rotary encoder can wake up the system. + +Deprecated properties: - rotary-encoder,half-period: Makes the driver work on half-period mode. + This property is deprecated. Instead, a 'steps-per-period ' value should + be used, such as "rotary-encoder,steps-per-period = <2>". See Documentation/input/rotary-encoder.txt for more information. diff --git a/kernel/Documentation/devicetree/bindings/input/samsung-keypad.txt b/kernel/Documentation/devicetree/bindings/input/samsung-keypad.txt index 942d071ba..5305e74e5 100644 --- a/kernel/Documentation/devicetree/bindings/input/samsung-keypad.txt +++ b/kernel/Documentation/devicetree/bindings/input/samsung-keypad.txt @@ -36,9 +36,12 @@ Required Board Specific Properties: - pinctrl-0: Should specify pin control groups used for this controller. - pinctrl-names: Should contain only one value - "default". +Optional Properties: +- wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,input-wakeup") + Optional Properties specific to linux: - linux,keypad-no-autorepeat: do no enable autorepeat feature. -- linux,keypad-wakeup: use any event on keypad as wakeup event. Example: @@ -49,7 +52,7 @@ Example: samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; linux,input-no-autorepeat; - linux,input-wakeup; + wakeup-source; pinctrl-names = "default"; pinctrl-0 = <&keypad_rows &keypad_columns>; diff --git a/kernel/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/kernel/Documentation/devicetree/bindings/input/snvs-pwrkey.txt new file mode 100644 index 000000000..70c142503 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/input/snvs-pwrkey.txt @@ -0,0 +1 @@ +See Documentation/devicetree/bindings/crypto/fsl-sec4.txt diff --git a/kernel/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/kernel/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt index b9c32f6fd..4357e498e 100644 --- a/kernel/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +++ b/kernel/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -12,7 +12,7 @@ Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys": Required subnode-properties: - label: Descriptive name of the key. - linux,code: Keycode to emit. - - channel: Channel this key is attached to, mut be 0 or 1. + - channel: Channel this key is attached to, must be 0 or 1. - voltage: Voltage in µV at lradc input when this key is pressed. Example: diff --git a/kernel/Documentation/devicetree/bindings/input/ti,drv2665.txt b/kernel/Documentation/devicetree/bindings/input/ti,drv2665.txt new file mode 100644 index 000000000..1ba97ac04 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/input/ti,drv2665.txt @@ -0,0 +1,17 @@ +* Texas Instruments - drv2665 Haptics driver + +Required properties: + - compatible - "ti,drv2665" - DRV2665 + - reg - I2C slave address + - vbat-supply - Required supply regulator + +Example: + +haptics: haptics@59 { + compatible = "ti,drv2665"; + reg = <0x59>; + vbat-supply = <&vbat>; +}; + +For more product information please see the link below: +http://www.ti.com/product/drv2665 diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt new file mode 100644 index 000000000..9d9e930f3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt @@ -0,0 +1,36 @@ +* Toradex Colibri VF50 Touchscreen driver + +Required Properties: +- compatible must be toradex,vf50-touchscreen +- io-channels: adc channels being used by the Colibri VF50 module +- xp-gpios: FET gate driver for input of X+ +- xm-gpios: FET gate driver for input of X- +- yp-gpios: FET gate driver for input of Y+ +- ym-gpios: FET gate driver for input of Y- +- interrupt-parent: phandle for the interrupt controller +- interrupts: pen irq interrupt for touch detection +- pinctrl-names: "idle", "default", "gpios" +- pinctrl-0: pinctrl node for pen/touch detection state pinmux +- pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux +- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers +- vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values + +Example: + + touchctrl: vf50_touchctrl { + compatible = "toradex,vf50-touchscreen"; + io-channels = <&adc1 0>,<&adc0 0>, + <&adc0 1>,<&adc1 2>; + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "idle","default","gpios"; + pinctrl-0 = <&pinctrl_touchctrl_idle>; + pinctrl-1 = <&pinctrl_touchctrl_default>; + pinctrl-2 = <&pinctrl_touchctrl_gpios>; + vf50-ts-min-pressure = <200>; + status = "disabled"; + }; diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt index 76db96704..f99528da1 100644 --- a/kernel/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt +++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -5,6 +5,7 @@ There are 3 variants of the chip for various touch panel sizes FT5206GE1 2.8" .. 3.8" FT5306DE4 4.3" .. 7" FT5406EE8 7" .. 8.9" +FT5506EEG 7" .. 8.9" The software interface is identical for all those chips, so that currently there is no need for the driver to distinguish between the @@ -17,6 +18,7 @@ Required properties: - compatible: "edt,edt-ft5206" or: "edt,edt-ft5306" or: "edt,edt-ft5406" + or: "edt,edt-ft5506" - reg: I2C slave address of the chip (0x38) - interrupt-parent: a phandle pointing to the interrupt controller @@ -49,7 +51,7 @@ Example: pinctrl-names = "default"; pinctrl-0 = <&edt_ft5x06_pins>; interrupt-parent = <&gpio2>; - interrupts = <5 0>; - reset-gpios = <&gpio2 6 1>; - wake-gpios = <&gpio4 9 0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; }; diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt new file mode 100644 index 000000000..777521da3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt @@ -0,0 +1,35 @@ +* FocalTech FT6236 I2C touchscreen controller + +Required properties: + - compatible : "focaltech,ft6236" + - reg : I2C slave address of the chip (0x38) + - interrupt-parent : a phandle pointing to the interrupt controller + serving the interrupt for this chip + - interrupts : interrupt specification for the touch controller + interrupt + - reset-gpios : GPIO specification for the RSTN input + - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) + - touchscreen-size-y : vertical resolution of touchscreen (in pixels) + +Optional properties: + - touchscreen-fuzz-x : horizontal noise value of the absolute input + device (in pixels) + - touchscreen-fuzz-y : vertical noise value of the absolute input + device (in pixels) + - touchscreen-inverted-x : X axis is inverted (boolean) + - touchscreen-inverted-y : Y axis is inverted (boolean) + - touchscreen-swapped-x-y: X and Y axis are swapped (boolean) + Swapping is done after inverting the axis + +Example: + + ft6x06@38 { + compatible = "focaltech,ft6236"; + reg = <0x38>; + interrupt-parent = <&gpio>; + interrupts = <23 2>; + touchscreen-size-x = <320>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt new file mode 100644 index 000000000..853dff96d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -0,0 +1,36 @@ +* Freescale i.MX6UL Touch Controller + +Required properties: +- compatible: must be "fsl,imx6ul-tsc". +- reg: this touch controller address and the ADC2 address. +- interrupts: the interrupt of this touch controller and ADC2. +- clocks: the root clock of touch controller and ADC2. +- clock-names; must be "tsc" and "adc". +- xnur-gpio: the X- gpio this controller connect to. + This xnur-gpio returns to low once the finger leave the touch screen (The + last touch event the touch controller capture). + +Optional properties: +- measure-delay-time: the value of measure delay time. + Before X-axis or Y-axis measurement, the screen need some time before + even potential distribution ready. + This value depends on the touch screen. +- pre-charge-time: the touch screen need some time to precharge. + This value depends on the touch screen. + +Example: + tsc: tsc@02040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xfff>; + pre-charge-time = <0xffff>; + status = "okay"; + }; diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt index 6e551090f..8eb240a28 100644 --- a/kernel/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt +++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt @@ -8,6 +8,9 @@ Required properties: - touchscreen-size-x: horizontal resolution of touchscreen (in pixels) - touchscreen-size-y: vertical resolution of touchscreen (in pixels) +Optional properties: +- reset-gpio: GPIO connected to the RESET line of the chip + Example: i2c@00000000 { diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt index 6c4fb3482..b1163bf97 100644 --- a/kernel/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt +++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt @@ -42,6 +42,27 @@ Optional properties: hardware knob for adjusting the amount of "settling time". +- child "adc" + ti,chan-step-opendelay: List of open delays for each channel of + ADC in the order of ti,adc-channels. The + value corresponds to the number of ADC + clock cycles to wait after applying the + step configuration registers and before + sending the start of ADC conversion. + Maximum value is 0x3FFFF. + ti,chan-step-sampledelay: List of sample delays for each channel + of ADC in the order of ti,adc-channels. + The value corresponds to the number of + ADC clock cycles to sample (to hold + start of conversion high). + Maximum value is 0xFF. + ti,chan-step-avg: Number of averages to be performed for each + channel of ADC. If average is 16 then input + is sampled 16 times and averaged to get more + accurate value. This increases the time taken + by ADC to generate a sample. Valid range is 0 + average to 16 averages. Maximum value is 16. + Example: tscadc: tscadc@44e0d000 { compatible = "ti,am3359-tscadc"; @@ -55,5 +76,8 @@ Example: adc { ti,adc-channels = <4 5 6 7>; + ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>; + ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>; + ti,chan-step-avg = <16 2 4 8>; }; } diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt index 09089a6d6..b80c04b0e 100644 --- a/kernel/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt +++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt @@ -1,14 +1,15 @@ -* Texas Instruments tsc2005 touchscreen controller +* Texas Instruments tsc2004 and tsc2005 touchscreen controllers Required properties: - - compatible : "ti,tsc2005" - - reg : SPI device address - - spi-max-frequency : Maximal SPI speed + - compatible : "ti,tsc2004" or "ti,tsc2005" + - reg : Device address - interrupts : IRQ specifier - - reset-gpios : GPIO specifier - - vio-supply : Regulator specifier + - spi-max-frequency : Maximum SPI clocking speed of the device + (for tsc2005) Optional properties: + - vio-supply : Regulator specifier + - reset-gpios : GPIO specifier for the controller reset line - ti,x-plate-ohms : integer, resistance of the touchscreen's X plates in ohm (defaults to 280) - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after @@ -18,6 +19,27 @@ Optional properties: Example: +&i2c3 { + tsc2004@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + vio-supply = <&vio>; + + reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>; + + touchscreen-fuzz-x = <4>; + touchscreen-fuzz-y = <7>; + touchscreen-fuzz-pressure = <2>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-max-pressure = <2048>; + + ti,x-plate-ohms = <280>; + ti,esd-recovery-timeout-ms = <8000>; + }; +} + &mcspi1 { tsc2005@0 { compatible = "ti,tsc2005"; diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt index 80c37df94..e3c27c4fd 100644 --- a/kernel/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt +++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt @@ -4,12 +4,12 @@ Required properties: - compatible: must be "neonode,zforce" - reg: I2C address of the chip - interrupts: interrupt to which the chip is connected -- gpios: gpios the chip is connected to - first one is the interrupt gpio and second one the reset gpio +- reset-gpios: reset gpio the chip is connected to - x-size: horizontal resolution of touchscreen - y-size: vertical resolution of touchscreen Optional properties: +- irq-gpios : interrupt gpio the chip is connected to - vdd-supply: Regulator controlling the controller supply Example: @@ -23,8 +23,8 @@ Example: interrupts = <2 0>; vdd-supply = <®_zforce_vdd>; - gpios = <&gpio5 6 0>, /* INT */ - <&gpio5 9 0>; /* RST */ + reset-gpios = <&gpio5 9 0>; /* RST */ + irq-gpios = <&gpio5 6 0>; /* IRQ, optional */ x-size = <800>; y-size = <600>; diff --git a/kernel/Documentation/devicetree/bindings/arm/gic-v3.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index ddfade40a..7803e77d8 100644 --- a/kernel/Documentation/devicetree/bindings/arm/gic-v3.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -57,6 +57,8 @@ used to route Message Signalled Interrupts (MSI) to the CPUs. These nodes must have the following properties: - compatible : Should at least contain "arm,gic-v3-its". - msi-controller : Boolean property. Identifies the node as an MSI controller +- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device + which will generate the MSI. - reg: Specifies the base physical address and size of the ITS registers. @@ -83,6 +85,7 @@ Examples: gic-its@2c200000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x2c200000 0 0x200000>; }; }; @@ -107,12 +110,14 @@ Examples: gic-its@2c200000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x2c200000 0 0x200000>; }; gic-its@2c400000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0x2c400000 0 0x200000>; }; }; diff --git a/kernel/Documentation/devicetree/bindings/arm/gic.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt index 2da059a47..cc56021eb 100644 --- a/kernel/Documentation/devicetree/bindings/arm/gic.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt @@ -11,13 +11,14 @@ have PPIs or SGIs. Main node required properties: - compatible : should be one of: - "arm,gic-400" + "arm,arm1176jzf-devchip-gic" + "arm,arm11mp-gic" "arm,cortex-a15-gic" - "arm,cortex-a9-gic" "arm,cortex-a7-gic" - "arm,arm11mp-gic" + "arm,cortex-a9-gic" + "arm,gic-400" + "arm,pl390" "brcm,brahma-b15-gic" - "arm,arm1176jzf-devchip-gic" "qcom,msm-8660-qgic" "qcom,msm-qgic2" - interrupt-controller : Identifies the node as an interrupt controller @@ -58,6 +59,21 @@ Optional regions, used when the GIC doesn't have banked registers. The offset is cpu-offset * cpu-nr. +- clocks : List of phandle and clock-specific pairs, one for each entry + in clock-names. +- clock-names : List of names for the GIC clock input(s). Valid clock names + depend on the GIC variant: + "ic_clk" (for "arm,arm11mp-gic") + "PERIPHCLKEN" (for "arm,cortex-a15-gic") + "PERIPHCLK", "PERIPHCLKEN" (for "arm,cortex-a9-gic") + "clk" (for "arm,gic-400") + "gclk" (for "arm,pl390") + +- power-domains : A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle, used when the GIC + is part of a Power or Clock Domain. + + Example: intc: interrupt-controller@fff11000 { diff --git a/kernel/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt index c9cf605bb..c9cf605bb 100644 --- a/kernel/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt diff --git a/kernel/Documentation/devicetree/bindings/arm/vic.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt index dd527216c..dd527216c 100644 --- a/kernel/Documentation/devicetree/bindings/arm/vic.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt index f292917fa..0e9f09a6a 100644 --- a/kernel/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt @@ -2,7 +2,7 @@ Required properties: - compatible: Should be "atmel,<chip>-aic" - <chip> can be "at91rm9200", "sama5d3" or "sama5d4" + <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4" - interrupt-controller: Identifies the node as an interrupt controller. - interrupt-parent: For single AIC system, it is an empty property. - #interrupt-cells: The number of cells to define the interrupts. It should be 3. diff --git a/kernel/Documentation/devicetree/bindings/cris/interrupts.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/axis,crisv32-intc.txt index e8b123b0a..e8b123b0a 100644 --- a/kernel/Documentation/devicetree/bindings/cris/interrupts.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/axis,crisv32-intc.txt diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt index 7da578d72..2d6c8bb4d 100644 --- a/kernel/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -5,9 +5,14 @@ The BCM2835 contains a custom top-level interrupt controller, which supports controller, or the HW block containing it, is referred to occasionally as "armctrl" in the SoC documentation, hence naming of this binding. +The BCM2836 contains the same interrupt controller with the same +interrupts, but the per-CPU interrupt controller is the root, and an +interrupt there indicates that the ARMCTRL has an interrupt to handle. + Required properties: -- compatible : should be "brcm,bcm2835-armctrl-ic" +- compatible : should be "brcm,bcm2835-armctrl-ic" or + "brcm,bcm2836-armctrl-ic" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an @@ -20,6 +25,12 @@ Required properties: The 2nd cell contains the interrupt number within the bank. Valid values are 0..7 for bank 0, and 0..31 for bank 1. +Additional required properties for brcm,bcm2836-armctrl-ic: +- interrupt-parent : Specifies the parent interrupt controller when this + controller is the second level. +- interrupts : Specifies the interrupt on the parent for this interrupt + controller to handle. + The interrupt sources are as follows: Bank 0: @@ -102,9 +113,21 @@ Bank 2: Example: +/* BCM2835, first level */ intc: interrupt-controller { compatible = "brcm,bcm2835-armctrl-ic"; reg = <0x7e00b200 0x200>; interrupt-controller; #interrupt-cells = <2>; }; + +/* BCM2836, second level */ +intc: interrupt-controller { + compatible = "brcm,bcm2836-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&local_intc>; + interrupts = <8>; +}; diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt new file mode 100644 index 000000000..f320dcd6e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.txt @@ -0,0 +1,37 @@ +BCM2836 per-CPU interrupt controller + +The BCM2836 has a per-cpu interrupt controller for the timer, PMU +events, and SMP IPIs. One of the CPUs may receive interrupts for the +peripheral (GPU) events, which chain to the BCM2835-style interrupt +controller. + +Required properties: + +- compatible: Should be "brcm,bcm2836-l1-intc" +- reg: Specifies base physical address and size of the + registers +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt source. The value shall be 1 + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +The interrupt sources are as follows: + +0: CNTPSIRQ +1: CNTPNSIRQ +2: CNTHPIRQ +3: CNTVIRQ +8: GPU_FAST +9: PMU_FAST + +Example: + +local_intc: local_intc { + compatible = "brcm,bcm2836-l1-intc"; + reg = <0x40000000 0x100>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&local_intc>; +}; diff --git a/kernel/Documentation/devicetree/bindings/metag/meta-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt index 80994adab..80994adab 100644 --- a/kernel/Documentation/devicetree/bindings/metag/meta-intc.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/img,meta-intc.txt diff --git a/kernel/Documentation/devicetree/bindings/metag/pdc-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt index a69118550..a69118550 100644 --- a/kernel/Documentation/devicetree/bindings/metag/pdc-intc.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/img,pdc-intc.txt diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt new file mode 100644 index 000000000..5f89fb635 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.txt @@ -0,0 +1,28 @@ +Ingenic SoC Interrupt Controller + +Required properties: + +- compatible : should be "ingenic,<socname>-intc". Valid strings are: + ingenic,jz4740-intc + ingenic,jz4770-intc + ingenic,jz4775-intc + ingenic,jz4780-intc +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. +- interrupt-parent : phandle of the CPU interrupt controller. +- interrupts : Specifies the CPU interrupt the controller is connected to. + +Example: + +intc: interrupt-controller@10001000 { + compatible = "ingenic,jz4740-intc"; + reg = <0x10001000 0x14>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; +}; diff --git a/kernel/Documentation/devicetree/bindings/x86/interrupt.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt index 7d19f494f..7d19f494f 100644 --- a/kernel/Documentation/devicetree/bindings/x86/interrupt.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt diff --git a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt index 4f5a5352c..afef6a85a 100644 --- a/kernel/Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt @@ -1,4 +1,4 @@ -Mediatek 65xx/81xx sysirq ++Mediatek 65xx/67xx/81xx sysirq Mediatek SOCs sysirq support controllable irq inverter for each GIC SPI interrupt. @@ -8,9 +8,11 @@ Required properties: "mediatek,mt8173-sysirq" "mediatek,mt8135-sysirq" "mediatek,mt8127-sysirq" + "mediatek,mt6795-sysirq" "mediatek,mt6592-sysirq" "mediatek,mt6589-sysirq" "mediatek,mt6582-sysirq" + "mediatek,mt6580-sysirq" "mediatek,mt6577-sysirq" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Use the same format as specified by GIC in diff --git a/kernel/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt index 8b53273cb..8b53273cb 100644 --- a/kernel/Documentation/devicetree/bindings/arm/mrvl/intc.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/msi.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/msi.txt new file mode 100644 index 000000000..c60c034dc --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/msi.txt @@ -0,0 +1,135 @@ +This document describes the generic device tree binding for MSI controllers and +their master(s). + +Message Signaled Interrupts (MSIs) are a class of interrupts generated by a +write to an MMIO address. + +MSIs were originally specified by PCI (and are used with PCIe), but may also be +used with other busses, and hence a mechanism is required to relate devices on +those busses to the MSI controllers which they are capable of using, +potentially including additional information. + +MSIs are distinguished by some combination of: + +- The doorbell (the MMIO address written to). + + Devices may be configured by software to write to arbitrary doorbells which + they can address. An MSI controller may feature a number of doorbells. + +- The payload (the value written to the doorbell). + + Devices may be configured to write an arbitrary payload chosen by software. + MSI controllers may have restrictions on permitted payloads. + +- Sideband information accompanying the write. + + Typically this is neither configurable nor probeable, and depends on the path + taken through the memory system (i.e. it is a property of the combination of + MSI controller and device rather than a property of either in isolation). + + +MSI controllers: +================ + +An MSI controller signals interrupts to a CPU when a write is made to an MMIO +address by some master. An MSI controller may feature a number of doorbells. + +Required properties: +-------------------- + +- msi-controller: Identifies the node as an MSI controller. + +Optional properties: +-------------------- + +- #msi-cells: The number of cells in an msi-specifier, required if not zero. + + Typically this will encode information related to sideband data, and will + not encode doorbells or payloads as these can be configured dynamically. + + The meaning of the msi-specifier is defined by the device tree binding of + the specific MSI controller. + + +MSI clients +=========== + +MSI clients are devices which generate MSIs. For each MSI they wish to +generate, the doorbell and payload may be configured, though sideband +information may not be configurable. + +Required properties: +-------------------- + +- msi-parent: A list of phandle + msi-specifier pairs, one for each MSI + controller which the device is capable of using. + + This property is unordered, and MSIs may be allocated from any combination of + MSI controllers listed in the msi-parent property. + + If a device has restrictions on the allocation of MSIs, these restrictions + must be described with additional properties. + + When #msi-cells is non-zero, busses with an msi-parent will require + additional properties to describe the relationship between devices on the bus + and the set of MSIs they can potentially generate. + + +Example +======= + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi_a: msi-controller@a { + reg = <0xa 0xf00>; + compatible = "vendor-a,some-controller"; + msi-controller; + /* No sideband data, so #msi-cells omitted */ + }; + + msi_b: msi-controller@b { + reg = <0xb 0xf00>; + compatible = "vendor-b,another-controller"; + msi-controller; + /* Each device has some unique ID */ + #msi-cells = <1>; + }; + + msi_c: msi-controller@c { + reg = <0xb 0xf00>; + compatible = "vendor-b,another-controller"; + msi-controller; + /* Each device has some unique ID */ + #msi-cells = <1>; + }; + + dev@0 { + reg = <0x0 0xf00>; + compatible = "vendor-c,some-device"; + + /* Can only generate MSIs to msi_a */ + msi-parent = <&msi_a>; + }; + + dev@1 { + reg = <0x1 0xf00>; + compatible = "vendor-c,some-device"; + + /* + * Can generate MSIs to either A or B. + */ + msi-parent = <&msi_a>, <&msi_b 0x17>; + }; + + dev@2 { + reg = <0x2 0xf00>; + compatible = "vendor-c,some-device"; + /* + * Has different IDs at each MSI controller. + * Can generate MSIs to all of the MSI controllers. + */ + msi-parent = <&msi_a>, <&msi_b 0x17>, <&msi_c 0x53>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt index 539adca19..539adca19 100644 --- a/kernel/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/nxp,lpc3220-mic.txt diff --git a/kernel/Documentation/devicetree/bindings/open-pic.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt index 909a902df..909a902df 100644 --- a/kernel/Documentation/devicetree/bindings/open-pic.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt new file mode 100644 index 000000000..aabce7810 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-cpu-intc.txt @@ -0,0 +1,44 @@ +Binding for Qualcomm Atheros AR7xxx/AR9XXX CPU interrupt controller + +On most SoC the IRQ controller need to flush the DDR FIFO before running +the interrupt handler of some devices. This is configured using the +qca,ddr-wb-channels and qca,ddr-wb-channel-interrupts properties. + +Required Properties: + +- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-cpu-intc" + as fallback +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source, should be 1 for intc + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Optional Properties: + +- qca,ddr-wb-channel-interrupts: List of the interrupts needing a write + buffer flush +- qca,ddr-wb-channels: List of phandles to the write buffer channels for + each interrupt. If qca,ddr-wb-channel-interrupts is not present the interrupt + default to the entry's index. + +Example: + + interrupt-controller { + compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc"; + + interrupt-controller; + #interrupt-cells = <1>; + + qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; + qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, + <&ddr_ctrl 0>, <&ddr_ctrl 1>; + }; + + ... + + ddr_ctrl: memory-controller@18000000 { + ... + #qca,ddr-wb-channel-cells = <1>; + }; diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt new file mode 100644 index 000000000..ec96b1f01 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt @@ -0,0 +1,46 @@ +Binding for Qualcomm Atheros AR7xxx/AR9XXX MISC interrupt controller + +The MISC interrupt controller is a secondary controller for lower priority +interrupt. + +Required Properties: +- compatible: has to be "qca,<soctype>-cpu-intc", "qca,ar7100-misc-intc" or + "qca,<soctype>-cpu-intc", "qca,ar7240-misc-intc" +- reg: Base address and size of the controllers memory area +- interrupt-parent: phandle of the parent interrupt controller. +- interrupts: Interrupt specifier for the controllers interrupt. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode interrupt + source, should be 1 + +Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x, +use ar7240 for all other SoCs. + +Please refer to interrupts.txt in this directory for details of the common +Interrupt Controllers bindings used by client devices. + +Example: + + interrupt-controller@18060010 { + compatible = "qca,ar9132-misc-intc", qca,ar7100-misc-intc"; + reg = <0x18060010 0x4>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + +Another example: + + interrupt-controller@18060010 { + compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc"; + reg = <0x18060010 0x4>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt new file mode 100644 index 000000000..56e8d82af --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt @@ -0,0 +1,22 @@ +* H8/300H Interrupt controller + +Required properties: + +- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback. +- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in + interrupts.txt in this directory +- regs: Base address of interrupt controller registers. + +Optional properties: + +- any properties, listed in interrupts.txt, and any standard resource allocation + properties + +Example: + + h8intc: interrupt-controller@fee012 { + compatible = "renesas,h8300h-intc", "renesas,h8300-intc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xfee012 7>; + }; diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt new file mode 100644 index 000000000..faded2b15 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt @@ -0,0 +1,22 @@ +* H8S Interrupt controller + +Required properties: + +- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback. +- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in + interrupts.txt in this directory +- regs: Base address of interrupt controller registers. + +Optional properties: + +- any properties, listed in interrupts.txt, and any standard resource allocation + properties + +Example: + + h8intc: interrupt-controller@fffe00 { + compatible = "renesas,h8s-intc", "renesas,h8300-intc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xfffe00 24>; + }; diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt index 4f7946ae8..772c550d3 100644 --- a/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,intc-irqpin.txt @@ -13,9 +13,12 @@ Required properties: - reg: Base address and length of each register bank used by the external IRQ pins driven by the interrupt controller hardware module. The base addresses, length and number of required register banks varies with soctype. - +- interrupt-controller: Identifies the node as an interrupt controller. - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in - interrupts.txt in this directory + interrupts.txt in this directory. +- interrupts: Must contain a list of interrupt specifiers. For each interrupt + provided by this irqpin controller instance, there must be one entry, + referring to the corresponding parent interrupt. Optional properties: @@ -25,3 +28,35 @@ Optional properties: if different from the default 4 bits - control-parent: disable and enable interrupts on the parent interrupt controller, needed for some broken implementations +- clocks: Must contain a reference to the functional clock. This property is + mandatory if the hardware implements a controllable functional clock for + the irqpin controller instance. +- power-domains: Must contain a reference to the power domain. This property is + mandatory if the irqpin controller instance is part of a controllable power + domain. + + +Example +------- + + irqpin1: interrupt-controller@e6900004 { + compatible = "renesas,intc-irqpin-r8a7740", + "renesas,intc-irqpin"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0xe6900004 4>, + <0xe6900014 4>, + <0xe6900024 1>, + <0xe6900044 1>, + <0xe6900064 1>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7740_CLK_INTCA>; + power-domains = <&pd_a4s>; + }; diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt index 63633bdea..ae5054c27 100644 --- a/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt @@ -10,6 +10,7 @@ Required properties: - "renesas,irqc-r8a7792" (R-Car V2H) - "renesas,irqc-r8a7793" (R-Car M2-N) - "renesas,irqc-r8a7794" (R-Car E2) + - "renesas,intc-ex-r8a7795" (R-Car H3) - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in interrupts.txt in this directory - clocks: Must contain a reference to the functional clock. diff --git a/kernel/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt index 9e5f73412..9e5f73412 100644 --- a/kernel/Documentation/devicetree/bindings/arm/samsung/interrupt-combiner.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.txt diff --git a/kernel/Documentation/devicetree/bindings/arc/interrupts.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt index 9a5d56243..9a5d56243 100644 --- a/kernel/Documentation/devicetree/bindings/arc/interrupts.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,arc700-intc.txt diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt new file mode 100644 index 000000000..0dcb7c7d3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt @@ -0,0 +1,46 @@ +* ARC-HS Interrupt Distribution Unit + + This optional 2nd level interrupt controller can be used in SMP configurations for + dynamic IRQ routing, load balancing of common/external IRQs towards core intc. + +Properties: + +- compatible: "snps,archs-idu-intc" +- interrupt-controller: This is an interrupt controller. +- interrupt-parent: <reference to parent core intc> +- #interrupt-cells: Must be <2>. +- interrupts: <...> specifies the upstream core irqs + + First cell specifies the "common" IRQ from peripheral to IDU + Second cell specifies the irq distribution mode to cores + 0=Round Robin; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 + + intc accessed via the special ARC AUX register interface, hence "reg" property + is not specified. + +Example: + core_intc: core-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + + /* + * <hwirq distribution> + * distribution: 0=RR; 1=cpu0, 2=cpu1, 4=cpu2, 8=cpu3 + */ + #interrupt-cells = <2>; + + /* upstream core irqs: downstream these are "COMMON" irq 0,1.. */ + interrupts = <24 25 26 27 28 29 30 31>; + }; + + some_device: serial@c0fc1000 { + interrupt-parent = <&idu_intc>; + interrupts = <0 0>; /* upstream idu IRQ #24, Round Robin */ + }; diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt new file mode 100644 index 000000000..69f326d6a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,archs-intc.txt @@ -0,0 +1,22 @@ +* ARC-HS incore Interrupt Controller (Provided by cores implementing ARCv2 ISA) + +Properties: + +- compatible: "snps,archs-intc" +- interrupt-controller: This is an interrupt controller. +- #interrupt-cells: Must be <1>. + + Single Cell "interrupts" property of a device specifies the IRQ number + between 16 to 256 + + intc accessed via the special ARC AUX register interface, hence "reg" property + is not specified. + +Example: + + intc: interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <16 17 18 19 20 21 22 23 24 25>; + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/spear/shirq.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt index 715a013ed..715a013ed 100644 --- a/kernel/Documentation/devicetree/bindings/arm/spear/shirq.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/st,spear3xx-shirq.txt diff --git a/kernel/Documentation/devicetree/bindings/c6x/interrupt.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt index 42bb796cc..42bb796cc 100644 --- a/kernel/Documentation/devicetree/bindings/c6x/interrupt.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/ti,c64x+megamod-pic.txt diff --git a/kernel/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt index 597e8a089..597e8a089 100644 --- a/kernel/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt diff --git a/kernel/Documentation/devicetree/bindings/arm/omap/intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt index f2583e6ec..f2583e6ec 100644 --- a/kernel/Documentation/devicetree/bindings/arm/omap/intc.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/ti,omap2-intc.txt diff --git a/kernel/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt index 0a4ce1051..0a4ce1051 100644 --- a/kernel/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/via,vt8500-intc.txt diff --git a/kernel/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/kernel/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt new file mode 100644 index 000000000..947863acc --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt @@ -0,0 +1,59 @@ +* ARM SMMUv3 Architecture Implementation + +The SMMUv3 architecture is a significant deparature from previous +revisions, replacing the MMIO register interface with in-memory command +and event queues and adding support for the ATS and PRI components of +the PCIe specification. + +** SMMUv3 required properties: + +- compatible : Should include: + + * "arm,smmu-v3" for any SMMUv3 compliant + implementation. This entry should be last in the + compatible list. + +- reg : Base address and size of the SMMU. + +- interrupts : Non-secure interrupt list describing the wired + interrupt sources corresponding to entries in + interrupt-names. If no wired interrupts are + present then this property may be omitted. + +- interrupt-names : When the interrupts property is present, should + include the following: + * "eventq" - Event Queue not empty + * "priq" - PRI Queue not empty + * "cmdq-sync" - CMD_SYNC complete + * "gerror" - Global Error activated + +** SMMUv3 optional properties: + +- dma-coherent : Present if DMA operations made by the SMMU (page + table walks, stream table accesses etc) are cache + coherent with the CPU. + + NOTE: this only applies to the SMMU itself, not + masters connected upstream of the SMMU. + +- msi-parent : See the generic MSI binding described in + devicetree/bindings/interrupt-controller/msi.txt + for a description of the msi-parent property. + +- hisilicon,broken-prefetch-cmd + : Avoid sending CMD_PREFETCH_* commands to the SMMU. + +** Example + + smmu@2b400000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x2b400000 0x0 0x20000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "priq", "cmdq-sync", "gerror"; + dma-coherent; + #iommu-cells = <0>; + msi-parent = <&its 0xff0000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/kernel/Documentation/devicetree/bindings/iommu/arm,smmu.txt index 06760503a..718074501 100644 --- a/kernel/Documentation/devicetree/bindings/iommu/arm,smmu.txt +++ b/kernel/Documentation/devicetree/bindings/iommu/arm,smmu.txt @@ -43,6 +43,12 @@ conditions. ** System MMU optional properties: +- dma-coherent : Present if page table walks made by the SMMU are + cache coherent with the CPU. + + NOTE: this only applies to the SMMU itself, not + masters connected upstream of the SMMU. + - calxeda,smmu-secure-config-access : Enable proper handling of buggy implementations that always use secure access to SMMU configuration registers. In this case non-secure diff --git a/kernel/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/kernel/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt index 729543c47..bc620fe32 100644 --- a/kernel/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt +++ b/kernel/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt @@ -47,7 +47,7 @@ Required properties: - clocks: Required if the System MMU is needed to gate its clock. - power-domains: Required if the System MMU is needed to gate its power. Please refer to the following document: - Documentation/devicetree/bindings/arm/exynos/power_domain.txt + Documentation/devicetree/bindings/power/pd-samsung.txt Examples: gsc_0: gsc@13e00000 { diff --git a/kernel/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt b/kernel/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt index 42531dc38..4bd10dd88 100644 --- a/kernel/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt +++ b/kernel/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt @@ -4,23 +4,56 @@ Required properties: - compatible : Should be one of, "ti,omap2-iommu" for OMAP2/OMAP3 IOMMU instances "ti,omap4-iommu" for OMAP4/OMAP5 IOMMU instances + "ti,dra7-dsp-iommu" for DRA7xx DSP IOMMU instances "ti,dra7-iommu" for DRA7xx IOMMU instances - ti,hwmods : Name of the hwmod associated with the IOMMU instance - reg : Address space for the configuration registers - interrupts : Interrupt specifier for the IOMMU instance +- #iommu-cells : Should be 0. OMAP IOMMUs are all "single-master" devices, + and needs no additional data in the pargs specifier. Please + also refer to the generic bindings document for more info + on this property, + Documentation/devicetree/bindings/iommu/iommu.txt Optional properties: - ti,#tlb-entries : Number of entries in the translation look-aside buffer. Should be either 8 or 32 (default: 32) - ti,iommu-bus-err-back : Indicates the IOMMU instance supports throwing back a bus error response on MMU faults. +- ti,syscon-mmuconfig : Should be a pair of the phandle to the DSP_SYSTEM + syscon node that contains the additional control + register for enabling the MMU, and the MMU instance + number (0-indexed) within the sub-system. This property + is required for DSP IOMMU instances on DRA7xx SoCs. The + instance number should be 0 for DSP MDMA MMUs and 1 for + DSP EDMA MMUs. Example: /* OMAP3 ISP MMU */ mmu_isp: mmu@480bd400 { + #iommu-cells = <0>; compatible = "ti,omap2-iommu"; reg = <0x480bd400 0x80>; interrupts = <24>; ti,hwmods = "mmu_isp"; ti,#tlb-entries = <8>; }; + + /* DRA74x DSP2 MMUs */ + mmu0_dsp2: mmu@41501000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41501000 0x100>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu0_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x0>; + }; + + mmu1_dsp2: mmu@41502000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41502000 0x100>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu1_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x1>; + }; diff --git a/kernel/Documentation/devicetree/bindings/ipmi.txt b/kernel/Documentation/devicetree/bindings/ipmi.txt new file mode 100644 index 000000000..d5f1a877e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/ipmi.txt @@ -0,0 +1,25 @@ +IPMI device + +Required properties: +- compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt +- device_type: should be ipmi +- reg: Address and length of the register set for the device + +Optional properties: +- interrupts: The interrupt for the device. Without this the interface + is polled. +- reg-size - The size of the register. Defaults to 1 +- reg-spacing - The number of bytes between register starts. Defaults to 1 +- reg-shift - The amount to shift the registers to the right to get the data + into bit zero. + +Example: + +smic@fff3a000 { + compatible = "ipmi-smic"; + device_type = "ipmi"; + reg = <0xfff3a000 0x1000>; + interrupts = <0 24 4>; + reg-size = <4>; + reg-spacing = <4>; +}; diff --git a/kernel/Documentation/devicetree/bindings/video/backlight/88pm860x.txt b/kernel/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt index 261df2799..261df2799 100644 --- a/kernel/Documentation/devicetree/bindings/video/backlight/88pm860x.txt +++ b/kernel/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt diff --git a/kernel/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt b/kernel/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt index 321be6640..321be6640 100644 --- a/kernel/Documentation/devicetree/bindings/video/backlight/gpio-backlight.txt +++ b/kernel/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.txt diff --git a/kernel/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/kernel/Documentation/devicetree/bindings/leds/backlight/lp855x.txt index 0a3ecbc3a..0a3ecbc3a 100644 --- a/kernel/Documentation/devicetree/bindings/video/backlight/lp855x.txt +++ b/kernel/Documentation/devicetree/bindings/leds/backlight/lp855x.txt diff --git a/kernel/Documentation/devicetree/bindings/video/backlight/max8925-backlight.txt b/kernel/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt index b4cffdaa4..b4cffdaa4 100644 --- a/kernel/Documentation/devicetree/bindings/video/backlight/max8925-backlight.txt +++ b/kernel/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/kernel/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt index a85a964d6..e5b294daf 100644 --- a/kernel/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt +++ b/kernel/Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt @@ -5,10 +5,9 @@ Required properties: - reg: slave address Optional properties: -- label: The label for this led - See Documentation/devicetree/bindings/leds/common.txt -- linux,default-trigger: Default trigger assigned to the LED - See Documentation/devicetree/bindings/leds/common.txt +- default-brightness: brightness value on boot, value from: 0-4095 + default: 2048 +- label: The name of the backlight device - qcom,cs-out: bool; enable current sink output - qcom,cabc: bool; enable content adaptive backlight control - qcom,ext-gen: bool; use externally generated modulator signal to dim diff --git a/kernel/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/kernel/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt index 764db86d4..764db86d4 100644 --- a/kernel/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt +++ b/kernel/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.txt diff --git a/kernel/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/kernel/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt index 8bf2940f5..8bf2940f5 100644 --- a/kernel/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt +++ b/kernel/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt diff --git a/kernel/Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt b/kernel/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt index 5fb9279ac..5fb9279ac 100644 --- a/kernel/Documentation/devicetree/bindings/video/backlight/tps65217-backlight.txt +++ b/kernel/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt diff --git a/kernel/Documentation/devicetree/bindings/leds/common.txt b/kernel/Documentation/devicetree/bindings/leds/common.txt index 747c53805..68419843e 100644 --- a/kernel/Documentation/devicetree/bindings/leds/common.txt +++ b/kernel/Documentation/devicetree/bindings/leds/common.txt @@ -29,14 +29,23 @@ Optional properties for child nodes: "ide-disk" - LED indicates disk activity "timer" - LED flashes at a fixed, configurable rate -- max-microamp : maximum intensity in microamperes of the LED - (torch LED for flash devices) -- flash-max-microamp : maximum intensity in microamperes of the - flash LED; it is mandatory if the LED should - support the flash mode -- flash-timeout-us : timeout in microseconds after which the flash - LED is turned off +- led-max-microamp : Maximum LED supply current in microamperes. This property + can be made mandatory for the board configurations + introducing a risk of hardware damage in case an excessive + current is set. + For flash LED controllers with configurable current this + property is mandatory for the LEDs in the non-flash modes + (e.g. torch or indicator). +Required properties for flash LED child nodes: +- flash-max-microamp : Maximum flash LED supply current in microamperes. +- flash-max-timeout-us : Maximum timeout in microseconds after which the flash + LED is turned off. + +For controllers that have no configurable current the flash-max-microamp +property can be omitted. +For controllers that have no configurable timeout the flash-max-timeout-us +property can be omitted. Examples: @@ -49,7 +58,7 @@ system-status { camera-flash { label = "Flash"; led-sources = <0>, <1>; - max-microamp = <50000>; + led-max-microamp = <50000>; flash-max-microamp = <320000>; - flash-timeout-us = <500000>; + flash-max-timeout-us = <500000>; }; diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/kernel/Documentation/devicetree/bindings/leds/leds-aat1290.txt new file mode 100644 index 000000000..85c0c5861 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/leds/leds-aat1290.txt @@ -0,0 +1,73 @@ +* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs + +The device is controlled through two pins: FL_EN and EN_SET. The pins when, +asserted high, enable flash strobe and movie mode (max 1/2 of flash current) +respectively. In order to add a capability of selecting the strobe signal source +(e.g. CPU or camera sensor) there is an additional switch required, independent +of the flash chip. The switch is controlled with pin control. + +Required properties: + +- compatible : Must be "skyworks,aat1290". +- flen-gpios : Must be device tree identifier of the flash device FL_EN pin. +- enset-gpios : Must be device tree identifier of the flash device EN_SET pin. + +Optional properties: +- pinctrl-names : Must contain entries: "default", "host", "isp". Entries + "default" and "host" must refer to the same pin configuration + node, which sets the host as a strobe signal provider. Entry + "isp" must refer to the pin configuration node, which sets the + ISP as a strobe signal provider. + +A discrete LED element connected to the device must be represented by a child +node - see Documentation/devicetree/bindings/leds/common.txt. + +Required properties of the LED child node: +- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt + Maximum flash LED supply current can be calculated using + following formula: I = 1A * 162kohm / Rset. +- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt + Maximum flash timeout can be calculated using following + formula: T = 8.82 * 10^9 * Ct. + +Optional properties of the LED child node: +- label : see Documentation/devicetree/bindings/leds/common.txt + +Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with +a switch that allows for routing strobe signal either from the host or from +the camera sensor): + +#include "exynos4412.dtsi" + +aat1290 { + compatible = "skyworks,aat1290"; + flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; + enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "host", "isp"; + pinctrl-0 = <&camera_flash_host>; + pinctrl-1 = <&camera_flash_host>; + pinctrl-2 = <&camera_flash_isp>; + + camera_flash: flash-led { + label = "aat1290-flash"; + led-max-microamp = <520833>; + flash-max-microamp = <1012500>; + flash-max-timeout-us = <1940000>; + }; +}; + +&pinctrl_0 { + camera_flash_host: camera-flash-host { + samsung,pins = "gpj1-0"; + samsung,pin-function = <1>; + samsung,pin-val = <0>; + }; + + camera_flash_isp: camera-flash-isp { + samsung,pins = "gpj1-0"; + samsung,pin-function = <1>; + samsung,pin-val = <1>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/kernel/Documentation/devicetree/bindings/leds/leds-bcm6328.txt new file mode 100644 index 000000000..3f48c1eaf --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/leds/leds-bcm6328.txt @@ -0,0 +1,319 @@ +LEDs connected to Broadcom BCM6328 controller + +This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. +In these SoCs it's possible to control LEDs both as GPIOs or by hardware. +However, on some devices there are Serial LEDs (LEDs connected to a 74x164 +controller), which can either be controlled by software (exporting the 74x164 +as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or +by hardware using this driver. +Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and +exporting the 74x164 as spi-gpio prevents those LEDs to be hardware +controlled, so the only chance to keep them working is by using this driver. + +BCM6328 LED controller has a HWDIS register, which controls whether a LED +should be controlled by a hardware signal instead of the MODE register value, +with 0 meaning hardware control enabled and 1 hardware control disabled. This +is usually 1:1 for hardware to LED signals, but through the activity/link +registers you have some limited control over rerouting the LEDs (as +explained later in brcm,link-signal-sources). Even if a LED is hardware +controlled you are still able to make it blink or light it up if it isn't, +but you can't turn it off if the hardware decides to light it up. For this +reason, hardware controlled LEDs aren't registered as LED class devices. + +Required properties: + - compatible : should be "brcm,bcm6328-leds". + - #address-cells : must be 1. + - #size-cells : must be 0. + - reg : BCM6328 LED controller address and size. + +Optional properties: + - brcm,serial-leds : Boolean, enables Serial LEDs. + Default : false + - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing. + Default : false + - brcm,serial-clk-low : Boolean, makes clock signal active low. + Default : false + - brcm,serial-dat-low : Boolean, makes data signal active low. + Default : false + - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction. + Default : false + +Each LED is represented as a sub-node of the brcm,bcm6328-leds device. + +LED sub-node required properties: + - reg : LED pin number (only LEDs 0 to 23 are valid). + +LED sub-node optional properties: + a) Optional properties for sub-nodes related to software controlled LEDs: + - label : see Documentation/devicetree/bindings/leds/common.txt + - active-low : Boolean, makes LED active low. + Default : false + - default-state : see + Documentation/devicetree/bindings/leds/leds-gpio.txt + - linux,default-trigger : see + Documentation/devicetree/bindings/leds/common.txt + + b) Optional properties for sub-nodes related to hardware controlled LEDs: + - brcm,hardware-controlled : Boolean, makes this LED hardware controlled. + Default : false + - brcm,link-signal-sources : An array of hardware link + signal sources. Up to four link hardware signals can get muxed into + these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may + be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs + 4 to 7. A signal can be muxed to more than one LED, and one LED can + have more than one source signal. + - brcm,activity-signal-sources : An array of hardware activity + signal sources. Up to four activity hardware signals can get muxed into + these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may + be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs + 4 to 7. A signal can be muxed to more than one LED, and one LED can + have more than one source signal. + +Examples: +Scenario 1 : BCM6328 with 4 EPHY LEDs + leds0: led-controller@10000800 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10000800 0x24>; + + alarm_red@2 { + reg = <2>; + active-low; + label = "red:alarm"; + }; + inet_green@3 { + reg = <3>; + active-low; + label = "green:inet"; + }; + power_green@4 { + reg = <4>; + active-low; + label = "green:power"; + default-state = "on"; + }; + ephy0_spd@17 { + reg = <17>; + brcm,hardware-controlled; + }; + ephy1_spd@18 { + reg = <18>; + brcm,hardware-controlled; + }; + ephy2_spd@19 { + reg = <19>; + brcm,hardware-controlled; + }; + ephy3_spd@20 { + reg = <20>; + brcm,hardware-controlled; + }; + }; + +Scenario 2 : BCM63268 with Serial/GPHY0 LEDs + leds0: led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + brcm,serial-leds; + brcm,serial-dat-low; + brcm,serial-shift-inv; + + gphy0_spd0@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + }; + gphy0_spd1@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,link-signal-sources = <1>; + }; + inet_red@2 { + reg = <2>; + active-low; + label = "red:inet"; + }; + dsl_green@3 { + reg = <3>; + active-low; + label = "green:dsl"; + }; + usb_green@4 { + reg = <4>; + active-low; + label = "green:usb"; + }; + wps_green@7 { + reg = <7>; + active-low; + label = "green:wps"; + }; + inet_green@8 { + reg = <8>; + active-low; + label = "green:inet"; + }; + ephy0_act@9 { + reg = <9>; + brcm,hardware-controlled; + }; + ephy1_act@10 { + reg = <10>; + brcm,hardware-controlled; + }; + ephy2_act@11 { + reg = <11>; + brcm,hardware-controlled; + }; + gphy0_act@12 { + reg = <12>; + brcm,hardware-controlled; + }; + ephy0_spd@13 { + reg = <13>; + brcm,hardware-controlled; + }; + ephy1_spd@14 { + reg = <14>; + brcm,hardware-controlled; + }; + ephy2_spd@15 { + reg = <15>; + brcm,hardware-controlled; + }; + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + +Scenario 3 : BCM6362 with 1 LED for each EPHY + leds0: led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0>; + /* USB link/activity routed to USB LED */ + }; + inet@1 { + reg = <1>; + brcm,hardware-controlled; + brcm,activity-signal-sources = <1>; + /* INET activity routed to INET LED */ + }; + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY0 LED */ + }; + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY1 LED */ + }; + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY2 LED */ + }; + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY3 LED */ + }; + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + +Scenario 4 : BCM6362 with 1 LED for all EPHYs + leds0: led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0 1>; + brcm,activity-signal-sources = <0 1>; + /* USB/INET link/activity routed to USB LED */ + }; + ephy@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4 5 6 7>; + /* EPHY0/1/2/3 link routed to EPHY0 LED */ + }; + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; + +Scenario 5 : BCM6362 with EPHY LEDs swapped + leds0: led-controller@10001900 { + compatible = "brcm,bcm6328-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10001900 0x24>; + + usb@0 { + reg = <0>; + brcm,hardware-controlled; + brcm,link-signal-sources = <0>; + brcm,activity-signal-sources = <0 1>; + /* USB link/act and INET act routed to USB LED */ + }; + ephy0@4 { + reg = <4>; + brcm,hardware-controlled; + brcm,link-signal-sources = <7>; + /* EPHY3 link routed to EPHY0 LED */ + }; + ephy1@5 { + reg = <5>; + brcm,hardware-controlled; + brcm,link-signal-sources = <6>; + /* EPHY2 link routed to EPHY1 LED */ + }; + ephy2@6 { + reg = <6>; + brcm,hardware-controlled; + brcm,link-signal-sources = <5>; + /* EPHY1 link routed to EPHY2 LED */ + }; + ephy3@7 { + reg = <7>; + brcm,hardware-controlled; + brcm,link-signal-sources = <4>; + /* EPHY0 link routed to EPHY3 LED */ + }; + power_green@20 { + reg = <20>; + active-low; + label = "green:power"; + default-state = "on"; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/kernel/Documentation/devicetree/bindings/leds/leds-bcm6358.txt new file mode 100644 index 000000000..b22a55bcc --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/leds/leds-bcm6358.txt @@ -0,0 +1,145 @@ +LEDs connected to Broadcom BCM6358 controller + +This controller is present on BCM6358 and BCM6368. +In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller), +which can either be controlled by software (exporting the 74x164 as spi-gpio. +See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or +by hardware using this driver. + +Required properties: + - compatible : should be "brcm,bcm6358-leds". + - #address-cells : must be 1. + - #size-cells : must be 0. + - reg : BCM6358 LED controller address and size. + +Optional properties: + - brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8. + Default : 1 + - brcm,clk-dat-low : Boolean, makes clock and data signals active low. + Default : false + +Each LED is represented as a sub-node of the brcm,bcm6358-leds device. + +LED sub-node required properties: + - reg : LED pin number (only LEDs 0 to 31 are valid). + +LED sub-node optional properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + - active-low : Boolean, makes LED active low. + Default : false + - default-state : see + Documentation/devicetree/bindings/leds/leds-gpio.txt + - linux,default-trigger : see + Documentation/devicetree/bindings/leds/common.txt + +Examples: +Scenario 1 : BCM6358 + leds0: led-controller@fffe00d0 { + compatible = "brcm,bcm6358-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfffe00d0 0x8>; + + alarm_white { + reg = <0>; + active-low; + label = "white:alarm"; + }; + tv_white { + reg = <2>; + active-low; + label = "white:tv"; + }; + tel_white { + reg = <3>; + active-low; + label = "white:tel"; + }; + adsl_white { + reg = <4>; + active-low; + label = "white:adsl"; + }; + }; + +Scenario 2 : BCM6368 + leds0: led-controller@100000d0 { + compatible = "brcm,bcm6358-leds"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100000d0 0x8>; + brcm,pol-low; + brcm,clk-div = <4>; + + power_red { + reg = <0>; + active-low; + label = "red:power"; + }; + power_green { + reg = <1>; + active-low; + label = "green:power"; + default-state = "on"; + }; + power_blue { + reg = <2>; + label = "blue:power"; + }; + broadband_red { + reg = <3>; + active-low; + label = "red:broadband"; + }; + broadband_green { + reg = <4>; + label = "green:broadband"; + }; + broadband_blue { + reg = <5>; + active-low; + label = "blue:broadband"; + }; + wireless_red { + reg = <6>; + active-low; + label = "red:wireless"; + }; + wireless_green { + reg = <7>; + active-low; + label = "green:wireless"; + }; + wireless_blue { + reg = <8>; + label = "blue:wireless"; + }; + phone_red { + reg = <9>; + active-low; + label = "red:phone"; + }; + phone_green { + reg = <10>; + active-low; + label = "green:phone"; + }; + phone_blue { + reg = <11>; + label = "blue:phone"; + }; + upgrading_red { + reg = <12>; + active-low; + label = "red:upgrading"; + }; + upgrading_green { + reg = <13>; + active-low; + label = "green:upgrading"; + }; + upgrading_blue { + reg = <14>; + label = "blue:upgrading"; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/kernel/Documentation/devicetree/bindings/leds/leds-ktd2692.txt new file mode 100644 index 000000000..853737452 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/leds/leds-ktd2692.txt @@ -0,0 +1,50 @@ +* Kinetic Technologies - KTD2692 Flash LED Driver + +KTD2692 is the ideal power solution for high-power flash LEDs. +It uses ExpressWire single-wire programming for maximum flexibility. + +The ExpressWire interface through CTRL pin can control LED on/off and +enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current, +Flash timeout, LVP(low voltage protection). + +Also, When the AUX pin is pulled high while CTRL pin is high, +LED current will be ramped up to the flash-mode current level. + +Required properties: +- compatible : Should be "kinetic,ktd2692". +- ctrl-gpios : Specifier of the GPIO connected to CTRL pin. +- aux-gpios : Specifier of the GPIO connected to AUX pin. + +Optional properties: +- vin-supply : "vin" LED supply (2.7V to 5.5V). + See Documentation/devicetree/bindings/regulator/regulator.txt + +A discrete LED element connected to the device must be represented by a child +node - See Documentation/devicetree/bindings/leds/common.txt + +Required properties for flash LED child nodes: + See Documentation/devicetree/bindings/leds/common.txt +- led-max-microamp : Minimum Threshold for Timer protection + is defined internally (Maximum 300mA). +- flash-max-microamp : Flash LED maximum current + Formula : I(mA) = 15000 / Rset. +- flash-max-timeout-us : Flash LED maximum timeout. + +Optional properties for flash LED child nodes: +- label : See Documentation/devicetree/bindings/leds/common.txt + +Example: + +ktd2692 { + compatible = "kinetic,ktd2692"; + ctrl-gpios = <&gpc0 1 0>; + aux-gpios = <&gpc0 2 0>; + vin-supply = <&vbat>; + + flash-led { + label = "ktd2692-flash"; + led-max-microamp = <300000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1835000>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/kernel/Documentation/devicetree/bindings/leds/leds-netxbig.txt new file mode 100644 index 000000000..5ef92a26d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/leds/leds-netxbig.txt @@ -0,0 +1,92 @@ +Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate +boards (Example: 2Big/5Big Network v2, 2Big NAS). + +Required properties: +- compatible: "lacie,netxbig-leds". +- gpio-ext: Phandle for the gpio-ext bus. + +Optional properties: +- timers: Timer array. Each timer entry is represented by three integers: + Mode (gpio-ext bus), delay_on and delay_off. + +Each LED is represented as a sub-node of the netxbig-leds device. + +Required sub-node properties: +- mode-addr: Mode register address on gpio-ext bus. +- mode-val: Mode to value mapping. Each entry is represented by two integers: + A mode and the corresponding value on the gpio-ext bus. +- bright-addr: Brightness register address on gpio-ext bus. +- max-brightness: Maximum brightness value. + +Optional sub-node properties: +- label: Name for this LED. If omitted, the label is taken from the node name. +- linux,default-trigger: Trigger assigned to the LED. + +Example: + +netxbig-leds { + compatible = "lacie,netxbig-leds"; + + gpio-ext = &gpio_ext; + + timers = <NETXBIG_LED_TIMER1 500 500 + NETXBIG_LED_TIMER2 500 1000>; + + blue-power { + label = "netxbig:blue:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 1 + NETXBIG_LED_TIMER1 3 + NETXBIG_LED_TIMER2 7>; + bright-addr = <1>; + max-brightness = <7>; + }; + red-power { + label = "netxbig:red:power"; + mode-addr = <0>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <1>; + max-brightness = <7>; + }; + blue-sata0 { + label = "netxbig:blue:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata0 { + label = "netxbig:red:sata0"; + mode-addr = <3>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; + blue-sata1 { + label = "netxbig:blue:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 7 + NETXBIG_LED_SATA 1 + NETXBIG_LED_TIMER1 3>; + bright-addr = <2>; + max-brightness = <7>; + }; + red-sata1 { + label = "netxbig:red:sata1"; + mode-addr = <4>; + mode-val = <NETXBIG_LED_OFF 0 + NETXBIG_LED_ON 2 + NETXBIG_LED_TIMER1 4>; + bright-addr = <2>; + max-brightness = <7>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-ns2.txt b/kernel/Documentation/devicetree/bindings/leds/leds-ns2.txt index aef3aca34..9f81258a5 100644 --- a/kernel/Documentation/devicetree/bindings/leds/leds-ns2.txt +++ b/kernel/Documentation/devicetree/bindings/leds/leds-ns2.txt @@ -8,6 +8,9 @@ Each LED is represented as a sub-node of the ns2-leds device. Required sub-node properties: - cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification. - slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification. +- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and + the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations + should be given in order to avoid having an unknown mode at driver probe time. Optional sub-node properties: - label: Name for this LED. If omitted, the label is taken from the node name. @@ -15,6 +18,8 @@ Optional sub-node properties: Example: +#include <dt-bindings/leds/leds-ns2.h> + ns2-leds { compatible = "lacie,ns2-leds"; @@ -22,5 +27,9 @@ ns2-leds { label = "ns2:blue:sata"; slow-gpio = <&gpio0 29 0>; cmd-gpio = <&gpio0 30 