aboutsummaryrefslogtreecommitdiffstats
path: root/samples/vnf_samples
diff options
context:
space:
mode:
Diffstat (limited to 'samples/vnf_samples')
-rw-r--r--samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_aesgcm_IMIX_trex.yaml95
-rw-r--r--samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_aesgcm_trex.yaml96
-rw-r--r--samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_cbcsha1_IMIX_trex.yaml95
-rw-r--r--samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_cbcsha1_trex.yaml96
-rw-r--r--samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_aesgcm_IMIX_trex.yaml95
-rw-r--r--samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_aesgcm_trex.yaml21
-rw-r--r--samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_cbcsha1_IMIX_trex.yaml95
-rw-r--r--samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_cbcsha1_trex.yaml96
8 files changed, 682 insertions, 7 deletions
diff --git a/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_aesgcm_IMIX_trex.yaml b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_aesgcm_IMIX_trex.yaml
new file mode 100644
index 000000000..a9c0e4860
--- /dev/null
+++ b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_aesgcm_IMIX_trex.yaml
@@ -0,0 +1,95 @@
+# Copyright (c) 2019 Viosoft Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{% set mlr_search = mlr_search or false %}
+{% set vports = vports or 2 %}
+{% set tolerance_low = tolerance_low or 0.0 %}
+{% set tolerance_high = tolerance_high or 0.005 %}
+{% set tunnels = tunnels or 1 %}
+{% set flow_count = flow_count or 1 %}
+{% set worker_threads = worker_threads or [1] %}
+---
+schema: yardstick:task:0.1
+description: >
+ This is the VPP IPSec performance tests based on the Data Plane Development
+ Kit (DPDK) Cryptodev framework. DUT1 and DUT2 are configured with DPDK HW
+ cryptodev devices and {{ tunnels }} IPsec tunnels between them. DUTs get
+ IPv4 traffic from TG with IMIX packet size and number of flows is
+ {{ flow_count }}, encrypt it and send to another DUT, where packets are
+ decrypted and sent back to TG. Measure successful transmit rate, throughput
+ NDR/PDR with MLR search is {{ "enabled" if mlr_search else "disabled" }}, latency.
+
+scenarios:
+{% for worker_thread in worker_threads %}
+-
+ type: NSPerf
+ traffic_profile: ../../traffic_profiles/ipv4_throughput_latency_vpp.yaml
+ extra_args:
+ vports: {{ vports }}
+ topology: vpp-tg-topology-scale-up.yaml
+ nodes:
+ tg__0: trafficgen.yardstick
+ vnf__0: vnf0.yardstick
+ vnf__1: vnf1.yardstick
+ options:
+ traffic_type: 4
+ rfc2544:
+ allowed_drop_rate: {{ tolerance_low }} - {{ tolerance_high }}
+ framesize:
+ uplink: {64B: 28, 570B: 16, 1518B: 4}
+ downlink: {64B: 28, 570B: 16, 1518B: 4}
+ flow:
+ src_ip:
+ - '10.0.0.0-10.0.0.100'
+ dst_ip:
+ - '20.0.0.0-20.0.0.100'
+ count: {{ flow_count }}
+ vnf__0:
+ collectd:
+ interval: 1
+ # Crypto device type. Type: string - *Example:* HW_cryptodev | SW_cryptodev
+ # Number of RX queues, default value: ${None}. Type: integer
+ vnf_config: {crypto_type: 'HW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ vnf__1:
+ collectd:
+ interval: 1
+ vnf_config: {crypto_type: 'HW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ tg__0:
+ collectd:
+ interval: 1
+ queues_per_port: 7
+ vpp_config:
+ # Number of tunnels
+ tunnels: {{ tunnels }}
+ # Encryption algorithms - Integrity algorithm. Type: string
+ # Example: aes-gcm | cbc-sha1
+ crypto_algorithms: 'aes-gcm'
+{% if mlr_search %}
+ # Maximum Frame Rate depend on Ethernet Link Speed and Frame Size
+ # for a 10 Gb/s Ethernet link and IMIX packet size,
+ # maximum rate = 10*10^9/(((28*64+16*570+4*1518)/48+8+12)*8)
+ max_rate: 3351206
+{% endif %}
+ runner:
+ type: Duration
+ duration: 500
+{% endfor %}
+
+context:
+ type: Node
+ name: yardstick
+ nfvi_type: baremetal
+ file: /etc/yardstick/nodes/vpp-baremetal-{{ vports }}.yaml \ No newline at end of file
diff --git a/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_aesgcm_trex.yaml b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_aesgcm_trex.yaml
new file mode 100644
index 000000000..84a7fe61b
--- /dev/null
