diff options
Diffstat (limited to 'samples/vnf_samples/nsut/vepc/tc_epc_network_dedicated_bearer_create_landslide.yaml')
| -rw-r--r-- | samples/vnf_samples/nsut/vepc/tc_epc_network_dedicated_bearer_create_landslide.yaml | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/samples/vnf_samples/nsut/vepc/tc_epc_network_dedicated_bearer_create_landslide.yaml b/samples/vnf_samples/nsut/vepc/tc_epc_network_dedicated_bearer_create_landslide.yaml new file mode 100644 index 000000000..65f58bd0d --- /dev/null +++ b/samples/vnf_samples/nsut/vepc/tc_epc_network_dedicated_bearer_create_landslide.yaml @@ -0,0 +1,164 @@ +# Copyright (c) 2018 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +--- +schema: yardstick:task:0.1 +description: > + NW triggered dedicated bearer creation test case. Measure successful dedicated bearers + creation rate, total number of active bearer per server. + +scenarios: +- type: NSPerf + traffic_profile: "../../traffic_profiles/landslide/landslide_dmf_udp.yaml" + session_profile: "../../traffic_profiles/landslide/landslide_session_network_dedicated_bearer.yaml" + topology: "vepc_vnf_topology_landslide.yaml" + nodes: + tg__0: tg__0.traffic_gen + vnf__0: vnf__0.vnf_epc + options: + dmf: + transactionRate: 5 + packetSize: 512 + burstCount: 1 # Applies only to Basic UDP DMF, DataProtocol==udp + test_cases: # test case parameters to apply on session profile + - type: SGW_Node # test type from test session profile + AssociatedPhys: 'eth6' # interface(s) in Node test type to loop traffic back from NetHost + BearerAddrPool: 2001::1 + BearerV4AddrPool: 1.0.0.1 + Sessions: 50000 + UeInitBearerEn: 'false' + DedicatedsPerDefaultBearer: 1 # number of dedicated bearers per default + DefaultBearers: 1 # number of default bearers + FireballEn: 'false' # Fireball settings + + # APN settings (number of APNs and APN's names) + Gtp2ApnNumSpecifiedApns_0: '1' + Gtp2ApnSpecified_0: + array: [dummy.an] + class: Array + + - type: PGW_Node # test type from test session profile + BearerAddrPool: 2001::1 + BearerV4AddrPool: 1.0.0.1 + Sessions: 50000 + DedicatedsPerDefaultBearer: 1 # number of dedicated bearers per default + DefaultBearers: 1 # number of default bearers + FireballEn: 'false' # Fireball settings + + # APN settings (number of APNs and APN's names) + Gtp2ApnNumSpecifiedApns_0: '1' + Gtp2ApnSpecified_0: + class: Array + array: [dummy.an] + + - type: SGW_Nodal # test type from test session profile + StartRate: '1000.0' + DisconnectRate: '1000.0' + Sessions: 50000 + UeInitBearerEn: 'false' + DedicatedsPerDefaultBearer: 1 # number of dedicated bearers per default + DefaultBearers: 1 # number of default bearers + PgwNodeEn: 'false' # Emulate PGW Node + FireballEn: 'false' # Fireball settings + + # APN settings (number of APNs and APN's names) + Gtp2ApnNumSpecifiedApns_0: '1' + Gtp2ApnSpecified_0: + class: Array + array: [dummy.an] + + # Creation delay individually for each dedicated bearer + # Array items specifies timeout between default and dedicated bearers creation + # Array items corresponds to