aboutsummaryrefslogtreecommitdiffstats
path: root/docs/testing
diff options
context:
space:
mode:
authorTrevor Cooper <trevor.cooper@intel.com>2017-03-22 00:49:18 +0000
committerGerrit Code Review <gerrit@opnfv.org>2017-03-22 00:49:18 +0000
commitf56bcee58ec3710b02a0f7639f13d7a8ed903ebf (patch)
treee90758d0f0ad0df6698a144c3052b9f8f0308375 /docs/testing
parenta224f56b6750062078b881606092003eaa9e81eb (diff)
parentf4a955b25a59af2984b0910e5f2cb10a0d1150e5 (diff)
Merge "Revert "Moved doc files to testing document structure"
Diffstat (limited to 'docs/testing')
-rw-r--r--docs/testing/developer/design/LICENSE2
-rw-r--r--docs/testing/developer/design/factory_and_loader.pngbin25586 -> 0 bytes
-rw-r--r--docs/testing/developer/design/traffic_controller.pngbin57868 -> 0 bytes
-rw-r--r--docs/testing/developer/design/trafficgen_integration_guide.rst238
-rw-r--r--docs/testing/developer/design/vsperf.pngbin93029 -> 0 bytes
-rw-r--r--docs/testing/developer/design/vswitchperf_design.rst870
-rw-r--r--docs/testing/developer/requirements/LICENSE2
-rw-r--r--docs/testing/developer/requirements/ietf_draft/LICENSE12
-rw-r--r--docs/testing/developer/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-00.xml1016
-rw-r--r--docs/testing/developer/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-01.xml1027
-rw-r--r--docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-00.xml964
-rw-r--r--docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-01.xml1016
-rw-r--r--docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-02.xml1016
-rw-r--r--docs/testing/developer/requirements/vm2vm_alternative_benchmark.pngbin104244 -> 0 bytes
-rw-r--r--docs/testing/developer/requirements/vm2vm_benchmark.pngbin80797 -> 0 bytes
-rw-r--r--docs/testing/developer/requirements/vm2vm_hypervisor_benchmark.pngbin122975 -> 0 bytes
-rw-r--r--docs/testing/developer/requirements/vm2vm_virtual_interface_benchmark.pngbin99544 -> 0 bytes
-rw-r--r--docs/testing/developer/requirements/vswitchperf_ltd.rst1712
-rw-r--r--docs/testing/developer/requirements/vswitchperf_ltp.rst1348
-rw-r--r--docs/testing/developer/results/results.rst38
-rw-r--r--docs/testing/developer/results/scenario.rst36
-rw-r--r--docs/testing/user/configguide/LICENSE2
-rw-r--r--docs/testing/user/configguide/TCLServerProperties.pngbin11667 -> 0 bytes
-rw-r--r--docs/testing/user/configguide/installation.rst310
-rw-r--r--docs/testing/user/configguide/trafficgen.rst671
-rw-r--r--docs/testing/user/configguide/upgrade.rst183
-rw-r--r--docs/testing/user/userguide/integration.rst504
-rw-r--r--docs/testing/user/userguide/teststeps.rst667
-rw-r--r--docs/testing/user/userguide/testusage.rst848
-rw-r--r--docs/testing/user/userguide/yardstick.rst250
30 files changed, 0 insertions, 12732 deletions
diff --git a/docs/testing/developer/design/LICENSE b/docs/testing/developer/design/LICENSE
deleted file mode 100644
index 7bc572ce..00000000
--- a/docs/testing/developer/design/LICENSE
+++ /dev/null
@@ -1,2 +0,0 @@
-This work is licensed under a Creative Commons Attribution 4.0 International License.
-http://creativecommons.org/licenses/by/4.0
diff --git a/docs/testing/developer/design/factory_and_loader.png b/docs/testing/developer/design/factory_and_loader.png
deleted file mode 100644
index 290c0af6..00000000
--- a/docs/testing/developer/design/factory_and_loader.png
+++ /dev/null
Binary files differ
diff --git a/docs/testing/developer/design/traffic_controller.png b/docs/testing/developer/design/traffic_controller.png
deleted file mode 100644
index 598296ec..00000000
--- a/docs/testing/developer/design/traffic_controller.png
+++ /dev/null
Binary files differ
diff --git a/docs/testing/developer/design/trafficgen_integration_guide.rst b/docs/testing/developer/design/trafficgen_integration_guide.rst
deleted file mode 100644
index 382cedcb..00000000
--- a/docs/testing/developer/design/trafficgen_integration_guide.rst
+++ /dev/null
@@ -1,238 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-===================================
-Traffic Generator Integration Guide
-===================================
-
-Intended Audience
-=================
-
-This document is intended to aid those who want to integrate new traffic
-generator into the vsperf code. It is expected, that reader has already
-read generic part of :ref:`vsperf-design`.
-
-Let us create a sample traffic generator called **sample_tg**, step by step.
-
-Step 1 - create a directory
-===========================
-
-Implementation of trafficgens is located at tools/pkt_gen/ directory,
-where every implementation has its dedicated sub-directory. It is
-required to create a new directory for new traffic generator
-implementations.
-
-E.g.
-
-.. code-block:: console
-
- $ mkdir tools/pkt_gen/sample_tg
-
-Step 2 - create a trafficgen module
-===================================
-
-Every trafficgen class must inherit from generic **ITrafficGenerator**
-interface class. VSPERF during its initialization scans content of pkt_gen
-directory for all python modules, that inherit from **ITrafficGenerator**. These
-modules are automatically added into the list of supported traffic generators.
-
-Example:
-
-Let us create a draft of tools/pkt_gen/sample_tg/sample_tg.py module.
-
-.. code-block:: python
-
- from tools.pkt_gen import trafficgen
-
- class SampleTG(trafficgen.ITrafficGenerator):
- """
- A sample traffic generator implementation
- """
- pass
-
-VSPERF is immediately aware of the new class:
-
-.. code-block:: console
-
- $ ./vsperf --list-trafficgen
-
-Output should look like:
-
-.. code-block:: console
-
- Classes derived from: ITrafficGenerator
- ======
-
- * Ixia: A wrapper around the IXIA traffic generator.
-
- * IxNet: A wrapper around IXIA IxNetwork applications.
-
- * Dummy: A dummy traffic generator whose data is generated by the user.
-
- * SampleTG: A sample traffic generator implementation
-
- * TestCenter: Spirent TestCenter
-
-
-Step 3 - configuration
-======================
-
-All configuration values, required for correct traffic generator function, are passed
-from VSPERF to the traffic generator in a dictionary. Default values shared among
-all traffic generators are defined in **conf/03_traffic.conf** within **TRAFFIC**
-dictionary. Default values are loaded by **ITrafficGenerator** interface class
-automatically, so it is not needed to load them explicitly. In case that there are
-any traffic generator specific default values, then they should be set within class
-specific **__init__** function.
-
-VSPERF passes test specific configuration within **traffic** dictionary to every
-start and send function. So implementation of these functions must ensure,
-that default values are updated with the testcase specific values. Proper merge
-of values is assured by call of **merge_spec** function from **conf** module.
-
-Example of **merge_spec** usage in **tools/pkt_gen/sample_tg/sample_tg.py** module:
-
-.. code-block:: python
-
- from conf import merge_spec
-
- def start_rfc2544_throughput(self, traffic=None, duration=30):
- self._params = {}
- self._params['traffic'] = self.traffic_defaults.copy()
- if traffic:
- self._params['traffic'] = merge_spec(
- self._params['traffic'], traffic)
-
-
-Step 4 - generic functions
-==========================
-
-There are some generic functions, which every traffic generator should provide.
-Although these functions are mainly optional, at least empty implementation must
-be provided. This is required, so that developer is explicitly aware of these
-functions.
-
-The **connect** function is called from the traffic generator controller from its
-**__enter__** method. This function should assure proper connection initialization
-between DUT and traffic generator. In case, that such implementation is not needed,
-empty implementation is required.
-
-The **disconnect** function should perform clean up of any connection specific
-actions called from the **connect** function.
-
-Example in **tools/pkt_gen/sample_tg/sample_tg.py** module:
-
-.. code-block:: python
-
- def connect(self):
- pass
-
- def disconnect(self):
- pass
-
-.. _step-5-supported-traffic-types:
-
-Step 5 - supported traffic types
-================================
-
-Currently VSPERF supports three different types of tests for traffic generators,
-these are identified in vsperf through the traffic type, which include:
-
- * RFC2544 throughput - Send fixed size packets at different rates, using
- traffic configuration, until minimum rate at which no packet loss is
- detected is found. Methods with its implementation have suffix
- **_rfc2544_throughput**.
-
- * RFC2544 back2back - Send fixed size packets at a fixed rate, using traffic
- configuration, for specified time interval. Methods with its
- implementation have suffix **_rfc2544_back2back**.
-
- * continuous flow - Send fixed size packets at given framerate, using traffic
- configuration, for specified time interval. Methods with its
- implementation have suffix **_cont_traffic**.
-
-In general, both synchronous and asynchronous interfaces must be implemented
-for each traffic type. Synchronous functions start with prefix **send_**.
-Asynchronous with prefixes **start_** and **wait_** in case of throughput
-and back2back and **start_** and **stop_** in case of continuous traffic type.
-
-Example of synchronous interfaces:
-
-.. code-block:: python
-
- def send_rfc2544_throughput(self, traffic=None, tests=1, duration=20,
- lossrate=0.0):
- def send_rfc2544_back2back(self, traffic=None, tests=1, duration=20,
- lossrate=0.0):
- def send_cont_traffic(self, traffic=None, duration=20):
-
-Example of asynchronous interfaces:
-
-.. code-block:: python
-
- def start_rfc2544_throughput(self, traffic=None, tests=1, duration=20,
- lossrate=0.0):
- def wait_rfc2544_throughput(self):
-
- def start_rfc2544_back2back(self, traffic=None, tests=1, duration=20,
- lossrate=0.0):
- def wait_rfc2544_back2back(self):
-
- def start_cont_traffic(self, traffic=None, duration=20):
- def stop_cont_traffic(self):
-
-Description of parameters used by **send**, **start**, **wait** and **stop**
-functions:
-
- * param **traffic**: A dictionary with detailed definition of traffic
- pattern. It contains following parameters to be implemented by
- traffic generator.
-
- Note: Traffic dictionary has also virtual switch related parameters,
- which are not listed below.
-
- Note: There are parameters specific to testing of tunnelling protocols,
- which are discussed in detail at :ref:`integration-tests` userguide.
-
- * param **traffic_type**: One of the supported traffic types,
- e.g. **rfc2544_throughput**, **rfc2544_continuous**
- or **rfc2544_back2back**.
- * param **frame_rate**: Defines desired percentage of frame
- rate used during continuous stream tests.
- * param **bidir**: Specifies if generated traffic will be full-duplex
- (true) or half-duplex (false).
- * param **multistream**: Defines number of flows simulated by traffic
- generator. Value 0 disables MultiStream feature.
- * param **stream_type**: Stream Type defines ISO OSI network layer
- used for simulation of multiple streams.
- Supported values:
-
- * **L2** - iteration of destination MAC address
- * **L3** - iteration of destination IP address
- * **L4** - iteration of destination port of selected transport protocol
-
- * param **l2**: A dictionary with data link layer details, e.g. **srcmac**,
- **dstmac** and **framesize**.
- * param **l3**: A dictionary with network layer details, e.g. **srcip**,
- **dstip** and **proto**.
- * param **l3**: A dictionary with transport layer details, e.g. **srcport**,
- **dstport**.
- * param **vlan**: A dictionary with vlan specific parameters,
- e.g. **priority**, **cfi**, **id** and vlan on/off switch **enabled**.
-
- * param **tests**: Number of times the test is executed.
- * param **duration**: Duration of continuous test or per iteration duration
- in case of RFC2544 throughput or back2back traffic types.
- * param **lossrate**: Acceptable lossrate percentage.
-
-Step 6 - passing back results
-=============================
-
-It is expected that methods **send**, **wait** and **stop** will return
-values measured by traffic generator within a dictionary. Dictionary keys
-are defined in **ResultsConstants** implemented in
-**core/results/results_constants.py**. Please check sections for RFC2544
-Throughput & Continuous and for Back2Back. The same key names should
-be used by all traffic generator implementations.
-
diff --git a/docs/testing/developer/design/vsperf.png b/docs/testing/developer/design/vsperf.png
deleted file mode 100644
index 4af2ac62..00000000
--- a/docs/testing/developer/design/vsperf.png
+++ /dev/null
Binary files differ
diff --git a/docs/testing/developer/design/vswitchperf_design.rst b/docs/testing/developer/design/vswitchperf_design.rst
deleted file mode 100644
index da7ec6fd..00000000
--- a/docs/testing/developer/design/vswitchperf_design.rst
+++ /dev/null
@@ -1,870 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-.. _vsperf-design:
-
-======================
-VSPERF Design Document
-======================
-
-Intended Audience
-=================
-
-This document is intended to aid those who want to modify the vsperf code. Or
-to extend it - for example to add support for new traffic generators,
-deployment scenarios and so on.
-
-Usage
-=====
-
-Example Connectivity to DUT
----------------------------
-
-Establish connectivity to the VSPERF DUT Linux host, such as the DUT in Pod 3,
-by following the steps in `Testbed POD3
-<https://wiki.opnfv.org/get_started/pod_3_-_characterize_vswitch_performance>`__
-
-The steps cover booking the DUT and establishing the VSPERF environment.
-
-Example Command Lines
----------------------
-
-List all the cli options:
-
-.. code-block:: console
-
- $ ./vsperf -h
-
-Run all tests that have ``tput`` in their name - ``phy2phy_tput``, ``pvp_tput`` etc.:
-
-.. code-block:: console
-
- $ ./vsperf --tests 'tput'
-
-As above but override default configuration with settings in '10_custom.conf'.
-This is useful as modifying configuration directly in the configuration files
-in ``conf/NN_*.py`` shows up as changes under git source control:
-
-.. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf --tests 'tput'
-
-Override specific test parameters. Useful for shortening the duration of tests
-for development purposes:
-
-.. code-block:: console
-
- $ ./vsperf --test-params 'TRAFFICGEN_DURATION=10;TRAFFICGEN_RFC2544_TESTS=1;' \
- 'TRAFFICGEN_PKT_SIZES=(64,)' pvp_tput
-
-Typical Test Sequence
-=====================
-
-This is a typical flow of control for a test.
-
-.. image:: vsperf.png
-
-.. _design-configuration:
-
-Configuration
-=============
-
-The conf package contains the configuration files (``*.conf``) for all system
-components, it also provides a ``settings`` object that exposes all of these
-settings.
-
-Settings are not passed from component to component. Rather they are available
-globally to all components once they import the conf package.
-
-.. code-block:: python
-
- from conf import settings
- ...
- log_file = settings.getValue('LOG_FILE_DEFAULT')
-
-Settings files (``*.conf``) are valid python code so can be set to complex
-types such as lists and dictionaries as well as scalar types:
-
-.. code-block:: python
-
- first_packet_size = settings.getValue('PACKET_SIZE_LIST')[0]
-
-Configuration Procedure and Precedence
---------------------------------------
-
-Configuration files follow a strict naming convention that allows them to be
-processed in a specific order. All the .conf files are named ``NN_name.conf``,
-where NN is a decimal number. The files are processed in order from 00_name.conf
-to 99_name.conf so that if the name setting is given in both a lower and higher
-numbered conf file then the higher numbered file is the effective setting as it
-is processed after the setting in the lower numbered file.
-
-The values in the file specified by ``--conf-file`` takes precedence over all
-the other configuration files and does not have to follow the naming
-convention.
-
-.. _paths-documentation:
-
-Configuration of PATHS dictionary
----------------------------------
-
-VSPERF uses external tools like Open vSwitch and Qemu for execution of testcases. These
-tools may be downloaded and built automatically (see :ref:`vsperf-installation-script`)
-or installed manually by user from binary packages. It is also possible to use a combination
-of both approaches, but it is essential to correctly set paths to all required tools.
-These paths are stored within a PATHS dictionary, which is evaluated before execution
-of each testcase, in order to setup testcase specific environment. Values selected for testcase
-execution are internally stored inside TOOLS dictionary, which is used by VSPERF to execute
-external tools, load kernel modules, etc.
-
-The default configuration of PATHS dictionary is spread among three different configuration files
-to follow logical grouping of configuration options. Basic description of PATHS dictionary
-is placed inside ``conf/00_common.conf``. The configuration specific to DPDK and vswitches
-is located at ``conf/02_vswitch.conf``. The last part related to the Qemu is defined inside
-``conf/04_vnf.conf``. Default configuration values can be used in case, that all required
-tools were downloaded and built automatically by vsperf itself. In case, that some of
-tools were installed manually from binary packages, then it will be necessary to modify
-the content of PATHS dictionary accordingly.
-
-Dictionary has a specific section of configuration options for every tool type, it means:
-
- * ``PATHS['vswitch']`` - contains a separete dictionary for each of vswitches supported by VSPEF
-
- Example:
-
- .. code-block:: python
-
- PATHS['vswitch'] = {
- 'OvsDpdkVhost': { ... },
- 'OvsVanilla' : { ... },
- ...
- }
-
- * ``PATHS['dpdk']`` - contains paths to the dpdk sources, kernel modules and tools (e.g. testpmd)
-
- Example:
-
- .. code-block:: python
-
- PATHS['dpdk'] = {
- 'type' : 'src',
- 'src': {
- 'path': os.path.join(ROOT_DIR, 'src/dpdk/dpdk/'),
- 'modules' : ['uio', os.path.join(RTE_TARGET, 'kmod/igb_uio.ko')],
- 'bind-tool': 'tools/dpdk*bind.py',
- 'testpmd': os.path.join(RTE_TARGET, 'app', 'testpmd'),
- },
- ...
- }
-
- * ``PATHS['qemu']`` - contains paths to the qemu sources and executable file
-
- Example:
-
- .. code-block:: python
-
- PATHS['qemu'] = {
- 'type' : 'bin',
- 'bin': {
- 'qemu-system': 'qemu-system-x86_64'
- },
- ...
- }
-
-Every section specific to the particular vswitch, dpdk or qemu may contain following types
-of configuration options:
-
- * option ``type`` - is a string, which defines the type of configured paths ('src' or 'bin')
- to be selected for a given section:
-
- * value ``src`` means, that VSPERF will use vswitch, DPDK or QEMU built from sources
- e.g. by execution of ``systems/build_base_machine.sh`` script during VSPERF
- installation
-
- * value ``bin`` means, that VSPERF will use vswitch, DPDK or QEMU binaries installed
- directly in the operating system, e.g. via OS specific packaging system
-
- * option ``path`` - is a string with a valid system path; Its content is checked for
- existence, prefixed with section name and stored into TOOLS for later use
- e.g. ``TOOLS['dpdk_src']`` or ``TOOLS['vswitch_src']``
-
- * option ``modules`` - is list of strings with names of kernel modules; Every module name
- from given list is checked for a '.ko' suffix. In case that it matches and if it is not
- an absolute path to the module, then module name is prefixed with value of ``path``
- option defined for the same section
-
- Example:
-
- .. code-block:: python
-
- """
- snippet of PATHS definition from the configuration file:
- """
- PATHS['vswitch'] = {
- 'OvsVanilla' = {
- 'type' : 'src',
- 'src': {
- 'path': '/tmp/vsperf/src_vanilla/ovs/ovs/',
- 'modules' : ['datapath/linux/openvswitch.ko'],
- ...
- },
- ...
- }
- ...
- }
-
- """
- Final content of TOOLS dictionary used during runtime:
- """
- TOOLS['vswitch_modules'] = ['/tmp/vsperf/src_vanilla/ovs/ovs/datapath/linux/openvswitch.ko']
-
- * all other options are strings with names and paths to specific tools; If a given string
- contains a relative path and option ``path`` is defined for a given section, then string
- content will be prefixed with content of the ``path``. Otherwise the name of the tool will be
- searched within standard system directories. In case that filename contains OS specific
- wildcards, then they will be expanded to the real path. At the end of the processing, every
- absolute path will be checked for its existence. In case that temporary path (i.e. path with
- a ``_tmp`` suffix) does not exist, then log will be written and vsperf will continue. If any
- other path will not exist, then vsperf execution will be terminated with a runtime error.
-
- Example:
-
- .. code-block:: python
-
- """
- snippet of PATHS definition from the configuration file:
- """
- PATHS['vswitch'] = {
- 'OvsDpdkVhost': {
- 'type' : 'src',
- 'src': {
- 'path': '/tmp/vsperf/src_vanilla/ovs/ovs/',
- 'ovs-vswitchd': 'vswitchd/ovs-vswitchd',
- 'ovsdb-server': 'ovsdb/ovsdb-server',
- ...
- }
- ...
- }
- ...
- }
-
- """
- Final content of TOOLS dictionary used during runtime:
- """
- TOOLS['ovs-vswitchd'] = '/tmp/vsperf/src_vanilla/ovs/ovs/vswitchd/ovs-vswitchd'
- TOOLS['ovsdb-server'] = '/tmp/vsperf/src_vanilla/ovs/ovs/ovsdb/ovsdb-server'
-
-Note: In case that ``bin`` type is set for DPDK, then ``TOOLS['dpdk_src']`` will be set to
-the value of ``PATHS['dpdk']['src']['path']``. The reason is, that VSPERF uses downloaded
-DPDK sources to copy DPDK and testpmd into the GUEST, where testpmd is built. In case,
-that DPDK sources are not available, then vsperf will continue with test execution,
-but testpmd can't be used as a guest loopback. This is useful in case, that other guest
-loopback applications (e.g. buildin or l2fwd) are used.
-
-Note: In case of RHEL 7.3 OS usage, binary package configuration is required
-for Vanilla OVS tests. With the installation of a supported rpm for OVS there is
-a section in the ``conf\10_custom.conf`` file that can be used.
-
-.. _configuration-of-traffic-dictionary:
-
-Configuration of TRAFFIC dictionary
------------------------------------
-
-TRAFFIC dictionary is used for configuration of traffic generator. Default values
-can be found in configuration file ``conf/03_traffic.conf``. These default values
-can be modified by (first option has the highest priorty):
-
- 1. ``Parameters`` section of testcase defintion
- 2. command line options specified by ``--test-params`` argument
- 3. custom configuration file
-
-It is to note, that in case of option 1 and 2, it is possible to specify only
-values, which should be changed. In case of custom configuration file, it is
-required to specify whole ``TRAFFIC`` dictionary with its all values or explicitly
-call and update() method of ``TRAFFIC`` dictionary.
-
-Detailed description of ``TRAFFIC`` dictionary items follows:
-
-.. code-block:: console
-
- 'traffic_type' - One of the supported traffic types.
- E.g. rfc2544_throughput, rfc2544_back2back
- or rfc2544_continuous
- Data type: str
- Default value: "rfc2544_throughput".
- 'bidir' - Specifies if generated traffic will be full-duplex (True)
- or half-duplex (False)
- Data type: str
- Supported values: "True", "False"
- Default value: "False".
- 'frame_rate' - Defines desired percentage of frame rate used during
- continuous stream tests.
- Data type: int
- Default value: 100.
- 'multistream' - Defines number of flows simulated by traffic generator.
- Value 0 disables multistream feature
- Data type: int
- Supported values: 0-65535
- Default value: 0.
- 'stream_type' - Stream type is an extension of the "multistream" feature.
- If multistream is disabled, then stream type will be
- ignored. Stream type defines ISO OSI network layer used
- for simulation of multiple streams.
- Data type: str
- Supported values:
- "L2" - iteration of destination MAC address
- "L3" - iteration of destination IP address
- "L4" - iteration of destination port
- of selected transport protocol
- Default value: "L4".
- 'pre_installed_flows'
- - Pre-installed flows is an extension of the "multistream"
- feature. If enabled, it will implicitly insert a flow
- for each stream. If multistream is disabled, then
- pre-installed flows will be ignored.
- Note: It is supported only for p2p deployment scenario.
- Data type: str
- Supported values:
- "Yes" - flows will be inserted into OVS
- "No" - flows won't be inserted into OVS
- Default value: "No".
- 'flow_type' - Defines flows complexity.
- Data type: str
- Supported values:
- "port" - flow is defined by ingress ports
- "IP" - flow is defined by ingress ports
- and src and dst IP addresses
- Default value: "port"
- 'l2' - A dictionary with l2 network layer details. Supported
- values are:
- 'srcmac' - Specifies source MAC address filled by traffic generator.
- NOTE: It can be modified by vsperf in some scenarios.
- Data type: str
- Default value: "00:00:00:00:00:00".
- 'dstmac' - Specifies destination MAC address filled by traffic generator.
- NOTE: It can be modified by vsperf in some scenarios.
- Data type: str
- Default value: "00:00:00:00:00:00".
- 'framesize' - Specifies default frame size. This value should not be
- changed directly. It will be overridden during testcase
- execution by values specified by list TRAFFICGEN_PKT_SIZES.
- Data type: int
- Default value: 64
- 'l3' - A dictionary with l3 network layer details. Supported
- values are:
- 'srcip' - Specifies source MAC address filled by traffic generator.
- NOTE: It can be modified by vsperf in some scenarios.
- Data type: str
- Default value: "1.1.1.1".
- 'dstip' - Specifies destination MAC address filled by traffic generator.
- NOTE: It can be modified by vsperf in some scenarios.
- Data type: str
- Default value: "90.90.90.90".
- 'proto' - Specifies deflaut protocol type.
- Please check particular traffic generator implementation
- for supported protocol types.
- Data type: str
- Default value: "udp".
- 'l4' - A dictionary with l4 network layer details. Supported
- values are:
- 'srcport' - Specifies source port of selected transport protocol.
- NOTE: It can be modified by vsperf in some scenarios.
- Data type: int
- Default value: 3000
- 'dstport' - Specifies destination port of selected transport protocol.
- NOTE: It can be modified by vsperf in some scenarios.
- Data type: int
- Default value: 3001
- 'vlan' - A dictionary with vlan encapsulation details. Supported
- values are:
- 'enabled' - Specifies if vlan encapsulation should be enabled or
- disabled.
- Data type: bool
- Default value: False
- 'id' - Specifies vlan id.
- Data type: int (NOTE: must fit to 12 bits)
- Default value: 0
- 'priority' - Specifies a vlan priority (PCP header field).
- Data type: int (NOTE: must fit to 3 bits)
- Default value: 0
- 'cfi' - Specifies if frames can or cannot be dropped during
- congestion (DEI header field).
- Data type: int (NOTE: must fit to 1 bit)
- Default value: 0
-
-.. _configuration-of-guest-options:
-
-Configuration of GUEST options
-------------------------------
-
-VSPERF is able to setup scenarios involving a number of VMs in series or in parallel.
-All configuration options related to a particular VM instance are defined as
-lists and prefixed with ``GUEST_`` label. It is essential, that there is enough
-items in all ``GUEST_`` options to cover all VM instances involved in the test.
-In case there is not enough items, then VSPERF will use the first item of
-particular ``GUEST_`` option to expand the list to required length.
-
-Example of option expansion for 4 VMs:
-
- .. code-block:: python
-
- """
- Original values:
- """
- GUEST_SMP = ['2']
- GUEST_MEMORY = ['2048', '4096']
-
- """
- Values after automatic expansion:
- """
- GUEST_SMP = ['2', '2', '2', '2']
- GUEST_MEMORY = ['2048', '4096', '2048', '2048']
-
-
-First option can contain macros starting with ``#`` to generate VM specific values.
-These macros can be used only for options of ``list`` or ``str`` types with ``GUEST_``
-prefix.
-
-Example of macros and their expnasion for 2 VMs:
-
- .. code-block:: python
-
- """
- Original values:
- """
- GUEST_SHARE_DIR = ['/tmp/qemu#VMINDEX_share']
- GUEST_BRIDGE_IP = ['#IP(1.1.1.5)/16']
-
- """
- Values after automatic expansion:
- """
- GUEST_SHARE_DIR = ['/tmp/qemu0_share', '/tmp/qemu1_share']
- GUEST_BRIDGE_IP = ['1.1.1.5/16', '1.1.1.6/16']
-
-Additional examples are available at ``04_vnf.conf``.
-
-Note: In case, that macro is detected in the first item of the list, then
-all other items are ignored and list content is created automatically.
-
-Multiple macros can be used inside one configuration option definition, but macros
-cannot be used inside other macros. The only exception is macro ``#VMINDEX``, which
-is expanded first and thus it can be used inside other macros.
-
-Following macros are supported:
-
- * ``#VMINDEX`` - it is replaced by index of VM being executed; This macro
- is expanded first, so it can be used inside other macros.
-
- Example:
-
- .. code-block:: python
-
- GUEST_SHARE_DIR = ['/tmp/qemu#VMINDEX_share']
-
- * ``#MAC(mac_address[, step])`` - it will iterate given ``mac_address``
- with optional ``step``. In case that step is not defined, then it is set to 1.
- It means, that first VM will use the value of ``mac_address``, second VM
- value of ``mac_address`` increased by ``step``, etc.
-
- Example:
-
- .. code-block:: python
-
- GUEST_NICS = [[{'mac' : '#MAC(00:00:00:00:00:01,2)'}]]
-
- * ``#IP(ip_address[, step])`` - it will iterate given ``ip_address``
- with optional ``step``. In case that step is not defined, then it is set to 1.
