summaryrefslogtreecommitdiffstats
path: root/docs/installationprocedure
diff options
context:
space:
mode:
authorBin Hu <bh526r@att.com>2016-08-24 08:04:45 -0700
committerBin Hu <bh526r@att.com>2016-08-24 08:04:45 -0700
commit6330b5dbb1c1a3915170b5ba7278023f30b860fe (patch)
tree1c9c9742d7207a8d156cc9ed229cadcb030d16e0 /docs/installationprocedure
parente6c979099c3c50395841be993f326952ee62cabf (diff)
Adjust index.rst based on updated doc structure
Change-Id: I2cd71538f2dda1deffeeb5bd12de404f811b8195 Signed-off-by: Bin Hu <bh526r@att.com>
Diffstat (limited to 'docs/installationprocedure')
-rw-r--r--docs/installationprocedure/index.rst208
1 files changed, 12 insertions, 196 deletions
diff --git a/docs/installationprocedure/index.rst b/docs/installationprocedure/index.rst
index a28bced..0028f05 100644
--- a/docs/installationprocedure/index.rst
+++ b/docs/installationprocedure/index.rst
@@ -2,204 +2,20 @@
.. http://creativecommons.org/licenses/by/4.0
.. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat)
-=========================================
-Install OPNFV on IPv6-Only Infrastructure
-=========================================
+===================================================
+IPv6 Installation Procedure and Configuration Guide
+===================================================
-This section provides instructions to install OPNFV on IPv6-only Infrastructure. All underlay networks
-and API endpoints will be IPv6-only except:
+:Abstract:
-1. "admin" network in underlay/undercloud still has to be IPv4, due to lack of support of IPMI
- over IPv6 or PXE over IPv6.
-2. OVS VxLAN (or GRE) tunnel endpoint is still IPv4 only, although IPv6 traffic can be
- encapsulated within the tunnel.
-3. Metadata server is still IPv4 only.
+This document provides the users with:
-Except the limitations above, the use case scenario of the IPv6-only infrastructure includes:
+1. Installation Procedure to install OPNFV Colorado Release on IPv6-only Infrastructure
+2. Configuration Guide to set up a service VM as an IPv6 vRouter using OPNFV Colorado Release
-1. Support OPNFV deployment on an IPv6 only infrastructure.
-2. Horizon/ODL-DLUX access using IPv6 address from an external host.
-3. OpenStack API access using IPv6 addresses from various python-clients.
-4. Ability to create Neutron Routers, IPv6 subnets (e.g. SLAAC/DHCPv6-Stateful/
- DHCPv6-Stateless) to support North-South traffic.
-5. Inter VM communication (East-West routing) when VMs are spread
- across two compute nodes.
-6. VNC access into a VM using IPv6 addresses.
-
--------------------------------------------
-Install OPNFV in OpenStack-Only Environment
--------------------------------------------
-
-**Apex Installer**:
-
-.. code-block:: bash
-
- # HA, Virtual deployment in OpenStack-only environment
- ./opnfv-deploy -v -d /etc/opnfv-apex/os-nosdn-nofeature-ha.yaml \
- -n /etc/opnfv-apex/network_setting_v6.yaml
-
- # HA, Bare Metal deployment in OpenStack-only environment
- ./opnfv-deploy -d /etc/opnfv-apex/os-nosdn-nofeature-ha.yaml \
- -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml
-
- # Non-HA, Virtual deployment in OpenStack-only environment
- ./opnfv-deploy -v -d /etc/opnfv-apex/os-nosdn-nofeature-noha.yaml \
- -n /etc/opnfv-apex/network_setting_v6.yaml
-
- # Non-HA, Bare Metal deployment in OpenStack-only environment
- ./opnfv-deploy -d /etc/opnfv-apex/os-nosdn-nofeature-noha.yaml \
- -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml
-
- # Note:
- #
- # 1. Parameter ""-v" is mandatory for Virtual deployment
- # 2. Parameter "-i <inventory file>" is mandatory for Bare Metal deployment
- # 2.1 Refer to https://git.opnfv.org/cgit/apex/tree/config/inventory for examples of inventory file
- # 3. You can use "-n /etc/opnfv-apex/network_setting.yaml" for deployment in IPv4 infrastructure
-
-**Joid** Installer:
-
-.. code-block:: bash
-
- # HA deployment in OpenStack-only environment
- ./deploy.sh -o mitaka -s nosdn -t ha -l default -f ipv6
-
- # Non-HA deployment in OpenStack-only environment
- ./deploy.sh -o mitaka -s nosdn -t nonha -l default -f ipv6
-
-Please **NOTE** that:
-
-* You need to refer to **installer's documentation** for other necessary
- parameters applicable to your deployment.
-* You need to refer to **Release Notes** and **installer's documentation** if there is
- any issue in installation.
