diff options
Diffstat (limited to 'samples/vnf_samples/nsut/bng/tc_bng_pppoe_rfc2544_ixia_IMIX_scale_up.yaml')
| -rw-r--r-- | samples/vnf_samples/nsut/bng/tc_bng_pppoe_rfc2544_ixia_IMIX_scale_up.yaml | 100 |
1 files changed, 100 insertions, 0 deletions
diff --git a/samples/vnf_samples/nsut/bng/tc_bng_pppoe_rfc2544_ixia_IMIX_scale_up.yaml b/samples/vnf_samples/nsut/bng/tc_bng_pppoe_rfc2544_ixia_IMIX_scale_up.yaml new file mode 100644 index 000000000..882d3e28e --- /dev/null +++ b/samples/vnf_samples/nsut/bng/tc_bng_pppoe_rfc2544_ixia_IMIX_scale_up.yaml @@ -0,0 +1,100 @@ +# Copyright (c) 2018-2019 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +--- +{% set sessions_per_port = sessions_per_port or 4000 %} +{% set sessions_per_svlan = sessions_per_svlan or 1000 %} +{% set duration = duration or 60 %} +{% set vports = vports or 2 %} +{% set tolerance_low = tolerance_low or 0.0001 %} +{% set tolerance_high = tolerance_high or 0.0001 %} +schema: yardstick:task:0.1 +description: > + vBNG RFC2544 test case with QoS base line without link congestion. + Test case creates PPPoE sessions, runs traffic on maximum throughput + and measures packets drop rate on all ports for each priority flow. +scenarios: +- type: NSPerf + traffic_profile: "../../traffic_profiles/ixia_ipv4_latency_vbng_scale_up.yaml" + topology: "../agnostic/agnostic_vnf_topology_ixia_{{ vports }}ports.yaml" + ixia_config: IxiaPppoeClient + extra_args: + access_vports_num: {{ vports|int / 2 }} + nodes: + tg__0: trafficgen_0.yardstick + vnf__0: vnf_0.yardstick + options: + duration: {{ duration }} + pppoe_client: # access network + sessions_per_port: {{ sessions_per_port }} + sessions_per_svlan: {{ sessions_per_svlan }} + pap_user: 'pppoe_user' + pap_password: '' + ip: +{% for vnf_num in range(0, vports|int, 2) %} + - {'tg__0': 'xe{{ vnf_num }}'} +{% endfor %} + s_vlan: 100 # s-vlan applies per device group + c_vlan: 1000 # c-vlan applies per subscriber + ipv4_client: # core network + sessions_per_port: 1 + sessions_per_vlan: 1 + ip: +{% for vnf_num in range(1, vports|int, 2) %} + - {'tg__0': 'xe{{ vnf_num }}'} +{% endfor %} + gateway_ip: +{% for vnf_num in range(1, vports|int, 2) %} + - {'vnf__0': 'xe{{ vnf_num }}'} +{% endfor %} + vlan: 101 + bgp: + bgp_type: external + dut_ip: 10.0.0.3 + as_number: 65000 + framesize: + uplink: {70B: 33, 940B: 33, 1470B: 34} + downlink: {68B: 3, 932B: 1, 1470B: 96} + priority: + # 0 - (000) Routine + # 1 - (001) Priority + # 2 - (010) Immediate + # 3 - (011) Flash + # 4 - (100) Flash Override + # 5 - (101) CRITIC/ECP + # 6 - (110) Internetwork Control + # 7 - (111) Network Control + tos: {precedence: [0, 4, 7]} + flow: + src_ip: +{% for vnf_num in range(0, vports|int, 2) %} + - {'tg__0': 'xe{{ vnf_num }}'} +{% endfor %} + dst_ip: +{% for vnf_num in range(1, vports|int, 2) %} + - {'tg__0': 'xe{{ vnf_num }}'} +{% endfor %} + count: 1 + traffic_type: 4 + rfc2544: + allowed_drop_rate: "{{ tolerance_low }} - {{ tolerance_high }}" + runner: + type: Iteration + iterations: 10 + interval: {{ duration + 15 }} +context: + type: Node + name: yardstick + nfvi_type: baremetal + file: /etc/yardstick/nodes/pod_ixia.yaml |