- It means, that first VM will use the value of ``ip_address``, second VM
- value of ``ip_address`` increased by ``step``, etc.
-
- Example:
-
- .. code-block:: python
-
- GUEST_BRIDGE_IP = ['#IP(1.1.1.5)/16']
-
- * ``#EVAL(expression)`` - it will evaluate given ``expression`` as python code;
- Only simple expressions should be used. Call of the functions is not supported.
-
- Example:
-
- .. code-block:: python
-
- GUEST_CORE_BINDING = [('#EVAL(6+2*#VMINDEX)', '#EVAL(7+2*#VMINDEX)')]
-
-Other Configuration
--------------------
-
-``conf.settings`` also loads configuration from the command line and from the environment.
-
-.. _pxp-deployment:
-
-PXP Deployment
-==============
-
-Every testcase uses one of the supported deployment scenarios to setup test environment.
-The controller responsible for a given scenario configures flows in the vswitch to route
-traffic among physical interfaces connected to the traffic generator and virtual
-machines. VSPERF supports several deployments including PXP deployment, which can
-setup various scenarios with multiple VMs.
-
-These scenarios are realized by VswitchControllerPXP class, which can configure and
-execute given number of VMs in serial or parallel configurations. Every VM can be
-configured with just one or an even number of interfaces. In case that VM has more than
-2 interfaces, then traffic is properly routed among pairs of interfaces.
-
-Example of traffic routing for VM with 4 NICs in serial configuration:
-
-.. code-block:: console
-
- +------------------------------------------+
- | VM with 4 NICs |
- | +---------------+ +---------------+ |
- | | Application | | Application | |
- | +---------------+ +---------------+ |
- | ^ | ^ | |
- | | v | v |
- | +---------------+ +---------------+ |
- | | logical ports | | logical ports | |
- | | 0 1 | | 2 3 | |
- +--+---------------+----+---------------+--+
- ^ : ^ :
- | | | |
- : v : v
- +-----------+---------------+----+---------------+----------+
- | vSwitch | 0 1 | | 2 3 | |
- | | logical ports | | logical ports | |
- | previous +---------------+ +---------------+ next |
- | VM or PHY ^ | ^ | VM or PHY|
- | port -----+ +------------+ +---> port |
- +-----------------------------------------------------------+
-
-It is also possible to define different number of interfaces for each VM to better
-simulate real scenarios.
-
-Example of traffic routing for 2 VMs in serial configuration, where 1st VM has
-4 NICs and 2nd VM 2 NICs:
-
-.. code-block:: console
-
- +------------------------------------------+ +---------------------+
- | 1st VM with 4 NICs | | 2nd VM with 2 NICs |
- | +---------------+ +---------------+ | | +---------------+ |
- | | Application | | Application | | | | Application | |
- | +---------------+ +---------------+ | | +---------------+ |
- | ^ | ^ | | | ^ | |
- | | v | v | | | v |
- | +---------------+ +---------------+ | | +---------------+ |
- | | logical ports | | logical ports | | | | logical ports | |
- | | 0 1 | | 2 3 | | | | 0 1 | |
- +--+---------------+----+---------------+--+ +--+---------------+--+
- ^ : ^ : ^ :
- | | | | | |
- : v : v : v
- +-----------+---------------+----+---------------+-------+---------------+----------+
- | vSwitch | 0 1 | | 2 3 | | 4 5 | |
- | | logical ports | | logical ports | | logical ports | |
- | previous +---------------+ +---------------+ +---------------+ next |
- | VM or PHY ^ | ^ | ^ | VM or PHY|
- | port -----+ +------------+ +---------------+ +----> port |
- +-----------------------------------------------------------------------------------+
-
-The number of VMs involved in the test and the type of their connection is defined
-by deployment name as follows:
-
- * ``pvvp[number]`` - configures scenario with VMs connected in series with
- optional ``number`` of VMs. In case that ``number`` is not specified, then
- 2 VMs will be used.
-
- Example of 2 VMs in a serial configuration:
-
- .. code-block:: console
-
- +----------------------+ +----------------------+
- | 1st VM | | 2nd VM |
- | +---------------+ | | +---------------+ |
- | | Application | | | | Application | |
- | +---------------+ | | +---------------+ |
- | ^ | | | ^ | |
- | | v | | | v |
- | +---------------+ | | +---------------+ |
- | | logical ports | | | | logical ports | |
- | | 0 1 | | | | 0 1 | |
- +---+---------------+--+ +---+---------------+--+
- ^ : ^ :
- | | | |
- : v : v
- +---+---------------+---------+---------------+--+
- | | 0 1 | | 3 4 | |
- | | logical ports | vSwitch | logical ports | |
- | +---------------+ +---------------+ |
- | ^ | ^ | |
- | | +-----------------+ v |
- | +----------------------------------------+ |
- | | physical ports | |
- | | 0 1 | |
- +---+----------------------------------------+---+
- ^ :
- | |
- : v
- +------------------------------------------------+
- | |
- | traffic generator |
- | |
- +------------------------------------------------+
-
- * ``pvpv[number]`` - configures scenario with VMs connected in parallel with
- optional ``number`` of VMs. In case that ``number`` is not specified, then
- 2 VMs will be used. Multistream feature is used to route traffic to particular
- VMs (or NIC pairs of every VM). It means, that VSPERF will enable multistream
- feaure and sets the number of streams to the number of VMs and their NIC
- pairs. Traffic will be dispatched based on Stream Type, i.e. by UDP port,
- IP address or MAC address.
-
- Example of 2 VMs in a parallel configuration, where traffic is dispatched
- based on the UDP port.
-
- .. code-block:: console
-
- +----------------------+ +----------------------+
- | 1st VM | | 2nd VM |
- | +---------------+ | | +---------------+ |
- | | Application | | | | Application | |
- | +---------------+ | | +---------------+ |
- | ^ | | | ^ | |
- | | v | | | v |
- | +---------------+ | | +---------------+ |
- | | logical ports | | | | logical ports | |
- | | 0 1 | | | | 0 1 | |
- +---+---------------+--+ +---+---------------+--+
- ^ : ^ :
- | | | |
- : v : v
- +---+---------------+---------+---------------+--+
- | | 0 1 | | 3 4 | |
- | | logical ports | vSwitch | logical ports | |
- | +---------------+ +---------------+ |
- | ^ | ^ : |
- | | ......................: : |
- | UDP | UDP : | : |
- | port| port: +--------------------+ : |
- | 0 | 1 : | : |
- | | : v v |
- | +----------------------------------------+ |
- | | physical ports | |
- | | 0 1 | |
- +---+----------------------------------------+---+
- ^ :
- | |
- : v
- +------------------------------------------------+
- | |
- | traffic generator |
- | |
- +------------------------------------------------+
-
-
-PXP deployment is backward compatible with PVP deployment, where ``pvp`` is
-an alias for ``pvvp1`` and it executes just one VM.
-
-The number of interfaces used by VMs is defined by configuration option
-``GUEST_NICS_NR``. In case that more than one pair of interfaces is defined
-for VM, then:
-
- * for ``pvvp`` (serial) scenario every NIC pair is connected in serial
- before connection to next VM is created
- * for ``pvpv`` (parallel) scenario every NIC pair is directly connected
- to the physical ports and unique traffic stream is assigned to it
-
-Examples:
-
- * Deployment ``pvvp10`` will start 10 VMs and connects them in series
- * Deployment ``pvpv4`` will start 4 VMs and connects them in parallel
- * Deployment ``pvpv1`` and GUEST_NICS_NR = [4] will start 1 VM with
- 4 interfaces and every NIC pair is directly connected to the
- physical ports
- * Deployment ``pvvp`` and GUEST_NICS_NR = [2, 4] will start 2 VMs;
- 1st VM will have 2 interfaces and 2nd VM 4 interfaces. These interfaces
- will be connected in serial, i.e. traffic will flow as follows:
- PHY1 -> VM1_1 -> VM1_2 -> VM2_1 -> VM2_2 -> VM2_3 -> VM2_4 -> PHY2
-
-Note: In case that only 1 or more than 2 NICs are configured for VM,
-then ``testpmd`` should be used as forwarding application inside the VM.
-As it is able to forward traffic between multiple VM NIC pairs.
-
-Note: In case of ``linux_bridge``, all NICs are connected to the same
-bridge inside the VM.
-
-VM, vSwitch, Traffic Generator Independence
-===========================================
-
-VSPERF supports different vSwithes, Traffic Generators, VNFs
-and Forwarding Applications by using standard object-oriented polymorphism:
-
- * Support for vSwitches is implemented by a class inheriting from IVSwitch.
- * Support for Traffic Generators is implemented by a class inheriting from
- ITrafficGenerator.
- * Support for VNF is implemented by a class inheriting from IVNF.
- * Support for Forwarding Applications is implemented by a class inheriting
- from IPktFwd.
-
-By dealing only with the abstract interfaces the core framework can support
-many implementations of different vSwitches, Traffic Generators, VNFs
-and Forwarding Applications.
-
-IVSwitch
---------
-
-.. code-block:: python
-
- class IVSwitch:
- start(self)
- stop(self)
- add_switch(switch_name)
- del_switch(switch_name)
- add_phy_port(switch_name)
- add_vport(switch_name)
- get_ports(switch_name)
- del_port(switch_name, port_name)
- add_flow(switch_name, flow)
- del_flow(switch_name, flow=None)
-
-ITrafficGenerator
------------------
-
-.. code-block:: python
-
- class ITrafficGenerator:
- connect()
- disconnect()
-
- send_burst_traffic(traffic, numpkts, time, framerate)
-
- send_cont_traffic(traffic, time, framerate)
- start_cont_traffic(traffic, time, framerate)
- stop_cont_traffic(self):
-
- send_rfc2544_throughput(traffic, tests, duration, lossrate)
- start_rfc2544_throughput(traffic, tests, duration, lossrate)
- wait_rfc2544_throughput(self)
-
- send_rfc2544_back2back(traffic, tests, duration, lossrate)
- start_rfc2544_back2back(traffic, , tests, duration, lossrate)
- wait_rfc2544_back2back()
-
-Note ``send_xxx()`` blocks whereas ``start_xxx()`` does not and must be followed by a subsequent call to ``wait_xxx()``.
-
-IVnf
-----
-
-.. code-block:: python
-
- class IVnf:
- start(memory, cpus,
- monitor_path, shared_path_host,
- shared_path_guest, guest_prompt)
- stop()
- execute(command)
- wait(guest_prompt)
- execute_and_wait (command)
-
-IPktFwd
---------
-
- .. code-block:: python
-
- class IPktFwd:
- start()
- stop()
-
-
-Controllers
------------
-
-Controllers are used in conjunction with abstract interfaces as way
-of decoupling the control of vSwtiches, VNFs, TrafficGenerators
-and Forwarding Applications from other components.
-
-The controlled classes provide basic primitive operations. The Controllers
-sequence and co-ordinate these primitive operation in to useful actions. For
-instance the vswitch_controller_p2p can be used to bring any vSwitch (that
-implements the primitives defined in IVSwitch) into the configuration required
-by the Phy-to-Phy Deployment Scenario.
-
-In order to support a new vSwitch only a new implementation of IVSwitch needs
-be created for the new vSwitch to be capable of fulfilling all the Deployment
-Scenarios provided for by existing or future vSwitch Controllers.
-
-Similarly if a new Deployment Scenario is required it only needs to be written
-once as a new vSwitch Controller and it will immediately be capable of
-controlling all existing and future vSwitches in to that Deployment Scenario.
-
-Similarly the Traffic Controllers can be used to co-ordinate basic operations
-provided by implementers of ITrafficGenerator to provide useful tests. Though
-traffic generators generally already implement full test cases i.e. they both
-generate suitable traffic and analyse returned traffic in order to implement a
-test which has typically been predefined in an RFC document. However the
-Traffic Controller class allows for the possibility of further enhancement -
-such as iterating over tests for various packet sizes or creating new tests.
-
-Traffic Controller's Role
--------------------------
-
-.. image:: traffic_controller.png
-
-
-Loader & Component Factory
---------------------------
-
-The working of the Loader package (which is responsible for *finding* arbitrary
-classes based on configuration data) and the Component Factory which is
-responsible for *choosing* the correct class for a particular situation - e.g.
-Deployment Scenario can be seen in this diagram.
-
-.. image:: factory_and_loader.png
-
-Routing Tables
-==============
-
-Vsperf uses a standard set of routing tables in order to allow tests to easily
-mix and match Deployment Scenarios (PVP, P2P topology), Tuple Matching and
-Frame Modification requirements.
-
-.. code-block:: console
-
- +--------------+
- | |
- | Table 0 | table#0 - Match table. Flows designed to force 5 & 10
- | | tuple matches go here.
- | |
- +--------------+
- |
- |
- v
- +--------------+ table#1 - Routing table. Flow entries to forward
- | | packets between ports goes here.
- | Table 1 | The chosen port is communicated to subsequent tables by
- | | setting the metadata value to the egress port number.
- | | Generally this table is set-up by by the
- +--------------+ vSwitchController.
- |
- |
- v
- +--------------+ table#2 - Frame modification table. Frame modification
- | | flow rules are isolated in this table so that they can
- | Table 2 | be turned on or off without affecting the routing or
- | | tuple-matching flow rules. This allows the frame
- | | modification and tuple matching required by the tests
- | | in the VSWITCH PERFORMANCE FOR TELCO NFV test
- +--------------+ specification to be independent of the Deployment
- | Scenario set up by the vSwitchController.
- |
- v
- +--------------+
- | |
- | Table 3 | table#3 - Egress table. Egress packets on the ports
- | | setup in Table 1.
- +--------------+
-
-
diff --git a/docs/testing/developer/requirements/LICENSE b/docs/testing/developer/requirements/LICENSE
deleted file mode 100644
index 7bc572ce..00000000
--- a/docs/testing/developer/requirements/LICENSE
+++ /dev/null
@@ -1,2 +0,0 @@
-This work is licensed under a Creative Commons Attribution 4.0 International License.
-http://creativecommons.org/licenses/by/4.0
diff --git a/docs/testing/developer/requirements/ietf_draft/LICENSE b/docs/testing/developer/requirements/ietf_draft/LICENSE
deleted file mode 100644
index 7fc9ae14..00000000
--- a/docs/testing/developer/requirements/ietf_draft/LICENSE
+++ /dev/null
@@ -1,12 +0,0 @@
-Copyright (c) 2016 IETF Trust and the persons identified as the
-document authors. All rights reserved.
-
-This document is subject to BCP 78 and the IETF Trust's Legal
-Provisions Relating to IETF Documents
-(http://trustee.ietf.org/license-info) in effect on the date of
-publication of this document. Please review these documents
-carefully, as they describe your rights and restrictions with respect
-to this document. Code Components extracted from this document must
-include Simplified BSD License text as described in Section 4.e of
-the Trust Legal Provisions and are provided without warranty as
-described in the Simplified BSD License.
diff --git a/docs/testing/developer/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-00.xml b/docs/testing/developer/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-00.xml
deleted file mode 100644
index 2259b23c..00000000
--- a/docs/testing/developer/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-00.xml
+++ /dev/null
@@ -1,1016 +0,0 @@
-<?xml version="1.0" encoding="US-ASCII"?>
-<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
-<?rfc toc="yes"?>
-<?rfc tocompact="yes"?>
-<?rfc tocdepth="3"?>
-<?rfc tocindent="yes"?>
-<?rfc symrefs="yes"?>
-<?rfc sortrefs="yes"?>
-<?rfc comments="yes"?>
-<?rfc inline="yes"?>
-<?rfc compact="yes"?>
-<?rfc subcompact="no"?>
-<rfc category="info" docName="draft-ietf-bmwg-vswitch-opnfv-00"
- ipr="trust200902">
- <front>
- <title abbrev="Benchmarking vSwitches">Benchmarking Virtual Switches in
- OPNFV</title>
-
- <author fullname="Maryam Tahhan" initials="M." surname="Tahhan">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>maryam.tahhan@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Billy O'Mahony" initials="B." surname="O'Mahony">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>billy.o.mahony@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Al Morton" initials="A." surname="Morton">
- <organization>AT&amp;T Labs</organization>
-
- <address>
- <postal>
- <street>200 Laurel Avenue South</street>
-
- <city>Middletown,</city>
-
- <region>NJ</region>
-
- <code>07748</code>
-
- <country>USA</country>
- </postal>
-
- <phone>+1 732 420 1571</phone>
-
- <facsimile>+1 732 368 1192</facsimile>
-
- <email>acmorton@att.com</email>
-
- <uri>http://home.comcast.net/~acmacm/</uri>
- </address>
- </author>
-
- <date day="8" month="July" year="2016"/>
-
- <abstract>
- <t>This memo describes the progress of the Open Platform for NFV (OPNFV)
- project on virtual switch performance "VSWITCHPERF". This project
- intends to build on the current and completed work of the Benchmarking
- Methodology Working Group in IETF, by referencing existing literature.
- The Benchmarking Methodology Working Group has traditionally conducted
- laboratory characterization of dedicated physical implementations of
- internetworking functions. Therefore, this memo begins to describe the
- additional considerations when virtual switches are implemented in
- general-purpose hardware. The expanded tests and benchmarks are also
- influenced by the OPNFV mission to support virtualization of the "telco"
- infrastructure.</t>
- </abstract>
-
- <note title="Requirements Language">
- <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
- "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
- document are to be interpreted as described in <xref
- target="RFC2119">RFC 2119</xref>.</t>
-
- <t/>
- </note>
- </front>
-
- <middle>
- <section title="Introduction">
- <t>Benchmarking Methodology Working Group (BMWG) has traditionally
- conducted laboratory characterization of dedicated physical
- implementations of internetworking functions. The Black-box Benchmarks
- of Throughput, Latency, Forwarding Rates and others have served our
- industry for many years. Now, Network Function Virtualization (NFV) has
- the goal to transform how internetwork functions are implemented, and
- therefore has garnered much attention.</t>
-
- <t>This memo summarizes the progress of the Open Platform for NFV
- (OPNFV) project on virtual switch performance characterization,
- "VSWITCHPERF", through the Brahmaputra (second) release <xref
- target="BrahRel"/>. This project intends to build on the current and
- completed work of the Benchmarking Methodology Working Group in IETF, by
- referencing existing literature. For example, currently the most often
- referenced RFC is <xref target="RFC2544"/> (which depends on <xref
- target="RFC1242"/>) and foundation of the benchmarking work in OPNFV is
- common and strong.</t>
-
- <t>See
- https://wiki.opnfv.org/characterize_vswitch_performance_for_telco_nfv_use_cases
- for more background, and the OPNFV website for general information:
- https://www.opnfv.org/</t>
-
- <t>The authors note that OPNFV distinguishes itself from other open
- source compute and networking projects through its emphasis on existing
- "telco" services as opposed to cloud-computing. There are many ways in
- which telco requirements have different emphasis on performance
- dimensions when compared to cloud computing: support for and transfer of
- isochronous media streams is one example.</t>
-
- <t>Note also that the move to NFV Infrastructure has resulted in many
- new benchmarking initiatives across the industry. The authors are
- currently doing their best to maintain alignment with many other
- projects, and this Internet Draft is one part of the efforts. We
- acknowledge the early work in <xref
- target="I-D.huang-bmwg-virtual-network-performance"/>, and useful
- discussion with the authors.</t>
- </section>
-
- <section title="Scope">
- <t>The primary purpose and scope of the memo is to inform the industry
- of work-in-progress that builds on the body of extensive BMWG literature
- and experience, and describe the extensions needed for benchmarking
- virtual switches. Inital feedback indicates that many of these
- extensions may be applicable beyond the current scope (to hardware
- switches in the NFV Infrastructure and to virtual routers, for example).
- Additionally, this memo serves as a vehicle to include more detail and
- commentary from BMWG and other Open Source communities, under BMWG's
- chartered work to characterize the NFV Infrastructure (a virtual switch
- is an important aspect of that infrastructure).</t>
- </section>
-
- <section title="Benchmarking Considerations">
- <t>This section highlights some specific considerations (from <xref
- target="I-D.ietf-bmwg-virtual-net"/>)related to Benchmarks for virtual
- switches. The OPNFV project is sharing its present view on these areas,
- as they develop their specifications in the Level Test Design (LTD)
- document.</t>
-
- <section title="Comparison with Physical Network Functions">
- <t>To compare the performance of virtual designs and implementations
- with their physical counterparts, identical benchmarks are needed.
- BMWG has developed specifications for many network functions this memo
- re-uses existing benchmarks through references, and expands them
- during development of new methods. A key configuration aspect is the
- number of parallel cores required to achieve comparable performance
- with a given physical device, or whether some limit of scale was
- reached before the cores could achieve the comparable level.</t>
-
- <t>It's unlikely that the virtual switch will be the only application
- running on the SUT, so CPU utilization, Cache utilization, and Memory
- footprint should also be recorded for the virtual implementations of
- internetworking functions.</t>
- </section>
-
- <section title="Continued Emphasis on Black-Box Benchmarks">
- <t>External observations remain essential as the basis for Benchmarks.
- Internal observations with fixed specification and interpretation will
- be provided in parallel to assist the development of operations
- procedures when the technology is deployed.</t>
- </section>
-
- <section title="New Configuration Parameters">
- <t>A key consideration when conducting any sort of benchmark is trying
- to ensure the consistency and repeatability of test results. When
- benchmarking the performance of a vSwitch there are many factors that
- can affect the consistency of results, one key factor is matching the
- various hardware and software details of the SUT. This section lists
- some of the many new parameters which this project believes are
- critical to report in order to achieve repeatability.</t>
-
- <t>Hardware details including:</t>
-
- <t><list style="symbols">
- <t>Platform details</t>
-
- <t>Processor details</t>
-
- <t>Memory information (type and size)</t>
-
- <t>Number of enabled cores</t>
-
- <t>Number of cores used for the test</t>
-
- <t>Number of physical NICs, as well as their details
- (manufacturer, versions, type and the PCI slot they are plugged
- into)</t>
-
- <t>NIC interrupt configuration</t>
-
- <t>BIOS version, release date and any configurations that were
- modified</t>
-
- <t>CPU microcode level</t>
-
- <t>Memory DIMM configurations (quad rank performance may not be
- the same as dual rank) in size, freq and slot locations</t>
-
- <t>PCI configuration parameters (payload size, early ack
- option...)</t>
-
- <t>Power management at all levels (ACPI sleep states, processor
- package, OS...)</t>
- </list>Software details including:</t>
-
- <t><list style="symbols">
- <t>OS parameters and behavior (text vs graphical no one typing at
- the console on one system)</t>
-
- <t>OS version (for host and VNF)</t>
-
- <t>Kernel version (for host and VNF)</t>
-
- <t>GRUB boot parameters (for host and VNF)</t>
-
- <t>Hypervisor details (Type and version)</t>
-
- <t>Selected vSwitch, version number or commit id used</t>
-
- <t>vSwitch launch command line if it has been parameterised</t>
-
- <t>Memory allocation to the vSwitch</t>
-
- <t>which NUMA node it is using, and how many memory channels</t>
-
- <t>DPDK or any other SW dependency version number or commit id
- used</t>
-
- <t>Memory allocation to a VM - if it's from Hugpages/elsewhere</t>
-
- <t>VM storage type: snapshot/independent persistent/independent
- non-persistent</t>
-
- <t>Number of VMs</t>
-
- <t>Number of Virtual NICs (vNICs), versions, type and driver</t>
-
- <t>Number of virtual CPUs and their core affinity on the host</t>
-
- <t>Number vNIC interrupt configuration</t>
-
- <t>Thread affinitization for the applications (including the
- vSwitch itself) on the host</t>
-
- <t>Details of Resource isolation, such as CPUs designated for
- Host/Kernel (isolcpu) and CPUs designated for specific processes
- (taskset). - Test duration. - Number of flows.</t>
- </list></t>
-
- <t>Test Traffic Information:<list style="symbols">
- <t>Traffic type - UDP, TCP, IMIX / Other</t>
-
- <t>Packet Sizes</t>
-
- <t>Deployment Scenario</t>
- </list></t>
-
- <t/>
- </section>
-
- <section title="Flow classification">
- <t>Virtual switches group packets into flows by processing and
- matching particular packet or frame header information, or by matching
- packets based on the input ports. Thus a flow can be thought of a
- sequence of packets that have the same set of header field values
- (5-tuple) or have arrived on the same port. Performance results can
- vary based on the parameters the vSwitch uses to match for a flow. The
- recommended flow classification parameters for any vSwitch performance
- tests are: the input port, the source IP address, the destination IP
- address and the Ethernet protocol type field. It is essential to
- increase the flow timeout time on a vSwitch before conducting any
- performance tests that do not measure the flow setup time. Normally
- the first packet of a particular stream will install the flow in the
- virtual switch which adds an additional latency, subsequent packets of
- the same flow are not subject to this latency if the flow is already
- installed on the vSwitch.</t>
- </section>
-
- <section title="Benchmarks using Baselines with Resource Isolation">
- <t>This outline describes measurement of baseline with isolated
- resources at a high level, which is the intended approach at this
- time.</t>
-
- <t><list style="numbers">
- <t>Baselines: <list style="symbols">
- <t>Optional: Benchmark platform forwarding capability without
- a vswitch or VNF for at least 72 hours (serves as a means of
- platform validation and a means to obtain the base performance
- for the platform in terms of its maximum forwarding rate and
- latency). <figure>
- <preamble>Benchmark platform forwarding
- capability</preamble>
-
- <artwork align="right"><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | Simple Forwarding App | | Host
- | | | | |
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmark VNF forwarding capability with direct
- connectivity (vSwitch bypass, e.g., SR/IOV) for at least 72
- hours (serves as a means of VNF validation and a means to
- obtain the base performance for the VNF in terms of its
- maximum forwarding rate and latency). The metrics gathered
- from this test will serve as a key comparison point for
- vSwitch bypass technologies performance and vSwitch
- performance. <figure align="right">
- <preamble>Benchmark VNF forwarding capability</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | VNF | | |
- | | | | |
- | +------------------------------------------+ | |
- | | Passthrough/SR-IOV | | Host
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmarking with isolated resources alone, with other
- resources (both HW&amp;SW) disabled Example, vSw and VM are
- SUT</t>
-
- <t>Benchmarking with isolated resources alone, leaving some
- resources unused</t>
-
- <t>Benchmark with isolated resources and all resources
- occupied</t>
- </list></t>
-
- <t>Next Steps<list style="symbols">
- <t>Limited sharing</t>
-
- <t>Production scenarios</t>
-
- <t>Stressful scenarios</t>
- </list></t>
- </list></t>
- </section>
- </section>
-
- <section title="VSWITCHPERF Specification Summary">
- <t>The overall specification in preparation is referred to as a Level
- Test Design (LTD) document, which will contain a suite of performance
- tests. The base performance tests in the LTD are based on the
- pre-existing specifications developed by BMWG to test the performance of
- physical switches. These specifications include:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2544"/> Benchmarking Methodology for Network
- Interconnect Devices</t>
-
- <t><xref target="RFC2889"/> Benchmarking Methodology for LAN
- Switching</t>
-
- <t><xref target="RFC6201"/> Device Reset Characterization</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t>Some of the above/newer RFCs are being applied in benchmarking for
- the first time, and represent a development challenge for test equipment
- developers. Fortunately, many members of the testing system community
- have engaged on the VSPERF project, including an open source test
- system.</t>
-
- <t>In addition to this, the LTD also re-uses the terminology defined
- by:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2285"/> Benchmarking Terminology for LAN
- Switching Devices</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t/>
-
- <t>Specifications to be included in future updates of the LTD
- include:<list style="symbols">
- <t><xref target="RFC3918"/> Methodology for IP Multicast
- Benchmarking</t>
-
- <t><xref target="RFC4737"/> Packet Reordering Metrics</t>
- </list></t>
-
- <t>As one might expect, the most fundamental internetworking
- characteristics of Throughput and Latency remain important when the
- switch is virtualized, and these benchmarks figure prominently in the
- specification.</t>
-
- <t>When considering characteristics important to "telco" network
- functions, we must begin to consider additional performance metrics. In
- this case, the project specifications have referenced metrics from the
- IETF IP Performance Metrics (IPPM) literature. This means that the <xref
- target="RFC2544"/> test of Latency is replaced by measurement of a
- metric derived from IPPM's <xref target="RFC2679"/>, where a set of
- statistical summaries will be provided (mean, max, min, etc.). Further
- metrics planned to be benchmarked include packet delay variation as
- defined by <xref target="RFC5481"/> , reordering, burst behaviour, DUT
- availability, DUT capacity and packet loss in long term testing at
- Throughput level, where some low-level of background loss may be present
- and characterized.</t>
-
- <t>Tests have been (or will be) designed to collect the metrics
- below:</t>
-
- <t><list style="symbols">
- <t>Throughput Tests to measure the maximum forwarding rate (in
- frames per second or fps) and bit rate (in Mbps) for a constant load
- (as defined by <xref target="RFC1242"/>) without traffic loss.</t>
-
- <t>Packet and Frame Delay Distribution Tests to measure average, min
- and max packet and frame delay for constant loads.</t>
-
- <t>Packet Delay Tests to understand latency distribution for
- different packet sizes and over an extended test run to uncover
- outliers.</t>
-
- <t>Scalability Tests to understand how the virtual switch performs
- as the number of flows, active ports, complexity of the forwarding
- logic&rsquo;s configuration&hellip; it has to deal with
- increases.</t>
-
- <t>Stream Performance Tests (TCP, UDP) to measure bulk data transfer
- performance, i.e. how fast systems can send and receive data through
- the switch.</t>
-
- <t>Control Path and Datapath Coupling Tests, to understand how
- closely coupled the datapath and the control path are as well as the
- effect of this coupling on the performance of the DUT (example:
- delay of the initial packet of a flow).</t>
-
- <t>CPU and Memory Consumption Tests to understand the virtual
- switch&rsquo;s footprint on the system, usually conducted as
- auxiliary measurements with benchmarks above. They include: CPU
- utilization, Cache utilization and Memory footprint.</t>
-
- <t>The so-called "Soak" tests, where the selected test is conducted
- over a long period of time (with an ideal duration of 24 hours, and
- at least 6 hours). The purpose of soak tests is to capture transient
- changes in performance which may occur due to infrequent processes
- or the low probability coincidence of two or more processes. The
- performance must be evaluated periodically during continuous
- testing, and this results in use of <xref target="RFC2889"/> Frame
- Rate metrics instead of <xref target="RFC2544"/> Throughput (which
- requires stopping traffic to allow time for all traffic to exit
- internal queues).</t>
- </list></t>
-
- <t>Future/planned test specs include:<list style="symbols">
- <t>Request/Response Performance Tests (TCP, UDP) which measure the
- transaction rate through the switch.</t>
-
- <t>Noisy Neighbour Tests, to understand the effects of resource
- sharing on the performance of a virtual switch.</t>
-
- <t>Tests derived from examination of ETSI NFV Draft GS IFA003
- requirements <xref target="IFA003"/> on characterization of
- acceleration technologies applied to vswitches.</t>
- </list>The flexibility of deployment of a virtual switch within a
- network means that the BMWG IETF existing literature needs to be used to
- characterize the performance of a switch in various deployment
- scenarios. The deployment scenarios under consideration include:</t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to physical
- port</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +--------------------+ | |
- | | | | |
- | | v | | Host
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure></t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ : | |
- | | | | | Guest
- | : v | |
- | +---------------+ +---------------+ | |
- | | logical port 0| | logical port 1| | |
- +---+---------------+-----------+---------------+---+ __|
- ^ :
- | |
- : v __
- +---+---------------+----------+---------------+---+ |
- | | logical port 0| | logical port 1| | |
- | +---------------+ +---------------+ | |
- | ^ : | |
- | | | | | Host
- | : v | |
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | |
- | | v | | | v | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 1 | | | | 0 1 | | |
- +---+---------------+--+ +---+---------------+--+__|
- ^ : ^ :
- | | | |
- : v : v _
- +---+---------------+---------+---------------+--+ |
- | | 0 1 | | 3 4 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | ^ | ^ | | | Host
- | | |-----------------| v | |
- | +--------------+ +--------------+ | |
- | | phy ports | vSwitch | phy ports | | |
- +---+--------------+----------+--------------+---+_|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ | |
- | | | | Guest
- | : | |
- | +---------------+ | |
- | | logical port 0| | |
- +---+---------------+-------------------------------+ __|
- ^
- |
- : __
- +---+---------------+------------------------------+ |
- | | logical port 0| | |
- | +---------------+ | |
- | ^ | |
- | | | | Host
- | : | |
- | +--------------+ | |
- | | phy port | vSwitch | |
- +---+--------------+------------ -------------- ---+ __|
- ^
- |
- :
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | : | |
- | | | | Guest
- | v | |
- | +---------------+ | |
- | | logical port | | |
- +-------------------------------+---------------+---+ __|
- :
- |
- v __
- +------------------------------+---------------+---+ |
- | | logical port | | |
- | +---------------+ | |
- | : | |
- | | | | Host
- | v | |
- | +--------------+ | |
- | vSwitch | phy port | | |
- +-------------------------------+--------------+---+ __|
- :
- |
- v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | | | | ^ | |
- | v | | | | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 | | | | 0 | | |
- +---+---------------+--+ +---+---------------+--+__|
- : ^
- | |
- v : _
- +---+---------------+---------+---------------+--+ |
- | | 1 | | 1 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | | ^ | | Host
- | L-----------------+ | |
- | | |
- | vSwitch | |
- +------------------------------------------------+_|]]></artwork>
- </figure></t>
-
- <t>A set of Deployment Scenario figures is available on the VSPERF Test
- Methodology Wiki page <xref target="TestTopo"/>.</t>
- </section>
-
- <section title="3x3 Matrix Coverage">
- <t>This section organizes the many existing test specifications into the
- "3x3" matrix (introduced in <xref target="I-D.ietf-bmwg-virtual-net"/>).