+++ b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_aesgcm_trex.yaml
@@ -0,0 +1,96 @@
+# Copyright (c) 2019 Viosoft Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{% set mlr_search = mlr_search or false %}
+{% set vports = vports or 2 %}
+{% set tolerance_low = tolerance_low or 0.0 %}
+{% set tolerance_high = tolerance_high or 0.005 %}
+{% set frame_size = frame_size or 64 %}
+{% set tunnels = tunnels or 1 %}
+{% set flow_count = flow_count or 1 %}
+{% set worker_threads = worker_threads or [1] %}
+---
+schema: yardstick:task:0.1
+description: >
+ This is the VPP IPSec performance tests based on the Data Plane Development
+ Kit (DPDK) Cryptodev framework. DUT1 and DUT2 are configured with DPDK HW
+ cryptodev devices and {{ tunnels }} IPsec tunnels between them. DUTs get
+ IPv4 traffic from TG with {{ frame_size }}B packet size and number of flows
+ is {{ flow_count }}, encrypt it and send to another DUT, where packets are
+ decrypted and sent back to TG. Measure successful transmit rate, throughput
+ NDR/PDR with MLR search is {{ "enabled" if mlr_search else "disabled" }}, latency.
+
+scenarios:
+{% for worker_thread in worker_threads %}
+-
+ type: NSPerf
+ traffic_profile: ../../traffic_profiles/ipv4_throughput_latency_vpp.yaml
+ extra_args:
+ vports: {{ vports }}
+ topology: vpp-tg-topology-scale-up.yaml
+ nodes:
+ tg__0: trafficgen.yardstick
+ vnf__0: vnf0.yardstick
+ vnf__1: vnf1.yardstick
+ options:
+ traffic_type: 4
+ rfc2544:
+ allowed_drop_rate: {{ tolerance_low }} - {{ tolerance_high }}
+ framesize:
+ uplink: {'{{ frame_size }}B': 100}
+ downlink: {'{{ frame_size }}B': 100}
+ flow:
+ src_ip:
+ - '10.0.0.0-10.0.0.100'
+ dst_ip:
+ - '20.0.0.0-20.0.0.100'
+ count: {{ flow_count }}
+ vnf__0:
+ collectd:
+ interval: 1
+ # Crypto device type. Type: string - *Example:* HW_cryptodev | SW_cryptodev
+ # Number of RX queues, default value: ${None}. Type: integer
+ vnf_config: {crypto_type: 'HW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ vnf__1:
+ collectd:
+ interval: 1
+ vnf_config: {crypto_type: 'HW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ tg__0:
+ collectd:
+ interval: 1
+ queues_per_port: 7
+ vpp_config:
+ # Number of tunnels
+ tunnels: {{ tunnels }}
+ # Encryption algorithms - Integrity algorithm. Type: string
+ # Example: aes-gcm | cbc-sha1
+ crypto_algorithms: 'aes-gcm'
+{% if mlr_search %}
+ # Maximum Frame Rate depend on Ethernet Link Speed and Frame Size
+ # for a 10 Gb/s Ethernet link and 64 bytes,
+ # maximum rate = 10*10^9/((64+8+12)*8)
+ max_rate: {{ (10 * 10 ** 9 / ((frame_size + 8 + 12) * 8)) | int }}
+{% endif %}
+ runner:
+ type: Duration
+ duration: 500
+{% endfor %}
+
+context:
+ type: Node
+ name: yardstick
+ nfvi_type: baremetal
+ file: /etc/yardstick/nodes/vpp-baremetal-{{ vports }}.yaml \ No newline at end of file
diff --git a/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_cbcsha1_IMIX_trex.yaml b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_cbcsha1_IMIX_trex.yaml
new file mode 100644
index 000000000..07afe809e
--- /dev/null
+++ b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_cbcsha1_IMIX_trex.yaml
@@ -0,0 +1,95 @@
+# Copyright (c) 2019 Viosoft Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{% set mlr_search = mlr_search or false %}
+{% set vports = vports or 2 %}
+{% set tolerance_low = tolerance_low or 0.0 %}
+{% set tolerance_high = tolerance_high or 0.005 %}
+{% set tunnels = tunnels or 1 %}
+{% set flow_count = flow_count or 1 %}
+{% set worker_threads = worker_threads or [1] %}
+---
+schema: yardstick:task:0.1
+description: >
+ This is the VPP IPSec performance tests based on the Data Plane Development
+ Kit (DPDK) Cryptodev framework. DUT1 and DUT2 are configured with DPDK HW
+ cryptodev devices and {{ tunnels }} IPsec tunnels between them. DUTs get
+ IPv4 traffic from TG with IMIX packet size and number of flows is
+ {{ flow_count }}, encrypt it and send to another DUT, where packets are
+ decrypted and sent back to TG. Measure successful transmit rate, throughput
+ NDR/PDR with MLR search is {{ "enabled" if mlr_search else "disabled" }}, latency.
