Update all existing test specifications

1. Update the names of 2 vping test cases
2. Update the names of 8 ha test cases
3. Update the sub test cases within osinterop 2017.09
4. Split IPv6 into ipv6_api and ipv6_scenario
5. Update the names of sdnvpn test cases
6. Update the names of 4 tempest scenario test cases
7. Remove forwardingpackets

JIRA: DOVETAIL-685

Change-Id: I0d91b8a0477576e18581eb2788fdb666063c89b7
Signed-off-by: xudan <xudan16@huawei.com>

1 files changed, 454 insertions, 0 deletions

diff --git a/docs/testing/user/testspecification/tempest_network_security/index.rst b/docs/testing/user/testspecification/tempest_network_security/index.rst
new file mode 100644
index 00000000..2a785289
--- /dev/null
+++ b/docs/testing/user/testspecification/tempest_network_security/index.rst
@@ -0,0 +1,454 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Huawei Technologies Co.,Ltd
+
+===================================================
+Security Group and Port Security test specification
+===================================================
+
+.. toctree::
+   :maxdepth: 2
+
+Scope
+=====
+
+The security group and port security test area evaluates the ability of the
+system under test to support packet filtering by security group and port security.
+The tests in this test area will evaluate preventing MAC spoofing by port security,
+basic security group operations including testing cross/in tenant traffic, testing
+multiple security groups, using port security to disable security groups and
+updating security groups.
+
+References
+==========
+
+N/A
+
+Definitions and abbreviations
+=============================
+
+The following terms and abbreviations are used in conjunction with this test
+area
+
+- API - Application Programming Interface
+- ICMP - Internet Control Message Protocol
+- MAC - Media Access Control
+- NFVi - Network Functions Virtualization infrastructure
+- SSH - Secure Shell
+- TCP - Transmission Control Protocol
+- VIM - Virtual Infrastructure Manager
+- VM - Virtual Machine
+
+System Under Test (SUT)
+=======================
+
+The system under test is assumed to be the NFVi and VIM in operation on a
+Pharos compliant infrastructure.
+
+Test Area Structure
+===================
+
+The test area is structured based on the basic operations of security group and
+port security. Each test case is able to run independently, i.e. irrelevant of
+the state created by a previous test. Specifically, every test performs clean-up
+operations which return the system to the same state as before the test.
+
+All these test cases are included in the test case dovetail.tempest.network_security of
+OVP test suite.
+
+Test Descriptions
+=================
+
+----------------------
+API Used and Reference
+----------------------
+
+Security Groups: https://developer.openstack.org/api-ref/network/v2/index.html#security-groups-security-groups
+
+- create security group
+- delete security group
+
+Networks: https://developer.openstack.org/api-ref/networking/v2/index.html#networks
+
+- create network
+- delete network
+- list networks
+- create floating ip
+- delete floating ip
+
+Routers and interface: https://developer.openstack.org/api-ref/networking/v2/index.html#routers-routers
+
+- create router
+- delete router
+- list routers
+- add interface to router
+
+Subnets: https://developer.openstack.org/api-ref/networking/v2/index.html#subnets
+
+- create subnet
+- list subnets
+- delete subnet
+
+Servers: https://developer.openstack.org/api-ref/compute/
+
+- create keypair
+- create server
+- delete server
+- add/assign floating ip
+
+Ports: https://developer.openstack.org/api-ref/networking/v2/index.html#ports
+
+- update port
+- list ports
+- show port details
+
+--------------------------------------------
+Test Case 1 - Port Security and MAC Spoofing
+--------------------------------------------
+
+Test case specification
+-----------------------
+
+tempest.scenario.test_network_basic_ops.TestNetworkBasicOps.test_port_security_macspoofing_port
+
+Test preconditions
+------------------
+
+* Neutron port-security extension API
+* Neutron security-group extension API
+* One public network
+
+Basic test flow execution description and pass/fail criteria
+------------------------------------------------------------
+
+Test execution
+''''''''''''''
