summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/arm/mrvl
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/Documentation/devicetree/bindings/arm/mrvl
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/arm/mrvl')
-rw-r--r--kernel/Documentation/devicetree/bindings/arm/mrvl/intc.txt60
1 files changed, 0 insertions, 60 deletions
diff --git a/kernel/Documentation/devicetree/bindings/arm/mrvl/intc.txt b/kernel/Documentation/devicetree/bindings/arm/mrvl/intc.txt
deleted file mode 100644
index 8b53273cb..000000000
--- a/kernel/Documentation/devicetree/bindings/arm/mrvl/intc.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Marvell MMP Interrupt controller
-
-Required properties:
-- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
- "mrvl,mmp2-mux-intc"
-- reg : Address and length of the register set of the interrupt controller.
- If the interrupt controller is intc, address and length means the range
- of the whold interrupt controller. If the interrupt controller is mux-intc,
- address and length means one register. Since address of mux-intc is in the
- range of intc. mux-intc is secondary interrupt controller.
-- reg-names : Name of the register set of the interrupt controller. It's
- only required in mux-intc interrupt controller.
-- interrupts : Should be the port interrupt shared by mux interrupts. It's
- only required in mux-intc interrupt controller.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Specifies the number of cells needed to encode an
- interrupt source.
-- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
- controller.
-- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
- detection first.
-
-Example:
- intc: interrupt-controller@d4282000 {
- compatible = "mrvl,mmp2-intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xd4282000 0x1000>;
- mrvl,intc-nr-irqs = <64>;
- };
-
- intcmux4@d4282150 {
- compatible = "mrvl,mmp2-mux-intc";
- interrupts = <4>;
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0x150 0x4>, <0x168 0x4>;
- reg-names = "mux status", "mux mask";
- mrvl,intc-nr-irqs = <2>;
- };
-
-* Marvell Orion Interrupt controller
-
-Required properties
-- compatible : Should be "marvell,orion-intc".
-- #interrupt-cells: Specifies the number of cells needed to encode an
- interrupt source. Supported value is <1>.
-- interrupt-controller : Declare this node to be an interrupt controller.
-- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
- One entry in the list represents 32 interrupts.
-
-Example:
-
- intc: interrupt-controller {
- compatible = "marvell,orion-intc", "marvell,intc";
- interrupt-controller;
- #interrupt-cells = <1>;
- reg = <0xfed20204 0x04>,
- <0xfed20214 0x04>;
- };