+
+scenarios:
+{% for worker_thread in worker_threads %}
+-
+ type: NSPerf
+ traffic_profile: ../../traffic_profiles/ipv4_throughput_latency_vpp.yaml
+ extra_args:
+ vports: {{ vports }}
+ topology: vpp-tg-topology-scale-up.yaml
+ nodes:
+ tg__0: trafficgen.yardstick
+ vnf__0: vnf0.yardstick
+ vnf__1: vnf1.yardstick
+ options:
+ traffic_type: 4
+ rfc2544:
+ allowed_drop_rate: {{ tolerance_low }} - {{ tolerance_high }}
+ framesize:
+ uplink: {64B: 28, 570B: 16, 1518B: 4}
+ downlink: {64B: 28, 570B: 16, 1518B: 4}
+ flow:
+ src_ip:
+ - '10.0.0.0-10.0.0.100'
+ dst_ip:
+ - '20.0.0.0-20.0.0.100'
+ count: {{ flow_count }}
+ vnf__0:
+ collectd:
+ interval: 1
+ # Crypto device type. Type: string - *Example:* HW_cryptodev | SW_cryptodev
+ # Number of RX queues, default value: ${None}. Type: integer
+ vnf_config: {crypto_type: 'HW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ vnf__1:
+ collectd:
+ interval: 1
+ vnf_config: {crypto_type: 'HW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ tg__0:
+ collectd:
+ interval: 1
+ queues_per_port: 7
+ vpp_config:
+ # Number of tunnels
+ tunnels: {{ tunnels }}
+ # Encryption algorithms - Integrity algorithm. Type: string
+ # Example: aes-gcm | cbc-sha1
+ crypto_algorithms: 'cbc-sha1'
+{% if mlr_search %}
+ # Maximum Frame Rate depend on Ethernet Link Speed and Frame Size
+ # for a 10 Gb/s Ethernet link and IMIX packet size,
+ # maximum rate = 10*10^9/(((28*64+16*570+4*1518)/48+8+12)*8)
+ max_rate: 3351206
+{% endif %}
+ runner:
+ type: Duration
+ duration: 500
+{% endfor %}
+
+context:
+ type: Node
+ name: yardstick
+ nfvi_type: baremetal
+ file: /etc/yardstick/nodes/vpp-baremetal-{{ vports }}.yaml \ No newline at end of file
diff --git a/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_cbcsha1_trex.yaml b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_cbcsha1_trex.yaml
new file mode 100644
index 000000000..9e210aeed
--- /dev/null
+++ b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_hw_cbcsha1_trex.yaml
@@ -0,0 +1,96 @@
+# Copyright (c) 2019 Viosoft Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{% set mlr_search = mlr_search or false %}
+{% set vports = vports or 2 %}
+{% set tolerance_low = tolerance_low or 0.0 %}
+{% set tolerance_high = tolerance_high or 0.005 %}
+{% set frame_size = frame_size or 64 %}
+{% set tunnels = tunnels or 1 %}
+{% set flow_count = flow_count or 1 %}
+{% set worker_threads = worker_threads or [1] %}
+---
+schema: yardstick:task:0.1
+description: >
+ This is the VPP IPSec performance tests based on the Data Plane Development
+ Kit (DPDK) Cryptodev framework. DUT1 and DUT2 are configured with DPDK HW
+ cryptodev devices and {{ tunnels }} IPsec tunnels between them. DUTs get
+ IPv4 traffic from TG with {{ frame_size }}B packet size and number of flows
+ is {{ flow_count }}, encrypt it and send to another DUT, where packets are
+ decrypted and sent back to TG. Measure successful transmit rate, throughput
+ NDR/PDR with MLR search is {{ "enabled" if mlr_search else "disabled" }}, latency.