- Because the LTD specification ID names are quite long, this section is
- organized into lists for each occupied cell of the matrix (not all are
- occupied, also the matrix has grown to 3x4 to accommodate scale metrics
- when displaying the coverage of many metrics/benchmarks). The current
- version of the LTD specification is available <xref target="LTD"/>.</t>
-
- <t>The tests listed below assess the activation of paths in the data
- plane, rather than the control plane.</t>
-
- <t>A complete list of tests with short summaries is available on the
- VSPERF "LTD Test Spec Overview" Wiki page <xref target="LTDoverV"/>.</t>
-
- <section title="Speed of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressLearningRate</t>
-
- <t>PacketLatency.InitialPacketProcessingLatency</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Activation section">
- <t><list style="symbols">
- <t>CPDP.Coupling.Flow.Addition</t>
- </list></t>
- </section>
-
- <section title="Reliability of Activation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.SystemRecoveryTime</t>
-
- <t>Throughput.RFC2544.ResetTime</t>
- </list></t>
- </section>
-
- <section title="Scale of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressCachingCapacity</t>
- </list></t>
- </section>
-
- <section title="Speed of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.PacketLossRate</t>
-
- <t>CPU.RFC2544.0PacketLoss</t>
-
- <t>Throughput.RFC2544.PacketLossRateFrameModification</t>
-
- <t>Throughput.RFC2544.BackToBackFrames</t>
-
- <t>Throughput.RFC2889.MaxForwardingRate</t>
-
- <t>Throughput.RFC2889.ForwardPressure</t>
-
- <t>Throughput.RFC2889.BroadcastFrameForwarding</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.ErrorFramesFiltering</t>
-
- <t>Throughput.RFC2544.Profile</t>
- </list></t>
- </section>
-
- <section title="Reliability of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.Soak</t>
-
- <t>Throughput.RFC2889.SoakFrameModification</t>
-
- <t>PacketDelayVariation.RFC3393.Soak</t>
- </list></t>
- </section>
-
- <section title="Scalability of Operation">
- <t><list style="symbols">
- <t>Scalability.RFC2544.0PacketLoss</t>
-
- <t>MemoryBandwidth.RFC2544.0PacketLoss.Scalability</t>
- </list></t>
- </section>
-
- <section title="Summary">
- <t><figure>
- <artwork><![CDATA[|------------------------------------------------------------------------|
-| | | | | |
-| | SPEED | ACCURACY | RELIABILITY | SCALE |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Activation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Operation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| De-activation | | | | |
-| | | | | |
-|------------------------------------------------------------------------|]]></artwork>
- </figure></t>
- </section>
- </section>
-
- <section title="Security Considerations">
- <t>Benchmarking activities as described in this memo are limited to
- technology characterization of a Device Under Test/System Under Test
- (DUT/SUT) using controlled stimuli in a laboratory environment, with
- dedicated address space and the constraints specified in the sections
- above.</t>
-
- <t>The benchmarking network topology will be an independent test setup
- and MUST NOT be connected to devices that may forward the test traffic
- into a production network, or misroute traffic to the test management
- network.</t>
-
- <t>Further, benchmarking is performed on a "black-box" basis, relying
- solely on measurements observable external to the DUT/SUT.</t>
-
- <t>Special capabilities SHOULD NOT exist in the DUT/SUT specifically for
- benchmarking purposes. Any implications for network security arising
- from the DUT/SUT SHOULD be identical in the lab and in production
- networks.</t>
- </section>
-
- <section anchor="IANA" title="IANA Considerations">
- <t>No IANA Action is requested at this time.</t>
- </section>
-
- <section title="Acknowledgements">
- <t>The authors appreciate and acknowledge comments from Scott Bradner,
- Marius Georgescu, Ramki Krishnan, Doug Montgomery, Martin Klozik,
- Christian Trautman, and others for their reviews.</t>
- </section>
- </middle>
-
- <back>
- <references title="Normative References">
- <?rfc ?>
-
- <?rfc include="reference.RFC.2119"?>
-
- <?rfc ?>
-
- <?rfc include="reference.RFC.2330"?>
-
- <?rfc include='reference.RFC.2544'?>
-
- <?rfc include="reference.RFC.2679"?>
-
- <?rfc include='reference.RFC.2680'?>
-
- <?rfc include='reference.RFC.3393'?>
-
- <?rfc include='reference.RFC.3432'?>
-
- <?rfc include='reference.RFC.2681'?>
-
- <?rfc include='reference.RFC.5905'?>
-
- <?rfc include='reference.RFC.4689'?>
-
- <?rfc include='reference.RFC.4737'?>
-
- <?rfc include='reference.RFC.5357'?>
-
- <?rfc include='reference.RFC.2889'?>
-
- <?rfc include='reference.RFC.3918'?>
-
- <?rfc include='reference.RFC.6201'?>
-
- <?rfc include='reference.RFC.2285'?>
-
- <reference anchor="NFV.PER001">
- <front>
- <title>Network Function Virtualization: Performance and Portability
- Best Practices</title>
-
- <author fullname="ETSI NFV" initials="" surname="">
- <organization/>
- </author>
-
- <date month="June" year="2014"/>
- </front>
-
- <seriesInfo name="Group Specification"
- value="ETSI GS NFV-PER 001 V1.1.1 (2014-06)"/>
-
- <format type="PDF"/>
- </reference>
- </references>
-
- <references title="Informative References">
- <?rfc include='reference.RFC.1242'?>
-
- <?rfc include='reference.RFC.5481'?>
-
- <?rfc include='reference.RFC.6049'?>
-
- <?rfc include='reference.RFC.6248'?>
-
- <?rfc include='reference.RFC.6390'?>
-
- <?rfc include='reference.I-D.ietf-bmwg-virtual-net'?>
-
- <?rfc include='reference.I-D.huang-bmwg-virtual-network-performance'?>
-
- <reference anchor="TestTopo">
- <front>
- <title>Test Topologies
- https://wiki.opnfv.org/vsperf/test_methodology</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="LTDoverV">
- <front>
- <title>LTD Test Spec Overview
- https://wiki.opnfv.org/wiki/vswitchperf_test_spec_review</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="LTD">
- <front>
- <title>LTD Test Specification
- http://artifacts.opnfv.org/vswitchperf/docs/requirements/index.html</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="BrahRel">
- <front>
- <title>Brahmaputra, Second OPNFV Release
- https://www.opnfv.org/brahmaputra</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="IFA003">
- <front>
- <title>https://docbox.etsi.org/ISG/NFV/Open/Drafts/IFA003_Acceleration_-_vSwitch_Spec/</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
- </references>
- </back>
-</rfc>
diff --git a/docs/testing/developer/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-01.xml b/docs/testing/developer/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-01.xml
deleted file mode 100644
index c8a3d99b..00000000
--- a/docs/testing/developer/requirements/ietf_draft/draft-ietf-bmwg-vswitch-opnfv-01.xml
+++ /dev/null
@@ -1,1027 +0,0 @@
-<?xml version="1.0" encoding="US-ASCII"?>
-<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
-<?rfc toc="yes"?>
-<?rfc tocompact="yes"?>
-<?rfc tocdepth="3"?>
-<?rfc tocindent="yes"?>
-<?rfc symrefs="yes"?>
-<?rfc sortrefs="yes"?>
-<?rfc comments="yes"?>
-<?rfc inline="yes"?>
-<?rfc compact="yes"?>
-<?rfc subcompact="no"?>
-<rfc category="info" docName="draft-ietf-bmwg-vswitch-opnfv-01"
- ipr="trust200902">
- <front>
- <title abbrev="Benchmarking vSwitches">Benchmarking Virtual Switches in
- OPNFV</title>
-
- <author fullname="Maryam Tahhan" initials="M." surname="Tahhan">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>maryam.tahhan@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Billy O'Mahony" initials="B." surname="O'Mahony">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>billy.o.mahony@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Al Morton" initials="A." surname="Morton">
- <organization>AT&amp;T Labs</organization>
-
- <address>
- <postal>
- <street>200 Laurel Avenue South</street>
-
- <city>Middletown,</city>
-
- <region>NJ</region>
-
- <code>07748</code>
-
- <country>USA</country>
- </postal>
-
- <phone>+1 732 420 1571</phone>
-
- <facsimile>+1 732 368 1192</facsimile>
-
- <email>acmorton@att.com</email>
-
- <uri>http://home.comcast.net/~acmacm/</uri>
- </address>
- </author>
-
- <date day="10" month="October" year="2016"/>
-
- <abstract>
- <t>This memo describes the progress of the Open Platform for NFV (OPNFV)
- project on virtual switch performance "VSWITCHPERF". This project
- intends to build on the current and completed work of the Benchmarking
- Methodology Working Group in IETF, by referencing existing literature.
- The Benchmarking Methodology Working Group has traditionally conducted
- laboratory characterization of dedicated physical implementations of
- internetworking functions. Therefore, this memo begins to describe the
- additional considerations when virtual switches are implemented in
- general-purpose hardware. The expanded tests and benchmarks are also
- influenced by the OPNFV mission to support virtualization of the "telco"
- infrastructure.</t>
- </abstract>
-
- <note title="Requirements Language">
- <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
- "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
- document are to be interpreted as described in <xref
- target="RFC2119">RFC 2119</xref>.</t>
-
- <t/>
- </note>
- </front>
-
- <middle>
- <section title="Introduction">
- <t>Benchmarking Methodology Working Group (BMWG) has traditionally
- conducted laboratory characterization of dedicated physical
- implementations of internetworking functions. The Black-box Benchmarks
- of Throughput, Latency, Forwarding Rates and others have served our
- industry for many years. Now, Network Function Virtualization (NFV) has
- the goal to transform how internetwork functions are implemented, and
- therefore has garnered much attention.</t>
-
- <t>This memo summarizes the progress of the Open Platform for NFV
- (OPNFV) project on virtual switch performance characterization,
- "VSWITCHPERF", through the Brahmaputra (second) release <xref
- target="BrahRel"/>. This project intends to build on the current and
- completed work of the Benchmarking Methodology Working Group in IETF, by
- referencing existing literature. For example, currently the most often
- referenced RFC is <xref target="RFC2544"/> (which depends on <xref
- target="RFC1242"/>) and foundation of the benchmarking work in OPNFV is
- common and strong.</t>
-
- <t>See
- https://wiki.opnfv.org/characterize_vswitch_performance_for_telco_nfv_use_cases
- for more background, and the OPNFV website for general information:
- https://www.opnfv.org/</t>
-
- <t>The authors note that OPNFV distinguishes itself from other open
- source compute and networking projects through its emphasis on existing
- "telco" services as opposed to cloud-computing. There are many ways in
- which telco requirements have different emphasis on performance
- dimensions when compared to cloud computing: support for and transfer of
- isochronous media streams is one example.</t>
-
- <t>Note also that the move to NFV Infrastructure has resulted in many
- new benchmarking initiatives across the industry. The authors are
- currently doing their best to maintain alignment with many other
- projects, and this Internet Draft is one part of the efforts. We
- acknowledge the early work in <xref
- target="I-D.huang-bmwg-virtual-network-performance"/>, and useful
- discussion with the authors.</t>
- </section>
-
- <section title="Scope">
- <t>The primary purpose and scope of the memo is to inform the industry
- of work-in-progress that builds on the body of extensive BMWG literature
- and experience, and describe the extensions needed for benchmarking
- virtual switches. Inital feedback indicates that many of these
- extensions may be applicable beyond the current scope (to hardware
- switches in the NFV Infrastructure and to virtual routers, for example).
- Additionally, this memo serves as a vehicle to include more detail and
- commentary from BMWG and other Open Source communities, under BMWG's
- chartered work to characterize the NFV Infrastructure (a virtual switch
- is an important aspect of that infrastructure).</t>
-
- <t>The benchmarking covered in this memo should be applicable to many
- types of vswitches, and remain vswitch-agnostic to great degree. There
- has been no attempt to track and test all features of any specific
- vswitch implementation.</t>
- </section>
-
- <section title="Benchmarking Considerations">
- <t>This section highlights some specific considerations (from <xref
- target="I-D.ietf-bmwg-virtual-net"/>)related to Benchmarks for virtual
- switches. The OPNFV project is sharing its present view on these areas,
- as they develop their specifications in the Level Test Design (LTD)
- document.</t>
-
- <section title="Comparison with Physical Network Functions">
- <t>To compare the performance of virtual designs and implementations
- with their physical counterparts, identical benchmarks are needed.
- BMWG has developed specifications for many network functions this memo
- re-uses existing benchmarks through references, and expands them
- during development of new methods. A key configuration aspect is the
- number of parallel cores required to achieve comparable performance
- with a given physical device, or whether some limit of scale was
- reached before the cores could achieve the comparable level.</t>
-
- <t>It's unlikely that the virtual switch will be the only application
- running on the SUT, so CPU utilization, Cache utilization, and Memory
- footprint should also be recorded for the virtual implementations of
- internetworking functions.</t>
- </section>
-
- <section title="Continued Emphasis on Black-Box Benchmarks">
- <t>External observations remain essential as the basis for Benchmarks.
- Internal observations with fixed specification and interpretation will
- be provided in parallel to assist the development of operations
- procedures when the technology is deployed.</t>
- </section>
-
- <section title="New Configuration Parameters">
- <t>A key consideration when conducting any sort of benchmark is trying
- to ensure the consistency and repeatability of test results. When
- benchmarking the performance of a vSwitch there are many factors that
- can affect the consistency of results, one key factor is matching the
- various hardware and software details of the SUT. This section lists
- some of the many new parameters which this project believes are
- critical to report in order to achieve repeatability.</t>
-
- <t>Hardware details including:</t>
-
- <t><list style="symbols">
- <t>Platform details</t>
-
- <t>Processor details</t>
-
- <t>Memory information (type and size)</t>
-
- <t>Number of enabled cores</t>
-
- <t>Number of cores used for the test</t>
-
- <t>Number of physical NICs, as well as their details
- (manufacturer, versions, type and the PCI slot they are plugged
- into)</t>
-
- <t>NIC interrupt configuration</t>
-
- <t>BIOS version, release date and any configurations that were
- modified</t>
-
- <t>CPU microcode level</t>
-
- <t>Memory DIMM configurations (quad rank performance may not be
- the same as dual rank) in size, freq and slot locations</t>
-
- <t>PCI configuration parameters (payload size, early ack
- option...)</t>
-
- <t>Power management at all levels (ACPI sleep states, processor
- package, OS...)</t>
- </list>Software details including:</t>
-
- <t><list style="symbols">
- <t>OS parameters and behavior (text vs graphical no one typing at
- the console on one system)</t>
-
- <t>OS version (for host and VNF)</t>
-
- <t>Kernel version (for host and VNF)</t>
-
- <t>GRUB boot parameters (for host and VNF)</t>
-
- <t>Hypervisor details (Type and version)</t>
-
- <t>Selected vSwitch, version number or commit id used</t>
-
- <t>vSwitch launch command line if it has been parameterised</t>
-
- <t>Memory allocation to the vSwitch</t>
-
- <t>which NUMA node it is using, and how many memory channels</t>
-
- <t>DPDK or any other SW dependency version number or commit id
- used</t>
-
- <t>Memory allocation to a VM - if it's from Hugpages/elsewhere</t>
-
- <t>VM storage type: snapshot/independent persistent/independent
- non-persistent</t>
-
- <t>Number of VMs</t>
-
- <t>Number of Virtual NICs (vNICs), versions, type and driver</t>
-
- <t>Number of virtual CPUs and their core affinity on the host</t>
-
- <t>Number vNIC interrupt configuration</t>
-
- <t>Thread affinitization for the applications (including the
- vSwitch itself) on the host</t>
-
- <t>Details of Resource isolation, such as CPUs designated for
- Host/Kernel (isolcpu) and CPUs designated for specific processes
- (taskset). - Test duration. - Number of flows.</t>
- </list></t>
-
- <t>Test Traffic Information:<list style="symbols">
- <t>Traffic type - UDP, TCP, IMIX / Other</t>
-
- <t>Packet Sizes</t>
-
- <t>Deployment Scenario</t>
- </list></t>
-
- <t/>
- </section>
-
- <section title="Flow classification">
- <t>Virtual switches group packets into flows by processing and
- matching particular packet or frame header information, or by matching
- packets based on the input ports. Thus a flow can be thought of a
- sequence of packets that have the same set of header field values
- (5-tuple) or have arrived on the same port. Performance results can
- vary based on the parameters the vSwitch uses to match for a flow. The
- recommended flow classification parameters for any vSwitch performance
- tests are: the input port, the source IP address, the destination IP
- address and the Ethernet protocol type field. It is essential to
- increase the flow timeout time on a vSwitch before conducting any
- performance tests that do not measure the flow setup time. Normally
- the first packet of a particular stream will install the flow in the
- virtual switch which adds an additional latency, subsequent packets of
- the same flow are not subject to this latency if the flow is already
- installed on the vSwitch.</t>
- </section>
-
- <section title="Benchmarks using Baselines with Resource Isolation">
- <t>This outline describes measurement of baseline with isolated
- resources at a high level, which is the intended approach at this
- time.</t>
-
- <t><list style="numbers">
- <t>Baselines: <list style="symbols">
- <t>Optional: Benchmark platform forwarding capability without
- a vswitch or VNF for at least 72 hours (serves as a means of
- platform validation and a means to obtain the base performance
- for the platform in terms of its maximum forwarding rate and
- latency). <figure>
- <preamble>Benchmark platform forwarding
- capability</preamble>
-
- <artwork align="right"><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | Simple Forwarding App | | Host
- | | | | |
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmark VNF forwarding capability with direct
- connectivity (vSwitch bypass, e.g., SR/IOV) for at least 72
- hours (serves as a means of VNF validation and a means to
- obtain the base performance for the VNF in terms of its
- maximum forwarding rate and latency). The metrics gathered
- from this test will serve as a key comparison point for
- vSwitch bypass technologies performance and vSwitch
- performance. <figure align="right">
- <preamble>Benchmark VNF forwarding capability</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | VNF | | |
- | | | | |
- | +------------------------------------------+ | |
- | | Passthrough/SR-IOV | | Host
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmarking with isolated resources alone, with other
- resources (both HW&amp;SW) disabled Example, vSw and VM are
- SUT</t>
-
- <t>Benchmarking with isolated resources alone, leaving some
- resources unused</t>
-
- <t>Benchmark with isolated resources and all resources
- occupied</t>
- </list></t>
-
- <t>Next Steps<list style="symbols">
- <t>Limited sharing</t>
-
- <t>Production scenarios</t>
-
- <t>Stressful scenarios</t>
- </list></t>
- </list></t>
- </section>
- </section>
-
- <section title="VSWITCHPERF Specification Summary">
- <t>The overall specification in preparation is referred to as a Level
- Test Design (LTD) document, which will contain a suite of performance
- tests. The base performance tests in the LTD are based on the
- pre-existing specifications developed by BMWG to test the performance of
- physical switches. These specifications include:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2544"/> Benchmarking Methodology for Network
- Interconnect Devices</t>
-
- <t><xref target="RFC2889"/> Benchmarking Methodology for LAN
- Switching</t>
-
- <t><xref target="RFC6201"/> Device Reset Characterization</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t>Some of the above/newer RFCs are being applied in benchmarking for
- the first time, and represent a development challenge for test equipment
- developers. Fortunately, many members of the testing system community
- have engaged on the VSPERF project, including an open source test
- system.</t>
-
- <t>In addition to this, the LTD also re-uses the terminology defined
- by:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2285"/> Benchmarking Terminology for LAN
- Switching Devices</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t/>
-
- <t>Specifications to be included in future updates of the LTD
- include:<list style="symbols">
- <t><xref target="RFC3918"/> Methodology for IP Multicast
- Benchmarking</t>
-
- <t><xref target="RFC4737"/> Packet Reordering Metrics</t>
- </list></t>
-
- <t>As one might expect, the most fundamental internetworking
- characteristics of Throughput and Latency remain important when the
- switch is virtualized, and these benchmarks figure prominently in the
- specification.</t>
-
- <t>When considering characteristics important to "telco" network
- functions, we must begin to consider additional performance metrics. In
- this case, the project specifications have referenced metrics from the
- IETF IP Performance Metrics (IPPM) literature. This means that the <xref
- target="RFC2544"/> test of Latency is replaced by measurement of a
- metric derived from IPPM's <xref target="RFC2679"/>, where a set of
- statistical summaries will be provided (mean, max, min, etc.). Further
- metrics planned to be benchmarked include packet delay variation as
- defined by <xref target="RFC5481"/> , reordering, burst behaviour, DUT
- availability, DUT capacity and packet loss in long term testing at
- Throughput level, where some low-level of background loss may be present
- and characterized.</t>
-
- <t>Tests have been (or will be) designed to collect the metrics
- below:</t>
-
- <t><list style="symbols">
- <t>Throughput Tests to measure the maximum forwarding rate (in
- frames per second or fps) and bit rate (in Mbps) for a constant load
- (as defined by <xref target="RFC1242"/>) without traffic loss.</t>
-
- <t>Packet and Frame Delay Distribution Tests to measure average, min
- and max packet and frame delay for constant loads.</t>
-
- <t>Packet Delay Tests to understand latency distribution for
- different packet sizes and over an extended test run to uncover
- outliers.</t>
-
- <t>Scalability Tests to understand how the virtual switch performs
- as the number of flows, active ports, complexity of the forwarding
- logic&rsquo;s configuration&hellip; it has to deal with
- increases.</t>
-
- <t>Stream Performance Tests (TCP, UDP) to measure bulk data transfer
- performance, i.e. how fast systems can send and receive data through
- the switch.</t>
-
- <t>Control Path and Datapath Coupling Tests, to understand how
- closely coupled the datapath and the control path are as well as the
- effect of this coupling on the performance of the DUT (example:
- delay of the initial packet of a flow).</t>
-
- <t>CPU and Memory Consumption Tests to understand the virtual
- switch&rsquo;s footprint on the system, usually conducted as
- auxiliary measurements with benchmarks above. They include: CPU
- utilization, Cache utilization and Memory footprint.</t>
-
- <t>The so-called "Soak" tests, where the selected test is conducted
- over a long period of time (with an ideal duration of 24 hours, but
- only long enough to determine that stability issues exist when
- found; there is no requirement to continue a test when a DUT
- exhibits instability over time). The key performance characteristics
- and benchmarks for a DUT are determined (using short duration tests)
- prior to conducting soak tests. The purpose of soak tests is to
- capture transient changes in performance which may occur due to
- infrequent processes, memory leaks, or the low probability
- coincidence of two or more processes. The stability of the DUT is
- the paramount consideration, so performance must be evaluated
- periodically during continuous testing, and this results in use of
- <xref target="RFC2889"/> Frame Rate metrics instead of <xref
- target="RFC2544"/> Throughput (which requires stopping traffic to
- allow time for all traffic to exit internal queues), for
- example.</t>
- </list></t>
-
- <t>Future/planned test specs include:<list style="symbols">
- <t>Request/Response Performance Tests (TCP, UDP) which measure the
- transaction rate through the switch.</t>
-
- <t>Noisy Neighbour Tests, to understand the effects of resource
- sharing on the performance of a virtual switch.</t>
-
- <t>Tests derived from examination of ETSI NFV Draft GS IFA003
- requirements <xref target="IFA003"/> on characterization of
- acceleration technologies applied to vswitches.</t>
- </list>The flexibility of deployment of a virtual switch within a
- network means that the BMWG IETF existing literature needs to be used to
- characterize the performance of a switch in various deployment
- scenarios. The deployment scenarios under consideration include:</t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to physical
- port</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +--------------------+ | |
- | | | | |
- | | v | | Host
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure></t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ : | |
- | | | | | Guest
- | : v | |
- | +---------------+ +---------------+ | |
- | | logical port 0| | logical port 1| | |
- +---+---------------+-----------+---------------+---+ __|
- ^ :
- | |
- : v __
- +---+---------------+----------+---------------+---+ |
- | | logical port 0| | logical port 1| | |
- | +---------------+ +---------------+ | |
- | ^ : | |
- | | | | | Host
- | : v | |
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | |
- | | v | | | v | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 1 | | | | 0 1 | | |
- +---+---------------+--+ +---+---------------+--+__|
- ^ : ^ :
- | | | |
- : v : v _
- +---+---------------+---------+---------------+--+ |
- | | 0 1 | | 3 4 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | ^ | ^ | | | Host
- | | |-----------------| v | |
- | +--------------+ +--------------+ | |
- | | phy ports | vSwitch | phy ports | | |
- +---+--------------+----------+--------------+---+_|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ | |
- | | | | Guest
- | : | |
- | +---------------+ | |
- | | logical port 0| | |
- +---+---------------+-------------------------------+ __|
- ^
- |
- : __
- +---+---------------+------------------------------+ |
- | | logical port 0| | |
- | +---------------+ | |
- | ^ | |
- | | | | Host
- | : | |
- | +--------------+ | |
- | | phy port | vSwitch | |
- +---+--------------+------------ -------------- ---+ __|
- ^
- |
- :
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | : | |
- | | | | Guest
- | v | |
- | +---------------+ | |
- | | logical port | | |
- +-------------------------------+---------------+---+ __|
- :
- |
- v __
- +------------------------------+---------------+---+ |
- | | logical port | | |
- | +---------------+ | |
- | : | |
- | | | | Host
- | v | |
- | +--------------+ | |
- | vSwitch | phy port | | |
- +-------------------------------+--------------+---+ __|
- :
- |
- v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | | | | ^ | |
- | v | | | | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 | | | | 0 | | |
- +---+---------------+--+ +---+---------------+--+__|
- : ^
- | |
- v : _
- +---+---------------+---------+---------------+--+ |
- | | 1 | | 1 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | | ^ | | Host
- | L-----------------+ | |
- | | |
- | vSwitch | |
- +------------------------------------------------+_|]]></artwork>
- </figure></t>
-
- <t>A set of Deployment Scenario figures is available on the VSPERF Test
- Methodology Wiki page <xref target="TestTopo"/>.</t>
- </section>
-
- <section title="3x3 Matrix Coverage">
- <t>This section organizes the many existing test specifications into the
- "3x3" matrix (introduced in <xref target="I-D.ietf-bmwg-virtual-net"/>).