0>; + modes-map = <NS_V2_LED_OFF 0 1 + NS_V2_LED_ON 1 0 + NS_V2_LED_ON 0 0 + NS_V2_LED_SATA 1 1>; }; }; diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-powernv.txt b/kernel/Documentation/devicetree/bindings/leds/leds-powernv.txt new file mode 100644 index 000000000..66655690f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/leds/leds-powernv.txt @@ -0,0 +1,26 @@ +Device Tree binding for LEDs on IBM Power Systems +------------------------------------------------- + +Required properties: +- compatible : Should be "ibm,opal-v3-led". +- led-mode : Should be "lightpath" or "guidinglight". + +Each location code of FRU/Enclosure must be expressed in the +form of a sub-node. + +Required properties for the sub nodes: +- led-types : Supported LED types (attention/identify/fault) provided + in the form of string array. + +Example: + +leds { + compatible = "ibm,opal-v3-led"; + led-mode = "lightpath"; + + U78C9.001.RST0027-P1-C1 { + led-types = "identify", "fault"; + }; + ... + ... +}; diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt b/kernel/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt new file mode 100644 index 000000000..3bbbf7024 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt @@ -0,0 +1,40 @@ +LEDs connected to tlc59116 or tlc59108 + +Required properties +- compatible: should be "ti,tlc59116" or "ti,tlc59108" +- #address-cells: must be 1 +- #size-cells: must be 0 +- reg: typically 0x68 + +Each led is represented as a sub-node of the ti,tlc59116. +See Documentation/devicetree/bindings/leds/common.txt + +LED sub-node properties: +- reg: number of LED line, 0 to 15 or 0 to 7 +- label: (optional) name of LED +- linux,default-trigger : (optional) + +Examples: + +tlc59116@68 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,tlc59116"; + reg = <0x68>; + + wan@0 { + label = "wrt1900ac:amber:wan"; + reg = <0x0>; + }; + + 2g@2 { + label = "wrt1900ac:white:2g"; + reg = <0x2>; + }; + + alive@9 { + label = "wrt1900ac:green:alive"; + reg = <0x9>; + linux,default_trigger = "heartbeat"; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/kernel/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt new file mode 100644 index 000000000..e893615ef --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt @@ -0,0 +1,26 @@ +Broadcom BCM2835 VideoCore mailbox IPC + +Required properties: + +- compatible: Should be "brcm,bcm2835-mbox" +- reg: Specifies base physical address and size of the registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +- #mbox-cells: Specifies the number of cells needed to encode a mailbox + channel. The value shall be 0, since there is only one + mailbox channel implemented by the device. + +Example: + +mailbox: mailbox@7e00b800 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; +}; + +firmware: firmware { + compatible = "raspberrypi,firmware"; + mboxes = <&mailbox>; + #power-domain-cells = <1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/mailbox/mailbox.txt b/kernel/Documentation/devicetree/bindings/mailbox/mailbox.txt index 1a2cd3d26..be05b9746 100644 --- a/kernel/Documentation/devicetree/bindings/mailbox/mailbox.txt +++ b/kernel/Documentation/devicetree/bindings/mailbox/mailbox.txt @@ -22,17 +22,11 @@ Required property: - mboxes: List of phandle and mailbox channel specifiers. Optional property: -- mbox-names: List of identifier strings for each mailbox channel - required by the client. The use of this property - is discouraged in favor of using index in list of - 'mboxes' while requesting a mailbox. Instead the - platforms may define channel indices, in DT headers, - to something legible. +- mbox-names: List of identifier strings for each mailbox channel. Example: pwr_cntrl: power { ... mbox-names = "pwr-ctrl", "rpc"; - mboxes = <&mailbox 0 - &mailbox 1>; + mboxes = <&mailbox 0 &mailbox 1>; }; diff --git a/kernel/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/kernel/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt index d1a043339..9b40c4925 100644 --- a/kernel/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt +++ b/kernel/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt @@ -75,6 +75,14 @@ data that represent the following: Cell #3 (usr_id) - mailbox user id for identifying the interrupt line associated with generating a tx/rx fifo interrupt. +Optional Properties: +-------------------- +- ti,mbox-send-noirq: Quirk flag to allow the client user of this sub-mailbox + to send messages without triggering a Tx ready interrupt, + and to control the Tx ticker. Should be used only on + sub-mailboxes used to communicate with WkupM3 remote + processor on AM33xx/AM43xx SoCs. + Mailbox Users: ============== A device needing to communicate with a target processor device should specify diff --git a/kernel/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt b/kernel/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt new file mode 100644 index 000000000..b61eec920 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt @@ -0,0 +1,51 @@ +ST Microelectronics Mailbox Driver + +Each ST Mailbox IP currently consists of 4 instances of 32 channels. Messages +are passed between Application and Remote processors using shared memory. + +Controller +---------- + +Required properties: +- compatible : Should be "st,stih407-mailbox" +- reg : Offset and length of the device's register set +- mbox-name : Name of the mailbox +- #mbox-cells: : Must be 2 + <&phandle instance channel direction> + phandle : Label name of controller + instance : Instance number + channel : Channel number + +Optional properties +- interrupts : Contains the IRQ line for a Rx mailbox + +Example: + +mailbox0: mailbox@0 { + compatible = "st,stih407-mailbox"; + reg = <0x08f00000 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>; + #mbox-cells = <2>; + mbox-name = "a9"; +}; + +Client +------ + +Required properties: +- compatible : Many (See the client docs) +- reg : Shared (between Application and Remote) memory address +- mboxes : Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Controller docs above) + +Optional properties +- mbox-names : Name given to channels seen in the 'mboxes' property. + +Example: + +mailbox_test { + compatible = "mailbox_test"; + reg = <0x[shared_memory_address], [shared_memory_size]>; + mboxes = <&mailbox2 0 1>, <&mailbox0 2 1>; + mbox-names = "tx", "rx"; +}; diff --git a/kernel/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/kernel/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt index 4ef45636e..38941db23 100644 --- a/kernel/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt +++ b/kernel/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt @@ -4,7 +4,8 @@ Required properties: - compatible : should be one of: "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg", - "samsung,exynos3250-jpeg", "samsung,exynos5420-jpeg"; + "samsung,exynos3250-jpeg", "samsung,exynos5420-jpeg", + "samsung,exynos5433-jpeg"; - reg : address and length of the JPEG codec IP register set; - interrupts : specifies the JPEG codec IP interrupt; - clock-names : should contain: diff --git a/kernel/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/kernel/Documentation/devicetree/bindings/media/i2c/adp1653.txt new file mode 100644 index 000000000..5ce66f210 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/media/i2c/adp1653.txt @@ -0,0 +1,37 @@ +* Analog Devices ADP1653 flash LED driver + +Required Properties: + + - compatible: Must contain "adi,adp1653" + + - reg: I2C slave address + + - enable-gpios: Specifier of the GPIO connected to EN pin + +There are two LED outputs available - flash and indicator. One LED is +represented by one child node, nodes need to be named "flash" and "indicator". + +Required properties of the LED child node: +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt + +Required properties of the flash LED child node: + +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt + +Example: + + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-us = <500000>; + flash-max-microamp = <320000>; + max-microamp = <50000>; + }; + indicator { + max-microamp = <17500>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/kernel/Documentation/devicetree/bindings/media/i2c/adv7604.txt index c27cede3b..8337f75c7 100644 --- a/kernel/Documentation/devicetree/bindings/media/i2c/adv7604.txt +++ b/kernel/Documentation/devicetree/bindings/media/i2c/adv7604.txt @@ -1,15 +1,17 @@ -* Analog Devices ADV7604/11 video decoder with HDMI receiver +* Analog Devices ADV7604/11/12 video decoder with HDMI receiver -The ADV7604 and ADV7611 are multiformat video decoders with an integrated HDMI -receiver. The ADV7604 has four multiplexed HDMI inputs and one analog input, -and the ADV7611 has one HDMI input and no analog input. +The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated +HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog +input, and the ADV7611 has one HDMI input and no analog input. The 7612 is +similar to the 7611 but has 2 HDMI inputs. -These device tree bindings support the ADV7611 only at the moment. +These device tree bindings support the ADV7611/12 only at the moment. Required Properties: - compatible: Must contain one of the following - "adi,adv7611" for the ADV7611 + - "adi,adv7612" for the ADV7612 - reg: I2C slave address @@ -22,10 +24,10 @@ port, in accordance with the video interface bindings defined in Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes are numbered as follows. - Port ADV7611 + Port ADV7611 ADV7612 ------------------------------------------------------------ - HDMI 0 - Digital output 1 + HDMI 0 0, 1 + Digital output 1 2 The digital output port node must contain at least one endpoint. @@ -45,6 +47,7 @@ Optional Endpoint Properties: If none of hsync-active, vsync-active and pclk-sample is specified the endpoint will use embedded BT.656 synchronization. + - default-input: Select which input is selected after reset. Example: @@ -58,6 +61,8 @@ Example: #address-cells = <1>; #size-cells = <0>; + default-input = <0>; + port@0 { reg = <0>; }; diff --git a/kernel/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/kernel/Documentation/devicetree/bindings/media/i2c/tc358743.txt new file mode 100644 index 000000000..521892162 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/media/i2c/tc358743.txt @@ -0,0 +1,48 @@ +* Toshiba TC358743 HDMI-RX to MIPI CSI2-TX Bridge + +The Toshiba TC358743 HDMI-RX to MIPI CSI2-TX (H2C) is a bridge that converts +a HDMI stream to MIPI CSI-2 TX. It is programmable through I2C. + +Required Properties: + +- compatible: value should be "toshiba,tc358743" +- clocks, clock-names: should contain a phandle link to the reference clock + source, the clock input is named "refclk". + +Optional Properties: + +- reset-gpios: gpio phandle GPIO connected to the reset pin +- interrupts, interrupt-parent: GPIO connected to the interrupt pin +- data-lanes: should be <1 2 3 4> for four-lane operation, + or <1 2> for two-lane operation +- clock-lanes: should be <0> +- clock-noncontinuous: Presence of this boolean property decides whether the + MIPI CSI-2 clock is continuous or non-continuous. +- link-frequencies: List of allowed link frequencies in Hz. Each frequency is + expressed as a 64-bit big-endian integer. The frequency + is half of the bps per lane due to DDR transmission. + +For further information on the MIPI CSI-2 endpoint node properties, see +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + tc358743@0f { + compatible = "toshiba,tc358743"; + reg = <0x0f>; + clocks = <&hdmi_osc>; + clock-names = "refclk"; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + port { + tc358743_out: endpoint { + remote-endpoint = <&mipi_csi2_in>; + data-lanes = <1 2 3 4>; + clock-lanes = <0>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <297000000>; + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/media/renesas,jpu.txt b/kernel/Documentation/devicetree/bindings/media/renesas,jpu.txt new file mode 100644 index 000000000..0cb94201b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/media/renesas,jpu.txt @@ -0,0 +1,24 @@ +* Renesas JPEG Processing Unit + +The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding +and decoding function conforming to the JPEG baseline process, so that the JPU +can encode image data and decode JPEG data quickly. + +Required properties: + - compatible: should containg one of the following: + - "renesas,jpu-r8a7790" for R-Car H2 + - "renesas,jpu-r8a7791" for R-Car M2-W + - "renesas,jpu-r8a7792" for R-Car V2H + - "renesas,jpu-r8a7793" for R-Car M2-N + + - reg: Base address and length of the registers block for the JPU. + - interrupts: JPU interrupt specifier. + - clocks: A phandle + clock-specifier pair for the JPU functional clock. + +Example: R8A7790 (R-Car H2) JPU node + jpeg-codec@fe980000 { + compatible = "renesas,jpu-r8a7790"; + reg = <0 0xfe980000 0 0x10300>; + interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_JPU>; + }; diff --git a/kernel/Documentation/devicetree/bindings/media/st,stih4xx.txt b/kernel/Documentation/devicetree/bindings/media/st,stih4xx.txt new file mode 100644 index 000000000..df655cd3a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/media/st,stih4xx.txt @@ -0,0 +1,32 @@ +STMicroelectronics stih4xx platforms + +bdisp: 2D blitter for STMicroelectronics SoC. + +Required properties: +- compatible: should be "st,stih407-bdisp". +- reg: BDISP physical address location and length. +- interrupts: BDISP interrupt number. +- clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend on the SoC type. + See ../clocks/clock-bindings.txt for details. +- clock-names: names of the clocks listed in clocks property in the same order. + +Example: + + bdisp0:bdisp@9f10000 { + compatible = "st,stih407-bdisp"; + reg = <0x9f10000 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>; + clock-names = "bdisp"; + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>; + }; + +Aliases: +Each BDISP should have a numbered alias in the aliases node, in the form of +bdispN, N = 0 or 1. + +Example: + + aliases { + bdisp0 = &bdisp0; + }; diff --git a/kernel/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/kernel/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt new file mode 100644 index 000000000..d4def767b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -0,0 +1,89 @@ +STMicroelectronics STi c8sectpfe binding +============================================ + +This document describes the c8sectpfe device bindings that is used to get transport +stream data into the SoC on the TS pins, and into DDR for further processing. + +It is typically used in conjunction with one or more demodulator and tuner devices +which converts from the RF to digital domain. Demodulators and tuners are usually +located on an external DVB frontend card connected to SoC TS input pins. + +Currently 7 TS input (tsin) channels are supported on the stih407 family SoC. + +Required properties (controller (parent) node): +- compatible : Should be "stih407-c8sectpfe" + +- reg : Address and length of register sets for each device in + "reg-names" + +- reg-names : The names of the register addresses corresponding to the + registers filled in "reg": + - c8sectpfe: c8sectpfe registers + - c8sectpfe-ram: c8sectpfe internal sram + +- clocks : phandle list of c8sectpfe clocks +- clock-names : should be "c8sectpfe" +See: Documentation/devicetree/bindings/clock/clock-bindings.txt + +- pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num) + must be defined for each tsin child node. +- pinctrl-0 : phandle referencing pin configuration for this tsin configuration +See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + + +Required properties (tsin (child) node): + +- tsin-num : tsin id of the InputBlock (must be between 0 to 6) +- i2c-bus : phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected. +- rst-gpio : reset gpio for this tsin channel. + +Optional properties (tsin (child) node): + +- invert-ts-clk : Bool property to control sense of ts input clock (data stored on falling edge of clk). +- serial-not-parallel : Bool property to configure input bus width (serial on ts_data<7>). +- async-not-sync : Bool property to control if data is received in asynchronous mode + (all bits/bytes with ts_valid or ts_packet asserted are valid). + +- dvb-card : Describes the NIM card connected to this tsin channel. + +Example: + +/* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */ + + c8sectpfe@08a20000 { + compatible = "st,stih407-c8sectpfe"; + status = "okay"; + reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; + reg-names = "stfe", "stfe-ram"; + interrupts = <0 34 0>, <0 35 0>; + interrupt-names = "stfe-error-irq", "stfe-idle-irq"; + + pinctrl-names = "tsin0-serial", "tsin0-parallel", "tsin3-serial", + "tsin4-serial", "tsin5-serial"; + + pinctrl-0 = <&pinctrl_tsin0_serial>; + pinctrl-1 = <&pinctrl_tsin0_parallel>; + pinctrl-2 = <&pinctrl_tsin3_serial>; + pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; + pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; + + clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; + clock-names = "stfe"; + + /* tsin0 is TSA on NIMA */ + tsin0: port@0 { + tsin-num = <0>; + serial-not-parallel; + i2c-bus = <&ssc2>; + rst-gpio = <&pio15 4 0>; + dvb-card = <STV0367_TDA18212_NIMA_1>; + }; + + tsin3: port@3 { + tsin-num = <3>; + serial-not-parallel; + i2c-bus = <&ssc3>; + rst-gpio = <&pio15 7 0>; + dvb-card = <STV0367_TDA18212_NIMB_1>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt new file mode 100644 index 000000000..22b77ee02 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt @@ -0,0 +1,127 @@ +* Device tree bindings for ARM PL172/PL175/PL176 MultiPort Memory Controller + +Required properties: + +- compatible: Must be "arm,primecell" and exactly one from + "arm,pl172", "arm,pl175" or "arm,pl176". + +- reg: Must contains offset/length value for controller. + +- #address-cells: Must be 2. The partition number has to be encoded in the + first address cell and it may accept values 0..N-1 + (N - total number of partitions). The second cell is the + offset into the partition. + +- #size-cells: Must be set to 1. + +- ranges: Must contain one or more chip select memory regions. + +- clocks: Must contain references to controller clocks. + +- clock-names: Must contain "mpmcclk" and "apb_pclk". + +- clock-ranges: Empty property indicating that child nodes can inherit + named clocks. Required only if clock tree data present + in device tree. + See clock-bindings.txt + +Child chip-select (cs) nodes contain the memory devices nodes connected to +such as NOR (e.g. cfi-flash) and NAND. + +Required child cs node properties: + +- #address-cells: Must be 2. + +- #size-cells: Must be 1. + +- ranges: Empty property indicating that child nodes can inherit + memory layout. + +- clock-ranges: Empty property indicating that child nodes can inherit + named clocks. Required only if clock tree data present + in device tree. + +- mpmc,cs: Chip select number. Indicates to the pl0172 driver + which chipselect is used for accessing the memory. + +- mpmc,memory-width: Width of the chip select memory. Must be equal to + either 8, 16 or 32. + +Optional child cs node config properties: + +- mpmc,async-page-mode: Enable asynchronous page mode. + +- mpmc,cs-active-high: Set chip select polarity to active high. + +- mpmc,byte-lane-low: Set byte lane state to low. + +- mpmc,extended-wait: Enable extended wait. + +- mpmc,buffer-enable: Enable write buffer, option is not supported by + PL175 and PL176 controllers. + +- mpmc,write-protect: Enable write protect. + +Optional child cs node timing properties: + +- mpmc,write-enable-delay: Delay from chip select assertion to write + enable (WE signal) in nano seconds. + +- mpmc,output-enable-delay: Delay from chip select assertion to output + enable (OE signal) in nano seconds. + +- mpmc,write-access-delay: Delay from chip select assertion to write + access in nano seconds. + +- mpmc,read-access-delay: Delay from chip select assertion to read + access in nano seconds. + +- mpmc,page-mode-read-delay: Delay for asynchronous page mode sequential + accesses in nano seconds. + +- mpmc,turn-round-delay: Delay between access to memory banks in nano + seconds. + +If any of the above timing parameters are absent, current parameter value will +be taken from the corresponding HW reg. + +Example for pl172 with nor flash on chip select 0 shown below. + +emc: memory-controller@40005000 { + compatible = "arm,pl172", "arm,primecell"; + reg = <0x40005000 0x1000>; + clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; + clock-names = "mpmcclk", "apb_pclk"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x1c000000 0x1000000 + 1 0 0x1d000000 0x1000000 + 2 0 0x1e000000 0x1000000 + 3 0 0x1f000000 0x1000000>; + + cs0 { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + mpmc,cs = <0>; + mpmc,memory-width = <16>; + mpmc,byte-lane-low; + mpmc,write-enable-delay = <0>; + mpmc,output-enable-delay = <0>; + mpmc,read-enable-delay = <70>; + mpmc,page-mode-read-delay = <70>; + + flash@0,0 { + compatible = "sst,sst39vf320", "cfi-flash"; + reg = <0 0 0x400000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "data"; + reg = <0 0x400000>; + }; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt new file mode 100644 index 000000000..efe35a065 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/ath79-ddr-controller.txt @@ -0,0 +1,35 @@ +Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller + +The DDR controller of the ARxxx and AR9xxx families provides an interface +to flush the FIFO between various devices and the DDR. This is mainly used +by the IRQ controller to flush the FIFO before running the interrupt handler +of such devices. + +Required properties: + +- compatible: has to be "qca,<soc-type>-ddr-controller", + "qca,[ar7100|ar7240]-ddr-controller" as fallback. + On SoC with PCI support "qca,ar7100-ddr-controller" should be used as + fallback, otherwise "qca,ar7240-ddr-controller" should be used. +- reg: Base address and size of the controllers memory area +- #qca,ddr-wb-channel-cells: has to be 1, the index of the write buffer + channel + +Example: + + ddr_ctrl: memory-controller@18000000 { + compatible = "qca,ar9132-ddr-controller", + "qca,ar7240-ddr-controller"; + reg = <0x18000000 0x100>; + + #qca,ddr-wb-channel-cells = <1>; + }; + + ... + + interrupt-controller { + ... + qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; + qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, + <&ddr_ctrl 0>, <&ddr_ctrl 1>; + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt index 049675944..049675944 100644 --- a/kernel/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.txt diff --git a/kernel/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt index d5e370450..89427b018 100644 --- a/kernel/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt @@ -18,6 +18,8 @@ Properties: interrupt (NAND_EVTER_STAT). If there is only one, that interrupt reports both types of event. +- little-endian : If this property is absent, the big-endian mode will + be in use as default for registers. - ranges : Each range corresponds to a single chipselect, and covers the entire access window as configured. @@ -34,6 +36,7 @@ Example: #size-cells = <1>; reg = <0x0 0xffe1e000 0 0x2000>; interrupts = <16 2 19 2>; + little-endian; /* NOR, NAND Flashes and CPLD on board */ ranges = <0x0 0x0 0x0 0xee000000 0x02000000 diff --git a/kernel/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt index f3db93c85..3338a2834 100644 --- a/kernel/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt @@ -1,6 +1,9 @@ NVIDIA Tegra Memory Controller device tree bindings =================================================== +memory-controller node +---------------------- + Required properties: - compatible: Should be "nvidia,tegra<chip>-mc" - reg: Physical base address and length of the controller's registers. @@ -15,9 +18,49 @@ Required properties: This device implements an IOMMU that complies with the generic IOMMU binding. See ../iommu/iommu.txt for details. -Example: --------- +emc-timings subnode +------------------- + +The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in +register PMC_STRAPPING_OPT_A). + +Required properties for "emc-timings" nodes : +- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for. + +timing subnode +-------------- + +Each "emc-timings" node should contain a subnode for every supported EMC clock rate. + +Required properties for timing nodes : +- clock-frequency : Should contain the memory clock rate in Hz. +- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC +(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be +specified, according to the board documentation: + + MC_EMEM_ARB_CFG + MC_EMEM_ARB_OUTSTANDING_REQ + MC_EMEM_ARB_TIMING_RCD + MC_EMEM_ARB_TIMING_RP + MC_EMEM_ARB_TIMING_RC + MC_EMEM_ARB_TIMING_RAS + MC_EMEM_ARB_TIMING_FAW + MC_EMEM_ARB_TIMING_RRD + MC_EMEM_ARB_TIMING_RAP2PRE + MC_EMEM_ARB_TIMING_WAP2PRE + MC_EMEM_ARB_TIMING_R2R + MC_EMEM_ARB_TIMING_W2W + MC_EMEM_ARB_TIMING_R2W + MC_EMEM_ARB_TIMING_W2R + MC_EMEM_ARB_DA_TURNS + MC_EMEM_ARB_DA_COVERS + MC_EMEM_ARB_MISC0 + MC_EMEM_ARB_MISC1 + MC_EMEM_ARB_RING1_THROTTLE +Example SoC include file: + +/ { mc: memory-controller@0,70019000 { compatible = "nvidia,tegra124-mc"; reg = <0x0 0x70019000 0x0 0x1000>; @@ -34,3 +77,40 @@ Example: ... iommus = <&mc TEGRA_SWGROUP_SDMMC1A>; }; +}; + +Example board file: + +/ { + memory-controller@0,70019000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.txt new file mode 100644 index 000000000..cdf406c90 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.txt @@ -0,0 +1,12 @@ +* H8/300 bus controller + +Required properties: + - compatible: Must be "renesas,h8300-bsc". + - reg: Base address and length of BSC registers. + +Example. + bsc: memory-controller@fee01e { + compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc"; + reg = <0xfee01e 8>; + }; + diff --git a/kernel/Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt index c64b7925c..9f78e6c82 100644 --- a/kernel/Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/renesas-memory-controllers.txt @@ -24,9 +24,9 @@ Required properties: Optional properties: - interrupts: Must contain a list of interrupt specifiers for memory controller interrupts, if available. - - interrupts-names: Must contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Valid interrupt names are: + - interrupt-names: Must contain a list of interrupt names corresponding to + the interrupts in the interrupts property, if available. + Valid interrupt names are: - "sec" (secure interrupt) - "temp" (normal (temperature) interrupt) - power-domains: Must contain a reference to the PM domain that the memory diff --git a/kernel/Documentation/devicetree/bindings/memory-controllers/synopsys.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/synopsys.txt index f9c645414..a43d26d41 100644 --- a/kernel/Documentation/devicetree/bindings/memory-controllers/synopsys.txt +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/synopsys.txt @@ -1,5 +1,9 @@ Binding for Synopsys IntelliDDR Multi Protocol Memory Controller +This controller has an optional ECC support in half-bus width (16-bit) +configuration. The ECC controller corrects one bit error and detects +two bit errors. + Required properties: - compatible: Should be 'xlnx,zynq-ddrc-a05' - reg: Base address and size of the controllers memory area diff --git a/kernel/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt new file mode 100644 index 000000000..b59c625d6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt @@ -0,0 +1,374 @@ +NVIDIA Tegra124 SoC EMC (external memory controller) +==================================================== + +Required properties : +- compatible : Should be "nvidia,tegra124-emc". +- reg : physical base address and length of the controller's registers. +- nvidia,memory-controller : phandle of the MC driver. + +The node should contain a "emc-timings" subnode for each supported RAM type +(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address +being its RAM_CODE. + +Required properties for "emc-timings" nodes : +- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is +used for. + +Each "emc-timings" node should contain a "timing" subnode for every supported +EMC clock rate. The "timing" subnodes should have the clock rate in Hz as +their unit address. + +Required properties for "timing" nodes : +- clock-frequency : Should contain the memory clock rate in Hz. +- The following properties contain EMC timing characterization values +(specified in the board documentation) : + - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG + - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2 + - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3 + - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL + - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0 + - nvidia,emc-cfg : EMC_CFG + - nvidia,emc-cfg-2 : EMC_CFG_2 + - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL + - nvidia,emc-mode-1 : Mode Register 1 + - nvidia,emc-mode-2 : Mode Register 2 + - nvidia,emc-mode-4 : Mode Register 4 + - nvidia,emc-mode-reset : Mode Register 0 + - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT + - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL + - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2 + - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change + - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL +- nvidia,emc-configuration : EMC timing characterization data. These are the +registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to +be specified, according to the board documentation: + + EMC_RC + EMC_RFC + EMC_RFC_SLR + EMC_RAS + EMC_RP + EMC_R2W + EMC_W2R + EMC_R2P + EMC_W2P + EMC_RD_RCD + EMC_WR_RCD + EMC_RRD + EMC_REXT + EMC_WEXT + EMC_WDV + EMC_WDV_MASK + EMC_QUSE + EMC_QUSE_WIDTH + EMC_IBDLY + EMC_EINPUT + EMC_EINPUT_DURATION + EMC_PUTERM_EXTRA + EMC_PUTERM_WIDTH + EMC_PUTERM_ADJ + EMC_CDB_CNTL_1 + EMC_CDB_CNTL_2 + EMC_CDB_CNTL_3 + EMC_QRST + EMC_QSAFE + EMC_RDV + EMC_RDV_MASK + EMC_REFRESH + EMC_BURST_REFRESH_NUM + EMC_PRE_REFRESH_REQ_CNT + EMC_PDEX2WR + EMC_PDEX2RD + EMC_PCHG2PDEN + EMC_ACT2PDEN + EMC_AR2PDEN + EMC_RW2PDEN + EMC_TXSR + EMC_TXSRDLL + EMC_TCKE + EMC_TCKESR + EMC_TPD + EMC_TFAW + EMC_TRPAB + EMC_TCLKSTABLE + EMC_TCLKSTOP + EMC_TREFBW + EMC_FBIO_CFG6 + EMC_ODT_WRITE + EMC_ODT_READ + EMC_FBIO_CFG5 + EMC_CFG_DIG_DLL + EMC_CFG_DIG_DLL_PERIOD + EMC_DLL_XFORM_DQS0 + EMC_DLL_XFORM_DQS1 + EMC_DLL_XFORM_DQS2 + EMC_DLL_XFORM_DQS3 + EMC_DLL_XFORM_DQS4 + EMC_DLL_XFORM_DQS5 + EMC_DLL_XFORM_DQS6 + EMC_DLL_XFORM_DQS7 + EMC_DLL_XFORM_DQS8 + EMC_DLL_XFORM_DQS9 + EMC_DLL_XFORM_DQS10 + EMC_DLL_XFORM_DQS11 + EMC_DLL_XFORM_DQS12 + EMC_DLL_XFORM_DQS13 + EMC_DLL_XFORM_DQS14 + EMC_DLL_XFORM_DQS15 + EMC_DLL_XFORM_QUSE0 + EMC_DLL_XFORM_QUSE1 + EMC_DLL_XFORM_QUSE2 + EMC_DLL_XFORM_QUSE3 + EMC_DLL_XFORM_QUSE4 + EMC_DLL_XFORM_QUSE5 + EMC_DLL_XFORM_QUSE6 + EMC_DLL_XFORM_QUSE7 + EMC_DLL_XFORM_ADDR0 + EMC_DLL_XFORM_ADDR1 + EMC_DLL_XFORM_ADDR2 + EMC_DLL_XFORM_ADDR3 + EMC_DLL_XFORM_ADDR4 + EMC_DLL_XFORM_ADDR5 + EMC_DLL_XFORM_QUSE8 + EMC_DLL_XFORM_QUSE9 + EMC_DLL_XFORM_QUSE10 + EMC_DLL_XFORM_QUSE11 + EMC_DLL_XFORM_QUSE12 + EMC_DLL_XFORM_QUSE13 + EMC_DLL_XFORM_QUSE14 + EMC_DLL_XFORM_QUSE15 + EMC_DLI_TRIM_TXDQS0 + EMC_DLI_TRIM_TXDQS1 + EMC_DLI_TRIM_TXDQS2 + EMC_DLI_TRIM_TXDQS3 + EMC_DLI_TRIM_TXDQS4 + EMC_DLI_TRIM_TXDQS5 + EMC_DLI_TRIM_TXDQS6 + EMC_DLI_TRIM_TXDQS7 + EMC_DLI_TRIM_TXDQS8 + EMC_DLI_TRIM_TXDQS9 + EMC_DLI_TRIM_TXDQS10 + EMC_DLI_TRIM_TXDQS11 + EMC_DLI_TRIM_TXDQS12 + EMC_DLI_TRIM_TXDQS13 + EMC_DLI_TRIM_TXDQS14 + EMC_DLI_TRIM_TXDQS15 + EMC_DLL_XFORM_DQ0 + EMC_DLL_XFORM_DQ1 + EMC_DLL_XFORM_DQ2 + EMC_DLL_XFORM_DQ3 + EMC_DLL_XFORM_DQ4 + EMC_DLL_XFORM_DQ5 + EMC_DLL_XFORM_DQ6 + EMC_DLL_XFORM_DQ7 + EMC_XM2CMDPADCTRL + EMC_XM2CMDPADCTRL4 + EMC_XM2CMDPADCTRL5 + EMC_XM2DQPADCTRL2 + EMC_XM2DQPADCTRL3 + EMC_XM2CLKPADCTRL + EMC_XM2CLKPADCTRL2 + EMC_XM2COMPPADCTRL + EMC_XM2VTTGENPADCTRL + EMC_XM2VTTGENPADCTRL2 + EMC_XM2VTTGENPADCTRL3 + EMC_XM2DQSPADCTRL3 + EMC_XM2DQSPADCTRL4 + EMC_XM2DQSPADCTRL5 + EMC_XM2DQSPADCTRL6 + EMC_DSR_VTTGEN_DRV + EMC_TXDSRVTTGEN + EMC_FBIO_SPARE + EMC_ZCAL_WAIT_CNT + EMC_MRS_WAIT_CNT2 + EMC_CTT + EMC_CTT_DURATION + EMC_CFG_PIPE + EMC_DYN_SELF_REF_CONTROL + EMC_QPOP + +Example SoC include file: + +/ { + emc@0,7001b000 { + compatible = "nvidia,tegra124-emc"; + reg = <0x0 0x7001b000 0x0 0x1000>; + + nvidia,memory-controller = <&mc>; + }; +}; + +Example board file: + +/ { + emc@0,7001b000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000003 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000e0e /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/kernel/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 938f8e1ba..0db60470e 100644 --- a/kernel/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/kernel/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -8,6 +8,7 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> is the IP revision of the specific EMIF instance. + For am437x should be ti,emif-am4372. - phy-type : <u32> indicating the DDR phy type. Following are the allowed values diff --git a/kernel/Documentation/devicetree/bindings/mfd/arizona.txt b/kernel/Documentation/devicetree/bindings/mfd/arizona.txt index 7665aa959..18be0cbfb 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/arizona.txt @@ -10,6 +10,9 @@ Required properties: "wlf,wm5110" "wlf,wm8280" "wlf,wm8997" + "wlf,wm8998" + "wlf,wm1814" + - reg : I2C slave address when connected using I2C, chip select number when using SPI. @@ -31,17 +34,16 @@ Required properties: as covered in Documentation/devicetree/bindings/regulator/regulator.txt - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102, - wm5110, wm8280) + wm5110, wm8280, wm8998, wm1814) - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102, - wm5110, wm8280) + wm5110, wm8280, wm8998, wm1814) - SPKVDD-supply : Speaker driver power supply (wm8997) Optional properties: - wlf,reset : GPIO specifier for the GPIO controlling /RESET - - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA - wlf,gpio-defaults : A list of GPIO configuration register values. Defines for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If @@ -53,8 +55,10 @@ Optional properties: of input signals. Valid values are 0 (Differential), 1 (Single-ended) and 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. If present, values must be specified less than or equal to the number of - input singals. If values less than the number of input signals, elements - that has not been specifed are set to 0 by default. + input signals. If values less than the number of input signals, elements + that have not been specified are set to 0 by default. Entries are: + <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) + <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) - wlf,dmic-ref : DMIC reference voltage source for each input, can be selected from either MICVDD or one of the MICBIAS's, defines @@ -66,11 +70,9 @@ Optional properties: they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt -Optional subnodes: - - ldo1 : Initial data for the LDO1 regulator, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt - - micvdd : Initial data for the MICVDD regulator, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt +Also see child specific device properties: + Regulator - ../regulator/arizona-regulator.txt + Extcon - ../extcon/extcon-arizona.txt Example: diff --git a/kernel/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/kernel/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt new file mode 100644 index 000000000..692300117 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt @@ -0,0 +1,63 @@ +* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) + +The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C +controller and an USART. Only one function can be used at a time and is chosen +at boot time according to the device tree. + +Required properties: +- compatible: Should be "atmel,sama5d2-flexcom" +- reg: Should be the offset/length value for Flexcom dedicated + I/O registers (without USART, TWI or SPI registers). +- clocks: Should be the Flexcom peripheral clock from PMC. +- #address-cells: Should be <1> +- #size-cells: Should be <1> +- ranges: Should be one range for the full I/O register region + (including USART, TWI and SPI registers). +- atmel,flexcom-mode: Should be one of the following values: + - <1> for USART + - <2> for SPI + - <3> for I2C + +Required child: +A single available child device of type matching the "atmel,flexcom-mode" +property. + +The phandle provided by the clocks property of the child is the same as one for +the Flexcom parent. + +For other properties, please refer to the documentations of the respective +device: +- ../serial/atmel-usart.txt +- ../spi/spi_atmel.txt +- ../i2c/i2c-at91.txt + +Example: + +flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + + spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flx0_default>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&flx0_clk>; + clock-names = "spi_clk"; + atmel,fifo-size = <32>; + + mtd_dataflash@0 { + compatible = "atmel,at25f512b"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/kernel/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt index f64de95a8..670831b29 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt @@ -2,7 +2,11 @@ Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver Required properties: - compatible: value should be one of the following: + "atmel,at91sam9n12-hlcdc" + "atmel,at91sam9x5-hlcdc" + "atmel,sama5d2-hlcdc" "atmel,sama5d3-hlcdc" + "atmel,sama5d4-hlcdc" - reg: base address and size of the HLCDC device registers. - clock-names: the name of the 3 clocks requested by the HLCDC device. Should contain "periph_clk", "sys_clk" and "slow_clk". @@ -11,7 +15,7 @@ Required properties: The HLCDC IP exposes two subdevices: - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt - - a Display Controller: see ../drm/atmel-hlcdc-dc.txt + - a Display Controller: see ../display/atmel-hlcdc-dc.txt Example: diff --git a/kernel/Documentation/devicetree/bindings/mfd/axp20x.txt b/kernel/Documentation/devicetree/bindings/mfd/axp20x.txt index 98685f291..a474359dd 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/axp20x.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/axp20x.txt @@ -1,15 +1,18 @@ -AXP202/AXP209 device tree bindings +AXP family PMIC device tree bindings The axp20x family current members : +axp152 (X-Powers) axp202 (X-Powers) axp209 (X-Powers) +axp221 (X-Powers) Required properties: -- compatible: "x-powers,axp202" or "x-powers,axp209" +- compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209", + "x-powers,axp221" - reg: The I2C slave address for the AXP chip - interrupt-parent: The parent interrupt controller - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin -- interrupt-controller: axp20x has its own internal IRQs +- interrupt-controller: The PMIC has its own internal IRQs - #interrupt-cells: Should be set to 1 Optional properties: @@ -48,6 +51,31 @@ LDO3 : LDO : ldo3in-supply LDO4 : LDO : ldo24in-supply : shared supply LDO5 : LDO : ldo5in-supply +AXP221 regulators, type, and corresponding input supply names: + +Regulator Type Supply Name Notes +--------- ---- ----------- ----- +DCDC1 : DC-DC buck : vin1-supply +DCDC2 : DC-DC buck : vin2-supply +DCDC3 : DC-DC buck : vin3-supply +DCDC4 : DC-DC buck : vin4-supply +DCDC5 : DC-DC buck : vin5-supply +DC1SW : On/Off Switch : : DCDC1 secondary output +DC5LDO : LDO : : input from DCDC5 +ALDO1 : LDO : aldoin-supply : shared supply +ALDO2 : LDO : aldoin-supply : shared supply +ALDO3 : LDO : aldoin-supply : shared supply +DLDO1 : LDO : dldoin-supply : shared supply +DLDO2 : LDO : dldoin-supply : shared supply +DLDO3 : LDO : dldoin-supply : shared supply +DLDO4 : LDO : dldoin-supply : shared supply +ELDO1 : LDO : eldoin-supply : shared supply +ELDO2 : LDO : eldoin-supply : shared supply +ELDO3 : LDO : eldoin-supply : shared supply +LDO_IO0 : LDO : ips-supply : GPIO 0 +LDO_IO1 : LDO : ips-supply : GPIO 1 +RTC_LDO : LDO : ips-supply : always on + Example: axp209: pmic@34 { diff --git a/kernel/Documentation/devicetree/bindings/mfd/cros-ec.txt b/kernel/Documentation/devicetree/bindings/mfd/cros-ec.txt index 8009c3d87..136e0c2da 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -18,6 +18,10 @@ Required properties (SPI): - reg: SPI chip select Optional properties (SPI): +- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little + time to wake up from sleep before they can receive SPI transfers at a high + clock rate. This property specifies the delay, in usecs, between the + assertion of the CS to the start of the first clock pulse. - google,cros-ec-spi-msg-delay: Some implementations of the EC require some additional processing time in order to accept new transactions. If the delay between transactions is not long enough the EC may not be able to respond @@ -30,6 +34,10 @@ Required properties (LPC): - compatible: "google,cros-ec-lpc" - reg: List of (IO address, size) pairs defining the interface uses +Optional properties (all): +- google,has-vbc-nvram: Some implementations of the EC include a small + nvram space used to store verified boot context data. This boolean flag + is used to specify whether this nvram is present or not. Example for I2C: diff --git a/kernel/Documentation/devicetree/bindings/mfd/da9062.txt b/kernel/Documentation/devicetree/bindings/mfd/da9062.txt new file mode 100644 index 000000000..38802b54d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mfd/da9062.txt @@ -0,0 +1,88 @@ +* Dialog DA9062 Power Management Integrated Circuit (PMIC) + +DA9062 consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +da9062-regulator : : LDOs & BUCKs +da9062-rtc : : Real-Time Clock +da9062-watchdog : : Watchdog Timer + +====== + +Required properties: + +- compatible : Should be "dlg,da9062". +- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be + modified to match the chip's OTP settings). +- interrupt-parent : Specifies the reference to the interrupt controller for + the DA9062. +- interrupts : IRQ line information. +- interrupt-controller + +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for +further information on IRQ bindings. + +Sub-nodes: + +- regulators : This node defines the settings for the LDOs and BUCKs. The + DA9062 regulators are bound using their names listed below: + + buck1 : BUCK_1 + buck2 : BUCK_2 + buck3 : BUCK_3 + buck4 : BUCK_4 + ldo1 : LDO_1 + ldo2 : LDO_2 + ldo3 : LDO_3 + ldo4 : LDO_4 + + The component follows the standard regulator framework and the bindings + details of individual regulator device can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + + +- rtc : This node defines settings required for the Real-Time Clock associated + with the DA9062. There are currently no entries in this binding, however + compatible = "dlg,da9062-rtc" should be added if a node is created. + +- watchdog: This node defines the settings for the watchdog driver associated + with the DA9062 PMIC. The compatible = "dlg,da9062-watchdog" should be added + if a node is created. + + +Example: + + pmic0: da9062@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + rtc { + compatible = "dlg,da9062-rtc"; + }; + + watchdog { + compatible = "dlg,da9062-watchdog"; + }; + + regulators { + DA9062_BUCK1: buck1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <2000000>; + regulator-boot-on; + }; + DA9062_LDO1: ldo1 { + regulator-name = "LDO_1"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3600000>; + regulator-boot-on; + }; + }; + }; + diff --git a/kernel/Documentation/devicetree/bindings/mfd/da9063.txt b/kernel/Documentation/devicetree/bindings/mfd/da9063.txt index 42c6fa6f1..05b21bcb8 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/da9063.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/da9063.txt @@ -5,6 +5,7 @@ DA9093 consists of a large and varied group of sub-devices (I2C Only): Device Supply Names Description ------ ------------ ----------- da9063-regulator : : LDOs & BUCKs +da9063-onkey : : On Key da9063-rtc : : Real-Time Clock da9063-watchdog : : Watchdog @@ -51,6 +52,18 @@ Sub-nodes: the DA9063. There are currently no entries in this binding, however compatible = "dlg,da9063-rtc" should be added if a node is created. +- onkey : This node defines the OnKey settings for controlling the key + functionality of the device. The node should contain the compatible property + with the value "dlg,da9063-onkey". + + Optional onkey properties: + + - dlg,disable-key-power : Disable power-down using a long key-press. If this + entry exists the OnKey driver will remove support for the KEY_POWER key + press. If this entry does not exist then by default the key-press + triggered power down is enabled and the OnKey will support both KEY_POWER + and KEY_SLEEP. + - watchdog : This node defines settings for the Watchdog timer associated with the DA9063. There are currently no entries in this binding, however compatible = "dlg,da9063-watchdog" should be added if a node is created. @@ -73,6 +86,11 @@ Example: compatible = "dlg,da9063-watchdog"; }; + onkey { + compatible = "dlg,da9063-onkey"; + dlg,disable-key-power; + }; + regulators { DA9063_BCORE1: bcore1 { regulator-name = "BCORE1"; diff --git a/kernel/Documentation/devicetree/bindings/mfd/da9150.txt b/kernel/Documentation/devicetree/bindings/mfd/da9150.txt index d0588eaa0..fd4dca7f4 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/da9150.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/da9150.txt @@ -6,6 +6,7 @@ Device Description ------ ----------- da9150-gpadc : General Purpose ADC da9150-charger : Battery Charger +da9150-fg : Battery Fuel-Gauge ====== @@ -16,13 +17,13 @@ Required properties: the IRQs from da9150 are delivered to. - interrupts: IRQ line info for da9150 chip. - interrupt-controller: da9150 has internal IRQs (own IRQ domain). - (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for + (See ../interrupt-controller/interrupts.txt for further information relating to interrupt properties) Sub-devices: -- da9150-gpadc: See Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt -- da9150-charger: See Documentation/devicetree/bindings/power/da9150-charger.txt - +- da9150-gpadc: See ../iio/adc/da9150-gpadc.txt +- da9150-charger: See ../power/da9150-charger.txt +- da9150-fg: See ../power/da9150-fg.txt Example: @@ -34,10 +35,28 @@ Example: interrupt-controller; gpadc: da9150-gpadc { - ... + compatible = "dlg,da9150-gpadc"; + #io-channel-cells = <1>; + }; + + charger { + compatible = "dlg,da9150-charger"; + + io-channels = <&gpadc 0>, + <&gpadc 2>, + <&gpadc 8>, + <&gpadc 5>; + io-channel-names = "CHAN_IBUS", + "CHAN_VBUS", + "CHAN_TJUNC", + "CHAN_VBAT"; }; - da9150-charger { - ... + fuel-gauge { + compatible = "dlg,da9150-fuel-gauge"; + + dlg,update-interval = <10000>; + dlg,warn-soc-level = /bits/ 8 <15>; + dlg,crit-soc-level = /bits/ 8 <5> }; }; diff --git a/kernel/Documentation/devicetree/bindings/mfd/max77686.txt b/kernel/Documentation/devicetree/bindings/mfd/max77686.txt index e39f0bc1f..741e76688 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/max77686.txt @@ -1,14 +1,15 @@ Maxim MAX77686 multi-function device -MAX77686 is a Mulitifunction device with PMIC, RTC and Charger on chip. It is +MAX77686 is a Multifunction device with PMIC, RTC and Charger on chip. It is interfaced to host controller using i2c interface. PMIC and Charger submodules are addressed using same i2c slave address whereas RTC submodule uses different i2c slave address,presently for which we are statically creating i2c client while probing.This document describes the binding for mfd device and PMIC submodule. -Binding for the built-in 32k clock generator block is defined separately -in bindings/clk/maxim,max77686.txt file. +Bindings for the built-in 32k clock generator block and +regulators are defined in ../clk/maxim,max77686.txt and +../regulator/max77686.txt respectively. Required properties: - compatible : Must be "maxim,max77686"; @@ -16,67 +17,11 @@ Required properties: - interrupts : This i2c device has an IRQ line connected to the main SoC. - interrupt-parent : The parent interrupt controller. -Optional node: -- voltage-regulators : The regulators of max77686 have to be instantiated - under subnode named "voltage-regulators" using the following format. - - regulator_name { - regulator-compatible = LDOn/BUCKn - standard regulator constraints.... - }; - refer Documentation/devicetree/bindings/regulator/regulator.txt - - The regulator-compatible property of regulator should initialized with string -to get matched with their hardware counterparts as follow: - - -LDOn : for LDOs, where n can lie in range 1 to 26. - example: LDO1, LDO2, LDO26. - -BUCKn : for BUCKs, where n can lie in range 1 to 9. - example: BUCK1, BUCK5, BUCK9. - - Regulators which can be turned off during system suspend: - -LDOn : 2, 6-8, 10-12, 14-16, - -BUCKn : 1-4. - Use standard regulator bindings for it ('regulator-off-in-suspend'). - - LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable - control. To turn this feature on this property must be added to the regulator - sub-node: - - maxim,ena-gpios : one GPIO specifier enable control (the gpio - flags are actually ignored and always - ACTIVE_HIGH is used) - Example: - max77686@09 { + max77686: pmic@09 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; reg = <0x09>; - - voltage-regulators { - ldo11_reg { - regulator-compatible = "LDO11"; - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1900000>; - regulator-max-microvolt = <1900000>; - regulator-always-on; - }; - - buck1_reg { - regulator-compatible = "BUCK1"; - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck9_reg { - regulator-compatible = "BUCK9"; - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1200000>; - maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; - }; - } + }; diff --git a/kernel/Documentation/devicetree/bindings/mfd/max77693.txt b/kernel/Documentation/devicetree/bindings/mfd/max77693.txt index 38e64405e..d3425846a 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/max77693.txt @@ -76,7 +76,60 @@ Optional properties: Valid values: 4300000, 4700000, 4800000, 4900000 Default: 4300000 +- led : the LED submodule device node + +There are two LED outputs available - FLED1 and FLED2. Each of them can +control a separate LED or they can be connected together to double +the maximum current for a single connected LED. One LED is represented +by one child node. + +Required properties: +- compatible : Must be "maxim,max77693-led". + +Optional properties: +- maxim,boost-mode : + In boost mode the device can produce up to 1.2A of total current + on both outputs. The maximum current on each output is reduced + to 625mA then. If not enabled explicitly, boost setting defaults to + LEDS_BOOST_FIXED in case both current sources are used. + Possible values: + LEDS_BOOST_OFF (0) - no boost, + LEDS_BOOST_ADAPTIVE (1) - adaptive mode, + LEDS_BOOST_FIXED (2) - fixed mode. +- maxim,boost-mvout : Output voltage of the boost module in millivolts. + Valid values: 3300 - 5500, step by 25 (rounded down) + Default: 3300 +- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired + if chip estimates that system voltage could drop below this level due + to flash power consumption. + Valid values: 2400 - 3400, step by 33 (rounded down) + Default: 2400 + +Required properties for the LED child node: +- led-sources : see Documentation/devicetree/bindings/leds/common.txt; + device current output identifiers: 0 - FLED1, 1 - FLED2 +- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt + Valid values for a LED connected to one FLED output: + 15625 - 250000, step by 15625 (rounded down) + Valid values for a LED connected to both FLED outputs: + 15625 - 500000, step by 15625 (rounded down) +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt + Valid values for a single LED connected to one FLED output + (boost mode must be turned off): + 15625 - 1000000, step by 15625 (rounded down) + Valid values for a single LED connected to both FLED outputs: + 15625 - 1250000, step by 15625 (rounded down) + Valid values for two LEDs case: + 15625 - 625000, step by 15625 (rounded down) +- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt + Valid values: 62500 - 1000000, step by 62500 (rounded down) + +Optional properties for the LED child node: +- label : see Documentation/devicetree/bindings/leds/common.txt + Example: +#include <dt-bindings/leds/common.h> + max77693@66 { compatible = "maxim,max77693"; reg = <0x66>; @@ -117,5 +170,19 @@ Example: maxim,thermal-regulation-celsius = <75>; maxim,battery-overcurrent-microamp = <3000000>; maxim,charge-input-threshold-microvolt = <4300000>; + + led { + compatible = "maxim,max77693-led"; + maxim,boost-mode = <LEDS_BOOST_FIXED>; + maxim,boost-mvout = <5000>; + maxim,mvsys-min = <2400>; + + camera_flash: flash-led { + label = "max77693-flash"; + led-sources = <0>, <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1250000>; + flash-max-timeout-us = <1000000>; + }; }; }; diff --git a/kernel/Documentation/devicetree/bindings/mfd/max77802.txt b/kernel/Documentation/devicetree/bindings/mfd/max77802.txt new file mode 100644 index 000000000..51fc1a60c --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mfd/max77802.txt @@ -0,0 +1,26 @@ +Maxim MAX77802 multi-function device + +The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high +efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power +up application processors and peripherals, a 2-channel 32kHz clock outputs, +a Real-Time-Clock (RTC) and a I2C interface to program the individual +regulators, clocks outputs and the RTC. + +Bindings for the built-in 32k clock generator block and +regulators are defined in ../clk/maxim,max77802.txt and +../regulator/max77802.txt respectively. + +Required properties: +- compatible : Must be "maxim,max77802" +- reg : Specifies the I2C slave address of PMIC block. +- interrupts : I2C device IRQ line connected to the main SoC. +- interrupt-parent : The parent interrupt controller. + +Example: + + max77802: pmic@09 { + compatible = "maxim,max77802"; + interrupt-parent = <&intc>; + interrupts = <26 IRQ_TYPE_NONE>; + reg = <0x09>; + }; diff --git a/kernel/Documentation/devicetree/bindings/mfd/mfd.txt b/kernel/Documentation/devicetree/bindings/mfd/mfd.txt new file mode 100644 index 000000000..af9d6931a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mfd/mfd.txt @@ -0,0 +1,41 @@ +Multi-Function Devices (MFD) + +These devices comprise a nexus for heterogeneous hardware blocks containing +more than one non-unique yet varying hardware functionality. + +A typical MFD can be: + +- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management + Integrated Circuit) that is manufactured in a lower technology node (rough + silicon) that handles analog drivers for things like audio amplifiers, LED + drivers, level shifters, PHY (physical interfaces to things like USB or + ethernet), regulators etc. + +- A range of memory registers containing "miscellaneous system registers" also + known as a system controller "syscon" or any other memory range containing a + mix of unrelated hardware devices. + +Optional properties: + +- compatible : "simple-mfd" - this signifies that the operating system should + consider all subnodes of the MFD device as separate devices akin to how + "simple-bus" inidicates when to see subnodes as children for a simple + memory-mapped bus. For more complex devices, when the nexus driver has to + probe registers to figure out what child devices exist etc, this should not + be used. In the latter case the child devices will be determined by the + operating system. + +Example: + +foo@1000 { + compatible = "syscon", "simple-mfd"; + reg = <0x01000 0x1000>; + + led@08.0 { + compatible = "register-bit-led"; + offset = <0x08>; + mask = <0x01>; + label = "myled"; + default-state = "on"; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/mfd/rk808.txt b/kernel/Documentation/devicetree/bindings/mfd/rk808.txt index 9e6e2592e..4ca6aab42 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/rk808.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/rk808.txt @@ -24,6 +24,10 @@ Optional properties: - vcc10-supply: The input supply for LDO_REG6 - vcc11-supply: The input supply for LDO_REG8 - vcc12-supply: The input supply for SWITCH_REG2 +- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers + for 2 host gpio's used for dvs. The format of the gpio specifier depends in + the gpio controller. If DVS GPIOs aren't present, voltage changes will happen + very quickly with no slow ramp time. Regulators: All the regulators of RK808 to be instantiated shall be listed in a child node named 'regulators'. Each regulator is represented @@ -55,7 +59,9 @@ Example: interrupt-parent = <&gpio0>; interrupts = <4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; reg = <0x1b>; rockchip,system-power-controller; wakeup-source; diff --git a/kernel/Documentation/devicetree/bindings/mfd/s2mps11.txt b/kernel/Documentation/devicetree/bindings/mfd/s2mps11.txt index 57a045016..09b94c97f 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator +* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,17 +7,28 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic" - or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic". +- compatible: Should be one of the following + - "samsung,s2mps11-pmic" + - "samsung,s2mps13-pmic" + - "samsung,s2mps14-pmic" + - "samsung,s2mps15-pmic" + - "samsung,s2mpu02-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: - interrupt-parent: Specifies the phandle of the interrupt controller to which the interrupts from s2mps11 are delivered to. - interrupts: Interrupt specifiers for interrupt sources. +- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled + down. When the system is suspended it will always go down thus triggerring + unwanted buck warm reset (setting buck voltages to default values). +- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is + connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1 + register to turn off the power. Usually the ACOKB is pulled up to VBATT so + when PWRHOLD pin goes low, the rising ACOKB will trigger power off. Optional nodes: -- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768 +- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz outputs, so to register these as clocks with common clock framework instantiate a sub-node named "clocks". It uses the common clock binding documented in : @@ -30,12 +41,13 @@ Optional nodes: the clock which they consume. Clock ID Devices ---------------------------------------------------------- - 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767 - 32KhzCP 1 S2MPS11, S2MPS13, S5M8767 - 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767 + 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 + 32KhzCP 1 S2MPS11, S2MPS13, S2MPS15, S5M8767 + 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767 - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk", "samsung,s2mps14-clk", "samsung,s5m8767-clk" + The s2msp15 uses the same compatible as s2mps13, as both provides similar clocks. - regulators: The regulators of s2mps11 that have to be instantiated should be included in a sub-node named 'regulators'. Regulator nodes included in this @@ -83,6 +95,7 @@ as per the datasheet of s2mps11. - S2MPS11: 1 to 38 - S2MPS13: 1 to 40 - S2MPS14: 1 to 25 + - S2MPS15: 1 to 27 - S2MPU02: 1 to 28 - Example: LDO1, LDO2, LDO28 - BUCKn @@ -90,6 +103,7 @@ as per the datasheet of s2mps11. - S2MPS11: 1 to 10 - S2MPS13: 1 to 10 - S2MPS14: 1 to 5 + - S2MPS15: 1 to 10 - S2MPU02: 1 to 7 - Example: BUCK1, BUCK2, BUCK9 diff --git a/kernel/Documentation/devicetree/bindings/mfd/sky81452.txt b/kernel/Documentation/devicetree/bindings/mfd/sky81452.txt index 35181794a..511764acd 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/sky81452.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/sky81452.txt @@ -6,7 +6,7 @@ Required properties: Required child nodes: - backlight : container node for backlight following the binding - in video/backlight/sky81452-backlight.txt + in leds/backlight/sky81452-backlight.txt - regulator : container node for regulators following the binding in regulator/sky81452-regulator.txt diff --git a/kernel/Documentation/devicetree/bindings/mfd/tc3589x.txt b/kernel/Documentation/devicetree/bindings/mfd/tc3589x.txt index 6fcedba46..23fc2f21f 100644 --- a/kernel/Documentation/devicetree/bindings/mfd/tc3589x.