+
+scenarios:
+{% for worker_thread in worker_threads %}
+-
+ type: NSPerf
+ traffic_profile: ../../traffic_profiles/ipv4_throughput_latency_vpp.yaml
+ extra_args:
+ vports: {{ vports }}
+ topology: vpp-tg-topology-scale-up.yaml
+ nodes:
+ tg__0: trafficgen.yardstick
+ vnf__0: vnf0.yardstick
+ vnf__1: vnf1.yardstick
+ options:
+ traffic_type: 4
+ rfc2544:
+ allowed_drop_rate: {{ tolerance_low }} - {{ tolerance_high }}
+ framesize:
+ uplink: {'{{ frame_size }}B': 100}
+ downlink: {'{{ frame_size }}B': 100}
+ flow:
+ src_ip:
+ - '10.0.0.0-10.0.0.100'
+ dst_ip:
+ - '20.0.0.0-20.0.0.100'
+ count: {{ flow_count }}
+ vnf__0:
+ collectd:
+ interval: 1
+ # Crypto device type. Type: string - *Example:* HW_cryptodev | SW_cryptodev
+ # Number of RX queues, default value: ${None}. Type: integer
+ vnf_config: {crypto_type: 'HW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ vnf__1:
+ collectd:
+ interval: 1
+ vnf_config: {crypto_type: 'HW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ tg__0:
+ collectd:
+ interval: 1
+ queues_per_port: 7
+ vpp_config:
+ # Number of tunnels
+ tunnels: {{ tunnels }}
+ # Encryption algorithms - Integrity algorithm. Type: string
+ # Example: aes-gcm | cbc-sha1
+ crypto_algorithms: 'cbc-sha1'
+{% if mlr_search %}
+ # Maximum Frame Rate depend on Ethernet Link Speed and Frame Size
+ # for a 10 Gb/s Ethernet link and 64 bytes,
+ # maximum rate = 10*10^9/((64+8+12)*8)
+ max_rate: {{ (10 * 10 ** 9 / ((frame_size + 8 + 12) * 8)) | int }}
+{% endif %}
+ runner:
+ type: Duration
+ duration: 500
+{% endfor %}
+
+context:
+ type: Node
+ name: yardstick
+ nfvi_type: baremetal
+ file: /etc/yardstick/nodes/vpp-baremetal-{{ vports }}.yaml \ No newline at end of file
diff --git a/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_aesgcm_IMIX_trex.yaml b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_aesgcm_IMIX_trex.yaml
new file mode 100644
index 000000000..ac7fceef6
--- /dev/null
+++ b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_aesgcm_IMIX_trex.yaml
@@ -0,0 +1,95 @@
+# Copyright (c) 2019 Viosoft Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{% set mlr_search = mlr_search or false %}
+{% set vports = vports or 2 %}
+{% set tolerance_low = tolerance_low or 0.0 %}
+{% set tolerance_high = tolerance_high or 0.005 %}
+{% set tunnels = tunnels or 1 %}
+{% set flow_count = flow_count or 1 %}
+{% set worker_threads = worker_threads or [1] %}
+---
+schema: yardstick:task:0.1
+description: >
+ This is the VPP IPSec performance tests based on the Data Plane Development
+ Kit (DPDK) Cryptodev framework. DUT1 and DUT2 are configured with DPDK SW
+ cryptodev devices and {{ tunnels }} IPsec tunnels between them. DUTs get
+ IPv4 traffic from TG with IMIX packet size and number of flows is
+ {{ flow_count }}, encrypt it and send to another DUT, where packets are
+ decrypted and sent back to TG. Measure successful transmit rate, throughput
+ NDR/PDR with MLR search is {{ "enabled" if mlr_search else "disabled" }}, latency.