- Because the LTD specification ID names are quite long, this section is
- organized into lists for each occupied cell of the matrix (not all are
- occupied, also the matrix has grown to 3x4 to accommodate scale metrics
- when displaying the coverage of many metrics/benchmarks). The current
- version of the LTD specification is available <xref target="LTD"/>.</t>
-
- <t>The tests listed below assess the activation of paths in the data
- plane, rather than the control plane.</t>
-
- <t>A complete list of tests with short summaries is available on the
- VSPERF "LTD Test Spec Overview" Wiki page <xref target="LTDoverV"/>.</t>
-
- <section title="Speed of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressLearningRate</t>
-
- <t>PacketLatency.InitialPacketProcessingLatency</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Activation section">
- <t><list style="symbols">
- <t>CPDP.Coupling.Flow.Addition</t>
- </list></t>
- </section>
-
- <section title="Reliability of Activation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.SystemRecoveryTime</t>
-
- <t>Throughput.RFC2544.ResetTime</t>
- </list></t>
- </section>
-
- <section title="Scale of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressCachingCapacity</t>
- </list></t>
- </section>
-
- <section title="Speed of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.PacketLossRate</t>
-
- <t>CPU.RFC2544.0PacketLoss</t>
-
- <t>Throughput.RFC2544.PacketLossRateFrameModification</t>
-
- <t>Throughput.RFC2544.BackToBackFrames</t>
-
- <t>Throughput.RFC2889.MaxForwardingRate</t>
-
- <t>Throughput.RFC2889.ForwardPressure</t>
-
- <t>Throughput.RFC2889.BroadcastFrameForwarding</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.ErrorFramesFiltering</t>
-
- <t>Throughput.RFC2544.Profile</t>
- </list></t>
- </section>
-
- <section title="Reliability of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.Soak</t>
-
- <t>Throughput.RFC2889.SoakFrameModification</t>
-
- <t>PacketDelayVariation.RFC3393.Soak</t>
- </list></t>
- </section>
-
- <section title="Scalability of Operation">
- <t><list style="symbols">
- <t>Scalability.RFC2544.0PacketLoss</t>
-
- <t>MemoryBandwidth.RFC2544.0PacketLoss.Scalability</t>
- </list></t>
- </section>
-
- <section title="Summary">
- <t><figure>
- <artwork><![CDATA[|------------------------------------------------------------------------|
-| | | | | |
-| | SPEED | ACCURACY | RELIABILITY | SCALE |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Activation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Operation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| De-activation | | | | |
-| | | | | |
-|------------------------------------------------------------------------|]]></artwork>
- </figure></t>
- </section>
- </section>
-
- <section title="Security Considerations">
- <t>Benchmarking activities as described in this memo are limited to
- technology characterization of a Device Under Test/System Under Test
- (DUT/SUT) using controlled stimuli in a laboratory environment, with
- dedicated address space and the constraints specified in the sections
- above.</t>
-
- <t>The benchmarking network topology will be an independent test setup
- and MUST NOT be connected to devices that may forward the test traffic
- into a production network, or misroute traffic to the test management
- network.</t>
-
- <t>Further, benchmarking is performed on a "black-box" basis, relying
- solely on measurements observable external to the DUT/SUT.</t>
-
- <t>Special capabilities SHOULD NOT exist in the DUT/SUT specifically for
- benchmarking purposes. Any implications for network security arising
- from the DUT/SUT SHOULD be identical in the lab and in production
- networks.</t>
- </section>
-
- <section anchor="IANA" title="IANA Considerations">
- <t>No IANA Action is requested at this time.</t>
- </section>
-
- <section title="Acknowledgements">
- <t>The authors appreciate and acknowledge comments from Scott Bradner,
- Marius Georgescu, Ramki Krishnan, Doug Montgomery, Martin Klozik,
- Christian Trautman, and others for their reviews.</t>
- </section>
- </middle>
-
- <back>
- <references title="Normative References">
- <?rfc ?>
-
- <?rfc include="reference.RFC.2119"?>
-
- <?rfc ?>
-
- <?rfc include="reference.RFC.2330"?>
-
- <?rfc include='reference.RFC.2544'?>
-
- <?rfc include="reference.RFC.2679"?>
-
- <?rfc include='reference.RFC.2680'?>
-
- <?rfc include='reference.RFC.3393'?>
-
- <?rfc include='reference.RFC.3432'?>
-
- <?rfc include='reference.RFC.2681'?>
-
- <?rfc include='reference.RFC.5905'?>
-
- <?rfc include='reference.RFC.4689'?>
-
- <?rfc include='reference.RFC.4737'?>
-
- <?rfc include='reference.RFC.5357'?>
-
- <?rfc include='reference.RFC.2889'?>
-
- <?rfc include='reference.RFC.3918'?>
-
- <?rfc include='reference.RFC.6201'?>
-
- <?rfc include='reference.RFC.2285'?>
-
- <reference anchor="NFV.PER001">
- <front>
- <title>Network Function Virtualization: Performance and Portability
- Best Practices</title>
-
- <author fullname="ETSI NFV" initials="" surname="">
- <organization/>
- </author>
-
- <date month="June" year="2014"/>
- </front>
-
- <seriesInfo name="Group Specification"
- value="ETSI GS NFV-PER 001 V1.1.1 (2014-06)"/>
-
- <format type="PDF"/>
- </reference>
- </references>
-
- <references title="Informative References">
- <?rfc include='reference.RFC.1242'?>
-
- <?rfc include='reference.RFC.5481'?>
-
- <?rfc include='reference.RFC.6049'?>
-
- <?rfc include='reference.RFC.6248'?>
-
- <?rfc include='reference.RFC.6390'?>
-
- <?rfc include='reference.I-D.ietf-bmwg-virtual-net'?>
-
- <?rfc include='reference.I-D.huang-bmwg-virtual-network-performance'?>
-
- <reference anchor="TestTopo">
- <front>
- <title>Test Topologies
- https://wiki.opnfv.org/vsperf/test_methodology</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="LTDoverV">
- <front>
- <title>LTD Test Spec Overview
- https://wiki.opnfv.org/wiki/vswitchperf_test_spec_review</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="LTD">
- <front>
- <title>LTD Test Specification
- http://artifacts.opnfv.org/vswitchperf/brahmaputra/docs/requirements/index.html</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="BrahRel">
- <front>
- <title>Brahmaputra, Second OPNFV Release
- https://www.opnfv.org/brahmaputra</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="IFA003">
- <front>
- <title>https://docbox.etsi.org/ISG/NFV/Open/Drafts/IFA003_Acceleration_-_vSwitch_Spec/</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
- </references>
- </back>
-</rfc>
diff --git a/docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-00.xml b/docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-00.xml
deleted file mode 100644
index b5f7f833..00000000
--- a/docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-00.xml
+++ /dev/null
@@ -1,964 +0,0 @@
-<?xml version="1.0" encoding="US-ASCII"?>
-<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
-<?rfc toc="yes"?>
-<?rfc tocompact="yes"?>
-<?rfc tocdepth="3"?>
-<?rfc tocindent="yes"?>
-<?rfc symrefs="yes"?>
-<?rfc sortrefs="yes"?>
-<?rfc comments="yes"?>
-<?rfc inline="yes"?>
-<?rfc compact="yes"?>
-<?rfc subcompact="no"?>
-<rfc category="info" docName="draft-vsperf-bmwg-vswitch-opnfv-01"
- ipr="trust200902">
- <front>
- <title abbrev="Benchmarking vSwitches">Benchmarking Virtual Switches in
- OPNFV</title>
-
- <author fullname="Maryam Tahhan" initials="M." surname="Tahhan">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>maryam.tahhan@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Billy O'Mahony" initials="B." surname="O'Mahony">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>billy.o.mahony@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Al Morton" initials="A." surname="Morton">
- <organization>AT&amp;T Labs</organization>
-
- <address>
- <postal>
- <street>200 Laurel Avenue South</street>
-
- <city>Middletown,</city>
-
- <region>NJ</region>
-
- <code>07748</code>
-
- <country>USA</country>
- </postal>
-
- <phone>+1 732 420 1571</phone>
-
- <facsimile>+1 732 368 1192</facsimile>
-
- <email>acmorton@att.com</email>
-
- <uri>http://home.comcast.net/~acmacm/</uri>
- </address>
- </author>
-
- <date day="14" month="October" year="2015"/>
-
- <abstract>
- <t>This memo describes the progress of the Open Platform for NFV (OPNFV)
- project on virtual switch performance "VSWITCHPERF". This project
- intends to build on the current and completed work of the Benchmarking
- Methodology Working Group in IETF, by referencing existing literature.
- The Benchmarking Methodology Working Group has traditionally conducted
- laboratory characterization of dedicated physical implementations of
- internetworking functions. Therefore, this memo begins to describe the
- additional considerations when virtual switches are implemented in
- general-purpose hardware. The expanded tests and benchmarks are also
- influenced by the OPNFV mission to support virtualization of the "telco"
- infrastructure.</t>
- </abstract>
-
- <note title="Requirements Language">
- <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
- "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
- document are to be interpreted as described in <xref
- target="RFC2119">RFC 2119</xref>.</t>
-
- <t/>
- </note>
- </front>
-
- <middle>
- <section title="Introduction">
- <t>Benchmarking Methodology Working Group (BMWG) has traditionally
- conducted laboratory characterization of dedicated physical
- implementations of internetworking functions. The Black-box Benchmarks
- of Throughput, Latency, Forwarding Rates and others have served our
- industry for many years. Now, Network Function Virtualization (NFV) has
- the goal to transform how internetwork functions are implemented, and
- therefore has garnered much attention.</t>
-
- <t>This memo describes the progress of the Open Platform for NFV (OPNFV)
- project on virtual switch performance characterization, "VSWITCHPERF".
- This project intends to build on the current and completed work of the
- Benchmarking Methodology Working Group in IETF, by referencing existing
- literature. For example, currently the most often referenced RFC is
- <xref target="RFC2544"/> (which depends on <xref target="RFC1242"/>) and
- foundation of the benchmarking work in OPNFV is common and strong.</t>
-
- <t>See
- https://wiki.opnfv.org/characterize_vswitch_performance_for_telco_nfv_use_cases
- for more background, and the OPNFV website for general information:
- https://www.opnfv.org/</t>
-
- <t>The authors note that OPNFV distinguishes itself from other open
- source compute and networking projects through its emphasis on existing
- "telco" services as opposed to cloud-computing. There are many ways in
- which telco requirements have different emphasis on performance
- dimensions when compared to cloud computing: support for and transfer of
- isochronous media streams is one example.</t>
-
- <t>Note also that the move to NFV Infrastructure has resulted in many
- new benchmarking initiatives across the industry, and the authors are
- currently doing their best to maintain alignment with many other
- projects, and this Internet Draft is evidence of the efforts.</t>
- </section>
-
- <section title="Scope">
- <t>The primary purpose and scope of the memo is to inform BMWG of
- work-in-progress that builds on the body of extensive literature and
- experience. Additionally, once the initial information conveyed here is
- received, this memo may be expanded to include more detail and
- commentary from both BMWG and OPNFV communities, under BMWG's chartered
- work to characterize the NFV Infrastructure (a virtual switch is an
- important aspect of that infrastructure).</t>
- </section>
-
- <section title="Benchmarking Considerations">
- <t>This section highlights some specific considerations (from <xref
- target="I-D.ietf-bmwg-virtual-net"/>)related to Benchmarks for virtual
- switches. The OPNFV project is sharing its present view on these areas,
- as they develop their specifications in the Level Test Design (LTD)
- document.</t>
-
- <section title="Comparison with Physical Network Functions">
- <t>To compare the performance of virtual designs and implementations
- with their physical counterparts, identical benchmarks are needed.
- BMWG has developed specifications for many network functions this memo
- re-uses existing benchmarks through references, and expands them
- during development of new methods. A key configuration aspect is the
- number of parallel cores required to achieve comparable performance
- with a given physical device, or whether some limit of scale was
- reached before the cores could achieve the comparable level.</t>
-
- <t>It's unlikely that the virtual switch will be the only application
- running on the SUT, so CPU utilization, Cache utilization, and Memory
- footprint should also be recorded for the virtual implementations of
- internetworking functions.</t>
- </section>
-
- <section title="Continued Emphasis on Black-Box Benchmarks">
- <t>External observations remain essential as the basis for Benchmarks.
- Internal observations with fixed specification and interpretation will
- be provided in parallel to assist the development of operations
- procedures when the technology is deployed.</t>
- </section>
-
- <section title="New Configuration Parameters">
- <t>A key consideration when conducting any sort of benchmark is trying
- to ensure the consistency and repeatability of test results. When
- benchmarking the performance of a vSwitch there are many factors that
- can affect the consistency of results, one key factor is matching the
- various hardware and software details of the SUT. This section lists
- some of the many new parameters which this project believes are
- critical to report in order to achieve repeatability.</t>
-
- <t>Hardware details including:</t>
-
- <t><list style="symbols">
- <t>Platform details</t>
-
- <t>Processor details</t>
-
- <t>Memory information (type and size)</t>
-
- <t>Number of enabled cores</t>
-
- <t>Number of cores used for the test</t>
-
- <t>Number of physical NICs, as well as their details
- (manufacturer, versions, type and the PCI slot they are plugged
- into)</t>
-
- <t>NIC interrupt configuration</t>
-
- <t>BIOS version, release date and any configurations that were
- modified</t>
-
- <t>CPU microcode level</t>
-
- <t>Memory DIMM configurations (quad rank performance may not be
- the same as dual rank) in size, freq and slot locations</t>
-
- <t>PCI configuration parameters (payload size, early ack
- option...)</t>
-
- <t>Power management at all levels (ACPI sleep states, processor
- package, OS...)</t>
- </list>Software details including:</t>
-
- <t><list style="symbols">
- <t>OS parameters and behavior (text vs graphical no one typing at
- the console on one system)</t>
-
- <t>OS version (for host and VNF)</t>
-
- <t>Kernel version (for host and VNF)</t>
-
- <t>GRUB boot parameters (for host and VNF)</t>
-
- <t>Hypervisor details (Type and version)</t>
-
- <t>Selected vSwitch, version number or commit id used</t>
-
- <t>vSwitch launch command line if it has been parameterised</t>
-
- <t>Memory allocation to the vSwitch</t>
-
- <t>which NUMA node it is using, and how many memory channels</t>
-
- <t>DPDK or any other SW dependency version number or commit id
- used</t>
-
- <t>Memory allocation to a VM - if it's from Hugpages/elsewhere</t>
-
- <t>VM storage type: snapshot/independent persistent/independent
- non-persistent</t>
-
- <t>Number of VMs</t>
-
- <t>Number of Virtual NICs (vNICs), versions, type and driver</t>
-
- <t>Number of virtual CPUs and their core affinity on the host</t>
-
- <t>Number vNIC interrupt configuration</t>
-
- <t>Thread affinitization for the applications (including the
- vSwitch itself) on the host</t>
-
- <t>Details of Resource isolation, such as CPUs designated for
- Host/Kernel (isolcpu) and CPUs designated for specific processes
- (taskset). - Test duration. - Number of flows.</t>
- </list></t>
-
- <t>Test Traffic Information:<list style="symbols">
- <t>Traffic type - UDP, TCP, IMIX / Other</t>
-
- <t>Packet Sizes</t>
-
- <t>Deployment Scenario</t>
- </list></t>
-
- <t/>
- </section>
-
- <section title="Flow classification">
- <t>Virtual switches group packets into flows by processing and
- matching particular packet or frame header information, or by matching
- packets based on the input ports. Thus a flow can be thought of a
- sequence of packets that have the same set of header field values or
- have arrived on the same port. Performance results can vary based on
- the parameters the vSwitch uses to match for a flow. The recommended
- flow classification parameters for any vSwitch performance tests are:
- the input port, the source IP address, the destination IP address and
- the Ethernet protocol type field. It is essential to increase the flow
- timeout time on a vSwitch before conducting any performance tests that
- do not measure the flow setup time. Normally the first packet of a
- particular stream will install the flow in the virtual switch which
- adds an additional latency, subsequent packets of the same flow are
- not subject to this latency if the flow is already installed on the
- vSwitch.</t>
- </section>
-
- <section title="Benchmarks using Baselines with Resource Isolation">
- <t>This outline describes measurement of baseline with isolated
- resources at a high level, which is the intended approach at this
- time.</t>
-
- <t><list style="numbers">
- <t>Baselines: <list style="symbols">
- <t>Optional: Benchmark platform forwarding capability without
- a vswitch or VNF for at least 72 hours (serves as a means of
- platform validation and a means to obtain the base performance
- for the platform in terms of its maximum forwarding rate and
- latency). <figure>
- <preamble>Benchmark platform forwarding
- capability</preamble>
-
- <artwork align="right"><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | Simple Forwarding App | | Host
- | | | | |
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmark VNF forwarding capability with direct
- connectivity (vSwitch bypass, e.g., SR/IOV) for at least 72
- hours (serves as a means of VNF validation and a means to
- obtain the base performance for the VNF in terms of its
- maximum forwarding rate and latency). The metrics gathered
- from this test will serve as a key comparison point for
- vSwitch bypass technologies performance and vSwitch
- performance. <figure align="right">
- <preamble>Benchmark VNF forwarding capability</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | VNF | | |
- | | | | |
- | +------------------------------------------+ | |
- | | Passthrough/SR-IOV | | Host
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmarking with isolated resources alone, with other
- resources (both HW&amp;SW) disabled Example, vSw and VM are
- SUT</t>
-
- <t>Benchmarking with isolated resources alone, leaving some
- resources unused</t>
-
- <t>Benchmark with isolated resources and all resources
- occupied</t>
- </list></t>
-
- <t>Next Steps<list style="symbols">
- <t>Limited sharing</t>
-
- <t>Production scenarios</t>
-
- <t>Stressful scenarios</t>
- </list></t>
- </list></t>
- </section>
- </section>
-
- <section title="VSWITCHPERF Specification Summary">
- <t>The overall specification in preparation is referred to as a Level
- Test Design (LTD) document, which will contain a suite of performance
- tests. The base performance tests in the LTD are based on the
- pre-existing specifications developed by BMWG to test the performance of
- physical switches. These specifications include:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2544"/> Benchmarking Methodology for Network
- Interconnect Devices</t>
-
- <t><xref target="RFC2889"/> Benchmarking Methodology for LAN
- Switching</t>
-
- <t><xref target="RFC6201"/> Device Reset Characterization</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t>Some of the above/newer RFCs are being applied in benchmarking for
- the first time, and represent a development challenge for test equipment
- developers. Fortunately, many members of the testing system community
- have engaged on the VSPERF project, including an open source test
- system.</t>
-
- <t>In addition to this, the LTD also re-uses the terminology defined
- by:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2285"/> Benchmarking Terminology for LAN
- Switching Devices</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t/>
-
- <t>Specifications to be included in future updates of the LTD
- include:<list style="symbols">
- <t><xref target="RFC3918"/> Methodology for IP Multicast
- Benchmarking</t>
-
- <t><xref target="RFC4737"/> Packet Reordering Metrics</t>
- </list></t>
-
- <t>As one might expect, the most fundamental internetworking
- characteristics of Throughput and Latency remain important when the
- switch is virtualized, and these benchmarks figure prominently in the
- specification.</t>
-
- <t>When considering characteristics important to "telco" network
- functions, we must begin to consider additional performance metrics. In
- this case, the project specifications have referenced metrics from the
- IETF IP Performance Metrics (IPPM) literature. This means that the <xref
- target="RFC2544"/> test of Latency is replaced by measurement of a
- metric derived from IPPM's <xref target="RFC2679"/>, where a set of
- statistical summaries will be provided (mean, max, min, etc.). Further
- metrics planned to be benchmarked include packet delay variation as
- defined by <xref target="RFC5481"/> , reordering, burst behaviour, DUT
- availability, DUT capacity and packet loss in long term testing at
- Throughput level, where some low-level of background loss may be present
- and characterized.</t>
-
- <t>Tests have been (or will be) designed to collect the metrics
- below:</t>
-
- <t><list style="symbols">
- <t>Throughput Tests to measure the maximum forwarding rate (in
- frames per second or fps) and bit rate (in Mbps) for a constant load
- (as defined by RFC1242) without traffic loss.</t>
-
- <t>Packet and Frame Delay Distribution Tests to measure average, min
- and max packet and frame delay for constant loads.</t>
-
- <t>Packet Delay Tests to understand latency distribution for
- different packet sizes and over an extended test run to uncover
- outliers.</t>
-
- <t>Scalability Tests to understand how the virtual switch performs
- as the number of flows, active ports, complexity of the forwarding
- logic&rsquo;s configuration&hellip; it has to deal with
- increases.</t>
-
- <t>Stream Performance Tests (TCP, UDP) to measure bulk data transfer
- performance, i.e. how fast systems can send and receive data through
- the switch.</t>
-
- <t>Control Path and Datapath Coupling Tests, to understand how
- closely coupled the datapath and the control path are as well as the
- effect of this coupling on the performance of the DUT (example:
- delay of the initial packet of a flow).</t>
-
- <t>CPU and Memory Consumption Tests to understand the virtual
- switch&rsquo;s footprint on the system, usually conducted as
- auxiliary measurements with benchmarks above. They include: CPU
- utilization, Cache utilization and Memory footprint.</t>
- </list></t>
-
- <t>Future/planned test specs include:<list style="symbols">
- <t>Request/Response Performance Tests (TCP, UDP) which measure the
- transaction rate through the switch.</t>
-
- <t>Noisy Neighbour Tests, to understand the effects of resource
- sharing on the performance of a virtual switch.</t>
-
- <t>Tests derived from examination of ETSI NFV Draft GS IFA003
- requirements <xref target="IFA003"/> on characterization of
- acceleration technologies applied to vswitches.</t>
- </list>The flexibility of deployment of a virtual switch within a
- network means that the BMWG IETF existing literature needs to be used to
- characterize the performance of a switch in various deployment
- scenarios. The deployment scenarios under consideration include:</t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to physical
- port</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +--------------------+ | |
- | | | | |
- | | v | | Host
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure></t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ : | |
- | | | | | Guest
- | : v | |
- | +---------------+ +---------------+ | |
- | | logical port 0| | logical port 1| | |
- +---+---------------+-----------+---------------+---+ __|
- ^ :
- | |
- : v __
- +---+---------------+----------+---------------+---+ |
- | | logical port 0| | logical port 1| | |
- | +---------------+ +---------------+ | |
- | ^ : | |
- | | | | | Host
- | : v | |
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | |
- | | v | | | v | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 1 | | | | 0 1 | | |
- +---+---------------+--+ +---+---------------+--+__|
- ^ : ^ :
- | | | |
- : v : v _
- +---+---------------+---------+---------------+--+ |
- | | 0 1 | | 3 4 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | ^ | ^ | | | Host
- | | |-----------------| v | |
- | +--------------+ +--------------+ | |
- | | phy ports | vSwitch | phy ports | | |
- +---+--------------+----------+--------------+---+_|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ | |
- | | | | Guest
- | : | |
- | +---------------+ | |
- | | logical port 0| | |
- +---+---------------+-------------------------------+ __|
- ^
- |
- : __
- +---+---------------+------------------------------+ |
- | | logical port 0| | |
- | +---------------+ | |
- | ^ | |
- | | | | Host
- | : | |
- | +--------------+ | |
- | | phy port | vSwitch | |
- +---+--------------+------------ -------------- ---+ __|
- ^
- |
- :
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | : | |
- | | | | Guest
- | v | |
- | +---------------+ | |
- | | logical port | | |
- +-------------------------------+---------------+---+ __|
- :
- |
- v __
- +------------------------------+---------------+---+ |
- | | logical port | | |
- | +---------------+ | |
- | : | |
- | | | | Host
- | v | |
- | +--------------+ | |
- | vSwitch | phy port | | |
- +-------------------------------+--------------+---+ __|
- :
- |
- v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | | | | ^ | |
- | v | | | | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 | | | | 0 | | |
- +---+---------------+--+ +---+---------------+--+__|
- : ^
- | |
- v : _
- +---+---------------+---------+---------------+--+ |
- | | 1 | | 1 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | | ^ | | Host
- | L-----------------+ | |
- | | |
- | vSwitch | |
- +------------------------------------------------+_|]]></artwork>
- </figure></t>
-
- <t>A set of Deployment Scenario figures is available on the VSPERF Test
- Methodology Wiki page <xref target="TestTopo"/>. </t>
- </section>
-
- <section title="3x3 Matrix Coverage">
- <t>This section organizes the many existing test specifications into the
- "3x3" matrix (introduced in <xref target="I-D.ietf-bmwg-virtual-net"/>).