+
+* Test action 1: Create a security group SG1, which has rules for allowing incoming
+  SSH and ICMP traffic
+* Test action 2: Create a neutron network NET1
+* Test action 3: Create a tenant router R1 which routes traffic to public network
+* Test action 4: Create a subnet SUBNET1 and add it as router interface
+* Test action 5: Create a server VM1 with SG1 and NET1, and assign a floating ip
+  FIP1 (via R1) to VM1
+* Test action 6: Verify can ping FIP1 successfully and can SSH to VM1 with FIP1
+* Test action 7: Create a second neutron network NET2 and subnet SUBNET2, and attach VM1 to NET2
+* Test action 8: Get VM1's ethernet interface NIC2 for NET2
+* Test action 9: Create second server VM2 on NET2
+* Test action 10: Verify VM1 is able to communicate with VM2 via NIC2
+* Test action 11: Login to VM1 and spoof the MAC address of NIC2 to "00:00:00:00:00:01"
+* Test action 12: Verify VM1 fails to communicate with VM2 via NIC2
+* **Test assertion 1:** The ping operation is failed
+* Test action 13: Update 'security_groups' to be none for VM1's NIC2 port
+* Test action 14: Update 'port_security_enable' to be False for VM1's NIC2 port
+* Test action 15: Verify now VM1 is able to communicate with VM2 via NIC2
+* **Test assertion 2:** The ping operation is successful
+* Test action 16: Delete SG1, NET1, NET2, SUBNET1, SUBNET2, R1, VM1, VM2 and FIP1
+
+Pass / fail criteria
+''''''''''''''''''''
+
+This test evaluates the ability to prevent MAC spoofing by using port security.
+Specifically, the test verifies that:
+
+* With port security, the ICMP packets from a spoof server cannot pass the port.
+
+* Without port security, the ICMP packets from a spoof server can pass the port.
+
+In order to pass this test, all test assertions listed in the test execution above need to pass.
+
+Post conditions
+---------------
+
+N/A
+
+------------------------------------------------------
+Test Case 2 - Test Security Group Cross Tenant Traffic
+------------------------------------------------------
+
+Test case specification
+-----------------------
+
+tempest.scenario.test_security_groups_basic_ops.TestSecurityGroupsBasicOps.test_cross_tenant_traffic
+
+Test preconditions
+------------------
+
+* Neutron security-group extension API
+* Two tenants
+* One public network
+
+Basic test flow execution description and pass/fail criteria
+------------------------------------------------------------
+
+Test execution
+''''''''''''''
+
+* Test action 1: Create a neutron network NET1 for primary tenant
+* Test action 2: Create a primary tenant router R1 which routes traffic to public network
+* Test action 3: Create a subnet SUBNET1 and add it as router interface
+* Test action 4: Create 2 empty security groups SG1 and SG2 for primary tenant
+* Test action 5: Add a tcp rule to SG1
+* Test action 6: Create a server VM1 with SG1, SG2 and NET1, and assign a floating ip
+  FIP1 (via R1) to VM1
+* Test action 7: Repeat test action 1 to 6 and create NET2, R2, SUBNET2, SG3, SG4,
+  FIP2 and VM2 for an alt_tenant
+* Test action 8: Verify VM1 fails to communicate with VM2 through FIP2
+* **Test assertion 1:** The ping operation is failed
+* Test action 9: Add ICMP rule to SG4
+* Test action 10: Verify VM1 is able to communicate with VM2 through FIP2
+* **Test assertion 2:** The ping operation is successful
+* Test action 11: Verify VM2 fails to communicate with VM1 through FIP1
+* **Test assertion 3:** The ping operation is failed
+* Test action 12: Add ICMP rule to SG2
+* Test action 13: Verify VM2 is able to communicate with VM1 through FIP1
+* **Test assertion 4:** The ping operation is successful
+* Test action 14: Delete SG1, SG2, SG3, SG4, NET1, NET2, SUBNET1, SUBNET2, R1, R2,
+  VM1, VM2, FIP1 and FIP2
+
+Pass / fail criteria
+''''''''''''''''''''
+
+This test evaluates the ability of the security group to filter packets cross tenant.
+Specifically, the test verifies that:
+
+* Without ICMP security group rule, the ICMP packets cannot be received by the server
+  in another tenant which differs from the source server.
+
+* With ingress ICMP security group rule enabled only at tenant1, the server in tenant2
+  can ping server in tenant1 but not the reverse direction.
+
+* With ingress ICMP security group rule enabled at tenant2 also, the ping works from both directions.