+
+scenarios:
+{% for worker_thread in worker_threads %}
+-
+ type: NSPerf
+ traffic_profile: ../../traffic_profiles/ipv4_throughput_latency_vpp.yaml
+ extra_args:
+ vports: {{ vports }}
+ topology: vpp-tg-topology-scale-up.yaml
+ nodes:
+ tg__0: trafficgen.yardstick
+ vnf__0: vnf0.yardstick
+ vnf__1: vnf1.yardstick
+ options:
+ traffic_type: 4
+ rfc2544:
+ allowed_drop_rate: {{ tolerance_low }} - {{ tolerance_high }}
+ framesize:
+ uplink: {64B: 28, 570B: 16, 1518B: 4}
+ downlink: {64B: 28, 570B: 16, 1518B: 4}
+ flow:
+ src_ip:
+ - '10.0.0.0-10.0.0.100'
+ dst_ip:
+ - '20.0.0.0-20.0.0.100'
+ count: {{ flow_count }}
+ vnf__0:
+ collectd:
+ interval: 1
+ # Crypto device type. Type: string - *Example:* HW_cryptodev | SW_cryptodev
+ # Number of RX queues, default value: ${None}. Type: integer
+ vnf_config: {crypto_type: 'SW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ vnf__1:
+ collectd:
+ interval: 1
+ vnf_config: {crypto_type: 'SW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ tg__0:
+ collectd:
+ interval: 1
+ queues_per_port: 7
+ vpp_config:
+ # Number of tunnels
+ tunnels: {{ tunnels }}
+ # Encryption algorithms - Integrity algorithm. Type: string
+ # Example: aes-gcm | cbc-sha1
+ crypto_algorithms: 'aes-gcm'
+{% if mlr_search %}
+ # Maximum Frame Rate depend on Ethernet Link Speed and Frame Size
+ # for a 10 Gb/s Ethernet link and IMIX packet size,
+ # maximum rate = 10*10^9/(((28*64+16*570+4*1518)/48+8+12)*8)
+ max_rate: 3351206
+{% endif %}
+ runner:
+ type: Duration
+ duration: 500
+{% endfor %}
+
+context:
+ type: Node
+ name: yardstick
+ nfvi_type: baremetal
+ file: /etc/yardstick/nodes/vpp-baremetal-{{ vports }}.yaml \ No newline at end of file
diff --git a/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_aesgcm_trex.yaml b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_aesgcm_trex.yaml
index 7d1f866d5..82f27112d 100644
--- a/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_aesgcm_trex.yaml
+++ b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_aesgcm_trex.yaml
@@ -12,6 +12,7 @@
# See the License for the specific language governing permissions and
# limitations under the License.
+{% set mlr_search = mlr_search or false %}
{% set vports = vports or 2 %}
{% set tolerance_low = tolerance_low or 0.0 %}
{% set tolerance_high = tolerance_high or 0.005 %}
@@ -22,13 +23,13 @@
---
schema: yardstick:task:0.1
description: >
- This is the VPP IPSec performance tests based on the Data Plane
- Development Kit (DPDK) Cryptodev framework. DUT1 and DUT2 are configured
- with DPDK SW cryptodev devices and {{ tunnels }} IPsec tunnels between
- them. DUTs get IPv4 traffic from TG with {{ frame_size }}B packet size
- and number of flows is {{ flow_count }}, encrypt it and send to another
- DUT, where packets are decrypted and sent back to TG. Measure successful
- transmit rate, throughput, latency.