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/tc3589x.txt @@ -55,7 +55,8 @@ Optional nodes: - linux,keymap: the definition can be found in bindings/input/matrix-keymap.txt - linux,no-autorepeat: do no enable autorepeat feature. - - linux,wakeup: use any event on keypad as wakeup event. + - wakeup-source: use any event on keypad as wakeup event. + (Legacy property supported: "linux,wakeup") Example: @@ -84,7 +85,6 @@ tc35893@44 { keypad,num-columns = <8>; keypad,num-rows = <8>; linux,no-autorepeat; - linux,wakeup; linux,keymap = <0x0301006b 0x04010066 0x06040072 @@ -103,5 +103,6 @@ tc35893@44 { 0x01030039 0x07060069 0x050500d9>; + wakeup-source; }; }; diff --git a/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt b/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt index 8fffa3c5e..8fffa3c5e 100755..100644 --- a/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt +++ b/kernel/Documentation/devicetree/bindings/mfd/tps6507x.txt diff --git a/kernel/Documentation/devicetree/bindings/mips/ath79-soc.txt b/kernel/Documentation/devicetree/bindings/mips/ath79-soc.txt new file mode 100644 index 000000000..88a12a43e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mips/ath79-soc.txt @@ -0,0 +1,21 @@ +Binding for Qualcomm Atheros AR7xxx/AR9XXX SoC + +Each device tree must specify a compatible value for the AR SoC +it uses in the compatible property of the root node. The compatible +value must be one of the following values: + +- qca,ar7130 +- qca,ar7141 +- qca,ar7161 +- qca,ar7240 +- qca,ar7241 +- qca,ar7242 +- qca,ar9130 +- qca,ar9132 +- qca,ar9330 +- qca,ar9331 +- qca,ar9341 +- qca,ar9342 +- qca,ar9344 +- qca,qca9556 +- qca,qca9558 diff --git a/kernel/Documentation/devicetree/bindings/mips/img/xilfpga.txt b/kernel/Documentation/devicetree/bindings/mips/img/xilfpga.txt new file mode 100644 index 000000000..57e7ee942 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mips/img/xilfpga.txt @@ -0,0 +1,83 @@ +Imagination University Program MIPSfpga +======================================= + +Under the Imagination University Program, a microAptiv UP core has been +released for academic usage. + +As we are dealing with a MIPS core instantiated on an FPGA, specifications +are fluid and can be varied in RTL. + +This binding document is provided as baseline guidance for the example +project provided by IMG. + +The example project runs on the Nexys4DDR board by Digilent powered by +the ARTIX-7 FPGA by Xilinx. + +Relevant details about the example project and the Nexys4DDR board: + +- microAptiv UP core m14Kc +- 50MHz clock speed +- 128Mbyte DDR RAM at 0x0000_0000 +- 8Kbyte RAM at 0x1000_0000 +- axi_intc at 0x1020_0000 +- axi_uart16550 at 0x1040_0000 +- axi_gpio at 0x1060_0000 +- axi_i2c at 0x10A0_0000 +- custom_gpio at 0x10C0_0000 +- axi_ethernetlite at 0x10E0_0000 +- 8Kbyte BootRAM at 0x1FC0_0000 + +Required properties: +-------------------- + - compatible: Must include "digilent,nexys4ddr","img,xilfpga". + +CPU nodes: +---------- +A "cpus" node is required. Required properties: + - #address-cells: Must be 1. + - #size-cells: Must be 0. +A CPU sub-node is also required for at least CPU 0. Required properties: + - device_type: Must be "cpu". + - compatible: Must be "mips,m14Kc". + - reg: Must be <0>. + - clocks: phandle to ext clock for fixed-clock received by MIPS core. + +Example: + + compatible = "img,xilfpga","digilent,nexys4ddr"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "mips,m14Kc"; + reg = <0>; + clocks = <&ext>; + }; + }; + + ext: ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + +Boot protocol: +-------------- + +The BootRAM is a writeable "RAM" in FPGA at 0x1FC0_0000. +This is for easy reprogrammibility via JTAG. + +The BootRAM initializes the cache and the axi_uart peripheral. + +DDR initialization is already handled by a HW IP block. + +When the example project bitstream is loaded, the cpu_reset button +needs to be pressed. + +The bootram initializes the cache and axi_uart. +Then outputs MIPSFPGA\n\r on the serial port on the Nexys4DDR board. + +At this point, the board is ready to load the Linux kernel +vmlinux file via JTAG. diff --git a/kernel/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/kernel/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt index 47b205cc9..4556359c5 100644 --- a/kernel/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt +++ b/kernel/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt @@ -10,3 +10,5 @@ Required properties: The second entry gives the physical address and length of the registers indicating the strapping options. +Optional properties: +- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit). diff --git a/kernel/Documentation/devicetree/bindings/misc/sram.txt b/kernel/Documentation/devicetree/bindings/misc/sram.txt index 36cbe5aea..42ee9438b 100644 --- a/kernel/Documentation/devicetree/bindings/misc/sram.txt +++ b/kernel/Documentation/devicetree/bindings/misc/sram.txt @@ -33,6 +33,12 @@ Optional properties in the area nodes: - compatible : standard definition, should contain a vendor specific string in the form <vendor>,[<device>-]<usage> +- pool : indicates that the particular reserved SRAM area is addressable + and in use by another device or devices +- export : indicates that the reserved SRAM area may be accessed outside + of the kernel, e.g. by bootloader or userspace +- label : the name for the reserved partition, if omitted, the label + is taken from the node name excluding the unit address. Example: @@ -48,4 +54,14 @@ sram: sram@5c000000 { compatible = "socvendor,smp-sram"; reg = <0x100 0x50>; }; + + device-sram@1000 { + reg = <0x1000 0x1000>; + pool; + }; + + exported@20000 { + reg = <0x20000 0x20000>; + export; + }; }; diff --git a/kernel/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/kernel/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt index 98ee2abbe..da541c363 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt @@ -8,7 +8,8 @@ Device Tree Bindings for the Arasan SDHCI Controller [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Required Properties: - - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' + - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a' or + 'arasan,sdhci-4.9a' or 'arasan,sdhci-5.1' - reg: From mmc bindings: Register location and length. - clocks: From clock bindings: Handles to clock inputs. - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb" diff --git a/kernel/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/kernel/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt index b7943f3f9..dedfb02c7 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -22,6 +22,8 @@ Optional properties: - voltage-ranges : two cells are required, first cell specifies minimum slot voltage (mV), second cell specifies maximum slot voltage (mV). Several ranges could be specified. + - little-endian : If the host controller is little-endian mode, specify + this property. The default endian mode is big-endian. Example: diff --git a/kernel/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/kernel/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 415c5575c..dca56d624 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -7,10 +7,17 @@ This file documents differences between the core properties described by mmc.txt and the properties used by the sdhci-esdhc-imx driver. Required properties: -- compatible : Should be "fsl,<chip>-esdhc" +- compatible : Should be "fsl,<chip>-esdhc", the supported chips include + "fsl,imx25-esdhc" + "fsl,imx35-esdhc" + "fsl,imx51-esdhc" + "fsl,imx53-esdhc" + "fsl,imx6q-usdhc" + "fsl,imx6sl-usdhc" + "fsl,imx6sx-usdhc" + "fsl,imx7d-usdhc" Optional properties: -- fsl,cd-controller : Indicate to use controller internal card detection - fsl,wp-controller : Indicate to use controller internal write protection - fsl,delay-line : Specify the number of delay cells for override mode. This is used to set the clock delay for DLL(Delay Line) on override mode @@ -21,6 +28,11 @@ Optional properties: transparent level shifters on the outputs of the controller. Two cells are required, first cell specifies minimum slot voltage (mV), second cell specifies maximum slot voltage (mV). Several ranges could be specified. +- fsl,tuning-step: Specify the increasing delay cell steps in tuning procedure. + The uSDHC use one delay cell as default increasing step to do tuning process. + This property allows user to change the tuning step to more than one delay + cells which is useful for some special boards or cards when the default + tuning step can't find the proper delay window within limited tuning retries. Examples: @@ -28,7 +40,6 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-controller; fsl,wp-controller; }; diff --git a/kernel/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/kernel/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt index 3b3544931..df370585c 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -13,6 +13,10 @@ Required Properties: * compatible: should be one of the following. - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions. + - "hisilicon,hi6220-dw-mshc": for controllers with hi6220 specific extensions. + +Optional Properties: +- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral. Example: @@ -42,3 +46,27 @@ Example: cap-mmc-highspeed; cap-sd-highspeed; }; + + /* for Hi6220 */ + + dwmmc_1: dwmmc1@f723e000 { + compatible = "hisilicon,hi6220-dw-mshc"; + num-slots = <0x1>; + bus-width = <0x4>; + disable-wp; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + card-detect-delay = <200>; + hisilicon,peripheral-syscon = <&ao_ctrl>; + reg = <0x0 0xf723e000 0x0 0x1000>; + interrupts = <0x0 0x49 0x4>; + clocks = <&clock_sys HI6220_MMC1_CIUCLK>, <&clock_sys HI6220_MMC1_CLK>; + clock-names = "ciu", "biu"; + cd-gpios = <&gpio1 0 1>; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>; + pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>; + vqmmc-supply = <&ldo7>; + vmmc-supply = <&ldo10>; + }; diff --git a/kernel/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/kernel/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt index a462c50f1..ce0e76749 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -21,5 +21,7 @@ Example: sdhci0_pwrseq { compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio1 12 0>; + reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + clocks = <&clk_32768_ck>; + clock-names = "ext_clock"; } diff --git a/kernel/Documentation/devicetree/bindings/mmc/mmc.txt b/kernel/Documentation/devicetree/bindings/mmc/mmc.txt index 438899e88..ed23b9bed 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/mmc.txt @@ -21,6 +21,11 @@ Optional properties: below for the case, when a GPIO is used for the CD line - wp-inverted: when present, polarity on the WP line is inverted. See the note below for the case, when a GPIO is used for the WP line +- disable-wp: When set no physical WP line is present. This property should + only be specified when the controller has a dedicated write-protect + detection logic. If a GPIO is always used for the write-protect detection + logic it is sufficient to not specify wp-gpios property in the absence of a WP + line. - max-frequency: maximum operating clock frequency - no-1-8-v: when present, denotes that 1.8v card voltage is not supported on this system, even if the controller claims it is. @@ -32,6 +37,7 @@ Optional properties: - sd-uhs-sdr104: SD UHS SDR104 speed is supported - sd-uhs-ddr50: SD UHS DDR50 speed is supported - cap-power-off-card: powering off the card is safe +- cap-mmc-hw-reset: eMMC hardware reset is supported - cap-sdio-irq: enable SDIO IRQ signalling on this interface - full-pwr-cycle: full power cycle of the card is supported - mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported @@ -62,7 +68,8 @@ polarity is in effect. Optional SDIO properties: - keep-power-in-suspend: Preserves card power during a suspend/resume cycle -- enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion +- wakeup-source: Enables wake up of host system on SDIO IRQ assertion + (Legacy property supported: "enable-sdio-wakeup") MMC power sequences: @@ -112,7 +119,7 @@ sdhci@ab000000 { wp-gpios = <&gpio 70 0>; max-frequency = <50000000>; keep-power-in-suspend; - enable-sdio-wakeup; + wakeup-source; mmc-pwrseq = <&sdhci0_pwrseq> } diff --git a/kernel/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/kernel/Documentation/devicetree/bindings/mmc/mtk-sd.txt new file mode 100644 index 000000000..0120c7f11 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -0,0 +1,41 @@ +* MTK MMC controller + +The MTK MSDC can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties in mmc.txt +and the properties used by the msdc driver. + +Required properties: +- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" +- interrupts: Should contain MSDC interrupt number +- clocks: MSDC source clock, HCLK +- clock-names: "source", "hclk" +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin ctrl +- pinctrl-1: should contain uhs mode pin ctrl +- vmmc-supply: power to the Core +- vqmmc-supply: power to the IO + +Optional properties: +- assigned-clocks: PLL of the source clock +- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock +- hs400-ds-delay: HS400 DS delay setting + +Examples: +mmc0: mmc@11230000 { + compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc"; + reg = <0 0x11230000 0 0x108>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>; + vmmc-supply = <&mt6397_vemc_3v3_reg>; + vqmmc-supply = <&mt6397_vio18_reg>; + clocks = <&pericfg CLK_PERI_MSDC30_0>, + <&topckgen CLK_TOP_MSDC50_0_H_SEL>; + clock-names = "source", "hclk"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + hs400-ds-delay = <0x14015>; +}; diff --git a/kernel/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/kernel/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt index 299081f94..cae29eb57 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt @@ -6,11 +6,12 @@ and the properties used by the MMCIF device. Required properties: -- compatible: must contain one of the following +- compatible: should be "renesas,mmcif-<soctype>", "renesas,sh-mmcif" as a + fallback. Examples with <soctype> are: - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs - - "renesas,sh-mmcif" for the generic MMCIF + - "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs - clocks: reference to the functional clock @@ -18,6 +19,8 @@ Required properties: dma-names property. - dma-names: must contain "tx" for the transmit DMA channel and "rx" for the receive DMA channel. +- max-frequency: Maximum operating clock frequency, driver uses default clock + frequency if it is not set. Example: R8A7790 (R-Car H2) MMCIF0 @@ -29,4 +32,5 @@ Example: R8A7790 (R-Car H2) MMCIF0 clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; dma-names = "tx", "rx"; + max-frequency = <97500000>; }; diff --git a/kernel/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/kernel/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt index c327c2d6f..3dc13b68f 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt @@ -14,6 +14,19 @@ Required Properties: before RK3288 - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 +Optional Properties: +* clocks: from common clock binding: if ciu_drive and ciu_sample are + specified in clock-names, should contain handles to these clocks. + +* clock-names: Apart from the clock-names described in synopsys-dw-mshc.txt + two more clocks "ciu-drive" and "ciu-sample" are supported. They are used + to control the clock phases, "ciu-sample" is required for tuning high- + speed modes. + +* rockchip,default-sample-phase: The default phase to set ciu_sample at + probing, low speeds or in case where all phases work at tuning time. + If not specified 0 deg will be used. + Example: rkdwmmc0@12200000 { diff --git a/kernel/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/kernel/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt new file mode 100644 index 000000000..1b662d717 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt @@ -0,0 +1,21 @@ +* Atmel SDHCI controller + +This file documents the differences between the core properties in +Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the +sdhci-of-at91 driver. + +Required properties: +- compatible: Must be "atmel,sama5d2-sdhci". +- clocks: Phandlers to the clocks. +- clock-names: Must be "hclock", "multclk", "baseclk"; + + +Example: + +sdmmc0: sdio-host@a0000000 { + compatible = "atmel,sama5d2-sdhci"; + reg = <0xa0000000 0x300>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; + clock-names = "hclock", "multclk", "baseclk"; +}; diff --git a/kernel/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/kernel/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 346c6095a..8636f5ae9 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -75,6 +75,12 @@ Optional properties: * vmmc-supply: The phandle to the regulator to use for vmmc. If this is specified we'll defer probe until we can find this regulator. +* dmas: List of DMA specifiers with the controller specific format as described + in the generic DMA client binding. Refer to dma.txt for details. + +* dma-names: request names for generic DMA client binding. Must be "rx-tx". + Refer to dma.txt for details. + Aliases: - All the MSHC controller nodes should be represented in the aliases node using @@ -95,6 +101,23 @@ board specific portions as listed below. #size-cells = <0>; }; +[board specific internal DMA resources] + + dwmmc0@12200000 { + clock-frequency = <400000000>; + clock-freq-min-max = <400000 200000000>; + num-slots = <1>; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + vmmc-supply = <&buck8>; + bus-width = <8>; + cap-mmc-highspeed; + cap-sd-highspeed; + }; + +[board specific generic DMA request binding] + dwmmc0@12200000 { clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; @@ -106,4 +129,6 @@ board specific portions as listed below. bus-width = <8>; cap-mmc-highspeed; cap-sd-highspeed; + dmas = <&pdma 12>; + dma-names = "rx-tx"; }; diff --git a/kernel/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/kernel/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 76bf087bc..74166a0d4 100644 --- a/kernel/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/kernel/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -102,7 +102,7 @@ not every application needs SDIO irq, e.g. MMC cards. pinctrl-1 = <&mmc1_idle>; pinctrl-2 = <&mmc1_sleep>; ... - interrupts-extended = <&intc 64 &gpio2 28 0>; + interrupts-extended = <&intc 64 &gpio2 28 GPIO_ACTIVE_LOW>; }; mmc1_idle : pinmux_cirq_pin { diff --git a/kernel/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt b/kernel/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt new file mode 100644 index 000000000..4ff7128ee --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt @@ -0,0 +1,150 @@ +* Broadcom STB NAND Controller + +The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND +flash chips. It has a memory-mapped register interface for both control +registers and for its data input/output buffer. On some SoCs, this controller is +paired with a custom DMA engine (inventively named "Flash DMA") which supports +basic PROGRAM and READ functions, among other features. + +This controller was originally designed for STB SoCs (BCM7xxx) but is now +available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and +iProc/Cygnus. Its history includes several similar (but not fully register +compatible) versions. + +Required properties: +- compatible : May contain an SoC-specific compatibility string (see below) + to account for any SoC-specific hardware bits that may be + added on top of the base core controller. + In addition, must contain compatibility information about + the core NAND controller, of the following form: + "brcm,brcmnand" and an appropriate version compatibility + string, like "brcm,brcmnand-v7.0" + Possible values: + brcm,brcmnand-v4.0 + brcm,brcmnand-v5.0 + brcm,brcmnand-v6.0 + brcm,brcmnand-v6.1 + brcm,brcmnand-v7.0 + brcm,brcmnand-v7.1 + brcm,brcmnand +- reg : the register start and length for NAND register region. + (optional) Flash DMA register range (if present) + (optional) NAND flash cache range (if at non-standard offset) +- reg-names : a list of the names corresponding to the previous register + ranges. Should contain "nand" and (optionally) + "flash-dma" and/or "nand-cache". +- interrupts : The NAND CTLRDY interrupt and (if Flash DMA is available) + FLASH_DMA_DONE +- interrupt-names : May be "nand_ctlrdy" or "flash_dma_done", if broken out as + individual interrupts. + May be "nand", if the SoC has the individual NAND + interrupts multiplexed behind another custom piece of + hardware +- interrupt-parent : See standard interrupt bindings +- #address-cells : <1> - subnodes give the chip-select number +- #size-cells : <0> + +Optional properties: +- brcm,nand-has-wp : Some versions of this IP include a write-protect + (WP) control bit. It is always available on >= + v7.0. Use this property to describe the rare + earlier versions of this core that include WP + + -- Additonal SoC-specific NAND controller properties -- + +The NAND controller is integrated differently on the variety of SoCs on which it +is found. Part of this integration involves providing status and enable bits +with which to control the 8 exposed NAND interrupts, as well as hardware for +configuring the endianness of the data bus. On some SoCs, these features are +handled via standard, modular components (e.g., their interrupts look like a +normal IRQ chip), but on others, they are controlled in unique and interesting +ways, sometimes with registers that lump multiple NAND-related functions +together. The former case can be described simply by the standard interrupts +properties in the main controller node. But for the latter exceptional cases, +we define additional 'compatible' properties and associated register resources within the NAND controller node above. + + - compatible: Can be one of several SoC-specific strings. Each SoC may have + different requirements for its additional properties, as described below each + bullet point below. + + * "brcm,nand-bcm63138" + - reg: (required) the 'NAND_INT_BASE' register range, with separate status + and enable registers + - reg-names: (required) "nand-int-base" + + * "brcm,nand-iproc" + - reg: (required) the "IDM" register range, for interrupt enable and APB + bus access endianness configuration, and the "EXT" register range, + for interrupt status/ack. + - reg-names: (required) a list of the names corresponding to the previous + register ranges. Should contain "iproc-idm" and "iproc-ext". + + +* NAND chip-select + +Each controller (compatible: "brcm,brcmnand") may contain one or more subnodes +to represent enabled chip-selects which (may) contain NAND flash chips. Their +properties are as follows. + +Required properties: +- compatible : should contain "brcm,nandcs" +- reg : a single integer representing the chip-select + number (e.g., 0, 1, 2, etc.) +- #address-cells : see partition.txt +- #size-cells : see partition.txt +- nand-ecc-strength : see nand.txt +- nand-ecc-step-size : must be 512 or 1024. See nand.txt + +Optional properties: +- nand-on-flash-bbt : boolean, to enable the on-flash BBT for this + chip-select. See nand.txt +- brcm,nand-oob-sector-size : integer, to denote the spare area sector size + expected for the ECC layout in use. This size, in + addition to the strength and step-size, + determines how the hardware BCH engine will lay + out the parity bytes it stores on the flash. + This property can be automatically determined by + the flash geometry (particularly the NAND page + and OOB size) in many cases, but when booting + from NAND, the boot controller has only a limited + number of available options for its default ECC + layout. + +Each nandcs device node may optionally contain sub-nodes describing the flash +partition mapping. See partition.txt for more detail. + + +Example: + +nand@f0442800 { + compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand"; + reg = <0xF0442800 0x600>, + <0xF0443000 0x100>; + reg-names = "nand", "flash-dma"; + interrupt-parent = <&hif_intr2_intc>; + interrupts = <24>, <4>; + + #address-cells = <1>; + #size-cells = <0>; + + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <1>; // Chip select 1 + nand-on-flash-bbt; + nand-ecc-strength = <12>; + nand-ecc-step-size = <512>; + + // Partitions + #address-cells = <1>; // <2>, for 64-bit offset + #size-cells = <1>; // <2>, for 64-bit length + flash0.rootfs@0 { + reg = <0 0x10000000>; + }; + flash0@0 { + reg = <0 0>; // MTDPART_SIZ_FULL + }; + flash0.kernel@10000000 { + reg = <0x10000000 0x400000>; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt b/kernel/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt index 4461dc71c..862aa2f88 100644 --- a/kernel/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt +++ b/kernel/Documentation/devicetree/bindings/mtd/fsl-quadspi.txt @@ -1,7 +1,8 @@ * Freescale Quad Serial Peripheral Interface(QuadSPI) Required properties: - - compatible : Should be "fsl,vf610-qspi" or "fsl,imx6sx-qspi" + - compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi", + "fsl,imx7d-qspi", "fsl,imx6ul-qspi" - reg : the first contains the register location and length, the second contains the memory mapping address and length - reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory" diff --git a/kernel/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/kernel/Documentation/devicetree/bindings/mtd/fsmc-nand.txt index 5235cbc55..32636eb77 100644 --- a/kernel/Documentation/devicetree/bindings/mtd/fsmc-nand.txt +++ b/kernel/Documentation/devicetree/bindings/mtd/fsmc-nand.txt @@ -30,6 +30,12 @@ Optional properties: command is asserted. Zero means one cycle, 255 means 256 cycles. - bank: default NAND bank to use (0-3 are valid, 0 is the default). +- nand-ecc-mode : see nand.txt +- nand-ecc-strength : see nand.txt +- nand-ecc-step-size : see nand.txt + +Can support 1-bit HW ECC (default) or if stronger correction is required, +software-based BCH. Example: diff --git a/kernel/Documentation/devicetree/bindings/mtd/nxp-spifi.txt b/kernel/Documentation/devicetree/bindings/mtd/nxp-spifi.txt new file mode 100644 index 000000000..f8b6b2506 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mtd/nxp-spifi.txt @@ -0,0 +1,58 @@ +* NXP SPI Flash Interface (SPIFI) + +NXP SPIFI is a specialized SPI interface for serial Flash devices. +It supports one Flash device with 1-, 2- and 4-bits width in SPI +mode 0 or 3. The controller operates in either command or memory +mode. In memory mode the Flash is accessible from the CPU as +normal memory. + +Required properties: + - compatible : Should be "nxp,lpc1773-spifi" + - reg : the first contains the register location and length, + the second contains the memory mapping address and length + - reg-names: Should contain the reg names "spifi" and "flash" + - interrupts : Should contain the interrupt for the device + - clocks : The clocks needed by the SPIFI controller + - clock-names : Should contain the clock names "spifi" and "reg" + +Optional properties: + - resets : phandle + reset specifier + +The SPI Flash must be a child of the SPIFI node and must have a +compatible property as specified in bindings/mtd/jedec,spi-nor.txt + +Optionally it can also contain the following properties. + - spi-cpol : Controller only supports mode 0 and 3 so either + both spi-cpol and spi-cpha should be present or + none of them + - spi-cpha : See above + - spi-rx-bus-width : Used to select how many pins that are used + for input on the controller + +See bindings/spi/spi-bus.txt for more information. + +Example: +spifi: spifi@40003000 { + compatible = "nxp,lpc1773-spifi"; + reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; + reg-names = "spifi", "flash"; + interrupts = <30>; + clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; + clock-names = "spifi", "reg"; + resets = <&rgu 53>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "data"; + reg = <0 0x200000>; + }; + }; +}; + diff --git a/kernel/Documentation/devicetree/bindings/mtd/partition.txt b/kernel/Documentation/devicetree/bindings/mtd/partition.txt index 8e5557da1..1c63e4065 100644 --- a/kernel/Documentation/devicetree/bindings/mtd/partition.txt +++ b/kernel/Documentation/devicetree/bindings/mtd/partition.txt @@ -4,10 +4,19 @@ Partitions can be represented by sub-nodes of an mtd device. This can be used on platforms which have strong conventions about which portions of a flash are used for what purposes, but which don't use an on-flash partition table such as RedBoot. -NOTE: if the sub-node has a compatible string, then it is not a partition. -#address-cells & #size-cells must both be present in the mtd device. There are -two valid values for both: +The partition table should be a subnode of the mtd node and should be named +'partitions'. This node should have the following property: +- compatible : (required) must be "fixed-partitions" +Partitions are then defined in subnodes of the partitions node. + +For backwards compatibility partitions as direct subnodes of the mtd device are +supported. This use is discouraged. +NOTE: also for backwards compatibility, direct subnodes that have a compatible +string are not considered partitions, as they may be used for other bindings. + +#address-cells & #size-cells must both be present in the partitions subnode of the +mtd device. There are two valid values for both: <1>: for partitions that require a single 32-bit cell to represent their size/address (aka the value is below 4 GiB) <2>: for partitions that require two 32-bit cells to represent their @@ -28,44 +37,53 @@ Examples: flash@0 { - #address-cells = <1>; - #size-cells = <1>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x100000>; - read-only; - }; + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; - uimage@100000 { - reg = <0x0100000 0x200000>; + uimage@100000 { + reg = <0x0100000 0x200000>; + }; }; }; flash@1 { - #address-cells = <1>; - #size-cells = <2>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <2>; - /* a 4 GiB partition */ - partition@0 { - label = "filesystem"; - reg = <0x00000000 0x1 0x00000000>; + /* a 4 GiB partition */ + partition@0 { + label = "filesystem"; + reg = <0x00000000 0x1 0x00000000>; + }; }; }; flash@2 { - #address-cells = <2>; - #size-cells = <2>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <2>; + #size-cells = <2>; - /* an 8 GiB partition */ - partition@0 { - label = "filesystem #1"; - reg = <0x0 0x00000000 0x2 0x00000000>; - }; + /* an 8 GiB partition */ + partition@0 { + label = "filesystem #1"; + reg = <0x0 0x00000000 0x2 0x00000000>; + }; - /* a 4 GiB partition */ - partition@200000000 { - label = "filesystem #2"; - reg = <0x2 0x00000000 0x1 0x00000000>; + /* a 4 GiB partition */ + partition@200000000 { + label = "filesystem #2"; + reg = <0x2 0x00000000 0x1 0x00000000>; + }; }; }; diff --git a/kernel/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/kernel/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt index 4f833e3c4..d9b655f11 100644 --- a/kernel/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ b/kernel/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -11,6 +11,7 @@ Required properties: Optional properties: + - dmas: dma data channel, see dma.txt binding doc - marvell,nand-enable-arbiter: Set to enable the bus arbiter - marvell,nand-keep-config: Set to keep the NAND controller config as set by the bootloader @@ -32,6 +33,8 @@ Example: compatible = "marvell,pxa3xx-nand"; reg = <0x43100000 90>; interrupts = <45>; + dmas = <&pdma 97 0>; + dma-names = "data"; #address-cells = <1>; marvell,nand-enable-arbiter; diff --git a/kernel/Documentation/devicetree/bindings/mtd/vf610-nfc.txt b/kernel/Documentation/devicetree/bindings/mtd/vf610-nfc.txt new file mode 100644 index 000000000..c96eeb65f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/mtd/vf610-nfc.txt @@ -0,0 +1,59 @@ +Freescale's NAND flash controller (NFC) + +This variant of the Freescale NAND flash controller (NFC) can be found on +Vybrid (vf610), MPC5125, MCF54418 and Kinetis K70. + +Required properties: +- compatible: Should be set to "fsl,vf610-nfc". +- reg: address range of the NFC. +- interrupts: interrupt of the NFC. +- #address-cells: shall be set to 1. Encode the nand CS. +- #size-cells : shall be set to 0. +- assigned-clocks: main clock from the SoC, for Vybrid <&clks VF610_CLK_NFC>; +- assigned-clock-rates: The NAND bus timing is derived from this clock + rate and should not exceed maximum timing for any NAND memory chip + in a board stuffing. Typical NAND memory timings derived from this + clock are found in the SoC hardware reference manual. Furthermore, + there might be restrictions on maximum rates when using hardware ECC. + +- #address-cells, #size-cells : Must be present if the device has sub-nodes + representing partitions. + +Required children nodes: +Children nodes represent the available nand chips. Currently the driver can +only handle one NAND chip. + +Required properties: +- compatible: Should be set to "fsl,vf610-nfc-cs". +- nand-bus-width: see nand.txt +- nand-ecc-mode: see nand.txt + +Required properties for hardware ECC: +- nand-ecc-strength: supported strengths are 24 and 32 bit (see nand.txt) +- nand-ecc-step-size: step size equals page size, currently only 2k pages are + supported +- nand-on-flash-bbt: see nand.txt + +Example: + + nfc: nand@400e0000 { + compatible = "fsl,vf610-nfc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x400e0000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_NFC>; + clock-names = "nfc"; + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + + nand@0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <32>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/kernel/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt deleted file mode 100644 index 8db32384a..000000000 --- a/kernel/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt +++ /dev/null @@ -1,48 +0,0 @@ -* AMD 10GbE PHY driver (amd-xgbe-phy) - -Required properties: -- compatible: Should be "amd,xgbe-phy-seattle-v1a" and - "ethernet-phy-ieee802.3-c45" -- reg: Address and length of the register sets for the device - - SerDes Rx/Tx registers - - SerDes integration registers (1/2) - - SerDes integration registers (2/2) -- interrupt-parent: Should be the phandle for the interrupt controller - that services interrupts for this device -- interrupts: Should contain the amd-xgbe-phy interrupt. - -Optional properties: -- amd,speed-set: Speed capabilities of the device - 0 - 1GbE and 10GbE (default) - 1 - 2.5GbE and 10GbE - -The following optional properties are represented by an array with each -value corresponding to a particular speed. The first array value represents -the setting for the 1GbE speed, the second value for the 2.5GbE speed and -the third value for the 10GbE speed. All three values are required if the -property is used. -- amd,serdes-blwc: Baseline wandering correction enablement - 0 - Off - 1 - On -- amd,serdes-cdr-rate: CDR rate speed selection -- amd,serdes-pq-skew: PQ (data sampling) skew -- amd,serdes-tx-amp: TX amplitude boost -- amd,serdes-dfe-tap-config: DFE taps available to run -- amd,serdes-dfe-tap-enable: DFE taps to enable - -Example: - xgbe_phy@e1240800 { - compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45"; - reg = <0 0xe1240800 0 0x00400>, - <0 0xe1250000 0 0x00060>, - <0 0xe1250080 0 0x00004>; - interrupt-parent = <&gic>; - interrupts = <0 323 4>; - amd,speed-set = <0>; - amd,serdes-blwc = <1>, <1>, <0>; - amd,serdes-cdr-rate = <2>, <2>, <7>; - amd,serdes-pq-skew = <10>, <10>, <30>; - amd,serdes-tx-amp = <15>, <15>, <10>; - amd,serdes-dfe-tap-config = <3>, <3>, <1>; - amd,serdes-dfe-tap-enable = <0>, <0>, <127>; - }; diff --git a/kernel/Documentation/devicetree/bindings/net/amd-xgbe.txt b/kernel/Documentation/devicetree/bindings/net/amd-xgbe.txt index 26efd526d..4bb624a73 100644 --- a/kernel/Documentation/devicetree/bindings/net/amd-xgbe.txt +++ b/kernel/Documentation/devicetree/bindings/net/amd-xgbe.txt @@ -5,12 +5,16 @@ Required properties: - reg: Address and length of the register sets for the device - MAC registers - PCS registers + - SerDes Rx/Tx registers + - SerDes integration registers (1/2) + - SerDes integration registers (2/2) - interrupt-parent: Should be the phandle for the interrupt controller that services interrupts for this device - interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt listed is required and is the general device interrupt. If the optional amd,per-channel-interrupt property is specified, then one additional - interrupt for each DMA channel supported by the device should be specified + interrupt for each DMA channel supported by the device should be specified. + The last interrupt listed should be the PCS auto-negotiation interrupt. - clocks: - DMA clock for the amd-xgbe device (used for calculating the correct Rx interrupt watchdog timer value on a DMA channel @@ -19,7 +23,6 @@ Required properties: - clock-names: Should be the names of the clocks - "dma_clk" for the DMA clock - "ptp_clk" for the PTP clock -- phy-handle: See ethernet.txt file in the same directory - phy-mode: See ethernet.txt file in the same directory Optional properties: @@ -29,19 +32,46 @@ Optional properties: - amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate a unique interrupt for each DMA channel - this requires an additional interrupt be configured for each DMA channel +- amd,speed-set: Speed capabilities of the device + 0 - 1GbE and 10GbE (default) + 1 - 2.5GbE and 10GbE + +The following optional properties are represented by an array with each +value corresponding to a particular speed. The first array value represents +the setting for the 1GbE speed, the second value for the 2.5GbE speed and +the third value for the 10GbE speed. All three values are required if the +property is used. +- amd,serdes-blwc: Baseline wandering correction enablement + 0 - Off + 1 - On +- amd,serdes-cdr-rate: CDR rate speed selection +- amd,serdes-pq-skew: PQ (data sampling) skew +- amd,serdes-tx-amp: TX amplitude boost +- amd,serdes-dfe-tap-config: DFE taps available to run +- amd,serdes-dfe-tap-enable: DFE taps to enable Example: xgbe@e0700000 { compatible = "amd,xgbe-seattle-v1a"; reg = <0 0xe0700000 0 0x80000>, - <0 0xe0780000 0 0x80000>; + <0 0xe0780000 0 0x80000>, + <0 0xe1240800 0 0x00400>, + <0 0xe1250000 0 0x00060>, + <0 0xe1250080 0 0x00004>; interrupt-parent = <&gic>; interrupts = <0 325 4>, - <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>; + <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>, + <0 323 4>; amd,per-channel-interrupt; clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>; clock-names = "dma_clk", "ptp_clk"; - phy-handle = <&phy>; phy-mode = "xgmii"; mac-address = [ 02 a1 a2 a3 a4 a5 ]; + amd,speed-set = <0>; + amd,serdes-blwc = <1>, <1>, <0>; + amd,serdes-cdr-rate = <2>, <2>, <7>; + amd,serdes-pq-skew = <10>, <10>, <30>; + amd,serdes-tx-amp = <15>, <15>, <10>; + amd,serdes-dfe-tap-config = <3>, <3>, <1>; + amd,serdes-dfe-tap-enable = <0>, <0>, <127>; }; diff --git a/kernel/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/kernel/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index f55aa280d..078060a97 100644 --- a/kernel/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/kernel/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -37,6 +37,14 @@ Required properties for ethernet interfaces that have external PHY: Optional properties: - status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok". +- tx-delay: Delay value for RGMII bridge TX clock. + Valid values are between 0 to 7, that maps to + 417, 717, 1020, 1321, 1611, 1913, 2215, 2514 ps + Default value is 4, which corresponds to 1611 ps +- rx-delay: Delay value for RGMII bridge RX clock. + Valid values are between 0 to 7, that maps to + 273, 589, 899, 1222, 1480, 1806, 2147, 2464 ps + Default value is 2, which corresponds to 899 ps Example: menetclk: menetclk { @@ -72,5 +80,7 @@ Example: /* Board-specific peripheral configurations */ &menet { + tx-delay = <4>; + rx-delay = <2>; status = "ok"; }; diff --git a/kernel/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt b/kernel/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt new file mode 100644 index 000000000..8ba9ed11d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/brcm,iproc-mdio.txt @@ -0,0 +1,23 @@ +* Broadcom iProc MDIO bus controller + +Required properties: +- compatible: should be "brcm,iproc-mdio" +- reg: address and length of the register set for the MDIO interface +- #size-cells: must be 1 +- #address-cells: must be 0 + +Child nodes of this MDIO bus controller node are standard Ethernet PHY device +nodes as described in Documentation/devicetree/bindings/net/phy.txt + +Example: + +mdio@18002000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18002000 0x8>; + #size-cells = <1>; + #address-cells = <0>; + + enet-gphy@0 { + reg = <0>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/net/can/sun4i_can.txt b/kernel/Documentation/devicetree/bindings/net/can/sun4i_can.txt new file mode 100644 index 000000000..84ed1909d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/can/sun4i_can.txt @@ -0,0 +1,36 @@ +Allwinner A10/A20 CAN controller Device Tree Bindings +----------------------------------------------------- + +Required properties: +- compatible: "allwinner,sun4i-a10-can" +- reg: physical base address and size of the Allwinner A10/A20 CAN register map. +- interrupts: interrupt specifier for the sole interrupt. +- clock: phandle and clock specifier. + +Example +------- + +SoC common .dtsi file: + + can0_pins_a: can0@0 { + allwinner,pins = "PH20","PH21"; + allwinner,function = "can"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; +... + can0: can@01c2bc00 { + compatible = "allwinner,sun4i-a10-can"; + reg = <0x01c2bc00 0x400>; + interrupts = <0 26 4>; + clocks = <&apb1_gates 4>; + status = "disabled"; + }; + +Board specific .dts file: + + can0: can@01c2bc00 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; diff --git a/kernel/Documentation/devicetree/bindings/net/cpsw.txt b/kernel/Documentation/devicetree/bindings/net/cpsw.txt index 33fe8462e..28a4781ab 100644 --- a/kernel/Documentation/devicetree/bindings/net/cpsw.txt +++ b/kernel/Documentation/devicetree/bindings/net/cpsw.txt @@ -2,7 +2,11 @@ TI SoC Ethernet Switch Controller Device Tree Bindings ------------------------------------------------------ Required properties: -- compatible : Should be "ti,cpsw" +- compatible : Should be one of the below:- + "ti,cpsw" for backward compatible + "ti,am335x-cpsw" for AM335x controllers + "ti,am4372-cpsw" for AM437x controllers + "ti,dra7-cpsw" for DRA7x controllers - reg : physical base address and size of the cpsw registers map - interrupts : property with a value describing the interrupt @@ -26,15 +30,28 @@ Optional properties: - dual_emac : Specifies Switch to act as Dual EMAC - syscon : Phandle to the system control device node, which is the control module device of the am33x +- mode-gpios : Should be added if one/multiple gpio lines are + required to be driven so that cpsw data lines + can be connected to the phy via selective mux. + For example in dra72x-evm, pcf gpio has to be + driven low so that cpsw slave 0 and phy data + lines are connected via mux. + Slave Properties: Required properties: -- phy_id : Specifies slave phy id - phy-mode : See ethernet.txt file in the same directory Optional properties: - dual_emac_res_vlan : Specifies VID to be used to segregate the ports - mac-address : See ethernet.txt file in the same directory +- phy_id : Specifies slave phy id +- phy-handle : See ethernet.txt file in the same directory + +Slave sub-nodes: +- fixed-link : See fixed-link.txt file in the same directory + Either the property phy_id, or the sub-node + fixed-link can be specified Note: "ti,hwmods" field is used to fetch the base address and irq resources from TI, omap hwmod data base during device registration. diff --git a/kernel/Documentation/devicetree/bindings/net/dsa/dsa.txt b/kernel/Documentation/devicetree/bindings/net/dsa/dsa.txt index f0b4cd724..04e6bef3a 100644 --- a/kernel/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/kernel/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -44,9 +44,10 @@ Note that a port labelled "dsa" will imply checking for the uplink phandle described below. Optionnal property: -- link : Should be a phandle to another switch's DSA port. +- link : Should be a list of phandles to another switch's DSA port. This property is only used when switches are being - chained/cascaded together. + chained/cascaded together. This port is used as outgoing port + towards the phandle port, which can be more than one hop away. - phy-handle : Phandle to a PHY on an external MDIO bus, not the switch internal one. See @@ -58,6 +59,10 @@ Optionnal property: Documentation/devicetree/bindings/net/ethernet.txt for details. +- mii-bus : Should be a phandle to a valid MDIO bus device node. + This mii-bus will be used in preference to the + global dsa,mii-bus defined above, for this switch. + Optional subnodes: - fixed-link : Fixed-link subnode describing a link to a non-MDIO managed entity. See @@ -96,10 +101,11 @@ Example: label = "cpu"; }; - switch0uplink: port@6 { + switch0port6: port@6 { reg = <6>; label = "dsa"; - link = <&switch1uplink>; + link = <&switch1port0 + &switch2port0>; }; }; @@ -107,11 +113,31 @@ Example: #address-cells = <1>; #size-cells = <0>; reg = <17 1>; /* MDIO address 17, switch 1 in tree */ + mii-bus = <&mii_bus1>; + + switch1port0: port@0 { + reg = <0>; + label = "dsa"; + link = <&switch0port6>; + }; + switch1port1: port@1 { + reg = <1>; + label = "dsa"; + link = <&switch2port1>; + }; + }; + + switch@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <18 2>; /* MDIO address 18, switch 2 in tree */ + mii-bus = <&mii_bus1>; - switch1uplink: port@0 { + switch2port0: port@0 { reg = <0>; label = "dsa"; - link = <&switch0uplink>; + link = <&switch1port1 + &switch0port6>; }; }; }; diff --git a/kernel/Documentation/devicetree/bindings/net/ezchip_enet.txt b/kernel/Documentation/devicetree/bindings/net/ezchip_enet.txt new file mode 100644 index 000000000..4e29b2b82 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/ezchip_enet.txt @@ -0,0 +1,15 @@ +* EZchip NPS Management Ethernet port driver + +Required properties: +- compatible: Should be "ezchip,nps-mgt-enet" +- reg: Address and length of the register set for the device +- interrupts: Should contain the ENET interrupt + +Examples: + + ethernet@f0003000 { + compatible = "ezchip,nps-mgt-enet"; + reg = <0xf0003000 0x44>; + interrupts = <7>; + mac-address = [ 00 11 22 33 44 55 ]; + }; diff --git a/kernel/Documentation/devicetree/bindings/net/fixed-link.txt b/kernel/Documentation/devicetree/bindings/net/fixed-link.txt index 82bf7e0f4..ec5d889fe 100644 --- a/kernel/Documentation/devicetree/bindings/net/fixed-link.txt +++ b/kernel/Documentation/devicetree/bindings/net/fixed-link.txt @@ -17,6 +17,8 @@ properties: enabled. * 'asym-pause' (boolean, optional), to indicate that asym_pause should be enabled. +* 'link-gpios' ('gpio-list', optional), to indicate if a gpio can be read + to determine if the link is up. Old, deprecated 'fixed-link' binding: @@ -30,7 +32,7 @@ Old, deprecated 'fixed-link' binding: - e: asymmetric pause configuration: 0 for no asymmetric pause, 1 for asymmetric pause -Example: +Examples: ethernet@0 { ... @@ -40,3 +42,13 @@ ethernet@0 { }; ... }; + +ethernet@1 { + ... + fixed-link { + speed = <1000>; + pause; + link-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + ... +}; diff --git a/kernel/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/kernel/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 1e97532a0..db74f0dc2 100644 --- a/kernel/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/kernel/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -57,6 +57,10 @@ Properties: "rgmii-id", as all other connection types are detected by hardware. - fsl,magic-packet : If present, indicates that the hardware supports waking up via magic packet. + - fsl,wake-on-filer : If present, indicates that the hardware supports + waking up by Filer General Purpose Interrupt (FGPI) asserted on the + Rx int line. This is an advanced power management capability allowing + certain packet types (user) defined by filer rules to wake up the system. - bd-stash : If present, indicates that the hardware supports stashing buffer descriptors in the L2. - rx-stash-len : Denotes the number of bytes of a received buffer to stash diff --git a/kernel/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt b/kernel/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt index 988fc694b..d1df8a00e 100644 --- a/kernel/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt +++ b/kernel/Documentation/devicetree/bindings/net/hisilicon-hip04-net.txt @@ -32,13 +32,13 @@ Required properties: Required properties: -- compatible: should be "hisilicon,hip04-mdio". +- compatible: should be "hisilicon,mdio". - Inherits from MDIO bus node binding [2] [2] Documentation/devicetree/bindings/net/phy.txt Example: mdio { - compatible = "hisilicon,hip04-mdio"; + compatible = "hisilicon,mdio"; reg = <0x28f1000 0x1000>; #address-cells = <1>; #size-cells = <0>; diff --git a/kernel/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt b/kernel/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt new file mode 100644 index 000000000..80411b2f0 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt @@ -0,0 +1,49 @@ +Hisilicon DSA Fabric device controller + +Required properties: +- compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2". + "hisilicon,hns-dsaf-v1" is for hip05. + "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612. +- dsa-name: dsa fabric name who provide this interface. + should be "dsafX", X is the dsaf id. +- mode: dsa fabric mode string. only support one of dsaf modes like these: + "2port-64vf", + "6port-16rss", + "6port-16vf". +- interrupt-parent: the interrupt parent of this device. +- interrupts: should contain the DSA Fabric and rcb interrupt. +- reg: specifies base physical address(es) and size of the device registers. + The first region is external interface control register base and size. + The second region is SerDes base register and size. + The third region is the PPE register base and size. + The fourth region is dsa fabric base register and size. + The fifth region is cpld base register and size, it is not required if do not use cpld. +- phy-handle: phy handle of physicl port, 0 if not any phy device. see ethernet.txt [1]. +- buf-size: rx buffer size, should be 16-1024. +- desc-num: number of description in TX and RX queue, should be 512, 1024, 2048 or 4096. + +[1] Documentation/devicetree/bindings/net/phy.txt + +Example: + +dsa: dsa@c7000000 { + compatible = "hisilicon,hns-dsaf-v1"; + dsa_name = "dsaf0"; + mode = "6port-16rss"; + interrupt-parent = <&mbigen_dsa>; + reg = <0x0 0xC0000000 0x0 0x420000 + 0x0 0xC2000000 0x0 0x300000 + 0x0 0xc5000000 0x0 0x890000 + 0x0 0xc7000000 0x0 0x60000>; + phy-handle = <0 0 0 0 &soc0_phy4 &soc0_phy5 0 0>; + interrupts = <131 4>,<132 4>, <133 4>,<134 4>, + <135 4>,<136 4>, <137 4>,<138 4>, + <139 4>,<140 4>, <141 4>,<142 4>, + <143 4>,<144 4>, <145 4>,<146 4>, + <147 4>,<148 4>, <384 1>,<385 1>, + <386 1>,<387 1>, <388 1>,<389 1>, + <390 1>,<391 1>, + buf-size = <4096>; + desc-num = <1024>; + dma-coherent; +}; diff --git a/kernel/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt b/kernel/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt new file mode 100644 index 000000000..9c23fdf25 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/hisilicon-hns-mdio.txt @@ -0,0 +1,22 @@ +Hisilicon MDIO bus controller + +Properties: +- compatible: "hisilicon,mdio","hisilicon,hns-mdio". +- reg: The base address of the MDIO bus controller register bank. +- #address-cells: Must be <1>. +- #size-cells: Must be <0>. MDIO addresses have no size component. + +Typically an MDIO bus might have several children. + +Example: + mdio@803c0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "hisilicon,hns-mdio","hisilicon,mdio"; + reg = <0x0 0x803c0000 0x0 0x10000>; + + ethernet-phy@0 { + ... + reg = <0>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt b/kernel/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt new file mode 100644 index 000000000..41d19be70 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt @@ -0,0 +1,47 @@ +Hisilicon Network Subsystem NIC controller + +Required properties: +- compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2". + "hisilicon,hns-nic-v1" is for hip05. + "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612. +- ae-name: accelerator name who provides this interface, + is simply a name referring to the name of name in the accelerator node. +- port-id: is the index of port provided by DSAF (the accelerator). DSAF can + connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They + are called debug ports. + + The remaining 6 PHYs are taken according to the mode of DSAF. + + In NIC mode of DSAF, all 6 PHYs are taken as ethernet ports to the CPU. The + port-id can be 2 to 7. Here is the diagram: + +-----+---------------+ + | CPU | + +-+-+-+---+-+-+-+-+-+-+ + | | | | | | | | + debug service + port port + (0,1) (2-7) + + In Switch mode of DSAF, all 6 PHYs are taken as physical ports connect to a + LAN Switch while the CPU side assume itself have one single NIC connect to + this switch. In this case, the port-id will be 2 only. + +-----+---------------+ + | CPU | + +-+-+-+---+-+-+-+-+-+-+ + | | service| port(2) + debug +------------+ + port | switch | + (0,1) +-+-+-+-+-+-++ + | | | | | | + external port + +- local-mac-address: mac addr of the ethernet interface + +Example: + + ethernet@0{ + compatible = "hisilicon,hns-nic-v1"; + ae-name = "dsaf0"; + port-id = <0>; + local-mac-address = [a2 14 e4 4b 56 76]; + }; diff --git a/kernel/Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt b/kernel/Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt new file mode 100644 index 000000000..a4ed2efb5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/ieee802154/mrf24j40.txt @@ -0,0 +1,20 @@ +* MRF24J40 IEEE 802.15.4 * + +Required properties: + - compatible: should be "microchip,mrf24j40", "microchip,mrf24j40ma", + or "microchip,mrf24j40mc" depends on your transceiver + board + - spi-max-frequency: maximal bus speed, should be set something under or equal + 10000000 + - reg: the chipselect index + - interrupts: the interrupt generated by the device. + +Example: + + mrf24j40ma@0 { + compatible = "microchip,mrf24j40ma"; + spi-max-frequency = <8500000>; + reg = <0>; + interrupts = <19 8>; + interrupt-parent = <&gpio3>; + }; diff --git a/kernel/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt b/kernel/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt new file mode 100644 index 000000000..6d7ab4e52 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/ipq806x-dwmac.txt @@ -0,0 +1,35 @@ +* IPQ806x DWMAC Ethernet controller + +The device inherits all the properties of the dwmac/stmmac devices +described in the file net/stmmac.txt with the following changes. + +Required properties: + +- compatible: should be "qcom,ipq806x-gmac" along with "snps,dwmac" + and any applicable more detailed version number + described in net/stmmac.txt + +- qcom,nss-common: should contain a phandle to a syscon device mapping the + nss-common registers. + +- qcom,qsgmii-csr: should contain a phandle to a syscon device mapping the + qsgmii-csr registers. + +Example: + + gmac: ethernet@37000000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37000000 0x200000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE1_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE1_RESET>; + reset-names = "stmmaceth"; + }; diff --git a/kernel/Documentation/devicetree/bindings/net/keystone-netcp.txt b/kernel/Documentation/devicetree/bindings/net/keystone-netcp.txt index d0e6fa38f..b30ab6b5c 100644 --- a/kernel/Documentation/devicetree/bindings/net/keystone-netcp.txt +++ b/kernel/Documentation/devicetree/bindings/net/keystone-netcp.txt @@ -130,7 +130,11 @@ Required properties: Optional properties: - efuse-mac: If this is 1, then the MAC address for the interface is - obtained from the device efuse mac address register + obtained from the device efuse mac address register. + If this is 2, the two DWORDs occupied by the MAC address + are swapped. The netcp driver will swap the two DWORDs + back to the proper order when this property is set to 2 + when it obtains the mac address from efuse. - local-mac-address: the driver is designed to use the of_get_mac_address api only if efuse-mac is 0. When efuse-mac is 0, the MAC address is obtained from local-mac-address. If this diff --git a/kernel/Documentation/devicetree/bindings/net/macb.txt b/kernel/Documentation/devicetree/bindings/net/macb.txt index ba19d671e..b5d79761a 100644 --- a/kernel/Documentation/devicetree/bindings/net/macb.txt +++ b/kernel/Documentation/devicetree/bindings/net/macb.txt @@ -7,8 +7,10 @@ Required properties: Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on the Cadence GEM, or the generic form: "cdns,gem". - Use "cdns,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. - Use "cdns,sama5d4-gem" for the Gigabit IP available on Atmel sama5d4 SoCs. + Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs. + Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs. + Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs. + Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC. - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - phy-mode: See ethernet.txt file in the same directory. diff --git a/kernel/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/kernel/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index f5a8ca29a..aeea50c84 100644 --- a/kernel/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/kernel/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -8,6 +8,11 @@ Required properties: - phy-mode: See ethernet.txt file in the same directory - clocks: a pointer to the reference clock for this device. +Optional properties: +- tx-csum-limit: maximum mtu supported by port that allow TX checksum. + Value is presented in bytes. If not used, by default 1600B is set for + "marvell,armada-370-neta" and 9800B for others. + Example: ethernet@d0070000 { @@ -15,6 +20,7 @@ ethernet@d0070000 { reg = <0xd0070000 0x2500>; interrupts = <8>; clocks = <&gate_clk 4>; + tx-csum-limit = <9800> status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; diff --git a/kernel/Documentation/devicetree/bindings/net/maxim,ds26522.txt b/kernel/Documentation/devicetree/bindings/net/maxim,ds26522.txt new file mode 100644 index 000000000..ee8bb725f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/maxim,ds26522.txt @@ -0,0 +1,13 @@ +* Maxim (Dallas) DS26522 Dual T1/E1/J1 Transceiver + +Required properties: +- compatible: Should contain "maxim,ds26522". +- reg: SPI CS. +- spi-max-frequency: SPI clock. + +Example: + slic@1 { + compatible = "maxim,ds26522"; + reg = <1>; + spi-max-frequency = <2000000>; /* input clock */ + }; diff --git a/kernel/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/kernel/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt new file mode 100644 index 000000000..76df91738 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt @@ -0,0 +1,86 @@ +* Marvell International Ltd. NCI NFC Controller + +Required properties: +- compatible: Should be: + - "marvell,nfc-uart" or "mrvl,nfc-uart" for UART devices + - "marvell,nfc-i2c" for I2C devices + - "marvell,nfc-spi" for SPI devices + +Optional SoC specific properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. +- reset-n-io: Output GPIO pin used to reset the chip (active low). +- hci-muxed: Specifies that the chip is muxing NCI over HCI frames. + +Optional UART-based chip specific properties: +- flow-control: Specifies that the chip is using RTS/CTS. +- break-control: Specifies that the chip needs specific break management. + +Optional I2C-based chip specific properties: +- i2c-int-falling: Specifies that the chip read event shall be trigged on + falling edge. +- i2c-int-rising: Specifies that the chip read event shall be trigged on + rising edge. + +Example (for ARM-based BeagleBoard Black with 88W8887 on UART5): + +&uart5 { + status = "okay"; + + nfcmrvluart: nfcmrvluart@5 { + compatible = "marvell,nfc-uart"; + + reset-n-io = <&gpio3 16 0>; + + hci-muxed; + flow-control; + } +}; + + +Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1): + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + nfcmrvli2c0: i2c@1 { + compatible = "marvell,nfc-i2c"; + + reg = <0x8>; + + /* I2C INT configuration */ + interrupt-parent = <&gpio3>; + interrupts = <21 0>; + + /* I2C INT trigger configuration */ + i2c-int-rising; + + /* Reset IO */ + reset-n-io = <&gpio3 19 0>; + }; +}; + + +Example (for ARM-based BeagleBoard Black on SPI0): + +&spi0 { + + mrvlnfcspi0: spi@0 { + compatible = "marvell,nfc-spi"; + + reg = <0>; + + /* SPI Bus configuration */ + spi-max-frequency = <3000000>; + spi-cpha; + spi-cpol; + + /* SPI INT configuration */ + interrupt-parent = <&gpio1>; + interrupts = <17 0>; + + /* Reset IO */ + reset-n-io = <&gpio3 19 0>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt b/kernel/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt new file mode 100644 index 000000000..fb1e75fac --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/nfc/s3fwrn5.txt @@ -0,0 +1,27 @@ +* Samsung S3FWRN5 NCI NFC Controller + +Required properties: +- compatible: Should be "samsung,s3fwrn5-i2c". +- reg: address on the bus +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- s3fwrn5,en-gpios: Output GPIO pin used for enabling/disabling the chip +- s3fwrn5,fw-gpios: Output GPIO pin used to enter firmware mode and + sleep/wakeup control + +Example: + +&hsi2c_4 { + status = "okay"; + s3fwrn5@27 { + compatible = "samsung,s3fwrn5-i2c"; + + reg = <0x27>; + + interrupt-parent = <&gpa1>; + interrupts = <3 0 0>; + + s3fwrn5,en-gpios = <&gpf1 4 0>; + s3fwrn5,fw-gpios = <&gpj0 2 0>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt b/kernel/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt index bb237072d..263732e88 100644 --- a/kernel/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt +++ b/kernel/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt @@ -1,7 +1,7 @@ -* STMicroelectronics SAS. ST21NFCB NFC Controller +* STMicroelectronics SAS. ST NCI NFC Controller Required properties: -- compatible: Should be "st,st21nfcb-i2c". +- compatible: Should be "st,st21nfcb-i2c" or "st,st21nfcc-i2c". - clock-frequency: I²C work frequency. - reg: address on the bus - interrupt-parent: phandle for the interrupt gpio controller @@ -11,6 +11,10 @@ Required properties: Optional SoC Specific Properties: - pinctrl-names: Contains only one value - "default". - pintctrl-0: Specifies the pin control groups used for this controller. +- ese-present: Specifies that an ese is physically connected to the nfc +controller. +- uicc-present: Specifies that the uicc swp signal can be physically +connected to the nfc controller. Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): @@ -29,5 +33,8 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + + ese-present; + uicc-present; }; }; diff --git a/kernel/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/kernel/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt new file mode 100644 index 000000000..711ca85a3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt @@ -0,0 +1,38 @@ +* STMicroelectronics SAS. ST NCI NFC Controller + +Required properties: +- compatible: Should be "st,st21nfcb-spi" +- spi-max-frequency: Maximum SPI frequency (<= 4000000). +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- reset-gpios: Output GPIO pin used to reset the ST21NFCB + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. +- ese-present: Specifies that an ese is physically connected to the nfc +controller. +- uicc-present: Specifies that the uicc swp signal can be physically +connected to the nfc controller. + +Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4): + +&mcspi4 { + + status = "okay"; + + st21nfcb: st21nfcb@0 { + + compatible = "st,st21nfcb-spi"; + + clock-frequency = <4000000>; + + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + + reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + + ese-present; + uicc-present; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/kernel/Documentation/devicetree/bindings/net/nfc/trf7970a.txt index 7c89ca290..32b35a07a 100644 --- a/kernel/Documentation/devicetree/bindings/net/nfc/trf7970a.txt +++ b/kernel/Documentation/devicetree/bindings/net/nfc/trf7970a.txt @@ -18,6 +18,9 @@ Optional SoC Specific Properties: "IRQ Status Read" erratum. - en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF" erratum. +- t5t-rmb-extra-byte-quirk: Specify that the trf7970a has the erratum + where an extra byte is returned by Read Multiple Block commands issued + to Type 5 tags. Example (for ARM-based BeagleBone with TRF7970A on SPI1): @@ -39,6 +42,7 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1): autosuspend-delay = <30000>; irq-status-read-quirk; en2-rf-quirk; + t5t-rmb-extra-byte-quirk; status = "okay"; }; }; diff --git a/kernel/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt b/kernel/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt new file mode 100644 index 000000000..7edba1264 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt @@ -0,0 +1,20 @@ +* NXP LPC1850 GMAC ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: + - compatible: Should contain "nxp,lpc1850-dwmac" + +Examples: + +mac: ethernet@40010000 { + compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; + reg = <0x40010000 0x2000>; + interrupts = <5>; + interrupt-names = "macirq"; + clocks = <&ccu1 CLK_CPU_ETHERNET>; + clock-names = "stmmaceth"; + resets = <&rgu 22>; + reset-names = "stmmaceth"; +} diff --git a/kernel/Documentation/devicetree/bindings/net/phy.txt b/kernel/Documentation/devicetree/bindings/net/phy.txt index 40831fbaf..525e1658f 100644 --- a/kernel/Documentation/devicetree/bindings/net/phy.txt +++ b/kernel/Documentation/devicetree/bindings/net/phy.txt @@ -30,6 +30,9 @@ Optional Properties: - max-speed: Maximum PHY supported speed (10, 100, 1000...) +- broken-turn-around: If set, indicates the PHY device does not correctly + release the turn around line low at the end of a MDIO transaction. + Example: ethernet-phy@0 { diff --git a/kernel/Documentation/devicetree/bindings/net/renesas,ravb.txt b/kernel/Documentation/devicetree/bindings/net/renesas,ravb.txt new file mode 100644 index 000000000..b486f3f5f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -0,0 +1,103 @@ +* Renesas Electronics Ethernet AVB + +This file provides information on what the device node for the Ethernet AVB +interface contains. + +Required properties: +- compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC. + "renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC. + "renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC. +- reg: offset and length of (1) the register block and (2) the stream buffer. +- interrupts: A list of interrupt-specifiers, one for each entry in + interrupt-names. + If interrupt-names is not present, an interrupt specifier + for a single muxed interrupt. +- phy-mode: see ethernet.txt file in the same directory. +- phy-handle: see ethernet.txt file in the same directory. +- #address-cells: number of address cells for the MDIO bus, must be equal to 1. +- #size-cells: number of size cells on the MDIO bus, must be equal to 0. +- clocks: clock phandle and specifier pair. +- pinctrl-0: phandle, referring to a default pin configuration node. + +Optional properties: +- interrupt-parent: the phandle for the interrupt controller that services + interrupts for this device. +- interrupt-names: A list of interrupt names. + For the R8A7795 SoC this property is mandatory; + it should include one entry per channel, named "ch%u", + where %u is the channel number ranging from 0 to 24. + For other SoCs this property is optional; if present + it should contain "mux" for a single muxed interrupt. +- pinctrl-names: pin configuration state name ("default"). +- renesas,no-ether-link: boolean, specify when a board does not provide a proper + AVB_LINK signal. +- renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is + active-low instead of normal active-high. + +Example: + + ethernet@e6800000 { + compatible = "renesas,etheravb-r8a7795"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>; + power-domains = <&cpg_clocks>; + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + + pinctrl-0 = <ðer_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <900>; + rxdv-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txc-skew-ps = <900>; + txen-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/kernel/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 21fd199e8..93eac7ce1 100644 --- a/kernel/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/kernel/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -3,7 +3,7 @@ Rockchip SoC RK3288 10/100/1000 Ethernet driver(GMAC) The device node has following properties. Required properties: - - compatible: Can be "rockchip,rk3288-gmac". + - compatible: Can be one of "rockchip,rk3288-gmac", "rockchip,rk3368-gmac" - reg: addresses and length of the register sets for the device. - interrupts: Should contain the GMAC interrupts. - interrupt-names: Should contain the interrupt names "macirq". diff --git a/kernel/Documentation/devicetree/bindings/net/smsc-lan87xx.txt b/kernel/Documentation/devicetree/bindings/net/smsc-lan87xx.txt new file mode 100644 index 000000000..974edd5c8 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/smsc-lan87xx.txt @@ -0,0 +1,24 @@ +SMSC LAN87xx Ethernet PHY + +Some boards require special tuning values. Configure them +through an Ethernet OF device node. + +Optional properties: + +- smsc,disable-energy-detect: + If set, do not enable energy detect mode for the SMSC phy. + default: enable energy detect mode + +Examples: +smsc phy with disabled energy detect mode on an am335x based board. +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; + + ethernetphy0: ethernet-phy@0 { + reg = <0>; + smsc,disable-energy-detect; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt b/kernel/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt new file mode 100644 index 000000000..51f8d2eba --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/snps,dwc-qos-ethernet.txt @@ -0,0 +1,75 @@ +* Synopsys DWC Ethernet QoS IP version 4.10 driver (GMAC) + + +Required properties: +- compatible: Should be "snps,dwc-qos-ethernet-4.10" +- reg: Address and length of the register set for the device +- clocks: Phandles to the reference clock and the bus clock +- clock-names: Should be "phy_ref_clk" for the reference clock and "apb_pclk" + for the bus clock. +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupts: Should contain the core's combined interrupt signal +- phy-mode: See ethernet.txt file in the same directory + +Optional properties: +- dma-coherent: Present if dma operations are coherent +- mac-address: See ethernet.txt in the same directory +- local-mac-address: See ethernet.txt in the same directory +- snps,en-lpi: If present it enables use of the AXI low-power interface +- snps,write-requests: Number of write requests that the AXI port can issue. + It depends on the SoC configuration. +- snps,read-requests: Number of read requests that the AXI port can issue. + It depends on the SoC configuration. +- snps,burst-map: Bitmap of allowed AXI burst lengts, with the LSB + representing 4, then 8 etc. +- snps,txpbl: DMA Programmable burst length for the TX DMA +- snps,rxpbl: DMA Programmable burst length for the RX DMA +- snps,en-tx-lpi-clockgating: Enable gating of the MAC TX clock during + TX low-power mode. +- phy-handle: See ethernet.txt file in the same directory +- mdio device tree subnode: When the GMAC has a phy connected to its local + mdio, there must be device tree subnode with the following + required properties: + - compatible: Must be "snps,dwc-qos-ethernet-mdio". + - #address-cells: Must be <1>. + - #size-cells: Must be <0>. + + For each phy on the mdio bus, there must be a node with the following + fields: + + - reg: phy id used to communicate to phy. + - device_type: Must be "ethernet-phy". + - fixed-mode device tree subnode: see fixed-link.txt in the same directory + +Examples: +ethernet2@40010000 { + clock-names = "phy_ref_clk", "apb_pclk"; + clocks = <&clkc 17>, <&clkc 15>; + compatible = "snps,dwc-qos-ethernet-4.10"; + interrupt-parent = <&intc>; + interrupts = <0x0 0x1e 0x4>; + reg = <0x40010000 0x4000>; + phy-handle = <&phy2>; + phy-mode = "gmii"; + + snps,en-tx-lpi-clockgating; + snps,en-lpi; + snps,write-requests = <2>; + snps,read-requests = <16>; + snps,burst-map = <0x7>; + snps,txpbl = <8>; + snps,rxpbl = <2>; + + dma-coherent; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + phy2: phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + device_type = "ethernet-phy"; + reg = <0x1>; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/net/ti,dp83867.txt b/kernel/Documentation/devicetree/bindings/net/ti,dp83867.txt new file mode 100644 index 000000000..58d935b58 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/net/ti,dp83867.txt @@ -0,0 +1,25 @@ +* Texas Instruments - dp83867 Giga bit ethernet phy + +Required properties: + - reg - The ID number for the phy, usually a small integer + - ti,rx-internal-delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h + for applicable values + - ti,tx-internal-delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h + for applicable values + - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h + for applicable values + +Default child nodes are standard Ethernet PHY device +nodes as described in Documentation/devicetree/bindings/net/phy.txt + +Example: + + ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + +Datasheet can be found: +http://www.ti.com/product/DP83867IR/datasheet diff --git a/kernel/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/kernel/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index fabdf64a5..d543ed3f5 100644 --- a/kernel/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt +++ b/kernel/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -4,6 +4,10 @@ Required properties: - compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" - reg: Should contain registers location and length += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + Example for sun4i: sid@01c23800 { compatible = "allwinner,sun4i-a10-sid"; diff --git a/kernel/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/kernel/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt new file mode 100644 index 000000000..383d5889e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -0,0 +1,20 @@ +Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings + +This binding represents the on-chip eFuse OTP controller found on +i.MX6Q/D, i.MX6DL/S, i.MX6SL, and i.MX6SX SoCs. + +Required properties: +- compatible: should be one of + "fsl,imx6q-ocotp" (i.MX6Q/D/DL/S), + "fsl,imx6sl-ocotp" (i.MX6SL), or + "fsl,imx6sx-ocotp" (i.MX6SX), followed by "syscon". +- reg: Should contain the register base and length. +- clocks: Should contain a phandle pointing to the gated peripheral clock. + +Example: + + ocotp: ocotp@021bc000 { + compatible = "fsl,imx6q-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6QDL_CLK_IIM>; + }; diff --git a/kernel/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt b/kernel/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt new file mode 100644 index 000000000..daebce9e6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt @@ -0,0 +1,25 @@ +On-Chip OTP Memory for Freescale i.MX23/i.MX28 + +Required properties : +- compatible : + - "fsl,imx23-ocotp" for i.MX23 + - "fsl,imx28-ocotp" for i.MX28 +- #address-cells : Should be 1 +- #size-cells : Should be 1 +- reg : Address and length of OTP controller registers +- clocks : Should contain a reference to the hbus clock + += Data cells = +Are child nodes of mxs-ocotp, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example for i.MX28: + + ocotp: ocotp@8002c000 { + compatible = "fsl,imx28-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8002c000 0x2000>; + clocks = <&clks 25>; + status = "okay"; + }; diff --git a/kernel/Documentation/devicetree/bindings/nvmem/nvmem.txt b/kernel/Documentation/devicetree/bindings/nvmem/nvmem.txt new file mode 100644 index 000000000..b52bc11e9 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -0,0 +1,80 @@ += NVMEM(Non Volatile Memory) Data Device Tree Bindings = + +This binding is intended to represent the location of hardware +configuration data stored in NVMEMs like eeprom, efuses and so on. + +On a significant proportion of boards, the manufacturer has stored +some data on NVMEM, for the OS to be able to retrieve these information +and act upon it. Obviously, the OS has to know about where to retrieve +these data from, and where they are stored on the storage device. + +This document is here to document this. + += Data providers = +Contains bindings specific to provider drivers and data cells as children +of this node. + +Optional properties: + read-only: Mark the provider as read only. + += Data cells = +These are the child nodes of the provider which contain data cell +information like offset and size in nvmem provider. + +Required properties: +reg: specifies the offset in byte within the storage device. + +Optional properties: + +bits: Is pair of bit location and number of bits, which specifies offset + in bit and number of bits within the address range specified by reg property. + Offset takes values from 0-7. + +For example: + + /* Provider */ + qfprom: qfprom@00700000 { + ... + + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_calibration_bckp: calib_bckp@504 { + reg = <0x504 0x11>; + bits = <6 128> + }; + + pvs_version: pvs-version@6 { + reg = <0x6 0x2> + bits = <7 2> + }; + + speed_bin: speed-bin@c{ + reg = <0xc 0x1>; + bits = <2 3>; + + }; + ... + }; + += Data consumers = +Are device nodes which consume nvmem data cells/providers. + +Required-properties: +nvmem-cells: list of phandle to the nvmem data cells. +nvmem-cell-names: names for the each nvmem-cells specified. Required if + nvmem-cells is used. + +Optional-properties: +nvmem : list of phandles to nvmem providers. +nvmem-names: names for the each nvmem provider. required if nvmem is used. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/kernel/Documentation/devicetree/bindings/nvmem/qfprom.txt b/kernel/Documentation/devicetree/bindings/nvmem/qfprom.txt new file mode 100644 index 000000000..4ad68b7f5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -0,0 +1,35 @@ += Qualcomm QFPROM device tree bindings = + +This binding is intended to represent QFPROM which is found in most QCOM SOCs. + +Required properties: +- compatible: should be "qcom,qfprom" +- reg: Should contain registers location and length + += Data cells = +Are child nodes of qfprom, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + qfprom: qfprom@00700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x8000>; + ... + /* Data cells */ + tsens_calibration: calib@404 { + reg = <0x4404 0x10>; + }; + }; + + += Data consumers = +Are device nodes which consume nvmem data cells. + +For example: + + tsens { + ... + nvmem-cells = <&tsens_calibration>; + nvmem-cell-names = "calibration"; + }; diff --git a/kernel/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/kernel/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt new file mode 100644 index 000000000..8f86ab3b1 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -0,0 +1,38 @@ += Rockchip eFuse device tree bindings = + +Required properties: +- compatible: Should be "rockchip,rockchip-efuse" +- reg: Should contain the registers location and exact eFuse size +- clocks: Should be the clock id of eFuse +- clock-names: Should be "pclk_efuse" + += Data cells = +Are child nodes of eFuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + efuse: efuse@ffb40000 { + compatible = "rockchip,rockchip-efuse"; + reg = <0xffb40000 0x20>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE256>; + clock-names = "pclk_efuse"; + + /* Data cells */ + cpu_leakage: cpu_leakage { + reg = <0x17 0x1>; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +Example: + + cpu_leakage { + ... + nvmem-cells = <&cpu_leakage>; + nvmem-cell-names = "cpu_leakage"; + }; diff --git a/kernel/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt b/kernel/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt new file mode 100644 index 000000000..56ed481c3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/nvmem/vf610-ocotp.txt @@ -0,0 +1,19 @@ +On-Chip OTP Memory for Freescale Vybrid + +Required Properties: + compatible: + - "fsl,vf610-ocotp" for VF5xx/VF6xx + #address-cells : Should be 1 + #size-cells : Should be 1 + reg : Address and length of OTP controller and fuse map registers + clocks : ipg clock we associate with the OCOTP peripheral + +Example for Vybrid VF5xx/VF6xx: + + ocotp: ocotp@400a5000 { + compatible = "fsl,vf610-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x400a5000 0xCF0>; + clocks = <&clks VF610_CLK_OCOTP>; + }; diff --git a/kernel/Documentation/devicetree/bindings/opp/opp.txt b/kernel/Documentation/devicetree/bindings/opp/opp.txt new file mode 100644 index 000000000..0cb44dc21 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/opp/opp.txt @@ -0,0 +1,465 @@ +Generic OPP (Operating Performance Points) Bindings +---------------------------------------------------- + +Devices work at voltage-current-frequency combinations and some implementations +have the liberty of choosing these. These combinations are called Operating +Performance Points aka OPPs. This document defines bindings for these OPPs +applicable across wide range of devices. For illustration purpose, this document +uses CPU as a device. + +This document contain multiple versions of OPP binding and only one of them +should be used per device. + +Binding 1: operating-points +============================ + +This binding only supports voltage-frequency pairs. + +Properties: +- operating-points: An array of 2-tuples items, and each item consists + of frequency and voltage like <freq-kHz vol-uV>. + freq: clock frequency in kHz + vol: voltage in microvolt + +Examples: + +cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; +}; + + +Binding 2: operating-points-v2 +============================ + +* Property: operating-points-v2 + +Devices supporting OPPs must set their "operating-points-v2" property with +phandle to a OPP table in their DT node. The OPP core will use this phandle to +find the operating points for the device. + +Devices may want to choose OPP tables at runtime and so can provide a list of +phandles here. But only *one* of them should be chosen at runtime. This must be +accompanied by a corresponding "operating-points-names" property, to uniquely +identify the OPP tables. + +If required, this can be extended for SoC vendor specfic bindings. Such bindings +should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt +and should have a compatible description like: "operating-points-v2-<vendor>". + +Optional properties: +- operating-points-names: Names of OPP tables (required if multiple OPP + tables are present), to uniquely identify them. The same list must be present + for all the CPUs which are sharing clock/voltage rails and hence the OPP + tables. + +* OPP Table Node + +This describes the OPPs belonging to a device. This node can have following +properties: + +Required properties: +- compatible: Allow OPPs to express their compatibility. It should be: + "operating-points-v2". + +- OPP nodes: One or more OPP nodes describing voltage-current-frequency + combinations. Their name isn't significant but their phandle can be used to + reference an OPP. + +Optional properties: +- opp-shared: Indicates that device nodes using this OPP Table Node's phandle + switch their DVFS state together, i.e. they share clock/voltage/current lines. + Missing property means devices have independent clock/voltage/current lines, + but they share OPP tables. + +- status: Marks the OPP table enabled/disabled. + + +* OPP Node + +This defines voltage-current-frequency combinations along with other related +properties. + +Required properties: +- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. + +Optional properties: +- opp-microvolt: voltage in micro Volts. + + A single regulator's voltage is specified with an array of size one or three. + Single entry is for target voltage and three entries are for <target min max> + voltages. + + Entries for multiple regulators must be present in the same order as + regulators are specified in device's DT node. + +- opp-microamp: The maximum current drawn by the device in microamperes + considering system specific parameters (such as transients, process, aging, + maximum operating temperature range etc.) as necessary. This may be used to + set the most efficient regulator operating mode. + + Should only be set if opp-microvolt is set for the OPP. + + Entries for multiple regulators must be present in the same order as + regulators are specified in device's DT node. If this property isn't required + for few regulators, then this should be marked as zero for them. If it isn't + required for any regulator, then this property need not be present. + +- clock-latency-ns: Specifies the maximum possible transition latency (in + nanoseconds) for switching to this OPP from any other OPP. + +- turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is + available on some platforms, where the device can run over its operating + frequency for a short duration of time limited by the device's power, current + and thermal limits. + +- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in + the table should have this. + +- status: Marks the node enabled/disabled. + +Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu0_opp_table>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <970000 975000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp01 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <980000 1000000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp02 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <290000>; + turbo-mode; + }; + }; +}; + +Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states +independently. + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@1 { + compatible = "qcom,krait"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@2 { + compatible = "qcom,krait"; + reg = <2>; + next-level-cache = <&L2>; + clocks = <&clk_controller 2>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply2>; + operating-points-v2 = <&cpu_opp_table>; + }; + + cpu@3 { + compatible = "qcom,krait"; + reg = <3>; + next-level-cache = <&L2>; + clocks = <&clk_controller 3>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply3>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + cpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + /* + * Missing opp-shared property means CPUs switch DVFS states + * independently. + */ + + opp00 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <970000 975000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp01 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <980000 1000000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp02 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + opp-microamp = <90000; + lock-latency-ns = <290000>; + turbo-mode; + }; + }; +}; + +Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch +DVFS state together. + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + reg = <0>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + reg = <1>; + next-level-cache = <&L2>; + clocks = <&clk_controller 0>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply0>; + operating-points-v2 = <&cluster0_opp>; + }; + + cpu@100 { + compatible = "arm,cortex-a15"; + reg = <100>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cluster1_opp>; + }; + + cpu@101 { + compatible = "arm,cortex-a15"; + reg = <101>; + next-level-cache = <&L2>; + clocks = <&clk_controller 1>; + clock-names = "cpu"; + cpu-supply = <&cpu_supply1>; + operating-points-v2 = <&cluster1_opp>; + }; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <970000 975000 985000>; + opp-microamp = <70000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp01 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <980000 1000000 1010000>; + opp-microamp = <80000>; + clock-latency-ns = <310000>; + }; + opp02 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1025000>; + opp-microamp = <90000>; + clock-latency-ns = <290000>; + turbo-mode; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp10 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1045000 1050000 1055000>; + opp-microamp = <95000>; + clock-latency-ns = <400000>; + opp-suspend; + }; + opp11 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1075000>; + opp-microamp = <100000>; + clock-latency-ns = <400000>; + }; + opp12 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1010000 1100000 1110000>; + opp-microamp = <95000>; + clock-latency-ns = <400000>; + turbo-mode; + }; + }; +}; + +Example 4: Handling multiple regulators + +/ { + cpus { + cpu@0 { + compatible = "arm,cortex-a7"; + ... + + cpu-supply = <&cpu_supply0>, <&cpu_supply1>, <&cpu_supply2>; + operating-points-v2 = <&cpu0_opp_table>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <970000>, /* Supply 0 */ + <960000>, /* Supply 1 */ + <960000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <70000>, /* Supply 1 */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + + /* OR */ + + opp00 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <970000 975000 985000>, /* Supply 0 */ + <960000 965000 975000>, /* Supply 1 */ + <960000 965000 975000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <70000>, /* Supply 1 */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + + /* OR */ + + opp00 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <970000 975000 985000>, /* Supply 0 */ + <960000 965000 975000>, /* Supply 1 */ + <960000 965000 975000>; /* Supply 2 */ + opp-microamp = <70000>, /* Supply 0 */ + <0>, /* Supply 1 doesn't need this */ + <70000>; /* Supply 2 */ + clock-latency-ns = <300000>; + }; + }; +}; + +Example 5: Multiple OPP tables + +/ { + cpus { + cpu@0 { + compatible = "arm,cortex-a7"; + ... + + cpu-supply = <&cpu_supply> + operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>; + operating-points-names = "slow", "fast"; + }; + }; + + cpu0_opp_table_slow: opp_table_slow { + compatible = "operating-points-v2"; + status = "okay"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <600000000>; + ... + }; + + opp01 { + opp-hz = /bits/ 64 <800000000>; + ... + }; + }; + + cpu0_opp_table_fast: opp_table_fast { + compatible = "operating-points-v2"; + status = "okay"; + opp-shared; + + opp10 { + opp-hz = /bits/ 64 <1000000000>; + ... + }; + + opp11 { + opp-hz = /bits/ 64 <1100000000>; + ... + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt new file mode 100644 index 000000000..09cd3bc4d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt @@ -0,0 +1,28 @@ +* Altera PCIe MSI controller + +Required properties: +- compatible: should contain "altr,msi-1.0" +- reg: specifies the physical base address of the controller and + the length of the memory mapped region. +- reg-names: must include the following entries: + "csr": CSR registers + "vector_slave": vectors slave port region +- interrupt-parent: interrupt source phandle. +- interrupts: specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. +- num-vectors: number of vectors, range 1 to 32. +- msi-controller: indicates that this is MSI controller node + + +Example +msi0: msi@0xFF200000 { + compatible = "altr,msi-1.0"; + reg = <0xFF200000 0x00000010 + 0xFF200010 0x00000080>; + reg-names = "csr", "vector_slave"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 42 4>; + msi-controller; + num-vectors = <32>; +}; diff --git a/kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt new file mode 100644 index 000000000..2951a6a50 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/altera-pcie.txt @@ -0,0 +1,49 @@ +* Altera PCIe controller + +Required properties: +- compatible : should contain "altr,pcie-root-port-1.0" +- reg: a list of physical base address and length for TXS and CRA. +- reg-names: must include the following entries: + "Txs": TX slave port region + "Cra": Control register access region +- interrupt-parent: interrupt source phandle. +- interrupts: specifies the interrupt source of the parent interrupt controller. + The format of the interrupt specifier depends on the parent interrupt + controller. +- device_type: must be "pci" +- #address-cells: set to <3> +- #size-cells: set to <2> +- #interrupt-cells: set to <1> +- ranges: describes the translation of addresses for root ports and standard + PCI regions. +- interrupt-map-mask and interrupt-map: standard PCI properties to define the + mapping of the PCIe interface to interrupt numbers. + +Optional properties: +- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe + controller. +- bus-range: PCI bus numbers covered + +Example + pcie_0: pcie@0xc00000000 { + compatible = "altr,pcie-root-port-1.0"; + reg = <0xc0000000 0x20000000>, + <0xff220000 0x00004000>; + reg-names = "Txs", "Cra"; + interrupt-parent = <&hps_0_arm_gic_0>; + interrupts = <0 40 4>; + interrupt-controller; + #interrupt-cells = <1>; + bus-range = <0x0 0xFF>; + device_type = "pci"; + msi-parent = <&msi_to_gic_gen_0>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_0 1>, + <0 0 0 2 &pcie_0 2>, + <0 0 0 3 &pcie_0 3>, + <0 0 0 4 &pcie_0 4>; + ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000 + 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt new file mode 100644 index 000000000..f7514c170 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/arm,juno-r1-pcie.txt @@ -0,0 +1,10 @@ +* ARM Juno R1 PCIe interface + +This PCIe host controller is based on PLDA XpressRICH3-AXI IP +and thus inherits all the common properties defined in plda,xpressrich3-axi.txt +as well as the base properties defined in host-generic-pci.txt. + +Required properties: + - compatible: "arm,juno-r1-pcie" + - dma-coherent: The host controller bridges the AXI transactions into PCIe bus + in a manner that makes the DMA operations to appear coherent to the CPUs. diff --git a/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt index f7ce50e38..45c2a8094 100644 --- a/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ b/kernel/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -17,6 +17,21 @@ Optional properties: - phys: phandle of the PCIe PHY device - phy-names: must be "pcie-phy" +- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done +by the ASIC after power on reset. In this case, SW needs to configure it + +If the brcm,pcie-ob property is present, the following properties become +effective: + +Required: +- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal +address used by the iProc PCIe core (not the PCIe address) +- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) + +Optional: +- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to +increase the outbound window size + Example: pcie0: pcie@18012000 { compatible = "brcm,iproc-pcie"; @@ -38,6 +53,11 @@ Example: phys = <&phy 0 5>; phy-names = "pcie-phy"; + + brcm,pcie-ob; + brcm,pcie-ob-oarr-size; + brcm,pcie-ob-axi-offset = <0x00000000>; + brcm,pcie-ob-window-size = <256>; }; pcie1: pcie@18013000 { diff --git a/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt index 9f4faa8e8..5b0853df9 100644 --- a/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/kernel/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -15,14 +15,16 @@ Required properties: to define the mapping of the PCIe interface to interrupt numbers. - num-lanes: number of lanes to use -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - "pcie" - - "pcie_bus" Optional properties: +- num-lanes: number of lanes to use (this property should be specified unless + the link is brought already up in BIOS) - reset-gpio: gpio pin number of power good signal - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to specify this property, to keep backwards compatibility a range of 0x00-0xff is assumed if not present) +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - "pcie" + - "pcie_bus" diff --git a/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt new file mode 100644 index 000000000..17c6ed9c6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -0,0 +1,44 @@ +HiSilicon PCIe host bridge DT description + +HiSilicon PCIe host controller is based on Designware PCI core. +It shares common functions with PCIe Designware core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pci.txt. + +Additional properties are described here: + +Required properties: +- compatible: Should contain "hisilicon,hip05-pcie". +- reg: Should contain rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "rc_dbi": controller configuration registers; + "config": PCIe configuration space registers. +- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. +- port-id: Should be 0, 1, 2 or 3. + +Optional properties: +- status: Either "ok" or "disabled". +- dma-coherent: Present if DMA operations are coherent. + +Example: + pcie@0xb0080000 { + compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; + reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; + reg-names = "rc_dbi", "config"; + bus-range = <0 15>; + msi-parent = <&its_pcie>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; + num-lanes = <8>; + port-id = <1>; + #interrupts-cells = <1>; + interrupts-map-mask = <0xf800 0 0 7>; + interrupts-map = <0x0 0 0 1 &mbigen_pcie 1 10 + 0x0 0 0 2 &mbigen_pcie 2 11 + 0x0 0 0 3 &mbigen_pcie 3 12 + 0x0 0 0 4 &mbigen_pcie 4 13>; + status = "ok"; + }; diff --git a/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt b/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt index cf3e205e0..3f1d3fca6 100644 --- a/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt +++ b/kernel/Documentation/devicetree/bindings/pci/host-generic-pci.txt @@ -34,8 +34,9 @@ Properties of the host controller node: - #size-cells : Must be 2. - reg : The Configuration Space base address and size, as accessed - from the parent bus. - + from the parent bus. The base address corresponds to + the first bus in the "bus-range" property. If no + "bus-range" is specified, this will be bus 0 (the default). Properties of the /chosen node: diff --git a/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt index 6286f049b..e3767857d 100644 --- a/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/kernel/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -1,10 +1,20 @@ Freescale Layerscape PCIe controller -This PCIe host controller is based on the Synopsis Designware PCIe IP +This PCIe host controller is based on the Synopsys DesignWare PCIe IP and thus inherits all the common properties defined in designware-pcie.txt. +This controller derives its clocks from the Reset Configuration Word (RCW) +which is used to describe the PLL settings at the time of chip-reset. + +Also as per the available Reference Manuals, there is no specific 'version' +register available in the Freescale PCIe controller register set, +which can allow determining the underlying DesignWare PCIe controller version +information. + Required properties: -- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie" +- compatible: should contain the platform identifier such as: + "fsl,ls1021a-pcie", "snps,dw-pcie" + "fsl,ls2080a-pcie", "snps,dw-pcie" - reg: base addresses and lengths of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/kernel/Documentation/devicetree/bindings/pci/pci-msi.txt b/kernel/Documentation/devicetree/bindings/pci/pci-msi.txt new file mode 100644 index 000000000..9b3cc817d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/pci-msi.txt @@ -0,0 +1,220 @@ +This document describes the generic device tree binding for describing the +relationship between PCI devices and MSI controllers. + +Each PCI device under a root complex is uniquely identified by its Requester ID +(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and +Function number. + +For the purpose of this document, when treated as a numeric value, a RID is +formatted such that: + +* Bits [15:8] are the Bus number. +* Bits [7:3] are the Device number. +* Bits [2:0] are the Function number. +* Any other bits required for padding must be zero. + +MSIs may be distinguished in part through the use of sideband data accompanying +writes. In the case of PCI devices, this sideband data may be derived from the +Requester ID. A mechanism is required to associate a device with both the MSI +controllers it can address, and the sideband data that will be associated with +its writes to those controllers. + +For generic MSI bindings, see +Documentation/devicetree/bindings/interrupt-controller/msi.txt. + + +PCI root complex +================ + +Optional properties +------------------- + +- msi-map: Maps a Requester ID to an MSI controller and associated + msi-specifier data. The property is an arbitrary number of tuples of + (rid-base,msi-controller,msi-base,length), where: + + * rid-base is a single cell describing the first RID matched by the entry. + + * msi-controller is a single phandle to an MSI controller + + * msi-base is an msi-specifier describing the msi-specifier produced for the + first RID matched by the entry. + + * length is a single cell describing how many consecutive RIDs are matched + following the rid-base. + + Any RID r in the interval [rid-base, rid-base + length) is associated with + the listed msi-controller, with the msi-specifier (r - rid-base + msi-base). + +- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped + to an msi-specifier per the msi-map property. + +- msi-parent: Describes the MSI parent of the root complex itself. Where + the root complex and MSI controller do not pass sideband data with MSI + writes, this property may be used to describe the MSI controller(s) + used by PCI devices under the root complex, if defined as such in the + binding for the root complex. + + +Example (1) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, identity-mapped. + */ + msi-map = <0x0 &msi_a 0x0 0x10000>, + }; +}; + + +Example (2) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, masked to only the device and function bits. + */ + msi-map = <0x0 &msi_a 0x0 0x100>, + msi-map-mask = <0xff> + }; +}; + + +Example (3) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, but the high bit of the bus number is + * ignored. + */ + msi-map = <0x0000 &msi 0x0000 0x8000>, + <0x8000 &msi 0x0000 0x8000>; + }; +}; + + +Example (4) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@f { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to the MSI controller is + * the RID, but the high bit of the bus number is + * negated. + */ + msi-map = <0x0000 &msi 0x8000 0x8000>, + <0x8000 &msi 0x0000 0x8000>; + }; +}; + + +Example (5) +=========== + +/ { + #address-cells = <1>; + #size-cells = <1>; + + msi_a: msi-controller@a { + reg = <0xa 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + msi_b: msi-controller@b { + reg = <0xb 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + msi_c: msi-controller@c { + reg = <0xc 0x1>; + compatible = "vendor,some-controller"; + msi-controller; + #msi-cells = <1>; + }; + + pci: pci@c { + reg = <0xf 0x1>; + compatible = "vendor,pcie-root-complex"; + device_type = "pci"; + + /* + * The sideband data provided to MSI controller a is the + * RID, but the high bit of the bus number is negated. + * The sideband data provided to MSI controller b is the + * RID, identity-mapped. + * MSI controller c is not addressable. + */ + msi-map = <0x0000 &msi_a 0x8000 0x08000>, + <0x8000 &msi_a 0x0000 0x08000>, + <0x0000 &msi_b 0x0000 0x10000>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index d8ef5bf50..7fab84b33 100644 --- a/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/kernel/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -7,7 +7,8 @@ OHCI and EHCI controllers. Required properties: - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC; - "renesas,pci-r8a7791" for the R8A7791 SoC. + "renesas,pci-r8a7791" for the R8A7791 SoC; + "renesas,pci-r8a7794" for the R8A7794 SoC. - reg: A list of physical regions to access the device: the first is the operational registers for the OHCI/EHCI controllers and the second is for the bridge configuration and control registers. diff --git a/kernel/Documentation/devicetree/bindings/pci/pci.txt b/kernel/Documentation/devicetree/bindings/pci/pci.txt index f8fbe9af7..08dcfad09 100644 --- a/kernel/Documentation/devicetree/bindings/pci/pci.txt +++ b/kernel/Documentation/devicetree/bindings/pci/pci.txt @@ -1,12 +1,12 @@ PCI bus bridges have standardized Device Tree bindings: PCI Bus Binding to: IEEE Std 1275-1994 -http://www.openfirmware.org/ofwg/bindings/pci/pci2_1.pdf +http://www.firmware.org/1275/bindings/pci/pci2_1.pdf And for the interrupt mapping part: Open Firmware Recommended Practice: Interrupt Mapping -http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf +http://www.firmware.org/1275/practice/imap/imap0_9d.pdf Additionally to the properties specified in the above standards a host bridge driver implementation may support the following properties: diff --git a/kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt b/kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt new file mode 100644 index 000000000..f3f75bfb4 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi.txt @@ -0,0 +1,12 @@ +* PLDA XpressRICH3-AXI host controller + +The PLDA XpressRICH3-AXI host controller can be configured in a manner that +makes it compliant with the SBSA[1] standard published by ARM Ltd. For those +scenarios, the host-generic-pci.txt bindings apply with the following additions +to the compatible property: + +Required properties: + - compatible: should contain "plda,xpressrich3-axi" to identify the IP used. + + +[1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/ diff --git a/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt b/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt index 3d217911b..60e25161f 100644 --- a/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt +++ b/kernel/Documentation/devicetree/bindings/pci/ti-pci.txt @@ -23,6 +23,9 @@ PCIe Designware Controller interrupt-map-mask, interrupt-map : as specified in ../designware-pcie.txt +Optional Property: + - gpios : Should be added if a gpio line is required to drive PERST# line + Example: axi { compatible = "simple-bus"; diff --git a/kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt new file mode 100644 index 000000000..36d881c8e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt @@ -0,0 +1,68 @@ +* AppliedMicro X-Gene v1 PCIe MSI controller + +Required properties: + +- compatible: should be "apm,xgene1-msi" to identify + X-Gene v1 PCIe MSI controller block. +- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node +- reg: physical base address (0x79000000) and length (0x900000) for controller + registers. These registers include the MSI termination address and data + registers as well as the MSI interrupt status registers. +- reg-names: not required +- interrupts: A list of 16 interrupt outputs of the controller, starting from + interrupt number 0x10 to 0x1f. +- interrupt-names: not required + +Each PCIe node needs to have property msi-parent that points to msi controller node + +Examples: + +SoC DTSI: + + + MSI node: + msi@79000000 { + compatible = "apm,xgene1-msi"; + msi-controller; + reg = <0x00 0x79000000 0x0 0x900000>; + interrupts = <0x0 0x10 0x4> + <0x0 0x11 0x4> + <0x0 0x12 0x4> + <0x0 0x13 0x4> + <0x0 0x14 0x4> + <0x0 0x15 0x4> + <0x0 0x16 0x4> + <0x0 0x17 0x4> + <0x0 0x18 0x4> + <0x0 0x19 0x4> + <0x0 0x1a 0x4> + <0x0 0x1b 0x4> + <0x0 0x1c 0x4> + <0x0 0x1d 0x4> + <0x0 0x1e 0x4> + <0x0 0x1f 0x4>; + }; + + + PCIe controller node with msi-parent property pointing to MSI node: + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + msi-parent= <&msi>; + }; diff --git a/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt index 3e2c88d97..02f979a48 100644 --- a/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt +++ b/kernel/Documentation/devicetree/bindings/pci/xilinx-pcie.txt @@ -58,5 +58,5 @@ Example: interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; - } + }; }; diff --git a/kernel/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt b/kernel/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt new file mode 100644 index 000000000..7f81ef901 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/phy/brcm,brcmstb-sata-phy.txt @@ -0,0 +1,40 @@ +* Broadcom SATA3 PHY for STB + +Required properties: +- compatible: should be one or more of + "brcm,bcm7445-sata-phy" + "brcm,phy-sata3" +- address-cells: should be 1 +- size-cells: should be 0 +- reg: register range for the PHY PCB interface +- reg-names: should be "phy" + +Sub-nodes: + Each port's PHY should be represented as a sub-node. + +Sub-nodes required properties: +- reg: the PHY number +- phy-cells: generic PHY binding; must be 0 +Optional: +- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port + + +Example: + + sata-phy@f0458100 { + compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; + reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + + sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/kernel/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt new file mode 100644 index 000000000..761c4bc24 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt @@ -0,0 +1,47 @@ +Broadcom Cygnus PCIe PHY + +Required properties: +- compatible: must be "brcm,cygnus-pcie-phy" +- reg: base address and length of the PCIe PHY block +- #address-cells: must be 1 +- #size-cells: must be 0 + +Each PCIe PHY should be represented by a child node + +Required properties For the child node: +- reg: the PHY ID +0 - PCIe RC 0 +1 - PCIe RC 1 +- #phy-cells: must be 0 + +Example: + pcie_phy: phy@0301d0a0 { + compatible = "brcm,cygnus-pcie-phy"; + reg = <0x0301d0a0 0x14>; + + pcie0_phy: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + pcie1_phy: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; + + /* users of the PCIe phy */ + + pcie0: pcie@18012000 { + ... + ... + phys = <&pcie0_phy>; + phy-names = "pcie-phy"; + }; + + pcie1: pcie@18013000 { + ... + ... + phys = <pcie1_phy>; + phy-names = "pcie-phy"; + }; diff --git a/kernel/Documentation/devicetree/bindings/arm/calxeda/combophy.txt b/kernel/Documentation/devicetree/bindings/phy/calxeda-combophy.txt index 6622bdb2e..6622bdb2e 100644 --- a/kernel/Documentation/devicetree/bindings/arm/calxeda/combophy.txt +++ b/kernel/Documentation/devicetree/bindings/phy/calxeda-combophy.txt diff --git a/kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt b/kernel/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt index f37b3a863..f37b3a863 100644 --- a/kernel/Documentation/devicetree/bindings/usb/keystone-phy.txt +++ b/kernel/Documentation/devicetree/bindings/phy/keystone-usb-phy.txt diff --git a/kernel/Documentation/devicetree/bindings/usb/mxs-phy.txt b/kernel/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 379b84a56..379b84a56 100644 --- a/kernel/Documentation/devicetree/bindings/usb/mxs-phy.txt +++ b/kernel/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt diff --git a/kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/kernel/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt index a9aa79fb9..a9aa79fb9 100644 --- a/kernel/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt +++ b/kernel/Documentation/devicetree/bindings/phy/nvidia,tegra20-usb-phy.txt diff --git a/kernel/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt b/kernel/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt new file mode 100644 index 000000000..bd61b467e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/phy/phy-lpc18xx-usb-otg.txt @@ -0,0 +1,26 @@ +NXP LPC18xx/43xx internal USB OTG PHY binding +--------------------------------------------- + +This file contains documentation for the internal USB OTG PHY found +in NXP LPC18xx and LPC43xx SoCs. + +Required properties: +- compatible : must be "nxp,lpc1850-usb-otg-phy" +- clocks : must be exactly one entry +See: Documentation/devicetree/bindings/clock/clock-bindings.txt +- #phy-cells : must be 0 for this phy +See: Documentation/devicetree/bindings/phy/phy-bindings.txt + +The phy node must be a child of the creg syscon node. + +Example: +creg: syscon@40043000 { + compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; + reg = <0x40043000 0x1000>; + + usb0_otg_phy: phy@004 { + compatible = "nxp,lpc1850-usb-otg-phy"; + clocks = <&ccu1 CLK_USB0>; + #phy-cells = <0>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/kernel/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt new file mode 100644 index 000000000..00100cf3e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt @@ -0,0 +1,68 @@ +mt65xx USB3.0 PHY binding +-------------------------- + +This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC. + +Required properties (controller (parent) node): + - compatible : should be "mediatek,mt8173-u3phy" + - reg : offset and length of register for phy, exclude port's + register. + - clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names + - clock-names : must contain + "u3phya_ref": for reference clock of usb3.0 analog phy. + +Required nodes : a sub-node is required for each port the controller + provides. Address range information including the usual + 'reg' property is used inside these nodes to describe + the controller's topology. + +Required properties (port (child) node): +- reg : address and length of the register set for the port. +- #phy-cells : should be 1 (See second example) + cell after port phandle is phy type from: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + +Example: + +u3phy: usb-phy@11290000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0 0x11290000 0 0x800>; + clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "u3phya_ref"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "okay"; + + phy_port0: port@11290800 { + reg = <0 0x11290800 0 0x800>; + #phy-cells = <1>; + status = "okay"; + }; + + phy_port1: port@11291000 { + reg = <0 0x11291000 0 0x800>; + #phy-cells = <1>; + status = "okay"; + }; +}; + +Specifying phy control of devices +--------------------------------- + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the phy port node and a device type; +phy-names for each port are optional. + +Example: + +#include <dt-bindings/phy/phy.h> + +usb30: usb@11270000 { + ... + phys = <&phy_port0 PHY_TYPE_USB3>; + phy-names = "usb3-0"; + ... +}; diff --git a/kernel/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt b/kernel/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt new file mode 100644 index 000000000..afbc7e24a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/phy/pistachio-usb-phy.txt @@ -0,0 +1,29 @@ +IMG Pistachio USB PHY +===================== + +Required properties: +-------------------- + - compatible: Must be "img,pistachio-usb-phy". + - #phy-cells: Must be 0. See ./phy-bindings.txt for details. + - clocks: Must contain an entry for each entry in clock-names. + See ../clock/clock-bindings.txt for details. + - clock-names: Must include "usb_phy". + - img,cr-top: Must constain a phandle to the CR_TOP syscon node. + - img,refclk: Indicates the reference clock source for the USB PHY. + See <dt-bindings/phy/phy-pistachio-usb.h> for a list of valid values. + +Optional properties: +-------------------- + - phy-supply: USB VBUS supply. Must supply 5.0V. + +Example: +-------- +usb_phy: usb-phy { + compatible = "img,pistachio-usb-phy"; + clocks = <&clk_core CLK_USB_PHY>; + clock-names = "usb_phy"; + phy-supply = <&usb_vbus>; + img,refclk = <REFCLK_CLK_CORE>; + img,cr-top = <&cr_top>; + #phy-cells = <0>; +}; diff --git a/kernel/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt b/kernel/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt new file mode 100644 index 000000000..660a13ca9 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt @@ -0,0 +1,18 @@ +* Marvell PXA1928 USB and HSIC PHYs + +Required properties: +- compatible: "marvell,pxa1928-usb-phy" or "marvell,pxa1928-hsic-phy" +- reg: base address and length of the registers +- clocks - A single clock. From common clock binding. +- #phys-cells: should be 0. From commmon phy binding. +- resets: reference to the reset controller + +Example: + + usbphy: phy@7000 { + compatible = "marvell,pxa1928-usb-phy"; + reg = <0x7000 0xe0>; + clocks = <&apmu_clocks PXA1928_CLK_USB>; + #phy-cells = <0>; + }; + diff --git a/kernel/Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt b/kernel/Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt new file mode 100644 index 000000000..2cb2168ce --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/phy/qcom,usb-8x16-phy.txt @@ -0,0 +1,76 @@ +Qualcomm's APQ8016/MSM8916 USB transceiver controller + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain "qcom,usb-8x16-phy". + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: USB PHY base address and length of the register map + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: See clock-bindings.txt section "consumers". List of + two clock specifiers for interface and core controller + clocks. + +- clock-names: + Usage: required + Value type: <string> + Definition: Must contain "iface" and "core" strings. + +- vddcx-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the regulator VDCCX supply node. + +- v1p8-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the regulator 1.8V supply node. + +- v3p3-supply: + Usage: required + Value type: <phandle> + Definition: phandle to the regulator 3.3V supply node. + +- resets: + Usage: required + Value type: <prop-encoded-array> + Definition: See reset.txt section "consumers". PHY reset specifier. + +- reset-names: + Usage: required + Value type: <string> + Definition: Must contain "phy" string. + +- switch-gpio: + Usage: optional + Value type: <prop-encoded-array> + Definition: Some boards are using Dual SPDT USB Switch, witch is + controlled by GPIO to de/multiplex D+/D- USB lines + between connectors. + +Example: + usb_phy: phy@78d9000 { + compatible = "qcom,usb-8x16-phy"; + reg = <0x78d9000 0x400>; + + vddcx-supply = <&pm8916_s1_corner>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + + resets = <&gcc GCC_USB2A_PHY_BCR>; + reset-names = "phy"; + + // D+/D- lines: 1 - Routed to HUB, 0 - Device connector + switch-gpio = <&pm8916_gpios 4 GPIO_ACTIVE_HIGH>; + }; + diff --git a/kernel/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/kernel/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index 00fc52a03..d564ba4f1 100644 --- a/kernel/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/kernel/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -6,6 +6,7 @@ This file provides information on what the device node for the R-Car generation Required properties: - compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. + "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. - reg: offset and length of the register block. - #address-cells: number of address cells for the USB channel subnodes, must be <1>. diff --git a/kernel/Documentation/devicetree/bindings/phy/samsung-phy.txt b/kernel/Documentation/devicetree/bindings/phy/samsung-phy.txt index 60c6f2a63..0289d3b07 100644 --- a/kernel/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/kernel/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -44,6 +44,9 @@ Required properties: - the "ref" clock is used to get the rate of the clock provided to the PHY module +Optional properties: +- vbus-supply: power-supply phandle for vbus power source + The first phandle argument in the PHY specifier identifies the PHY, its meaning is compatible dependent. For the currently supported SoCs (Exynos 4210 and Exynos 4212) it is as follows: diff --git a/kernel/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/kernel/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 16528b9eb..0cebf7454 100644 --- a/kernel/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/kernel/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -7,6 +7,8 @@ Required properties: * allwinner,sun5i-a13-usb-phy * allwinner,sun6i-a31-usb-phy * allwinner,sun7i-a20-usb-phy + * allwinner,sun8i-a23-usb-phy + * allwinner,sun8i-a33-usb-phy - reg : a list of offset + length pairs - reg-names : * "phy_ctrl" @@ -17,12 +19,21 @@ Required properties: - clock-names : * "usb_phy" for sun4i, sun5i or sun7i * "usb0_phy", "usb1_phy" and "usb2_phy" for sun6i + * "usb0_phy", "usb1_phy" for sun8i - resets : a list of phandle + reset specifier pairs - reset-names : * "usb0_reset" * "usb1_reset" * "usb2_reset" for sun4i, sun6i or sun7i +Optional properties: +- usb0_id_det-gpios : gpio phandle for reading the otg id pin value +- usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus +- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect +- usb0_vbus-supply : regulator phandle for controller usb0 vbus +- usb1_vbus-supply : regulator phandle for controller usb1 vbus +- usb2_vbus-supply : regulator phandle for controller usb2 vbus + Example: usbphy: phy@0x01c13400 { #phy-cells = <1>; @@ -32,6 +43,13 @@ Example: reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>, <&usb_clk 2>; - reset-names = "usb1_reset", "usb2_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ + usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; }; diff --git a/kernel/Documentation/devicetree/bindings/phy/ti-phy.txt b/kernel/Documentation/devicetree/bindings/phy/ti-phy.txt index 305e3df3d..9cf9446ea 100644 --- a/kernel/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/kernel/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -82,6 +82,9 @@ Optional properties: - id: If there are multiple instance of the same type, in order to differentiate between each instance "id" can be used (e.g., multi-lane PCIe PHY). If "id" is not provided, it is set to default value of '1'. + - syscon-pllreset: Handle to system control region that contains the + CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0 + register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy. This is usually a subnode of ocp2scp to which it is connected. @@ -100,3 +103,16 @@ usb3phy@4a084400 { "sysclk", "refclk"; }; + +sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>, <&sata_ref_clk>; + clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; + #phy-cells = <0>; +}; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index fdd8046e6..b321b2678 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -16,6 +16,9 @@ Required properties: "allwinner,sun7i-a20-pinctrl" "allwinner,sun8i-a23-pinctrl" "allwinner,sun8i-a23-r-pinctrl" + "allwinner,sun8i-a33-pinctrl" + "allwinner,sun8i-a83t-pinctrl" + - reg: Should contain the register physical address and length for the pin controller. @@ -46,7 +49,7 @@ Optional subnode-properties: Examples: -pinctrl@01c20800 { +pio: pinctrl@01c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; #address-cells = <1>; @@ -66,3 +69,38 @@ pinctrl@01c20800 { allwinner,pull = <0>; }; }; + + +GPIO and interrupt controller +----------------------------- + +This hardware also acts as a GPIO controller and an interrupt +controller. + +Consumers that would want to refer to one or the other (or both) +should provide through the usual *-gpios and interrupts properties a +cell with 3 arguments, first the number of the bank, then the pin +inside that bank, and finally the flags for the GPIO/interrupts. + +Example: + +xio: gpio@38 { + compatible = "nxp,pcf8574a"; + reg = <0x38>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&pio>; + interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; +}; + +reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; +}; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt new file mode 100644 index 000000000..61ac75706 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt @@ -0,0 +1,90 @@ +* Atmel PIO4 Controller + +The Atmel PIO4 controller is used to select the function of a pin and to +configure it. + +Required properties: +- compatible: "atmel,sama5d2-pinctrl". +- reg: base address and length of the PIO controller. +- interrupts: interrupt outputs from the controller, one for each bank. +- interrupt-controller: mark the device node as an interrupt controller. +- #interrupt-cells: should be two. +- gpio-controller: mark the device node as a gpio controller. +- #gpio-cells: should be two. + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices. + +Subnode format +Each node (or subnode) will list the pins it needs and how to configured these +pins. + + node { + pinmux = <PIN_NUMBER_PINMUX>; + GENERIC_PINCONFIG; + }; + +Required properties: +- pinmux: integer array. Each integer represents a pin number plus mux and +ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the +right representation of the pin. + +Optional properties: +- GENERIC_PINCONFIG: generic pinconfig options to use, bias-disable, +bias-pull-down, bias-pull-up, drive-open-drain, input-schmitt-enable, +input-debounce, output-low, output-high. + +Example: + +#include <sama5d2-pinfunc.h> + +... +{ + pioA: pinctrl@fc038000 { + compatible = "atmel,sama5d2-pinctrl"; + reg = <0xfc038000 0x600>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>, + <68 IRQ_TYPE_LEVEL_HIGH 7>, + <69 IRQ_TYPE_LEVEL_HIGH 7>, + <70 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&pioA_clk>; + + pinctrl_i2c0_default: i2c0_default { + pinmux = <PIN_PD21__TWD0>, + <PIN_PD22__TWCK0>; + bias-disable; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PB0>, + <PIN_PB5>; + bias-pull-up; + }; + + pinctrl_sdmmc1_default: sdmmc1_default { + cmd_data { + pinmux = <PIN_PA28__SDMMC1_CMD>, + <PIN_PA18__SDMMC1_DAT0>, + <PIN_PA19__SDMMC1_DAT1>, + <PIN_PA20__SDMMC1_DAT2>, + <PIN_PA21__SDMMC1_DAT3>; + bias-pull-up; + }; + + ck_cd { + pinmux = <PIN_PA22__SDMMC1_CK>, + <PIN_PA30__SDMMC1_CD>; + bias-disable; + }; + }; + ... + }; +}; +... diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt new file mode 100644 index 000000000..f8fa28ce1 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt @@ -0,0 +1,46 @@ +* Pin-controller driver for the Marvell Berlin SoCs + +Pin control registers are part of both chip controller and system +controller register sets. Pin controller nodes should be a sub-node of +either the chip controller or system controller node. The pins +controlled are organized in groups, so no actual pin information is +needed. + +A pin-controller node should contain subnodes representing the pin group +configurations, one per function. Each subnode has the group name and +the muxing function used. + +Be aware the Marvell Berlin datasheets use the keyword 'mode' for what +is called a 'function' in the pin-controller subsystem. + +Required properties: +- compatible: should be one of: + "marvell,berlin2-soc-pinctrl", + "marvell,berlin2-system-pinctrl", + "marvell,berlin2cd-soc-pinctrl", + "marvell,berlin2cd-system-pinctrl", + "marvell,berlin2q-soc-pinctrl", + "marvell,berlin2q-system-pinctrl", + "marvell,berlin4ct-avio-pinctrl", + "marvell,berlin4ct-soc-pinctrl", + "marvell,berlin4ct-system-pinctrl" + +Required subnode-properties: +- groups: a list of strings describing the group names. +- function: a string describing the function used to mux the groups. + +Example: + +sys_pinctrl: pin-controller { + compatible = "marvell,berlin2q-system-pinctrl"; + + uart0_pmux: uart0-pmux { + groups = "GSM12"; + function = "uart0"; + }; +}; + +&uart0 { + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; +}; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/kernel/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt index 6540ca56b..16589fb6f 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt @@ -3,8 +3,8 @@ Broadcom Cygnus GPIO/PINCONF Controller Required properties: - compatible: - Must be "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio", or - "brcm,cygnus-crmu-gpio" + Must be "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio", + "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio" - reg: Define the base and range of the I/O address space that contains the Cygnus @@ -26,9 +26,13 @@ Optional properties: - interrupt-controller: Specifies that the node is an interrupt controller -- pinmux: - Specifies the phandle to the IOMUX device, where pins can be individually -muxed to GPIO +- gpio-ranges: + Specifies the mapping between gpio controller and pin-controllers pins. + This requires 4 fields in cells defined as - + 1. Phandle of pin-controller. + 2. GPIO base pin offset. + 3 Pin-control base pin offset. + 4. number of gpio pins which are linearly mapped from pin base. Supported generic PINCONF properties in child nodes: @@ -78,6 +82,8 @@ Example: gpio-controller; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; + gpio-ranges = <&pinctrl 0 42 1>, + <&pinctrl 1 44 3>; }; /* diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt new file mode 100644 index 000000000..23ce8dc26 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt @@ -0,0 +1,86 @@ +Conexant Digicolor CX92755 General Purpose Pin Mapping + +This document describes the device tree binding of the pin mapping hardware +modules in the Conexant Digicolor CX92755 SoCs. The CX92755 in one of the +Digicolor series of SoCs. + +=== Pin Controller Node === + +Required Properties: + +- compatible: Must be "cnxt,cx92755-pinctrl" +- reg: Base address of the General Purpose Pin Mapping register block and the + size of the block. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Must be <2>. The first cell is the pin number and the + second cell is used to specify flags. See include/dt-bindings/gpio/gpio.h + for possible values. + +For example, the following is the bare minimum node: + + pinctrl: pinctrl@f0000e20 { + compatible = "cnxt,cx92755-pinctrl"; + reg = <0xf0000e20 0x100>; + gpio-controller; + #gpio-cells = <2>; + }; + +As a pin controller device, in addition to the required properties, this node +should also contain the pin configuration nodes that client devices reference, +if any. + +For a general description of GPIO bindings, please refer to ../gpio/gpio.txt. + +=== Pin Configuration Node === + +Each pin configuration node is a sub-node of the pin controller node and is a +container of an arbitrary number of subnodes, called pin group nodes in this +document. + +Please refer to the pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the definition of a +"pin configuration node". + +=== Pin Group Node === + +A pin group node specifies the desired pin mux for an arbitrary number of +pins. The name of the pin group node is optional and not used. + +A pin group node only affects the properties specified in the node, and has no +effect on any properties that are omitted. + +The pin group node accepts a subset of the generic pin config properties. For +details generic pin config properties, please refer to pinctrl-bindings.txt +and <include/linux/pinctrl/pinconfig-generic.h>. + +Required Pin Group Node Properties: + +- pins: Multiple strings. Specifies the name(s) of one or more pins to be + configured by this node. The format of a pin name string is "GP_xy", where x + is an uppercase character from 'A' to 'R', and y is a digit from 0 to 7. +- function: String. Specifies the pin mux selection. Values must be one of: + "gpio", "client_a", "client_b", "client_c" + +Example: + pinctrl: pinctrl@f0000e20 { + compatible = "cnxt,cx92755-pinctrl"; + reg = <0xf0000e20 0x100>; + + uart0_default: uart0_active { + data_signals { + pins = "GP_O0", "GP_O1"; + function = "client_b"; + }; + }; + }; + + uart0: uart@f0000740 { + compatible = "cnxt,cx92755-usart"; + ... + pinctrl-0 = <&uart0_default>; + pinctrl-names = "default"; + }; + +In the example above, a single pin group configuration node defines the +"client select" for the Rx and Tx signals of uart0. The uart0 node references +that pin configuration node using the &uart0_default phandle. diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt new file mode 100644 index 000000000..a81bbf37e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt @@ -0,0 +1,36 @@ +* Freescale i.MX6 UltraLite IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx6ul-iomuxc" +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite + Reference Manual for detailed CONFIG settings. + +CONFIG bits definition: +PAD_CTL_HYS (1 << 16) +PAD_CTL_PUS_100K_DOWN (0 << 14) +PAD_CTL_PUS_47K_UP (1 << 14) +PAD_CTL_PUS_100K_UP (2 << 14) +PAD_CTL_PUS_22K_UP (3 << 14) +PAD_CTL_PUE (1 << 13) +PAD_CTL_PKE (1 << 12) +PAD_CTL_ODE (1 << 11) +PAD_CTL_SPEED_LOW (0 << 6) +PAD_CTL_SPEED_MED (1 << 6) +PAD_CTL_SPEED_HIGH (3 << 6) +PAD_CTL_DSE_DISABLE (0 << 3) +PAD_CTL_DSE_260ohm (1 << 3) +PAD_CTL_DSE_130ohm (2 << 3) +PAD_CTL_DSE_87ohm (3 << 3) +PAD_CTL_DSE_65ohm (4 << 3) +PAD_CTL_DSE_52ohm (5 << 3) +PAD_CTL_DSE_43ohm (6 << 3) +PAD_CTL_DSE_37ohm (7 << 3) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt new file mode 100644 index 000000000..457b2c68d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt @@ -0,0 +1,88 @@ +* Freescale i.MX7 Dual IOMUX Controller + +iMX7D supports two iomuxc controllers, fsl,imx7d-iomuxc controller is similar +as previous iMX SoC generation and fsl,imx7d-iomuxc-lpsr which provides low +power state retention capabilities on gpios that are part of iomuxc-lpsr +(GPIO1_IO7..GPIO1_IO0). While iomuxc-lpsr provides its own set of registers for +mux and pad control settings, it shares the input select register from main +iomuxc controller for daisy chain settings, the fsl,input-sel property extends +fsl,imx-pinctrl driver to support iomuxc-lpsr controller. + +iomuxc_lpsr: iomuxc-lpsr@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; +}; + +iomuxc: iomuxc@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; +}; + +Pheriparials using pads from iomuxc-lpsr support low state retention power +state, under LPSR mode GPIO's state of pads are retain. + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx7d-iomuxc" for main IOMUXC controller, or + "fsl,imx7d-iomuxc-lpsr" for Low Power State Retention IOMUXC controller. +- fsl,pins: each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val + input_val> are specified using a PIN_FUNC_ID macro, which can be found in + imx7d-pinfunc.h under device tree source folder. The last integer CONFIG is + the pad setting value like pull-up on this pin. Please refer to i.MX7 Dual + Reference Manual for detailed CONFIG settings. +- fsl,input-sel: required property for iomuxc-lpsr controller, this property is + a phandle for main iomuxc controller which shares the input select register for + daisy chain settings. + +CONFIG bits definition: +PAD_CTL_PUS_100K_DOWN (0 << 5) +PAD_CTL_PUS_5K_UP (1 << 5) +PAD_CTL_PUS_47K_UP (2 << 5) +PAD_CTL_PUS_100K_UP (3 << 5) +PAD_CTL_PUE (1 << 4) +PAD_CTL_HYS (1 << 3) +PAD_CTL_SRE_SLOW (1 << 2) +PAD_CTL_SRE_FAST (0 << 2) +PAD_CTL_DSE_X1 (0 << 0) +PAD_CTL_DSE_X2 (1 << 0) +PAD_CTL_DSE_X3 (2 << 0) +PAD_CTL_DSE_X4 (3 << 0) + +Examples: +While iomuxc-lpsr is intended to be used by dedicated peripherals to take +advantages of LPSR power mode, is also possible that an IP to use pads from +any of the iomux controllers. For example the I2C1 IP can use SCL pad from +iomuxc-lpsr controller and SDA pad from iomuxc controller as: + +i2c1: i2c@30a20000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1 &pinctrl_i2c1_2>; + status = "okay"; +}; + +iomuxc-lpsr@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = < + MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f + >; + }; +}; + +iomuxc@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + + pinctrl_i2c1_2: i2c1grp-2 { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + >; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt new file mode 100644 index 000000000..08a4a32c8 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt @@ -0,0 +1,217 @@ +Imagination Technologies Pistachio SoC pin controllers +====================================================== + +The pin controllers on Pistachio are a combined GPIO controller, (GPIO) +interrupt controller, and pinmux + pinconf device. The system ("east") pin +controller on Pistachio has 99 pins, 90 of which are MFIOs which can be +configured as GPIOs. The 90 GPIOs are divided into 6 banks of up to 16 GPIOs +each. The GPIO banks are represented as sub-nodes of the pad controller node. + +Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and +../interrupt-controller/interrupts.txt for generic information regarding +pin controller, GPIO, and interrupt bindings. + +Required properties for pin controller node: +-------------------------------------------- + - compatible: "img,pistachio-system-pinctrl". + - reg: Address range of the pinctrl registers. + +Required properties for GPIO bank sub-nodes: +-------------------------------------------- + - interrupts: Interrupt line for the GPIO bank. + - gpio-controller: Indicates the device is a GPIO controller. + - #gpio-cells: Must be two. The first cell is the GPIO pin number and the + second cell indicates the polarity. See <dt-bindings/gpio/gpio.h> for + a list of possible values. + - interrupt-controller: Indicates the device is an interrupt controller. + - #interrupt-cells: Must be two. The first cell is the GPIO pin number and + the second cell encodes the interrupt flags. See + <dt-bindings/interrupt-controller/irq.h> for a list of valid flags. + +Note that the N GPIO bank sub-nodes *must* be named gpio0, gpio1, ... gpioN-1. + +Required properties for pin configuration sub-nodes: +---------------------------------------------------- + - pins: List of pins to which the configuration applies. See below for a + list of possible pins. + +Optional properties for pin configuration sub-nodes: +---------------------------------------------------- + - function: Mux function for the specified pins. This is not applicable for + non-MFIO pins. See below for a list of valid functions for each pin. + - bias-high-impedance: Enable high-impedance mode. + - bias-pull-up: Enable weak pull-up. + - bias-pull-down: Enable weak pull-down. + - bias-bus-hold: Enable bus-keeper mode. + - drive-strength: Drive strength in mA. Supported values: 2, 4, 8, 12. + - input-schmitt-enable: Enable Schmitt trigger. + - input-schmitt-disable: Disable Schmitt trigger. + - slew-rate: Slew rate control. 