aboutsummaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/configguide/trafficgen.rst6
-rw-r--r--docs/design/trafficgen_integration_guide.rst49
-rwxr-xr-xdocs/userguide/integration.rst2
3 files changed, 47 insertions, 10 deletions
diff --git a/docs/configguide/trafficgen.rst b/docs/configguide/trafficgen.rst
index 2bbe9143..6e7626d8 100644
--- a/docs/configguide/trafficgen.rst
+++ b/docs/configguide/trafficgen.rst
@@ -37,14 +37,16 @@ follows:
'framesize': 64,
'srcmac': '00:00:00:00:00:00',
'dstmac': '00:00:00:00:00:00',
- 'srcport': 3000,
- 'dstport': 3001,
},
'l3': {
'proto': 'tcp',
'srcip': '1.1.1.1',
'dstip': '90.90.90.90',
},
+ 'l4': {
+ 'srcport': 3000,
+ 'dstport': 3001,
+ },
'vlan': {
'enabled': False,
'id': 0,
diff --git a/docs/design/trafficgen_integration_guide.rst b/docs/design/trafficgen_integration_guide.rst
index bea2feff..a30b2d61 100644
--- a/docs/design/trafficgen_integration_guide.rst
+++ b/docs/design/trafficgen_integration_guide.rst
@@ -162,10 +162,10 @@ Example of synchronous interfaces:
.. code-block:: python
def send_rfc2544_throughput(self, traffic=None, trials=3, duration=20,
- lossrate=0.0, multistream=False):
+ lossrate=0.0):
def send_rfc2544_back2back(self, traffic=None, trials=1, duration=20,
lossrate=0.0):
- def send_cont_traffic(self, traffic=None, duration=20, multistream=False):
+ def send_cont_traffic(self, traffic=None, duration=20):
Example of asynchronous interfaces:
@@ -179,17 +179,52 @@ Example of asynchronous interfaces:
lossrate=0.0):
def wait_rfc2544_back2back(self):
- def start_cont_traffic(self, traffic=None, duration=20, multistream=False):
+ def start_cont_traffic(self, traffic=None, duration=20):
def stop_cont_traffic(self):
Description of parameters used by **send**, **start**, **wait** and **stop**
functions:
- * param **trials**: Number of trials to execute
+ * param **traffic**: A dictionary with detailed definition of traffic
+ pattern. It contains following parameters to be implemented by
+ traffic generator.
+
+ Note: Traffic dictionary has also virtual switch related parameters,
+ which are not listed below.
+
+ Note: There are parameters specific to testing of tunnelling protocols,
+ which are discussed in detail at `integration tests userguide`_
+
+ * param **traffic_type**: One of the supported traffic types,
+ e.g. **rfc2544**, **continuous** or **back2back**.
+ * param **frame_rate**: Defines desired percentage of frame
+ rate used during continuous stream tests. It can be set by test
+ parameter iLoad or by CLI parameter iload.
+ * param **bidir**: Specifies if generated traffic will be full-duplex
+ (true) or half-duplex (false).
+ * param **multistream**: Defines number of flows simulated by traffic
+ generator. Value 0 disables MultiStream feature.
+ * param **stream_type**: Stream Type defines ISO OSI network layer
+ used for simulation of multiple streams.
+ Supported values:
+
+ * **L2** - iteration of destination MAC address
+ * **L3** - iteration of destination IP address
+ * **L4** - iteration of destination port of selected transport protocol
+
+ * param **l2**: A dictionary with data link layer details, e.g. **srcmac**,
+ **dstmac** and **framesize**.
+ * param **l3**: A dictionary with network layer details, e.g. **srcip**,
+ **dstip** and **proto**.
+ * param **l3**: A dictionary with transport layer details, e.g. **srcport**,
+ **dstport**.
+ * param **vlan**: A dictionary with vlan specific parameters,
+ e.g. **priority**, **cfi**, **id** and vlan on/off switch **enabled**.
+
+ * param **trials**: Number of trials to execute.
* param **duration**: Duration of continuous test or per iteration duration
- in case of RFC2544 throughput or back2back traffic types.
+ in case of RFC2544 throughput or back2back traffic types.
* param **lossrate**: Acceptable lossrate percentage.
- * param **multistream**: Enable or disable multistream feature.
Step 6 - passing back results
=============================
@@ -201,3 +236,5 @@ are defined in **ResultsConstants** implemented in
Throughput & Continuous and for Back2Back. The same key names should
be used by all traffic generator implementations.
+.. _integration tests userguide: http://artifacts.opnfv.org/vswitchperf/docs/userguide/integration.html
+
diff --git a/docs/userguide/integration.rst b/docs/userguide/integration.rst
index dfbba14a..6f9621e1 100755
--- a/docs/userguide/integration.rst
+++ b/docs/userguide/integration.rst
@@ -233,8 +233,6 @@ To run GENEVE decapsulation tests:
'inner_srcip': '192.168.0.10',
'inner_dstip': '192.168.240.9',
'inner_proto': 'udp',
- 'inner_srcport': 3000,
- 'inner_dstport': 3001,
}
GENEVE_FRAME_L4 = {'srcport': 6081,
'dstport': 6081,