+ This is the VPP IPSec performance tests based on the Data Plane Development
+ Kit (DPDK) Cryptodev framework. DUT1 and DUT2 are configured with DPDK SW
+ cryptodev devices and {{ tunnels }} IPsec tunnels between them. DUTs get
+ IPv4 traffic from TG with {{ frame_size }}B packet size and number of flows
+ is {{ flow_count }}, encrypt it and send to another DUT, where packets are
+ decrypted and sent back to TG. Measure successful transmit rate, throughput
+ NDR/PDR with MLR search is {{ "enabled" if mlr_search else "disabled" }}, latency.
scenarios:
{% for worker_thread in worker_threads %}
@@ -77,6 +78,12 @@ scenarios:
# Encryption algorithms - Integrity algorithm. Type: string
# Example: aes-gcm | cbc-sha1
crypto_algorithms: 'aes-gcm'
+{% if mlr_search %}
+ # Maximum Frame Rate depend on Ethernet Link Speed and Frame Size
+ # for a 10 Gb/s Ethernet link and 64 bytes,
+ # maximum rate = 10*10^9/((64+8+12)*8)
+ max_rate: {{ (10 * 10 ** 9 / ((frame_size + 8 + 12) * 8)) | int }}
+{% endif %}
runner:
type: Duration
duration: 500
diff --git a/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_cbcsha1_IMIX_trex.yaml b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_cbcsha1_IMIX_trex.yaml
new file mode 100644
index 000000000..d3bc14a97
--- /dev/null
+++ b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_cbcsha1_IMIX_trex.yaml
@@ -0,0 +1,95 @@
+# Copyright (c) 2019 Viosoft Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{% set mlr_search = mlr_search or false %}
+{% set vports = vports or 2 %}
+{% set tolerance_low = tolerance_low or 0.0 %}
+{% set tolerance_high = tolerance_high or 0.005 %}
+{% set tunnels = tunnels or 1 %}
+{% set flow_count = flow_count or 1 %}
+{% set worker_threads = worker_threads or [1] %}
+---
+schema: yardstick:task:0.1
+description: >
+ This is the VPP IPSec performance tests based on the Data Plane Development
+ Kit (DPDK) Cryptodev framework. DUT1 and DUT2 are configured with DPDK SW
+ cryptodev devices and {{ tunnels }} IPsec tunnels between them. DUTs get
+ IPv4 traffic from TG with IMIX packet size and number of flows is
+ {{ flow_count }}, encrypt it and send to another DUT, where packets are
+ decrypted and sent back to TG. Measure successful transmit rate, throughput
+ NDR/PDR with MLR search is {{ "enabled" if mlr_search else "disabled" }}, latency.
+
+scenarios:
+{% for worker_thread in worker_threads %}
+-
+ type: NSPerf
+ traffic_profile: ../../traffic_profiles/ipv4_throughput_latency_vpp.yaml
+ extra_args:
+ vports: {{ vports }}
+ topology: vpp-tg-topology-scale-up.yaml
+ nodes:
+ tg__0: trafficgen.yardstick
+ vnf__0: vnf0.yardstick
+ vnf__1: vnf1.yardstick
+ options:
+ traffic_type: 4
+ rfc2544:
+ allowed_drop_rate: {{ tolerance_low }} - {{ tolerance_high }}
+ framesize:
+ uplink: {64B: 28, 570B: 16, 1518B: 4}
+ downlink: {64B: 28, 570B: 16, 1518B: 4}
+ flow:
+ src_ip:
+ - '10.0.0.0-10.0.0.100'
+ dst_ip:
+ - '20.0.0.0-20.0.0.100'
+ count: {{ flow_count }}
+ vnf__0:
+ collectd:
+ interval: 1
+ # Crypto device type. Type: string - *Example:* HW_cryptodev | SW_cryptodev
+ # Number of RX queues, default value: ${None}. Type: integer
+ vnf_config: {crypto_type: 'SW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ vnf__1:
+ collectd:
+ interval: 1
+ vnf_config: {crypto_type: 'SW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ tg__0:
+ collectd:
+ interval: 1
+ queues_per_port: 7
+ vpp_config:
+ # Number of tunnels
+ tunnels: {{ tunnels }}
+ # Encryption algorithms - Integrity algorithm. Type: string
+ # Example: aes-gcm | cbc-sha1