specific dedicated bearer + ConnectBearerDelay: + class: Array + array: ['1'] + + - type: PCRF_Node # test type from test session profile + Sessions: 50000 + DisconnectRate: '1000' + + # Starting IP address + StartingMsIpAddr: 1.0.0.1 + + # APN settings (APN's Names) + TyCcSrvApns: + class: Array + array: [dummy.an] + + # Timer column (in seconds) + # Value specifies timeout after which dedicated bearer will be created + # None-zero timeout corresponds to dedicated bearer, zero timeout - to default bearer + TyCcV4SrvRuleInterval_1: '10' # APN1 dedicated bearer + TyCcV4SrvRuleInterval_2: '0' # APN1 default bearer + + # QoS Class ID + # Name Pattern: TyCcV4SrvCrQci_<RULE_SET_NUM>_<CHAR_RULE_NUM>_<RULE_DEF_NUM> + TyCcV4SrvCrQci_1_1_1: '1' # QCI of dedicated bearer + + # Dedicated bearer Uplink/Downlink Bandwidth settings + # Name Pattern: TyCcV4SrvPrMaxUL_<RULE_SET_NUM>_<CHAR_RULE_NUM>_<RULE_DEF_NUM> + # Name Pattern: TyCcV4SrvPrGuaranteedUplink_<RULE_SET_NUM>_<CHAR_RULE_NUM>_<RULE_DEF_NUM> + TyCcV4SrvPrMaxUL_1_1_1: '300' # Uplink Max Bandwidth + TyCcV4SrvPrMaxDL_1_1_1: '300' # Downlink Max Bandwidth + TyCcV4SrvPrGuaranteedUplink_1_1_1: '300' # Uplink Guaranteed Bandwidth + TyCcV4SrvPrGuaranteedDownlink_1_1_1: '300' # Downlink Guaranteed Bandwidth + + # Dedicated bearer ARP Rules + # Name Pattern: TyCcV4SrvPrArpEn_<RULE_SET_NUM>_<CHAR_RULE_NUM>_<RULE_DEF_NUM> + # Name Pattern: TyCcV4SrvPrArpValue_<RULE_SET_NUM>_<CHAR_RULE_NUM>_<RULE_DEF_NUM> + TyCcV4SrvPrArpEn_1_1_1: 'true' # Enable ARP Rules + TyCcV4SrvPrArpValue_1_1_1: '1' # ARP Value + TyCcV4SrvPrArpPreemptCapEn_1_1_1: 'true' # Enable Pre-emption Capability + TyCcV4SrvPrArpPreemptVulnEn_1_1_1: 'true' # Enable Pre-emption Vulnerability + + # Packet Filter Description + # Name Pattern: + # TyCcV4SrvCrFilter_<RULE_SET_NUM>_<CHAR_RULE_NUM>_<RULE_DEF_NUM>_<FILTER_NUM> + # To explicitly specify protocol number with decimal number, use following naming pattern: + # permit in <PROTOCOL_NUMBER> from + TyCcV4SrvCrFilter_1_1_1_1: permit in 17 from + + # Packet Filter Destination IP + # Name Pattern: + # TyCcV4SrvCrFilterDestIp_<RULE_SET_NUM>_<CHAR_RULE_NUM>_<RULE_DEF_NUM>_<FILTER_NUM> + # Parameter's value specifies filter's destination IP address and remote port range + TyCcV4SrvCrFilterDestIp_1_1_1_1: 0.0.0.0 0-65535 + + # Packet Filter IP Ext + # Name Pattern: + # TyCcV4SrvCrUserIpExt_<RULE_SET_NUM>_<CHAR_RULE_NUM>_<RULE_DEF_NUM>_<FILTER_NUM> + # Parameter's value specifies filter's local port range + TyCcV4SrvCrUserIpExt_1_1_1_1: 0-65535 + + # Packet Filter Flow Direction + # Name Pattern: + # TyCcV4SrvCrFilterDirection_<RULE_SET_NUM>_<CHAR_RULE_NUM>_<RULE_DEF_NUM>_<FILTER_NUM> + TyCcV4SrvCrFilterDirection_1_1_1_1: '3' # Bi-Directional + + # Diameter Transmission Protocol + TyCcSrvTcpProtocol: '1' # 0 - TCP, 1 - SCTP + + runner: + type: Duration + duration: 600 + interval: 5 + +contexts: +- name: traffic_gen + type: Node + file: /etc/yardstick/nodes/pod_landslide_network_dedicated.yaml +- name: vnf_epc + type: Node + file: /etc/yardstick/nodes/pod_vepc_sut.yaml |