- Because the LTD specification ID names are quite long, this section is
- organized into lists for each occupied cell of the matrix (not all are
- occupied, also the matrix has grown to 3x4 to accommodate scale metrics
- when displaying the coverage of many metrics/benchmarks).</t>
-
- <t>The tests listed below assess the activation of paths in the data
- plane, rather than the control plane.</t>
-
- <t>A complete list of tests with short summaries is available on the
- VSPERF "LTD Test Spec Overview" Wiki page <xref target="LTDoverV"/>.</t>
-
- <section title="Speed of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressLearningRate</t>
-
- <t>PacketLatency.InitialPacketProcessingLatency</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Activation section">
- <t><list style="symbols">
- <t>CPDP.Coupling.Flow.Addition</t>
- </list></t>
- </section>
-
- <section title="Reliability of Activation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.SystemRecoveryTime</t>
-
- <t>Throughput.RFC2544.ResetTime</t>
- </list></t>
- </section>
-
- <section title="Scale of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressCachingCapacity</t>
- </list></t>
- </section>
-
- <section title="Speed of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.PacketLossRate</t>
-
- <t>CPU.RFC2544.0PacketLoss</t>
-
- <t>Throughput.RFC2544.PacketLossRateFrameModification</t>
-
- <t>Throughput.RFC2544.BackToBackFrames</t>
-
- <t>Throughput.RFC2889.MaxForwardingRate</t>
-
- <t>Throughput.RFC2889.ForwardPressure</t>
-
- <t>Throughput.RFC2889.BroadcastFrameForwarding</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.ErrorFramesFiltering</t>
-
- <t>Throughput.RFC2544.Profile</t>
- </list></t>
- </section>
-
- <section title="Reliability of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.Soak</t>
-
- <t>Throughput.RFC2889.SoakFrameModification</t>
-
- <t>PacketDelayVariation.RFC3393.Soak</t>
- </list></t>
- </section>
-
- <section title="Scalability of Operation">
- <t><list style="symbols">
- <t>Scalability.RFC2544.0PacketLoss</t>
-
- <t>MemoryBandwidth.RFC2544.0PacketLoss.Scalability</t>
- </list></t>
- </section>
-
- <section title="Summary">
- <t><figure>
- <artwork><![CDATA[|------------------------------------------------------------------------|
-| | | | | |
-| | SPEED | ACCURACY | RELIABILITY | SCALE |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Activation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Operation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| De-activation | | | | |
-| | | | | |
-|------------------------------------------------------------------------|]]></artwork>
- </figure></t>
- </section>
- </section>
-
- <section title="Security Considerations">
- <t>Benchmarking activities as described in this memo are limited to
- technology characterization of a Device Under Test/System Under Test
- (DUT/SUT) using controlled stimuli in a laboratory environment, with
- dedicated address space and the constraints specified in the sections
- above.</t>
-
- <t>The benchmarking network topology will be an independent test setup
- and MUST NOT be connected to devices that may forward the test traffic
- into a production network, or misroute traffic to the test management
- network.</t>
-
- <t>Further, benchmarking is performed on a "black-box" basis, relying
- solely on measurements observable external to the DUT/SUT.</t>
-
- <t>Special capabilities SHOULD NOT exist in the DUT/SUT specifically for
- benchmarking purposes. Any implications for network security arising
- from the DUT/SUT SHOULD be identical in the lab and in production
- networks.</t>
- </section>
-
- <section anchor="IANA" title="IANA Considerations">
- <t>No IANA Action is requested at this time.</t>
- </section>
-
- <section title="Acknowledgements">
- <t>The authors acknowledge</t>
- </section>
- </middle>
-
- <back>
- <references title="Normative References">
- <?rfc ?>
-
- <?rfc include="reference.RFC.2119"?>
-
- <?rfc include="reference.RFC.2330"?>
-
- <?rfc include='reference.RFC.2544'?>
-
- <?rfc include="reference.RFC.2679"?>
-
- <?rfc include='reference.RFC.2680'?>
-
- <?rfc include='reference.RFC.3393'?>
-
- <?rfc include='reference.RFC.3432'?>
-
- <?rfc include='reference.RFC.2681'?>
-
- <?rfc include='reference.RFC.5905'?>
-
- <?rfc include='reference.RFC.4689'?>
-
- <?rfc include='reference.RFC.4737'?>
-
- <?rfc include='reference.RFC.5357'?>
-
- <?rfc include='reference.RFC.2889'?>
-
- <?rfc include='reference.RFC.3918'?>
-
- <?rfc include='reference.RFC.6201'?>
-
- <?rfc include='reference.RFC.2285'?>
-
- <reference anchor="NFV.PER001">
- <front>
- <title>Network Function Virtualization: Performance and Portability
- Best Practices</title>
-
- <author fullname="ETSI NFV" initials="" surname="">
- <organization/>
- </author>
-
- <date month="June" year="2014"/>
- </front>
-
- <seriesInfo name="Group Specification"
- value="ETSI GS NFV-PER 001 V1.1.1 (2014-06)"/>
-
- <format type="PDF"/>
- </reference>
- </references>
-
- <references title="Informative References">
- <?rfc include='reference.RFC.1242'?>
-
- <?rfc include='reference.RFC.5481'?>
-
- <?rfc include='reference.RFC.6049'?>
-
- <?rfc include='reference.RFC.6248'?>
-
- <?rfc include='reference.RFC.6390'?>
-
- <?rfc include='reference.I-D.ietf-bmwg-virtual-net'?>
-
- <reference anchor="TestTopo">
- <front>
- <title>Test Topologies
- https://wiki.opnfv.org/vsperf/test_methodology</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="LTDoverV">
- <front>
- <title>LTD Test Spec Overview
- https://wiki.opnfv.org/wiki/vswitchperf_test_spec_review </title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="IFA003">
- <front>
- <title>https://docbox.etsi.org/ISG/NFV/Open/Drafts/IFA003_Acceleration_-_vSwitch_Spec/</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
- </references>
- </back>
-</rfc>
diff --git a/docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-01.xml b/docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-01.xml
deleted file mode 100644
index a9405a77..00000000
--- a/docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-01.xml
+++ /dev/null
@@ -1,1016 +0,0 @@
-<?xml version="1.0" encoding="US-ASCII"?>
-<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
-<?rfc toc="yes"?>
-<?rfc tocompact="yes"?>
-<?rfc tocdepth="3"?>
-<?rfc tocindent="yes"?>
-<?rfc symrefs="yes"?>
-<?rfc sortrefs="yes"?>
-<?rfc comments="yes"?>
-<?rfc inline="yes"?>
-<?rfc compact="yes"?>
-<?rfc subcompact="no"?>
-<rfc category="info" docName="draft-vsperf-bmwg-vswitch-opnfv-02"
- ipr="trust200902">
- <front>
- <title abbrev="Benchmarking vSwitches">Benchmarking Virtual Switches in
- OPNFV</title>
-
- <author fullname="Maryam Tahhan" initials="M." surname="Tahhan">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>maryam.tahhan@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Billy O'Mahony" initials="B." surname="O'Mahony">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>billy.o.mahony@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Al Morton" initials="A." surname="Morton">
- <organization>AT&amp;T Labs</organization>
-
- <address>
- <postal>
- <street>200 Laurel Avenue South</street>
-
- <city>Middletown,</city>
-
- <region>NJ</region>
-
- <code>07748</code>
-
- <country>USA</country>
- </postal>
-
- <phone>+1 732 420 1571</phone>
-
- <facsimile>+1 732 368 1192</facsimile>
-
- <email>acmorton@att.com</email>
-
- <uri>http://home.comcast.net/~acmacm/</uri>
- </address>
- </author>
-
- <date day="20" month="March" year="2016"/>
-
- <abstract>
- <t>This memo describes the progress of the Open Platform for NFV (OPNFV)
- project on virtual switch performance "VSWITCHPERF". This project
- intends to build on the current and completed work of the Benchmarking
- Methodology Working Group in IETF, by referencing existing literature.
- The Benchmarking Methodology Working Group has traditionally conducted
- laboratory characterization of dedicated physical implementations of
- internetworking functions. Therefore, this memo begins to describe the
- additional considerations when virtual switches are implemented in
- general-purpose hardware. The expanded tests and benchmarks are also
- influenced by the OPNFV mission to support virtualization of the "telco"
- infrastructure.</t>
- </abstract>
-
- <note title="Requirements Language">
- <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
- "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
- document are to be interpreted as described in <xref
- target="RFC2119">RFC 2119</xref>.</t>
-
- <t/>
- </note>
- </front>
-
- <middle>
- <section title="Introduction">
- <t>Benchmarking Methodology Working Group (BMWG) has traditionally
- conducted laboratory characterization of dedicated physical
- implementations of internetworking functions. The Black-box Benchmarks
- of Throughput, Latency, Forwarding Rates and others have served our
- industry for many years. Now, Network Function Virtualization (NFV) has
- the goal to transform how internetwork functions are implemented, and
- therefore has garnered much attention.</t>
-
- <t>This memo summarizes the progress of the Open Platform for NFV
- (OPNFV) project on virtual switch performance characterization,
- "VSWITCHPERF", through the Brahmaputra (second) release <xref
- target="BrahRel"/>. This project intends to build on the current and
- completed work of the Benchmarking Methodology Working Group in IETF, by
- referencing existing literature. For example, currently the most often
- referenced RFC is <xref target="RFC2544"/> (which depends on <xref
- target="RFC1242"/>) and foundation of the benchmarking work in OPNFV is
- common and strong.</t>
-
- <t>See
- https://wiki.opnfv.org/characterize_vswitch_performance_for_telco_nfv_use_cases
- for more background, and the OPNFV website for general information:
- https://www.opnfv.org/</t>
-
- <t>The authors note that OPNFV distinguishes itself from other open
- source compute and networking projects through its emphasis on existing
- "telco" services as opposed to cloud-computing. There are many ways in
- which telco requirements have different emphasis on performance
- dimensions when compared to cloud computing: support for and transfer of
- isochronous media streams is one example.</t>
-
- <t>Note also that the move to NFV Infrastructure has resulted in many
- new benchmarking initiatives across the industry. The authors are
- currently doing their best to maintain alignment with many other
- projects, and this Internet Draft is one part of the efforts. We
- acknowledge the early work in <xref
- target="I-D.huang-bmwg-virtual-network-performance"/>, and useful
- discussion with the authors.</t>
- </section>
-
- <section title="Scope">
- <t>The primary purpose and scope of the memo is to inform the industry
- of work-in-progress that builds on the body of extensive BMWG literature
- and experience, and describe the extensions needed for benchmarking
- virtual switches. Inital feedback indicates that many of these
- extensions may be applicable beyond the current scope (to hardware
- switches in the NFV Infrastructure and to virtual routers, for example).
- Additionally, this memo serves as a vehicle to include more detail and
- commentary from BMWG and other Open Source communities, under BMWG's
- chartered work to characterize the NFV Infrastructure (a virtual switch
- is an important aspect of that infrastructure).</t>
- </section>
-
- <section title="Benchmarking Considerations">
- <t>This section highlights some specific considerations (from <xref
- target="I-D.ietf-bmwg-virtual-net"/>)related to Benchmarks for virtual
- switches. The OPNFV project is sharing its present view on these areas,
- as they develop their specifications in the Level Test Design (LTD)
- document.</t>
-
- <section title="Comparison with Physical Network Functions">
- <t>To compare the performance of virtual designs and implementations
- with their physical counterparts, identical benchmarks are needed.
- BMWG has developed specifications for many network functions this memo
- re-uses existing benchmarks through references, and expands them
- during development of new methods. A key configuration aspect is the
- number of parallel cores required to achieve comparable performance
- with a given physical device, or whether some limit of scale was
- reached before the cores could achieve the comparable level.</t>
-
- <t>It's unlikely that the virtual switch will be the only application
- running on the SUT, so CPU utilization, Cache utilization, and Memory
- footprint should also be recorded for the virtual implementations of
- internetworking functions.</t>
- </section>
-
- <section title="Continued Emphasis on Black-Box Benchmarks">
- <t>External observations remain essential as the basis for Benchmarks.
- Internal observations with fixed specification and interpretation will
- be provided in parallel to assist the development of operations
- procedures when the technology is deployed.</t>
- </section>
-
- <section title="New Configuration Parameters">
- <t>A key consideration when conducting any sort of benchmark is trying
- to ensure the consistency and repeatability of test results. When
- benchmarking the performance of a vSwitch there are many factors that
- can affect the consistency of results, one key factor is matching the
- various hardware and software details of the SUT. This section lists
- some of the many new parameters which this project believes are
- critical to report in order to achieve repeatability.</t>
-
- <t>Hardware details including:</t>
-
- <t><list style="symbols">
- <t>Platform details</t>
-
- <t>Processor details</t>
-
- <t>Memory information (type and size)</t>
-
- <t>Number of enabled cores</t>
-
- <t>Number of cores used for the test</t>
-
- <t>Number of physical NICs, as well as their details
- (manufacturer, versions, type and the PCI slot they are plugged
- into)</t>
-
- <t>NIC interrupt configuration</t>
-
- <t>BIOS version, release date and any configurations that were
- modified</t>
-
- <t>CPU microcode level</t>
-
- <t>Memory DIMM configurations (quad rank performance may not be
- the same as dual rank) in size, freq and slot locations</t>
-
- <t>PCI configuration parameters (payload size, early ack
- option...)</t>
-
- <t>Power management at all levels (ACPI sleep states, processor
- package, OS...)</t>
- </list>Software details including:</t>
-
- <t><list style="symbols">
- <t>OS parameters and behavior (text vs graphical no one typing at
- the console on one system)</t>
-
- <t>OS version (for host and VNF)</t>
-
- <t>Kernel version (for host and VNF)</t>
-
- <t>GRUB boot parameters (for host and VNF)</t>
-
- <t>Hypervisor details (Type and version)</t>
-
- <t>Selected vSwitch, version number or commit id used</t>
-
- <t>vSwitch launch command line if it has been parameterised</t>
-
- <t>Memory allocation to the vSwitch</t>
-
- <t>which NUMA node it is using, and how many memory channels</t>
-
- <t>DPDK or any other SW dependency version number or commit id
- used</t>
-
- <t>Memory allocation to a VM - if it's from Hugpages/elsewhere</t>
-
- <t>VM storage type: snapshot/independent persistent/independent
- non-persistent</t>
-
- <t>Number of VMs</t>
-
- <t>Number of Virtual NICs (vNICs), versions, type and driver</t>
-
- <t>Number of virtual CPUs and their core affinity on the host</t>
-
- <t>Number vNIC interrupt configuration</t>
-
- <t>Thread affinitization for the applications (including the
- vSwitch itself) on the host</t>
-
- <t>Details of Resource isolation, such as CPUs designated for
- Host/Kernel (isolcpu) and CPUs designated for specific processes
- (taskset). - Test duration. - Number of flows.</t>
- </list></t>
-
- <t>Test Traffic Information:<list style="symbols">
- <t>Traffic type - UDP, TCP, IMIX / Other</t>
-
- <t>Packet Sizes</t>
-
- <t>Deployment Scenario</t>
- </list></t>
-
- <t/>
- </section>
-
- <section title="Flow classification">
- <t>Virtual switches group packets into flows by processing and
- matching particular packet or frame header information, or by matching
- packets based on the input ports. Thus a flow can be thought of a
- sequence of packets that have the same set of header field values or
- have arrived on the same port. Performance results can vary based on
- the parameters the vSwitch uses to match for a flow. The recommended
- flow classification parameters for any vSwitch performance tests are:
- the input port, the source IP address, the destination IP address and
- the Ethernet protocol type field. It is essential to increase the flow
- timeout time on a vSwitch before conducting any performance tests that
- do not measure the flow setup time. Normally the first packet of a
- particular stream will install the flow in the virtual switch which
- adds an additional latency, subsequent packets of the same flow are
- not subject to this latency if the flow is already installed on the
- vSwitch.</t>
- </section>
-
- <section title="Benchmarks using Baselines with Resource Isolation">
- <t>This outline describes measurement of baseline with isolated
- resources at a high level, which is the intended approach at this
- time.</t>
-
- <t><list style="numbers">
- <t>Baselines: <list style="symbols">
- <t>Optional: Benchmark platform forwarding capability without
- a vswitch or VNF for at least 72 hours (serves as a means of
- platform validation and a means to obtain the base performance
- for the platform in terms of its maximum forwarding rate and
- latency). <figure>
- <preamble>Benchmark platform forwarding
- capability</preamble>
-
- <artwork align="right"><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | Simple Forwarding App | | Host
- | | | | |
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmark VNF forwarding capability with direct
- connectivity (vSwitch bypass, e.g., SR/IOV) for at least 72
- hours (serves as a means of VNF validation and a means to
- obtain the base performance for the VNF in terms of its
- maximum forwarding rate and latency). The metrics gathered
- from this test will serve as a key comparison point for
- vSwitch bypass technologies performance and vSwitch
- performance. <figure align="right">
- <preamble>Benchmark VNF forwarding capability</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | VNF | | |
- | | | | |
- | +------------------------------------------+ | |
- | | Passthrough/SR-IOV | | Host
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmarking with isolated resources alone, with other
- resources (both HW&amp;SW) disabled Example, vSw and VM are
- SUT</t>
-
- <t>Benchmarking with isolated resources alone, leaving some
- resources unused</t>
-
- <t>Benchmark with isolated resources and all resources
- occupied</t>
- </list></t>
-
- <t>Next Steps<list style="symbols">
- <t>Limited sharing</t>
-
- <t>Production scenarios</t>
-
- <t>Stressful scenarios</t>
- </list></t>
- </list></t>
- </section>
- </section>
-
- <section title="VSWITCHPERF Specification Summary">
- <t>The overall specification in preparation is referred to as a Level
- Test Design (LTD) document, which will contain a suite of performance
- tests. The base performance tests in the LTD are based on the
- pre-existing specifications developed by BMWG to test the performance of
- physical switches. These specifications include:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2544"/> Benchmarking Methodology for Network
- Interconnect Devices</t>
-
- <t><xref target="RFC2889"/> Benchmarking Methodology for LAN
- Switching</t>
-
- <t><xref target="RFC6201"/> Device Reset Characterization</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t>Some of the above/newer RFCs are being applied in benchmarking for
- the first time, and represent a development challenge for test equipment
- developers. Fortunately, many members of the testing system community
- have engaged on the VSPERF project, including an open source test
- system.</t>
-
- <t>In addition to this, the LTD also re-uses the terminology defined
- by:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2285"/> Benchmarking Terminology for LAN
- Switching Devices</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t/>
-
- <t>Specifications to be included in future updates of the LTD
- include:<list style="symbols">
- <t><xref target="RFC3918"/> Methodology for IP Multicast
- Benchmarking</t>
-
- <t><xref target="RFC4737"/> Packet Reordering Metrics</t>
- </list></t>
-
- <t>As one might expect, the most fundamental internetworking
- characteristics of Throughput and Latency remain important when the
- switch is virtualized, and these benchmarks figure prominently in the
- specification.</t>
-
- <t>When considering characteristics important to "telco" network
- functions, we must begin to consider additional performance metrics. In
- this case, the project specifications have referenced metrics from the
- IETF IP Performance Metrics (IPPM) literature. This means that the <xref
- target="RFC2544"/> test of Latency is replaced by measurement of a
- metric derived from IPPM's <xref target="RFC2679"/>, where a set of
- statistical summaries will be provided (mean, max, min, etc.). Further
- metrics planned to be benchmarked include packet delay variation as
- defined by <xref target="RFC5481"/> , reordering, burst behaviour, DUT
- availability, DUT capacity and packet loss in long term testing at
- Throughput level, where some low-level of background loss may be present
- and characterized.</t>
-
- <t>Tests have been (or will be) designed to collect the metrics
- below:</t>
-
- <t><list style="symbols">
- <t>Throughput Tests to measure the maximum forwarding rate (in
- frames per second or fps) and bit rate (in Mbps) for a constant load
- (as defined by <xref target="RFC1242"/>) without traffic loss.</t>
-
- <t>Packet and Frame Delay Distribution Tests to measure average, min
- and max packet and frame delay for constant loads.</t>
-
- <t>Packet Delay Tests to understand latency distribution for
- different packet sizes and over an extended test run to uncover
- outliers.</t>
-
- <t>Scalability Tests to understand how the virtual switch performs
- as the number of flows, active ports, complexity of the forwarding
- logic&rsquo;s configuration&hellip; it has to deal with
- increases.</t>
-
- <t>Stream Performance Tests (TCP, UDP) to measure bulk data transfer
- performance, i.e. how fast systems can send and receive data through
- the switch.</t>
-
- <t>Control Path and Datapath Coupling Tests, to understand how
- closely coupled the datapath and the control path are as well as the
- effect of this coupling on the performance of the DUT (example:
- delay of the initial packet of a flow).</t>
-
- <t>CPU and Memory Consumption Tests to understand the virtual
- switch&rsquo;s footprint on the system, usually conducted as
- auxiliary measurements with benchmarks above. They include: CPU
- utilization, Cache utilization and Memory footprint.</t>
-
- <t>The so-called "Soak" tests, where the selected test is conducted
- over a long period of time (with an ideal duration of 24 hours, and
- at least 6 hours). The purpose of soak tests is to capture transient
- changes in performance which may occur due to infrequent processes
- or the low probability coincidence of two or more processes. The
- performance must be evaluated periodically during continuous
- testing, and this results in use of <xref target="RFC2889"/> Frame
- Rate metrics instead of <xref target="RFC2544"/> Throughput (which
- requires stopping traffic to allow time for all traffic to exit
- internal queues).</t>
- </list></t>
-
- <t>Future/planned test specs include:<list style="symbols">
- <t>Request/Response Performance Tests (TCP, UDP) which measure the
- transaction rate through the switch.</t>
-
- <t>Noisy Neighbour Tests, to understand the effects of resource
- sharing on the performance of a virtual switch.</t>
-
- <t>Tests derived from examination of ETSI NFV Draft GS IFA003
- requirements <xref target="IFA003"/> on characterization of
- acceleration technologies applied to vswitches.</t>
- </list>The flexibility of deployment of a virtual switch within a
- network means that the BMWG IETF existing literature needs to be used to
- characterize the performance of a switch in various deployment
- scenarios. The deployment scenarios under consideration include:</t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to physical
- port</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +--------------------+ | |
- | | | | |
- | | v | | Host
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure></t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ : | |
- | | | | | Guest
- | : v | |
- | +---------------+ +---------------+ | |
- | | logical port 0| | logical port 1| | |
- +---+---------------+-----------+---------------+---+ __|
- ^ :
- | |
- : v __
- +---+---------------+----------+---------------+---+ |
- | | logical port 0| | logical port 1| | |
- | +---------------+ +---------------+ | |
- | ^ : | |
- | | | | | Host
- | : v | |
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | |
- | | v | | | v | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 1 | | | | 0 1 | | |
- +---+---------------+--+ +---+---------------+--+__|
- ^ : ^ :
- | | | |
- : v : v _
- +---+---------------+---------+---------------+--+ |
- | | 0 1 | | 3 4 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | ^ | ^ | | | Host
- | | |-----------------| v | |
- | +--------------+ +--------------+ | |
- | | phy ports | vSwitch | phy ports | | |
- +---+--------------+----------+--------------+---+_|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ | |
- | | | | Guest
- | : | |
- | +---------------+ | |
- | | logical port 0| | |
- +---+---------------+-------------------------------+ __|
- ^
- |
- : __
- +---+---------------+------------------------------+ |
- | | logical port 0| | |
- | +---------------+ | |
- | ^ | |
- | | | | Host
- | : | |
- | +--------------+ | |
- | | phy port | vSwitch | |
- +---+--------------+------------ -------------- ---+ __|
- ^
- |
- :
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | : | |
- | | | | Guest
- | v | |
- | +---------------+ | |
- | | logical port | | |
- +-------------------------------+---------------+---+ __|
- :
- |
- v __
- +------------------------------+---------------+---+ |
- | | logical port | | |
- | +---------------+ | |
- | : | |
- | | | | Host
- | v | |
- | +--------------+ | |
- | vSwitch | phy port | | |
- +-------------------------------+--------------+---+ __|
- :
- |
- v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | | | | ^ | |
- | v | | | | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 | | | | 0 | | |
- +---+---------------+--+ +---+---------------+--+__|
- : ^
- | |
- v : _
- +---+---------------+---------+---------------+--+ |
- | | 1 | | 1 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | | ^ | | Host
- | L-----------------+ | |
- | | |
- | vSwitch | |
- +------------------------------------------------+_|]]></artwork>
- </figure></t>
-
- <t>A set of Deployment Scenario figures is available on the VSPERF Test
- Methodology Wiki page <xref target="TestTopo"/>.</t>
- </section>
-
- <section title="3x3 Matrix Coverage">
- <t>This section organizes the many existing test specifications into the
- "3x3" matrix (introduced in <xref target="I-D.ietf-bmwg-virtual-net"/>).
- Because the LTD specification ID names are quite long, this section is
- organized into lists for each occupied cell of the matrix (not all are
- occupied, also the matrix has grown to 3x4 to accommodate scale metrics
- when displaying the coverage of many metrics/benchmarks). The current
- version of the LTD specification is available <xref target="LTD"/>.</t>
-
- <t>The tests listed below assess the activation of paths in the data
- plane, rather than the control plane.</t>
-
- <t>A complete list of tests with short summaries is available on the
- VSPERF "LTD Test Spec Overview" Wiki page <xref target="LTDoverV"/>.</t>
-
- <section title="Speed of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressLearningRate</t>
-
- <t>PacketLatency.InitialPacketProcessingLatency</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Activation section">
- <t><list style="symbols">
- <t>CPDP.Coupling.Flow.Addition</t>
- </list></t>
- </section>
-
- <section title="Reliability of Activation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.SystemRecoveryTime</t>
-
- <t>Throughput.RFC2544.ResetTime</t>
- </list></t>
- </section>
-
- <section title="Scale of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressCachingCapacity</t>
- </list></t>
- </section>
-
- <section title="Speed of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.PacketLossRate</t>
-
- <t>CPU.RFC2544.0PacketLoss</t>
-
- <t>Throughput.RFC2544.PacketLossRateFrameModification</t>
-
- <t>Throughput.RFC2544.BackToBackFrames</t>
-
- <t>Throughput.RFC2889.MaxForwardingRate</t>
-
- <t>Throughput.RFC2889.ForwardPressure</t>
-
- <t>Throughput.RFC2889.BroadcastFrameForwarding</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.ErrorFramesFiltering</t>
-
- <t>Throughput.RFC2544.Profile</t>
- </list></t>
- </section>
-
- <section title="Reliability of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.Soak</t>
-
- <t>Throughput.RFC2889.SoakFrameModification</t>
-
- <t>PacketDelayVariation.RFC3393.Soak</t>
- </list></t>
- </section>
-
- <section title="Scalability of Operation">
- <t><list style="symbols">
- <t>Scalability.RFC2544.0PacketLoss</t>
-
- <t>MemoryBandwidth.RFC2544.0PacketLoss.Scalability</t>
- </list></t>
- </section>
-
- <section title="Summary">
- <t><figure>
- <artwork><![CDATA[|------------------------------------------------------------------------|
-| | | | | |
-| | SPEED | ACCURACY | RELIABILITY | SCALE |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Activation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Operation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| De-activation | | | | |
-| | | | | |
-|------------------------------------------------------------------------|]]></artwork>
- </figure></t>
- </section>
- </section>
-
- <section title="Security Considerations">
- <t>Benchmarking activities as described in this memo are limited to
- technology characterization of a Device Under Test/System Under Test
- (DUT/SUT) using controlled stimuli in a laboratory environment, with
- dedicated address space and the constraints specified in the sections
- above.</t>
-
- <t>The benchmarking network topology will be an independent test setup
- and MUST NOT be connected to devices that may forward the test traffic
- into a production network, or misroute traffic to the test management
- network.</t>
-
- <t>Further, benchmarking is performed on a "black-box" basis, relying
- solely on measurements observable external to the DUT/SUT.</t>
-
- <t>Special capabilities SHOULD NOT exist in the DUT/SUT specifically for
- benchmarking purposes. Any implications for network security arising
- from the DUT/SUT SHOULD be identical in the lab and in production
- networks.</t>
- </section>
-
- <section anchor="IANA" title="IANA Considerations">
- <t>No IANA Action is requested at this time.</t>
- </section>
-
- <section title="Acknowledgements">
- <t>The authors appreciate and acknowledge comments from Scott Bradner,
- Marius Georgescu, Ramki Krishnan, and Doug Montgomery, and others for
- their reviews.</t>
- </section>
- </middle>
-
- <back>
- <references title="Normative References">
- <?rfc ?>
-
- <?rfc include="reference.RFC.2119"?>
-
- <?rfc ?>
-
- <?rfc include="reference.RFC.2330"?>
-
- <?rfc include='reference.RFC.2544'?>
-
- <?rfc include="reference.RFC.2679"?>
-
- <?rfc include='reference.RFC.2680'?>
-
- <?rfc include='reference.RFC.3393'?>
-
- <?rfc include='reference.RFC.3432'?>
-
- <?rfc include='reference.RFC.2681'?>
-
- <?rfc include='reference.RFC.5905'?>
-
- <?rfc include='reference.RFC.4689'?>
-
- <?rfc include='reference.RFC.4737'?>
-
- <?rfc include='reference.RFC.5357'?>
-
- <?rfc include='reference.RFC.2889'?>
-
- <?rfc include='reference.RFC.3918'?>
-
- <?rfc include='reference.RFC.6201'?>
-
- <?rfc include='reference.RFC.2285'?>
-
- <reference anchor="NFV.PER001">
- <front>
- <title>Network Function Virtualization: Performance and Portability
- Best Practices</title>
-
- <author fullname="ETSI NFV" initials="" surname="">
- <organization/>
- </author>
-
- <date month="June" year="2014"/>
- </front>
-
- <seriesInfo name="Group Specification"
- value="ETSI GS NFV-PER 001 V1.1.1 (2014-06)"/>
-
- <format type="PDF"/>
- </reference>
- </references>
-
- <references title="Informative References">
- <?rfc include='reference.RFC.1242'?>
-
- <?rfc include='reference.RFC.5481'?>
-
- <?rfc include='reference.RFC.6049'?>
-
- <?rfc include='reference.RFC.6248'?>
-
- <?rfc include='reference.RFC.6390'?>
-
- <?rfc include='reference.I-D.ietf-bmwg-virtual-net'?>
-
- <?rfc include='reference.I-D.huang-bmwg-virtual-network-performance'?>
-
- <reference anchor="TestTopo">
- <front>
- <title>Test Topologies
- https://wiki.opnfv.org/vsperf/test_methodology</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="LTDoverV">
- <front>
- <title>LTD Test Spec Overview
- https://wiki.opnfv.org/wiki/vswitchperf_test_spec_review</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="LTD">
- <front>
- <title>LTD Test Specification
- http://artifacts.opnfv.org/vswitchperf/docs/requirements/index.html</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="BrahRel">
- <front>
- <title>Brahmaputra, Second OPNFV Release
- https://www.opnfv.org/brahmaputra</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="IFA003">
- <front>
- <title>https://docbox.etsi.org/ISG/NFV/Open/Drafts/IFA003_Acceleration_-_vSwitch_Spec/</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
- </references>
- </back>
-</rfc>
diff --git a/docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-02.xml b/docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-02.xml
deleted file mode 100644
index 9157763e..00000000
--- a/docs/testing/developer/requirements/ietf_draft/draft-vsperf-bmwg-vswitch-opnfv-02.xml
+++ /dev/null
@@ -1,1016 +0,0 @@
-<?xml version="1.0" encoding="US-ASCII"?>
-<!DOCTYPE rfc SYSTEM "rfc2629.dtd">
-<?rfc toc="yes"?>
-<?rfc tocompact="yes"?>
-<?rfc tocdepth="3"?>
-<?rfc tocindent="yes"?>
-<?rfc symrefs="yes"?>
-<?rfc sortrefs="yes"?>
-<?rfc comments="yes"?>
-<?rfc inline="yes"?>
-<?rfc compact="yes"?>
-<?rfc subcompact="no"?>
-<rfc category="info" docName="draft-vsperf-bmwg-vswitch-opnfv-02"
- ipr="trust200902">
- <front>
- <title abbrev="Benchmarking vSwitches">Benchmarking Virtual Switches in
- OPNFV</title>
-
- <author fullname="Maryam Tahhan" initials="M." surname="Tahhan">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>maryam.tahhan@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Billy O'Mahony" initials="B." surname="O'Mahony">
- <organization>Intel</organization>
-
- <address>
- <postal>
- <street/>
-
- <city/>
-
- <region/>
-
- <code/>
-
- <country/>
- </postal>
-
- <phone/>
-
- <facsimile/>
-
- <email>billy.o.mahony@intel.com</email>
-
- <uri/>
- </address>
- </author>
-
- <author fullname="Al Morton" initials="A." surname="Morton">
- <organization>AT&amp;T Labs</organization>
-
- <address>
- <postal>
- <street>200 Laurel Avenue South</street>
-
- <city>Middletown,</city>
-
- <region>NJ</region>
-
- <code>07748</code>
-
- <country>USA</country>
- </postal>
-
- <phone>+1 732 420 1571</phone>
-
- <facsimile>+1 732 368 1192</facsimile>
-
- <email>acmorton@att.com</email>
-
- <uri>http://home.comcast.net/~acmacm/</uri>
- </address>
- </author>
-
- <date day="21" month="March" year="2016"/>
-
- <abstract>
- <t>This memo describes the progress of the Open Platform for NFV (OPNFV)
- project on virtual switch performance "VSWITCHPERF". This project
- intends to build on the current and completed work of the Benchmarking
- Methodology Working Group in IETF, by referencing existing literature.
