Age | Commit message (Collapse) | Author | Files | Lines |
|
Support for burst traffic type was added into T-Rex. This
traffic type is useful for tests, where a limited number
of frames should be sent through DUT.
JIRA: VSPERF-562
Change-Id: I03b7150e66a0210cce91b20c751b8624c16f951b
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Sridhar Rao <sridhar.rao@spirent.com>
Reviewed-by: Richard Elias <richardx.elias@intel.com>
|
|
Traffic generated by traffic generator is based on default
values and their modifications specific to particular testing
scenario. Traffic default values were defined inside VSPERF
code and it was not possible to change them. This patch introduces
new TRAFFIC dictionary inside 03_traffic.conf. Thus user can
modify any of TRAFFIC values either in configuration file
or by CLI or by 'Parameters' section of testcase definition.
Following CLI options were obsoleted by this patch:
'bidirectional', 'traffic_type', 'iload', 'multistream',
'stream_type' and 'pre-installed_flows'
Following CLI option was renamed to be consistent with other options:
'tunnel_type' => 'TUNNEL_TYPE'
Following sections of testcase definition were obsoleted:
"Traffic Type", "biDirectional", "MultiStream", "Stream Type",
"Pre-installed Flows", "Flow Type" and "iLoad"
New TRAFFIC dictionary should be used instead of old CLI options
and old testcase definition sections. Testcase definitons,
yardstick sample testcases and documentation were updated to reflect
configuration changes.
JIRA: VSPERF-433
Change-Id: I03a388c766491d5688e715f6d7b51e8e0377ec27
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: Bill Michalowski <bmichalo@redhat.com>
Reviewed-by: Antonio Fischetti <antonio.fischetti@intel.com>
Reviewed-by: <sridhar.rao@spirent.com>
|
|
VSPERF framework was updated to follow RFC2544 definition
of 'test' and 'trial' terms. Test parameter 'rfc2544_trials'
was replaced by new parameter 'rfc2544_tests'.
Both code and documentation were updated to reflect
these changes.
JIRA: VSPERF-300
Change-Id: I144a28359fd06394f1f87ef324458bafd5aad45f
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
Reviewed-by: <bmichalo@redhat.com>
|
|
Both documentation and traffic generator API are updated
to match current code logic. Additional default values
are added into TRAFFIC_DEFAULTS dictionary. Constructor
of TestCase class uses default values from TRAFFIC_DEFAULTS
instead of magic numbers.
Change-Id: Id2f4983945e4b123adddbc9a2a832f4a735b27f6
JIRA: VSPERF-253
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Al Morton <acmorton@att.com>
Reviewed-by: Christian Trautman <ctrautma@redhat.com>
|
|
Allow a configurable duration for all send functions.
JIRA: VSPERF-125
Change-Id: I7c6f5d136a7d7100e3990f7fdc00121b07081a80
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Radek Zetik <radekx.zetik@intel.com>
|
|
Two sample contionous stream testcaes were introduced for PVP and PVVP
scenarios. Required frame rate percentage can be specified either by
tetcase configuration option "iLoad" or by command line option "iload".
Command line option take precendece to testcase option. By default 100%
linerate is used if not specified otherwise.
Change-Id: I95f7ae6081377a4c99ce70fc7504b6b542f9260b
JIRA: VSPERF-95
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Reviewed-by: Gene Snider <eugene.snider@huawei.com>
Reviewed-by: Al Morton <acmorton@att.com>
|
|
This test adds a multistream config item,
taking the required number of flows to setup in the traffic,
to the existing testcase and then running the standard
2544 Throughput test. The config is plumbed through
from the 01_testcase.conf via ITraffic to the IxNet.
01_testcase.conf contains new parameter MultiStream
for 2544 Throughput test.
JIRA: VSPERF-19
Change-Id: I12e0e76a5f54dc13b854f3a65f3a4a0fe90ff885
Signed-off-by: Radek Zetik <radekx.zetik@intel.com>
Signed-off-by: Martin Klozik <martinx.klozik@intel.com>
Reviewed-by: Billy O Mahony <billy.o.mahony@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Gurpreet Singh <gurpreet.singh@spirent.com>
Reviewed-by: Tv Rao <tv.rao@freescale.com>
|
|
This commit adds the vSwitch Integration Test Framework whose
design, based off TOIT, is outlined in the HLD previously made
availiable to the community for review.
The design of this framework allows developers to add different
implementations of components, specifically vSwitches, Traffic
Generators, Metrics Collectors and VNFs, easily.
The goal of this design is that all testcases should run regardless of
what is "under the hood".
This commit adds support for running the framework for a phy to phy
RFC2544 testcase only. More testcases will be added by the community.
vSwitches supported at this time:
* Intel DPDK (r) accelerated OpenvSwitch
Traffic Generators supported at this time:
* IxNet - IxNetwork Implementation
* Ixia - IxExplorer Implementation
* Dummy - Manual Implementation
Metrics Collectors supported at this time:
* Linux Metrics
No VNFs are supported at this time but the framework outlines how they
should be integrated and provides APIs for them to adhere to.
JIRA: VSPERF-27
Change-Id: I312e1a1199487ffee8f824be06cd97d4f793eee0
Signed-off-by: Stephen Finucane <Stephen.Finucane@intel.com>
Signed-off-by: Meghan Halton <Meghan.Halton@intel.com>
Signed-off-by: Christopher Nolan <Christopher.Nolan@intel.com>
Signed-off-by: Maryam Tahhan <Maryam.Tahhan@intel.com>
Signed-off-by: Ciara Loftus <Ciara.Loftus@intel.com>
Signed-off-by: Mark Kavanagh <Mark.B.Kavanagh@intel.com>
Signed-off-by: Cian Ferriter <Cian.Ferriter@intel.com>
Signed-off-by: Timo Puha <TimoX.Puha@intel.com>
Signed-off-by: Billy O'Mahony <billy.o.mahony@intel.com>
Signed-off-by: Michal Weglicki <MichalX.Weglicki@intel.com>
Signed-off-by: Rory Sexton <Rory.Sexton@intel.com>
Signed-off-by: Ian Stokes <Ian.Stokes@intel.com>
Signed-off-by: Kevin Traynor <Kevin.Traynor@intel.com>
Signed-off-by: Dino Simeon Madarang <dino.simeonx.madarang@intel.com>
Reviewed-by: Eugene Snider <Eugene.Snider@huawei.com>
Reviewed-by: Aihua Li <aihua.li@huawei.com>
|