+ crypto_algorithms: 'cbc-sha1'
+{% if mlr_search %}
+ # Maximum Frame Rate depend on Ethernet Link Speed and Frame Size
+ # for a 10 Gb/s Ethernet link and IMIX packet size,
+ # maximum rate = 10*10^9/(((28*64+16*570+4*1518)/48+8+12)*8)
+ max_rate: 3351206
+{% endif %}
+ runner:
+ type: Duration
+ duration: 500
+{% endfor %}
+
+context:
+ type: Node
+ name: yardstick
+ nfvi_type: baremetal
+ file: /etc/yardstick/nodes/vpp-baremetal-{{ vports }}.yaml \ No newline at end of file
diff --git a/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_cbcsha1_trex.yaml b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_cbcsha1_trex.yaml
new file mode 100644
index 000000000..a70aa49f7
--- /dev/null
+++ b/samples/vnf_samples/nsut/ipsec/tc_baremetal_rfc2544_ipv4_sw_cbcsha1_trex.yaml
@@ -0,0 +1,96 @@
+# Copyright (c) 2019 Viosoft Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+{% set mlr_search = mlr_search or false %}
+{% set vports = vports or 2 %}
+{% set tolerance_low = tolerance_low or 0.0 %}
+{% set tolerance_high = tolerance_high or 0.005 %}
+{% set frame_size = frame_size or 64 %}
+{% set tunnels = tunnels or 1 %}
+{% set flow_count = flow_count or 1 %}
+{% set worker_threads = worker_threads or [1] %}
+---
+schema: yardstick:task:0.1
+description: >
+ This is the VPP IPSec performance tests based on the Data Plane Development
+ Kit (DPDK) Cryptodev framework. DUT1 and DUT2 are configured with DPDK SW
+ cryptodev devices and {{ tunnels }} IPsec tunnels between them. DUTs get
+ IPv4 traffic from TG with {{ frame_size }}B packet size and number of flows
+ is {{ flow_count }}, encrypt it and send to another DUT, where packets are
+ decrypted and sent back to TG. Measure successful transmit rate, throughput
+ NDR/PDR with MLR search is {{ "enabled" if mlr_search else "disabled" }}, latency.
+
+scenarios:
+{% for worker_thread in worker_threads %}
+-
+ type: NSPerf
+ traffic_profile: ../../traffic_profiles/ipv4_throughput_latency_vpp.yaml
+ extra_args:
+ vports: {{ vports }}
+ topology: vpp-tg-topology-scale-up.yaml
+ nodes:
+ tg__0: trafficgen.yardstick
+ vnf__0: vnf0.yardstick
+ vnf__1: vnf1.yardstick
+ options:
+ traffic_type: 4
+ rfc2544:
+ allowed_drop_rate: {{ tolerance_low }} - {{ tolerance_high }}
+ framesize:
+ uplink: {'{{ frame_size }}B': 100}
+ downlink: {'{{ frame_size }}B': 100}
+ flow:
+ src_ip:
+ - '10.0.0.0-10.0.0.100'
+ dst_ip:
+ - '20.0.0.0-20.0.0.100'
+ count: {{ flow_count }}
+ vnf__0:
+ collectd:
+ interval: 1
+ # Crypto device type. Type: string - *Example:* HW_cryptodev | SW_cryptodev
+ # Number of RX queues, default value: ${None}. Type: integer
+ vnf_config: {crypto_type: 'SW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ vnf__1:
+ collectd:
+ interval: 1
+ vnf_config: {crypto_type: 'SW_cryptodev', rxq: 1, worker_config: '1C/1T',
+ worker_threads: {{ worker_thread }}}
+ tg__0:
+ collectd:
+ interval: 1
+ queues_per_port: 7
+ vpp_config:
+ # Number of tunnels
+ tunnels: {{ tunnels }}
+ # Encryption algorithms - Integrity algorithm. Type: string
+ # Example: aes-gcm | cbc-sha1
+ crypto_algorithms: 'cbc-sha1'
+{% if mlr_search %}
+ # Maximum Frame Rate depend on Ethernet Link Speed and Frame Size
+ # for a 10 Gb/s Ethernet link and 64 bytes,
+ # maximum rate = 10*10^9/((64+8+12)*8)
+ max_rate: {{ (10 * 10 ** 9 / ((frame_size + 8 + 12) * 8)) | int }}
+{% endif %}
+ runner:
+ type: Duration
+ duration: 500
+{% endfor %}
+
+context:
+ type: Node
+ name: yardstick
+ nfvi_type: baremetal
+ file: /etc/yardstick/nodes/vpp-baremetal-{{ vports }}.yaml \ No newline at end of file