-
---------------------------------------------------
-Install OPNFV in OpenStack with ODL-L2 Environment
---------------------------------------------------
-
-**Apex Installer**:
-
-.. code-block:: bash
-
- # HA, Virtual deployment in OpenStack with Open Daylight L2-only environment
- ./opnfv-deploy -v -d /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml \
- -n /etc/opnfv-apex/network_setting_v6.yaml
-
- # HA, Bare Metal deployment in OpenStack with Open Daylight L2-only environment
- ./opnfv-deploy -d /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml \
- -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml
-
- # Non-HA deployment in OpenStack with Open Daylight L2-only environment
- # There is no settings file provided by default for odl_l2 non-HA deployment
- # You need to copy /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml to another file
- # e.g. /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml
- # and change the "ha_enabled" parameter to be "false", i.e.: "ha_enabled: false", and:
-
- # - For Non-HA, Virtual deployment
- ./opnfv-deploy -v -d /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml \
- -n /etc/opnfv-apex/network_setting_v6.yaml
-
- # - For Non-HA, Bare Metal deployment
- ./opnfv-deploy -d /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml \
- -i <inventory file> -n /etc/opnfv-apex/network_setting_v6.yaml
-
- # Note:
- #
- # 1. Parameter ""-v" is mandatory for Virtual deployment
- # 2. Parameter "-i <inventory file>" is mandatory for Bare Metal deployment
- # 2.1 Refer to https://git.opnfv.org/cgit/apex/tree/config/inventory for examples of inventory file
- # 3. You can use "-n /etc/opnfv-apex/network_setting.yaml" for deployment in IPv4 infrastructure
-
-**Joid** Installer:
-
-.. code-block:: bash
-
- # HA deployment in OpenStack with Open Daylight L2-only environment
- ./deploy.sh -o mitaka -s odl -t ha -l default -f ipv6
-
- # Non-HA deployment in OpenStack with Open Daylight L2-only environment
- ./deploy.sh -o mitaka -s odl -t nonha -l default -f ipv6
-
-Please **NOTE** that:
-
-* You need to refer to **installer's documentation** for other necessary
- parameters applicable to your deployment.
-* You need to refer to **Release Notes** and **installer's documentation** if there is
- any issue in installation.
-
--------------------
-Testing Methodology
--------------------
-
-There are 2 levels of testing to validate the deployment.
-
-++++++++++++++++
-Underlay Testing
-++++++++++++++++
-
-**Underlay** Testing is to validate that API endpoints are listening on IPv6 addresses.
-This can be as simple as validating Keystone service, and as complete as validating each
-API endpoint. It is important to reuse Tempest API testing.
-
-Please **Note** that, to the best of our knowledge, Tempest API testing does not validate
-API endpoints listening on IPv6 addresses. Thus Underlay Testing is postponed to future
-release until Tempest API testing is ready to validate API endpoints listening on IPv6 addresses.
-
-+++++++++++++++
-Overlay Testing
-+++++++++++++++
-
-**Overlay** Testing is to validate that IPv6 is supported in tenant networks, subnets and routers.
-Both Tempest API testing and Tempest Scenario testing are used in our Overlay Testing.
-
-Tempest API testing validates that the Neutron API supports the creation of IPv6 networks, subnets, routers, etc:
-
-.. code-block:: bash
-
- tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network
- tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port
- tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet
- tempest.api.network.test_networks.NetworksIpV6Test.test_create_update_delete_network_subnet
- tempest.api.network.test_networks.NetworksIpV6Test.test_external_network_visibility
- tempest.api.network.test_networks.NetworksIpV6Test.test_list_networks
- tempest.api.network.test_networks.NetworksIpV6Test.test_list_subnets
- tempest.api.network.test_networks.NetworksIpV6Test.test_show_network
- tempest.api.network.test_networks.NetworksIpV6Test.test_show_subnet
- tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_create_update_delete_network_subnet
- tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_external_network_visibility
- tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_networks
- tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_subnets
- tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_network
- tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_subnet
- tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_in_allowed_allocation_pools
- tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_with_no_securitygroups
- tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_update_delete_port
- tempest.api.network.test_ports.PortsIpV6TestJSON.test_list_ports
- tempest.api.network.test_ports.PortsIpV6TestJSON.test_show_port
- tempest.api.network.test_routers.RoutersIpV6Test.test_add_multiple_router_interfaces
- tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_port_id
- tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_subnet_id
- tempest.api.network.test_routers.RoutersIpV6Test.test_create_show_list_update_delete_router
- tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_list_update_show_delete_security_group
- tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_show_delete_security_group_rule
- tempest.api.network.test_security_groups.SecGroupIPv6Test.test_list_security_groups
-
-Tempest Scenario testing validates some specific overlay IPv6 scenarios
-(i.e. use cases) as follows:
-
-.. code-block:: bash
-
- tempest.scenario.test_network_v6.TestGettingAddress.test_dhcp6_stateless_from_os
- tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_dhcp6_stateless_from_os
- tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_dhcpv6_stateless
- tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_slaac
- tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_slaac_from_os
- tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_dhcpv6_stateless
- tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_slaac
- tempest.scenario.test_network_v6.TestGettingAddress.test_slaac_from_os
-
-The above Tempest API testing and Scenario testing are quite comprehensive to validate
-overlay IPv6 tenant networks. They are part of OpenStack default Smoke Tests,
-run in FuncTest and integrated into OPNFV's CI/CD environment.
+.. toctree::
+ :numbered:
+ :maxdepth: 4
+ ./installation.instruction.rst
+ ./feature.configuration.rst