+
+In order to pass this test, all test assertions listed in the test execution above need to pass.
+
+Post conditions
+---------------
+
+N/A
+
+---------------------------------------------------
+Test Case 3 - Test Security Group in Tenant Traffic
+---------------------------------------------------
+
+Test case specification
+-----------------------
+
+tempest.scenario.test_security_groups_basic_ops.TestSecurityGroupsBasicOps.test_in_tenant_traffic
+
+Test preconditions
+------------------
+
+* Neutron security-group extension API
+* One public network
+
+Basic test flow execution description and pass/fail criteria
+------------------------------------------------------------
+
+Test execution
+''''''''''''''
+
+* Test action 1: Create a neutron network NET1
+* Test action 2: Create a tenant router R1 which routes traffic to public network
+* Test action 3: Create a subnet SUBNET1 and add it as router interface
+* Test action 4: Create 2 empty security groups SG1 and SG2
+* Test action 5: Add a tcp rule to SG1
+* Test action 6: Create a server VM1 with SG1, SG2 and NET1, and assign a floating ip
+  FIP1 (via R1) to VM1
+* Test action 7: Create second server VM2 with default security group and NET1
+* Test action 8: Verify VM1 fails to communicate with VM2 through VM2's fixed ip
+* **Test assertion 1:** The ping operation is failed
+* Test action 9: Add ICMP security group rule to default security group
+* Test action 10: Verify VM1 is able to communicate with VM2 through VM2's fixed ip
+* **Test assertion 2:** The ping operation is successful
+* Test action 11: Delete SG1, SG2, NET1, SUBNET1, R1, VM1, VM2 and FIP1
+
+Pass / fail criteria
+''''''''''''''''''''
+
+This test evaluates the ability of the security group to filter packets in one tenant.
+Specifically, the test verifies that:
+
+* Without ICMP security group rule, the ICMP packets cannot be received by the server
+  in the same tenant.
+
+* With ICMP security group rule, the ICMP packets can be received by the server
+  in the same tenant.
+
+In order to pass this test, all test assertions listed in the test execution above need to pass.
+
+Post conditions
+---------------
+
+N/A
+
+-------------------------------------------
+Test Case 4 - Test Multiple Security Groups
+-------------------------------------------
+
+Test case specification
+-----------------------
+
+tempest.scenario.test_security_groups_basic_ops.TestSecurityGroupsBasicOps.test_multiple_security_groups
+
+Test preconditions
+------------------
+
+* Neutron security-group extension API
+* One public network
+
+Basic test flow execution description and pass/fail criteria
+------------------------------------------------------------
+
+Test execution
+''''''''''''''
+
+* Test action 1: Create a neutron network NET1
+* Test action 2: Create a tenant router R1 which routes traffic to public network
+* Test action 3: Create a subnet SUBNET1 and add it as router interface
+* Test action 4: Create 2 empty security groups SG1 and SG2
+* Test action 5: Add a tcp rule to SG1
+* Test action 6: Create a server VM1 with SG1, SG2 and NET1, and assign a floating ip
+  FIP1 (via R1) to VM1
+* Test action 7: Verify failed to ping FIP1
+* **Test assertion 1:** The ping operation is failed
+* Test action 8: Add ICMP security group rule to SG2
+* Test action 9: Verify can ping FIP1 successfully
+* **Test assertion 2:** The ping operation is successful
+* Test action 10: Verify can SSH to VM1 with FIP1
+* **Test assertion 3:** Can SSH to VM1 successfully
+* Test action 11: Delete SG1, SG2, NET1, SUBNET1, R1, VM1 and FIP1
+
+Pass / fail criteria
+''''''''''''''''''''
+
+This test evaluates the ability of multiple security groups to filter packets.
+Specifically, the test verifies that:
+
+* A server with 2 security groups, one with TCP rule and without ICMP rule,
+  cannot receive the ICMP packets sending from the tempest host machine.
+
+* A server with 2 security groups, one with TCP rule and the other with ICMP rule,
+  can receive the ICMP packets sending from the tempest host machine and be connected
+  via the SSH client.
+
+In order to pass this test, all test assertions listed in the test execution above need to pass.
