diff options
Diffstat (limited to 'yardstick/tests/unit/benchmark/scenarios/networking/ipv4_throughput_vpe.yaml')
| -rw-r--r-- | yardstick/tests/unit/benchmark/scenarios/networking/ipv4_throughput_vpe.yaml | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/yardstick/tests/unit/benchmark/scenarios/networking/ipv4_throughput_vpe.yaml b/yardstick/tests/unit/benchmark/scenarios/networking/ipv4_throughput_vpe.yaml new file mode 100644 index 000000000..2123e4705 --- /dev/null +++ b/yardstick/tests/unit/benchmark/scenarios/networking/ipv4_throughput_vpe.yaml @@ -0,0 +1,101 @@ +# Copyright (c) 2016-2017 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# flow definition for ACL tests - 1K flows - ipv4 only +# +# the number of flows defines the widest range of parameters +# for example if srcip_range=1.0.0.1-1.0.0.255 and dst_ip_range=10.0.0.1-10.0.1.255 +# and it should define only 16 flows +# +#there is assumption that packets generated will have a random sequences of following addresses pairs +# in the packets +# 1. src=1.x.x.x(x.x.x =random from 1..255) dst=10.x.x.x (random from 1..512) +# 2. src=1.x.x.x(x.x.x =random from 1..255) dst=10.x.x.x (random from 1..512) +# ... +# 512. src=1.x.x.x(x.x.x =random from 1..255) dst=10.x.x.x (random from 1..512) +# +# not all combination should be filled +# Any other field with random range will be added to flow definition +# +# the example.yaml provides all possibilities for traffic generation +# +# the profile defines a public and private side to make limited traffic correlation +# between private and public side same way as it is made by IXIA solution. +# +schema: "isb:traffic_profile:0.1" + +# This file is a template, it will be filled with values from tc.yaml before passing to the traffic generator + +name: rfc2544 +description: Traffic profile to run RFC2544 latency +traffic_profile: + traffic_type : RFC2544Profile # defines traffic behavior - constant or look for highest possible throughput + frame_rate : 100 # pc of linerate + # that specifies a range (e.g. ipv4 address, port) + + +private: + ipv4: + outer_l2: + framesize: + 64B: "{{ get(imix, 'imix.uplink.imix_small', '0') }}" + 128B: "{{ get(imix, 'imix.uplink.imix_128B', '0') }}" + 256B: "{{ get(imix, 'imix.uplink.imix_256B', '0') }}" + 373b: "{{ get(imix, 'imix.uplink.imix_373B', '0') }}" + 570B: "{{get(imix, 'imix.uplink.imix_570B', '0') }}" + 1400B: "{{get(imix, 'imix.uplink.imix_1400B', '0') }}" + 1518B: "{{get(imix, 'imix.uplink.imix_1500B', '0') }}" + + QinQ: + S-VLAN: + id: 128 + priority: 0 + cfi: 0 + C-VLAN: + id: 512 + priority: 0 + cfi: 0 + + outer_l3v4: + proto: "tcp" + srcip4: "{{get(flow, 'flow.srcip4_range', '192.168.0.0-192.168.255.255') }}" + dstip4: "{{get(flow, 'flow.dstip4_range', '192.16.0.0-192.16.0.31') }}" + ttl: 32 + dscp: 32 + + outer_l4: + srcport: "{{get(flow, 'flow.srcport_range', '0') }}" + dstport: "{{get(flow, 'flow.dstport_range', '0') }}" +public: + ipv4: + outer_l2: + framesize: + 64B: "{{ get(imix, 'imix.uplink.imix_small', '0') }}" + 128B: "{{ get(imix, 'imix.uplink.imix_128B', '0') }}" + 256B: "{{ get(imix, 'imix.uplink.imix_256B', '0') }}" + 373b: "{{ get(imix, 'imix.uplink.imix_373B', '0') }}" + 570B: "{{get(imix, 'imix.uplink.imix_570B', '0') }}" + 1400B: "{{get(imix, 'imix.uplink.imix_1400B', '0') }}" + 1518B: "{{get(imix, 'imix.uplink.imix_1500B', '0') }}" + + outer_l3v4: + proto: "tcp" + srcip4: "{{get(flow, 'flow.dstip4_range', '192.16.0.0-192.16.0.31') }}" + dstip4: "{{get(flow, 'flow.srcip4_range', '192.168.0.0-192.168.255.255') }}" + ttl: 32 + dscp: 32 + + outer_l4: + srcport: "{{get(flow, 'flow.dstport_range', '0') }}" + dstport: "{{get(flow, 'flow.srcport_range', '0') }}" |