- The Benchmarking Methodology Working Group has traditionally conducted
- laboratory characterization of dedicated physical implementations of
- internetworking functions. Therefore, this memo begins to describe the
- additional considerations when virtual switches are implemented in
- general-purpose hardware. The expanded tests and benchmarks are also
- influenced by the OPNFV mission to support virtualization of the "telco"
- infrastructure.</t>
- </abstract>
-
- <note title="Requirements Language">
- <t>The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
- "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
- document are to be interpreted as described in <xref
- target="RFC2119">RFC 2119</xref>.</t>
-
- <t/>
- </note>
- </front>
-
- <middle>
- <section title="Introduction">
- <t>Benchmarking Methodology Working Group (BMWG) has traditionally
- conducted laboratory characterization of dedicated physical
- implementations of internetworking functions. The Black-box Benchmarks
- of Throughput, Latency, Forwarding Rates and others have served our
- industry for many years. Now, Network Function Virtualization (NFV) has
- the goal to transform how internetwork functions are implemented, and
- therefore has garnered much attention.</t>
-
- <t>This memo summarizes the progress of the Open Platform for NFV
- (OPNFV) project on virtual switch performance characterization,
- "VSWITCHPERF", through the Brahmaputra (second) release <xref
- target="BrahRel"/>. This project intends to build on the current and
- completed work of the Benchmarking Methodology Working Group in IETF, by
- referencing existing literature. For example, currently the most often
- referenced RFC is <xref target="RFC2544"/> (which depends on <xref
- target="RFC1242"/>) and foundation of the benchmarking work in OPNFV is
- common and strong.</t>
-
- <t>See
- https://wiki.opnfv.org/characterize_vswitch_performance_for_telco_nfv_use_cases
- for more background, and the OPNFV website for general information:
- https://www.opnfv.org/</t>
-
- <t>The authors note that OPNFV distinguishes itself from other open
- source compute and networking projects through its emphasis on existing
- "telco" services as opposed to cloud-computing. There are many ways in
- which telco requirements have different emphasis on performance
- dimensions when compared to cloud computing: support for and transfer of
- isochronous media streams is one example.</t>
-
- <t>Note also that the move to NFV Infrastructure has resulted in many
- new benchmarking initiatives across the industry. The authors are
- currently doing their best to maintain alignment with many other
- projects, and this Internet Draft is one part of the efforts. We
- acknowledge the early work in <xref
- target="I-D.huang-bmwg-virtual-network-performance"/>, and useful
- discussion with the authors.</t>
- </section>
-
- <section title="Scope">
- <t>The primary purpose and scope of the memo is to inform the industry
- of work-in-progress that builds on the body of extensive BMWG literature
- and experience, and describe the extensions needed for benchmarking
- virtual switches. Inital feedback indicates that many of these
- extensions may be applicable beyond the current scope (to hardware
- switches in the NFV Infrastructure and to virtual routers, for example).
- Additionally, this memo serves as a vehicle to include more detail and
- commentary from BMWG and other Open Source communities, under BMWG's
- chartered work to characterize the NFV Infrastructure (a virtual switch
- is an important aspect of that infrastructure).</t>
- </section>
-
- <section title="Benchmarking Considerations">
- <t>This section highlights some specific considerations (from <xref
- target="I-D.ietf-bmwg-virtual-net"/>)related to Benchmarks for virtual
- switches. The OPNFV project is sharing its present view on these areas,
- as they develop their specifications in the Level Test Design (LTD)
- document.</t>
-
- <section title="Comparison with Physical Network Functions">
- <t>To compare the performance of virtual designs and implementations
- with their physical counterparts, identical benchmarks are needed.
- BMWG has developed specifications for many network functions this memo
- re-uses existing benchmarks through references, and expands them
- during development of new methods. A key configuration aspect is the
- number of parallel cores required to achieve comparable performance
- with a given physical device, or whether some limit of scale was
- reached before the cores could achieve the comparable level.</t>
-
- <t>It's unlikely that the virtual switch will be the only application
- running on the SUT, so CPU utilization, Cache utilization, and Memory
- footprint should also be recorded for the virtual implementations of
- internetworking functions.</t>
- </section>
-
- <section title="Continued Emphasis on Black-Box Benchmarks">
- <t>External observations remain essential as the basis for Benchmarks.
- Internal observations with fixed specification and interpretation will
- be provided in parallel to assist the development of operations
- procedures when the technology is deployed.</t>
- </section>
-
- <section title="New Configuration Parameters">
- <t>A key consideration when conducting any sort of benchmark is trying
- to ensure the consistency and repeatability of test results. When
- benchmarking the performance of a vSwitch there are many factors that
- can affect the consistency of results, one key factor is matching the
- various hardware and software details of the SUT. This section lists
- some of the many new parameters which this project believes are
- critical to report in order to achieve repeatability.</t>
-
- <t>Hardware details including:</t>
-
- <t><list style="symbols">
- <t>Platform details</t>
-
- <t>Processor details</t>
-
- <t>Memory information (type and size)</t>
-
- <t>Number of enabled cores</t>
-
- <t>Number of cores used for the test</t>
-
- <t>Number of physical NICs, as well as their details
- (manufacturer, versions, type and the PCI slot they are plugged
- into)</t>
-
- <t>NIC interrupt configuration</t>
-
- <t>BIOS version, release date and any configurations that were
- modified</t>
-
- <t>CPU microcode level</t>
-
- <t>Memory DIMM configurations (quad rank performance may not be
- the same as dual rank) in size, freq and slot locations</t>
-
- <t>PCI configuration parameters (payload size, early ack
- option...)</t>
-
- <t>Power management at all levels (ACPI sleep states, processor
- package, OS...)</t>
- </list>Software details including:</t>
-
- <t><list style="symbols">
- <t>OS parameters and behavior (text vs graphical no one typing at
- the console on one system)</t>
-
- <t>OS version (for host and VNF)</t>
-
- <t>Kernel version (for host and VNF)</t>
-
- <t>GRUB boot parameters (for host and VNF)</t>
-
- <t>Hypervisor details (Type and version)</t>
-
- <t>Selected vSwitch, version number or commit id used</t>
-
- <t>vSwitch launch command line if it has been parameterised</t>
-
- <t>Memory allocation to the vSwitch</t>
-
- <t>which NUMA node it is using, and how many memory channels</t>
-
- <t>DPDK or any other SW dependency version number or commit id
- used</t>
-
- <t>Memory allocation to a VM - if it's from Hugpages/elsewhere</t>
-
- <t>VM storage type: snapshot/independent persistent/independent
- non-persistent</t>
-
- <t>Number of VMs</t>
-
- <t>Number of Virtual NICs (vNICs), versions, type and driver</t>
-
- <t>Number of virtual CPUs and their core affinity on the host</t>
-
- <t>Number vNIC interrupt configuration</t>
-
- <t>Thread affinitization for the applications (including the
- vSwitch itself) on the host</t>
-
- <t>Details of Resource isolation, such as CPUs designated for
- Host/Kernel (isolcpu) and CPUs designated for specific processes
- (taskset). - Test duration. - Number of flows.</t>
- </list></t>
-
- <t>Test Traffic Information:<list style="symbols">
- <t>Traffic type - UDP, TCP, IMIX / Other</t>
-
- <t>Packet Sizes</t>
-
- <t>Deployment Scenario</t>
- </list></t>
-
- <t/>
- </section>
-
- <section title="Flow classification">
- <t>Virtual switches group packets into flows by processing and
- matching particular packet or frame header information, or by matching
- packets based on the input ports. Thus a flow can be thought of a
- sequence of packets that have the same set of header field values or
- have arrived on the same port. Performance results can vary based on
- the parameters the vSwitch uses to match for a flow. The recommended
- flow classification parameters for any vSwitch performance tests are:
- the input port, the source IP address, the destination IP address and
- the Ethernet protocol type field. It is essential to increase the flow
- timeout time on a vSwitch before conducting any performance tests that
- do not measure the flow setup time. Normally the first packet of a
- particular stream will install the flow in the virtual switch which
- adds an additional latency, subsequent packets of the same flow are
- not subject to this latency if the flow is already installed on the
- vSwitch.</t>
- </section>
-
- <section title="Benchmarks using Baselines with Resource Isolation">
- <t>This outline describes measurement of baseline with isolated
- resources at a high level, which is the intended approach at this
- time.</t>
-
- <t><list style="numbers">
- <t>Baselines: <list style="symbols">
- <t>Optional: Benchmark platform forwarding capability without
- a vswitch or VNF for at least 72 hours (serves as a means of
- platform validation and a means to obtain the base performance
- for the platform in terms of its maximum forwarding rate and
- latency). <figure>
- <preamble>Benchmark platform forwarding
- capability</preamble>
-
- <artwork align="right"><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | Simple Forwarding App | | Host
- | | | | |
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmark VNF forwarding capability with direct
- connectivity (vSwitch bypass, e.g., SR/IOV) for at least 72
- hours (serves as a means of VNF validation and a means to
- obtain the base performance for the VNF in terms of its
- maximum forwarding rate and latency). The metrics gathered
- from this test will serve as a key comparison point for
- vSwitch bypass technologies performance and vSwitch
- performance. <figure align="right">
- <preamble>Benchmark VNF forwarding capability</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | VNF | | |
- | | | | |
- | +------------------------------------------+ | |
- | | Passthrough/SR-IOV | | Host
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
-
- <postamble/>
- </figure></t>
-
- <t>Benchmarking with isolated resources alone, with other
- resources (both HW&amp;SW) disabled Example, vSw and VM are
- SUT</t>
-
- <t>Benchmarking with isolated resources alone, leaving some
- resources unused</t>
-
- <t>Benchmark with isolated resources and all resources
- occupied</t>
- </list></t>
-
- <t>Next Steps<list style="symbols">
- <t>Limited sharing</t>
-
- <t>Production scenarios</t>
-
- <t>Stressful scenarios</t>
- </list></t>
- </list></t>
- </section>
- </section>
-
- <section title="VSWITCHPERF Specification Summary">
- <t>The overall specification in preparation is referred to as a Level
- Test Design (LTD) document, which will contain a suite of performance
- tests. The base performance tests in the LTD are based on the
- pre-existing specifications developed by BMWG to test the performance of
- physical switches. These specifications include:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2544"/> Benchmarking Methodology for Network
- Interconnect Devices</t>
-
- <t><xref target="RFC2889"/> Benchmarking Methodology for LAN
- Switching</t>
-
- <t><xref target="RFC6201"/> Device Reset Characterization</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t>Some of the above/newer RFCs are being applied in benchmarking for
- the first time, and represent a development challenge for test equipment
- developers. Fortunately, many members of the testing system community
- have engaged on the VSPERF project, including an open source test
- system.</t>
-
- <t>In addition to this, the LTD also re-uses the terminology defined
- by:</t>
-
- <t><list style="symbols">
- <t><xref target="RFC2285"/> Benchmarking Terminology for LAN
- Switching Devices</t>
-
- <t><xref target="RFC5481"/> Packet Delay Variation Applicability
- Statement</t>
- </list></t>
-
- <t/>
-
- <t>Specifications to be included in future updates of the LTD
- include:<list style="symbols">
- <t><xref target="RFC3918"/> Methodology for IP Multicast
- Benchmarking</t>
-
- <t><xref target="RFC4737"/> Packet Reordering Metrics</t>
- </list></t>
-
- <t>As one might expect, the most fundamental internetworking
- characteristics of Throughput and Latency remain important when the
- switch is virtualized, and these benchmarks figure prominently in the
- specification.</t>
-
- <t>When considering characteristics important to "telco" network
- functions, we must begin to consider additional performance metrics. In
- this case, the project specifications have referenced metrics from the
- IETF IP Performance Metrics (IPPM) literature. This means that the <xref
- target="RFC2544"/> test of Latency is replaced by measurement of a
- metric derived from IPPM's <xref target="RFC2679"/>, where a set of
- statistical summaries will be provided (mean, max, min, etc.). Further
- metrics planned to be benchmarked include packet delay variation as
- defined by <xref target="RFC5481"/> , reordering, burst behaviour, DUT
- availability, DUT capacity and packet loss in long term testing at
- Throughput level, where some low-level of background loss may be present
- and characterized.</t>
-
- <t>Tests have been (or will be) designed to collect the metrics
- below:</t>
-
- <t><list style="symbols">
- <t>Throughput Tests to measure the maximum forwarding rate (in
- frames per second or fps) and bit rate (in Mbps) for a constant load
- (as defined by <xref target="RFC1242"/>) without traffic loss.</t>
-
- <t>Packet and Frame Delay Distribution Tests to measure average, min
- and max packet and frame delay for constant loads.</t>
-
- <t>Packet Delay Tests to understand latency distribution for
- different packet sizes and over an extended test run to uncover
- outliers.</t>
-
- <t>Scalability Tests to understand how the virtual switch performs
- as the number of flows, active ports, complexity of the forwarding
- logic&rsquo;s configuration&hellip; it has to deal with
- increases.</t>
-
- <t>Stream Performance Tests (TCP, UDP) to measure bulk data transfer
- performance, i.e. how fast systems can send and receive data through
- the switch.</t>
-
- <t>Control Path and Datapath Coupling Tests, to understand how
- closely coupled the datapath and the control path are as well as the
- effect of this coupling on the performance of the DUT (example:
- delay of the initial packet of a flow).</t>
-
- <t>CPU and Memory Consumption Tests to understand the virtual
- switch&rsquo;s footprint on the system, usually conducted as
- auxiliary measurements with benchmarks above. They include: CPU
- utilization, Cache utilization and Memory footprint.</t>
-
- <t>The so-called "Soak" tests, where the selected test is conducted
- over a long period of time (with an ideal duration of 24 hours, and
- at least 6 hours). The purpose of soak tests is to capture transient
- changes in performance which may occur due to infrequent processes
- or the low probability coincidence of two or more processes. The
- performance must be evaluated periodically during continuous
- testing, and this results in use of <xref target="RFC2889"/> Frame
- Rate metrics instead of <xref target="RFC2544"/> Throughput (which
- requires stopping traffic to allow time for all traffic to exit
- internal queues).</t>
- </list></t>
-
- <t>Future/planned test specs include:<list style="symbols">
- <t>Request/Response Performance Tests (TCP, UDP) which measure the
- transaction rate through the switch.</t>
-
- <t>Noisy Neighbour Tests, to understand the effects of resource
- sharing on the performance of a virtual switch.</t>
-
- <t>Tests derived from examination of ETSI NFV Draft GS IFA003
- requirements <xref target="IFA003"/> on characterization of
- acceleration technologies applied to vswitches.</t>
- </list>The flexibility of deployment of a virtual switch within a
- network means that the BMWG IETF existing literature needs to be used to
- characterize the performance of a switch in various deployment
- scenarios. The deployment scenarios under consideration include:</t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to physical
- port</preamble>
-
- <artwork><![CDATA[ __
- +--------------------------------------------------+ |
- | +--------------------+ | |
- | | | | |
- | | v | | Host
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure></t>
-
- <t><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ : | |
- | | | | | Guest
- | : v | |
- | +---------------+ +---------------+ | |
- | | logical port 0| | logical port 1| | |
- +---+---------------+-----------+---------------+---+ __|
- ^ :
- | |
- : v __
- +---+---------------+----------+---------------+---+ |
- | | logical port 0| | logical port 1| | |
- | +---------------+ +---------------+ | |
- | ^ : | |
- | | | | | Host
- | : v | |
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF to virtual switch
- to VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | |
- | | v | | | v | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 1 | | | | 0 1 | | |
- +---+---------------+--+ +---+---------------+--+__|
- ^ : ^ :
- | | | |
- : v : v _
- +---+---------------+---------+---------------+--+ |
- | | 0 1 | | 3 4 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | ^ | ^ | | | Host
- | | |-----------------| v | |
- | +--------------+ +--------------+ | |
- | | phy ports | vSwitch | phy ports | | |
- +---+--------------+----------+--------------+---+_|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>Physical port to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ | |
- | | | | Guest
- | : | |
- | +---------------+ | |
- | | logical port 0| | |
- +---+---------------+-------------------------------+ __|
- ^
- |
- : __
- +---+---------------+------------------------------+ |
- | | logical port 0| | |
- | +---------------+ | |
- | ^ | |
- | | | | Host
- | : | |
- | +--------------+ | |
- | | phy port | vSwitch | |
- +---+--------------+------------ -------------- ---+ __|
- ^
- |
- :
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to physical port</preamble>
-
- <artwork><![CDATA[ __
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | : | |
- | | | | Guest
- | v | |
- | +---------------+ | |
- | | logical port | | |
- +-------------------------------+---------------+---+ __|
- :
- |
- v __
- +------------------------------+---------------+---+ |
- | | logical port | | |
- | +---------------+ | |
- | : | |
- | | | | Host
- | v | |
- | +--------------+ | |
- | vSwitch | phy port | | |
- +-------------------------------+--------------+---+ __|
- :
- |
- v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+]]></artwork>
- </figure><figure>
- <preamble>VNF to virtual switch to VNF</preamble>
-
- <artwork><![CDATA[ __
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | | | | ^ | |
- | v | | | | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 | | | | 0 | | |
- +---+---------------+--+ +---+---------------+--+__|
- : ^
- | |
- v : _
- +---+---------------+---------+---------------+--+ |
- | | 1 | | 1 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | | ^ | | Host
- | L-----------------+ | |
- | | |
- | vSwitch | |
- +------------------------------------------------+_|]]></artwork>
- </figure></t>
-
- <t>A set of Deployment Scenario figures is available on the VSPERF Test
- Methodology Wiki page <xref target="TestTopo"/>.</t>
- </section>
-
- <section title="3x3 Matrix Coverage">
- <t>This section organizes the many existing test specifications into the
- "3x3" matrix (introduced in <xref target="I-D.ietf-bmwg-virtual-net"/>).
- Because the LTD specification ID names are quite long, this section is
- organized into lists for each occupied cell of the matrix (not all are
- occupied, also the matrix has grown to 3x4 to accommodate scale metrics
- when displaying the coverage of many metrics/benchmarks). The current
- version of the LTD specification is available <xref target="LTD"/>.</t>
-
- <t>The tests listed below assess the activation of paths in the data
- plane, rather than the control plane.</t>
-
- <t>A complete list of tests with short summaries is available on the
- VSPERF "LTD Test Spec Overview" Wiki page <xref target="LTDoverV"/>.</t>
-
- <section title="Speed of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressLearningRate</t>
-
- <t>PacketLatency.InitialPacketProcessingLatency</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Activation section">
- <t><list style="symbols">
- <t>CPDP.Coupling.Flow.Addition</t>
- </list></t>
- </section>
-
- <section title="Reliability of Activation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.SystemRecoveryTime</t>
-
- <t>Throughput.RFC2544.ResetTime</t>
- </list></t>
- </section>
-
- <section title="Scale of Activation">
- <t><list style="symbols">
- <t>Activation.RFC2889.AddressCachingCapacity</t>
- </list></t>
- </section>
-
- <section title="Speed of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2544.PacketLossRate</t>
-
- <t>CPU.RFC2544.0PacketLoss</t>
-
- <t>Throughput.RFC2544.PacketLossRateFrameModification</t>
-
- <t>Throughput.RFC2544.BackToBackFrames</t>
-
- <t>Throughput.RFC2889.MaxForwardingRate</t>
-
- <t>Throughput.RFC2889.ForwardPressure</t>
-
- <t>Throughput.RFC2889.BroadcastFrameForwarding</t>
- </list></t>
- </section>
-
- <section title="Accuracy of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.ErrorFramesFiltering</t>
-
- <t>Throughput.RFC2544.Profile</t>
- </list></t>
- </section>
-
- <section title="Reliability of Operation">
- <t><list style="symbols">
- <t>Throughput.RFC2889.Soak</t>
-
- <t>Throughput.RFC2889.SoakFrameModification</t>
-
- <t>PacketDelayVariation.RFC3393.Soak</t>
- </list></t>
- </section>
-
- <section title="Scalability of Operation">
- <t><list style="symbols">
- <t>Scalability.RFC2544.0PacketLoss</t>
-
- <t>MemoryBandwidth.RFC2544.0PacketLoss.Scalability</t>
- </list></t>
- </section>
-
- <section title="Summary">
- <t><figure>
- <artwork><![CDATA[|------------------------------------------------------------------------|
-| | | | | |
-| | SPEED | ACCURACY | RELIABILITY | SCALE |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Activation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| Operation | X | X | X | X |
-| | | | | |
-|------------------------------------------------------------------------|
-| | | | | |
-| De-activation | | | | |
-| | | | | |
-|------------------------------------------------------------------------|]]></artwork>
- </figure></t>
- </section>
- </section>
-
- <section title="Security Considerations">
- <t>Benchmarking activities as described in this memo are limited to
- technology characterization of a Device Under Test/System Under Test
- (DUT/SUT) using controlled stimuli in a laboratory environment, with
- dedicated address space and the constraints specified in the sections
- above.</t>
-
- <t>The benchmarking network topology will be an independent test setup
- and MUST NOT be connected to devices that may forward the test traffic
- into a production network, or misroute traffic to the test management
- network.</t>
-
- <t>Further, benchmarking is performed on a "black-box" basis, relying
- solely on measurements observable external to the DUT/SUT.</t>
-
- <t>Special capabilities SHOULD NOT exist in the DUT/SUT specifically for
- benchmarking purposes. Any implications for network security arising
- from the DUT/SUT SHOULD be identical in the lab and in production
- networks.</t>
- </section>
-
- <section anchor="IANA" title="IANA Considerations">
- <t>No IANA Action is requested at this time.</t>
- </section>
-
- <section title="Acknowledgements">
- <t>The authors appreciate and acknowledge comments from Scott Bradner,
- Marius Georgescu, Ramki Krishnan, Doug Montgomery, Martin Klozik,
- Christian Trautman, and others for their reviews.</t>
- </section>
- </middle>
-
- <back>
- <references title="Normative References">
- <?rfc ?>
-
- <?rfc include="reference.RFC.2119"?>
-
- <?rfc ?>
-
- <?rfc include="reference.RFC.2330"?>
-
- <?rfc include='reference.RFC.2544'?>
-
- <?rfc include="reference.RFC.2679"?>
-
- <?rfc include='reference.RFC.2680'?>
-
- <?rfc include='reference.RFC.3393'?>
-
- <?rfc include='reference.RFC.3432'?>
-
- <?rfc include='reference.RFC.2681'?>
-
- <?rfc include='reference.RFC.5905'?>
-
- <?rfc include='reference.RFC.4689'?>
-
- <?rfc include='reference.RFC.4737'?>
-
- <?rfc include='reference.RFC.5357'?>
-
- <?rfc include='reference.RFC.2889'?>
-
- <?rfc include='reference.RFC.3918'?>
-
- <?rfc include='reference.RFC.6201'?>
-
- <?rfc include='reference.RFC.2285'?>
-
- <reference anchor="NFV.PER001">
- <front>
- <title>Network Function Virtualization: Performance and Portability
- Best Practices</title>
-
- <author fullname="ETSI NFV" initials="" surname="">
- <organization/>
- </author>
-
- <date month="June" year="2014"/>
- </front>
-
- <seriesInfo name="Group Specification"
- value="ETSI GS NFV-PER 001 V1.1.1 (2014-06)"/>
-
- <format type="PDF"/>
- </reference>
- </references>
-
- <references title="Informative References">
- <?rfc include='reference.RFC.1242'?>
-
- <?rfc include='reference.RFC.5481'?>
-
- <?rfc include='reference.RFC.6049'?>
-
- <?rfc include='reference.RFC.6248'?>
-
- <?rfc include='reference.RFC.6390'?>
-
- <?rfc include='reference.I-D.ietf-bmwg-virtual-net'?>
-
- <?rfc include='reference.I-D.huang-bmwg-virtual-network-performance'?>
-
- <reference anchor="TestTopo">
- <front>
- <title>Test Topologies
- https://wiki.opnfv.org/vsperf/test_methodology</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="LTDoverV">
- <front>
- <title>LTD Test Spec Overview
- https://wiki.opnfv.org/wiki/vswitchperf_test_spec_review</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="LTD">
- <front>
- <title>LTD Test Specification
- http://artifacts.opnfv.org/vswitchperf/docs/requirements/index.html</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="BrahRel">
- <front>
- <title>Brahmaputra, Second OPNFV Release
- https://www.opnfv.org/brahmaputra</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
-
- <reference anchor="IFA003">
- <front>
- <title>https://docbox.etsi.org/ISG/NFV/Open/Drafts/IFA003_Acceleration_-_vSwitch_Spec/</title>
-
- <author>
- <organization/>
- </author>
-
- <date/>
- </front>
- </reference>
- </references>
- </back>
-</rfc>
diff --git a/docs/testing/developer/requirements/vm2vm_alternative_benchmark.png b/docs/testing/developer/requirements/vm2vm_alternative_benchmark.png
deleted file mode 100644
index d21334ba..00000000
--- a/docs/testing/developer/requirements/vm2vm_alternative_benchmark.png
+++ /dev/null
Binary files differ
diff --git a/docs/testing/developer/requirements/vm2vm_benchmark.png b/docs/testing/developer/requirements/vm2vm_benchmark.png
deleted file mode 100644
index 3a85e51f..00000000
--- a/docs/testing/developer/requirements/vm2vm_benchmark.png
+++ /dev/null
Binary files differ
diff --git a/docs/testing/developer/requirements/vm2vm_hypervisor_benchmark.png b/docs/testing/developer/requirements/vm2vm_hypervisor_benchmark.png
deleted file mode 100644
index b5b76e8a..00000000
--- a/docs/testing/developer/requirements/vm2vm_hypervisor_benchmark.png
+++ /dev/null
Binary files differ
diff --git a/docs/testing/developer/requirements/vm2vm_virtual_interface_benchmark.png b/docs/testing/developer/requirements/vm2vm_virtual_interface_benchmark.png
deleted file mode 100644
index 55294af6..00000000
--- a/docs/testing/developer/requirements/vm2vm_virtual_interface_benchmark.png
+++ /dev/null
Binary files differ
diff --git a/docs/testing/developer/requirements/vswitchperf_ltd.rst b/docs/testing/developer/requirements/vswitchperf_ltd.rst
deleted file mode 100644
index e1372520..00000000
--- a/docs/testing/developer/requirements/vswitchperf_ltd.rst
+++ /dev/null
@@ -1,1712 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-******************************
-VSPERF LEVEL TEST DESIGN (LTD)
-******************************
-
-.. 3.1
-
-============
-Introduction
-============
-
-The intention of this Level Test Design (LTD) document is to specify the set of
-tests to carry out in order to objectively measure the current characteristics
-of a virtual switch in the Network Function Virtualization Infrastructure
-(NFVI) as well as the test pass criteria. The detailed test cases will be
-defined in details-of-LTD_, preceded by the doc-id-of-LTD_ and the scope-of-LTD_.
-
-This document is currently in draft form.
-
-.. 3.1.1
-
-
-.. _doc-id-of-LTD:
-
-Document identifier
-===================
-
-The document id will be used to uniquely
-identify versions of the LTD. The format for the document id will be:
-OPNFV\_vswitchperf\_LTD\_REL\_STATUS, where by the
-status is one of: draft, reviewed, corrected or final. The document id
-for this version of the LTD is:
-OPNFV\_vswitchperf\_LTD\_Brahmaputra\_REVIEWED.
-
-.. 3.1.2
-
-.. _scope-of-LTD:
-
-Scope
-=====
-
-The main purpose of this project is to specify a suite of
-performance tests in order to objectively measure the current packet
-transfer characteristics of a virtual switch in the NFVI. The intent of
-the project is to facilitate testing of any virtual switch. Thus, a
-generic suite of tests shall be developed, with no hard dependencies to
-a single implementation. In addition, the test case suite shall be
-architecture independent.
-
-The test cases developed in this project shall not form part of a
-separate test framework, all of these tests may be inserted into the
-Continuous Integration Test Framework and/or the Platform Functionality
-Test Framework - if a vSwitch becomes a standard component of an OPNFV
-release.