+
+Post conditions
+---------------
+
+N/A
+
+-------------------------------------------------------
+Test Case 5 - Test Port Security Disable Security Group
+-------------------------------------------------------
+
+Test case specification
+-----------------------
+
+tempest.scenario.test_security_groups_basic_ops.TestSecurityGroupsBasicOps.test_port_security_disable_security_group
+
+Test preconditions
+------------------
+
+* Neutron security-group extension API
+* Neutron port-security extension API
+* One public network
+
+Basic test flow execution description and pass/fail criteria
+------------------------------------------------------------
+
+Test execution
+''''''''''''''
+
+* Test action 1: Create a neutron network NET1
+* Test action 2: Create a tenant router R1 which routes traffic to public network
+* Test action 3: Create a subnet SUBNET1 and add it as router interface
+* Test action 4: Create 2 empty security groups SG1 and SG2
+* Test action 5: Add a tcp rule to SG1
+* Test action 6: Create a server VM1 with SG1, SG2 and NET1, and assign a floating ip
+  FIP1 (via R1) to VM1
+* Test action 7: Create second server VM2 with default security group and NET1
+* Test action 8: Update 'security_groups' to be none and 'port_security_enabled' to be
+  True for VM2's port
+* Test action 9: Verify VM1 fails to communicate with VM2 through VM2's fixed ip
+* **Test assertion 1:** The ping operation is failed
+* Test action 10: Update 'security_groups' to be none and 'port_security_enabled' to be
+  False for VM2's port
+* Test action 11: Verify VM1 is able to communicate with VM2 through VM2's fixed ip
+* **Test assertion 2:** The ping operation is successful
+* Test action 12: Delete SG1, SG2, NET1, SUBNET1, R1, VM1, VM2 and FIP1
+
+Pass / fail criteria
+''''''''''''''''''''
+
+This test evaluates the ability of port security to disable security group.
+Specifically, the test verifies that:
+
+* The ICMP packets cannot pass the port whose 'port_security_enabled' is True
+  and security_groups is none.
+
+* The ICMP packets can pass the port whose 'port_security_enabled' is False
+  and security_groups is none.
+
+In order to pass this test, all test assertions listed in the test execution above need to pass.
+
+Post conditions
+---------------
+
+N/A
+
+---------------------------------------------
+Test Case 6 - Test Update Port Security Group
+---------------------------------------------
+
+Test case specification
+-----------------------
+
+tempest.scenario.test_security_groups_basic_ops.TestSecurityGroupsBasicOps.test_port_update_new_security_group
+
+Test preconditions
+------------------
+
+* Neutron security-group extension API
+* One public network
+
+Basic test flow execution description and pass/fail criteria
+------------------------------------------------------------
+
+Test execution
+''''''''''''''
+
+* Test action 1: Create a neutron network NET1
+* Test action 2: Create a tenant router R1 which routes traffic to public network
+* Test action 3: Create a subnet SUBNET1 and add it as router interface
+* Test action 4: Create 2 empty security groups SG1 and SG2
+* Test action 5: Add a tcp rule to SG1
+* Test action 6: Create a server VM1 with SG1, SG2 and NET1, and assign a floating ip
+  FIP1 (via R1) to VM1
+* Test action 7: Create third empty security group SG3
+* Test action 8: Add ICMP rule to SG3
+* Test action 9: Create second server VM2 with default security group and NET1
+* Test action 10: Verify VM1 fails to communicate with VM2 through VM2's fixed ip
+* **Test assertion 1:** The ping operation is failed
+* Test action 11: Update 'security_groups' to be SG3 for VM2's port
+* Test action 12: Verify VM1 is able to communicate with VM2 through VM2's fixed ip
+* **Test assertion 2:** The ping operation is successful
+* Test action 13: Delete SG1, SG2, SG3, NET1, SUBNET1, R1, VM1, VM2 and FIP1
+
+Pass / fail criteria
+''''''''''''''''''''
+
+This test evaluates the ability to update port with a new security group.
+Specifically, the test verifies that:
+
+* Without ICMP security group rule, the VM cannot receive ICMP packets.
+
+* Update the port's security group which has ICMP rule, the VM can receive ICMP packets.
+
+In order to pass this test, all test assertions listed in the test execution above need to pass.
+
+Post conditions
+---------------
+
+N/A