From 6330b5dbb1c1a3915170b5ba7278023f30b860fe Mon Sep 17 00:00:00 2001 From: Bin Hu Date: Wed, 24 Aug 2016 08:04:45 -0700 Subject: Adjust index.rst based on updated doc structure Change-Id: I2cd71538f2dda1deffeeb5bd12de404f811b8195 Signed-off-by: Bin Hu --- docs/installationprocedure/index.rst | 208 ++--------------------------------- 1 file changed, 12 insertions(+), 196 deletions(-) (limited to 'docs/installationprocedure') diff --git a/docs/installationprocedure/index.rst b/docs/installationprocedure/index.rst index a28bced..0028f05 100644 --- a/docs/installationprocedure/index.rst +++ b/docs/installationprocedure/index.rst @@ -2,204 +2,20 @@ .. http://creativecommons.org/licenses/by/4.0 .. (c) Bin Hu (AT&T) and Sridhar Gaddam (RedHat) -========================================= -Install OPNFV on IPv6-Only Infrastructure -========================================= +=================================================== +IPv6 Installation Procedure and Configuration Guide +=================================================== -This section provides instructions to install OPNFV on IPv6-only Infrastructure. All underlay networks -and API endpoints will be IPv6-only except: +:Abstract: -1. "admin" network in underlay/undercloud still has to be IPv4, due to lack of support of IPMI - over IPv6 or PXE over IPv6. -2. OVS VxLAN (or GRE) tunnel endpoint is still IPv4 only, although IPv6 traffic can be - encapsulated within the tunnel. -3. Metadata server is still IPv4 only. +This document provides the users with: -Except the limitations above, the use case scenario of the IPv6-only infrastructure includes: +1. Installation Procedure to install OPNFV Colorado Release on IPv6-only Infrastructure +2. Configuration Guide to set up a service VM as an IPv6 vRouter using OPNFV Colorado Release -1. Support OPNFV deployment on an IPv6 only infrastructure. -2. Horizon/ODL-DLUX access using IPv6 address from an external host. -3. OpenStack API access using IPv6 addresses from various python-clients. -4. Ability to create Neutron Routers, IPv6 subnets (e.g. SLAAC/DHCPv6-Stateful/ - DHCPv6-Stateless) to support North-South traffic. -5. Inter VM communication (East-West routing) when VMs are spread - across two compute nodes. -6. VNC access into a VM using IPv6 addresses. - -------------------------------------------- -Install OPNFV in OpenStack-Only Environment -------------------------------------------- - -**Apex Installer**: - -.. code-block:: bash - - # HA, Virtual deployment in OpenStack-only environment - ./opnfv-deploy -v -d /etc/opnfv-apex/os-nosdn-nofeature-ha.yaml \ - -n /etc/opnfv-apex/network_setting_v6.yaml - - # HA, Bare Metal deployment in OpenStack-only environment - ./opnfv-deploy -d /etc/opnfv-apex/os-nosdn-nofeature-ha.yaml \ - -i -n /etc/opnfv-apex/network_setting_v6.yaml - - # Non-HA, Virtual deployment in OpenStack-only environment - ./opnfv-deploy -v -d /etc/opnfv-apex/os-nosdn-nofeature-noha.yaml \ - -n /etc/opnfv-apex/network_setting_v6.yaml - - # Non-HA, Bare Metal deployment in OpenStack-only environment - ./opnfv-deploy -d /etc/opnfv-apex/os-nosdn-nofeature-noha.yaml \ - -i -n /etc/opnfv-apex/network_setting_v6.yaml - - # Note: - # - # 1. Parameter ""-v" is mandatory for Virtual deployment - # 2. Parameter "-i " is mandatory for Bare Metal deployment - # 2.1 Refer to https://git.opnfv.org/cgit/apex/tree/config/inventory for examples of inventory file - # 3. You can use "-n /etc/opnfv-apex/network_setting.yaml" for deployment in IPv4 infrastructure - -**Joid** Installer: - -.. code-block:: bash - - # HA deployment in OpenStack-only environment - ./deploy.sh -o mitaka -s nosdn -t ha -l default -f ipv6 - - # Non-HA deployment in OpenStack-only environment - ./deploy.sh -o mitaka -s nosdn -t nonha -l default -f ipv6 - -Please **NOTE** that: - -* You need to refer to **installer's documentation** for other necessary - parameters applicable to your deployment. -* You need to refer to **Release Notes** and **installer's documentation** if there is - any issue in installation. - --------------------------------------------------- -Install OPNFV in OpenStack with ODL-L2 Environment --------------------------------------------------- - -**Apex Installer**: - -.. code-block:: bash - - # HA, Virtual deployment in OpenStack with Open Daylight L2-only environment - ./opnfv-deploy -v -d /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml \ - -n /etc/opnfv-apex/network_setting_v6.yaml - - # HA, Bare Metal deployment in OpenStack with Open Daylight L2-only environment - ./opnfv-deploy -d /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml \ - -i -n /etc/opnfv-apex/network_setting_v6.yaml - - # Non-HA deployment in OpenStack with Open Daylight L2-only environment - # There is no settings file provided by default for odl_l2 non-HA deployment - # You need to copy /etc/opnfv-apex/os-odl_l2-nofeature-ha.yaml to another file - # e.g. /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml - # and change the "ha_enabled" parameter to be "false", i.e.: "ha_enabled: false", and: - - # - For Non-HA, Virtual deployment - ./opnfv-deploy -v -d /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml \ - -n /etc/opnfv-apex/network_setting_v6.yaml - - # - For Non-HA, Bare Metal deployment - ./opnfv-deploy -d /etc/opnfv-apex/os-odl_l2-nofeature-noha.yaml \ - -i -n /etc/opnfv-apex/network_setting_v6.yaml - - # Note: - # - # 1. Parameter ""-v" is mandatory for Virtual deployment - # 2. Parameter "-i " is mandatory for Bare Metal deployment - # 2.1 Refer to https://git.opnfv.org/cgit/apex/tree/config/inventory for examples of inventory file - # 3. You can use "-n /etc/opnfv-apex/network_setting.yaml" for deployment in IPv4 infrastructure - -**Joid** Installer: - -.. code-block:: bash - - # HA deployment in OpenStack with Open Daylight L2-only environment - ./deploy.sh -o mitaka -s odl -t ha -l default -f ipv6 - - # Non-HA deployment in OpenStack with Open Daylight L2-only environment - ./deploy.sh -o mitaka -s odl -t nonha -l default -f ipv6 - -Please **NOTE** that: - -* You need to refer to **installer's documentation** for other necessary - parameters applicable to your deployment. -* You need to refer to **Release Notes** and **installer's documentation** if there is - any issue in installation. - -------------------- -Testing Methodology -------------------- - -There are 2 levels of testing to validate the deployment. - -++++++++++++++++ -Underlay Testing -++++++++++++++++ - -**Underlay** Testing is to validate that API endpoints are listening on IPv6 addresses. -This can be as simple as validating Keystone service, and as complete as validating each -API endpoint. It is important to reuse Tempest API testing. - -Please **Note** that, to the best of our knowledge, Tempest API testing does not validate -API endpoints listening on IPv6 addresses. Thus Underlay Testing is postponed to future -release until Tempest API testing is ready to validate API endpoints listening on IPv6 addresses. - -+++++++++++++++ -Overlay Testing -+++++++++++++++ - -**Overlay** Testing is to validate that IPv6 is supported in tenant networks, subnets and routers. -Both Tempest API testing and Tempest Scenario testing are used in our Overlay Testing. - -Tempest API testing validates that the Neutron API supports the creation of IPv6 networks, subnets, routers, etc: - -.. code-block:: bash - - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet - tempest.api.network.test_networks.NetworksIpV6Test.test_create_update_delete_network_subnet - tempest.api.network.test_networks.NetworksIpV6Test.test_external_network_visibility - tempest.api.network.test_networks.NetworksIpV6Test.test_list_networks - tempest.api.network.test_networks.NetworksIpV6Test.test_list_subnets - tempest.api.network.test_networks.NetworksIpV6Test.test_show_network - tempest.api.network.test_networks.NetworksIpV6Test.test_show_subnet - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_create_update_delete_network_subnet - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_external_network_visibility - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_networks - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_list_subnets - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_network - tempest.api.network.test_networks.NetworksIpV6TestAttrs.test_show_subnet - tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_in_allowed_allocation_pools - tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_with_no_securitygroups - tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_update_delete_port - tempest.api.network.test_ports.PortsIpV6TestJSON.test_list_ports - tempest.api.network.test_ports.PortsIpV6TestJSON.test_show_port - tempest.api.network.test_routers.RoutersIpV6Test.test_add_multiple_router_interfaces - tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_port_id - tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_subnet_id - tempest.api.network.test_routers.RoutersIpV6Test.test_create_show_list_update_delete_router - tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_list_update_show_delete_security_group - tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_show_delete_security_group_rule - tempest.api.network.test_security_groups.SecGroupIPv6Test.test_list_security_groups - -Tempest Scenario testing validates some specific overlay IPv6 scenarios -(i.e. use cases) as follows: - -.. code-block:: bash - - tempest.scenario.test_network_v6.TestGettingAddress.test_dhcp6_stateless_from_os - tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_dhcp6_stateless_from_os - tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_dhcpv6_stateless - tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_slaac - tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_slaac_from_os - tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_dhcpv6_stateless - tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_slaac - tempest.scenario.test_network_v6.TestGettingAddress.test_slaac_from_os - -The above Tempest API testing and Scenario testing are quite comprehensive to validate -overlay IPv6 tenant networks. They are part of OpenStack default Smoke Tests, -run in FuncTest and integrated into OPNFV's CI/CD environment. +.. toctree:: + :numbered: + :maxdepth: 4 + ./installation.instruction.rst + ./feature.configuration.rst -- cgit 1.2.3-korg