0 for slow, 1 for fast. + +Pin Functions +--- --------- +mfio0 spim1 +mfio1 spim1, spim0, uart1 +mfio2 spim1, spim0, uart1 +mfio3 spim1 +mfio4 spim1 +mfio5 spim1 +mfio6 spim1 +mfio7 spim1 +mfio8 spim0 +mfio9 spim0 +mfio10 spim0 +mfio11 spis +mfio12 spis +mfio13 spis +mfio14 spis +mfio15 sdhost, mips_trace_clk, mips_trace_data +mfio16 sdhost, mips_trace_dint, mips_trace_data +mfio17 sdhost, mips_trace_trigout, mips_trace_data +mfio18 sdhost, mips_trace_trigin, mips_trace_data +mfio19 sdhost, mips_trace_dm, mips_trace_data +mfio20 sdhost, mips_trace_probe_n, mips_trace_data +mfio21 sdhost, mips_trace_data +mfio22 sdhost, mips_trace_data +mfio23 sdhost +mfio24 sdhost +mfio25 sdhost +mfio26 sdhost +mfio27 sdhost +mfio28 i2c0, spim0 +mfio29 i2c0, spim0 +mfio30 i2c1, spim0 +mfio31 i2c1, spim1 +mfio32 i2c2 +mfio33 i2c2 +mfio34 i2c3 +mfio35 i2c3 +mfio36 i2s_out, audio_clk_in +mfio37 i2s_out, debug_raw_cca_ind +mfio38 i2s_out, debug_ed_sec20_cca_ind +mfio39 i2s_out, debug_ed_sec40_cca_ind +mfio40 i2s_out, debug_agc_done_0 +mfio41 i2s_out, debug_agc_done_1 +mfio42 i2s_out, debug_ed_cca_ind +mfio43 i2s_out, debug_s2l_done +mfio44 i2s_out +mfio45 i2s_dac_clk, audio_sync +mfio46 audio_trigger +mfio47 i2s_in +mfio48 i2s_in +mfio49 i2s_in +mfio50 i2s_in +mfio51 i2s_in +mfio52 i2s_in +mfio53 i2s_in +mfio54 i2s_in, spdif_in +mfio55 uart0, spim0, spim1 +mfio56 uart0, spim0, spim1 +mfio57 uart0, spim0, spim1 +mfio58 uart0, spim1 +mfio59 uart1 +mfio60 uart1 +mfio61 spdif_out +mfio62 spdif_in +mfio63 eth, mips_trace_clk, mips_trace_data +mfio64 eth, mips_trace_dint, mips_trace_data +mfio65 eth, mips_trace_trigout, mips_trace_data +mfio66 eth, mips_trace_trigin, mips_trace_data +mfio67 eth, mips_trace_dm, mips_trace_data +mfio68 eth, mips_trace_probe_n, mips_trace_data +mfio69 eth, mips_trace_data +mfio70 eth, mips_trace_data +mfio71 eth +mfio72 ir +mfio73 pwmpdm, mips_trace_clk, sram_debug +mfio74 pwmpdm, mips_trace_dint, sram_debug +mfio75 pwmpdm, mips_trace_trigout, rom_debug +mfio76 pwmpdm, mips_trace_trigin, rom_debug +mfio77 mdc_debug, mips_trace_dm, rpu_debug +mfio78 mdc_debug, mips_trace_probe_n, rpu_debug +mfio79 ddr_debug, mips_trace_data, mips_debug +mfio80 ddr_debug, mips_trace_data, mips_debug +mfio81 dreq0, mips_trace_data, eth_debug +mfio82 dreq1, mips_trace_data, eth_debug +mfio83 mips_pll_lock, mips_trace_data, usb_debug +mfio84 sys_pll_lock, mips_trace_data, usb_debug +mfio85 wifi_pll_lock, mips_trace_data, sdhost_debug +mfio86 bt_pll_lock, mips_trace_data, sdhost_debug +mfio87 rpu_v_pll_lock, dreq2, socif_debug +mfio88 rpu_l_pll_lock, dreq3, socif_debug +mfio89 audio_pll_lock, dreq4, dreq5 +tck +trstn +tdi +tms +tdo +jtag_comply +safe_mode +por_disable +resetn + +Example: +-------- +pinctrl@18101C00 { + compatible = "img,pistachio-system-pinctrl"; + reg = <0x18101C00 0x400>; + + gpio0: gpio0 { + interrupts = <GIC_SHARED 71 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + ... + + gpio5: gpio5 { + interrupts = <GIC_SHARED 76 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + ... + + uart0_xfer: uart0-xfer { + uart0-rxd { + pins = "mfio55"; + function = "uart0"; + }; + uart0-txd { + pins = "mfio56"; + function = "uart0"; + }; + }; + + uart0_rts_cts: uart0-rts-cts { + uart0-rts { + pins = "mfio57"; + function = "uart0"; + }; + uart0-cts { + pins = "mfio58"; + function = "uart0"; + }; + }; +}; + +uart@... { + ... + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>, <&uart0_rts_cts>; + ... +}; + +usb_vbus: fixed-regulator { + ... + gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>; + ... +}; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt b/kernel/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt index ac4da9fe0..ac4da9fe0 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/kernel/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt index e89b46775..e89b46775 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt index e357b0208..add7c38ec 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt @@ -17,10 +17,10 @@ mpp0 0 gpio, uart0(rxd) mpp1 1 gpo, uart0(txd) mpp2 2 gpio, i2c0(sck), uart0(txd) mpp3 3 gpio, i2c0(sda), uart0(rxd) -mpp4 4 gpio, cpu_pd(vdd) -mpp5 5 gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk) +mpp4 4 gpio, vdd(cpu-pd) +mpp5 5 gpo, ge0(txclkout), uart1(txd), spi1(sck), audio(mclk) mpp6 6 gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo) -mpp7 7 gpo, ge0(txd1), tdm(tdx), audio(lrclk) +mpp7 7 gpo, ge0(txd1), tdm(dtx), audio(lrclk) mpp8 8 gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk) mpp9 9 gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo) mpp10 10 gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi) @@ -52,8 +52,8 @@ mpp30 30 gpio, ge0(rxd7), ge1(rxclk), i2c1(sck) mpp31 31 gpio, tclk, ge0(txerr) mpp32 32 gpio, spi0(cs0) mpp33 33 gpio, dev(bootcs), spi0(cs0) -mpp34 34 gpo, dev(wen0), spi0(mosi) -mpp35 35 gpo, dev(oen), spi0(sck) +mpp34 34 gpo, dev(we0), spi0(mosi) +mpp35 35 gpo, dev(oe), spi0(sck) mpp36 36 gpo, dev(a1), spi0(miso) mpp37 37 gpo, dev(a0), sata0(prsnt) mpp38 38 gpio, dev(ready), uart1(cts), uart0(cts) @@ -86,9 +86,9 @@ mpp57 57 gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt), mpp58 58 gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk), uart0(rts) mpp59 59 gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk) -mpp60 60 gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out), +mpp60 60 gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rstout), audio(sdi) -mpp61 61 gpo, dev(wen1), uart1(txd), audio(rclk) +mpp61 61 gpo, dev(we1), uart1(txd), audio(lrclk) mpp62 62 gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0), audio(mclk), uart0(cts) mpp63 63 gpo, spi0(sck), tclk diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt index bedbe42c8..06e5bb036 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt @@ -15,24 +15,24 @@ name pins functions ================================================================================ mpp0 0 gpio, dev(ad2), spi0(cs1), spi1(cs1) mpp1 1 gpio, dev(ad3), spi0(mosi), spi1(mosi) -mpp2 2 gpio, dev(ad4), ptp(eventreq), led(c0), audio(sdi) -mpp3 3 gpio, dev(ad5), ptp(triggen), led(p3), audio(mclk) +mpp2 2 gpio, dev(ad4), ptp(evreq), led(c0), audio(sdi) +mpp3 3 gpio, dev(ad5), ptp(trig), led(p3), audio(mclk) mpp4 4 gpio, dev(ad6), spi0(miso), spi1(miso) mpp5 5 gpio, dev(ad7), spi0(cs2), spi1(cs2) -mpp6 6 gpio, dev(ad0), led(p1), audio(rclk) +mpp6 6 gpio, dev(ad0), led(p1), audio(lrclk) mpp7 7 gpio, dev(ad1), ptp(clk), led(p2), audio(extclk) mpp8 8 gpio, dev (bootcs), spi0(cs0), spi1(cs0) mpp9 9 gpio, spi0(sck), spi1(sck), nand(we) mpp10 10 gpio, dram(vttctrl), led(c1), nand(re) mpp11 11 gpio, dev(a0), led(c2), audio(sdo) mpp12 12 gpio, dev(a1), audio(bclk) -mpp13 13 gpio, dev(readyn), pcie0(rstoutn), pcie1(rstoutn) +mpp13 13 gpio, dev(ready), pcie0(rstout), pcie1(rstout) mpp14 14 gpio, i2c0(sda), uart1(txd) mpp15 15 gpio, i2c0(sck), uart1(rxd) mpp16 16 gpio, uart0(txd) mpp17 17 gpio, uart0(rxd) -mpp18 18 gpio, tdm(intn) -mpp19 19 gpio, tdm(rstn) +mpp18 18 gpio, tdm(int) +mpp19 19 gpio, tdm(rst) mpp20 20 gpio, tdm(pclk) mpp21 21 gpio, tdm(fsync) mpp22 22 gpio, tdm(drx) @@ -45,12 +45,12 @@ mpp28 28 gpio, led(p3), ge1(txctl), sd(clk) mpp29 29 gpio, pcie1(clkreq), ge1(rxclk), sd(d3) mpp30 30 gpio, ge1(txd0), spi1(cs0) mpp31 31 gpio, ge1(txd1), spi1(mosi) -mpp32 32 gpio, ge1(txd2), spi1(sck), ptp(triggen) +mpp32 32 gpio, ge1(txd2), spi1(sck), ptp(trig) mpp33 33 gpio, ge1(txd3), spi1(miso) mpp34 34 gpio, ge1(txclkout), spi1(sck) mpp35 35 gpio, ge1(rxctl), spi1(cs1), spi0(cs2) mpp36 36 gpio, pcie0(clkreq) -mpp37 37 gpio, pcie0(clkreq), tdm(intn), ge(mdc) +mpp37 37 gpio, pcie0(clkreq), tdm(int), ge(mdc) mpp38 38 gpio, pcie1(clkreq), ge(mdio) mpp39 39 gpio, ref(clkout) mpp40 40 gpio, uart1(txd) @@ -58,25 +58,25 @@ mpp41 41 gpio, uart1(rxd) mpp42 42 gpio, spi1(cs2), led(c0) mpp43 43 gpio, sata0(prsnt), dram(vttctrl) mpp44 44 gpio, sata0(prsnt) -mpp45 45 gpio, spi0(cs2), pcie0(rstoutn) -mpp46 46 gpio, led(p0), ge0(txd0), ge1(txd0) +mpp45 45 gpio, spi0(cs2), pcie0(rstout) +mpp46 46 gpio, led(p0), ge0(txd0), ge1(txd0), dev(we1) mpp47 47 gpio, led(p1), ge0(txd1), ge1(txd1) mpp48 48 gpio, led(p2), ge0(txd2), ge1(txd2) mpp49 49 gpio, led(p3), ge0(txd3), ge1(txd3) mpp50 50 gpio, led(c0), ge0(rxd0), ge1(rxd0) mpp51 51 gpio, led(c1), ge0(rxd1), ge1(rxd1) mpp52 52 gpio, led(c2), ge0(rxd2), ge1(rxd2) -mpp53 53 gpio, pcie1(rstoutn), ge0(rxd3), ge1(rxd3) -mpp54 54 gpio, pcie0(rstoutn), ge0(rxctl), ge1(rxctl) +mpp53 53 gpio, pcie1(rstout), ge0(rxd3), ge1(rxd3) +mpp54 54 gpio, pcie0(rstout), ge0(rxctl), ge1(rxctl) mpp55 55 gpio, ge0(rxclk), ge1(rxclk) mpp56 56 gpio, ge0(txclkout), ge1(txclkout) -mpp57 57 gpio, ge0(txctl), ge1(txctl) +mpp57 57 gpio, ge0(txctl), ge1(txctl), dev(we0) mpp58 58 gpio, led(c0) mpp59 59 gpio, led(c1) mpp60 60 gpio, uart1(txd), led(c2) mpp61 61 gpio, i2c1(sda), uart1(rxd), spi1(cs2), led(p0) mpp62 62 gpio, i2c1(sck), led(p1) -mpp63 63 gpio, ptp(triggen), led(p2) +mpp63 63 gpio, ptp(trig), led(p2), dev(burst/last) mpp64 64 gpio, dram(vttctrl), led(p3) mpp65 65 gpio, sata1(prsnt) -mpp66 66 gpio, ptp(eventreq), spi1(cs3) +mpp66 66 gpio, ptp(evreq), spi1(cs3) diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt index 4ac138aaa..54ec4c0a0 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt @@ -29,14 +29,14 @@ mpp10 10 gpio, ge0(txd3), dev(ad12) mpp11 11 gpio, ge0(txctl), dev(ad13) mpp12 12 gpio, ge0(rxd0), pcie0(rstout), spi0(cs1), dev(ad14), pcie3(clkreq) mpp13 13 gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15), pcie2(clkreq) -mpp14 14 gpio, ge0(rxd2), ptp(clk), m(vtt_ctrl), spi0(cs3), dev(wen1), pcie3(clkreq) +mpp14 14 gpio, ge0(rxd2), ptp(clk), dram(vttctrl), spi0(cs3), dev(we1), pcie3(clkreq) mpp15 15 gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi) -mpp16 16 gpio, ge0(rxctl), ge(mdio slave), m(decc_err), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1] -mpp17 17 gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt) -mpp18 18 gpio, ge0(rxerr), ptp(trig_gen), ua1(txd), spi0(cs0) -mpp19 19 gpio, ge0(col), ptp(event_req), ge0(txerr), sata1(prsnt), ua0(cts) +mpp16 16 gpio, ge0(rxctl), ge(mdio slave), dram(deccerr), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1] +mpp17 17 gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt), sata0(prsnt) +mpp18 18 gpio, ge0(rxerr), ptp(trig), ua1(txd), spi0(cs0) +mpp19 19 gpio, ge0(col), ptp(evreq), ge0(txerr), sata1(prsnt), ua0(cts) mpp20 20 gpio, ge0(txclk), ptp(clk), sata0(prsnt), ua0(rts) -mpp21 21 gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs) +mpp21 21 gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs), sata1(prsnt) mpp22 22 gpio, spi0(mosi), dev(ad0) mpp23 23 gpio, spi0(sck), dev(ad2) mpp24 24 gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready) @@ -45,35 +45,35 @@ mpp26 26 gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1) mpp27 27 gpio, spi0(cs3), ge1(txclkout), i2c1(sda), sd0(d7), dev(cs2) mpp28 28 gpio, ge1(txd0), sd0(clk), dev(ad5) mpp29 29 gpio, ge1(txd1), dev(ale0) -mpp30 30 gpio, ge1(txd2), dev(oen) +mpp30 30 gpio, ge1(txd2), dev(oe) mpp31 31 gpio, ge1(txd3), dev(ale1) -mpp32 32 gpio, ge1(txctl), dev(wen0) -mpp33 33 gpio, m(decc_err), dev(ad3) +mpp32 32 gpio, ge1(txctl), dev(we0) +mpp33 33 gpio, dram(deccerr), dev(ad3) mpp34 34 gpio, dev(ad1) mpp35 35 gpio, ref(clk_out1), dev(a1) -mpp36 36 gpio, ptp(trig_gen), dev(a0) +mpp36 36 gpio, ptp(trig), dev(a0) mpp37 37 gpio, ptp(clk), ge1(rxclk), sd0(d3), dev(ad8) -mpp38 38 gpio, ptp(event_req), ge1(rxd1), ref(clk_out0), sd0(d0), dev(ad4) +mpp38 38 gpio, ptp(evreq), ge1(rxd1), ref(clk_out0), sd0(d0), dev(ad4) mpp39 39 gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2) mpp40 40 gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6) -mpp41 41 gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last) +mpp41 41 gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last), nand(rb0) mpp42 42 gpio, ua1(txd), ua0(rts), dev(ad7) -mpp43 43 gpio, pcie0(clkreq), m(vtt_ctrl), m(decc_err), spi1(cs2), dev(clkout) +mpp43 43 gpio, pcie0(clkreq), dram(vttctrl), dram(deccerr), spi1(cs2), dev(clkout), nand(rb1) mpp44 44 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3] -mpp45 45 gpio, ref(clk_out0), pcie0(rstout) -mpp46 46 gpio, ref(clk_out1), pcie0(rstout) +mpp45 45 gpio, ref(clk_out0), pcie0(rstout), ua1(rxd) +mpp46 46 gpio, ref(clk_out1), pcie0(rstout), ua1(txd) mpp47 47 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [2] -mpp48 48 gpio, sata0(prsnt), m(vtt_ctrl), tdm2c(pclk), audio(mclk), sd0(d4), pcie0(clkreq) -mpp49 49 gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm2c(fsync), audio(lrclk), sd0(d5), pcie1(clkreq) -mpp50 50 gpio, pcie0(rstout), tdm2c(drx), audio(extclk), sd0(cmd) -mpp51 51 gpio, tdm2c(dtx), audio(sdo), m(decc_err) -mpp52 52 gpio, pcie0(rstout), tdm2c(intn), audio(sdi), sd0(d6) -mpp53 53 gpio, sata1(prsnt), sata0(prsnt), tdm2c(rstn), audio(bclk), sd0(d7) +mpp48 48 gpio, sata0(prsnt), dram(vttctrl), tdm(pclk), audio(mclk), sd0(d4), pcie0(clkreq) +mpp49 49 gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm(fsync), audio(lrclk), sd0(d5), pcie1(clkreq) +mpp50 50 gpio, pcie0(rstout), tdm(drx), audio(extclk), sd0(cmd) +mpp51 51 gpio, tdm(dtx), audio(sdo), dram(deccerr), ptp(trig) +mpp52 52 gpio, pcie0(rstout), tdm(int), audio(sdi), sd0(d6), ptp(clk) +mpp53 53 gpio, sata1(prsnt), sata0(prsnt), tdm(rst), audio(bclk), sd0(d7), ptp(evreq) mpp54 54 gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), ge0(txerr), sd0(d3) -mpp55 55 gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0) -mpp56 56 gpio, ua1(rts), ge(mdc), m(decc_err), spi1(mosi) -mpp57 57 gpio, spi1(sck), sd0(clk) -mpp58 58 gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1) +mpp55 55 gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0), ua1(rxd) +mpp56 56 gpio, ua1(rts), ge(mdc), dram(deccerr), spi1(mosi), ua1(txd) +mpp57 57 gpio, spi1(sck), sd0(clk), ua1(txd) +mpp58 58 gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1), ua1(rxd) mpp59 59 gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2) [1]: only available on 88F6820 and 88F6828 diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt index 5b1a9dc00..a40b60f1c 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt @@ -4,8 +4,9 @@ Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding part and usage. Required properties: -- compatible: "marvell,88f6920-pinctrl", "marvell,88f6928-pinctrl" - depending on the specific variant of the SoC being used. +- compatible: "marvell,88f6920-pinctrl", "marvell,88f6925-pinctrl" or + "marvell,88f6928-pinctrl" depending on the specific variant of the + SoC being used. - reg: register specifier of MPP registers Available mpp pins/groups and functions: @@ -24,55 +25,60 @@ mpp6 6 gpio, dev(cs3), xsmi(mdio) mpp7 7 gpio, dev(ad9), xsmi(mdc) mpp8 8 gpio, dev(ad10), ptp(trig) mpp9 9 gpio, dev(ad11), ptp(clk) -mpp10 10 gpio, dev(ad12), ptp(event) +mpp10 10 gpio, dev(ad12), ptp(evreq) mpp11 11 gpio, dev(ad13), led(clk) mpp12 12 gpio, pcie0(rstout), dev(ad14), led(stb) -mpp13 13 gpio, dev(ad15), led(data) -mpp14 14 gpio, m(vtt), dev(wen1), ua1(txd) +mpp13 13 gpio, dev(ad15), pcie2(clkreq), led(data) +mpp14 14 gpio, dram(vttctrl), dev(we1), ua1(txd) mpp15 15 gpio, pcie0(rstout), spi0(mosi), i2c1(sck) -mpp16 16 gpio, m(decc), spi0(miso), i2c1(sda) -mpp17 17 gpio, ua1(rxd), spi0(sck), smi(mdio) +mpp16 16 gpio, dram(deccerr), spi0(miso), pcie0(clkreq), i2c1(sda) +mpp17 17 gpio, ua1(rxd), spi0(sck), sata1(prsnt) [1], sata0(prsnt) [1], smi(mdio) mpp18 18 gpio, ua1(txd), spi0(cs0), i2c2(sck) -mpp19 19 gpio, sata1(present) [1], ua0(cts), ua1(rxd), i2c2(sda) -mpp20 20 gpio, sata0(present) [1], ua0(rts), ua1(txd), smi(mdc) -mpp21 21 gpio, spi0(cs1), sata0(present) [1], sd(cmd), dev(bootcs), ge(rxd0) +mpp19 19 gpio, sata1(prsnt) [1], ua0(cts), ua1(rxd), i2c2(sda) +mpp20 20 gpio, sata0(prsnt) [1], ua0(rts), ua1(txd), smi(mdc) +mpp21 21 gpio, spi0(cs1), sata0(prsnt) [1], sd0(cmd), dev(bootcs), + sata1(prsnt) [1], ge(rxd0) mpp22 22 gpio, spi0(mosi), dev(ad0) mpp23 23 gpio, spi0(sck), dev(ad2) -mpp24 24 gpio, spi0(miso), ua0(cts), ua1(rxd), sd(d4), dev(readyn) -mpp25 25 gpio, spi0(cs0), ua0(rts), ua1(txd), sd(d5), dev(cs0) -mpp26 26 gpio, spi0(cs2), i2c1(sck), sd(d6), dev(cs1) -mpp27 27 gpio, spi0(cs3), i2c1(sda), sd(d7), dev(cs2), ge(txclkout) -mpp28 28 gpio, sd(clk), dev(ad5), ge(txd0) +mpp24 24 gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready) +mpp25 25 gpio, spi0(cs0), ua0(rts), ua1(txd), sd0(d5), dev(cs0) +mpp26 26 gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1) +mpp27 27 gpio, spi0(cs3), i2c1(sda), sd0(d7), dev(cs2), ge(txclkout) +mpp28 28 gpio, sd0(clk), dev(ad5), ge(txd0) mpp29 29 gpio, dev(ale0), ge(txd1) -mpp30 30 gpio, dev(oen), ge(txd2) +mpp30 30 gpio, dev(oe), ge(txd2) mpp31 31 gpio, dev(ale1), ge(txd3) -mpp32 32 gpio, dev(wen0), ge(txctl) -mpp33 33 gpio, m(decc), dev(ad3) +mpp32 32 gpio, dev(we0), ge(txctl) +mpp33 33 gpio, dram(deccerr), dev(ad3) mpp34 34 gpio, dev(ad1) mpp35 35 gpio, ref(clk), dev(a1) mpp36 36 gpio, dev(a0) -mpp37 37 gpio, sd(d3), dev(ad8), ge(rxclk) -mpp38 38 gpio, ref(clk), sd(d0), dev(ad4), ge(rxd1) -mpp39 39 gpio, i2c1(sck), ua0(cts), sd(d1), dev(a2), ge(rxd2) -mpp40 40 gpio, i2c1(sda), ua0(rts), sd(d2), dev(ad6), ge(rxd3) -mpp41 41 gpio, ua1(rxd), ua0(cts), spi1(cs3), dev(burstn), nd(rbn0), ge(rxctl) +mpp37 37 gpio, sd0(d3), dev(ad8), ge(rxclk) +mpp38 38 gpio, ref(clk), sd0(d0), dev(ad4), ge(rxd1) +mpp39 39 gpio, i2c1(sck), ua0(cts), sd0(d1), dev(a2), ge(rxd2) +mpp40 40 gpio, i2c1(sda), ua0(rts), sd0(d2), dev(ad6), ge(rxd3) +mpp41 41 gpio, ua1(rxd), ua0(cts), spi1(cs3), dev(burst/last), nand(rb0), ge(rxctl) mpp42 42 gpio, ua1(txd), ua0(rts), dev(ad7) -mpp43 43 gpio, pcie0(clkreq), m(vtt), m(decc), spi1(cs2), dev(clkout), nd(rbn1) -mpp44 44 gpio, sata0(present) [1], sata1(present) [1], led(clk) +mpp43 43 gpio, pcie0(clkreq), dram(vttctrl), dram(deccerr), spi1(cs2), dev(clkout), nand(rb1) +mpp44 44 gpio, sata0(prsnt) [1], sata1(prsnt) [1], sata2(prsnt) [2], + sata3(prsnt) [2], led(clk) mpp45 45 gpio, ref(clk), pcie0(rstout), ua1(rxd) mpp46 46 gpio, ref(clk), pcie0(rstout), ua1(txd), led(stb) -mpp47 47 gpio, sata0(present) [1], sata1(present) [1], led(data) -mpp48 48 gpio, sata0(present) [1], m(vtt), tdm(pclk) [1], audio(mclk) [1], sd(d4), pcie0(clkreq), ua1(txd) -mpp49 49 gpio, tdm(fsync) [1], audio(lrclk) [1], sd(d5), ua2(rxd) -mpp50 50 gpio, pcie0(rstout), tdm(drx) [1], audio(extclk) [1], sd(cmd), ua2(rxd) -mpp51 51 gpio, tdm(dtx) [1], audio(sdo) [1], m(decc), ua2(txd) -mpp52 52 gpio, pcie0(rstout), tdm(intn) [1], audio(sdi) [1], sd(d6), i2c3(sck) -mpp53 53 gpio, sata1(present) [1], sata0(present) [1], tdm(rstn) [1], audio(bclk) [1], sd(d7), i2c3(sda) -mpp54 54 gpio, sata0(present) [1], sata1(present) [1], pcie0(rstout), sd(d3), ua3(txd) -mpp55 55 gpio, ua1(cts), spi1(cs1), sd(d0), ua1(rxd), ua3(rxd) -mpp56 56 gpio, ua1(rts), m(decc), spi1(mosi), ua1(txd) -mpp57 57 gpio, spi1(sck), sd(clk), ua1(txd) -mpp58 58 gpio, i2c1(sck), pcie2(clkreq), spi1(miso), sd(d1), ua1(rxd) -mpp59 59 gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd(d2) +mpp47 47 gpio, sata0(prsnt) [1], sata1(prsnt) [1], sata2(prsnt) [2], + sata3(prsnt) [2], led(data) +mpp48 48 gpio, sata0(prsnt) [1], dram(vttctrl), tdm(pclk) [2], audio(mclk) [2], sd0(d4), pcie0(clkreq), ua1(txd) +mpp49 49 gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm(fsync) [2], + audio(lrclk) [2], sd0(d5), ua2(rxd) +mpp50 50 gpio, pcie0(rstout), tdm(drx) [2], audio(extclk) [2], sd0(cmd), ua2(rxd) +mpp51 51 gpio, tdm(dtx) [2], audio(sdo) [2], dram(deccerr), ua2(txd) +mpp52 52 gpio, pcie0(rstout), tdm(int) [2], audio(sdi) [2], sd0(d6), i2c3(sck) +mpp53 53 gpio, sata1(prsnt) [1], sata0(prsnt) [1], tdm(rst) [2], audio(bclk) [2], sd0(d7), i2c3(sda) +mpp54 54 gpio, sata0(prsnt) [1], sata1(prsnt) [1], pcie0(rstout), sd0(d3), ua3(txd) +mpp55 55 gpio, ua1(cts), spi1(cs1), sd0(d0), ua1(rxd), ua3(rxd) +mpp56 56 gpio, ua1(rts), dram(deccerr), spi1(mosi), ua1(txd) +mpp57 57 gpio, spi1(sck), sd0(clk), ua1(txd) +mpp58 58 gpio, i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1), ua1(rxd) +mpp59 59 gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2) -[1]: only available on 88F6928 +[1]: only available on 88F6925/88F6928 +[2]: only available on 88F6928 diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt index 96e7744ca..76da7222f 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt @@ -18,7 +18,7 @@ only for more detailed description in this document. name pins functions ================================================================================ -mpp0 0 gpio, ge0(txclko), lcd(d0) +mpp0 0 gpio, ge0(txclkout), lcd(d0) mpp1 1 gpio, ge0(txd0), lcd(d1) mpp2 2 gpio, ge0(txd1), lcd(d2) mpp3 3 gpio, ge0(txd2), lcd(d3) @@ -30,16 +30,16 @@ mpp8 8 gpio, ge0(rxd2), lcd(d8) mpp9 9 gpio, ge0(rxd3), lcd(d9) mpp10 10 gpio, ge0(rxctl), lcd(d10) mpp11 11 gpio, ge0(rxclk), lcd(d11) -mpp12 12 gpio, ge0(txd4), ge1(txd0), lcd(d12) -mpp13 13 gpio, ge0(txd5), ge1(txd1), lcd(d13) -mpp14 14 gpio, ge0(txd6), ge1(txd2), lcd(d15) -mpp15 15 gpio, ge0(txd7), ge1(txd3), lcd(d16) -mpp16 16 gpio, ge0(txd7), ge1(txd3), lcd(d16) -mpp17 17 gpio, ge0(col), ge1(txctl), lcd(d17) +mpp12 12 gpio, ge0(txd4), ge1(txclkout), lcd(d12) +mpp13 13 gpio, ge0(txd5), ge1(txd0), spi1(mosi), lcd(d13) +mpp14 14 gpio, ge0(txd6), ge1(txd1), spi1(sck), lcd(d15) +mpp15 15 gpio, ge0(txd7), ge1(txd2), lcd(d16) +mpp16 16 gpio, ge0(txd7), ge1(txd3), spi1(cs0), lcd(d16) +mpp17 17 gpio, ge0(col), ge1(txctl), spi1(miso), lcd(d17) mpp18 18 gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig) mpp19 19 gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq) mpp20 20 gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk) -mpp21 21 gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat) +mpp21 21 gpio, ge0(rxd5), ge1(rxd3), lcd(d21), dram(bat) mpp22 22 gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt) mpp23 23 gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt) mpp24 24 gpio, lcd(hsync), sata1(prsnt), tdm(rst) @@ -51,25 +51,29 @@ mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk) mpp30 30 gpio, tdm(int1), sd0(clk) mpp31 31 gpio, tdm(int2), sd0(cmd) mpp32 32 gpio, tdm(int3), sd0(d0) -mpp33 33 gpio, tdm(int4), sd0(d1), mem(bat) -mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt) +mpp33 33 gpio, tdm(int4), sd0(d1), dram(bat), dram(vttctrl) +mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt), dram(deccerr) mpp35 35 gpio, tdm(int6), sd0(d3), sata1(prsnt) -mpp36 36 gpio, spi(mosi) -mpp37 37 gpio, spi(miso) -mpp38 38 gpio, spi(sck) -mpp39 39 gpio, spi(cs0) -mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0) -mpp41 41 gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt), - pcie(clkreq1) -mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer) -mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout) -mpp44 44 gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2), - mem(bat) -mpp45 45 gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt) -mpp46 46 gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt) -mpp47 47 gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3), - ref(clkout) -mpp48 48 gpio, dev(clkout), dev(burst/last) +mpp36 36 gpio, spi0(mosi) +mpp37 37 gpio, spi0(miso) +mpp38 38 gpio, spi0(sck) +mpp39 39 gpio, spi0(cs0) +mpp40 40 gpio, spi0(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0), + spi1(cs1) +mpp41 41 gpio, spi0(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt), + pcie(clkreq1), spi1(cs2) +mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm(timer) +mpp43 43 gpio, uart2(txd), uart0(rts), spi0(cs3), pcie(rstout), + spi1(cs3) +mpp44 44 gpio, uart2(cts), uart3(rxd), spi0(cs4), pcie(clkreq2), + dram(bat), spi1(cs4) +mpp45 45 gpio, uart2(rts), uart3(txd), spi0(cs5), sata1(prsnt), + spi1(cs5), dram(vttctrl) +mpp46 46 gpio, uart3(rts), uart1(rts), spi0(cs6), sata0(prsnt), + spi1(cs6) +mpp47 47 gpio, uart3(cts), uart1(cts), spi0(cs7), pcie(clkreq3), + ref(clkout), spi1(cs7) +mpp48 48 gpio, dev(clkout), dev(burst/last), nand(rb) * Marvell Armada XP (mv78260 and mv78460 only) diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt b/kernel/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt new file mode 100644 index 000000000..df0309c57 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt @@ -0,0 +1,57 @@ +NXP LPC18xx/43xx SCU pin controller Device Tree Bindings +-------------------------------------------------------- + +Required properties: +- compatible : Should be "nxp,lpc1850-scu" +- reg : Address and length of the register set for the device +- clocks : Clock specifier (see clock bindings for details) + +The lpc1850-scu driver uses the generic pin multiplexing and generic pin +configuration documented in pinctrl-bindings.txt. + +The following generic nodes are supported: + - function + - pins + - bias-disable + - bias-pull-up + - bias-pull-down + - drive-strength + - input-enable + - input-disable + - input-schmitt-enable + - input-schmitt-disable + - slew-rate + +Not all pins support all properties so either refer to the NXP 1850/4350 +user manual or the pin table in the pinctrl-lpc18xx driver for supported +pin properties. + +Example: +pinctrl: pinctrl@40086000 { + compatible = "nxp,lpc1850-scu"; + reg = <0x40086000 0x1000>; + clocks = <&ccu1 CLK_CPU_SCU>; + + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + + uart0_pins: uart0-pins { + uart0_rx_cfg { + pins = "pf_11"; + function = "uart0"; + bias-disable; + input-enable; + }; + + uart0_tx_cfg { + pins = "pf_10"; + function = "uart0"; + bias-disable; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt b/kernel/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt new file mode 100644 index 000000000..eecf028ff --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pinctrl/pinctrl-atlas7.txt @@ -0,0 +1,109 @@ +CSR SiRFatlas7 pinmux controller + +Required properties: +- compatible : "sirf,atlas7-ioc" +- reg : Address range of the pinctrl registers + +For example, pinctrl might have properties like the following: + pinctrl: ioc@18880000 { + compatible = "sirf,atlas7-ioc"; + reg = <0x18880000 0x1000>; + + a_ac97_pmx: ac97@0 { + ac97 { + groups = "audio_ac97_grp"; + function = "audio_ac97"; + }; + }; + + ... + + sd2_pmx: sd2@0 { + sd2 { + groups = "sd2_grp0"; + function = "sd2"; + }; + }; + + ... + + + sample0_cfg: sample0@0 { + sample0 { + pins = "ldd_0", "ldd_1"; + bias-pull-up; + }; + }; + + sample1_cfg: sample1@0 { + sample1 { + pins = "ldd_2", "ldd_3"; + input-schmitt-enable; + }; + }; + + sample2_cfg: sample2@0 { + sample2 { + groups = "uart4_nopause_grp"; + bias-pull-down; + }; + }; + + sample3_cfg: sample3@0 { + sample3 { + pins = "ldd_4", "ldd_5"; + drive-strength = <2>; + }; + }; + }; + +Please refer to pinctrl-bindings.txt in this directory for details of the common +pinctrl bindings used by client devices. + +SiRFatlas7's pinmux nodes act as a container for an abitrary number of subnodes. +Each of these subnodes represents some desired configuration for a group of pins. + +Required subnode-properties: +- groups : An array of strings. Each string contains the name of a group. +- function: A string containing the name of the function to mux to the + group. + + Valid values for group and function names can be found from looking at the + group and function arrays in driver files: + drivers/pinctrl/pinctrl-sirf.c + +For example, pinctrl might have subnodes like the following: + sd0_pmx: sd0@0 { + sd0 { + groups = "sd0_grp"; + function = "sd0"; + }; + }; + + sd1_pmx0: sd1@0 { + sd1 { + groups = "sd1_grp0"; + function = "sd1_m0"; + }; + }; + + sd1_pmx1: sd1@1 { + sd1 { + groups = "sd1_grp1"; + function = "sd1_m1"; + }; + }; + +For a specific board, if it wants to use sd1, +it can add the following to its board-specific .dts file. +sd1: sd@0x12340000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_pmx0>; +} + +or + +sd1: sd@0x12340000 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_pmx1>; +} diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/kernel/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 5868a0f72..0480bc31b 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -3,9 +3,11 @@ The Mediatek's Pin controller is used to control SoC pins. Required properties: -- compatible: value should be either of the following. +- compatible: value should be one of the following. (a) "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl. -- mediatek,pctl-regmap: Should be a phandle of the syscfg node. + (b) "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl. + (c) "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl. + (d) "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. - gpio-controller : Marks the device node as a gpio controller. @@ -24,6 +26,9 @@ Required properties: Only the following flags are supported: 0 - GPIO_ACTIVE_HIGH 1 - GPIO_ACTIVE_LOW + +Optional properties: +- mediatek,pctl-regmap: Should be a phandle of the syscfg node. - reg: physicall address base for EINT registers - interrupt-controller: Marks the device node as an interrupt controller - #interrupt-cells: Should be two. diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt new file mode 100644 index 000000000..77aa11790 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt @@ -0,0 +1,90 @@ +Qualcomm MSM8660 TLMM block + +Required properties: +- compatible: "qcom,msm8660-pinctrl" +- reg: Should be the base address and length of the TLMM block. +- interrupts: Should be the parent IRQ of the TLMM block. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. + The first cell is the gpio pin number and the + second cell is used for optional parameters. + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Qualcomm's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + + pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength, + output-low, output-high. + +Non-empty subnodes must specify the 'pins' property. + +Valid values for pins are: + gpio0-gpio172, sdc3_clk, sdc3_cmd, sdc3_data sdc4_clk, sdc4_cmd, sdc4_data + +Valid values for function are: + gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a, gp_clk_1b, + gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, + gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, + gsbi2_spi_cs3_n, gsbi3, gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, + gsbi4, gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12, hdmi, i2s, + lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2, sdc5, tsif1, tsif2, usb_fs1, + usb_fs1_oe_n, usb_fs2, usb_fs2_oe_n, vfe, vsens_alarm, + +Example: + + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8660-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0x4>; + + pinctrl-names = "default"; + pinctrl-0 = <&gsbi12_uart>; + + gsbi12_uart: gsbi12-uart { + mux { + pins = "gpio117", "gpio118"; + function = "gsbi12"; + }; + + tx { + pins = "gpio118"; + drive-strength = <8>; + bias-disable; + }; + + rx { + pins = "gpio117"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/kernel/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt index ed19991aa..d7803a2a9 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt @@ -7,8 +7,13 @@ of PMIC's from Qualcomm. Usage: required Value type: <string> Definition: Should contain one of: + "qcom,pm8018-mpp", + "qcom,pm8038-mpp", + "qcom,pm8821-mpp", "qcom,pm8841-mpp", "qcom,pm8916-mpp", + "qcom,pm8917-mpp", + "qcom,pm8921-mpp", "qcom,pm8941-mpp", "qcom,pma8084-mpp", @@ -77,12 +82,9 @@ to specify in a pin configuration subnode: Value type: <string> Definition: Specify the alternative function to be configured for the specified pins. Valid values are: - "normal", - "paired", - "dtest1", - "dtest2", - "dtest3", - "dtest4" + "digital", + "analog", + "sink" - bias-disable: Usage: optional @@ -127,12 +129,18 @@ to specify in a pin configuration subnode: Definition: Selects the power source for the specified pins. Valid power sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h> -- qcom,analog-mode: +- qcom,analog-level: Usage: optional - Value type: <none> - Definition: Selects Analog mode of operation: combined with input-enable - and/or output-high, output-low MPP could operate as - Bidirectional Logic, Analog Input, Analog Output. + Value type: <u32> + Definition: Selects the source for analog output. Valued values are + defined in <dt-binding/pinctrl/qcom,pmic-mpp.h> + PMIC_MPP_AOUT_LVL_* + +- qcom,dtest: + Usage: optional + Value type: <u32> + Definition: Selects which dtest rail to be routed in the various functions. + Valid values are 1-4 - qcom,amux-route: Usage: optional @@ -140,6 +148,10 @@ to specify in a pin configuration subnode: Definition: Selects the source for analog input. Valid values are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6... +- qcom,paired: + Usage: optional + Value type: <none> + Definition: Indicates that the pin should be operating in paired mode. Example: @@ -156,7 +168,7 @@ Example: pm8841_default: default { gpio { pins = "mpp1", "mpp2", "mpp3", "mpp4"; - function = "normal"; + function = "digital"; input-enable; power-source = <PM8841_MPP_S3>; }; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index bfe72ec05..ffadb7a37 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -16,7 +16,10 @@ Required Properties: - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller. - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller. - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller. - - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2) compatible pin-controller. + - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2-W) compatible pin-controller. + - "renesas,pfc-r8a7793": for R8A7793 (R-Car M2-N) compatible pin-controller. + - "renesas,pfc-r8a7794": for R8A7794 (R-Car E2) compatible pin-controller. + - "renesas,pfc-r8a7795": for R8A7795 (R-Car H3) compatible pin-controller. - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller. - reg: Base address and length of each memory resource used by the pin @@ -56,12 +59,12 @@ are parsed through phandles and processed purely based on their content. Pin Configuration Node Properties: -- renesas,pins : An array of strings, each string containing the name of a pin. -- renesas,groups : An array of strings, each string containing the name of a pin +- pins : An array of strings, each string containing the name of a pin. +- groups : An array of strings, each string containing the name of a pin group. -- renesas,function: A string containing the name of the function to mux to the - pin group(s) specified by the renesas,groups property +- function: A string containing the name of the function to mux to the pin + group(s) specified by the groups property. Valid values for pin, group and function names can be found in the group and function arrays of the PFC data file corresponding to the SoC @@ -69,7 +72,9 @@ Pin Configuration Node Properties: The pin configuration parameters use the generic pinconf bindings defined in pinctrl-bindings.txt in this directory. The supported parameters are -bias-disable, bias-pull-up and bias-pull-down. +bias-disable, bias-pull-up, bias-pull-down and power-source. For pins that +have a configurable I/O voltage, the power-source value should be the +nominal I/O voltage in millivolts. GPIO @@ -139,19 +144,19 @@ Example 3: KZM-A9-GT (SH-Mobile AG5) default pin state hog and pin control maps mmcif_pins: mmcif { mux { - renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; - renesas,function = "mmc0"; + groups = "mmc0_data8_0", "mmc0_ctrl_0"; + function = "mmc0"; }; cfg { - renesas,groups = "mmc0_data8_0"; - renesas,pins = "PORT279"; + groups = "mmc0_data8_0"; + pins = "PORT279"; bias-pull-up; }; }; scifa4_pins: scifa4 { - renesas,groups = "scifa4_data", "scifa4_ctrl"; - renesas,function = "scifa4"; + groups = "scifa4_data", "scifa4_ctrl"; + function = "scifa4"; }; }; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index 388b21324..391ef4be8 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -21,14 +21,15 @@ defined as gpio sub-nodes of the pinmux controller. Required properties for iomux controller: - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl" "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl" - "rockchip,rk3288-pinctrl" + "rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl" - rockchip,grf: phandle referencing a syscon providing the "general register files" Optional properties for iomux controller: - rockchip,pmu: phandle referencing a syscon providing the pmu registers as some SoCs carry parts of the iomux controller registers there. - Required for at least rk3188 and rk3288. + Required for at least rk3188 and rk3288. On the rk3368 this should + point to the PMUGRF syscon. Deprecated properties for iomux controller: - reg: first element is the general register space of the iomux controller diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/kernel/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt index f63fcb3ed..221380243 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt @@ -3,7 +3,9 @@ ST Ericsson Nomadik pinmux controller Required properties: - compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl", "stericsson,stn8815-pinctrl" -- reg: Should contain the register physical address and length of the PRCMU. +- nomadik-gpio-chips: array of phandles to the corresponding GPIO chips + (these have the register ranges used by the pin controller). +- prcm: phandle to the PRCMU managing the back end of this pin controller Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices, including the meaning of the @@ -74,7 +76,8 @@ Example board file extract: pinctrl@80157000 { compatible = "stericsson,db8500-pinctrl"; - reg = <0x80157000 0x2000>; + nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>; + prcm = <&prcmu>; pinctrl-names = "default"; diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt index b7b55a964..f488b0f77 100644 --- a/kernel/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt +++ b/kernel/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt @@ -45,8 +45,9 @@ to specify in a pinconf subnode: Valid values for groups are: ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp, - qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp, - spi0_1_grp - spi0_2_grp, spi1_0_grp - spi1_3_grp, sdio0_0_grp - sdio0_2_grp, + qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp - spi0_2_grp, + spi0_X_ssY (X=0..2, Y=0..2), spi1_0_grp - spi1_3_grp, + spi1_X_ssY (X=0..3, Y=0..2), sdio0_0_grp - sdio0_2_grp, sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp, sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand, can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp, @@ -59,7 +60,7 @@ to specify in a pinconf subnode: Valid values for function are: ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1, - spi0, spi1, sdio0, sdio0_pc, sdio0_cd, sdio0_wp, + spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, sdio0_cd, sdio0_wp, sdio1, sdio1_pc, sdio1_cd, sdio1_wp, smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1, i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1 diff --git a/kernel/Documentation/devicetree/bindings/power/bq24257.txt b/kernel/Documentation/devicetree/bindings/power/bq24257.txt new file mode 100644 index 000000000..d693702c9 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/power/bq24257.txt @@ -0,0 +1,64 @@ +Binding for TI bq24250/bq24251/bq24257 Li-Ion Charger + +Required properties: +- compatible: Should contain one of the following: + * "ti,bq24250" + * "ti,bq24251" + * "ti,bq24257" +- reg: integer, i2c address of the device. +- interrupt-parent: Should be the phandle for the interrupt controller. Use in + conjunction with "interrupts". +- interrupts: Interrupt mapping for GPIO IRQ (configure for both edges). Use in + conjunction with "interrupt-parent". +- ti,battery-regulation-voltage: integer, maximum charging voltage in uV. +- ti,charge-current: integer, maximum charging current in uA. +- ti,termination-current: integer, charge will be terminated when current in + constant-voltage phase drops below this value (in uA). + +Optional properties: +- pg-gpios: GPIO used for connecting the bq2425x device PG (Power Good) pin. + This pin is not available on all devices however it should be used if + possible as this is the recommended way to obtain the charger's input PG + state. If this pin is not specified a software-based approach for PG + detection is used. +- ti,current-limit: The maximum current to be drawn from the charger's input + (in uA). If this property is not specified, the input limit current is + set automatically using USB D+/D- signal based charger type detection. + If the hardware does not support the D+/D- based detection, a default + of 500,000 is used (=500mA) instead. +- ti,ovp-voltage: Configures the over voltage protection voltage (in uV). If + not specified a default of 6,5000,000 (=6.5V) is used. +- ti,in-dpm-voltage: Configures the threshold input voltage for the dynamic + power path management (in uV). If not specified a default of 4,360,000 + (=4.36V) is used. + +Example: + +bq24257 { + compatible = "ti,bq24257"; + reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + + pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <1000000>; + ti,termination-current = <50000>; +}; + +Example: + +bq24250 { + compatible = "ti,bq24250"; + reg = <0x6a>; + interrupt-parent = <&gpio1>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <500000>; + ti,termination-current = <50000>; + ti,current-limit = <900000>; + ti,ovp-voltage = <9500000>; + ti,in-dpm-voltage = <4440000>; +}; diff --git a/kernel/Documentation/devicetree/bindings/power/bq25890.txt b/kernel/Documentation/devicetree/bindings/power/bq25890.txt new file mode 100644 index 000000000..c9dd17d14 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/power/bq25890.txt @@ -0,0 +1,46 @@ +Binding for TI bq25890 Li-Ion Charger + +Required properties: +- compatible: Should contain one of the following: + * "ti,bq25890" +- reg: integer, i2c address of the device. +- ti,battery-regulation-voltage: integer, maximum charging voltage (in uV); +- ti,charge-current: integer, maximum charging current (in uA); +- ti,termination-current: integer, charge will be terminated when current in + constant-voltage phase drops below this value (in uA); +- ti,precharge-current: integer, maximum charge current during precharge + phase (in uA); +- ti,minimum-sys-voltage: integer, when battery is charging and it is below + minimum system voltage, the system will be regulated above + minimum-sys-voltage setting (in uV); +- ti,boost-voltage: integer, VBUS voltage level in boost mode (in uV); +- ti,boost-max-current: integer, maximum allowed current draw in boost mode + (in uA). + +Optional properties: +- ti,boost-low-freq: boolean, if present boost mode frequency will be 500kHz, + otherwise 1.5MHz; +- ti,use-ilim-pin: boolean, if present the ILIM resistor will be used and the + input current will be the lower between the resistor setting and the IINLIM + register setting; +- ti,thermal-regulation-threshold: integer, temperature above which the charge + current is lowered, to avoid overheating (in degrees Celsius). If omitted, + the default setting will be used (120 degrees); + +Example: + +bq25890 { + compatible = "ti,bq25890"; + reg = <0x6a>; + + ti,battery-regulation-voltage = <4200000>; + ti,charge-current = <1000000>; + ti,termination-current = <50000>; + ti,precharge-current = <128000>; + ti,minimum-sys-voltage = <3600000>; + ti,boost-voltage = <5000000>; + ti,boost-max-current = <1000000>; + + ti,use-ilim-pin; + ti,thermal-regulation-threshold = <120>; +}; diff --git a/kernel/Documentation/devicetree/bindings/power/da9150-fg.txt b/kernel/Documentation/devicetree/bindings/power/da9150-fg.txt new file mode 100644 index 000000000..00236fe3e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/power/da9150-fg.txt @@ -0,0 +1,23 @@ +Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings + +Required properties: +- compatible: "dlg,da9150-fuel-gauge" for DA9150 Fuel-Gauge Power Supply + +Optional properties: +- dlg,update-interval: Interval time (milliseconds) between battery level checks. +- dlg,warn-soc-level: Battery discharge level (%) where warning event raised. + [1 - 100] +- dlg,crit-soc-level: Battery discharge level (%) where critical event raised. + This value should be lower than the warning level. + [1 - 100] + + +Example: + + fuel-gauge { + compatible = "dlg,da9150-fuel-gauge"; + + dlg,update-interval = <10000>; + dlg,warn-soc-level = /bits/ 8 <15>; + dlg,crit-soc-level = /bits/ 8 <5>; + }; diff --git a/kernel/Documentation/devicetree/bindings/power/opp.txt b/kernel/Documentation/devicetree/bindings/power/opp.txt deleted file mode 100644 index 74499e503..000000000 --- a/kernel/Documentation/devicetree/bindings/power/opp.txt +++ /dev/null @@ -1,25 +0,0 @@ -* Generic OPP Interface - -SoCs have a standard set of tuples consisting of frequency and -voltage pairs that the device will support per voltage domain. These -are called Operating Performance Points or OPPs. - -Properties: -- operating-points: An array of 2-tuples items, and each item consists - of frequency and voltage like <freq-kHz vol-uV>. - freq: clock frequency in kHz - vol: voltage in microvolt - -Examples: - -cpu@0 { - compatible = "arm,cortex-a9"; - reg = <0>; - next-level-cache = <&L2>; - operating-points = < - /* kHz uV */ - 792000 1100000 - 396000 950000 - 198000 850000 - >; -}; diff --git a/kernel/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/kernel/Documentation/devicetree/bindings/power/pd-samsung.txt index 5da38c5ed..4e947372a 100644 --- a/kernel/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/kernel/Documentation/devicetree/bindings/power/pd-samsung.txt @@ -19,9 +19,10 @@ Optional Properties: domains. - clock-names: The following clocks can be specified: - oscclk: Oscillator clock. - - pclkN, clkN: Pairs of parent of input clock and input clock to the - devices in this power domain. Maximum of 4 pairs (N = 0 to 3) - are supported currently. + - clkN: Input clocks to the devices in this power domain. These clocks + will be reparented to oscclk before swithing power domain off. + Their original parent will be brought back after turning on + the domain. Maximum of 4 clocks (N = 0 to 3) are supported. - asbN: Clocks required by asynchronous bridges (ASB) present in the power domain. These clock should be enabled during power domain on/off operations. @@ -42,9 +43,8 @@ Example: mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, - <&clock CLK_MOUT_USER_ACLK333>; - clock-names = "oscclk", "pclk0", "clk0"; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "clk0"; #power-domain-cells = <0>; }; diff --git a/kernel/Documentation/devicetree/bindings/power/power_domain.txt b/kernel/Documentation/devicetree/bindings/power/power_domain.txt index 0f8ed3710..025b5e7df 100644 --- a/kernel/Documentation/devicetree/bindings/power/power_domain.txt +++ b/kernel/Documentation/devicetree/bindings/power/power_domain.txt @@ -48,7 +48,7 @@ Example 2: #power-domain-cells = <1>; }; - child: power-controller@12340000 { + child: power-controller@12341000 { compatible = "foo,power-controller"; reg = <0x12341000 0x1000>; power-domains = <&parent 0>; diff --git a/kernel/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt b/kernel/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt new file mode 100644 index 000000000..0e6d8754e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/power/qcom,coincell-charger.txt @@ -0,0 +1,48 @@ +Qualcomm Coincell Charger: + +The hardware block controls charging for a coincell or capacitor that is +used to provide power backup for certain features of the power management +IC (PMIC) + +- compatible: + Usage: required + Value type: <string> + Definition: must be: "qcom,pm8941-coincell" + +- reg: + Usage: required + Value type: <u32> + Definition: base address of the coincell charger registers + +- qcom,rset-ohms: + Usage: required + Value type: <u32> + Definition: resistance (in ohms) for current-limiting resistor + must be one of: 800, 1200, 1700, 2100 + +- qcom,vset-millivolts: + Usage: required + Value type: <u32> + Definition: voltage (in millivolts) to apply for charging + must be one of: 2500, 3000, 3100, 3200 + +- qcom,charger-disable: + Usage: optional + Value type: <boolean> + Definition: definining this property disables charging + +This charger is a sub-node of one of the 8941 PMIC blocks, and is specified +as a child node in DTS of that node. See ../mfd/qcom,spmi-pmic.txt and +../mfd/qcom-pm8xxx.txt + +Example: + + pm8941@0 { + coincell@2800 { + compatible = "qcom,pm8941-coincell"; + reg = <0x2800>; + + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/kernel/Documentation/devicetree/bindings/power/rockchip-io-domain.txt index 8b70db103..b8627e763 100644 --- a/kernel/Documentation/devicetree/bindings/power/rockchip-io-domain.txt +++ b/kernel/Documentation/devicetree/bindings/power/rockchip-io-domain.txt @@ -33,6 +33,8 @@ Required properties: - compatible: should be one of: - "rockchip,rk3188-io-voltage-domain" for rk3188 - "rockchip,rk3288-io-voltage-domain" for rk3288 + - "rockchip,rk3368-io-voltage-domain" for rk3368 + - "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains - rockchip,grf: phandle to the syscon managing the "general register files" @@ -64,6 +66,18 @@ Possible supplies for rk3288: - sdcard-supply: The supply connected to SDMMC0_VDD. - wifi-supply: The supply connected to APIO3_VDD. Also known as SDIO0. +Possible supplies for rk3368: +- audio-supply: The supply connected to APIO3_VDD. +- dvp-supply: The supply connected to DVPIO_VDD. +- flash0-supply: The supply connected to FLASH0_VDD. Typically for eMMC +- gpio30-supply: The supply connected to APIO1_VDD. +- gpio1830 The supply connected to APIO4_VDD. +- sdcard-supply: The supply connected to SDMMC0_VDD. +- wifi-supply: The supply connected to APIO2_VDD. Also known as SDIO0. + +Possible supplies for rk3368 pmu-domains: +- pmu-supply: The supply connected to PMUIO_VDD. +- vop-supply: The supply connected to LCDC_VDD. Example: diff --git a/kernel/Documentation/devicetree/bindings/power/rt9455_charger.txt b/kernel/Documentation/devicetree/bindings/power/rt9455_charger.txt new file mode 100644 index 000000000..5d9ad5cf2 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/power/rt9455_charger.txt @@ -0,0 +1,48 @@ +Binding for Richtek rt9455 battery charger + +Required properties: +- compatible: it should contain one of the following: + "richtek,rt9455". +- reg: integer, i2c address of the device. +- interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. +- interrupts: interrupt mapping for GPIO IRQ, it should be + configured with IRQ_TYPE_LEVEL_LOW flag. +- richtek,output-charge-current: integer, output current from the charger to the + battery, in uA. +- richtek,end-of-charge-percentage: integer, percent of the output charge current. + When the current in constant-voltage phase drops + below output_charge_current x end-of-charge-percentage, + charge is terminated. +- richtek,battery-regulation-voltage: integer, maximum battery voltage in uV. +- richtek,boost-output-voltage: integer, maximum voltage provided to consumer + devices, when the charger is in boost mode, in uV. + +Optional properties: +- richtek,min-input-voltage-regulation: integer, input voltage level in uV, used to + decrease voltage level when the over current + of the input power source occurs. + This prevents input voltage drop due to insufficient + current provided by the power source. + Default: 4500000 uV (4.5V) +- richtek,avg-input-current-regulation: integer, input current value in uA drained by the + charger from the power source. + Default: 500000 uA (500mA) + +Example: + +rt9455@22 { + compatible = "richtek,rt9455"; + reg = <0x22>; + + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + richtek,output-charge-current = <500000>; + richtek,end-of-charge-percentage = <10>; + richtek,battery-regulation-voltage = <4200000>; + richtek,boost-output-voltage = <5050000>; + + richtek,min-input-voltage-regulation = <4500000>; + richtek,avg-input-current-regulation = <500000>; +}; diff --git a/kernel/Documentation/devicetree/bindings/power/twl-charger.txt b/kernel/Documentation/devicetree/bindings/power/twl-charger.txt index d5c706216..3b4ea1b73 100644 --- a/kernel/Documentation/devicetree/bindings/power/twl-charger.txt +++ b/kernel/Documentation/devicetree/bindings/power/twl-charger.txt @@ -1,5 +1,15 @@ TWL BCI (Battery Charger Interface) +The battery charger needs to interact with the USB phy in order +to know when charging is permissible, and when there is a connection +or disconnection. + +The choice of phy cannot be configured at a hardware level, so there +is no value in explicit configuration in device-tree. Rather +if there is a sibling of the BCI node which is compatible with +"ti,twl4030-usb", then that is used to determine when and how +use USB power for charging. + Required properties: - compatible: - "ti,twl4030-bci" diff --git a/kernel/Documentation/devicetree/bindings/power/wakeup-source.txt b/kernel/Documentation/devicetree/bindings/power/wakeup-source.txt new file mode 100644 index 000000000..963c6dfd4 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -0,0 +1,71 @@ +Specifying wakeup capability for devices +============================================ + +Any device nodes +---------------- +Nodes that describe devices which has wakeup capability must contain an +"wakeup-source" boolean property. + +Also, if device is marked as a wakeup source, then all the primary +interrupt(s) can be used as wakeup interrupt(s). + +However if the devices have dedicated interrupt as the wakeup source +then they need to specify/identify the same using device specific +interrupt name. In such cases only that interrupt can be used as wakeup +interrupt. + +List of legacy properties and respective binding document +--------------------------------------------------------- + +1. "enable-sdio-wakeup" Documentation/devicetree/bindings/mmc/mmc.txt +2. "gpio-key,wakeup" Documentation/devicetree/bindings/input/gpio-keys{,-polled}.txt +3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt +4. "isil,irq2-can-wakeup-machine" Documentation/devicetree/bindings/rtc/isil,isl12057.txt +5. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt + Documentation/devicetree/bindings/mfd/tc3589x.txt + Documentation/devicetree/bindings/input/ads7846.txt +6. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt +7. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt +8. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt + +Examples +-------- + +1. With "wakeup" interrupt name + + device@10000 { + compatible = "vendor,device-id"; + reg = <0x10000 0x1000>; + interrupts = <0 19 4>, <0 21 4>, <0 22 4>; + interrupt-names = "ack", "err", "wakeup"; + wakeup-source; + }; + +2. Without "wakeup" interrupt name + + embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 0>; + interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + wakeup-source; + }; + +3. Without interrupts + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + wakeup-source; + linux,code = <116>; + label = "POWER"; + gpios = <&iofpga_gpio0 0 0x4>; + }; + [....] + }; diff --git a/kernel/Documentation/devicetree/bindings/power_supply/axp20x_usb_power.txt b/kernel/Documentation/devicetree/bindings/power_supply/axp20x_usb_power.txt new file mode 100644 index 000000000..862f4a49d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/power_supply/axp20x_usb_power.txt @@ -0,0 +1,34 @@ +AXP20x USB power supply + +Required Properties: +-compatible: "x-powers,axp202-usb-power-supply" + +This node is a subnode of the axp20x PMIC. + +Example: + +axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + x-powers,dcdc-freq = <1500>; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + ... + }; + + usb-power-supply: usb-power-supply { + compatible = "x-powers,axp202-usb-power-supply"; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/power_supply/max17042_battery.txt b/kernel/Documentation/devicetree/bindings/power_supply/max17042_battery.txt index 5bc9b685c..3f3894aae 100644 --- a/kernel/Documentation/devicetree/bindings/power_supply/max17042_battery.txt +++ b/kernel/Documentation/devicetree/bindings/power_supply/max17042_battery.txt @@ -9,10 +9,23 @@ Optional properties : (datasheet-recommended value is 10000). Defining this property enables current-sense functionality. +Optional threshold properties : + If skipped the condition won't be reported. + - maxim,cold-temp : Temperature threshold to report battery + as cold (in tenths of degree Celsius). + - maxim,over-heat-temp : Temperature threshold to report battery + as over heated (in tenths of degree Celsius). + - maxim,dead-volt : Voltage threshold to report battery + as dead (in mV). + - maxim,over-volt : Voltage threshold to report battery + as over voltage (in mV). + Example: battery-charger@36 { compatible = "maxim,max17042"; reg = <0x36>; maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,over-volt = <4300>; }; diff --git a/kernel/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt b/kernel/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt new file mode 100644 index 000000000..65b88fac8 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/power_supply/qcom_smbb.txt @@ -0,0 +1,131 @@ +Qualcomm Switch-Mode Battery Charger and Boost + +PROPERTIES +- compatible: + Usage: required + Value type: <stringlist> + Description: Must be one of: + - "qcom,pm8941-charger" + +- reg: + Usage: required + Value type: <prop-encoded-array> + Description: Base address of registers for SMBB block + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Description: The format of the specifier is defined by the binding document + describing the node's interrupt parent. Must contain one + specifier for each of the following interrupts, in order: + - charge done + - charge fast mode + - charge trickle mode + - battery temperature ok + - battery present + - charger disconnected + - USB-in valid + - DC-in valid + +- interrupt-names: + Usage: required + Value type: <stringlist> + Description: Must contain the following list, strictly ordered: + "chg-done", + "chg-fast", + "chg-trkl", + "bat-temp-ok", + "bat-present", + "chg-gone", + "usb-valid", + "dc-valid" + +- qcom,fast-charge-current-limit: + Usage: optional (default: 1A, or pre-configured value) + Value type: <u32>; uA; range [100mA : 3A] + Description: Maximum charge current; May be clamped to safety limits. + +- qcom,fast-charge-low-threshold-voltage: + Usage: optional (default: 3.2V, or pre-configured value) + Value type: <u32>; uV; range [2.1V : 3.6V] + Description: Battery voltage limit above which fast charging may operate; + Below this value linear or switch-mode auto-trickle-charging + will operate. + +- qcom,fast-charge-high-threshold-voltage: + Usage: optional (default: 4.2V, or pre-configured value) + Value type: <u32>; uV; range [3.24V : 5V] + Description: Battery voltage limit below which fast charging may operate; + The fast charger will attempt to charge the battery to this + voltage. May be clamped to safety limits. + +- qcom,fast-charge-safe-voltage: + Usage: optional (default: 4.2V, or pre-configured value) + Value type: <u32>; uV; range [3.24V : 5V] + Description: Maximum safe battery voltage; May be pre-set by bootloader, in + which case, setting this will harmlessly fail. The property + 'fast-charge-high-watermark' will be clamped by this value. + +- qcom,fast-charge-safe-current: + Usage: optional (default: 1A, or pre-configured value) + Value type: <u32>; uA; range [100mA : 3A] + Description: Maximum safe battery charge current; May pre-set by bootloader, + in which case, setting this will harmlessly fail. The property + 'qcom,fast-charge-current-limit' will be clamped by this value. + +- qcom,auto-recharge-threshold-voltage: + Usage: optional (default: 4.1V, or pre-configured value) + Value type: <u32>; uV; range [3.24V : 5V] + Description: Battery voltage limit below which auto-recharge functionality + will restart charging after end-of-charge; The high cutoff + limit for auto-recharge is 5% above this value. + +- qcom,minimum-input-voltage: + Usage: optional (default: 4.3V, or pre-configured value) + Value type: <u32>; uV; range [4.2V : 9.6V] + Description: Input voltage level above which charging may operate + +- qcom,dc-current-limit: + Usage: optional (default: 100mA, or pre-configured value) + Value type: <u32>; uA; range [100mA : 2.5A] + Description: Default DC charge current limit + +- qcom,disable-dc: + Usage: optional (default: false) + Value type: boolean: <u32> or <empty> + Description: Disable DC charger + +- qcom,jeita-extended-temp-range: + Usage: optional (default: false) + Value type: boolean: <u32> or <empty> + Description: Enable JEITA extended temperature range; This does *not* + adjust the maximum charge voltage or current in the extended + temperature range. It only allows charging when the battery + is in the extended temperature range. Voltage/current + regulation must be done externally to fully comply with + the JEITA safety guidelines if this flag is set. + +EXAMPLE +charger@1000 { + compatible = "qcom,pm8941-charger"; + reg = <0x1000 0x700>; + interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "chg-done", + "chg-fast", + "chg-trkl", + "bat-temp-ok", + "bat-present", + "chg-gone", + "usb-valid", + "dc-valid"; + + qcom,fast-charge-current-limit = <1000000>; + qcom,dc-charge-current-limit = <1000000>; +}; diff --git a/kernel/Documentation/devicetree/bindings/power_supply/tps65217_charger.txt b/kernel/Documentation/devicetree/bindings/power_supply/tps65217_charger.txt new file mode 100644 index 000000000..98d131ace --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/power_supply/tps65217_charger.txt @@ -0,0 +1,12 @@ +TPS65217 Charger + +Required Properties: +-compatible: "ti,tps65217-charger" + +This node is a subnode of the tps65217 PMIC. + +Example: + + tps65217-charger { + compatible = "ti,tps65090-charger"; + }; diff --git a/kernel/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/kernel/Documentation/devicetree/bindings/powerpc/fsl/fman.txt index edda55f74..1fc5328c0 100644 --- a/kernel/Documentation/devicetree/bindings/powerpc/fsl/fman.txt +++ b/kernel/Documentation/devicetree/bindings/powerpc/fsl/fman.txt @@ -189,6 +189,19 @@ PROPERTIES Definition: There is one reg region describing the port configuration registers. +- fsl,fman-10g-port + Usage: optional + Value type: boolean + Definition: The default port rate is 1G. + If this property exists, the port is s 10G port. + +- fsl,fman-best-effort-port + Usage: optional + Value type: boolean + Definition: Can be defined only if 10G-support is set. + This property marks a best-effort 10G port (10G port that + may not be capable of line rate). + EXAMPLE port@a8000 { diff --git a/kernel/Documentation/devicetree/bindings/powerpc/fsl/guts.txt b/kernel/Documentation/devicetree/bindings/powerpc/fsl/guts.txt index 7f150b501..b71b2039e 100644 --- a/kernel/Documentation/devicetree/bindings/powerpc/fsl/guts.txt +++ b/kernel/Documentation/devicetree/bindings/powerpc/fsl/guts.txt @@ -9,6 +9,11 @@ Required properties: - compatible : Should define the compatible device type for global-utilities. + Possible compatibles: + "fsl,qoriq-device-config-1.0" + "fsl,qoriq-device-config-2.0" + "fsl,<chip>-device-config" + "fsl,<chip>-guts" - reg : Offset and length of the register set for the device. Recommended properties: diff --git a/kernel/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt b/kernel/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt index 8832e8798..647817527 100644 --- a/kernel/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt +++ b/kernel/Documentation/devicetree/bindings/powerpc/fsl/mpc5121-psc.txt @@ -6,14 +6,14 @@ PSC in UART mode For PSC in UART mode the needed PSC serial devices are specified by fsl,mpc5121-psc-uart nodes in the fsl,mpc5121-immr SoC node. Additionally the PSC FIFO -Controller node fsl,mpc5121-psc-fifo is requered there: +Controller node fsl,mpc5121-psc-fifo is required there: -fsl,mpc5121-psc-uart nodes +fsl,mpc512x-psc-uart nodes -------------------------- Required properties : - - compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc" - - cell-index : Index of the PSC in hardware + - compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc" + Supported <soc>s: mpc5121, mpc5125 - reg : Offset and length of the register set for the PSC device - interrupts : <a b> where a is the interrupt number of the PSC FIFO Controller and b is a field that represents an @@ -25,12 +25,21 @@ Recommended properties : - fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4) - fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4) +PSC in SPI mode +--------------- -fsl,mpc5121-psc-fifo node +Similar to the UART mode a PSC can be operated in SPI mode. The compatible used +for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well. +The required and recommended properties are identical to the +fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible +string. + +fsl,mpc512x-psc-fifo node ------------------------- Required properties : - - compatible : Should be "fsl,mpc5121-psc-fifo" + - compatible : Should be "fsl,<soc>-psc-fifo" + Supported <soc>s: mpc5121, mpc5125 - reg : Offset and length of the register set for the PSC FIFO Controller - interrupts : <a b> where a is the interrupt number of the @@ -39,6 +48,9 @@ Required properties : - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. +Recommended properties : + - clocks : specifies the clock needed to operate the fifo controller + - clock-names : name(s) for the clock(s) listed in clocks Example for a board using PSC0 and PSC1 devices in serial mode: diff --git a/kernel/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt b/kernel/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt new file mode 100644 index 000000000..b3b392fe1 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/powerpc/fsl/mpc512x_lpbfifo.txt @@ -0,0 +1,21 @@ +Freescale MPC512x LocalPlus Bus FIFO (called SCLPC in the Reference Manual) + +Required properties: +- compatible: should be "fsl,mpc512x-lpbfifo"; +- reg: should contain the offset and length of SCLPC register