-
-.. 3.1.3
-
-References
-==========
-
-* `RFC 1242 Benchmarking Terminology for Network Interconnection
- Devices <http://www.ietf.org/rfc/rfc1242.txt>`__
-* `RFC 2544 Benchmarking Methodology for Network Interconnect
- Devices <http://www.ietf.org/rfc/rfc2544.txt>`__
-* `RFC 2285 Benchmarking Terminology for LAN Switching
- Devices <http://www.ietf.org/rfc/rfc2285.txt>`__
-* `RFC 2889 Benchmarking Methodology for LAN Switching
- Devices <http://www.ietf.org/rfc/rfc2889.txt>`__
-* `RFC 3918 Methodology for IP Multicast
- Benchmarking <http://www.ietf.org/rfc/rfc3918.txt>`__
-* `RFC 4737 Packet Reordering
- Metrics <http://www.ietf.org/rfc/rfc4737.txt>`__
-* `RFC 5481 Packet Delay Variation Applicability
- Statement <http://www.ietf.org/rfc/rfc5481.txt>`__
-* `RFC 6201 Device Reset
- Characterization <http://tools.ietf.org/html/rfc6201>`__
-
-.. 3.2
-
-.. _details-of-LTD:
-
-================================
-Details of the Level Test Design
-================================
-
-This section describes the features to be tested (FeaturesToBeTested-of-LTD_), and
-identifies the sets of test cases or scenarios (TestIdentification-of-LTD_).
-
-.. 3.2.1
-
-.. _FeaturesToBeTested-of-LTD:
-
-Features to be tested
-=====================
-
-Characterizing virtual switches (i.e. Device Under Test (DUT) in this document)
-includes measuring the following performance metrics:
-
-- Throughput
-- Packet delay
-- Packet delay variation
-- Packet loss
-- Burst behaviour
-- Packet re-ordering
-- Packet correctness
-- Availability and capacity of the DUT
-
-.. 3.2.2
-
-.. _TestIdentification-of-LTD:
-
-Test identification
-===================
-
-.. 3.2.2.1
-
-Throughput tests
-----------------
-
-The following tests aim to determine the maximum forwarding rate that
-can be achieved with a virtual switch. The list is not exhaustive but
-should indicate the type of tests that should be required. It is
-expected that more will be added.
-
-.. 3.2.2.1.1
-
-.. _PacketLossRatio:
-
-Test ID: LTD.Throughput.RFC2544.PacketLossRatio
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2544 X% packet loss ratio Throughput and Latency Test
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- This test determines the DUT's maximum forwarding rate with X% traffic
- loss for a constant load (fixed length frames at a fixed interval time).
- The default loss percentages to be tested are: - X = 0% - X = 10^-7%
-
- Note: Other values can be tested if required by the user.
-
- The selected frame sizes are those previously defined under
- :ref:`default-test-parameters`.
- The test can also be used to determine the average latency of the traffic.
-
- Under the `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__
- test methodology, the test duration will
- include a number of trials; each trial should run for a minimum period
- of 60 seconds. A binary search methodology must be applied for each
- trial to obtain the final result.
-
- **Expected Result**: At the end of each trial, the presence or absence
- of loss determines the modification of offered load for the next trial,
- converging on a maximum rate, or
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__ Throughput with X%
- loss.
- The Throughput load is re-used in related
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__ tests and other
- tests.
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The maximum forwarding rate in Frames Per Second (FPS) and Mbps of
- the DUT for each frame size with X% packet loss.
- - The average latency of the traffic flow when passing through the DUT
- (if testing for latency, note that this average is different from the
- test specified in Section 26.3 of
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__).
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
-.. 3.2.2.1.2
-
-.. _PacketLossRatioFrameModification:
-
-Test ID: LTD.Throughput.RFC2544.PacketLossRatioFrameModification
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2544 X% packet loss Throughput and Latency Test with
- packet modification
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- This test determines the DUT's maximum forwarding rate with X% traffic
- loss for a constant load (fixed length frames at a fixed interval time).
- The default loss percentages to be tested are: - X = 0% - X = 10^-7%
-
- Note: Other values can be tested if required by the user.
-
- The selected frame sizes are those previously defined under
- :ref:`default-test-parameters`.
- The test can also be used to determine the average latency of the traffic.
-
- Under the `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__
- test methodology, the test duration will
- include a number of trials; each trial should run for a minimum period
- of 60 seconds. A binary search methodology must be applied for each
- trial to obtain the final result.
-
- During this test, the DUT must perform the following operations on the
- traffic flow:
-
- - Perform packet parsing on the DUT's ingress port.
- - Perform any relevant address look-ups on the DUT's ingress ports.
- - Modify the packet header before forwarding the packet to the DUT's
- egress port. Packet modifications include:
-
- - Modifying the Ethernet source or destination MAC address.
- - Modifying/adding a VLAN tag. (**Recommended**).
- - Modifying/adding a MPLS tag.
- - Modifying the source or destination ip address.
- - Modifying the TOS/DSCP field.
- - Modifying the source or destination ports for UDP/TCP/SCTP.
- - Modifying the TTL.
-
- **Expected Result**: The Packet parsing/modifications require some
- additional degree of processing resource, therefore the
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__
- Throughput is expected to be somewhat lower than the Throughput level
- measured without additional steps. The reduction is expected to be
- greatest on tests with the smallest packet sizes (greatest header
- processing rates).
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The maximum forwarding rate in Frames Per Second (FPS) and Mbps of
- the DUT for each frame size with X% packet loss and packet
- modification operations being performed by the DUT.
- - The average latency of the traffic flow when passing through the DUT
- (if testing for latency, note that this average is different from the
- test specified in Section 26.3 of
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__).
- - The `RFC5481 <https://www.rfc-editor.org/rfc/rfc5481.txt>`__
- PDV form of delay variation on the traffic flow,
- using the 99th percentile.
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
-.. 3.2.2.1.3
-
-Test ID: LTD.Throughput.RFC2544.Profile
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2544 Throughput and Latency Profile
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- This test reveals how throughput and latency degrades as the offered
- rate varies in the region of the DUT's maximum forwarding rate as
- determined by LTD.Throughput.RFC2544.PacketLossRatio (0% Packet Loss).
- For example it can be used to determine if the degradation of throughput
- and latency as the offered rate increases is slow and graceful or sudden
- and severe.
-
- The selected frame sizes are those previously defined under
- :ref:`default-test-parameters`.
-
- The offered traffic rate is described as a percentage delta with respect
- to the DUT's RFC 2544 Throughput as determined by
- LTD.Throughput.RFC2544.PacketLoss Ratio (0% Packet Loss case). A delta
- of 0% is equivalent to an offered traffic rate equal to the RFC 2544
- Maximum Throughput; A delta of +50% indicates an offered rate half-way
- between the Maximum RFC2544 Throughput and line-rate, whereas a delta of
- -50% indicates an offered rate of half the RFC 2544 Maximum Throughput.
- Therefore the range of the delta figure is natuarlly bounded at -100%
- (zero offered traffic) and +100% (traffic offered at line rate).
-
- The following deltas to the maximum forwarding rate should be applied:
-
- - -50%, -10%, 0%, +10% & +50%
-
- **Expected Result**: For each packet size a profile should be produced
- of how throughput and latency vary with offered rate.
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The forwarding rate in Frames Per Second (FPS) and Mbps of the DUT
- for each delta to the maximum forwarding rate and for each frame
- size.
- - The average latency for each delta to the maximum forwarding rate and
- for each frame size.
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
- - Any failures experienced (for example if the vSwitch crashes, stops
- processing packets, restarts or becomes unresponsive to commands)
- when the offered load is above Maximum Throughput MUST be recorded
- and reported with the results.
-
-.. 3.2.2.1.4
-
-Test ID: LTD.Throughput.RFC2544.SystemRecoveryTime
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2544 System Recovery Time Test
-
- **Prerequisite Test** LTD.Throughput.RFC2544.PacketLossRatio
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to determine the length of time it takes the DUT
- to recover from an overload condition for a constant load (fixed length
- frames at a fixed interval time). The selected frame sizes are those
- previously defined under :ref:`default-test-parameters`,
- traffic should be sent to the DUT under normal conditions. During the
- duration of the test and while the traffic flows are passing though the
- DUT, at least one situation leading to an overload condition for the DUT
- should occur. The time from the end of the overload condition to when
- the DUT returns to normal operations should be measured to determine
- recovery time. Prior to overloading the DUT, one should record the
- average latency for 10,000 packets forwarded through the DUT.
-
- The overload condition SHOULD be to transmit traffic at a very high
- frame rate to the DUT (150% of the maximum 0% packet loss rate as
- determined by LTD.Throughput.RFC2544.PacketLossRatio or line-rate
- whichever is lower), for at least 60 seconds, then reduce the frame rate
- to 75% of the maximum 0% packet loss rate. A number of time-stamps
- should be recorded: - Record the time-stamp at which the frame rate was
- reduced and record a second time-stamp at the time of the last frame
- lost. The recovery time is the difference between the two timestamps. -
- Record the average latency for 10,000 frames after the last frame loss
- and continue to record average latency measurements for every 10,000
- frames, when latency returns to within 10% of pre-overload levels record
- the time-stamp.
-
- **Expected Result**:
-
- **Metrics collected**
-
- The following are the metrics collected for this test:
-
- - The length of time it takes the DUT to recover from an overload
- condition.
- - The length of time it takes the DUT to recover the average latency to
- pre-overload conditions.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → physical.
-
-.. 3.2.2.1.5
-
-.. _BackToBackFrames:
-
-Test ID: LTD.Throughput.RFC2544.BackToBackFrames
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC2544 Back To Back Frames Test
-
- **Prerequisite Test**: N
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to characterize the ability of the DUT to
- process back-to-back frames. For each frame size previously defined
- under :ref:`default-test-parameters`, a burst of traffic
- is sent to the DUT with the minimum inter-frame gap between each frame.
- If the number of received frames equals the number of frames that were
- transmitted, the burst size should be increased and traffic is sent to
- the DUT again. The value measured is the back-to-back value, that is the
- maximum burst size the DUT can handle without any frame loss. Please note
- a trial must run for a minimum of 2 seconds and should be repeated 50
- times (at a minimum).
-
- **Expected Result**:
-
- Tests of back-to-back frames with physical devices have produced
- unstable results in some cases. All tests should be repeated in multiple
- test sessions and results stability should be examined.
-
- **Metrics collected**
-
- The following are the metrics collected for this test:
-
- - The average back-to-back value across the trials, which is
- the number of frames in the longest burst that the DUT will
- handle without the loss of any frames.
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → physical.
-
-.. 3.2.2.1.6
-
-Test ID: LTD.Throughput.RFC2889.MaxForwardingRateSoak
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2889 X% packet loss Max Forwarding Rate Soak Test
-
- **Prerequisite Test** LTD.Throughput.RFC2544.PacketLossRatio
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to understand the Max Forwarding Rate stability
- over an extended test duration in order to uncover any outliers. To allow
- for an extended test duration, the test should ideally run for 24 hours
- or, if this is not possible, for at least 6 hours. For this test, each frame
- size must be sent at the highest Throughput rate with X% packet loss, as
- determined in the prerequisite test. The default loss percentages to be
- tested are: - X = 0% - X = 10^-7%
-
- Note: Other values can be tested if required by the user.
-
- **Expected Result**:
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - Max Forwarding Rate stability of the DUT.
-
- - This means reporting the number of packets lost per time interval
- and reporting any time intervals with packet loss. The
- `RFC2889 <https://www.rfc-editor.org/rfc/rfc2289.txt>`__
- Forwarding Rate shall be measured in each interval.
- An interval of 60s is suggested.
-
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
- - The `RFC5481 <https://www.rfc-editor.org/rfc/rfc5481.txt>`__
- PDV form of delay variation on the traffic flow,
- using the 99th percentile.
-
-.. 3.2.2.1.7
-
-Test ID: LTD.Throughput.RFC2889.MaxForwardingRateSoakFrameModification
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2889 Max Forwarding Rate Soak Test with Frame Modification
-
- **Prerequisite Test**:
- LTD.Throughput.RFC2544.PacketLossRatioFrameModification (0% Packet Loss)
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to understand the Max Forwarding Rate stability over an
- extended test duration in order to uncover any outliers. To allow for an
- extended test duration, the test should ideally run for 24 hours or, if
- this is not possible, for at least 6 hour. For this test, each frame
- size must be sent at the highest Throughput rate with 0% packet loss, as
- determined in the prerequisite test.
-
- During this test, the DUT must perform the following operations on the
- traffic flow:
-
- - Perform packet parsing on the DUT's ingress port.
- - Perform any relevant address look-ups on the DUT's ingress ports.
- - Modify the packet header before forwarding the packet to the DUT's
- egress port. Packet modifications include:
-
- - Modifying the Ethernet source or destination MAC address.
- - Modifying/adding a VLAN tag (**Recommended**).
- - Modifying/adding a MPLS tag.
- - Modifying the source or destination ip address.
- - Modifying the TOS/DSCP field.
- - Modifying the source or destination ports for UDP/TCP/SCTP.
- - Modifying the TTL.
-
- **Expected Result**:
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - Max Forwarding Rate stability of the DUT.
-
- - This means reporting the number of packets lost per time interval
- and reporting any time intervals with packet loss. The
- `RFC2889 <https://www.rfc-editor.org/rfc/rfc2289.txt>`__
- Forwarding Rate shall be measured in each interval.
- An interval of 60s is suggested.
-
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
- - The `RFC5481 <https://www.rfc-editor.org/rfc/rfc5481.txt>`__
- PDV form of delay variation on the traffic flow, using the 99th
- percentile.
-
-.. 3.2.2.1.8
-
-Test ID: LTD.Throughput.RFC6201.ResetTime
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 6201 Reset Time Test
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to determine the length of time it takes the DUT
- to recover from a reset.
-
- Two reset methods are defined - planned and unplanned. A planned reset
- requires stopping and restarting the virtual switch by the usual
- 'graceful' method defined by it's documentation. An unplanned reset
- requires simulating a fatal internal fault in the virtual switch - for
- example by using kill -SIGKILL on a Linux environment.
-
- Both reset methods SHOULD be exercised.
-
- For each frame size previously defined under :ref:`default-test-parameters`,
- traffic should be sent to the DUT under
- normal conditions. During the duration of the test and while the traffic
- flows are passing through the DUT, the DUT should be reset and the Reset
- time measured. The Reset time is the total time that a device is
- determined to be out of operation and includes the time to perform the
- reset and the time to recover from it (cf. `RFC6201
- <https://www.rfc-editor.org/rfc/rfc6201.txt>`__).
-
- `RFC6201 <https://www.rfc-editor.org/rfc/rfc6201.txt>`__ defines two methods
- to measure the Reset time:
-
- - Frame-Loss Method: which requires the monitoring of the number of
- lost frames and calculates the Reset time based on the number of
- frames lost and the offered rate according to the following
- formula:
-
- .. code-block:: console
-
- Frames_lost (packets)
- Reset_time = -------------------------------------
- Offered_rate (packets per second)
-
- - Timestamp Method: which measures the time from which the last frame
- is forwarded from the DUT to the time the first frame is forwarded
- after the reset. This involves time-stamping all transmitted frames
- and recording the timestamp of the last frame that was received prior
- to the reset and also measuring the timestamp of the first frame that
- is received after the reset. The Reset time is the difference between
- these two timestamps.
-
- According to `RFC6201 <https://www.rfc-editor.org/rfc/rfc6201.txt>`__ the
- choice of method depends on the test tool's capability; the Frame-Loss
- method SHOULD be used if the test tool supports:
-
- * Counting the number of lost frames per stream.
- * Transmitting test frame despite the physical link status.
-
- whereas the Timestamp method SHOULD be used if the test tool supports:
-
- * Timestamping each frame.
- * Monitoring received frame's timestamp.
- * Transmitting frames only if the physical link status is up.
-
- **Expected Result**:
-
- **Metrics collected**
-
- The following are the metrics collected for this test:
-
- * Average Reset Time over the number of trials performed.
-
- Results of this test should include the following information:
-
- * The reset method used.
- * Throughput in Fps and Mbps.
- * Average Frame Loss over the number of trials performed.
- * Average Reset Time in milliseconds over the number of trials performed.
- * Number of trials performed.
- * Protocol: IPv4, IPv6, MPLS, etc.
- * Frame Size in Octets
- * Port Media: Ethernet, Gigabit Ethernet (GbE), etc.
- * Port Speed: 10 Gbps, 40 Gbps etc.
- * Interface Encapsulation: Ethernet, Ethernet VLAN, etc.
-
- **Deployment scenario**:
-
- * Physical → virtual switch → physical.
-
-.. 3.2.2.1.9
-
-Test ID: LTD.Throughput.RFC2889.MaxForwardingRate
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC2889 Forwarding Rate Test
-
- **Prerequisite Test**: LTD.Throughput.RFC2544.PacketLossRatio
-
- **Priority**:
-
- **Description**:
-
- This test measures the DUT's Max Forwarding Rate when the Offered Load
- is varied between the throughput and the Maximum Offered Load for fixed
- length frames at a fixed time interval. The selected frame sizes are
- those previously defined under :ref:`default-test-parameters`.
- The throughput is the maximum offered
- load with 0% frame loss (measured by the prerequisite test), and the
- Maximum Offered Load (as defined by
- `RFC2285 <https://www.rfc-editor.org/rfc/rfc2285.txt>`__) is *"the highest
- number of frames per second that an external source can transmit to a
- DUT/SUT for forwarding to a specified output interface or interfaces"*.
-
- Traffic should be sent to the DUT at a particular rate (TX rate)
- starting with TX rate equal to the throughput rate. The rate of
- successfully received frames at the destination counted (in FPS). If the
- RX rate is equal to the TX rate, the TX rate should be increased by a
- fixed step size and the RX rate measured again until the Max Forwarding
- Rate is found.
-
- The trial duration for each iteration should last for the period of time
- needed for the system to reach steady state for the frame size being
- tested. Under `RFC2889 <https://www.rfc-editor.org/rfc/rfc2289.txt>`__
- (Sec. 5.6.3.1) test methodology, the test
- duration should run for a minimum period of 30 seconds, regardless
- whether the system reaches steady state before the minimum duration
- ends.
-
- **Expected Result**: According to
- `RFC2889 <https://www.rfc-editor.org/rfc/rfc2289.txt>`__ The Max Forwarding
- Rate is the highest forwarding rate of a DUT taken from an iterative set of
- forwarding rate measurements. The iterative set of forwarding rate measurements
- are made by setting the intended load transmitted from an external source and
- measuring the offered load (i.e what the DUT is capable of forwarding). If the
- Throughput == the Maximum Offered Load, it follows that Max Forwarding Rate is
- equal to the Maximum Offered Load.
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The Max Forwarding Rate for the DUT for each packet size.
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → physical. Note: Full mesh tests with
- multiple ingress and egress ports are a key aspect of RFC 2889
- benchmarks, and scenarios with both 2 and 4 ports should be tested.
- In any case, the number of ports used must be reported.
-
-.. 3.2.2.1.10
-
-Test ID: LTD.Throughput.RFC2889.ForwardPressure
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC2889 Forward Pressure Test
-
- **Prerequisite Test**: LTD.Throughput.RFC2889.MaxForwardingRate
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to determine if the DUT transmits frames with an
- inter-frame gap that is less than 12 bytes. This test overloads the DUT
- and measures the output for forward pressure. Traffic should be
- transmitted to the DUT with an inter-frame gap of 11 bytes, this will
- overload the DUT by 1 byte per frame. The forwarding rate of the DUT
- should be measured.
-
- **Expected Result**: The forwarding rate should not exceed the maximum
- forwarding rate of the DUT collected by
- LTD.Throughput.RFC2889.MaxForwardingRate.
-
- **Metrics collected**
-
- The following are the metrics collected for this test:
-
- - Forwarding rate of the DUT in FPS or Mbps.
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → physical.
-
-.. 3.2.2.1.11
-
-Test ID: LTD.Throughput.RFC2889.ErrorFramesFiltering
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC2889 Error Frames Filtering Test
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to determine whether the DUT will propagate any
- erroneous frames it receives or whether it is capable of filtering out
- the erroneous frames. Traffic should be sent with erroneous frames
- included within the flow at random intervals. Illegal frames that must
- be tested include: - Oversize Frames. - Undersize Frames. - CRC Errored
- Frames. - Dribble Bit Errored Frames - Alignment Errored Frames
-
- The traffic flow exiting the DUT should be recorded and checked to
- determine if the erroneous frames where passed through the DUT.
-
- **Expected Result**: Broken frames are not passed!
-
- **Metrics collected**
-
- No Metrics are collected in this test, instead it determines:
-
- - Whether the DUT will propagate erroneous frames.
- - Or whether the DUT will correctly filter out any erroneous frames
- from traffic flow with out removing correct frames.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → physical.
-
-.. 3.2.2.1.12
-
-Test ID: LTD.Throughput.RFC2889.BroadcastFrameForwarding
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC2889 Broadcast Frame Forwarding Test
-
- **Prerequisite Test**: N
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to determine the maximum forwarding rate of the
- DUT when forwarding broadcast traffic. For each frame previously defined
- under :ref:`default-test-parameters`, the traffic should
- be set up as broadcast traffic. The traffic throughput of the DUT should
- be measured.
-
- The test should be conducted with at least 4 physical ports on the DUT.
- The number of ports used MUST be recorded.
-
- As broadcast involves forwarding a single incoming packet to several
- destinations, the latency of a single packet is defined as the average
- of the latencies for each of the broadcast destinations.
-
- The incoming packet is transmitted on each of the other physical ports,
- it is not transmitted on the port on which it was received. The test MAY
- be conducted using different broadcasting ports to uncover any
- performance differences.
-
- **Expected Result**:
-
- **Metrics collected**:
-
- The following are the metrics collected for this test:
-
- - The forwarding rate of the DUT when forwarding broadcast traffic.
- - The minimum, average & maximum packets latencies observed.
-
- **Deployment scenario**:
-
- - Physical → virtual switch 3x physical. In the Broadcast rate testing,
- four test ports are required. One of the ports is connected to the test
- device, so it can send broadcast frames and listen for miss-routed frames.
-
-.. 3.2.2.1.13
-
-Test ID: LTD.Throughput.RFC2544.WorstN-BestN
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: Modified RFC 2544 X% packet loss ratio Throughput and Latency Test
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- This test determines the DUT's maximum forwarding rate with X% traffic
- loss for a constant load (fixed length frames at a fixed interval time).
- The default loss percentages to be tested are: X = 0%, X = 10^-7%
-
- Modified RFC 2544 throughput benchmarking methodology aims to quantify
- the throughput measurement variations observed during standard RFC 2544
- benchmarking measurements of virtual switches and VNFs. The RFC2544
- binary search algorithm is modified to use more samples per test trial
- to drive the binary search and yield statistically more meaningful
- results. This keeps the heart of the RFC2544 methodology, still relying
- on the binary search of throughput at specified loss tolerance, while
- providing more useful information about the range of results seen in
- testing. Instead of using a single traffic trial per iteration step,
- each traffic trial is repeated N times and the success/failure of the
- iteration step is based on these N traffic trials. Two types of revised
- tests are defined - *Worst-of-N* and *Best-of-N*.
-
- **Worst-of-N**
-
- *Worst-of-N* indicates the lowest expected maximum throughput for (
- packet size, loss tolerance) when repeating the test.
-
- 1. Repeat the same test run N times at a set packet rate, record each
- result.
- 2. Take the WORST result (highest packet loss) out of N result samples,
- called the Worst-of-N sample.
- 3. If Worst-of-N sample has loss less than the set loss tolerance, then
- the step is successful - increase the test traffic rate.
- 4. If Worst-of-N sample has loss greater than the set loss tolerance
- then the step failed - decrease the test traffic rate.
- 5. Go to step 1.
-
- **Best-of-N**
-
- *Best-of-N* indicates the highest expected maximum throughput for (
- packet size, loss tolerance) when repeating the test.
-
- 1. Repeat the same traffic run N times at a set packet rate, record
- each result.
- 2. Take the BEST result (least packet loss) out of N result samples,
- called the Best-of-N sample.
- 3. If Best-of-N sample has loss less than the set loss tolerance, then
- the step is successful - increase the test traffic rate.
- 4. If Best-of-N sample has loss greater than the set loss tolerance,
- then the step failed - decrease the test traffic rate.
- 5. Go to step 1.
-
- Performing both Worst-of-N and Best-of-N benchmark tests yields lower
- and upper bounds of expected maximum throughput under the operating
- conditions, giving a very good indication to the user of the
- deterministic performance range for the tested setup.
-
- **Expected Result**: At the end of each trial series, the presence or
- absence of loss determines the modification of offered load for the
- next trial series, converging on a maximum rate, or
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__ Throughput
- with X% loss.
- The Throughput load is re-used in related
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__ tests and other
- tests.
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The maximum forwarding rate in Frames Per Second (FPS) and Mbps of
- the DUT for each frame size with X% packet loss.
- - The average latency of the traffic flow when passing through the DUT
- (if testing for latency, note that this average is different from the
- test specified in Section 26.3 of
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__).
- - Following may also be collected as part of this test, to determine
- the vSwitch's performance footprint on the system:
-
- - CPU core utilization.
- - CPU cache utilization.
- - Memory footprint.
- - System bus (QPI, PCI, ...) utilization.
- - CPU cycles consumed per packet.
-
-.. 3.2.2.1.14
-
-Test ID: LTD.Throughput.Overlay.Network.<tech>.RFC2544.PacketLossRatio
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: <tech> Overlay Network RFC 2544 X% packet loss ratio Throughput and Latency Test
-
-
- NOTE: Throughout this test, four interchangeable overlay technologies are covered by the
- same test description. They are: VXLAN, GRE, NVGRE and GENEVE.
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
- This test evaluates standard switch performance benchmarks for the scenario where an
- Overlay Network is deployed for all paths through the vSwitch. Overlay Technologies covered
- (replacing <tech> in the test name) include:
-
- - VXLAN
- - GRE
- - NVGRE
- - GENEVE
-
- Performance will be assessed for each of the following overlay network functions:
-
- - Encapsulation only
- - De-encapsulation only
- - Both Encapsulation and De-encapsulation
-
- For each native packet, the DUT must perform the following operations:
-
- - Examine the packet and classify its correct overlay net (tunnel) assignment
- - Encapsulate the packet
- - Switch the packet to the correct port
-
- For each encapsulated packet, the DUT must perform the following operations:
-
- - Examine the packet and classify its correct native network assignment
- - De-encapsulate the packet, if required
- - Switch the packet to the correct port
-
- The selected frame sizes are those previously defined under
- :ref:`default-test-parameters`.
-
- Thus, each test comprises an overlay technology, a network function,
- and a packet size *with* overlay network overhead included
- (but see also the discussion at
- https://etherpad.opnfv.org/p/vSwitchTestsDrafts ).
-
- The test can also be used to determine the average latency of the traffic.
-
- Under the `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__
- test methodology, the test duration will
- include a number of trials; each trial should run for a minimum period
- of 60 seconds. A binary search methodology must be applied for each
- trial to obtain the final result for Throughput.
-
- **Expected Result**: At the end of each trial, the presence or absence
- of loss determines the modification of offered load for the next trial,
- converging on a maximum rate, or
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__ Throughput with X%
- loss (where the value of X is typically equal to zero).
- The Throughput load is re-used in related
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__ tests and other
- tests.
-
- **Metrics Collected**:
- The following are the metrics collected for this test:
-
- - The maximum Throughput in Frames Per Second (FPS) and Mbps of
- the DUT for each frame size with X% packet loss.
- - The average latency of the traffic flow when passing through the DUT
- and VNFs (if testing for latency, note that this average is different from the
- test specified in Section 26.3 of
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__).
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
-.. 3.2.3.1.15
-
-Test ID: LTD.Throughput.RFC2544.MatchAction.PacketLossRatio
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2544 X% packet loss ratio match action Throughput and Latency Test
-
- **Prerequisite Test**: LTD.Throughput.RFC2544.PacketLossRatio
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to determine the cost of carrying out match
- action(s) on the DUT’s RFC2544 Throughput with X% traffic loss for
- a constant load (fixed length frames at a fixed interval time).
-
- Each test case requires:
-
- * selection of a specific match action(s),
- * specifying a percentage of total traffic that is elligible
- for the match action,
- * determination of the specific test configuration (number
- of flows, number of test ports, presence of an external
- controller, etc.), and
- * measurement of the RFC 2544 Throughput level with X% packet
- loss: Traffic shall be bi-directional and symmetric.
-
- Note: It would be ideal to verify that all match action-elligible
- traffic was forwarded to the correct port, and if forwarded to
- an unintended port it should be considered lost.
-
- A match action is an action that is typically carried on a frame
- or packet that matches a set of flow classification parameters
- (typically frame/packet header fields). A match action may or may
- not modify a packet/frame. Match actions include [1]:
-
- * output : outputs a packet to a particular port.
- * normal: Subjects the packet to traditional L2/L3 processing
- (MAC learning).
- * flood: Outputs the packet on all switch physical ports
- other than the port on which it was received and any ports
- on which flooding is disabled.
- * all: Outputs the packet on all switch physical ports other
- than the port on which it was received.
- * local: Outputs the packet on the ``local port``, which
- corresponds to the network device that has the same name as
- the bridge.
