These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 52 deletions

diff --git a/kernel/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/kernel/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
deleted file mode 100644
index 5da38c5ed..000000000
--- a/kernel/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Samsung Exynos Power Domains
-
-Exynos processors include support for multiple power domains which are used
-to gate power to one or more peripherals on the processor.
-
-Required Properties:
-- compatible: should be one of the following.
-    * samsung,exynos4210-pd - for exynos4210 type power domain.
-- reg: physical base address of the controller and length of memory mapped
-    region.
-- #power-domain-cells: number of cells in power domain specifier;
-    must be 0.
-
-Optional Properties:
-- clocks: List of clock handles. The parent clocks of the input clocks to the
-	devices in this power domain are set to oscclk before power gating
-	and restored back after powering on a domain. This is required for
-	all domains which are powered on and off and not required for unused
-	domains.
-- clock-names: The following clocks can be specified:
-	- oscclk: Oscillator clock.
-	- pclkN, clkN: Pairs of parent of input clock and input clock to the
-		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
-		are supported currently.
-	- asbN: Clocks required by asynchronous bridges (ASB) present in
-		the power domain. These clock should be enabled during power
-		domain on/off operations.
-- power-domains: phandle pointing to the parent power domain, for more details
-		 see Documentation/devicetree/bindings/power/power_domain.txt
-
-Node of a device using power domains must have a power-domains property
-defined with a phandle to respective power domain.
-
-Example:
-
-	lcd0: power-domain-lcd0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C00 0x10>;
-		#power-domain-cells = <0>;
-	};
-
-	mfc_pd: power-domain@10044060 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044060 0x20>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
-			<&clock CLK_MOUT_USER_ACLK333>;
-		clock-names = "oscclk", "pclk0", "clk0";
-		#power-domain-cells = <0>;
-	};
-
-See Documentation/devicetree/bindings/power/power_domain.txt for description
-of consumer-side bindings.