set; +- interrupts: should contain the interrupt specifier for SCLPC; syntax of an + interrupt client node is described in interrupt-controller/interrupts.txt; +- dmas: should contain the DMA specifier for SCLPC as described at + dma/dma.txt and dma/mpc512x-dma.txt; +- dma-names: should be "rx-tx"; + +Example: + + sclpc@10100 { + compatible = "fsl,mpc512x-lpbfifo"; + reg = <0x10100 0x50>; + interrupts = <7 0x8>; + dmas = <&dma0 26>; + dma-names = "rx-tx"; + }; + diff --git a/kernel/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt b/kernel/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt new file mode 100644 index 000000000..0532c46b3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/powerpc/fsl/scfg.txt @@ -0,0 +1,18 @@ +Freescale Supplement configuration unit (SCFG) + +SCFG is the supplemental configuration unit, that provides SoC specific +configuration and status registers for the chip. Such as getting PEX port +status. + +Required properties: + +- compatible: should be "fsl,<chip>-scfg" +- reg: should contain base address and length of SCFG memory-mapped +registers + +Example: + + scfg: global-utilities@fc000 { + compatible = "fsl,t1040-scfg"; + reg = <0xfc000 0x1000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt b/kernel/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt new file mode 100644 index 000000000..d9254a6da --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.txt @@ -0,0 +1,20 @@ +Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller) + +Required properties: + +- compatible: must be "brcm,bcm7038-pwm" +- reg: physical base address and length for this controller +- #pwm-cells: should be 2. See pwm.txt in this directory for a description + of the cells format +- clocks: a phandle to the reference clock for this block which is fed through + its internal variable clock frequency generator + + +Example: + + pwm: pwm@f0408000 { + compatible = "brcm,bcm7038-pwm"; + reg = <0xf0408000 0x28>; + #pwm-cells = <2>; + clocks = <&upg_fixed>; + }; diff --git a/kernel/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt b/kernel/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt new file mode 100644 index 000000000..36e49d432 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt @@ -0,0 +1,20 @@ +* NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver + +Required properties: + - compatible: Should be "nxp,lpc1850-sct-pwm" + - reg: Should contain physical base address and length of pwm registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clock/clock-bindings.txt for details. + - clock-names: Must include the following entries. + - pwm: PWM operating clock. + - #pwm-cells: Should be 3. See pwm.txt in this directory for the description + of the cells format. + +Example: + pwm: pwm@40000000 { + compatible = "nxp,lpc1850-sct-pwm"; + reg = <0x40000000 0x1000>; + clocks =<&ccu1 CLK_CPU_SCT>; + clock-names = "pwm"; + #pwm-cells = <3>; + }; diff --git a/kernel/Documentation/devicetree/bindings/pwm/pwm-berlin.txt b/kernel/Documentation/devicetree/bindings/pwm/pwm-berlin.txt new file mode 100644 index 000000000..82cbe16fc --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pwm/pwm-berlin.txt @@ -0,0 +1,17 @@ +Berlin PWM controller + +Required properties: +- compatible: should be "marvell,berlin-pwm" +- reg: physical base address and length of the controller's registers +- clocks: phandle to the input clock +- #pwm-cells: should be 3. See pwm.txt in this directory for a description of + the cells format. + +Example: + +pwm: pwm@f7f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf7f20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; +} diff --git a/kernel/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/kernel/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt new file mode 100644 index 000000000..f8f59baf6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt @@ -0,0 +1,42 @@ +MediaTek display PWM controller + +Required properties: + - compatible: should be "mediatek,<name>-disp-pwm": + - "mediatek,mt8173-disp-pwm": found on mt8173 SoC. + - "mediatek,mt6595-disp-pwm": found on mt6595 SoC. + - reg: physical base address and length of the controller's registers. + - #pwm-cells: must be 2. See pwm.txt in this directory for a description of + the cell format. + - clocks: phandle and clock specifier of the PWM reference clock. + - clock-names: must contain the following: + - "main": clock used to generate PWM signals. + - "mm": sync signals from the modules of mmsys. + - pinctrl-names: Must contain a "default" entry. + - pinctrl-0: One property must exist for each entry in pinctrl-names. + See pinctrl/pinctrl-bindings.txt for details of the property values. + +Example: + pwm0: pwm@1401e000 { + compatible = "mediatek,mt8173-disp-pwm", + "mediatek,mt6595-disp-pwm"; + reg = <0 0x1401e000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_DISP_PWM026M>, + <&mmsys CLK_MM_DISP_PWM0MM>; + clock-names = "main", "mm"; + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm0_pins>; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 1000000>; + brightness-levels = < + 0 16 32 48 64 80 96 112 + 128 144 160 176 192 208 224 240 + 255 + >; + default-brightness-level = <9>; + power-supply = <&mt6397_vio18_reg>; + enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; + }; diff --git a/kernel/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/kernel/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt index ae0273e19..cf6068b8e 100644 --- a/kernel/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt +++ b/kernel/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt @@ -3,6 +3,8 @@ Allwinner sun4i and sun7i SoC PWM controller Required properties: - compatible: should be one of: - "allwinner,sun4i-a10-pwm" + - "allwinner,sun5i-a10s-pwm" + - "allwinner,sun5i-a13-pwm" - "allwinner,sun7i-a20-pwm" - reg: physical base address and length of the controller's registers - #pwm-cells: should be 3. See pwm.txt in this directory for a description of diff --git a/kernel/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt b/kernel/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt new file mode 100644 index 000000000..0822a083f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.txt @@ -0,0 +1,26 @@ +* Renesas R-Car PWM Timer Controller + +Required Properties: +- compatible: should be "renesas,pwm-rcar" and one of the following. + - "renesas,pwm-r8a7778": for R-Car M1A + - "renesas,pwm-r8a7779": for R-Car H1 + - "renesas,pwm-r8a7790": for R-Car H2 + - "renesas,pwm-r8a7791": for R-Car M2-W + - "renesas,pwm-r8a7794": for R-Car E2 +- reg: base address and length of the registers block for the PWM. +- #pwm-cells: should be 2. See pwm.txt in this directory for a description of + the cells format. +- clocks: clock phandle and specifier pair. +- pinctrl-0: phandle, referring to a default pin configuration node. +- pinctrl-names: Set to "default". + +Example: R8A7790 (R-Car H2) PWM Timer node + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&mstp5_clks R8A7790_CLK_PWM>; + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + }; diff --git a/kernel/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index e91485d11..6067d9830 100644 --- a/kernel/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/kernel/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -8,6 +8,8 @@ Required properties: Optional properties: - system-power-controller: Telling whether or not this pmic is controlling the system power. See Documentation/devicetree/bindings/power/power-controller.txt . +- active-semi,vsel-high: Indicates the VSEL pin is high. + If this property is missing, assume the VSEL pin is low(0). Optional input supply properties: - for act8600: @@ -49,6 +51,7 @@ Example: pmic: act8865@5b { compatible = "active-semi,act8865"; reg = <0x5b>; + active-semi,vsel-high; status = "disabled"; regulators { diff --git a/kernel/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/anatop-regulator.txt index 758eae240..37c4ea076 100644 --- a/kernel/Documentation/devicetree/bindings/regulator/anatop-regulator.txt +++ b/kernel/Documentation/devicetree/bindings/regulator/anatop-regulator.txt @@ -13,6 +13,7 @@ Optional properties: - anatop-delay-reg-offset: Anatop MFD step time register offset - anatop-delay-bit-shift: Bit shift for the step time register - anatop-delay-bit-width: Number of bits used in the step time register +- vin-supply: The supply for this regulator Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. diff --git a/kernel/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/arizona-regulator.txt new file mode 100644 index 000000000..443564d77 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/regulator/arizona-regulator.txt @@ -0,0 +1,17 @@ +Cirrus Logic Arizona class audio SoCs + +These devices are audio SoCs with extensive digital capabilities and a range +of analogue I/O. + +This document lists regulator specific bindings, see the primary binding +document: + ../mfd/arizona.txt + +Optional properties: + - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA + +Optional subnodes: + - ldo1 : Initial data for the LDO1 regulator, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt + - micvdd : Initial data for the MICVDD regulator, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt diff --git a/kernel/Documentation/devicetree/bindings/regulator/da9210.txt b/kernel/Documentation/devicetree/bindings/regulator/da9210.txt index 3297c53cb..7aa9b1fa6 100644 --- a/kernel/Documentation/devicetree/bindings/regulator/da9210.txt +++ b/kernel/Documentation/devicetree/bindings/regulator/da9210.txt @@ -5,6 +5,10 @@ Required properties: - compatible: must be "dlg,da9210" - reg: the i2c slave address of the regulator. It should be 0x68. +Optional properties: + +- interrupts: a reference to the DA9210 interrupt, if available. + Any standard regulator properties can be used to configure the single da9210 DCDC. diff --git a/kernel/Documentation/devicetree/bindings/regulator/da9211.txt b/kernel/Documentation/devicetree/bindings/regulator/da9211.txt index eb618907c..c620493e8 100644 --- a/kernel/Documentation/devicetree/bindings/regulator/da9211.txt +++ b/kernel/Documentation/devicetree/bindings/regulator/da9211.txt @@ -1,7 +1,7 @@ -* Dialog Semiconductor DA9211/DA9213 Voltage Regulator +* Dialog Semiconductor DA9211/DA9213/DA9215 Voltage Regulator Required properties: -- compatible: "dlg,da9211" or "dlg,da9213". +- compatible: "dlg,da9211" or "dlg,da9213" or "dlg,da9215" - reg: I2C slave address, usually 0x68. - interrupts: the interrupt outputs of the controller - regulators: A node that houses a sub-node for each regulator within the @@ -66,3 +66,31 @@ Example 2) DA9213 }; }; }; + + +Example 3) DA9215 + pmic: da9215@68 { + compatible = "dlg,da9215"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + diff --git a/kernel/Documentation/devicetree/bindings/regulator/max77686.txt b/kernel/Documentation/devicetree/bindings/regulator/max77686.txt new file mode 100644 index 000000000..0dded64d8 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/regulator/max77686.txt @@ -0,0 +1,71 @@ +Binding for Maxim MAX77686 regulators + +This is a part of the device tree bindings of MAX77686 multi-function device. +More information can be found in ../mfd/max77686.txt file. + +The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO) +regulators that can be controlled over I2C. + +Following properties should be present in main device node of the MFD chip. + +Optional node: +- voltage-regulators : The regulators of max77686 have to be instantiated + under subnode named "voltage-regulators" using the following format. + + regulator_name { + regulator-compatible = LDOn/BUCKn + standard regulator constraints.... + }; + refer Documentation/devicetree/bindings/regulator/regulator.txt + + The regulator node's name should be initialized with a string +to get matched with their hardware counterparts as follow: + + -LDOn : for LDOs, where n can lie in range 1 to 26. + example: LDO1, LDO2, LDO26. + -BUCKn : for BUCKs, where n can lie in range 1 to 9. + example: BUCK1, BUCK5, BUCK9. + + Regulators which can be turned off during system suspend: + -LDOn : 2, 6-8, 10-12, 14-16, + -BUCKn : 1-4. + Use standard regulator bindings for it ('regulator-off-in-suspend'). + + LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable + control. To turn this feature on this property must be added to the regulator + sub-node: + - maxim,ena-gpios : one GPIO specifier enable control (the gpio + flags are actually ignored and always + ACTIVE_HIGH is used) + +Example: + + max77686: pmic@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 IRQ_TYPE_NONE>; + reg = <0x09>; + + voltage-regulators { + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/regulator/max77802.txt b/kernel/Documentation/devicetree/bindings/regulator/max77802.txt index 79e547644..09d796ed4 100644 --- a/kernel/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/kernel/Documentation/devicetree/bindings/regulator/max77802.txt @@ -8,7 +8,28 @@ regulators that can be controlled over I2C. Following properties should be present in main device node of the MFD chip. -Optional node: +Optional properties: +- inb1-supply: The input supply for BUCK1 +- inb2-supply: The input supply for BUCK2 +- inb3-supply: The input supply for BUCK3 +- inb4-supply: The input supply for BUCK4 +- inb5-supply: The input supply for BUCK5 +- inb6-supply: The input supply for BUCK6 +- inb7-supply: The input supply for BUCK7 +- inb8-supply: The input supply for BUCK8 +- inb9-supply: The input supply for BUCK9 +- inb10-supply: The input supply for BUCK10 +- inl1-supply: The input supply for LDO8 and LDO15 +- inl2-supply: The input supply for LDO17, LDO27, LDO30 and LDO35 +- inl3-supply: The input supply for LDO3, LDO5, LDO6 and LDO7 +- inl4-supply: The input supply for LDO10, LDO11, LDO13 and LDO14 +- inl5-supply: The input supply for LDO9 and LDO19 +- inl6-supply: The input supply for LDO4, LDO21, LDO24 and LDO33 +- inl7-supply: The input supply for LDO18, LDO20, LDO28 and LDO29 +- inl9-supply: The input supply for LDO12, LDO23, LDO25, LDO26, LDO32 and LDO34 +- inl10-supply: The input supply for LDO1 and LDO2 + +Optional nodes: - regulators : The regulators of max77802 have to be instantiated under subnode named "regulators" using the following format. @@ -58,6 +79,8 @@ Example: #address-cells = <1>; #size-cells = <0>; + inb1-supply = <&parent_reg>; + regulators { ldo1_reg: LDO1 { regulator-name = "vdd_1v0"; diff --git a/kernel/Documentation/devicetree/bindings/regulator/max8973-regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/max8973-regulator.txt index 4f15d8a1b..f80ea2fe2 100644 --- a/kernel/Documentation/devicetree/bindings/regulator/max8973-regulator.txt +++ b/kernel/Documentation/devicetree/bindings/regulator/max8973-regulator.txt @@ -2,12 +2,36 @@ Required properties: -- compatible: must be "maxim,max8973" +- compatible: must be one of following: + "maxim,max8973" + "maxim,max77621". - reg: the i2c slave address of the regulator. It should be 0x1b. Any standard regulator properties can be used to configure the single max8973 DCDC. +Optional properties: + +-maxim,externally-enable: boolean, externally control the regulator output + enable/disable. +-maxim,enable-gpio: GPIO for enable control. If the valid GPIO is provided + then externally enable control will be considered. +-maxim,dvs-gpio: GPIO which is connected to DVS pin of device. +-maxim,dvs-default-state: Default state of GPIO during initialisation. + 1 for HIGH and 0 for LOW. +-maxim,enable-remote-sense: boolean, enable reote sense. +-maxim,enable-falling-slew-rate: boolean, enable falling slew rate. +-maxim,enable-active-discharge: boolean: enable active discharge. +-maxim,enable-frequency-shift: boolean, enable 9% frequency shift. +-maxim,enable-bias-control: boolean, enable bias control. By enabling this + startup delay can be reduce to 20us from 220us. +-maxim,enable-etr: boolean, enable Enhanced Transient Response. +-maxim,enable-high-etr-sensitivity: boolean, Enhanced transient response + circuit is enabled and set for high sensitivity. If this + property is available then etr will be enable default. + +Enhanced transient response (ETR) will affect the configuration of CKADV. + Example: max8973@1b { diff --git a/kernel/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt new file mode 100644 index 000000000..02649d8b3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/regulator/mt6311-regulator.txt @@ -0,0 +1,35 @@ +Mediatek MT6311 Regulator Driver + +Required properties: +- compatible: "mediatek,mt6311-regulator" +- reg: I2C slave address, usually 0x6b. +- regulators: List of regulators provided by this controller. It is named + to VDVFS and VBIASN. + The definition for each of these nodes is defined using the standard binding + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are: +BUCK: + VDVFS +LDO: + VBIASN + +Example: + mt6311: pmic@6b { + compatible = "mediatek,mt6311-regulator"; + reg = <0x6b>; + + regulators { + mt6311_vcpu_reg: VDVFS { + regulator-name = "VDVFS"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <10000>; + }; + mt6311_ldo_reg: VBIASN { + regulator-name = "VBIASN"; + regulator-min-microvolt = <200000>; + regulator-max-microvolt = <800000>; + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/pbias-regulator.txt index 32aa26f1e..acbcb452a 100644 --- a/kernel/Documentation/devicetree/bindings/regulator/pbias-regulator.txt +++ b/kernel/Documentation/devicetree/bindings/regulator/pbias-regulator.txt @@ -2,7 +2,12 @@ PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs. Required properties: - compatible: - - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7. + - should be "ti,pbias-dra7" for DRA7 + - should be "ti,pbias-omap2" for OMAP2 + - should be "ti,pbias-omap3" for OMAP3 + - should be "ti,pbias-omap4" for OMAP4 + - should be "ti,pbias-omap5" for OMAP5 + - "ti,pbias-omap" is deprecated - reg: pbias register offset from syscon base and size of pbias register. - syscon : phandle of the system control module - regulator-name : should be diff --git a/kernel/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/pwm-regulator.txt index ce91f61fe..ed936f0f3 100644 --- a/kernel/Documentation/devicetree/bindings/regulator/pwm-regulator.txt +++ b/kernel/Documentation/devicetree/bindings/regulator/pwm-regulator.txt @@ -1,27 +1,68 @@ -pwm regulator bindings +Bindings for the Generic PWM Regulator +====================================== + +Currently supports 2 modes of operation: + +Voltage Table: When in this mode, a voltage table (See below) of + predefined voltage <=> duty-cycle values must be + provided via DT. Limitations are that the regulator can + only operate at the voltages supplied in the table. + Intermediary duty-cycle values which would normally + allow finer grained voltage selection are ignored and + rendered useless. Although more control is given to + the user if the assumptions made in continuous-voltage + mode do not reign true. + +Continuous Voltage: This mode uses the regulator's maximum and minimum + supplied voltages specified in the + regulator-{min,max}-microvolt properties to calculate + appropriate duty-cycle values. This allows for a much + more fine grained solution when compared with + voltage-table mode above. This solution does make an + assumption that a %50 duty-cycle value will cause the + regulator voltage to run at half way between the + supplied max_uV and min_uV values. Required properties: -- compatible: Should be "pwm-regulator" -- pwms: OF device-tree PWM specification (see PWM binding pwm.txt) -- voltage-table: voltage and duty table, include 2 members in each set of - brackets, first one is voltage(unit: uv), the next is duty(unit: percent) +-------------------- +- compatible: Should be "pwm-regulator" + +- pwms: PWM specification (See: ../pwm/pwm.txt) + +Only required for Voltage Table Mode: +- voltage-table: Voltage and Duty-Cycle table consisting of 2 cells + First cell is voltage in microvolts (uV) + Second cell is duty-cycle in percent (%) + +NB: To be clear, if voltage-table is provided, then the device will be used +in Voltage Table Mode. If no voltage-table is provided, then the device will +be used in Continuous Voltage Mode. -Any property defined as part of the core regulator binding defined in -regulator.txt can also be used. +Any property defined as part of the core regulator binding can also be used. +(See: ../regulator/regulator.txt) -Example: +Continuous Voltage Example: pwm_regulator { compatible = "pwm-regulator; pwms = <&pwm1 0 8448 0>; + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + }; +Voltage Table Example: + pwm_regulator { + compatible = "pwm-regulator; + pwms = <&pwm1 0 8448 0>; + regulator-min-microvolt = <1016000>; + regulator-max-microvolt = <1114000>; + regulator-name = "vdd_logic"; + + /* Voltage Duty-Cycle */ voltage-table = <1114000 0>, <1095000 10>, <1076000 20>, <1056000 30>, <1036000 40>, <1016000 50>; - - regulator-min-microvolt = <1016000>; - regulator-max-microvolt = <1114000>; - regulator-name = "vdd_logic"; }; diff --git a/kernel/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt new file mode 100644 index 000000000..d00bfd862 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -0,0 +1,173 @@ +Qualcomm SPMI Regulators + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,pm8841-regulators" + "qcom,pm8916-regulators" + "qcom,pm8941-regulators" + +- interrupts: + Usage: optional + Value type: <prop-encoded-array> + Definition: List of OCP interrupts. + +- interrupt-names: + Usage: required if 'interrupts' property present + Value type: <string-array> + Definition: List of strings defining the names of the + interrupts in the 'interrupts' property 1-to-1. + Supported values are "ocp-<regulator_name>", where + <regulator_name> corresponds to a voltage switch + type regulator. + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: + Usage: optional (pm8841 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_l1_l3-supply: +- vdd_l2-supply: +- vdd_l4_l5_l6-supply: +- vdd_l7-supply: +- vdd_l8_l11_l14_l15_l16-supply: +- vdd_l9_l10_l12_l13_l17_l18-supply: + Usage: optional (pm8916 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_l1_l3-supply: +- vdd_l2_lvs_1_2_3-supply: +- vdd_l4_l11-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l14_l15-supply: +- vdd_l8_l16_l18_19-supply: +- vdd_l9_l10_l17_l22-supply: +- vdd_l13_l20_l23_l24-supply: +- vdd_l21-supply: +- vin_5vs-supply: + Usage: optional (pm8941 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + + +The regulator node houses sub-nodes for each regulator within the device. Each +sub-node is identified using the node's name, with valid values listed for each +of the PMICs below. + +pm8841: + s1, s2, s3, s4, s5, s6, s7, s8 + +pm8916: + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l16, l17, l18 + +pm8941: + s1, s2, s3, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, + l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3, + mvs1, mvs2 + +The content of each sub-node is defined by the standard binding for regulators - +see regulator.txt - with additional custom properties described below: + +- regulator-initial-mode: + Usage: optional + Value type: <u32> + Description: 2 = Set initial mode to auto mode (automatically select + between HPM and LPM); not available on boost type + regulators. + + 1 = Set initial mode to high power mode (HPM), also referred + to as NPM. HPM consumes more ground current than LPM, but + it can source significantly higher load current. HPM is not + available on boost type regulators. For voltage switch type + regulators, HPM implies that over current protection and + soft start are active all the time. + + 0 = Set initial mode to low power mode (LPM). + +- qcom,ocp-max-retries: + Usage: optional + Value type: <u32> + Description: Maximum number of times to try toggling a voltage switch + off and back on as a result of consecutive over current + events. + +- qcom,ocp-retry-delay: + Usage: optional + Value type: <u32> + Description: Time to delay in milliseconds between each voltage switch + toggle after an over current event takes place. + +- qcom,pin-ctrl-enable: + Usage: optional + Value type: <u32> + Description: Bit mask specifying which hardware pins should be used to + enable the regulator, if any; supported bits are: + 0 = ignore all hardware enable signals + BIT(0) = follow HW0_EN signal + BIT(1) = follow HW1_EN signal + BIT(2) = follow HW2_EN signal + BIT(3) = follow HW3_EN signal + +- qcom,pin-ctrl-hpm: + Usage: optional + Value type: <u32> + Description: Bit mask specifying which hardware pins should be used to + force the regulator into high power mode, if any; + supported bits are: + 0 = ignore all hardware enable signals + BIT(0) = follow HW0_EN signal + BIT(1) = follow HW1_EN signal + BIT(2) = follow HW2_EN signal + BIT(3) = follow HW3_EN signal + BIT(4) = follow PMIC awake state + +- qcom,vs-soft-start-strength: + Usage: optional + Value type: <u32> + Description: This property sets the soft start strength for voltage + switch type regulators; supported values are: + 0 = 0.05 uA + 1 = 0.25 uA + 2 = 0.55 uA + 3 = 0.75 uA + +Example: + + regulators { + compatible = "qcom,pm8941-regulators"; + vdd_l1_l3-supply = <&s1>; + + s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1400000>; + }; + + ... + + l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + .... + }; diff --git a/kernel/Documentation/devicetree/bindings/regulator/regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/regulator.txt index abb26b58c..1d112fc45 100644 --- a/kernel/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/kernel/Documentation/devicetree/bindings/regulator/regulator.txt @@ -7,18 +7,21 @@ Optional properties: - regulator-microvolt-offset: Offset applied to voltages to compensate for voltage drops - regulator-min-microamp: smallest current consumers may set - regulator-max-microamp: largest current consumers may set +- regulator-input-current-limit-microamp: maximum input current regulator allows - regulator-always-on: boolean, regulator should never be disabled - regulator-boot-on: bootloader/firmware enabled regulator - regulator-allow-bypass: allow the regulator to go into bypass mode +- regulator-allow-set-load: allow the regulator performance level to be configured - <name>-supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) For hardware which supports disabling ramp rate, it should be explicitly - intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay. + initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay. - regulator-enable-ramp-delay: The time taken, in microseconds, for the supply rail to reach the target voltage, plus/minus whatever tolerance the board design requires. This property describes the total system ramp time required due to the combination of internal ramping of the regulator itself, and board design issues such as trace capacitance and load on the supply. +- regulator-soft-start: Enable soft start so that voltage ramps slowly - regulator-state-mem sub-root node for Suspend-to-RAM mode : suspend to memory, the device goes to sleep, but all data stored in memory, only some external interrupt can wake the device. @@ -37,6 +40,10 @@ Optional properties: - regulator-initial-mode: initial operating mode. The set of possible operating modes depends on the capabilities of every hardware so each device binding documentation explains which values the regulator supports. +- regulator-system-load: Load in uA present on regulator that is not captured by + any consumer request. +- regulator-pull-down: Enable pull down resistor when the regulator is disabled. +- regulator-over-current-protection: Enable over current protection. Deprecated properties: - regulator-compatible: If a regulator chip contains multiple diff --git a/kernel/Documentation/devicetree/bindings/regulator/tps65023.txt b/kernel/Documentation/devicetree/bindings/regulator/tps65023.txt new file mode 100644 index 000000000..a4714e4da --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/regulator/tps65023.txt @@ -0,0 +1,60 @@ +TPS65023 family of regulators + +Required properties: +- compatible: Must be one of the following. + "ti,tps65020", + "ti,tps65021", + "ti,tps65023", +- reg: I2C slave address +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: VDCDC[1-3] and LDO[1-2] +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. The definition for each of + these nodes is defined using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps65023@48 { + compatible = "ti,tps65023"; + reg = <0x48>; + + regulators { + VDCDC1 { + regulator-name = "vdd_mpu"; + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + VDCDC2 { + regulator-name = "vdd_core"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + VDCDC3 { + regulator-name = "vdd_io"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO1 { + regulator-name = "vdd_usb18"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO2 { + regulator-name = "vdd_usb33"; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt b/kernel/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt new file mode 100644 index 000000000..3a7007379 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/remoteproc/wkup_m3_rproc.txt @@ -0,0 +1,52 @@ +TI Wakeup M3 Remoteproc Driver +============================== + +The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor +(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks +that cannot be controlled from the MPU. This CM3 processor requires a firmware +binary to accomplish this. The wkup_m3 remoteproc driver handles the loading of +the firmware and booting of the CM3. + +Wkup M3 Device Node: +==================== +A wkup_m3 device node is used to represent the Wakeup M3 processor instance +within the SoC. It is added as a child node of the parent interconnect bus +(l4_wkup) through which it is accessible to the MPU. + +Required properties: +-------------------- +- compatible: Should be one of, + "ti,am3352-wkup-m3" for AM33xx SoCs + "ti,am4372-wkup-m3" for AM43xx SoCs +- reg: Should contain the address ranges for the two internal + memory regions, UMEM and DMEM. The parent node should + provide an appropriate ranges property for properly + translating these into bus addresses. +- reg-names: Contains the corresponding names for the two memory + regions. These should be named "umem" & "dmem". +- ti,hwmods: Name of the hwmod associated with the wkupm3 device. +- ti,pm-firmware: Name of firmware file to be used for loading and + booting the wkup_m3 remote processor. + +Example: +-------- +/* AM33xx */ +ocp { + l4_wkup: l4_wkup@44c00000 { + compatible = "am335-l4-wkup", "simple-bus"; + ranges = <0 0x44c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + + wkup_m3: wkup_m3@100000 { + compatible = "ti,am3352-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; + }; + + ... +}; diff --git a/kernel/Documentation/devicetree/bindings/reset/ath79-reset.txt b/kernel/Documentation/devicetree/bindings/reset/ath79-reset.txt new file mode 100644 index 000000000..4c56330bf --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/reset/ath79-reset.txt @@ -0,0 +1,20 @@ +Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required Properties: +- compatible: has to be "qca,<soctype>-reset", "qca,ar7100-reset" + as fallback +- reg: Base address and size of the controllers memory area +- #reset-cells : Specifies the number of cells needed to encode reset + line, should be 1 + +Example: + + reset-controller@1806001c { + compatible = "qca,ar9132-reset", "qca,ar7100-reset"; + reg = <0x1806001c 0x4>; + + #reset-cells = <1>; + }; diff --git a/kernel/Documentation/devicetree/bindings/reset/berlin,reset.txt b/kernel/Documentation/devicetree/bindings/reset/berlin,reset.txt new file mode 100644 index 000000000..514fee098 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/reset/berlin,reset.txt @@ -0,0 +1,23 @@ +Marvell Berlin reset controller +=============================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +The reset controller node must be a sub-node of the chip controller +node on Berlin SoCs. + +Required properties: +- compatible: should be "marvell,berlin2-reset" +- #reset-cells: must be set to 2 + +Example: + +chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; +}; + +&usb_phy0 { + resets = <&chip_rst 0x104 12>; +}; diff --git a/kernel/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt b/kernel/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt new file mode 100644 index 000000000..a98872d27 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt @@ -0,0 +1,19 @@ +Broadcom BCM63138 Processor Monitor Bus binding +=============================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Require properties: + +- compatible: must be "brcm,bcm63138-pmb" +- reg: base register address and size for this bus controller +- #reset-cells: must be 2 first cell is the address within the bus instance designated + by the phandle, and the second is the number of zones for this peripheral + +Example: + pmb0: reset-controller@4800c0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800c0 0x10>; + #reset-cells = <2>; + }; diff --git a/kernel/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/kernel/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt new file mode 100644 index 000000000..b4e96a278 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt @@ -0,0 +1,84 @@ +NXP LPC1850 Reset Generation Unit (RGU) +======================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "nxp,lpc1850-rgu" +- reg: register base and length +- clocks: phandle and clock specifier to RGU clocks +- clock-names: should contain "delay" and "reg" +- #reset-cells: should be 1 + +See table below for valid peripheral reset numbers. Numbers not +in the table below are either reserved or not applicable for +normal operation. + +Reset Peripheral + 9 System control unit (SCU) + 12 ARM Cortex-M0 subsystem core (LPC43xx only) + 13 CPU core + 16 LCD controller + 17 USB0 + 18 USB1 + 19 DMA + 20 SDIO + 21 External memory controller (EMC) + 22 Ethernet + 25 Flash bank A + 27 EEPROM + 28 GPIO + 29 Flash bank B + 32 Timer0 + 33 Timer1 + 34 Timer2 + 35 Timer3 + 36 Repetitive Interrupt timer (RIT) + 37 State Configurable Timer (SCT) + 38 Motor control PWM (MCPWM) + 39 QEI + 40 ADC0 + 41 ADC1 + 42 DAC + 44 USART0 + 45 UART1 + 46 USART2 + 47 USART3 + 48 I2C0 + 49 I2C1 + 50 SSP0 + 51 SSP1 + 52 I2S0 and I2S1 + 53 Serial Flash Interface (SPIFI) + 54 C_CAN1 + 55 C_CAN0 + 56 ARM Cortex-M0 application core (LPC4370 only) + 57 SGPIO (LPC43xx only) + 58 SPI (LPC43xx only) + 60 ADCHS (12-bit ADC) (LPC4370 only) + +Refer to NXP LPC18xx or LPC43xx user manual for more details about +the reset signals and the connected block/peripheral. + +Reset provider example: +rgu: reset-controller@40053000 { + compatible = "nxp,lpc1850-rgu"; + reg = <0x40053000 0x1000>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; + clock-names = "delay", "reg"; + #reset-cells = <1>; +}; + +Reset consumer example: +mac: ethernet@40010000 { + compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac"; + reg = <0x40010000 0x2000>; + interrupts = <5>; + interrupt-names = "macirq"; + clocks = <&ccu1 CLK_CPU_ETHERNET>; + clock-names = "stmmaceth"; + resets = <&rgu 22>; + reset-names = "stmmaceth"; + status = "disabled"; +}; diff --git a/kernel/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/kernel/Documentation/devicetree/bindings/reset/socfpga-reset.txt index 32c1c8bfd..98c9f560e 100644 --- a/kernel/Documentation/devicetree/bindings/reset/socfpga-reset.txt +++ b/kernel/Documentation/devicetree/bindings/reset/socfpga-reset.txt @@ -3,6 +3,7 @@ Altera SOCFPGA Reset Manager Required properties: - compatible : "altr,rst-mgr" - reg : Should contain 1 register ranges(address and length) +- altr,modrst-offset : Should contain the offset of the first modrst register. - #reset-cells: 1 Example: @@ -10,4 +11,5 @@ Example: #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; }; diff --git a/kernel/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/kernel/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt index 54ae9f747..9ca27761f 100644 --- a/kernel/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt +++ b/kernel/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt @@ -39,4 +39,4 @@ Example: }; Macro definitions for the supported reset channels can be found in: -include/dt-bindings/reset-controller/stih407-resets.h +include/dt-bindings/reset/stih407-resets.h diff --git a/kernel/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/kernel/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt index 5ab26b7e9..1cfd21d1d 100644 --- a/kernel/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt +++ b/kernel/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt @@ -43,5 +43,5 @@ example: Macro definitions for the supported reset channels can be found in: -include/dt-bindings/reset-controller/stih415-resets.h -include/dt-bindings/reset-controller/stih416-resets.h +include/dt-bindings/reset/stih415-resets.h +include/dt-bindings/reset/stih416-resets.h diff --git a/kernel/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/kernel/Documentation/devicetree/bindings/reset/st,sti-softreset.txt index a8d3d3c25..891a2fd85 100644 --- a/kernel/Documentation/devicetree/bindings/reset/st,sti-softreset.txt +++ b/kernel/Documentation/devicetree/bindings/reset/st,sti-softreset.txt @@ -42,5 +42,5 @@ example: Macro definitions for the supported reset channels can be found in: -include/dt-bindings/reset-controller/stih415-resets.h -include/dt-bindings/reset-controller/stih416-resets.h +include/dt-bindings/reset/stih415-resets.h +include/dt-bindings/reset/stih416-resets.h diff --git a/kernel/Documentation/devicetree/bindings/reset/zynq-reset.txt b/kernel/Documentation/devicetree/bindings/reset/zynq-reset.txt new file mode 100644 index 000000000..5860120e3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/reset/zynq-reset.txt @@ -0,0 +1,68 @@ +Xilinx Zynq Reset Manager + +The Zynq AP-SoC has several different resets. + +See Chapter 26 of the Zynq TRM (UG585) for more information about Zynq resets. + +Required properties: +- compatible: "xlnx,zynq-reset" +- reg: SLCR offset and size taken via syscon <0x200 0x48> +- syscon: <&slcr> + This should be a phandle to the Zynq's SLCR registers. +- #reset-cells: Must be 1 + +The Zynq Reset Manager needs to be a childnode of the SLCR. + +Example: + rstc: rstc@200 { + compatible = "xlnx,zynq-reset"; + reg = <0x200 0x48>; + #reset-cells = <1>; + syscon = <&slcr>; + }; + +Reset outputs: + 0 : soft reset + 32 : ddr reset + 64 : topsw reset + 96 : dmac reset + 128: usb0 reset + 129: usb1 reset + 160: gem0 reset + 161: gem1 reset + 164: gem0 rx reset + 165: gem1 rx reset + 166: gem0 ref reset + 167: gem1 ref reset + 192: sdio0 reset + 193: sdio1 reset + 196: sdio0 ref reset + 197: sdio1 ref reset + 224: spi0 reset + 225: spi1 reset + 226: spi0 ref reset + 227: spi1 ref reset + 256: can0 reset + 257: can1 reset + 258: can0 ref reset + 259: can1 ref reset + 288: i2c0 reset + 289: i2c1 reset + 320: uart0 reset + 321: uart1 reset + 322: uart0 ref reset + 323: uart1 ref reset + 352: gpio reset + 384: lqspi reset + 385: qspi ref reset + 416: smc reset + 417: smc ref reset + 448: ocm reset + 512: fpga0 out reset + 513: fpga1 out reset + 514: fpga2 out reset + 515: fpga3 out reset + 544: a9 reset 0 + 545: a9 reset 1 + 552: peri reset + diff --git a/kernel/Documentation/devicetree/bindings/hwrng/atmel-trng.txt b/kernel/Documentation/devicetree/bindings/rng/atmel-trng.txt index 4ac5aaa2d..4ac5aaa2d 100644 --- a/kernel/Documentation/devicetree/bindings/hwrng/atmel-trng.txt +++ b/kernel/Documentation/devicetree/bindings/rng/atmel-trng.txt diff --git a/kernel/Documentation/devicetree/bindings/hwrng/brcm,iproc-rng200.txt b/kernel/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt index e25a45666..e25a45666 100644 --- a/kernel/Documentation/devicetree/bindings/hwrng/brcm,iproc-rng200.txt +++ b/kernel/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt diff --git a/kernel/Documentation/devicetree/bindings/hwrng/omap_rng.txt b/kernel/Documentation/devicetree/bindings/rng/omap_rng.txt index 6a62acd86..6a62acd86 100644 --- a/kernel/Documentation/devicetree/bindings/hwrng/omap_rng.txt +++ b/kernel/Documentation/devicetree/bindings/rng/omap_rng.txt diff --git a/kernel/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt b/kernel/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt new file mode 100644 index 000000000..4ca8dd4d7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt @@ -0,0 +1,17 @@ +Exynos Pseudo Random Number Generator + +Required properties: + +- compatible : Should be "samsung,exynos4-rng". +- reg : Specifies base physical address and size of the registers map. +- clocks : Phandle to clock-controller plus clock-specifier pair. +- clock-names : "secss" as a clock name. + +Example: + + rng@10830400 { + compatible = "samsung,exynos4-rng"; + reg = <0x10830400 0x200>; + clocks = <&clock CLK_SSS>; + clock-names = "secss"; + }; diff --git a/kernel/Documentation/devicetree/bindings/rng/st,rng.txt b/kernel/Documentation/devicetree/bindings/rng/st,rng.txt new file mode 100644 index 000000000..35734bc28 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/rng/st,rng.txt @@ -0,0 +1,15 @@ +STMicroelectronics HW Random Number Generator +---------------------------------------------- + +Required parameters: +compatible : Should be "st,rng" +reg : Base address and size of IP's register map. +clocks : Phandle to device's clock (See: ../clocks/clock-bindings.txt) + +Example: + +rng@fee80000 { + compatible = "st,rng"; + reg = <0xfee80000 0x1000>; + clocks = <&clk_sysin>; +} diff --git a/kernel/Documentation/devicetree/bindings/rng/st,stm32-rng.txt b/kernel/Documentation/devicetree/bindings/rng/st,stm32-rng.txt new file mode 100644 index 000000000..47f04176f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/rng/st,stm32-rng.txt @@ -0,0 +1,21 @@ +STMicroelectronics STM32 HW RNG +=============================== + +The STM32 hardware random number generator is a simple fixed purpose IP and +is fully separated from other crypto functions. + +Required properties: + +- compatible : Should be "st,stm32-rng" +- reg : Should be register base and length as documented in the datasheet +- interrupts : The designated IRQ line for the RNG +- clocks : The clock needed to enable the RNG + +Example: + + rng: rng@50060800 { + compatible = "st,stm32-rng"; + reg = <0x50060800 0x400>; + interrupts = <80>; + clocks = <&rcc 0 38>; + }; diff --git a/kernel/Documentation/devicetree/bindings/hwrng/timeriomem_rng.txt b/kernel/Documentation/devicetree/bindings/rng/timeriomem_rng.txt index 6616d1586..6616d1586 100644 --- a/kernel/Documentation/devicetree/bindings/hwrng/timeriomem_rng.txt +++ b/kernel/Documentation/devicetree/bindings/rng/timeriomem_rng.txt diff --git a/kernel/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt b/kernel/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt index 34c150577..5d3791e78 100644 --- a/kernel/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt +++ b/kernel/Documentation/devicetree/bindings/rtc/atmel,at91rm9200-rtc.txt @@ -5,6 +5,7 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: rtc alarm/event interrupt +- clocks: phandle to input clock. Example: @@ -12,4 +13,5 @@ rtc@fffffe00 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffe00 0x100>; interrupts = <1 4 7>; + clocks = <&clk32k>; }; diff --git a/kernel/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt b/kernel/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt new file mode 100644 index 000000000..8e76f2648 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/rtc/dallas,ds1390.txt @@ -0,0 +1,18 @@ +* Dallas DS1390 SPI Serial Real-Time Clock + +Required properties: +- compatible: Should contain "dallas,ds1390". +- reg: SPI address for chip + +Optional properties: +- trickle-resistor-ohms : Selected resistor for trickle charger + Values usable for ds1390 are 250, 2000, 4000 + Should be given if trickle charger should be enabled +- trickle-diode-disable : Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled +Example: + ds1390: rtc@68 { + compatible = "dallas,ds1390"; + trickle-resistor-ohms = <250>; + reg = <0>; + }; diff --git a/kernel/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt b/kernel/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt index 5c199ee04..a8934fe2a 100644 --- a/kernel/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt +++ b/kernel/Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt @@ -6,11 +6,11 @@ as well as a clock output of up to 32kHz. Required properties: - compatible: should be: "haoyu,hym8563" - reg: i2c address -- interrupts: rtc alarm/event interrupt - #clock-cells: the value should be 0 Optional properties: - clock-output-names: From common clock binding +- interrupts: rtc alarm/event interrupt Example: diff --git a/kernel/Documentation/devicetree/bindings/rtc/isil,isl12057.txt b/kernel/Documentation/devicetree/bindings/rtc/isil,isl12057.txt index 501c39cea..cf83e0940 100644 --- a/kernel/Documentation/devicetree/bindings/rtc/isil,isl12057.txt +++ b/kernel/Documentation/devicetree/bindings/rtc/isil,isl12057.txt @@ -5,7 +5,7 @@ consisting of a compatible field, an address and possibly an interrupt line). Nonetheless, it also supports an option boolean property -("isil,irq2-can-wakeup-machine") to handle the specific use-case found +("wakeup-source") to handle the specific use-case found on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104 and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip (associated with the alarm supported by the driver) is not connected @@ -22,9 +22,9 @@ Required properties supported by the device: Optional properties: - - "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source, - independently of the availability of an IRQ line connected to the - SoC. + - "wakeup-source": mark the chip as a wakeup source, independently of + the availability of an IRQ line connected to the SoC. + (Legacy property supported: "isil,irq2-can-wakeup-machine") - "interrupt-parent", "interrupts": for passing the interrupt line of the SoC connected to IRQ#2 of the RTC chip. @@ -74,5 +74,5 @@ PMIC, allowing the device to be started based on configured alarm: isl12057: isl12057@68 { compatible = "isil,isl12057"; reg = <0x68>; - isil,irq2-can-wakeup-machine; + wakeup-source; }; diff --git a/kernel/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt b/kernel/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt new file mode 100644 index 000000000..3c97bd180 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/rtc/nxp,lpc1788-rtc.txt @@ -0,0 +1,21 @@ +NXP LPC1788 real-time clock + +The LPC1788 RTC provides calendar and clock functionality +together with periodic tick and alarm interrupt support. + +Required properties: +- compatible : must contain "nxp,lpc1788-rtc" +- reg : Specifies base physical address and size of the registers. +- interrupts : A single interrupt specifier. +- clocks : Must contain clock specifiers for rtc and register clock +- clock-names : Must contain "rtc" and "reg" + See ../clocks/clock-bindings.txt for details. + +Example: +rtc: rtc@40046000 { + compatible = "nxp,lpc1788-rtc"; + reg = <0x40046000 0x1000>; + interrupts = <47>; + clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>; + clock-names = "rtc", "reg"; +}; diff --git a/kernel/Documentation/devicetree/bindings/rtc/pcf8563.txt b/kernel/Documentation/devicetree/bindings/rtc/pcf8563.txt new file mode 100644 index 000000000..72f6d2c96 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/rtc/pcf8563.txt @@ -0,0 +1,25 @@ +* Philips PCF8563/Epson RTC8564 Real Time Clock + +Philips PCF8563/Epson RTC8564 Real Time Clock + +Required properties: +see: Documentation/devicetree/bindings/i2c/trivial-devices.txt + +Optional property: +- #clock-cells: Should be 0. +- clock-output-names: + overwrite the default clock name "pcf8563-clkout" + +Example: + +pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; +}; + +device { +... + clocks = <&pcf8563>; +... +}; diff --git a/kernel/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/kernel/Documentation/devicetree/bindings/rtc/rtc-mxc.txt new file mode 100644 index 000000000..5bcd31d99 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/rtc/rtc-mxc.txt @@ -0,0 +1,26 @@ +* Real Time Clock of the i.MX SoCs + +RTC controller for the i.MX SoCs + +Required properties: +- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc". +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: IRQ line for the RTC. +- clocks: should contain two entries: + * one for the input reference + * one for the the SoC RTC +- clock-names: should contain: + * "ref" for the input reference clock + * "ipg" for the SoC RTC clock + +Example: + +rtc@10007000 { + compatible = "fsl,imx21-rtc"; + reg = <0x10007000 0x1000>; + interrupts = <22>; + clocks = <&clks IMX27_CLK_CKIL>, + <&clks IMX27_CLK_RTC_IPG_GATE>; + clock-names = "ref", "ipg"; +}; diff --git a/kernel/Documentation/devicetree/bindings/rtc/rtc-omap.txt b/kernel/Documentation/devicetree/bindings/rtc/rtc-omap.txt index 4ba4dbd34..bf7d11ae9 100644 --- a/kernel/Documentation/devicetree/bindings/rtc/rtc-omap.txt +++ b/kernel/Documentation/devicetree/bindings/rtc/rtc-omap.txt @@ -8,6 +8,7 @@ Required properties: Wakeup generation for event Alarm. It can also be used to control an external PMIC via the pmic_power_en pin. + - "ti,am4372-rtc" - for RTC IP used similar to that on AM437X SoC family. - reg: Address range of rtc register set - interrupts: rtc timer, alarm interrupts in order - interrupt-parent: phandle for the interrupt controller @@ -15,6 +16,8 @@ Required properties: Optional properties: - system-power-controller: whether the rtc is controlling the system power through pmic_power_en +- clocks: Any internal or external clocks feeding in to rtc +- clock-names: Corresponding names of the clocks Example: @@ -25,4 +28,6 @@ rtc@1c23000 { 19>; interrupt-parent = <&intc>; system-power-controller; + clocks = <&clk_32k_rtc>, <&clk_32768_ck>; + clock-names = "ext-clk", "int-clk"; }; diff --git a/kernel/Documentation/devicetree/bindings/rtc/rtc-opal.txt b/kernel/Documentation/devicetree/bindings/rtc/rtc-opal.txt index af87e5eca..a1734e5cb 100644 --- a/kernel/Documentation/devicetree/bindings/rtc/rtc-opal.txt +++ b/kernel/Documentation/devicetree/bindings/rtc/rtc-opal.txt @@ -5,12 +5,13 @@ Required properties: - comapatible: Should be "ibm,opal-rtc" Optional properties: -- has-tpo: Decides if the wakeup is supported or not. +- wakeup-source: Decides if the wakeup is supported or not + (Legacy property supported: "has-tpo") Example: rtc { compatible = "ibm,opal-rtc"; - has-tpo; + wakeup-source; phandle = <0x10000029>; linux,phandle = <0x10000029>; }; diff --git a/kernel/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt b/kernel/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt new file mode 100644 index 000000000..daf88265d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt @@ -0,0 +1,28 @@ +STMicroelectronics Low Power Controller (LPC) - RTC +=================================================== + +LPC currently supports Watchdog OR Real Time Clock OR Clocksource +functionality. + +[See: ../watchdog/st_lpc_wdt.txt for Watchdog options] +[See: ../timer/st,stih407-lpc for Clocksource options] + +Required properties + +- compatible : Must be: "st,stih407-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of three modes: + ST_LPC_MODE_RTC [0] + ST_LPC_MODE_WDT [1] + ST_LPC_MODE_CLKSRC [2] + One (and only one) mode must be selected. + +Example: + lpc@fde05000 { + compatible = "st,stih407-lpc"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,lpc-mode = <ST_LPC_MODE_RTC>; + }; diff --git a/kernel/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/kernel/Documentation/devicetree/bindings/rtc/s3c-rtc.txt index ab757b84d..ac2fcd6ff 100644 --- a/kernel/Documentation/devicetree/bindings/rtc/s3c-rtc.txt +++ b/kernel/Documentation/devicetree/bindings/rtc/s3c-rtc.txt @@ -6,7 +6,8 @@ Required properties: * "samsung,s3c2416-rtc" - for controllers compatible with s3c2416 rtc. * "samsung,s3c2443-rtc" - for controllers compatible with s3c2443 rtc. * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc. - * "samsung,exynos3250-rtc" - for controllers compatible with exynos3250 rtc. + * "samsung,exynos3250-rtc" - (deprecated) for controllers compatible with + exynos3250 rtc (use "samsung,s3c6410-rtc"). - reg: physical base address of the controller and length of memory mapped region. - interrupts: Two interrupt numbers to the cpu should be specified. First diff --git a/kernel/Documentation/devicetree/bindings/i2c/ti,bq32k.txt b/kernel/Documentation/devicetree/bindings/rtc/ti,bq32k.txt index e204906b9..e204906b9 100644 --- a/kernel/Documentation/devicetree/bindings/i2c/ti,bq32k.txt +++ b/kernel/Documentation/devicetree/bindings/rtc/ti,bq32k.txt diff --git a/kernel/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt b/kernel/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt new file mode 100644 index 000000000..0df6f016b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/rtc/xlnx-rtc.txt @@ -0,0 +1,25 @@ +* Xilinx Zynq Ultrascale+ MPSoC Real Time Clock + +RTC controller for the Xilinx Zynq MPSoC Real Time Clock +Separate IRQ lines for seconds and alarm + +Required properties: +- compatible: Should be "xlnx,zynqmp-rtc" +- reg: Physical base address of the controller and length + of memory mapped region. +- interrupts: IRQ lines for the RTC. +- interrupt-names: interrupt line names eg. "sec" "alarm" + +Optional: +- calibration: calibration value for 1 sec period which will + be programmed directly to calibration register + +Example: +rtc: rtc@ffa60000 { + compatible = "xlnx,zynqmp-rtc"; + reg = <0x0 0xffa60000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 26 4>, <0 27 4>; + interrupt-names = "alarm", "sec"; + calibration = <0x198233>; +}; diff --git a/kernel/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt b/kernel/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt new file mode 100644 index 000000000..4163e7eb7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt @@ -0,0 +1,10 @@ +* ARM SBSA defined generic UART +This UART uses a subset of the PL011 registers and consequently lives +in the PL011 driver. It's baudrate and other communication parameters +cannot be adjusted at runtime, so it lacks a clock specifier here. + +Required properties: +- compatible: must be "arm,sbsa-uart" +- reg: exactly one register range +- interrupts: exactly one interrupt specifier +- current-speed: the (fixed) baud rate set by the firmware diff --git a/kernel/Documentation/devicetree/bindings/serial/atmel-usart.txt b/kernel/Documentation/devicetree/bindings/serial/atmel-usart.txt index 90787aa2e..e6e6142e3 100644 --- a/kernel/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/kernel/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -22,6 +22,8 @@ Optional properties: memory peripheral interface and USART DMA channel ID, FIFO configuration. Refer to dma.txt and atmel-dma.txt for details. - dma-names: "rx" for RX channel, "tx" for TX channel. +- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO + capable USARTs. <chip> compatible description: - at91rm9200: legacy USART support @@ -57,4 +59,5 @@ Example: dmas = <&dma0 2 0x3>, <&dma0 2 0x204>; dma-names = "tx", "rx"; + atmel,fifo-size = <32>; }; diff --git a/kernel/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/kernel/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt index ebcbb62c0..51b3c9e80 100644 --- a/kernel/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt +++ b/kernel/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt @@ -6,7 +6,7 @@ Required properties: - interrupts: device interrupt Optional properties: -- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD +- {dtr,dsr,rng,dcd}-gpios: specify a GPIO for DTR/DSR/RI/DCD line respectively. Example: @@ -16,4 +16,8 @@ serial@b00260000 { reg = <0xb0026000 0x1000>; interrupts = <68>; status = "disabled"; + dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>; + dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>; + rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>; + dcd-gpios = <&sysgpio 3 GPIO_ACTIVE_LOW>; }; diff --git a/kernel/Documentation/devicetree/bindings/serial/ingenic,uart.txt b/kernel/Documentation/devicetree/bindings/serial/ingenic,uart.txt new file mode 100644 index 000000000..02cb7fe59 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/serial/ingenic,uart.txt @@ -0,0 +1,23 @@ +* Ingenic SoC UART + +Required properties: +- compatible : "ingenic,jz4740-uart", "ingenic,jz4760-uart", + "ingenic,jz4775-uart" or "ingenic,jz4780-uart" +- reg : offset and length of the register set for the device. +- interrupts : should contain uart interrupt. +- clocks : phandles to the module & baud clocks. +- clock-names: tuple listing input clock names. + Required elements: "baud", "module" + +Example: + +uart0: serial@10030000 { + compatible = "ingenic,jz4740-uart"; + reg = <0x10030000 0x100>; + + interrupt-parent = <&intc>; + interrupts = <9>; + + clocks = <&ext>, <&cgu JZ4740_CLK_UART0>; + clock-names = "baud", "module"; +}; diff --git a/kernel/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/kernel/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt index 669b8140d..d10cc06c0 100644 --- a/kernel/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt +++ b/kernel/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt @@ -10,7 +10,6 @@ Required properties: mvrl,pxa168-ssp mrvl,pxa910-ssp mrvl,ce4100-ssp - mrvl,lpss-ssp - reg: The memory base - dmas: Two dma phandles, one for rx, one for tx diff --git a/kernel/Documentation/devicetree/bindings/serial/mtk-uart.txt b/kernel/Documentation/devicetree/bindings/serial/mtk-uart.txt index 44152261e..2d47add34 100644 --- a/kernel/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/kernel/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -5,16 +5,25 @@ Required properties: * "mediatek,mt8135-uart" for MT8135 compatible UARTS * "mediatek,mt8127-uart" for MT8127 compatible UARTS * "mediatek,mt8173-uart" for MT8173 compatible UARTS + * "mediatek,mt6795-uart" for MT6795 compatible UARTS * "mediatek,mt6589-uart" for MT6589 compatible UARTS * "mediatek,mt6582-uart" for MT6582 compatible UARTS - * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582, - MT6577) + * "mediatek,mt6580-uart" for MT6580 compatible UARTS + * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6795, + MT6589, MT6582, MT6580, MT6577) - reg: The base address of the UART register bank. - interrupts: A single interrupt specifier. -- clocks: Clock driving the hardware. +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: + - "baud": The clock the baudrate is derived from + - "bus": The bus clock for register accesses (optional) + +For compatibility with older device trees an unnamed clock is used for the +baud clock if the baudclk does not exist. Do not use this for new designs. Example: @@ -22,5 +31,6 @@ Example: compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart"; reg = <0x11006000 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&uart_clk>, <&bus_clk>; + clock-names = "baud", "bus"; }; diff --git a/kernel/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/kernel/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt new file mode 100644 index 000000000..04e23e63e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt @@ -0,0 +1,28 @@ +* NXP LPC1850 UART + +Required properties: +- compatible : "nxp,lpc1850-uart", "ns16550a". +- reg : offset and length of the register set for the device. +- interrupts : should contain uart interrupt. +- clocks : phandle to the input clocks. +- clock-names : required elements: "uartclk", "reg". + +Optional properties: +- dmas : Two or more DMA channel specifiers following the + convention outlined in bindings/dma/dma.txt +- dma-names : Names for the dma channels, if present. There must + be at least one channel named "tx" for transmit + and named "rx" for receive. + +Since it's also possible to also use the of_serial.c driver all +parameters from 8250.txt also apply but are optional. + +Example: +uart0: serial@40081000 { + compatible = "nxp,lpc1850-uart", "ns16550a"; + reg = <0x40081000 0x1000>; + reg-shift = <2>; + interrupts = <24>; + clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; + clock-names = "uartclk", "reg"; +}; diff --git a/kernel/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/kernel/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt index 246c79566..fbfe53635 100644 --- a/kernel/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt +++ b/kernel/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt @@ -1,4 +1,5 @@ * NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART) +* i2c as bus Required properties: - compatible: Should be one of the following: @@ -31,3 +32,39 @@ Example: gpio-controller; #gpio-cells = <2>; }; + +* spi as bus + +Required properties: +- compatible: Should be one of the following: + - "nxp,sc16is740" for NXP SC16IS740, + - "nxp,sc16is741" for NXP SC16IS741, + - "nxp,sc16is750" for NXP SC16IS750, + - "nxp,sc16is752" for NXP SC16IS752, + - "nxp,sc16is760" for NXP SC16IS760, + - "nxp,sc16is762" for NXP SC16IS762. +- reg: SPI chip select number. +- interrupt-parent: The phandle for the interrupt controller that + services interrupts for this IC. +- interrupts: Specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. +- clocks: phandle to the IC source clock. + +Optional properties: +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be two. The first cell is the GPIO number and + the second cell is used to specify the GPIO polarity: + 0 = active high, + 1 = active low. + +Example: + sc16is750: sc16is750@0 { + compatible = "nxp,sc16is750"; + reg = <0>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/kernel/Documentation/devicetree/bindings/serial/omap_serial.txt b/kernel/Documentation/devicetree/bindings/serial/omap_serial.txt index 54c2a155c..7a71b5de7 100644 --- a/kernel/Documentation/devicetree/bindings/serial/omap_serial.txt +++ b/kernel/Documentation/devicetree/bindings/serial/omap_serial.txt @@ -4,6 +4,9 @@ Required properties: - compatible : should be "ti,omap2-uart" for OMAP2 controllers - compatible : should be "ti,omap3-uart" for OMAP3 controllers - compatible : should be "ti,omap4-uart" for OMAP4 controllers +- compatible : should be "ti,am4372-uart" for AM437x controllers +- compatible : should be "ti,am3352-uart" for AM335x controllers +- compatible : should be "ti,dra742-uart" for DRA7x controllers - reg : address and length of the register space - interrupts or interrupts-extended : Should contain the uart interrupt specifier or both the interrupt diff --git a/kernel/Documentation/devicetree/bindings/serial/pl011.txt b/kernel/Documentation/devicetree/bindings/serial/pl011.txt index ba3ecb8cb..77863aefe 100644 --- a/kernel/Documentation/devicetree/bindings/serial/pl011.txt +++ b/kernel/Documentation/devicetree/bindings/serial/pl011.txt @@ -1,7 +1,7 @@ * ARM AMBA Primecell PL011 serial UART Required properties: -- compatible: must be "arm,primecell", "arm,pl011" +- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart" - reg: exactly one register range with length 0x1000 - interrupts: exactly one interrupt specifier @@ -19,7 +19,7 @@ Optional properties: must correspond to the PCLK clocking the internal logic of the block. Just listing one clock (the first one) is deprecated. -- clocks-names: +- clock-names: When present, the first clock listed must be named "uartclk" and the second clock listed must be named "apb_pclk" diff --git a/kernel/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt b/kernel/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt index a2114c217..182777fac 100644 --- a/kernel/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt +++ b/kernel/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt @@ -26,6 +26,12 @@ Required properties: Optional properties: - dmas: Should contain dma specifiers for transmit and receive channels - dma-names: Should contain "tx" for transmit and "rx" for receive channels +- qcom,tx-crci: Identificator <u32> for Client Rate Control Interface to be + used with TX DMA channel. Required when using DMA for transmission + with UARTDM v1.3 and bellow. +- qcom,rx-crci: Identificator <u32> for Client Rate Control Interface to be + used with RX DMA channel. Required when using DMA for reception + with UARTDM v1.3 and bellow. Note: Aliases may be defined to ensure the correct ordering of the UARTs. The alias serialN will result in the UART being assigned port N. If any diff --git a/kernel/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/kernel/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index ae73bb0e9..73f825e5e 100644 --- a/kernel/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/kernel/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -23,12 +23,15 @@ Required properties: - "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART. - "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART. - "renesas,hscif-r8a7794" for R8A7794 (R-Car E2) HSCIF compatible UART. + - "renesas,scif-r8a7795" for R8A7795 (R-Car H3) SCIF compatible UART. + - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. - "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART. - "renesas,scif" for generic SCIF compatible UART. - "renesas,scifa" for generic SCIFA compatible UART. - "renesas,scifb" for generic SCIFB compatible UART. - "renesas,hscif" for generic HSCIF compatible UART. + - "renesas,sci" for generic SCI compatible UART. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first followed by the @@ -44,6 +47,11 @@ Required properties: Note: Each enabled SCIx UART should have an alias correctly numbered in the "aliases" node. +Optional properties: + - dmas: Must contain a list of two references to DMA specifiers, one for + transmission, and one for reception. + - dma-names: Must contain a list of two DMA names, "tx" and "rx". + Example: aliases { serial0 = &scifa0; @@ -56,4 +64,6 @@ Example: interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; }; diff --git a/kernel/Documentation/devicetree/bindings/serial/sirf-uart.txt b/kernel/Documentation/devicetree/bindings/serial/sirf-uart.txt index f0c39261c..67e2a0aeb 100644 --- a/kernel/Documentation/devicetree/bindings/serial/sirf-uart.txt +++ b/kernel/Documentation/devicetree/bindings/serial/sirf-uart.txt @@ -2,8 +2,7 @@ Required properties: - compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart", - "sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means - uart located in BT module and used for BT. + "sirf,atlas7-uart" or "sirf,atlas7-usp-uart". - reg : Offset and length of the register set for the device - interrupts : Should contain uart interrupt - fifosize : Should define hardware rx/tx fifo size @@ -33,15 +32,3 @@ usp@b0090000 { rts-gpios = <&gpio 15 0>; cts-gpios = <&gpio 46 0>; }; - -for uart use in BT module, -uart6: uart@11000000 { - cell-index = <6>; - compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart"; - reg = <0x11000000 0x1000>; - interrupts = <0 100 0>; - clocks = <&clks 138>, <&clks 140>, <&clks 141>; - clock-names = "uart", "general", "noc"; - fifosize = <128>; - status = "disabled"; -} diff --git a/kernel/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/kernel/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt index 289c40ed7..12bbe9f22 100644 --- a/kernel/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt +++ b/kernel/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt @@ -15,6 +15,9 @@ The supplying peripheral clock can also be handled, needing a second property Required elements: "baudclk", "apb_pclk" Optional properties: +- snps,uart-16550-compatible : reflects the value of UART_16550_COMPATIBLE + configuration parameter. Define this if your UART does not implement the busy + functionality. - resets : phandle to the parent reset controller. - reg-shift : quantity to shift the register offsets by. If this property is not present then the register offsets are not shifted. diff --git a/kernel/Documentation/devicetree/bindings/serial/uniphier-uart.txt b/kernel/Documentation/devicetree/bindings/serial/uniphier-uart.txt new file mode 100644 index 000000000..0b3892a7a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/serial/uniphier-uart.txt @@ -0,0 +1,23 @@ +UniPhier UART controller + +Required properties: +- compatible: should be "socionext,uniphier-uart". +- reg: offset and length of the register set for the device. +- interrupts: a single interrupt specifier. +- clocks: phandle to the input clock. + +Optional properties: +- fifo-size: the RX/TX FIFO size. Defaults to 64 if not specified. + +Example: + aliases { + serial0 = &serial0; + }; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; diff --git a/kernel/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/kernel/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt index 48c4dae5d..47e46ccbc 100644 --- a/kernel/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt +++ b/kernel/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt @@ -47,7 +47,7 @@ PROPERTIES For additional details about the PAMU/LIODN binding(s) see pamu.txt -- fsl,qman-channel-id +- cell-index Usage: Required Value type: <u32> Definition: The hardware index of the channel. This can also be @@ -136,7 +136,7 @@ The example below shows a (P4080) QMan portals container/bus node with two porta reg = <0x4000 0x4000>, <0x101000 0x1000>; interrupts = <106 2 0 0>; fsl,liodn = <3 4>; - fsl,qman-channel-id = <1>; + cell-index = <1>; fman0 { fsl,liodn = <0x22>; diff --git a/kernel/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/kernel/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt new file mode 100644 index 000000000..a6c8afc83 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt @@ -0,0 +1,43 @@ +MediaTek SCPSYS +=============== + +The System Control Processor System (SCPSYS) has several power management +related tasks in the system. The tasks include thermal measurement, dynamic +voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control. +The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power +domain control. + +The driver implements the Generic PM domain bindings described in +power/power_domain.txt. It provides the power domains defined in +include/dt-bindings/power/mt8173-power.h. + +Required properties: +- compatible: Must be "mediatek,mt8173-scpsys" +- #power-domain-cells: Must be 1 +- reg: Address range of the SCPSYS unit +- infracfg: must contain a phandle to the infracfg controller +- clock, clock-names: clocks according to the common clock binding. + The clocks needed "mm", "mfg", "venc" and "venc_lt". + These are the clocks which hardware needs to be enabled + before enabling certain power domains. + +Example: + + scpsys: scpsys@10006000 { + #power-domain-cells = <1>; + compatible = "mediatek,mt8173-scpsys"; + reg = <0 0x10006000 0 0x1000>; + infracfg = <&infracfg>; + clocks = <&clk26m>, + <&topckgen CLK_TOP_MM_SEL>; + <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "mfg", "mm", "venc", "venc_lt"; + }; + +Example consumer: + + afe: mt8173-afe-pcm@11220000 { + compatible = "mediatek,mt8173-afe-pcm"; + power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>; + }; diff --git a/kernel/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt b/kernel/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt new file mode 100644 index 000000000..e27f5c4c5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/soc/qcom,smd-rpm.txt @@ -0,0 +1,117 @@ +Qualcomm Resource Power Manager (RPM) over SMD + +This driver is used to interface with the Resource Power Manager (RPM) found in +various Qualcomm platforms. The RPM allows each component in the system to vote +for state of the system resources, such as clocks, regulators and bus +frequencies. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,rpm-msm8974" + +- qcom,smd-channels: + Usage: required + Value type: <stringlist> + Definition: Shared Memory channel used for communication with the RPM + += SUBDEVICES + +The RPM exposes resources to its subnodes. The below bindings specify the set +of valid subnodes that can operate on these resources. + +== Regulators + +Regulator nodes are identified by their compatible: + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,rpm-pm8841-regulators" + "qcom,rpm-pm8941-regulators" + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_s4-supply: +- vdd_s5-supply: +- vdd_s6-supply: +- vdd_s7-supply: +- vdd_s8-supply: + Usage: optional (pm8841 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_l1_l3-supply: +- vdd_l2_lvs1_2_3-supply: +- vdd_l4_l11-supply: +- vdd_l5_l7-supply: +- vdd_l6_l12_l14_l15-supply: +- vdd_l8_l16_l18_l19-supply: +- vdd_l9_l10_l17_l22-supply: +- vdd_l13_l20_l23_l24-supply: +- vdd_l21-supply: +- vin_5vs-supply: + Usage: optional (pm8941 only) + Value type: <phandle> + Definition: reference to regulator supplying the input pin, as + described in the data sheet + +The regulator node houses sub-nodes for each regulator within the device. Each +sub-node is identified using the node's name, with valid values listed for each +of the pmics below. + +pm8841: + s1, s2, s3, s4, s5, s6, s7, s8 + +pm8941: + s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, + l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, + lvs3, 5vs1, 5vs2 + +The content of each sub-node is defined by the standard binding for regulators - +see regulator.txt. + += EXAMPLE + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + vdd_l13_l20_l23_l24-supply = <&pm8941_boost>; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_boost: s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + }; + }; + }; + }; + diff --git a/kernel/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt b/kernel/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt new file mode 100644 index 000000000..97d9b3e1b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt @@ -0,0 +1,85 @@ +Qualcomm Shared Memory Driver (SMD) binding + +This binding describes the Qualcomm Shared Memory Driver, a fifo based +communication channel for sending data between the various subsystems in +Qualcomm platforms. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be "qcom,smd" + += EDGES + +Each subnode of the SMD node represents a remote subsystem or a remote +processor of some sort - or in SMD language an "edge". The name of the edges +are not important. +The edge is described by the following properties: + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the IRQ used by the remote processor to + signal this processor about communication related updates + +- qcom,ipc: + Usage: required + Value type: <prop-encoded-array> + Definition: three entries specifying the outgoing ipc bit used for + signaling the remote processor: + - phandle to a syscon node representing the apcs registers + - u32 representing offset to the register within the syscon + - u32 representing the ipc bit within the register + +- qcom,smd-edge: + Usage: required + Value type: <u32> + Definition: the identifier of the remote processor in the smd channel + allocation table + +- qcom,remote-pid: + Usage: optional + Value type: <u32> + Definition: the identifier for the remote processor as known by the rest + of the system. + += SMD DEVICES + +In turn, subnodes of the "edges" represent devices tied to SMD channels on that +"edge". The names of the devices are not important. The properties of these +nodes are defined by the individual bindings for the SMD devices - but must +contain the following property: + +- qcom,smd-channels: + Usage: required + Value type: <stringlist> + Definition: a list of channels tied to this device, used for matching + the device to channels + += EXAMPLE + +The following example represents a smd node, with one edge representing the +"rpm" subsystem. For the "rpm" subsystem we have a device tied to the +"rpm_request" channel. + + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + ... + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt b/kernel/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt new file mode 100644 index 000000000..9326cdf6e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/soc/qcom/qcom,smem.txt @@ -0,0 +1,57 @@ +Qualcomm Shared Memory Manager binding + +This binding describes the Qualcomm Shared Memory Manager, used to share data +between various subsystems and OSes in Qualcomm platforms. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be: + "qcom,smem" + +- memory-region: + Usage: required + Value type: <prop-encoded-array> + Definition: handle to memory reservation for main SMEM memory region. + +- qcom,rpm-msg-ram: + Usage: required + Value type: <prop-encoded-array> + Definition: handle to RPM message memory resource + +- hwlocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to a hwspinlock used to protect allocations from + the shared memory + += EXAMPLE +The following example shows the SMEM setup for MSM8974, with a main SMEM region +at 0xfa00000 and the RPM message ram at 0xfc428000: + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; + }; + + smem@fa00000 { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + + soc { + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/kernel/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt new file mode 100644 index 000000000..112756e11 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt @@ -0,0 +1,46 @@ +* Rockchip Power Domains + +Rockchip processors include support for multiple power domains which can be +powered up/down by software based on different application scenes to save power. + +Required properties for power domain controller: +- compatible: Should be one of the following. + "rockchip,rk3288-power-controller" - for RK3288 SoCs. +- #power-domain-cells: Number of cells in a power-domain specifier. + Should be 1 for multiple PM domains. +- #address-cells: Should be 1. +- #size-cells: Should be 0. + +Required properties for power domain sub nodes: +- reg: index of the power domain, should use macros in: + "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain. +- clocks (optional): phandles to clocks which need to be enabled while power domain + switches state. + +Example: + + power: power-controller { + compatible = "rockchip,rk3288-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_gpu { + reg = <RK3288_PD_GPU>; + clocks = <&cru ACLK_GPU>; + }; + }; + +Node of a device using power domains must have a power-domains property, +containing a phandle to the power device node and an index specifying which +power domain to use. +The index should use macros in: + "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain. + +Example of the node using power domain: + + node { + /* ... */ + power-domains = <&power RK3288_PD_GPU>; + /* ... */ + }; diff --git a/kernel/Documentation/devicetree/bindings/soc/sunxi/sram.txt b/kernel/Documentation/devicetree/bindings/soc/sunxi/sram.txt new file mode 100644 index 000000000..067698112 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/soc/sunxi/sram.txt @@ -0,0 +1,72 @@ +Allwinnner SoC SRAM controllers +----------------------------------------------------- + +The SRAM controller found on most Allwinner devices is represented by +a regular node for the SRAM controller itself, with sub-nodes +reprensenting the SRAM handled by the SRAM controller. + +Controller Node +--------------- + +Required properties: +- compatible : "allwinner,sun4i-a10-sram-controller" +- reg : sram controller register offset + length + +SRAM nodes +---------- + +Each SRAM is described using the mmio-sram bindings documented in +Documentation/devicetree/bindings/misc/sram.txt + +Each SRAM will have SRAM sections that are going to be handled by the +SRAM controller as subnodes. These sections are represented following +once again the representation described in the mmio-sram binding. + +The valid sections compatible are: + - allwinner,sun4i-a10-sram-a3-a4 + - allwinner,sun4i-a10-sram-d + +Devices using SRAM sections +--------------------------- + +Some devices need to request to the SRAM controller to map an SRAM for +their exclusive use. + +The relationship between such a device and an SRAM section is +expressed through the allwinner,sram property, that will take a +phandle and an argument. + +This valid values for this argument are: + - 0: CPU + - 1: Device + +Example +------- +sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + }; +}; + +emac: ethernet@01c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + ... + + allwinner,sram = <&emac_sram 1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/kernel/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt index d8e8cdb73..d1ce21a49 100644 --- a/kernel/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt +++ b/kernel/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt @@ -221,7 +221,6 @@ qmss: qmss@2a40000 { #size-cells = <1>; ranges; pdsp0@0x2a10000 { - firmware = "keystone/qmss_pdsp_acc48_k2_le_1_0_0_8.fw"; reg = <0x2a10000 0x1000>, <0x2a0f000 0x100>, <0x2a0c000 0x3c8>, diff --git a/kernel/Documentation/devicetree/bindings/sound/adi,adau1701.txt b/kernel/Documentation/devicetree/bindings/sound/adi,adau1701.txt index 547a49b56..0d1128ce2 100644 --- a/kernel/Documentation/devicetree/bindings/sound/adi,adau1701.txt +++ b/kernel/Documentation/devicetree/bindings/sound/adi,adau1701.txt @@ -20,6 +20,8 @@ Optional properties: pin configurations as described in the datasheet, table 53. Note that the value of this property has to be prefixed with '/bits/ 8'. + - avdd-supply: Power supply for AVDD, providing 3.3V + - dvdd-supply: Power supply for DVDD, providing 3.3V Examples: @@ -28,6 +30,8 @@ Examples: compatible = "adi,adau1701"; reg = <0x34>; reset-gpio = <&gpio 23 0>; + avdd-supply = <&vdd_3v3_reg>; + dvdd-supply = <&vdd_3v3_reg>; adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>; adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4 0x4 0x4 0x4 0x4 0x4 0x4>; diff --git a/kernel/Documentation/devicetree/bindings/sound/ak4554.c b/kernel/Documentation/devicetree/bindings/sound/ak4554.txt index 934fa0275..934fa0275 100644 --- a/kernel/Documentation/devicetree/bindings/sound/ak4554.c +++ b/kernel/Documentation/devicetree/bindings/sound/ak4554.txt diff --git a/kernel/Documentation/devicetree/bindings/sound/ak4613.txt b/kernel/Documentation/devicetree/bindings/sound/ak4613.txt new file mode 100644 index 000000000..15a919522 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/ak4613.txt @@ -0,0 +1,17 @@ +AK4613 I2C transmitter + +This device supports I2C mode only. + +Required properties: + +- compatible : "asahi-kasei,ak4613" +- reg : The chip select number on the I2C bus + +Example: + +&i2c { + ak4613: ak4613@0x10 { + compatible = "asahi-kasei,ak4613"; + reg = <0x10>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/ak4642.txt b/kernel/Documentation/devicetree/bindings/sound/ak4642.txt index 623d4e70a..340784db6 100644 --- a/kernel/Documentation/devicetree/bindings/sound/ak4642.txt +++ b/kernel/Documentation/devicetree/bindings/sound/ak4642.txt @@ -7,7 +7,14 @@ Required properties: - compatible : "asahi-kasei,ak4642" or "asahi-kasei,ak4643" or "asahi-kasei,ak4648" - reg : The chip select number on the I2C bus -Example: +Optional properties: + + - #clock-cells : common clock binding; shall be set to 0 + - clocks : common clock binding; MCKI clock + - clock-frequency : common clock binding; frequency of MCKO + - clock-output-names : common clock binding; MCKO clock name + +Example 1: &i2c { ak4648: ak4648@0x12 { @@ -15,3 +22,16 @@ Example: reg = <0x12>; }; }; + +Example 2: + +&i2c { + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + reg = <0x12>; + #clock-cells = <0>; + clocks = <&audio_clock>; + clock-frequency = <12288000>; + clock-output-names = "ak4643_mcko"; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/atmel-classd.txt b/kernel/Documentation/devicetree/bindings/sound/atmel-classd.txt new file mode 100644 index 000000000..0018451c4 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/atmel-classd.txt @@ -0,0 +1,52 @@ +* Atmel ClassD driver under ALSA SoC architecture + +Required properties: +- compatible + Should be "atmel,sama5d2-classd". +- reg + Should contain ClassD registers location and length. +- interrupts + Should contain the IRQ line for the ClassD. +- dmas + One DMA specifiers as described in atmel-dma.txt and dma.txt files. +- dma-names + Must be "tx". +- clock-names + Tuple listing input clock names. + Required elements: "pclk", "gclk" and "aclk". +- clocks + Please refer to clock-bindings.txt. + +Optional properties: +- pinctrl-names, pinctrl-0 + Please refer to pinctrl-bindings.txt. +- atmel,model + The user-visible name of this sound complex. + The default value is "CLASSD". +- atmel,pwm-type + PWM modulation type, "single" or "diff". + The default value is "single". +- atmel,non-overlap-time + Set non-overlapping time, the unit is nanosecond(ns). + There are four values, + <5>, <10>, <15>, <20>, the default value is <10>. + Non-overlapping will be disabled if not specified. + +Example: +classd: classd@fc048000 { + compatible = "atmel,sama5d2-classd"; + reg = <0xfc048000 0x100>; + interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(47))>; + dma-names = "tx"; + clocks = <&classd_clk>, <&classd_gclk>, <&audio_pll_pmc>; + clock-names = "pclk", "gclk", "aclk"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_classd_default>; + atmel,model = "classd @ SAMA5D2-Xplained"; + atmel,pwm-type = "diff"; + atmel,non-overlap-time = <10>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/bt-sco.txt b/kernel/Documentation/devicetree/bindings/sound/bt-sco.txt new file mode 100644 index 000000000..29b8e5d40 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/bt-sco.txt @@ -0,0 +1,13 @@ +Bluetooth-SCO audio CODEC + +This device support generic Bluetooth SCO link. + +Required properties: + + - compatible : "delta,dfbmcs320" + +Example: + +codec: bt_sco { + compatible = "delta,dfbmcs320"; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/cs4349.txt b/kernel/Documentation/devicetree/bindings/sound/cs4349.txt new file mode 100644 index 000000000..54c117b59 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/cs4349.txt @@ -0,0 +1,19 @@ +CS4349 audio CODEC + +Required properties: + + - compatible : "cirrus,cs4349" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. + +Example: + +codec: cs4349@48 { + compatible = "cirrus,cs4349"; + reg = <0x48>; + reset-gpios = <&gpio 54 0>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/da7213.txt b/kernel/Documentation/devicetree/bindings/sound/da7213.txt new file mode 100644 index 000000000..58902802d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/da7213.txt @@ -0,0 +1,41 @@ +Dialog Semiconductor DA7213 Audio Codec bindings + +====== + +Required properties: +- compatible : Should be "dlg,da7213" +- reg: Specifies the I2C slave address + +Optional properties: +- clocks : phandle and clock specifier for codec MCLK. +- clock-names : Clock name string for 'clocks' attribute, should be "mclk". + +- dlg,micbias1-lvl : Voltage (mV) for Mic Bias 1 + [<1600>, <2200>, <2500>, <3000>] +- dlg,micbias2-lvl : Voltage (mV) for Mic Bias 2 + [<1600>, <2200>, <2500>, <3000>] +- dlg,dmic-data-sel : DMIC channel select based on clock edge. + ["lrise_rfall", "lfall_rrise"] +- dlg,dmic-samplephase : When to sample audio from DMIC. + ["on_clkedge", "between_clkedge"] +- dlg,dmic-clkrate : DMIC clock frequency (Hz). + [<1500000>, <3000000>] + +====== + +Example: + + codec_i2c: da7213@1a { + compatible = "dlg,da7213"; + reg = <0x1a>; + + clocks = <&clks 201>; + clock-names = "mclk"; + + dlg,micbias1-lvl = <2500>; + dlg,micbias2-lvl = <2500>; + + dlg,dmic-data-sel = "lrise_rfall"; + dlg,dmic-samplephase = "between_clkedge"; + dlg,dmic-clkrate = <3000000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/da7219.txt b/kernel/Documentation/devicetree/bindings/sound/da7219.txt new file mode 100644 index 000000000..1b7030911 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/da7219.txt @@ -0,0 +1,106 @@ +Dialog Semiconductor DA7219 Audio Codec bindings + +DA7219 is an audio codec with advanced accessory detect features. + +====== + +Required properties: +- compatible : Should be "dlg,da7219" +- reg: Specifies the I2C slave address + +- interrupt-parent : Specifies the phandle of the interrupt controller to which + the IRQs from DA7219 are delivered to. +- interrupts : IRQ line info for DA7219. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for + further information relating to interrupt properties) + +- VDD-supply: VDD power supply for the device +- VDDMIC-supply: VDDMIC power supply for the device +- VDDIO-supply: VDDIO power supply for the device + (See Documentation/devicetree/bindings/regulator/regulator.txt for further + information relating to regulators) + +Optional properties: +- interrupt-names : Name associated with interrupt line. Should be "wakeup" if + interrupt is to be used to wake system, otherwise "irq" should be used. +- wakeup-source: Flag to indicate this device can wake system (suspend/resume). + +- clocks : phandle and clock specifier for codec MCLK. +- clock-names : Clock name string for 'clocks' attribute, should be "mclk". + +- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine + [<1050>, <1100>, <1200>, <1400>] +- dlg,micbias-lvl : Voltage (mV) for Mic Bias + [<1800>, <2000>, <2200>, <2400>, <2600>] +- dlg,mic-amp-in-sel : Mic input source type + ["diff", "se_p", "se_n"] + +====== + +Child node - 'da7219_aad': + +Optional properties: +- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV). + [<2800>, <2900>] +- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms) +- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms) + [<2>, <5>, <10>, <50>, <100>, <200>, <500>] +- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms) + [<200>, <500>, <750>, <1000>] +- dlg,jack-ins-deb : Debounce time for jack insertion (ms) + [<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>] +- dlg,jack-det-rate: Jack type detection latency (3/4 pole) + ["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"] +- dlg,jack-rem-deb : Debounce time for jack removal (ms) + [<1>, <5>, <10>, <20>] +- dlg,a-d-btn-thr : Impedance threshold between buttons A and D + [0x0 - 0xFF] +- dlg,d-b-btn-thr : Impedance threshold between buttons D and B + [0x0 - 0xFF] +- dlg,b-c-btn-thr : Impedance threshold between buttons B and C + [0x0 - 0xFF] +- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic + [0x0 - 0xFF] +- dlg,btn-avg : Number of 8-bit readings for averaged button measurement + [<1>, <2>, <4>, <8>] +- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement + [<1>, <2>, <4>, <8>] + +====== + +Example: + + codec: da7219@1a { + compatible = "dlg,da7219"; + reg = <0x1a>; + + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + VDD-supply = <®_audio>; + VDDMIC-supply = <®_audio>; + VDDIO-supply = <®_audio>; + + clocks = <&clks 201>; + clock-names = "mclk"; + + dlg,ldo-lvl = <1200>; + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + + da7219_aad { + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-det-rate = "32ms_64ms"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + + dlg,btn-avg = <4>; + dlg,adc-1bit-rpt = <1>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/kernel/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index a96774c19..ce55c0a6f 100644 --- a/kernel/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/kernel/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -13,13 +13,15 @@ So having this generic sound card allows all Freescale SoC users to benefit from the simplification of a new card support and the capability of the wide sample rates support through ASRC. -Note: The card is initially designed for those sound cards who use I2S and - PCM DAI formats. However, it'll be also possible to support those non - I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as long - as the driver has been properly upgraded. +Note: The card is initially designed for those sound cards who use AC'97, I2S + and PCM DAI formats. However, it'll be also possible to support those non + AC'97/I2S/PCM type sound cards, such as S/PDIF audio and HDMI audio, as + long as the driver has been properly upgraded. The compatible list for this generic sound card currently: + "fsl,imx-audio-ac97" + "fsl,imx-audio-cs42888" "fsl,imx-audio-wm8962" diff --git a/kernel/Documentation/devicetree/bindings/sound/gtm601.txt b/kernel/Documentation/devicetree/bindings/sound/gtm601.txt new file mode 100644 index 000000000..5efc8c068 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/gtm601.txt @@ -0,0 +1,13 @@ +GTM601 UMTS modem audio interface CODEC + +This device has no configuration interface. Sample rate is fixed - 8kHz. + +Required properties: + + - compatible : "option,gtm601" + +Example: + +codec: gtm601_codec { + compatible = "option,gtm601"; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/ics43432.txt b/kernel/Documentation/devicetree/bindings/sound/ics43432.txt new file mode 100644 index 000000000..b02e3a6c0 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/ics43432.txt @@ -0,0 +1,17 @@ +Invensense ICS-43432 MEMS microphone with I2S output. + +There are no software configuration options for this device, indeed, the only +host connection is the I2S interface. Apart from requirements on clock +frequency (460 kHz to 3.379 MHz according to the data sheet) there must be +64 clock cycles in each stereo output frame; 24 of the 32 available bits +contain audio data. A hardware pin determines if the device outputs data +on the left or right channel of the I2S frame. + +Required properties: + - compatible : Must be "invensense,ics43432" + +Example: + + ics43432: ics43432 { + compatible = "invensense,ics43432"; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/max98090.txt b/kernel/Documentation/devicetree/bindings/sound/max98090.txt index aa802a274..4e3be6682 100644 --- a/kernel/Documentation/devicetree/bindings/sound/max98090.txt +++ b/kernel/Documentation/devicetree/bindings/sound/max98090.txt @@ -18,6 +18,12 @@ Optional properties: - maxim,dmic-freq: Frequency at which to clock DMIC +- maxim,micbias: Micbias voltage applies to the analog mic, valid voltages value are: + 0 - 2.2v + 1 - 2.55v + 2 - 2.4v + 3 - 2.8v + Pins on the device (for linking into audio routes): * MIC1 diff --git a/kernel/Documentation/devicetree/bindings/sound/max98357a.txt b/kernel/Documentation/devicetree/bindings/sound/max98357a.txt index a7a149a23..28645a2ff 100644 --- a/kernel/Documentation/devicetree/bindings/sound/max98357a.txt +++ b/kernel/Documentation/devicetree/bindings/sound/max98357a.txt @@ -4,7 +4,11 @@ This node models the Maxim MAX98357A DAC. Required properties: - compatible : "maxim,max98357a" -- sdmode-gpios : GPIO specifier for the GPIO -> DAC SDMODE pin + +Optional properties: +- sdmode-gpios : GPIO specifier for the chip's SD_MODE pin. + If this option is not specified then driver does not manage + the pin state (e.g. chip is always on). Example: diff --git a/kernel/Documentation/devicetree/bindings/sound/mt8173-max98090.txt b/kernel/Documentation/devicetree/bindings/sound/mt8173-max98090.txt new file mode 100644 index 000000000..519e97c8f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/mt8173-max98090.txt @@ -0,0 +1,15 @@ +MT8173 with MAX98090 CODEC + +Required properties: +- compatible : "mediatek,mt8173-max98090" +- mediatek,audio-codec: the phandle of the MAX98090 audio codec +- mediatek,platform: the phandle of MT8173 ASoC platform + +Example: + + sound { + compatible = "mediatek,mt8173-max98090"; + mediatek,audio-codec = <&max98090>; + mediatek,platform = <&afe>; + }; + diff --git a/kernel/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt b/kernel/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt new file mode 100644 index 000000000..f205ce9e3 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/mt8173-rt5650-rt5676.txt @@ -0,0 +1,15 @@ +MT8173 with RT5650 RT5676 CODECS + +Required properties: +- compatible : "mediatek,mt8173-rt5650-rt5676" +- mediatek,audio-codec: the phandles of rt5650 and rt5676 codecs +- mediatek,platform: the phandle of MT8173 ASoC platform + +Example: + + sound { + compatible = "mediatek,mt8173-rt5650-rt5676"; + mediatek,audio-codec = <&rt5650 &rt5676>; + mediatek,platform = <&afe>; + }; + diff --git a/kernel/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt b/kernel/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt new file mode 100644 index 000000000..e302c7f43 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/mtk-afe-pcm.txt @@ -0,0 +1,45 @@ +Mediatek AFE PCM controller + +Required properties: +- compatible = "mediatek,mt8173-afe-pcm"; +- reg: register location and size +- interrupts: Should contain AFE interrupt +- clock-names: should have these clock names: + "infra_sys_audio_clk", + "top_pdn_audio", + "top_pdn_aud_intbus", + "bck0", + "bck1", + "i2s0_m", + "i2s1_m", + "i2s2_m", + "i2s3_m", + "i2s3_b"; + +Example: + + afe: mt8173-afe-pcm@11220000 { + compatible = "mediatek,mt8173-afe-pcm"; + reg = <0 0x11220000 0 0x1000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_FALLING>; + clocks = <&infracfg INFRA_AUDIO>, + <&topckgen TOP_AUDIO_SEL>, + <&topckgen TOP_AUD_INTBUS_SEL>, + <&topckgen TOP_APLL1_DIV0>, + <&topckgen TOP_APLL2_DIV0>, + <&topckgen TOP_I2S0_M_CK_SEL>, + <&topckgen TOP_I2S1_M_CK_SEL>, + <&topckgen TOP_I2S2_M_CK_SEL>, + <&topckgen TOP_I2S3_M_CK_SEL>, + <&topckgen TOP_I2S3_B_CK_SEL>; + clock-names = "infra_sys_audio_clk", + "top_pdn_audio", + "top_pdn_aud_intbus", + "bck0", + "bck1", + "i2s0_m", + "i2s1_m", + "i2s2_m", + "i2s3_m", + "i2s3_b"; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/nau8825.txt b/kernel/Documentation/devicetree/bindings/sound/nau8825.txt new file mode 100644 index 000000000..d3374231c --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/nau8825.txt @@ -0,0 +1,102 @@ +Nuvoton NAU8825 audio codec + +This device supports I2C only. + +Required properties: + - compatible : Must be "nuvoton,nau8825" + + - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1). + +Optional properties: + - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. + - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, + otherwise pin in high impedance state. + - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. + - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. + + - nuvoton,vref-impedance: VREF Impedance selection + 0 - Open + 1 - 25 kOhm + 2 - 125 kOhm + 3 - 2.5 kOhm + + - nuvoton,micbias-voltage: Micbias voltage level. + 0 - VDDA + 1 - VDDA + 2 - VDDA * 1.1 + 3 - VDDA * 1.2 + 4 - VDDA * 1.3 + 5 - VDDA * 1.4 + 6 - VDDA * 1.53 + 7 - VDDA * 1.53 + + - nuvoton,sar-threshold-num: Number of buttons supported + - nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons configuration. SAR value is calculated as + SAR = 255 * MICBIAS / SAR_VOLTAGE * R / (2000 + R) + where MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-voltage', R - button impedance. + Refer datasheet section 10.2 for more information about threshold calculation. + + - nuvoton,sar-hysteresis: Button impedance measurement hysteresis. + + - nuvoton,sar-voltage: Reference voltage for button impedance measurement. + 0 - VDDA + 1 - VDDA + 2 - VDDA * 1.1 + 3 - VDDA * 1.2 + 4 - VDDA * 1.3 + 5 - VDDA * 1.4 + 6 - VDDA * 1.53 + 7 - VDDA * 1.53 + + - nuvoton,sar-compare-time: SAR compare time + 0 - 500 ns + 1 - 1 us + 2 - 2 us + 3 - 4 us + + - nuvoton,sar-sampling-time: SAR sampling time + 0 - 2 us + 1 - 4 us + 2 - 8 us + 3 - 16 us + + - nuvoton,short-key-debounce: Button short key press debounce time. + 0 - 30 ms + 1 - 50 ms + 2 - 100 ms + 3 - 30 ms + + - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms + - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms + + - clocks: list of phandle and clock specifier pairs according to common clock bindings for the + clocks described in clock-names + - clock-names: should include "mclk" for the MCLK master clock + +Example: + + headset: nau8825@1a { + compatible = "nuvoton,nau8825"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + // Setup 4 buttons impedance according to Android specification + nuvoton,sar-threshold-num = <4>; + nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; + nuvoton,sar-hysteresis = <1>; + nuvoton,sar-voltage = <0>; + nuvoton,sar-compare-time = <0>; + nuvoton,sar-sampling-time = <0>; + nuvoton,short-key-debounce = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <7>; + + clock-names = "mclk"; + clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/kernel/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt index 13e2ef496..275c6ea35 100644 --- a/kernel/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt +++ b/kernel/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt @@ -8,10 +8,10 @@ Required properties: - interrupts : The interrupt from the HDA controller. - clocks : Must contain an entry for each required entry in clock-names. See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi +- clock-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. -- reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi +- reset-names : Must include the following entries: hda, hda2hdmi, hda2codec_2x Example: @@ -24,7 +24,7 @@ hda@0,70030000 { <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ - <&tegra_car 128>; /* hda2hdmi */ - <&tegra_car 111>, /* hda2codec_2x */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ reset-names = "hda", "hda2hdmi", "hda2codec_2x"; }; diff --git a/kernel/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt b/kernel/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt new file mode 100644 index 000000000..48129368d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt @@ -0,0 +1,60 @@ +* Qualcomm Technologies APQ8016 SBC ASoC machine driver + +This node models the Qualcomm Technologies APQ8016 SBC ASoC machine driver + +Required properties: + +- compatible : "qcom,apq8016-sbc-sndcard" + +- pinctrl-N : One property must exist for each entry in + pinctrl-names. See ../pinctrl/pinctrl-bindings.txt + for details of the property values. +- pinctrl-names : Must contain a "default" entry. +- reg : Must contain an address for each entry in reg-names. +- reg-names : A list which must include the following entries: + * "mic-iomux" + * "spkr-iomux" +- qcom,model : Name of the sound card. + +Dai-link subnode properties and subnodes: + +Required dai-link subnodes: + +- cpu : CPU sub-node +- codec : CODEC sub-node + +Required CPU/CODEC subnodes properties: + +-link-name : Name of the dai link. +-sound-dai : phandle and port of CPU/CODEC +-capture-dai : phandle and port of CPU/CODEC + +Example: + +sound: sound { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + qcom,model = "DB410c"; + + /* I2S - Internal codec */ + internal-dai-link@0 { + cpu { /* PRIMARY */ + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&wcd_codec 0>; + }; + }; + + /* External Primary or External Secondary -ADV7533 HDMI */ + external-dai-link@0 { + link-name = "ADV7533"; + cpu { /* QUAT */ + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/kernel/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt index e00732dac..21c648328 100644 --- a/kernel/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt +++ b/kernel/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt @@ -4,12 +4,21 @@ This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). Required properties: -- compatible : "qcom,lpass-cpu" +- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" - clocks : Must contain an entry for each entry in clock-names. - clock-names : A list which must include the following entries: * "ahbix-clk" * "mi2s-osr-clk" * "mi2s-bit-clk" + : required clocks for "qcom,lpass-cpu-apq8016" + * "ahbix-clk" + * "mi2s-bit-clk0" + * "mi2s-bit-clk1" + * "mi2s-bit-clk2" + * "mi2s-bit-clk3" + * "pcnoc-mport-clk" + * "pcnoc-sway-clk" + - interrupts : Must contain an entry for each entry in interrupt-names. - interrupt-names : A list which must include the following entries: @@ -22,6 +31,8 @@ Required properties: - reg-names : A list which must include the following entries: * "lpass-lpaif" + + Optional properties: - qcom,adsp : Phandle for the audio DSP node diff --git a/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index f316ce1f2..c57cbd657 100644 --- a/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -4,9 +4,12 @@ Required properties: - compatible : "renesas,rcar_sound-<soctype>", fallbacks "renesas,rcar_sound-gen1" if generation1, and "renesas,rcar_sound-gen2" if generation2 + "renesas,rcar_sound-gen3" if generation3 Examples with soctypes are: + - "renesas,rcar_sound-r8a7778" (R-Car M1A) - "renesas,rcar_sound-r8a7790" (R-Car H2) - "renesas,rcar_sound-r8a7791" (R-Car M2-W) + - "renesas,rcar_sound-r8a7795" (R-Car H3) - reg : Should contain the register physical address. required register is SRU/ADG/SSI if generation1 @@ -17,12 +20,23 @@ Required properties: - rcar_sound,src : Should contain SRC feature. The number of SRC subnode should be same as HW. see below for detail. +- rcar_sound,ctu : Should contain CTU feature. + The number of CTU subnode should be same as HW. + see below for detail. +- rcar_sound,mix : Should contain MIX feature. + The number of MIX subnode should be same as HW. + see below for detail. - rcar_sound,dvc : Should contain DVC feature. The number of DVC subnode should be same as HW. see below for detail. - rcar_sound,dai : DAI contents. The number of DAI subnode should be same as HW. see below for detail. +- #sound-dai-cells : it must be 0 if your system is using single DAI + it must be 1 if your system is using multi DAI +- #clock-cells : it must be 0 if your system has audio_clkout + it must be 1 if your system has audio_clkout0/1/2/3 +- clock-frequency : for all audio_clkout0/1/2/3 SSI subnode properties: - interrupts : Should contain SSI interrupt for PIO transfer @@ -47,7 +61,7 @@ DAI subnode properties: Example: -rcar_sound: rcar_sound@ec500000 { +rcar_sound: sound@ec500000 { #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2"; reg = <0 0xec500000 0 0x1000>, /* SCU */ @@ -89,6 +103,22 @@ rcar_sound: rcar_sound@ec500000 { }; }; + rcar_sound,mix { + mix0: mix@0 { }; + mix1: mix@1 { }; + }; + + rcar_sound,ctu { + ctu00: ctu@0 { }; + ctu01: ctu@1 { }; + ctu02: ctu@2 { }; + ctu03: ctu@3 { }; + ctu10: ctu@4 { }; + ctu11: ctu@5 { }; + ctu12: ctu@6 { }; + ctu13: ctu@7 { }; + }; + rcar_sound,src { src0: src@0 { interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>; diff --git a/kernel/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt b/kernel/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt index c64155027..962748a8d 100644 --- a/kernel/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt +++ b/kernel/Documentation/devicetree/bindings/sound/renesas,rsrc-card.txt @@ -6,6 +6,7 @@ Required properties: - compatible : "renesas,rsrc-card,<board>" Examples with soctypes are: + - "renesas,rsrc-card" - "renesas,rsrc-card,lager" - "renesas,rsrc-card,koelsch" Optional properties: @@ -29,6 +30,12 @@ Optional subnode properties: - frame-inversion : bool property. Add this if the dai-link uses frame clock inversion. - convert-rate : platform specified sampling rate convert +- audio-prefix : see audio-routing +- audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources. + use audio-prefix if some components is using same sink/sources naming. + it can be used if compatible was "renesas,rsrc-card"; Required CPU/CODEC subnodes properties: diff --git a/kernel/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/kernel/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 9b82c20b3..2267d249c 100644 --- a/kernel/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/kernel/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -12,8 +12,6 @@ Required properties: - reg: physical base address of the controller and length of memory mapped region. - interrupts: should contain the I2S interrupt. -- #address-cells: should be 1. -- #size-cells: should be 0. - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: should include "tx" and "rx". @@ -21,6 +19,7 @@ Required properties: - clock-names: should contain followings: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller +- rockchip,capture-channels: max capture channels, if not set, 2 channels default. Example for rk3288 I2S controller: @@ -28,10 +27,9 @@ i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; dma-names = "tx", "rx"; clock-names = "i2s_hclk", "i2s_clk"; clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + rockchip,capture-channels = <2>; }; diff --git a/kernel/Documentation/devicetree/bindings/sound/rockchip-max98090.txt b/kernel/Documentation/devicetree/bindings/sound/rockchip-max98090.txt new file mode 100644 index 000000000..a805aa99a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/rockchip-max98090.txt @@ -0,0 +1,19 @@ +ROCKCHIP with MAX98090 CODEC + +Required properties: +- compatible: "rockchip,rockchip-audio-max98090" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the MAX98090 audio codec +- rockchip,headset-codec: The phandle of Ext chip for jack detection + +Example: + +sound { + compatible = "rockchip,rockchip-audio-max98090"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&max98090>; + rockchip,headset-codec = <&headsetcodec>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt b/kernel/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt new file mode 100644 index 000000000..411a62b3f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/rockchip-rt5645.txt @@ -0,0 +1,17 @@ +ROCKCHIP with RT5645/RT5650 CODECS + +Required properties: +- compatible: "rockchip,rockchip-audio-rt5645" +- rockchip,model: The user-visible name of this sound complex +- rockchip,i2s-controller: The phandle of the Rockchip I2S controller that's + connected to the CODEC +- rockchip,audio-codec: The phandle of the RT5645/RT5650 audio codec + +Example: + +sound { + compatible = "rockchip,rockchip-audio-rt5645"; + rockchip,model = "ROCKCHIP-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&rt5645>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/kernel/Documentation/devicetree/bindings/sound/rockchip-spdif.txt new file mode 100644 index 000000000..e64dbdea7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -0,0 +1,40 @@ +* Rockchip SPDIF transceiver + +The S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + +- compatible: should be one of the following: + - "rockchip,rk3288-spdif", "rockchip,rk3188-spdif" or + "rockchip,rk3066-spdif" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: should contain the SPDIF interrupt. +- dmas: DMA specifiers for tx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should be "tx" +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: should contain following: + - "hclk": clock for SPDIF controller + - "mclk" : clock for SPDIF bus + +Required properties on RK3288: + - rockchip,grf: the phandle of the syscon node for the general register + file (GRF) + +Example for the rk3188 SPDIF controller: + +spdif: spdif@0x1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + status = "disabled"; + #sound-dai-cells = <0>; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/rt5640.txt b/kernel/Documentation/devicetree/bindings/sound/rt5640.txt index bac4d9ac1..9e62f6eb3 100644 --- a/kernel/Documentation/devicetree/bindings/sound/rt5640.txt +++ b/kernel/Documentation/devicetree/bindings/sound/rt5640.txt @@ -14,7 +14,8 @@ Optional properties: - realtek,in1-differential - realtek,in2-differential - Boolean. Indicate MIC1/2 input are differential, rather than single-ended. +- realtek,in3-differential + Boolean. Indicate MIC1/2/3 input are differential, rather than single-ended. - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. @@ -24,9 +25,11 @@ Pins on the device (for linking into audio routes) for RT5639/RT5640: * DMIC2 * MICBIAS1 * IN1P - * IN1R + * IN1N * IN2P - * IN2R + * IN2N + * IN3P + * IN3N * HPOL * HPOR * LOUTL diff --git a/kernel/Documentation/devicetree/bindings/sound/rt5645.txt b/kernel/Documentation/devicetree/bindings/sound/rt5645.txt new file mode 100644 index 000000000..7cee1f518 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/rt5645.txt @@ -0,0 +1,72 @@ +RT5650/RT5645 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : One of "realtek,rt5645" or "realtek,rt5650". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Optional properties: + +- hp-detect-gpios: + a GPIO spec for the external headphone detect pin. If jd-mode = 0, + we will get the JD status by getting the value of hp-detect-gpios. + +- realtek,in2-differential + Boolean. Indicate MIC2 input are differential, rather than single-ended. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using IN2P pin as dmic1 data pin + 2: using GPIO6 pin as dmic1 data pin + 3: using GPIO10 pin as dmic1 data pin + 4: using GPIO12 pin as dmic1 data pin + +- realtek,dmic2-data-pin + 0: dmic2 is not used + 1: using IN2N pin as dmic2 data pin + 2: using GPIO5 pin as dmic2 data pin + 3: using GPIO11 pin as dmic2 data pin + +-- realtek,jd-mode : The JD mode of rt5645/rt5650 + 0 : rt5645/rt5650 JD function is not used + 1 : Mode-0 (VDD=3.3V), two port jack detection + 2 : Mode-1 (VDD=3.3V), one port jack detection + 3 : Mode-2 (VDD=1.8V), one port jack detection + +Pins on the device (for linking into audio routes) for RT5645/RT5650: + + * DMIC L1 + * DMIC R1 + * DMIC L2 + * DMIC R2 + * IN1P + * IN1N + * IN2P + * IN2N + * Haptic Generator + * HPOL + * HPOR + * LOUTL + * LOUTR + * PDM1L + * PDM1R + * SPOL + * SPOR + +Example: + +codec: rt5650@1a { + compatible = "realtek,rt5650"; + reg = <0x1a>; + hp-detect-gpios = <&gpio 19 0>; + interrupt-parent = <&gpio>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + realtek,dmic-en = "true"; + realtek,en-jd-func = "true"; + realtek,jd-mode = <3>; +};
\ No newline at end of file diff --git a/kernel/Documentation/devicetree/bindings/sound/rt5677.txt b/kernel/Documentation/devicetree/bindings/sound/rt5677.txt index 740ff771a..f07078997 100644 --- a/kernel/Documentation/devicetree/bindings/sound/rt5677.txt +++ b/kernel/Documentation/devicetree/bindings/sound/rt5677.txt @@ -18,6 +18,7 @@ Required properties: Optional properties: - realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin. +- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. - realtek,in1-differential - realtek,in2-differential @@ -70,6 +71,7 @@ rt5677 { realtek,pow-ldo2-gpio = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>; realtek,in1-differential = "true"; realtek,gpio-config = /bits/ 8 <0 0 0 0 0 2>; /* pull up GPIO6 */ realtek,jd2-gpio = <3>; /* Enables Jack detection for GPIO6 */ diff --git a/kernel/Documentation/devicetree/bindings/sound/simple-card.txt b/kernel/Documentation/devicetree/bindings/sound/simple-card.txt index 73bf314f7..cf3979eb3 100644 --- a/kernel/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/kernel/Documentation/devicetree/bindings/sound/simple-card.txt @@ -16,7 +16,8 @@ Optional properties: connection's sink, the second being the connection's source. - simple-audio-card,mclk-fs : Multiplication factor between stream rate and codec - mclk. + mclk. When defined, mclk-fs property defined in + dai-link sub nodes are ignored. - simple-audio-card,hp-det-gpio : Reference to GPIO that signals when headphones are attached. - simple-audio-card,mic-det-gpio : Reference to GPIO that signals when @@ -55,6 +56,9 @@ Optional dai-link subnode properties: dai-link uses bit clock inversion. - frame-inversion : bool property. Add this if the dai-link uses frame clock inversion. +- mclk-fs : Multiplication factor between stream + rate and codec mclk, applied only for + the dai-link. For backward compatibility the frame-master and bitclock-master properties can be used as booleans in codec subnode to indicate if the diff --git a/kernel/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt b/kernel/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt new file mode 100644 index 000000000..028fa1c82 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt @@ -0,0 +1,155 @@ +STMicroelectronics sti ASoC cards + +The sti ASoC Sound Card can be used, for all sti SoCs using internal sti-sas +codec or external codecs. + +sti sound drivers allows to expose sti SoC audio interface through the +generic ASoC simple card. For details about sound card declaration please refer to +Documentation/devicetree/bindings/sound/simple-card.txt. + +1) sti-uniperiph-dai: audio dai device. +--------------------------------------- + +Required properties: + - compatible: "st,sti-uni-player" or "st,sti-uni-reader" + + - st,syscfg: phandle to boot-device system configuration registers + + - clock-names: name of the clocks listed in clocks property in the same order + + - reg: CPU DAI IP Base address and size entries, listed in same + order than the CPU_DAI properties. + + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + + - interrupts: CPU_DAI interrupt line, listed in the same order than the + CPU_DAI properties. + + - dma: CPU_DAI DMA controller phandle and DMA request line, listed in the same + order than the CPU_DAI properties. + + - dma-names: identifier string for each DMA request line in the dmas property. + "tx" for "st,sti-uni-player" compatibility + "rx" for "st,sti-uni-reader" compatibility + + - version: IP version integrated in SOC. + + - dai-name: DAI name that describes the IP. + +Required properties ("st,sti-uni-player" compatibility only): + - clocks: CPU_DAI IP clock source, listed in the same order than the + CPU_DAI properties. + + - uniperiph-id: internal SOC IP instance ID. + + - IP mode: IP working mode depending on associated codec. + "HDMI" connected to HDMI codec IP and IEC HDMI formats. + "SPDIF"connected to SPDIF codec and support SPDIF formats. + "PCM" PCM standard mode for I2S or TDM bus. + +Optional properties: + - pinctrl-0: defined for CPU_DAI@1 and CPU_DAI@4 to describe I2S PIOs for + external codecs connection. + + - pinctrl-names: should contain only one value - "default". + +Example: + + sti_uni_player2: sti-uni-player@2 { + compatible = "st,sti-uni-player"; + status = "okay"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + clocks = <&clk_s_d0_flexgen CLK_PCM_2>; + reg = <0x8D82000 0x158>; + interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; + dmas = <&fdma0 4 0 1>; + dai-name = "Uni Player #1 (DAC)"; + dma-names = "tx"; + uniperiph-id = <2>; + version = <5>; + mode = "PCM"; + }; + + sti_uni_player3: sti-uni-player@3 { + compatible = "st,sti-uni-player"; + status = "okay"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; + reg = <0x8D85000 0x158>; + interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; + dmas = <&fdma0 7 0 1>; + dma-names = "tx"; + dai-name = "Uni Player #1 (PIO)"; + uniperiph-id = <3>; + version = <5>; + mode = "SPDIF"; + }; + + sti_uni_reader1: sti-uni-reader@1 { + compatible = "st,sti-uni-reader"; + status = "disabled"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + reg = <0x8D84000 0x158>; + interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>; + dmas = <&fdma0 6 0 1>; + dma-names = "rx"; + dai-name = "Uni Reader #1 (HDMI RX)"; + version = <3>; + }; + +2) sti-sas-codec: internal audio codec IPs driver +------------------------------------------------- + +Required properties: + - compatible: "st,sti<chip>-sas-codec" . + Should be chip "st,stih416-sas-codec" or "st,stih407-sas-codec" + + - st,syscfg: phandle to boot-device system configuration registers. + + - pinctrl-0: SPDIF PIO description. + + - pinctrl-names: should contain only one value - "default". + +Example: + sti_sas_codec: sti-sas-codec { + compatible = "st,stih407-sas-codec"; + #sound-dai-cells = <1>; + st,reg_audio = <&syscfg_core>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif_out >; + }; + +Example of audio card declaration: + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sti audio card"; + status = "okay"; + + simple-audio-card,dai-link@0 { + /* DAC */ + format = "i2s"; + dai-tdm-slot-width = <32>; + cpu { + sound-dai = <&sti_uni_player2>; + }; + + codec { + sound-dai = <&sti_sasg_codec 1>; + }; + }; + simple-audio-card,dai-link@1 { + /* SPDIF */ + format = "left_j"; + cpu { + sound-dai = <&sti_uni_player3>; + }; + + codec { + sound-dai = <&sti_sasg_codec 0>; + }; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/kernel/Documentation/devicetree/bindings/sound/sun4i-codec.txt new file mode 100644 index 000000000..c92966bd5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/sun4i-codec.txt @@ -0,0 +1,27 @@ +* Allwinner A10 Codec + +Required properties: +- compatible: must be either "allwinner,sun4i-a10-codec" or + "allwinner,sun7i-a20-codec" +- reg: must contain the registers location and length +- interrupts: must contain the codec interrupt +- dmas: DMA channels for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should include "tx" and "rx". +- clocks: a list of phandle + clock-specifer pairs, one for each entry + in clock-names. +- clock-names: should contain followings: + - "apb": the parent APB clock for this controller + - "codec": the parent module clock + +Example: +codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun7i-a20-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <0 30 4>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma 0 19>, <&dma 0 19>; + dma-names = "rx", "tx"; +}; diff --git a/kernel/Documentation/devicetree/bindings/sound/tas2552.txt b/kernel/Documentation/devicetree/bindings/sound/tas2552.txt index 55e2a0af5..c49992c0b 100644 --- a/kernel/Documentation/devicetree/bindings/sound/tas2552.txt +++ b/kernel/Documentation/devicetree/bindings/sound/tas2552.txt @@ -14,6 +14,12 @@ Required properties: Optional properties: - enable-gpio - gpio pin to enable/disable the device +tas2552 can receive it's reference clock via MCLK, BCLK, IVCLKIN pin or use the +internal 1.8MHz. This CLKIN is used by the PLL. In addition to PLL, the PDM +reference clock is also selectable: PLL, IVCLKIN, BCLK or MCLK. +For system integration the dt-bindings/sound/tas2552.h header file provides +defined values to selct and configure the PLL and PDM reference clocks. + Example: tas2552: tas2552@41 { diff --git a/kernel/Documentation/devicetree/bindings/sound/tas571x.txt b/kernel/Documentation/devicetree/bindings/sound/tas571x.txt new file mode 100644 index 000000000..0ac31d8d5 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/tas571x.txt @@ -0,0 +1,41 @@ +Texas Instruments TAS5711/TAS5717/TAS5719 stereo power amplifiers + +The codec is controlled through an I2C interface. It also has two other +signals that can be wired up to GPIOs: reset (strongly recommended), and +powerdown (optional). + +Required properties: + +- compatible: "ti,tas5711", "ti,tas5717", or "ti,tas5719" +- reg: The I2C address of the device +- #sound-dai-cells: must be equal to 0 + +Optional properties: + +- reset-gpios: GPIO specifier for the TAS571x's active low reset line +- pdn-gpios: GPIO specifier for the TAS571x's active low powerdown line +- clocks: clock phandle for the MCLK input +- clock-names: should be "mclk" +- AVDD-supply: regulator phandle for the AVDD supply (all chips) +- DVDD-supply: regulator phandle for the DVDD supply (all chips) +- HPVDD-supply: regulator phandle for the HPVDD supply (5717/5719) +- PVDD_AB-supply: regulator phandle for the PVDD_AB supply (5717/5719) +- PVDD_CD-supply: regulator phandle for the PVDD_CD supply (5717/5719) +- PVDD_A-supply: regulator phandle for the PVDD_A supply (5711) +- PVDD_B-supply: regulator phandle for the PVDD_B supply (5711) +- PVDD_C-supply: regulator phandle for the PVDD_C supply (5711) +- PVDD_D-supply: regulator phandle for the PVDD_D supply (5711) + +Example: + + tas5717: audio-codec@2a { + compatible = "ti,tas5717"; + reg = <0x2a>; + #sound-dai-cells = <0>; + + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + + clocks = <&clk_core CLK_I2S>; + clock-names = "mclk"; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/tdm-slot.txt b/kernel/Documentation/devicetree/bindings/sound/tdm-slot.txt index 6a2c84247..34cf70e2c 100644 --- a/kernel/Documentation/devicetree/bindings/sound/tdm-slot.txt +++ b/kernel/Documentation/devicetree/bindings/sound/tdm-slot.txt @@ -4,11 +4,15 @@ This specifies audio DAI's TDM slot. TDM slot properties: dai-tdm-slot-num : Number of slots in use. -dai-tdm-slot-width : Width in bits for each slot. +dai-tdm-slot-width : Width in bits for each slot. +dai-tdm-slot-tx-mask : Transmit direction slot mask, optional +dai-tdm-slot-rx-mask : Receive direction slot mask, optional For instance: dai-tdm-slot-num = <2>; dai-tdm-slot-width = <8>; + dai-tdm-slot-tx-mask = <0 1>; + dai-tdm-slot-rx-mask = <1 0>; And for each spcified driver, there could be one .of_xlate_tdm_slot_mask() to specify a explicit mapping of the channels and the slots. If it's absent @@ -18,3 +22,8 @@ tx and rx masks. For snd_soc_of_xlate_tdm_slot_mask(), the tx and rx masks will use a 1 bit for an active slot as default, and the default active bits are at the LSB of the masks. + +The explicit masks are given as array of integers, where the first +number presents bit-0 (LSB), second presents bit-1, etc. Any non zero +number is considered 1 and 0 is 0. snd_soc_of_xlate_tdm_slot_mask() +does not do anything, if either mask is set non zero value. diff --git a/kernel/Documentation/devicetree/bindings/sound/wm8741.txt b/kernel/Documentation/devicetree/bindings/sound/wm8741.txt index 74bda58c1..a13315408 100644 --- a/kernel/Documentation/devicetree/bindings/sound/wm8741.txt +++ b/kernel/Documentation/devicetree/bindings/sound/wm8741.txt @@ -10,9 +10,20 @@ Required properties: - reg : the I2C address of the device for I2C, the chip select number for SPI. +Optional properties: + + - diff-mode: Differential output mode configuration. Default value for field + DIFF in register R8 (MODE_CONTROL_2). If absent, the default is 0, shall be: + 0 = stereo + 1 = mono left + 2 = stereo reversed + 3 = mono right + Example: codec: wm8741@1a { compatible = "wlf,wm8741"; reg = <0x1a>; + + diff-mode = <3>; }; diff --git a/kernel/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/kernel/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt new file mode 100644 index 000000000..7e5aa6f6b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt @@ -0,0 +1,44 @@ +ZTE ZX296702 I2S controller + +Required properties: + - compatible : Must be "zte,zx296702-i2s" + - reg : Must contain I2S core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + - clock-names: "tx" for the clock to the I2S interface. + - dmas: Pairs of phandle and specifier for the DMA channel that is used by + the core. The core expects two dma channels for transmit. + - dma-names : Must be "tx" and "rx" + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + i2s0: i2s0@0b005000 { + #sound-dai-cells = <0>; + compatible = "zte,zx296702-i2s"; + reg = <0x0b005000 0x1000>; + clocks = <&lsp0clk ZX296702_I2S0_DIV>; + clock-names = "tx"; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 5>, <&dma 6>; + dma-names = "tx", "rx"; + status = "okay"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "zx296702_snd"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcodec>; + simple-audio-card,frame-master = <&sndcodec>; + sndcpu: simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&acodec>; + }; + }; diff --git a/kernel/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/kernel/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt new file mode 100644 index 000000000..989544ea6 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt @@ -0,0 +1,28 @@ +ZTE ZX296702 SPDIF controller + +Required properties: + - compatible : Must be "zte,zx296702-spdif" + - reg : Must contain SPDIF core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + - clock-names: "tx" for the clock to the SPDIF interface. + - dmas: Pairs of phandle and specifier for the DMA channel that is used by + the core. The core expects one dma channel for transmit. + - dma-names : Must be "tx" + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + spdif0: spdif0@0b004000 { + compatible = "zte,zx296702-spdif"; + reg = <0x0b004000 0x1000>; + clocks = <&lsp0clk ZX296702_SPDIF0_DIV>; + clock-names = "tx"; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 4>; + dma-names = "tx"; + status = "okay"; + }; diff --git a/kernel/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt b/kernel/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt new file mode 100644 index 000000000..9887b0724 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/spi/brcm,bcm2835-aux-spi.txt @@ -0,0 +1,38 @@ +Broadcom BCM2835 auxiliar SPI1/2 controller + +The BCM2835 contains two forms of SPI master controller, one known simply as +SPI0, and the other known as the "Universal SPI Master"; part of the +auxiliary block. This binding applies to the SPI1/2 controller. + +Required properties: +- compatible: Should be "brcm,bcm2835-aux-spi". +- reg: Should contain register location and length for the spi block +- interrupts: Should contain shared interrupt of the aux block +- clocks: The clock feeding the SPI controller - needs to + point to the auxiliar clock driver of the bcm2835, + as this clock will enable the output gate for the specific + clock. +- cs-gpios: the cs-gpios (native cs is NOT supported) + see also spi-bus.txt + +Example: + +spi1@7e215080 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e215080 0x40>; + interrupts = <1 29>; + clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio 18>, <&gpio 17>, <&gpio 16>; +}; + +spi2@7e2150c0 { + compatible = "brcm,bcm2835-aux-spi"; + reg = <0x7e2150c0 0x40>; + interrupts = <1 29>; + clocks = <&aux_clocks BCM2835_AUX_CLOCK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; + cs-gpios = <&gpio 43>, <&gpio 44>, <&gpio 45>; +}; diff --git a/kernel/Documentation/devicetree/bindings/spi/sh-msiof.txt b/kernel/Documentation/devicetree/bindings/spi/sh-msiof.txt index 4c388bb2f..705075da2 100644 --- a/kernel/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/kernel/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -51,7 +51,7 @@ Optional properties, deprecated for soctype-specific bindings: - renesas,tx-fifo-size : Overrides the default tx fifo size given in words (default is 64) - renesas,rx-fifo-size : Overrides the default rx fifo size given in words - (default is 64, or 256 on R-Car Gen2) + (default is 64) Pinctrl properties might be needed, too. See Documentation/devicetree/bindings/pinctrl/renesas,*. @@ -60,7 +60,7 @@ Example: msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; diff --git a/kernel/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/kernel/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt index bd99193e8..204b311e0 100644 --- a/kernel/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ b/kernel/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -10,6 +10,8 @@ Required properties: Optional properties: - cs-gpios : Specifies the gpio pis to be used for chipselects. - num-cs : The number of chipselects. If omitted, this will default to 4. +- reg-io-width : The I/O register width (in bytes) implemented by this + device. Supported values are 2 or 4 (the default). Child nodes as per the generic SPI binding. diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-ath79.txt b/kernel/Documentation/devicetree/bindings/spi/spi-ath79.txt new file mode 100644 index 000000000..9c696fa66 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/spi/spi-ath79.txt @@ -0,0 +1,24 @@ +Binding for Qualcomm Atheros AR7xxx/AR9xxx SPI controller + +Required properties: +- compatible: has to be "qca,<soc-type>-spi", "qca,ar7100-spi" as fallback. +- reg: Base address and size of the controllers memory area +- clocks: phandle of the AHB clock. +- clock-names: has to be "ahb". +- #address-cells: <1>, as required by generic SPI binding. +- #size-cells: <0>, also as required by generic SPI binding. + +Child nodes as per the generic SPI binding. + +Example: + + spi@1f000000 { + compatible = "qca,ar9132-spi", "qca,ar7100-spi"; + reg = <0x1f000000 0x10>; + + clocks = <&pll 2>; + clock-names = "ahb"; + + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-davinci.txt b/kernel/Documentation/devicetree/bindings/spi/spi-davinci.txt index 12ecfe9e3..d1e914adc 100644 --- a/kernel/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/kernel/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -12,6 +12,8 @@ Required properties: - compatible: - "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family - "ti,da830-spi" for SPI used similar to that on DA8xx SoC family + - "ti,keystone-spi" for SPI used similar to that on Keystone2 SoC + family - reg: Offset and length of SPI controller register space - num-cs: Number of chip selects. This includes internal as well as GPIO chip selects. diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/kernel/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 70af78a91..fa77f874e 100644 --- a/kernel/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/kernel/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -1,7 +1,7 @@ ARM Freescale DSPI controller Required properties: -- compatible : "fsl,vf610-dspi" +- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", "fsl,ls2085a-dspi" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/kernel/Documentation/devicetree/bindings/spi/spi-img-spfi.txt index e02fbf18c..494db6012 100644 --- a/kernel/Documentation/devicetree/bindings/spi/spi-img-spfi.txt +++ b/kernel/Documentation/devicetree/bindings/spi/spi-img-spfi.txt @@ -21,6 +21,7 @@ Required properties: Optional properties: - img,supports-quad-mode: Should be set if the interface supports quad mode SPI transfers. +- spfi-max-frequency: Maximum speed supported by the spfi block. Example: diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt new file mode 100644 index 000000000..ce363c923 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -0,0 +1,58 @@ +Binding for MTK SPI controller + +Required properties: +- compatible: should be one of the following. + - mediatek,mt8173-spi: for mt8173 platforms + - mediatek,mt8135-spi: for mt8135 platforms + - mediatek,mt6589-spi: for mt6589 platforms + +- #address-cells: should be 1. + +- #size-cells: should be 0. + +- reg: Address and length of the register set for the device + +- interrupts: Should contain spi interrupt + +- clocks: phandles to input clocks. + The first should be one of the following. It's PLL. + - <&clk26m>: specify parent clock 26MHZ. + - <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ. + It's the default one. + - <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ. + - <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ. + - <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ. + The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux. + The third is <&pericfg CLK_PERI_SPI0>. It's clock gate. + +- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the + muxes clock, and "spi-clk" for the clock gate. + +Optional properties: +-cs-gpios: see spi-bus.txt, only required for MT8173. + +- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi + controller used. This is a array, the element value should be 0~3, + only required for MT8173. + 0: specify GPIO69,70,71,72 for spi pins. + 1: specify GPIO102,103,104,105 for spi pins. + 2: specify GPIO128,129,130,131 for spi pins. + 3: specify GPIO5,6,7,8 for spi pins. + +Example: + +- SoC Specific Portion: +spi: spi@1100a000 { + compatible = "mediatek,mt8173-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>; + mediatek,pad-select = <1>, <0>; + status = "disabled"; +}; diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-orion.txt b/kernel/Documentation/devicetree/bindings/spi/spi-orion.txt index 50c3a3de6..98bc69815 100644 --- a/kernel/Documentation/devicetree/bindings/spi/spi-orion.txt +++ b/kernel/Documentation/devicetree/bindings/spi/spi-orion.txt @@ -1,7 +1,13 @@ Marvell Orion SPI device Required properties: -- compatible : should be "marvell,orion-spi" or "marvell,armada-370-spi". +- compatible : should be on of the following: + - "marvell,orion-spi" for the Orion, mv78x00, Kirkwood and Dove SoCs + - "marvell,armada-370-spi", for the Armada 370 SoCs + - "marvell,armada-375-spi", for the Armada 375 SoCs + - "marvell,armada-380-spi", for the Armada 38x SoCs + - "marvell,armada-390-spi", for the Armada 39x SoCs + - "marvell,armada-xp-spi", for the Armada XP SoCs - reg : offset and length of the register set for the device - cell-index : Which of multiple SPI controllers is this. Optional properties: diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-sirf.txt b/kernel/Documentation/devicetree/bindings/spi/spi-sirf.txt index 4c7adb8f7..ddd78ff68 100644 --- a/kernel/Documentation/devicetree/bindings/spi/spi-sirf.txt +++ b/kernel/Documentation/devicetree/bindings/spi/spi-sirf.txt @@ -1,7 +1,8 @@ * CSR SiRFprimaII Serial Peripheral Interface Required properties: -- compatible : Should be "sirf,prima2-spi" +- compatible : Should be "sirf,prima2-spi", "sirf,prima2-usp" + or "sirf,atlas7-usp" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI interrupt - resets: phandle to the reset controller asserting this device in diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-xlp.txt b/kernel/Documentation/devicetree/bindings/spi/spi-xlp.txt new file mode 100644 index 000000000..40e82d51e --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/spi/spi-xlp.txt @@ -0,0 +1,39 @@ +SPI Master controller for Netlogic XLP MIPS64 SOCs +================================================== + +Currently this SPI controller driver is supported for the following +Netlogic XLP SoCs: + XLP832, XLP316, XLP208, XLP980, XLP532 + +Required properties: +- compatible : Should be "netlogic,xlp832-spi". +- #address-cells : Number of cells required to define a chip select address + on the SPI bus. +- #size-cells : Should be zero. +- reg : Should contain register location and length. +- clocks : Phandle of the spi clock +- interrupts : Interrupt number used by this controller. +- interrupt-parent : Phandle of the parent interrupt controller. + +SPI slave nodes must be children of the SPI master node and can contain +properties described in Documentation/devicetree/bindings/spi/spi-bus.txt. + +Example: + + spi: xlp_spi@3a100 { + compatible = "netlogic,xlp832-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x3a100 0x100>; + clocks = <&spi_clk>; + interrupts = <34>; + interrupt-parent = <&pic>; + + spi_nor@1 { + compatible = "spansion,s25sl12801"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; /* Chip Select */ + spi-max-frequency = <40000000>; + }; +}; diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt b/kernel/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt new file mode 100644 index 000000000..c8f50e5cf --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt @@ -0,0 +1,26 @@ +Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings +------------------------------------------------------------------- + +Required properties: +- compatible : Should be "xlnx,zynqmp-qspi-1.0". +- reg : Physical base address and size of GQSPI registers map. +- interrupts : Property with a value describing the interrupt + number. +- interrupt-parent : Must be core interrupt controller. +- clock-names : List of input clock names - "ref_clk", "pclk" + (See clock bindings for details). +- clocks : Clock phandles (see clock bindings for details). + +Optional properties: +- num-cs : Number of chip selects used. + +Example: + qspi: spi@ff0f0000 { + compatible = "xlnx,zynqmp-qspi-1.0"; + clock-names = "ref_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + interrupts = <0 15 4>; + interrupt-parent = <&gic>; + num-cs = <1>; + reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>; + }; diff --git a/kernel/Documentation/devicetree/bindings/spi/spi_atmel.txt b/kernel/Documentation/devicetree/bindings/spi/spi_atmel.txt index 4f8184d06..fb588b3e6 100644 --- a/kernel/Documentation/devicetree/bindings/spi/spi_atmel.txt +++ b/kernel/Documentation/devicetree/bindings/spi/spi_atmel.txt @@ -4,11 +4,16 @@ Required properties: - compatible : should be "atmel,at91rm9200-spi". - reg: Address and length of the register set for the device - interrupts: Should contain spi interrupt -- cs-gpios: chipselects +- cs-gpios: chipselects (optional for SPI controller version >= 2 with the + Chip Select Active After Transfer feature). - clock-names: tuple listing input clock names. Required elements: "spi_clk" - clocks: phandles to input clocks. +Optional properties: +- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO + capable SPI controllers. + Example: spi1: spi@fffcc000 { @@ -20,6 +25,7 @@ spi1: spi@fffcc000 { clocks = <&spi1_clk>; clock-names = "spi_clk"; cs-gpios = <&pioB 3 0>; + atmel,fifo-size = <32>; status = "okay"; mmc-slot@0 { diff --git a/kernel/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/kernel/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt index 307537787..555fb117d 100644 --- a/kernel/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt +++ b/kernel/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt @@ -1,4 +1,4 @@ -* Freescale i.MX28 LRADC device driver +* Freescale MXS LRADC device driver Required properties: - compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc" diff --git a/kernel/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/kernel/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt new file mode 100644 index 000000000..d48fc5280 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt @@ -0,0 +1,23 @@ +* Temperature Sensor on hisilicon SoCs + +** Required properties : + +- compatible: "hisilicon,tsensor". +- reg: physical base address of thermal sensor and length of memory mapped + region. +- interrupt: The interrupt number to the cpu. Defines the interrupt used + by /SOCTHERM/tsensor. +- clock-names: Input clock name, should be 'thermal_clk'. +- clocks: phandles for clock specified in "clock-names" property. +- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description. + +Example : + + tsensor: tsensor@0,f7030700 { + compatible = "hisilicon,tsensor"; + reg = <0x0 0xf7030700 0x0 0x1000>; + interrupts = <0 7 0x4>; + clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; + clock-names = "thermal_clk"; + #thermal-sensor-cells = <1>; + } diff --git a/kernel/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/kernel/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt new file mode 100644 index 000000000..290ec06fa --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt @@ -0,0 +1,57 @@ +Qualcomm QPNP PMIC Temperature Alarm + +QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips +that utilize the Qualcomm SPMI implementation. These peripherals provide an +interrupt signal and status register to identify high PMIC die temperature. + +Required properties: +- compatible: Should contain "qcom,spmi-temp-alarm". +- reg: Specifies the SPMI address and length of the controller's + registers. +- interrupts: PMIC temperature alarm interrupt. +- #thermal-sensor-cells: Should be 0. See thermal.txt for a description. + +Optional properties: +- io-channels: Should contain IIO channel specifier for the ADC channel, + which report chip die temperature. +- io-channel-names: Should contain "thermal". + +Example: + + pm8941_temp: thermal-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + + io-channels = <&pm8941_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + }; + + thermal-zones { + pm8941 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&pm8941_temp>; + + trips { + passive { + temperature = <1050000>; + hysteresis = <2000>; + type = "passive"; + }; + alert { + temperature = <125000>; + hysteresis = <2000>; + type = "hot"; + }; + crit { + temperature = <145000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + diff --git a/kernel/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/kernel/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index ef802de49..0dfa60d88 100644 --- a/kernel/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/kernel/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -1,7 +1,9 @@ * Temperature Sensor ADC (TSADC) on rockchip SoCs Required properties: -- compatible : "rockchip,rk3288-tsadc" +- compatible : should be "rockchip,<name>-tsadc" + "rockchip,rk3288-tsadc": found on RK3288 SoCs + "rockchip,rk3368-tsadc": found on RK3368 SoCs - reg : physical base address of the controller and length of memory mapped region. - interrupts : The interrupt number to the cpu. The interrupt specifier format @@ -12,6 +14,11 @@ Required properties: - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the name "tsadc-apb". +- pinctrl-names : The pin control state names; +- pinctrl-0 : The "init" pinctrl state, it will be set before device probe. +- pinctrl-1 : The "default" pinctrl state, it will be set after reset the + TSADC controller. +- pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend. - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. - rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value. - rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO. @@ -27,8 +34,10 @@ tsadc: tsadc@ff280000 { clock-names = "tsadc", "apb_pclk"; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; - pinctrl-names = "default"; - pinctrl-0 = <&otp_out>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; rockchip,hw-tshut-mode = <0>; diff --git a/kernel/Documentation/devicetree/bindings/thermal/thermal.txt b/kernel/Documentation/devicetree/bindings/thermal/thermal.txt index 29fe0bfae..41b817f7b 100644 --- a/kernel/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/kernel/Documentation/devicetree/bindings/thermal/thermal.txt @@ -55,19 +55,11 @@ of heat dissipation). For example a fan's cooling states correspond to the different fan speeds possible. Cooling states are referred to by single unsigned integers, where larger numbers mean greater heat dissipation. The precise set of cooling states associated with a device -(as referred to be the cooling-min-state and cooling-max-state +(as referred to by the cooling-min-level and cooling-max-level properties) should be defined in a particular device's binding. For more examples of cooling devices, refer to the example sections below. Required properties: -- cooling-min-state: An integer indicating the smallest - Type: unsigned cooling state accepted. Typically 0. - Size: one cell - -- cooling-max-state: An integer indicating the largest - Type: unsigned cooling state accepted. - Size: one cell - - #cooling-cells: Used to provide cooling device specific information Type: unsigned while referring to it. Must be at least 2, in order Size: one cell to specify minimum and maximum cooling state used @@ -77,6 +69,15 @@ Required properties: See Cooling device maps section below for more details on how consumers refer to cooling devices. +Optional properties: +- cooling-min-level: An integer indicating the smallest + Type: unsigned cooling state accepted. Typically 0. + Size: one cell + +- cooling-max-level: An integer indicating the largest + Type: unsigned cooling state accepted. + Size: one cell + * Trip points The trip node is a node to describe a point in the temperature domain @@ -167,6 +168,13 @@ Optional property: by means of sensor ID. Additional coefficients are interpreted as constant offset. +- sustainable-power: An estimate of the sustainable power (in mW) that the + Type: unsigned thermal zone can dissipate at the desired + Size: one cell control temperature. For reference, the + sustainable power of a 4'' phone is typically + 2000mW, while on a 10'' tablet is around + 4500mW. + Note: The delay properties are bound to the maximum dT/dt (temperature derivative over time) in two situations for a thermal zone: (i) - when passive cooling is activated (polling-delay-passive); and @@ -218,8 +226,8 @@ cpus { 396000 950000 198000 850000 >; - cooling-min-state = <0>; - cooling-max-state = <3>; + cooling-min-level = <0>; + cooling-max-level = <3>; #cooling-cells = <2>; /* min followed by max */ }; ... @@ -233,8 +241,8 @@ cpus { */ fan0: fan@0x48 { ... - cooling-min-state = <0>; - cooling-max-state = <9>; + cooling-min-level = <0>; + cooling-max-level = <9>; #cooling-cells = <2>; /* min followed by max */ }; }; @@ -546,6 +554,8 @@ thermal-zones { */ coefficients = <1200 -345 890>; + sustainable-power = <2500>; + trips { /* Trips are based on resulting linear equation */ cpu_trip: cpu-trip { diff --git a/kernel/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt b/kernel/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt index 0c9222d27..6299dd8de 100644 --- a/kernel/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt +++ b/kernel/Documentation/devicetree/bindings/thermal/ti_soc_thermal.txt @@ -10,6 +10,8 @@ to the silicon temperature. Required properties: - compatible : Should be: + - "ti,omap34xx-bandgap" : for OMAP34xx bandgap + - "ti,omap36xx-bandgap" : for OMAP36xx bandgap - "ti,omap4430-bandgap" : for OMAP4430 bandgap - "ti,omap4460-bandgap" : for OMAP4460 bandgap - "ti,omap4470-bandgap" : for OMAP4470 bandgap @@ -25,6 +27,18 @@ to each bandgap version, because the mapping may change from soc to soc, apart of depending on available features. Example: +OMAP34xx: +bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap34xx-bandgap"; +}; + +OMAP36xx: +bandgap { + reg = <0x48002524 0x4>; + compatible = "ti,omap36xx-bandgap"; +}; + OMAP4430: bandgap { reg = <0x4a002260 0x4 0x4a00232C 0x4>; diff --git a/kernel/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/kernel/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt index 993695c65..eeee6cd51 100644 --- a/kernel/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt +++ b/kernel/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt @@ -6,6 +6,9 @@ Required properties: - interrupts : A list of 3 interrupts; one per timer channel. - clocks: phandle to the source clock +Optional properties: +- timer-width: Bit width of the timer, necessary if not 16. + Example: ttc0: ttc0@f8001000 { @@ -14,4 +17,5 @@ ttc0: ttc0@f8001000 { compatible = "cdns,ttc"; reg = <0xF8001000 0x1000>; clocks = <&cpu_clk 3>; + timer-width = <32>; }; diff --git a/kernel/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt b/kernel/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt new file mode 100644 index 000000000..7afce80bf --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/timer/img,pistachio-gptimer.txt @@ -0,0 +1,28 @@ +* Pistachio general-purpose timer based clocksource + +Required properties: + - compatible: "img,pistachio-gptimer". + - reg: Address range of the timer registers. + - interrupts: An interrupt for each of the four timers + - clocks: Should contain a clock specifier for each entry in clock-names + - clock-names: Should contain the following entries: + "sys", interface clock + "slow", slow counter clock + "fast", fast counter clock + - img,cr-periph: Must contain a phandle to the peripheral control + syscon node. + +Example: + timer: timer@18102000 { + compatible = "img,pistachio-gptimer"; + reg = <0x18102000 0x100>; + interrupts = <GIC_SHARED 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SHARED 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_periph PERIPH_CLK_COUNTER_FAST>, + <&clk_periph PERIPH_CLK_COUNTER_SLOW>, + <&cr_periph SYS_CLK_TIMER>; + clock-names = "fast", "slow", "sys"; + img,cr-periph = <&cr_periph>; + }; diff --git a/kernel/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/kernel/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt index 7c4408ff4..64083bc56 100644 --- a/kernel/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt +++ b/kernel/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -2,7 +2,13 @@ Mediatek MT6577, MT6572 and MT6589 Timers --------------------------------------- Required properties: -- compatible: Should be "mediatek,mt6577-timer" +- compatible should contain: + * "mediatek,mt6580-timer" for MT6580 compatible timers + * "mediatek,mt6589-timer" for MT6589 compatible timers + * "mediatek,mt8127-timer" for MT8127 compatible timers + * "mediatek,mt8135-timer" for MT8135 compatible timers + * "mediatek,mt8173-timer" for MT8173 compatible timers + * "mediatek,mt6577-timer" for MT6577 and all above compatible timers - reg: Should contain location and length for timers register. - clocks: Clocks driving the timer hardware. This list should include two clocks. The order is system clock and as second clock the RTC clock. diff --git a/kernel/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt b/kernel/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt new file mode 100644 index 000000000..51b05a0e7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt @@ -0,0 +1,26 @@ +* NXP LPC3220 timer + +The NXP LPC3220 timer is used on a wide range of NXP SoCs. This +includes LPC32xx, LPC178x, LPC18xx and LPC43xx parts. + +Required properties: +- compatible: + Should be "nxp,lpc3220-timer". +- reg: + Address and length of the register set. +- interrupts: + Reference to the timer interrupt +- clocks: + Should contain a reference to timer clock. +- clock-names: + Should contain "timerclk". + +Example: + +timer1: timer@40085000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40085000 0x1000>; + interrupts = <13>; + clocks = <&ccu1 CLK_CPU_TIMER1>; + clock-names = "timerclk"; +}; diff --git a/kernel/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt b/kernel/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt new file mode 100644 index 000000000..e8792447a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/timer/renesas,16bit-timer.txt @@ -0,0 +1,25 @@ +* Renesas H8/300 16bit timer + +The 16bit timer is a 16bit timer/counter with configurable clock inputs and +programmable compare match. + +Required Properties: + + - compatible: must contain "renesas,16bit-timer" + - reg: base address and length of the registers block for the timer module. + - interrupts: interrupt-specifier for the timer, IMIA + - clocks: a list of phandle, one for each entry in clock-names. + - clock-names: must contain "peripheral_clk" for the functional clock. + - renesas,channel: timer channel number. + +Example: + + timer16: timer@ffff68 { + compatible = "reneas,16bit-timer"; + reg = <0xffff68 8>, <0xffff60 8>; + interrupts = <24>; + renesas,channel = <0>; + clocks = <&pclk>; + clock-names = "peripheral_clk"; + }; + diff --git a/kernel/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt b/kernel/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt new file mode 100644 index 000000000..9dca3759a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/timer/renesas,8bit-timer.txt @@ -0,0 +1,25 @@ +* Renesas H8/300 8bit timer + +The 8bit timer is a 8bit timer/counter with configurable clock inputs and +programmable compare match. + +This implement only supported cascade mode. + +Required Properties: + + - compatible: must contain "renesas,8bit-timer" + - reg: base address and length of the registers block for the timer module. + - interrupts: interrupt-specifier for the timer, CMIA and TOVI + - clocks: a list of phandle, one for each entry in clock-names. + - clock-names: must contain "fck" for the functional clock. + +Example: + + timer8_0: timer@ffff80 { + compatible = "renesas,8bit-timer"; + reg = <0xffff80 10>; + interrupts = <36>; + clocks = <&fclk>; + clock-names = "fck"; + }; + diff --git a/kernel/Documentation/devicetree/bindings/timer/renesas,tpu.txt b/kernel/Documentation/devicetree/bindings/timer/renesas,tpu.txt new file mode 100644 index 000000000..f8b25897f --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/timer/renesas,tpu.txt @@ -0,0 +1,21 @@ +* Renesas H8/300 Timer Pluse Unit + +The TPU is a 16bit timer/counter with configurable clock inputs and +programmable compare match. +This implementation support only cascade mode. + +Required Properties: + + - compatible: must contain "renesas,tpu" + - reg: base address and length of the registers block in 2 channel. + - clocks: a list of phandle, one for each entry in clock-names. + - clock-names: must contain "peripheral_clk" for the functional clock. + + +Example: + tpu: tpu@ffffe0 { + compatible = "renesas,tpu"; + reg = <0xffffe0 16>, <0xfffff0 12>; + clocks = <&pclk>; + clock-names = "peripheral_clk"; + }; diff --git a/kernel/Documentation/devicetree/bindings/timer/st,stih407-lpc b/kernel/Documentation/devicetree/bindings/timer/st,stih407-lpc new file mode 100644 index 000000000..72acb487b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/timer/st,stih407-lpc @@ -0,0 +1,28 @@ +STMicroelectronics Low Power Controller (LPC) - Clocksource +=========================================================== + +LPC currently supports Watchdog OR Real Time Clock OR Clocksource +functionality. + +[See: ../watchdog/st_lpc_wdt.txt for Watchdog options] +[See: ../rtc/rtc-st-lpc.txt for RTC options] + +Required properties + +- compatible : Must be: "st,stih407-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of three modes: + ST_LPC_MODE_RTC [0] + ST_LPC_MODE_WDT [1] + ST_LPC_MODE_CLKSRC [2] + One (and only one) mode must be selected. + +Example: + lpc@fde05000 { + compatible = "st,stih407-lpc"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,lpc-mode = <ST_LPC_MODE_CLKSRC>; + }; diff --git a/kernel/Documentation/devicetree/bindings/timer/st,stm32-timer.txt b/kernel/Documentation/devicetree/bindings/timer/st,stm32-timer.txt new file mode 100644 index 000000000..8ef28e70d --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/timer/st,stm32-timer.txt @@ -0,0 +1,22 @@ +. STMicroelectronics STM32 timer + +The STM32 MCUs family has several general-purpose 16 and 32 bits timers. + +Required properties: +- compatible : Should be "st,stm32-timer" +- reg : Address and length of the register set +- clocks : Reference on the timer input clock +- interrupts : Reference to the timer interrupt + +Optional properties: +- resets: Reference to a reset controller asserting the timer + +Example: + +timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + resets = <&rrc 259>; + clocks = <&clk_pmtr1>; +}; diff --git a/kernel/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/kernel/Documentation/devicetree/bindings/ufs/ufs-qcom.txt new file mode 100644 index 000000000..070baf4d7 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/ufs/ufs-qcom.txt @@ -0,0 +1,58 @@ +* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY + +UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro. +Each UFS PHY node should have its own node. + +To bind UFS PHY with UFS host controller, the controller node should +contain a phandle reference to UFS PHY node. + +Required properties: +- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm" + or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use. +- reg : should contain PHY register address space (mandatory), +- reg-names : indicates various resources passed to driver (via reg proptery) by name. + Required "reg-names" is "phy_mem". +- #phy-cells : This property shall be set to 0 +- vdda-phy-supply : phandle to main PHY supply for analog domain +- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply +- clocks : List of phandle and clock specifier pairs +- clock-names : List of clock input name strings sorted in the same + order as the clocks property. "ref_clk_src", "ref_clk", + "tx_iface_clk" & "rx_iface_clk" are mandatory but + "ref_clk_parent" is optional + +Optional properties: +- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply +- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply +- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply +- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply +- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on + +Example: + + ufsphy1: ufsphy@0xfc597000 { + compatible = "qcom,ufs-phy-qmp-20nm"; + reg = <0xfc597000 0x800>; + reg-names = "phy_mem"; + #phy-cells = <0>; + vdda-phy-supply = <&pma8084_l4>; + vdda-pll-supply = <&pma8084_l12>; + vdda-phy-max-microamp = <50000>; + vdda-pll-max-microamp = <1000>; + clock-names = "ref_clk_src", + "ref_clk_parent", + "ref_clk", + "tx_iface_clk", + "rx_iface_clk"; + clocks = <&clock_rpm clk_ln_bb_clk>, + <&clock_gcc clk_pcie_1_phy_ldo >, + <&clock_gcc clk_ufs_phy_ldo>, + <&clock_gcc clk_gcc_ufs_tx_cfg_clk>, + <&clock_gcc clk_gcc_ufs_rx_cfg_clk>; + }; + + ufshc@0xfc598000 { + ... + phys = <&ufsphy1>; + phy-names = "ufsphy"; + }; diff --git a/kernel/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/kernel/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt index 53579197e..03c0e989e 100644 --- a/kernel/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +++ b/kernel/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt @@ -4,11 +4,18 @@ UFSHC nodes are defined to describe on-chip UFS host controllers. Each UFS controller instance should have its own node. Required properties: -- compatible : compatible list, contains "jedec,ufs-1.1" +- compatible : must contain "jedec,ufs-1.1", may also list one or more + of the following: + "qcom,msm8994-ufshc" + "qcom,msm8996-ufshc" + "qcom,ufshc" - interrupts : <interrupt mapping for UFS host controller IRQ> - reg : <registers mapping> Optional properties: +- phys : phandle to UFS PHY node +- phy-names : the string "ufsphy" when is found in a node, along + with "phys" attribute, provides phandle to UFS PHY node - vdd-hba-supply : phandle to UFS host controller supply regulator node - vcc-supply : phandle to VCC supply regulator node - vccq-supply : phandle to VCCQ supply regulator node @@ -54,4 +61,6 @@ Example: clocks = <&core 0>, <&ref 0>, <&iface 0>; clock-names = "core_clk", "ref_clk", "iface_clk"; freq-table-hz = <100000000 200000000>, <0 0>, <0 0>; + phys = <&ufsphy1>; + phy-names = "ufsphy"; }; diff --git a/kernel/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/kernel/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt new file mode 100644 index 000000000..862cd7c79 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -0,0 +1,29 @@ +Allwinner sun4i A10 musb DRC/OTG controller +------------------------------------------- + +Required properties: + - compatible : "allwinner,sun4i-a10-musb", "allwinner,sun6i-a31-musb" + or "allwinner,sun8i-a33-musb" + - reg : mmio address range of the musb controller + - clocks : clock specifier for the musb controller ahb gate clock + - reset : reset specifier for the ahb reset (A31 and newer only) + - interrupts : interrupt to which the musb controller is connected + - interrupt-names : must be "mc" + - phys : phy specifier for the otg phy + - phy-names : must be "usb" + - dr_mode : Dual-Role mode must be "host" or "otg" + - extcon : extcon specifier for the otg phy + +Example: + + usb_otg: usb@01c13000 { + compatible = "allwinner,sun4i-a10-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ahb_gates 0>; + interrupts = <38>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; diff --git a/kernel/Documentation/devicetree/bindings/usb/atmel-usb.txt b/kernel/Documentation/devicetree/bindings/usb/atmel-usb.txt index de773a00e..5883b73ea 100644 --- a/kernel/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/kernel/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -5,6 +5,13 @@ OHCI Required properties: - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers used in host mode. + - reg: Address and length of the register set for the device + - interrupts: Should contain ehci interrupt + - clocks: Should reference the peripheral, host and system clocks + - clock-names: Should contains two strings + "ohci_clk" for the peripheral clock + "hclk" for the host clock + "uhpck" for the system clock - num-ports: Number of ports. - atmel,vbus-gpio: If present, specifies a gpio that needs to be activated for the bus to be powered. @@ -14,6 +21,8 @@ Required properties: usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; interrupts = <20 4>; num-ports = <2>; }; @@ -23,11 +32,19 @@ EHCI Required properties: - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers used in host mode. + - reg: Address and length of the register set for the device + - interrupts: Should contain ehci interrupt + - clocks: Should reference the peripheral and the UTMI clocks + - clock-names: Should contains two strings + "ehci_clk" for the peripheral clock + "usb_clk" for the UTMI clock usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 4>; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; }; AT91 USB device controller @@ -53,6 +70,8 @@ usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 4>; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; atmel,vbus-gpio = <&pioC 5 0>; }; @@ -65,6 +84,10 @@ Required properties: "atmel,sama5d3-udc" - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt + - clocks: Should reference the peripheral and host clocks + - clock-names: Should contains two strings + "pclk" for the peripheral clock + "hclk" for the host clock - ep childnode: To specify the number of endpoints and their properties. Optional properties: @@ -86,6 +109,8 @@ usb2: gadget@fff78000 { reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 4 0>; + clocks = <&utmi>, <&udphs_clk>; + clock-names = "hclk", "pclk"; atmel,vbus-gpio = <&pioB 19 0>; ep0 { diff --git a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt deleted file mode 100644 index 38a548001..000000000 --- a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt +++ /dev/null @@ -1,35 +0,0 @@ -* Freescale i.MX ci13xxx usb controllers - -Required properties: -- compatible: Should be "fsl,imx27-usb" -- reg: Should contain registers location and length -- interrupts: Should contain controller interrupt -- fsl,usbphy: phandle of usb phy that connects to the port - -Recommended properies: -- phy_type: the type of the phy connected to the core. Should be one - of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this - property the PORTSC register won't be touched -- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" - -Optional properties: -- fsl,usbmisc: phandler of non-core register device, with one argument - that indicate usb controller index -- vbus-supply: regulator for vbus -- disable-over-current: disable over current detect -- external-vbus-divider: enables off-chip resistor divider for Vbus -- maximum-speed: limit the maximum connection speed to "full-speed". -- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts - -Examples: -usb@02184000 { /* USB OTG */ - compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; - reg = <0x02184000 0x200>; - interrupts = <0 43 0x04>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc 0>; - disable-over-current; - external-vbus-divider; - maximum-speed = "full-speed"; - tpl-support; -}; diff --git a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt deleted file mode 100644 index f2899b550..000000000 --- a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt +++ /dev/null @@ -1,17 +0,0 @@ -Qualcomm CI13xxx (Chipidea) USB controllers - -Required properties: -- compatible: should contain "qcom,ci-hdrc" -- reg: offset and length of the register set in the memory map -- interrupts: interrupt-specifier for the controller interrupt. -- usb-phy: phandle for the PHY device -- dr_mode: Should be "peripheral" - -Examples: - gadget@f9a55000 { - compatible = "qcom,ci-hdrc"; - reg = <0xf9a55000 0x400>; - dr_mode = "peripheral"; - interrupts = <0 134 0>; - usb-phy = <&usbphy0>; - }; diff --git a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt index 27f8b1e5e..781296bfb 100644 --- a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +++ b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt @@ -1,15 +1,64 @@ * USB2 ChipIdea USB controller for ci13xxx Required properties: -- compatible: should be "chipidea,usb2" +- compatible: should be one of: + "fsl,imx27-usb" + "lsi,zevio-usb" + "qcom,ci-hdrc" + "chipidea,usb2" + "xlnx,zynq-usb-2.20a" - reg: base address and length of the registers - interrupts: interrupt for the USB controller +Recommended properies: +- phy_type: the type of the phy connected to the core. Should be one + of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this + property the PORTSC register won't be touched. +- dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" + +Deprecated properties: +- usb-phy: phandle for the PHY device. Use "phys" instead. +- fsl,usbphy: phandle of usb phy that connects to the port. Use "phys" instead. + Optional properties: - clocks: reference to the USB clock - phys: reference to the USB PHY - phy-names: should be "usb-phy" - vbus-supply: reference to the VBUS regulator +- maximum-speed: limit the maximum connection speed to "full-speed". +- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts +- itc-setting: interrupt threshold control register control, the setting + should be aligned with ITC bits at register USBCMD. +- ahb-burst-config: it is vendor dependent, the required value should be + aligned with AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This + property is used to change AHB burst configuration, check the chipidea + spec for meaning of each value. If this property is not existed, it + will use the reset value. +- tx-burst-size-dword: it is vendor dependent, the tx burst size in dword + (4 bytes), This register represents the maximum length of a the burst + in 32-bit words while moving data from system memory to the USB + bus, the value of this property will only take effect if property + "ahb-burst-config" is set to 0, if this property is missing the reset + default of the hardware implementation will be used. +- rx-burst-size-dword: it is vendor dependent, the rx burst size in dword + (4 bytes), This register represents the maximum length of a the burst + in 32-bit words while moving data from the USB bus to system memory, + the value of this property will only take effect if property + "ahb-burst-config" is set to 0, if this property is missing the reset + default of the hardware implementation will be used. +- extcon: phandles to external connector devices. First phandle should point to + external connector, which provide "USB" cable events, the second should point + to external connector device, which provide "USB-HOST" cable events. If one + of the external connector devices is not required, empty <0> phandle should + be specified. +- phy-clkgate-delay-us: the delay time (us) between putting the PHY into + low power mode and gating the PHY clock. + +i.mx specific properties +- fsl,usbmisc: phandler of non-core register device, with one + argument that indicate usb controller index +- disable-over-current: disable over current detect +- external-vbus-divider: enables off-chip resistor divider for Vbus Example: @@ -21,4 +70,11 @@ Example: phys = <&usb_phy0>; phy-names = "usb-phy"; vbus-supply = <®_usb0_vbus>; + gadget-itc-setting = <0x4>; /* 4 micro-frames */ + /* Incremental burst of unspecified length */ + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; /* 64 bytes */ + rx-burst-size-dword = <0x10>; + extcon = <0>, <&usb_id>; + phy-clkgate-delay-us = <400>; }; diff --git a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt b/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt deleted file mode 100644 index abbcb2aea..000000000 --- a/kernel/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt +++ /dev/null @@ -1,17 +0,0 @@ -* LSI Zevio USB OTG Controller - -Required properties: -- compatible: Should be "lsi,zevio-usb" -- reg: Should contain registers location and length -- interrupts: Should contain controller interrupt - -Optional properties: -- vbus-supply: regulator for vbus - -Examples: - usb0: usb@b0000000 { - reg = <0xb0000000 0x1000>; - compatible = "lsi,zevio-usb"; - interrupts = <8>; - vbus-supply = <&vbus_reg>; - }; diff --git a/kernel/Documentation/devicetree/bindings/usb/dwc3-st.txt b/kernel/Documentation/devicetree/bindings/usb/dwc3-st.txt index f9d70252b..01c71b125 100644 --- a/kernel/Documentation/devicetree/bindings/usb/dwc3-st.txt +++ b/kernel/Documentation/devicetree/bindings/usb/dwc3-st.txt @@ -49,8 +49,7 @@ st_dwc3: dwc3@8f94000 { st,syscfg = <&syscfg_core>; resets = <&powerdown STIH407_USB3_POWERDOWN>, <&softreset STIH407_MIPHY2_SOFTRESET>; - reset-names = "powerdown", - "softreset"; + reset-names = "powerdown", "softreset"; #address-cells = <1>; #size-cells = <1>; pinctrl-names = "default"; @@ -62,7 +61,7 @@ st_dwc3: dwc3@8f94000 { reg = <0x09900000 0x100000>; interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; dr_mode = "host"; - phys-names = "usb2-phy", "usb3-phy"; - phys = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>; }; }; diff --git a/kernel/Documentation/devicetree/bindings/usb/dwc3.txt b/kernel/Documentation/devicetree/bindings/usb/dwc3.txt index 5cc364309..fb2ad0ace 100644 --- a/kernel/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/kernel/Documentation/devicetree/bindings/usb/dwc3.txt @@ -1,6 +1,7 @@ synopsys DWC3 CORE -DWC3- USB3 CONTROLLER +DWC3- USB3 CONTROLLER. Complies to the generic USB binding properties + as described in 'usb/generic.txt' Required properties: - compatible: must be "snps,dwc3" @@ -35,9 +36,16 @@ Optional properties: LTSSM during USB3 Compliance mode. - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy. - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy. + - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG, + disabling the suspend signal to the PHY. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal utmi_l1_suspend_n, false when asserts utmi_sleep_n - snps,hird-threshold: HIRD threshold + - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for + UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3. + - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ + register for post-silicon frame length adjustment when the + fladj_30mhz_sdbnd signal is invalid or incorrect. This is usually a subnode to DWC3 glue to which it is connected. diff --git a/kernel/Documentation/devicetree/bindings/usb/generic.txt b/kernel/Documentation/devicetree/bindings/usb/generic.txt index 477d5bb5e..bba825711 100644 --- a/kernel/Documentation/devicetree/bindings/usb/generic.txt +++ b/kernel/Documentation/devicetree/bindings/usb/generic.txt @@ -11,6 +11,19 @@ Optional properties: "peripheral" and "otg". In case this attribute isn't passed via DT, USB DRD controllers should default to OTG. + - otg-rev: tells usb driver the release number of the OTG and EH supplement + with which the device and its descriptors are compliant, + in binary-coded decimal (i.e. 2.0 is 0200H). This + property is used if any real OTG features(HNP/SRP/ADP) + is enabled, if ADP is required, otg-rev should be + 0x0200 or above. + - hnp-disable: tells OTG controllers we want to disable OTG HNP, normally HNP + is the basic function of real OTG except you want it + to be a srp-capable only B device. + - srp-disable: tells OTG controllers we want to disable OTG SRP, SRP is + optional for OTG device. + - adp-disable: tells OTG controllers we want to disable OTG ADP, ADP is + optional for OTG device. This is an attribute to a USB controller such as: @@ -21,4 +34,6 @@ dwc3@4a030000 { usb-phy = <&usb2_phy>, <&usb3,phy>; maximum-speed = "super-speed"; dr_mode = "otg"; + otg-rev = <0x0200>; + adp-disable; }; diff --git a/kernel/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/kernel/Documentation/devicetree/bindings/usb/msm-hsusb.txt index 2826f2af5..8654a3ec2 100644 --- a/kernel/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/kernel/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -52,6 +52,10 @@ Required properties: Optional properties: - dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" +- switch-gpio: A phandle + gpio-specifier pair. Some boards are using Dual + SPDT USB Switch, witch is cotrolled by GPIO to de/multiplex + D+/D- USB lines between connectors. + - qcom,phy-init-sequence: PHY configuration sequence values. This is related to Device Mode Eye Diagram test. Start address at which these values will be written is ULPI_EXT_VENDOR_SPECIFIC. Value of -1 is reserved as @@ -69,6 +73,17 @@ Optional properties: (no, min, max) where each value represents either a voltage in microvolts or a value corresponding to voltage corner. +- qcom,manual-pullup: If present, vbus is not routed to USB controller/phy + and controller driver therefore enables pull-up explicitly + before starting controller using usbcmd run/stop bit. + +- extcon: phandles to external connector devices. First phandle + should point to external connector, which provide "USB" + cable events, the second should point to external connector + device, which provide "USB-HOST" cable events. If one of + the external connector devices is not required empty <0> + phandle should be specified. + Example HSUSB OTG controller device node: usb@f9a55000 { diff --git a/kernel/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/kernel/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index ddbe304be..7d48f63db 100644 --- a/kernel/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/kernel/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -4,6 +4,8 @@ Required properties: - compatible: Must contain one of the following: - "renesas,usbhs-r8a7790" - "renesas,usbhs-r8a7791" + - "renesas,usbhs-r8a7794" + - "renesas,usbhs-r8a7795" - reg: Base address and length of the register for the USBHS - interrupts: Interrupt specifier for the USBHS - clocks: A list of phandle + clock specifier pairs diff --git a/kernel/Documentation/devicetree/bindings/usb/samsung-usbphy.txt b/kernel/Documentation/devicetree/bindings/usb/samsung-usbphy.txt deleted file mode 100644 index 33fd3543f..000000000 --- a/kernel/Documentation/devicetree/bindings/usb/samsung-usbphy.txt +++ /dev/null @@ -1,117 +0,0 @@ -SAMSUNG USB-PHY controllers - -** Samsung's usb 2.0 phy transceiver - -The Samsung's usb 2.0 phy transceiver is used for controlling -usb 2.0 phy for s3c-hsotg as well as ehci-s5p and ohci-exynos -usb controllers across Samsung SOCs. -TODO: Adding the PHY binding with controller(s) according to the under -development generic PHY driver. - -Required properties: - -Exynos4210: -- compatible : should be "samsung,exynos4210-usb2phy" -- reg : base physical address of the phy registers and length of memory mapped - region. -- clocks: Clock IDs array as required by the controller. -- clock-names: names of clock correseponding IDs clock property as requested - by the controller driver. - -Exynos5250: -- compatible : should be "samsung,exynos5250-usb2phy" -- reg : base physical address of the phy registers and length of memory mapped - region. - -Optional properties: -- #address-cells: should be '1' when usbphy node has a child node with 'reg' - property. -- #size-cells: should be '1' when usbphy node has a child node with 'reg' - property. -- ranges: allows valid translation between child's address space and parent's - address space. - -- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller - interface for usb-phy. It should provide the following information required by - usb-phy controller to control phy. - - reg : base physical address of PHY_CONTROL registers. - The size of this register is the total sum of size of all PHY_CONTROL - registers that the SoC has. For example, the size will be - '0x4' in case we have only one PHY_CONTROL register (e.g. - OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210) - and, '0x8' in case we have two PHY_CONTROL registers (e.g. - USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x). - and so on. - -Example: - - Exynos4210 - - usbphy@125B0000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "samsung,exynos4210-usb2phy"; - reg = <0x125B0000 0x100>; - ranges; - - clocks = <&clock 2>, <&clock 305>; - clock-names = "xusbxti", "otg"; - - usbphy-sys { - /* USB device and host PHY_CONTROL registers */ - reg = <0x10020704 0x8>; - }; - }; - - -** Samsung's usb 3.0 phy transceiver - -Starting exynso5250, Samsung's SoC have usb 3.0 phy transceiver -which is used for controlling usb 3.0 phy for dwc3-exynos usb 3.0 -controllers across Samsung SOCs. - -Required properties: - -Exynos5250: -- compatible : should be "samsung,exynos5250-usb3phy" -- reg : base physical address of the phy registers and length of memory mapped - region. -- clocks: Clock IDs array as required by the controller. -- clock-names: names of clocks correseponding to IDs in the clock property - as requested by the controller driver. - -Optional properties: -- #address-cells: should be '1' when usbphy node has a child node with 'reg' - property. -- #size-cells: should be '1' when usbphy node has a child node with 'reg' - property. -- ranges: allows valid translation between child's address space and parent's - address space. - -- The child node 'usbphy-sys' to the node 'usbphy' is for the system controller - interface for usb-phy. It should provide the following information required by - usb-phy controller to control phy. - - reg : base physical address of PHY_CONTROL registers. - The size of this register is the total sum of size of all PHY_CONTROL - registers that the SoC has. For example, the size will be - '0x4' in case we have only one PHY_CONTROL register (e.g. - OTHERS register in S3C64XX or USB_PHY_CONTROL register in S5PV210) - and, '0x8' in case we have two PHY_CONTROL registers (e.g. - USBDEVICE_PHY_CONTROL and USBHOST_PHY_CONTROL registers in exynos4x). - and so on. - -Example: - usbphy@12100000 { - compatible = "samsung,exynos5250-usb3phy"; - reg = <0x12100000 0x100>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&clock 1>, <&clock 286>; - clock-names = "ext_xtal", "usbdrd30"; - - usbphy-sys { - /* USB device and host PHY_CONTROL registers */ - reg = <0x10040704 0x8>; - }; - }; diff --git a/kernel/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/kernel/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt index 0aee0ad3f..17327a296 100644 --- a/kernel/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt +++ b/kernel/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt @@ -30,6 +30,9 @@ TWL4030 USB PHY AND COMPARATOR - usb_mode : The mode used by the phy to connect to the controller. "1" specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode. +If a sibling node is compatible "ti,twl4030-bci", then it will find +this device and query it for USB power status. + twl4030-usb { compatible = "ti,twl4030-usb"; interrupts = < 10 4 >; diff --git a/kernel/Documentation/devicetree/bindings/usb/usb-ehci.txt b/kernel/Documentation/devicetree/bindings/usb/usb-ehci.txt index 0b04fdff9..a12d6012a 100644 --- a/kernel/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/kernel/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -13,6 +13,8 @@ Optional properties: - big-endian-desc : boolean, set this for hcds with big-endian descriptors - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc - needs-reset-on-resume : boolean, set this to force EHCI reset after resume + - has-transaction-translator : boolean, set this if EHCI have a Transaction + Translator built into the root hub. - clocks : a list of phandle + clock specifier pairs - phys : phandle + phy specifier pair - phy-names : "usb" diff --git a/kernel/Documentation/devicetree/bindings/vendor-prefixes.txt b/kernel/Documentation/devicetree/bindings/vendor-prefixes.txt index 80339192c..55df1d444 100644 --- a/kernel/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/kernel/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -34,32 +34,40 @@ avago Avago Technologies avic Shanghai AVIC Optoelectronics Co., Ltd. axis Axis Communications AB bosch Bosch Sensortec GmbH +boundary Boundary Devices Inc. brcm Broadcom Corporation buffalo Buffalo, Inc. calxeda Calxeda capella Capella Microsystems, Inc cavium Cavium, Inc. cdns Cadence Design Systems Inc. +ceva Ceva, Inc. chipidea Chipidea, Inc chipone ChipOne chipspark ChipSPARK chrp Common Hardware Reference Platform chunghwa Chunghwa Picture Tubes Ltd. +ciaa Computadora Industrial Abierta Argentina cirrus Cirrus Logic, Inc. cloudengines Cloud Engines, Inc. cnm Chips&Media, Inc. cnxt Conexant Systems, Inc. +compulab CompuLab Ltd. cortina Cortina Systems, Inc. cosmic Cosmic Circuits crystalfontz Crystalfontz America, Inc. +cubietech Cubietech, Ltd. +cypress Cypress Semiconductor Corporation dallas Maxim Integrated Products (formerly Dallas Semiconductor) davicom DAVICOM Semiconductor, Inc. +delta Delta Electronics, Inc. denx Denx Software Engineering digi Digi International Inc. digilent Diglent, Inc. dlg Dialog Semiconductor dlink D-Link Corporation dmo Data Modul AG +ea Embedded Artists AB ebv EBV Elektronik edt Emerging Display Technologies elan Elan Microelectronic Corp. @@ -76,6 +84,7 @@ everspin Everspin Technologies, Inc. excito Excito fcs Fairchild Semiconductor firefly Firefly +focaltech FocalTech Systems Co.,Ltd fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. @@ -90,9 +99,12 @@ gumstix Gumstix, Inc. gw Gateworks Corporation hannstar HannStar Display Corporation haoyu Haoyu Microelectronic Co. Ltd. +hardkernel Hardkernel Co., Ltd himax Himax Technologies, Inc. hisilicon Hisilicon Limited. hit Hitachi Ltd. +hitex Hitex Development Tools +holt Holt Integrated Circuits, Inc. honeywell Honeywell hp Hewlett Packard i2se I2SE GmbH @@ -100,13 +112,17 @@ ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. iom Iomega Corporation img Imagination Technologies Ltd. +ingenic Ingenic Semiconductor innolux Innolux Corporation intel Intel Corporation intercontrol Inter Control Group +invensense InvenSense Inc. isee ISEE 2007 S.L. isil Intersil +jedec JEDEC Solid State Technology Association karo Ka-Ro electronics GmbH keymile Keymile GmbH +kinetic Kinetic Technologies lacie LaCie lantiq Lantiq Semiconductor lenovo Lenovo Group Ltd. @@ -117,6 +133,7 @@ lltc Linear Technology Corporation marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products mediatek MediaTek Inc. +melexis Melexis N.V. merrii Merrii Technology Co., Ltd. micrel Micrel Inc. microchip Microchip Technology Inc. @@ -126,21 +143,27 @@ mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa mpl MPL AG +msi Micro-Star International Co. Ltd. mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) mundoreader Mundo Reader S.L. murata Murata Manufacturing Co., Ltd. mxicy Macronix International Co., Ltd. national National Semiconductor +nec NEC LCD Technologies, Ltd. neonode Neonode Inc. netgear NETGEAR netlogic Broadcom Corporation (formerly NetLogic Microsystems) +netxeon Shenzhen Netxeon Technology CO., LTD newhaven Newhaven Display International nintendo Nintendo nokia Nokia +nuvoton Nuvoton Technology Corporation nvidia NVIDIA nxp NXP Semiconductors +okaya Okaya Electric America, Inc. onnn ON Semiconductor Corp. opencores OpenCores.org +option Option NV ortustech Ortus Technology Co., Ltd. ovti OmniVision Technologies panasonic Panasonic Corporation @@ -149,18 +172,23 @@ pericom Pericom Technology Inc. phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd plathome Plat'Home Co., Ltd. +plda PLDA pixcir PIXCIR MICROELECTRONICS Co., Ltd +pulsedlight PulsedLight, Inc powervr PowerVR (deprecated, use img) qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc qemu QEMU, a generic and open source machine emulator and virtualizer +qi Qi Hardware qnap QNAP Systems, Inc. radxa Radxa raidsonic RaidSonic Technology GmbH ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International +raspberrypi Raspberry Pi Foundation realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation +richtek Richtek Technology Corporation ricoh Ricoh Co. Ltd. rockchip Fuzhou Rockchip Electronics Co., Ltd samsung Samsung Semiconductor @@ -169,6 +197,9 @@ sbs Smart Battery System schindler Schindler seagate Seagate Technology PLC semtech Semtech Corporation +sgx SGX Sensortech +sharp Sharp Corporation +sigma Sigma Designs, Inc. sil Silicon Image silabs Silicon Laboratories siliconmitus Silicon Mitus, Inc. @@ -180,7 +211,9 @@ sitronix Sitronix Technology Corporation skyworks Skyworks Solutions, Inc. smsc Standard Microsystems Corporation snps Synopsys, Inc. +socionext Socionext Inc. solidrun SolidRun +solomon Solomon Systech Limited sony Sony Corporation spansion Spansion Inc. sprd Spreadtrum Communications Inc. @@ -189,19 +222,24 @@ ste ST-Ericsson stericsson ST-Ericsson synology Synology, Inc. tbs TBS Technologies +tcl Toby Churchill Ltd. thine THine Electronics, Inc. ti Texas Instruments tlm Trusted Logic Mobility toradex Toradex AG toshiba Toshiba Corporation toumaz Toumaz +tplink TP-LINK Technologies Co., Ltd. +tronfy Tronfy truly Truly Semiconductors Limited +upisemi uPI Semiconductor Corp. usi Universal Scientific Industrial Co., Ltd. v3 V3 Semiconductor variscite Variscite Ltd. via VIA Technologies, Inc. virtio Virtual I/O Device Specification, developed by the OASIS consortium voipac Voipac Technologies s.r.o. +wexler Wexler winbond Winbond Electronics corp. wlf Wolfson Microelectronics wm Wondermedia Technologies, Inc. @@ -211,3 +249,5 @@ xillybus Xillybus Ltd. xlnx Xilinx zyxel ZyXEL Communications Corp. zarlink Zarlink Semiconductor +zii Zodiac Inflight Innovations +zte ZTE Corp. diff --git a/kernel/Documentation/devicetree/bindings/video/ssd1307fb.txt b/kernel/Documentation/devicetree/bindings/video/ssd1307fb.txt deleted file mode 100644 index 7a125427f..000000000 --- a/kernel/Documentation/devicetree/bindings/video/ssd1307fb.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Solomon SSD1307 Framebuffer Driver - -Required properties: - - compatible: Should be "solomon,<chip>fb-<bus>". The only supported bus for - now is i2c, and the supported chips are ssd1306 and ssd1307. - - reg: Should contain address of the controller on the I2C bus. Most likely - 0x3c or 0x3d - - pwm: Should contain the pwm to use according to the OF device tree PWM - specification [0]. Only required for the ssd1307. - - reset-gpios: Should contain the GPIO used to reset the OLED display - - solomon,height: Height in pixel of the screen driven by the controller - - solomon,width: Width in pixel of the screen driven by the controller - - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is - mapped to. - -Optional properties: - - reset-active-low: Is the reset gpio is active on physical low? - -[0]: Documentation/devicetree/bindings/pwm/pwm.txt - -Examples: -ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7>; - reset-active-low; -}; diff --git a/kernel/Documentation/devicetree/bindings/w1/omap-hdq.txt b/kernel/Documentation/devicetree/bindings/w1/omap-hdq.txt index fef794741..913c5f91a 100644 --- a/kernel/Documentation/devicetree/bindings/w1/omap-hdq.txt +++ b/kernel/Documentation/devicetree/bindings/w1/omap-hdq.txt @@ -1,11 +1,15 @@ * OMAP HDQ One wire bus master controller Required properties: -- compatible : should be "ti,omap3-1w" +- compatible : should be "ti,omap3-1w" or "ti,am4372-hdq" - reg : Address and length of the register set for the device - interrupts : interrupt line. - ti,hwmods : "hdq1w" +Optional properties: +- ti,mode: should be "hdq": HDQ mode "1w": one-wire mode. + If not specified HDQ mode is implied. + Example: - From omap3.dtsi @@ -14,4 +18,5 @@ Example: reg = <0x480b2000 0x1000>; interrupts = <58>; ti,hwmods = "hdq1w"; + ti,mode = "hdq"; }; diff --git a/kernel/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/kernel/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt new file mode 100644 index 000000000..f7cc7c060 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt @@ -0,0 +1,35 @@ +* Atmel SAMA5D4 Watchdog Timer (WDT) Controller + +Required properties: +- compatible: "atmel,sama5d4-wdt" +- reg: base physical address and length of memory mapped region. + +Optional properties: +- timeout-sec: watchdog timeout value (in seconds). +- interrupts: interrupt number to the CPU. +- atmel,watchdog-type: should be "hardware" or "software". + "hardware": enable watchdog fault reset. A watchdog fault triggers + watchdog reset. + "software": enable watchdog fault interrupt. A watchdog fault asserts + watchdog interrupt. +- atmel,idle-halt: present if you want to stop the watchdog when the CPU is + in idle state. + CAUTION: This property should be used with care, it actually makes the + watchdog not counting when the CPU is in idle state, therefore the + watchdog reset time depends on mean CPU usage and will not reset at all + if the CPU stop working while it is in idle state, which is probably + not what you want. +- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is + in debug state. + +Example: + watchdog@fc068640 { + compatible = "atmel,sama5d4-wdt"; + reg = <0xfc068640 0x10>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>; + timeout-sec = <10>; + atmel,watchdog-type = "hardware"; + atmel,dbg-halt; + atmel,idle-halt; + status = "okay"; + }; diff --git a/kernel/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/kernel/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index a4d869744..86fa6de10 100644 --- a/kernel/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/kernel/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -6,6 +6,7 @@ Required properties: - compatible: must be "atmel,at91sam9260-wdt". - reg: physical base address of the controller and length of memory mapped region. +- clocks: phandle to input clock. Optional properties: - timeout-sec: contains the watchdog timeout in seconds. @@ -39,6 +40,7 @@ Example: compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; timeout-sec = <15>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; diff --git a/kernel/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt b/kernel/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt new file mode 100644 index 000000000..84122270b --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt @@ -0,0 +1,19 @@ +BCM7038 Watchdog timer + +Required properties: + +- compatible : should be "brcm,bcm7038-wdt" +- reg : Specifies base physical address and size of the registers. + +Optional properties: + +- clocks: The clock running the watchdog. If no clock is found the + driver will default to 27000000 Hz. + +Example: + +watchdog@f040a7e8 { + compatible = "brcm,bcm7038-wdt"; + clocks = <&upg_fixed>; + reg = <0xf040a7e8 0x16>; +}; diff --git a/kernel/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt b/kernel/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt new file mode 100644 index 000000000..a882967e1 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/watchdog/digicolor-wdt.txt @@ -0,0 +1,25 @@ +Conexant Digicolor SoCs Watchdog timer + +The watchdog functionality in Conexant Digicolor SoCs relies on the so called +"Agent Communication" block. This block includes the eight programmable system +timer counters. The first timer (called "Timer A") is the only one that can be +used as watchdog. + +Required properties: + +- compatible : Should be "cnxt,cx92755-wdt" +- reg : Specifies base physical address and size of the registers +- clocks : phandle; specifies the clock that drives the timer + +Optional properties: + +- timeout-sec : Contains the watchdog timeout in seconds + +Example: + + watchdog@f0000fc0 { + compatible = "cnxt,cx92755-wdt"; + reg = <0xf0000fc0 0x8>; + clocks = <&main_clk>; + timeout-sec = <15>; + }; diff --git a/kernel/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt b/kernel/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt new file mode 100644 index 000000000..09f6b2496 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt @@ -0,0 +1,19 @@ +* NXP LPC18xx Watchdog Timer (WDT) + +Required properties: +- compatible: Should be "nxp,lpc1850-wwdt" +- reg: Should contain WDT registers location and length +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Should contain "wdtclk" and "reg"; the watchdog counter + clock and register interface clock respectively. +- interrupts: Should contain WDT interrupt + +Examples: + +watchdog@40080000 { + compatible = "nxp,lpc1850-wwdt"; + reg = <0x40080000 0x24>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>; + clock-names = "wdtclk", "reg"; + interrupts = <49>; +}; diff --git a/kernel/Documentation/devicetree/bindings/watchdog/omap-wdt.txt b/kernel/Documentation/devicetree/bindings/watchdog/omap-wdt.txt index c22797067..1fa20e453 100644 --- a/kernel/Documentation/devicetree/bindings/watchdog/omap-wdt.txt +++ b/kernel/Documentation/devicetree/bindings/watchdog/omap-wdt.txt @@ -1,10 +1,11 @@ TI Watchdog Timer (WDT) Controller for OMAP Required properties: -compatible: -- "ti,omap3-wdt" for OMAP3 -- "ti,omap4-wdt" for OMAP4 -- ti,hwmods: Name of the hwmod associated to the WDT +- compatible : "ti,omap3-wdt" for OMAP3 or "ti,omap4-wdt" for OMAP4 +- ti,hwmods : Name of the hwmod associated to the WDT + +Optional properties: +- timeout-sec : default watchdog timeout in seconds Examples: diff --git a/kernel/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt b/kernel/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt new file mode 100644 index 000000000..039c5ca45 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/watchdog/st_lpc_wdt.txt @@ -0,0 +1,42 @@ +STMicroelectronics Low Power Controller (LPC) - Watchdog +======================================================== + +LPC currently supports Watchdog OR Real Time Clock OR Clocksource +functionality. + +[See: ../rtc/rtc-st-lpc.txt for RTC options] +[See: ../timer/st,stih407-lpc for Clocksource options] + +Required properties + +- compatible : Must be one of: "st,stih407-lpc" "st,stih416-lpc" + "st,stih415-lpc" "st,stid127-lpc" +- reg : LPC registers base address + size +- interrupts : LPC interrupt line number and associated flags +- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) +- st,lpc-mode : The LPC can run either one of three modes: + ST_LPC_MODE_RTC [0] + ST_LPC_MODE_WDT [1] + ST_LPC_MODE_CLKSRC [2] + One (and only one) mode must be selected. + +Required properties [watchdog mode] + +- st,syscfg : Phandle to syscfg node used to enable watchdog and configure + CPU reset type. +- timeout-sec : Watchdog timeout in seconds + +Optional properties [watchdog mode] + +- st,warm-reset : If present reset type will be 'warm' - if not it will be cold + +Example: + lpc@fde05000 { + compatible = "st,stih407-lpc"; + reg = <0xfde05000 0x1000>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + st,syscfg = <&syscfg_core>; + timeout-sec = <120>; + st,lpc-mode = <ST_LPC_MODE_WDT>; + st,warm-reset; + }; diff --git a/kernel/Documentation/devicetree/booting-without-of.txt b/kernel/Documentation/devicetree/booting-without-of.txt index e49e42326..04d34f6a5 100644 --- a/kernel/Documentation/devicetree/booting-without-of.txt +++ b/kernel/Documentation/devicetree/booting-without-of.txt @@ -856,6 +856,10 @@ address which can extend beyond that limit. name may clash with standard defined ones, you prefix them with your vendor name and a comma. + Additional properties for the root node: + + - serial-number : a string representing the device's serial number + b) The /cpus node This node is the parent of all individual CPU nodes. It doesn't |