- * in_port: Outputs the packet on the port from which it was
- received.
- * Controller: Sends the packet and its metadata to the
- OpenFlow controller as a ``packet in`` message.
- * enqueue: Enqueues the packet on the specified queue
- within port.
- * drop: discard the packet.
-
- Modifications include [1]:
-
- * mod vlan: covered by LTD.Throughput.RFC2544.PacketLossRatioFrameModification
- * mod_dl_src: Sets the source Ethernet address.
- * mod_dl_dst: Sets the destination Ethernet address.
- * mod_nw_src: Sets the IPv4 source address.
- * mod_nw_dst: Sets the IPv4 destination address.
- * mod_tp_src: Sets the TCP or UDP or SCTP source port.
- * mod_tp_dst: Sets the TCP or UDP or SCTP destination port.
- * mod_nw_tos: Sets the DSCP bits in the IPv4 ToS/DSCP or
- IPv6 traffic class field.
- * mod_nw_ecn: Sets the ECN bits in the appropriate IPv4 or
- IPv6 field.
- * mod_nw_ttl: Sets the IPv4 TTL or IPv6 hop limit field.
-
- Note: This comprehensive list requires extensive traffic generator
- capabilities.
-
- The match action(s) that were applied as part of the test should be
- reported in the final test report.
-
- During this test, the DUT must perform the following operations on
- the traffic flow:
-
- * Perform packet parsing on the DUT’s ingress port.
- * Perform any relevant address look-ups on the DUT’s ingress
- ports.
- * Carry out one or more of the match actions specified above.
-
- The default loss percentages to be tested are: - X = 0% - X = 10^-7%
- Other values can be tested if required by the user. The selected
- frame sizes are those previously defined under
- :ref:`default-test-parameters`.
-
- The test can also be used to determine the average latency of the
- traffic when a match action is applied to packets in a flow. Under
- the RFC2544 test methodology, the test duration will include a
- number of trials; each trial should run for a minimum period of 60
- seconds. A binary search methodology must be applied for each
- trial to obtain the final result.
-
- **Expected Result:**
-
- At the end of each trial, the presence or absence of loss
- determines the modification of offered load for the next trial,
- converging on a maximum rate, or RFC2544Throughput with X% loss.
- The Throughput load is re-used in related RFC2544 tests and other
- tests.
-
- **Metrics Collected:**
-
- The following are the metrics collected for this test:
-
- * The RFC 2544 Throughput in Frames Per Second (FPS) and Mbps
- of the DUT for each frame size with X% packet loss.
- * The average latency of the traffic flow when passing through
- the DUT (if testing for latency, note that this average is
- different from the test specified in Section 26.3 ofRFC2544).
- * CPU and memory utilization may also be collected as part of
- this test, to determine the vSwitch’s performance footprint
- on the system.
-
- The metrics collected can be compared to that of the prerequisite
- test to determine the cost of the match action(s) in the pipeline.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → physical (and others are possible)
-
- [1] ovs-ofctl - administer OpenFlow switches
- [http://openvswitch.org/support/dist-docs/ovs-ofctl.8.txt ]
-
-
-.. 3.2.2.2
-
-Packet Latency tests
---------------------
-
-These tests will measure the store and forward latency as well as the packet
-delay variation for various packet types through the virtual switch. The
-following list is not exhaustive but should indicate the type of tests
-that should be required. It is expected that more will be added.
-
-.. 3.2.2.2.1
-
-Test ID: LTD.PacketLatency.InitialPacketProcessingLatency
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: Initial Packet Processing Latency
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- In some virtual switch architectures, the first packets of a flow will
- take the system longer to process than subsequent packets in the flow.
- This test determines the latency for these packets. The test will
- measure the latency of the packets as they are processed by the
- flow-setup-path of the DUT. There are two methods for this test, a
- recommended method and a nalternative method that can be used if it is
- possible to disable the fastpath of the virtual switch.
-
- Recommended method: This test will send 64,000 packets to the DUT, each
- belonging to a different flow. Average packet latency will be determined
- over the 64,000 packets.
-
- Alternative method: This test will send a single packet to the DUT after
- a fixed interval of time. The time interval will be equivalent to the
- amount of time it takes for a flow to time out in the virtual switch
- plus 10%. Average packet latency will be determined over 1,000,000
- packets.
-
- This test is intended only for non-learning virtual switches; For learning
- virtual switches use RFC2889.
-
- For this test, only unidirectional traffic is required.
-
- **Expected Result**: The average latency for the initial packet of all
- flows should be greater than the latency of subsequent traffic.
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - Average latency of the initial packets of all flows that are
- processed by the DUT.
-
- **Deployment scenario**:
-
- - Physical → Virtual Switch → Physical.
-
-.. 3.2.2.2.2
-
-Test ID: LTD.PacketDelayVariation.RFC3393.Soak
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: Packet Delay Variation Soak Test
-
- **Prerequisite Tests**: LTD.Throughput.RFC2544.PacketLossRatio (0% Packet Loss)
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to understand the distribution of packet delay
- variation for different frame sizes over an extended test duration and
- to determine if there are any outliers. To allow for an extended test
- duration, the test should ideally run for 24 hours or, if this is not
- possible, for at least 6 hour. For this test, each frame size must be
- sent at the highest possible throughput with 0% packet loss, as
- determined in the prerequisite test.
-
- **Expected Result**:
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The packet delay variation value for traffic passing through the DUT.
- - The `RFC5481 <https://www.rfc-editor.org/rfc/rfc5481.txt>`__
- PDV form of delay variation on the traffic flow,
- using the 99th percentile, for each 60s interval during the test.
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
-.. 3.2.2.3
-
-Scalability tests
------------------
-
-The general aim of these tests is to understand the impact of large flow
-table size and flow lookups on throughput. The following list is not
-exhaustive but should indicate the type of tests that should be required.
-It is expected that more will be added.
-
-.. 3.2.2.3.1
-
-.. _Scalability0PacketLoss:
-
-Test ID: LTD.Scalability.Flows.RFC2544.0PacketLoss
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2544 0% loss Flow Scalability throughput test
-
- **Prerequisite Test**: LTD.Throughput.RFC2544.PacketLossRatio, IF the
- delta Throughput between the single-flow RFC2544 test and this test with
- a variable number of flows is desired.
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to measure how throughput changes as the number
- of flows in the DUT increases. The test will measure the throughput
- through the fastpath, as such the flows need to be installed on the DUT
- before passing traffic.
-
- For each frame size previously defined under :ref:`default-test-parameters`
- and for each of the following number of flows:
-
- - 1,000
- - 2,000
- - 4,000
- - 8,000
- - 16,000
- - 32,000
- - 64,000
- - Max supported number of flows.
-
- This test will be conducted under two conditions following the
- establishment of all flows as required by RFC 2544, regarding the flow
- expiration time-out:
-
- 1) The time-out never expires during each trial.
-
- 2) The time-out expires for all flows periodically. This would require a
- short time-out compared with flow re-appearance for a small number of
- flows, and may not be possible for all flow conditions.
-
- The maximum 0% packet loss Throughput should be determined in a manner
- identical to LTD.Throughput.RFC2544.PacketLossRatio.
-
- **Expected Result**:
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The maximum number of frames per second that can be forwarded at the
- specified number of flows and the specified frame size, with zero
- packet loss.
-
-.. 3.2.2.3.2
-
-Test ID: LTD.MemoryBandwidth.RFC2544.0PacketLoss.Scalability
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2544 0% loss Memory Bandwidth Scalability test
-
- **Prerequisite Tests**: LTD.Throughput.RFC2544.PacketLossRatio, IF the
- delta Throughput between an undisturbed RFC2544 test and this test with
- the Throughput affected by cache and memory bandwidth contention is desired.
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to understand how the DUT's performance is
- affected by cache sharing and memory bandwidth between processes.
-
- During the test all cores not used by the vSwitch should be running a
- memory intensive application. This application should read and write
- random data to random addresses in unused physical memory. The random
- nature of the data and addresses is intended to consume cache, exercise
- main memory access (as opposed to cache) and exercise all memory buses
- equally. Furthermore:
-
- - the ratio of reads to writes should be recorded. A ratio of 1:1
- SHOULD be used.
- - the reads and writes MUST be of cache-line size and be cache-line aligned.
- - in NUMA architectures memory access SHOULD be local to the core's node.
- Whether only local memory or a mix of local and remote memory is used
- MUST be recorded.
- - the memory bandwidth (reads plus writes) used per-core MUST be recorded;
- the test MUST be run with a per-core memory bandwidth equal to half the
- maximum system memory bandwidth divided by the number of cores. The test
- MAY be run with other values for the per-core memory bandwidth.
- - the test MAY also be run with the memory intensive application running
- on all cores.
-
- Under these conditions the DUT's 0% packet loss throughput is determined
- as per LTD.Throughput.RFC2544.PacketLossRatio.
-
- **Expected Result**:
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The DUT's 0% packet loss throughput in the presence of cache sharing and
- memory bandwidth between processes.
-
-.. 3.2.2.3.3
-
-Test ID: LTD.Scalability.VNF.RFC2544.PacketLossRatio
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: VNF Scalability RFC 2544 X% packet loss ratio Throughput and
- Latency Test
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- This test determines the DUT's throughput rate with X% traffic loss for
- a constant load (fixed length frames at a fixed interval time) when the
- number of VNFs on the DUT increases. The default loss percentages
- to be tested are: - X = 0% - X = 10^-7% . The minimum number of
- VNFs to be tested are 3.
-
- Flow classification should be conducted with L2, L3 and L4 matching
- to understand the matching and scaling capability of the vSwitch. The
- matching fields which were used as part of the test should be reported
- as part of the benchmark report.
-
- The vSwitch is responsible for forwarding frames between the VNFs
-
- The SUT (vSwitch and VNF daisy chain) operation should be validated
- before running the test. This may be completed by running a burst or
- continuous stream of traffic through the SUT to ensure proper operation
- before a test.
-
- **Note**: The traffic rate used to validate SUT operation should be low
- enough not to stress the SUT.
-
- **Note**: Other values can be tested if required by the user.
-
- **Note**: The same VNF should be used in the "daisy chain" formation.
- Each addition of a VNF should be conducted in a new test setup (The DUT
- is brought down, then the DUT is brought up again). An atlernative approach
- would be to continue to add VNFs without bringing down the DUT. The
- approach used needs to be documented as part of the test report.
-
- The selected frame sizes are those previously defined under
- :ref:`default-test-parameters`.
- The test can also be used to determine the average latency of the traffic.
-
- Under the `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__
- test methodology, the test duration will
- include a number of trials; each trial should run for a minimum period
- of 60 seconds. A binary search methodology must be applied for each
- trial to obtain the final result for Throughput.
-
- **Expected Result**: At the end of each trial, the presence or absence
- of loss determines the modification of offered load for the next trial,
- converging on a maximum rate, or
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__ Throughput with X%
- loss.
- The Throughput load is re-used in related
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__ tests and other
- tests.
-
- If the test VNFs are rather light-weight in terms of processing, the test
- provides a view of multiple passes through the vswitch on logical
- interfaces. In other words, the test produces an optimistic count of
- daisy-chained VNFs, but the cumulative effect of traffic on the vSwitch is
- "real" (assuming that the vSwitch has some dedicated resources, and the
- effects on shared resources is understood).
-
-
- **Metrics Collected**:
- The following are the metrics collected for this test:
-
- - The maximum Throughput in Frames Per Second (FPS) and Mbps of
- the DUT for each frame size with X% packet loss.
- - The average latency of the traffic flow when passing through the DUT
- and VNFs (if testing for latency, note that this average is different from the
- test specified in Section 26.3 of
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__).
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
-.. 3.2.2.3.4
-
-Test ID: LTD.Scalability.VNF.RFC2544.PacketLossProfile
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: VNF Scalability RFC 2544 Throughput and Latency Profile
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- This test reveals how throughput and latency degrades as the number
- of VNFs increases and offered rate varies in the region of the DUT's
- maximum forwarding rate as determined by
- LTD.Throughput.RFC2544.PacketLossRatio (0% Packet Loss).
- For example it can be used to determine if the degradation of throughput
- and latency as the number of VNFs and offered rate increases is slow
- and graceful, or sudden and severe. The minimum number of VNFs to
- be tested is 3.
-
- The selected frame sizes are those previously defined under
- :ref:`default-test-parameters`.
-
- The offered traffic rate is described as a percentage delta with respect
- to the DUT's RFC 2544 Throughput as determined by
- LTD.Throughput.RFC2544.PacketLoss Ratio (0% Packet Loss case). A delta
- of 0% is equivalent to an offered traffic rate equal to the RFC 2544
- Throughput; A delta of +50% indicates an offered rate half-way
- between the Throughput and line-rate, whereas a delta of
- -50% indicates an offered rate of half the maximum rate. Therefore the
- range of the delta figure is natuarlly bounded at -100% (zero offered
- traffic) and +100% (traffic offered at line rate).
-
- The following deltas to the maximum forwarding rate should be applied:
-
- - -50%, -10%, 0%, +10% & +50%
-
- **Note**: Other values can be tested if required by the user.
-
- **Note**: The same VNF should be used in the "daisy chain" formation.
- Each addition of a VNF should be conducted in a new test setup (The DUT
- is brought down, then the DUT is brought up again). An atlernative approach
- would be to continue to add VNFs without bringing down the DUT. The
- approach used needs to be documented as part of the test report.
-
- Flow classification should be conducted with L2, L3 and L4 matching
- to understand the matching and scaling capability of the vSwitch. The
- matching fields which were used as part of the test should be reported
- as part of the benchmark report.
-
- The SUT (vSwitch and VNF daisy chain) operation should be validated
- before running the test. This may be completed by running a burst or
- continuous stream of traffic through the SUT to ensure proper operation
- before a test.
-
- **Note**: the traffic rate used to validate SUT operation should be low
- enough not to stress the SUT
-
- **Expected Result**: For each packet size a profile should be produced
- of how throughput and latency vary with offered rate.
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The forwarding rate in Frames Per Second (FPS) and Mbps of the DUT
- for each delta to the maximum forwarding rate and for each frame
- size.
- - The average latency for each delta to the maximum forwarding rate and
- for each frame size.
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
- - Any failures experienced (for example if the vSwitch crashes, stops
- processing packets, restarts or becomes unresponsive to commands)
- when the offered load is above Maximum Throughput MUST be recorded
- and reported with the results.
-
-.. 3.2.2.4
-
-Activation tests
-----------------
-
-The general aim of these tests is to understand the capacity of the
-and speed with which the vswitch can accommodate new flows.
-
-.. 3.2.2.4.1
-
-Test ID: LTD.Activation.RFC2889.AddressCachingCapacity
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC2889 Address Caching Capacity Test
-
- **Prerequisite Test**: N/A
-
- **Priority**:
-
- **Description**:
-
- Please note this test is only applicable to virtual switches that are capable of
- MAC learning. The aim of this test is to determine the address caching
- capacity of the DUT for a constant load (fixed length frames at a fixed
- interval time). The selected frame sizes are those previously defined
- under :ref:`default-test-parameters`.
-
- In order to run this test the aging time, that is the maximum time the
- DUT will keep a learned address in its flow table, and a set of initial
- addresses, whose value should be >= 1 and <= the max number supported by
- the implementation must be known. Please note that if the aging time is
- configurable it must be longer than the time necessary to produce frames
- from the external source at the specified rate. If the aging time is
- fixed the frame rate must be brought down to a value that the external
- source can produce in a time that is less than the aging time.
-
- Learning Frames should be sent from an external source to the DUT to
- install a number of flows. The Learning Frames must have a fixed
- destination address and must vary the source address of the frames. The
- DUT should install flows in its flow table based on the varying source
- addresses. Frames should then be transmitted from an external source at
- a suitable frame rate to see if the DUT has properly learned all of the
- addresses. If there is no frame loss and no flooding, the number of
- addresses sent to the DUT should be increased and the test is repeated
- until the max number of cached addresses supported by the DUT
- determined.
-
- **Expected Result**:
-
- **Metrics collected**:
-
- The following are the metrics collected for this test:
-
- - Number of cached addresses supported by the DUT.
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → 2 x physical (one receiving, one listening).
-
-.. 3.2.2.4.2
-
-Test ID: LTD.Activation.RFC2889.AddressLearningRate
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC2889 Address Learning Rate Test
-
- **Prerequisite Test**: LTD.Memory.RFC2889.AddressCachingCapacity
-
- **Priority**:
-
- **Description**:
-
- Please note this test is only applicable to virtual switches that are capable of
- MAC learning. The aim of this test is to determine the rate of address
- learning of the DUT for a constant load (fixed length frames at a fixed
- interval time). The selected frame sizes are those previously defined
- under :ref:`default-test-parameters`, traffic should be
- sent with each IPv4/IPv6 address incremented by one. The rate at which
- the DUT learns a new address should be measured. The maximum caching
- capacity from LTD.Memory.RFC2889.AddressCachingCapacity should be taken
- into consideration as the maximum number of addresses for which the
- learning rate can be obtained.
-
- **Expected Result**: It may be worthwhile to report the behaviour when
- operating beyond address capacity - some DUTs may be more friendly to
- new addresses than others.
-
- **Metrics collected**:
-
- The following are the metrics collected for this test:
-
- - The address learning rate of the DUT.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → 2 x physical (one receiving, one listening).
-
-.. 3.2.2.5
-
-Coupling between control path and datapath Tests
-------------------------------------------------
-
-The following tests aim to determine how tightly coupled the datapath
-and the control path are within a virtual switch. The following list
-is not exhaustive but should indicate the type of tests that should be
-required. It is expected that more will be added.
-
-.. 3.2.2.5.1
-
-Test ID: LTD.CPDPCouplingFlowAddition
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: Control Path and Datapath Coupling
-
- **Prerequisite Test**:
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to understand how exercising the DUT's control
- path affects datapath performance.
-
- Initially a certain number of flow table entries are installed in the
- vSwitch. Then over the duration of an RFC2544 throughput test
- flow-entries are added and removed at the rates specified below. No
- traffic is 'hitting' these flow-entries, they are simply added and
- removed.
-
- The test MUST be repeated with the following initial number of
- flow-entries installed: - < 10 - 1000 - 100,000 - 10,000,000 (or the
- maximum supported number of flow-entries)
-
- The test MUST be repeated with the following rates of flow-entry
- addition and deletion per second: - 0 - 1 (i.e. 1 addition plus 1
- deletion) - 100 - 10,000
-
- **Expected Result**:
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - The maximum forwarding rate in Frames Per Second (FPS) and Mbps of
- the DUT.
- - The average latency of the traffic flow when passing through the DUT
- (if testing for latency, note that this average is different from the
- test specified in Section 26.3 of
- `RFC2544 <https://www.rfc-editor.org/rfc/rfc2544.txt>`__).
- - CPU and memory utilization may also be collected as part of this
- test, to determine the vSwitch's performance footprint on the system.
-
- **Deployment scenario**:
-
- - Physical → virtual switch → physical.
-
-.. 3.2.2.6
-
-CPU and memory consumption
---------------------------
-
-The following tests will profile a virtual switch's CPU and memory
-utilization under various loads and circumstances. The following
-list is not exhaustive but should indicate the type of tests that
-should be required. It is expected that more will be added.
-
-.. 3.2.2.6.1
-
-.. _CPU0PacketLoss:
-
-Test ID: LTD.Stress.RFC2544.0PacketLoss
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
- **Title**: RFC 2544 0% Loss CPU OR Memory Stress Test
-
- **Prerequisite Test**:
-
- **Priority**:
-
- **Description**:
-
- The aim of this test is to understand the overall performance of the
- system when a CPU or Memory intensive application is run on the same DUT as
- the Virtual Switch. For each frame size, an
- LTD.Throughput.RFC2544.PacketLossRatio (0% Packet Loss) test should be
- performed. Throughout the entire test a CPU or Memory intensive application
- should be run on all cores on the system not in use by the Virtual Switch.
- For NUMA system only cores on the same NUMA node are loaded.
-
- It is recommended that stress-ng be used for loading the non-Virtual
- Switch cores but any stress tool MAY be used.
-
- **Expected Result**:
-
- **Metrics Collected**:
-
- The following are the metrics collected for this test:
-
- - Memory and CPU utilization of the cores running the Virtual Switch.
- - The number of identity of the cores allocated to the Virtual Switch.
- - The configuration of the stress tool (for example the command line
- parameters used to start it.)
-
- **Note:** Stress in the test ID can be replaced with the name of the
- component being stressed, when reporting the results:
- LTD.CPU.RFC2544.0PacketLoss or LTD.Memory.RFC2544.0PacketLoss
-
-.. 3.2.2.7
-
-Summary List of Tests
----------------------
-
-1. Throughput tests
-
- - Test ID: LTD.Throughput.RFC2544.PacketLossRatio
- - Test ID: LTD.Throughput.RFC2544.PacketLossRatioFrameModification
- - Test ID: LTD.Throughput.RFC2544.Profile
- - Test ID: LTD.Throughput.RFC2544.SystemRecoveryTime
- - Test ID: LTD.Throughput.RFC2544.BackToBackFrames
- - Test ID: LTD.Throughput.RFC2889.Soak
- - Test ID: LTD.Throughput.RFC2889.SoakFrameModification
- - Test ID: LTD.Throughput.RFC6201.ResetTime
- - Test ID: LTD.Throughput.RFC2889.MaxForwardingRate
- - Test ID: LTD.Throughput.RFC2889.ForwardPressure
- - Test ID: LTD.Throughput.RFC2889.ErrorFramesFiltering
- - Test ID: LTD.Throughput.RFC2889.BroadcastFrameForwarding
- - Test ID: LTD.Throughput.RFC2544.WorstN-BestN
- - Test ID: LTD.Throughput.Overlay.Network.<tech>.RFC2544.PacketLossRatio
-
-2. Packet Latency tests
-
- - Test ID: LTD.PacketLatency.InitialPacketProcessingLatency
- - Test ID: LTD.PacketDelayVariation.RFC3393.Soak
-
-3. Scalability tests
-
- - Test ID: LTD.Scalability.Flows.RFC2544.0PacketLoss
- - Test ID: LTD.MemoryBandwidth.RFC2544.0PacketLoss.Scalability
- - LTD.Scalability.VNF.RFC2544.PacketLossProfile
- - LTD.Scalability.VNF.RFC2544.PacketLossRatio
-
-4. Activation tests
-
- - Test ID: LTD.Activation.RFC2889.AddressCachingCapacity
- - Test ID: LTD.Activation.RFC2889.AddressLearningRate
-
-5. Coupling between control path and datapath Tests
-
- - Test ID: LTD.CPDPCouplingFlowAddition
-
-6. CPU and memory consumption
-
- - Test ID: LTD.Stress.RFC2544.0PacketLoss
diff --git a/docs/testing/developer/requirements/vswitchperf_ltp.rst b/docs/testing/developer/requirements/vswitchperf_ltp.rst
deleted file mode 100644
index 2b74d676..00000000
--- a/docs/testing/developer/requirements/vswitchperf_ltp.rst
+++ /dev/null
@@ -1,1348 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-.. 3.1
-
-*****************************
-VSPERF LEVEL TEST PLAN (LTP)
-*****************************
-
-===============
-Introduction
-===============
-
-The objective of the OPNFV project titled
-**Characterize vSwitch Performance for Telco NFV Use Cases**, is to
-evaluate the performance of virtual switches to identify its suitability for a
-Telco Network Function Virtualization (NFV) environment. The intention of this
-Level Test Plan (LTP) document is to specify the scope, approach, resources,
-and schedule of the virtual switch performance benchmarking activities in
-OPNFV. The test cases will be identified in a separate document called the
-Level Test Design (LTD) document.
-
-This document is currently in draft form.
-
-.. 3.1.1
-
-
-.. _doc-id:
-
-Document identifier
-=========================
-
-The document id will be used to uniquely identify versions of the LTP. The
-format for the document id will be: OPNFV\_vswitchperf\_LTP\_REL\_STATUS, where
-by the status is one of: draft, reviewed, corrected or final. The document id
-for this version of the LTP is: OPNFV\_vswitchperf\_LTP\_Colorado\_REVIEWED.
-
-.. 3.1.2
-
-.. _scope:
-
-Scope
-==========
-
-The main purpose of this project is to specify a suite of
-performance tests in order to objectively measure the current packet
-transfer characteristics of a virtual switch in the NFVI. The intent of
-the project is to facilitate the performance testing of any virtual switch.
-Thus, a generic suite of tests shall be developed, with no hard dependencies to
-a single implementation. In addition, the test case suite shall be
-architecture independent.
-
-The test cases developed in this project shall not form part of a
-separate test framework, all of these tests may be inserted into the
-Continuous Integration Test Framework and/or the Platform Functionality
-Test Framework - if a vSwitch becomes a standard component of an OPNFV
-release.
-
-.. 3.1.3
-
-References
-===============
-
-* `RFC 1242 Benchmarking Terminology for Network Interconnection
- Devices <http://www.ietf.org/rfc/rfc1242.txt>`__
-* `RFC 2544 Benchmarking Methodology for Network Interconnect
- Devices <http://www.ietf.org/rfc/rfc2544.txt>`__
-* `RFC 2285 Benchmarking Terminology for LAN Switching
- Devices <http://www.ietf.org/rfc/rfc2285.txt>`__
-* `RFC 2889 Benchmarking Methodology for LAN Switching
- Devices <http://www.ietf.org/rfc/rfc2889.txt>`__
-* `RFC 3918 Methodology for IP Multicast
- Benchmarking <http://www.ietf.org/rfc/rfc3918.txt>`__
-* `RFC 4737 Packet Reordering
- Metrics <http://www.ietf.org/rfc/rfc4737.txt>`__
-* `RFC 5481 Packet Delay Variation Applicability
- Statement <http://www.ietf.org/rfc/rfc5481.txt>`__
-* `RFC 6201 Device Reset
- Characterization <http://tools.ietf.org/html/rfc6201>`__
-
-.. 3.1.4
-
-Level in the overall sequence
-===============================
-The level of testing conducted by vswitchperf in the overall testing sequence (among
-all the testing projects in OPNFV) is the performance benchmarking of a
-specific component (the vswitch) in the OPNFV platfrom. It's expected that this
-testing will follow on from the functional and integration testing conducted by
-other testing projects in OPNFV, namely Functest and Yardstick.
-
-.. 3.1.5
-
-Test classes and overall test conditions
-=========================================
-A benchmark is defined by the IETF as: A standardized test that serves as a
-basis for performance evaluation and comparison. It's important to note that
-benchmarks are not Functional tests. They do not provide PASS/FAIL criteria,
-and most importantly ARE NOT performed on live networks, or performed with live
-network traffic.
-
-In order to determine the packet transfer characteristics of a virtual switch,
-the benchmarking tests will be broken down into the following categories:
-
-- **Throughput Tests** to measure the maximum forwarding rate (in
- frames per second or fps) and bit rate (in Mbps) for a constant load
- (as defined by `RFC1242 <https://www.rfc-editor.org/rfc/rfc1242.txt>`__)
- without traffic loss.
-- **Packet and Frame Delay Tests** to measure average, min and max
- packet and frame delay for constant loads.
-- **Stream Performance Tests** (TCP, UDP) to measure bulk data transfer
- performance, i.e. how fast systems can send and receive data through
- the virtual switch.
-- **Request/Response Performance** Tests (TCP, UDP) the measure the
- transaction rate through the virtual switch.
-- **Packet Delay Tests** to understand latency distribution for
- different packet sizes and over an extended test run to uncover
- outliers.
-- **Scalability Tests** to understand how the virtual switch performs
- as the number of flows, active ports, complexity of the forwarding
- logic's configuration... it has to deal with increases.
-- **Control Path and Datapath Coupling** Tests, to understand how
- closely coupled the datapath and the control path are as well as the
- effect of this coupling on the performance of the DUT.
-- **CPU and Memory Consumption Tests** to understand the virtual
- switch’s footprint on the system, this includes:
-
- * CPU core utilization.
- * CPU cache utilization.
- * Memory footprint.
- * System bus (QPI, PCI, ..) utilization.
- * Memory lanes utilization.
- * CPU cycles consumed per packet.
- * Time To Establish Flows Tests.
-
-- **Noisy Neighbour Tests**, to understand the effects of resource
- sharing on the performance of a virtual switch.
-
-**Note:** some of the tests above can be conducted simultaneously where
-the combined results would be insightful, for example Packet/Frame Delay
-and Scalability.
-
-
-
-.. 3.2
-
-.. _details-of-LTP:
-
-===================================
-Details of the Level Test Plan
-===================================
-
-This section describes the following items:
-* Test items and their identifiers (TestItems_)
-* Test Traceability Matrix (TestMatrix_)
-* Features to be tested (FeaturesToBeTested_)
-* Features not to be tested (FeaturesNotToBeTested_)
-* Approach (Approach_)
-* Item pass/fail criteria (PassFailCriteria_)
-* Suspension criteria and resumption requirements (SuspensionResumptionReqs_)
-
-.. 3.2.1
-
-.. _TestItems:
-
-Test items and their identifiers
-==================================
-The test item/application vsperf is trying to test are virtual switches and in
-particular their performance in an nfv environment. vsperf will first try to
-measure the maximum achievable performance by a virtual switch and then it will
-focus in on usecases that are as close to real life deployment scenarios as
-possible.
-
-.. 3.2.2
-
-.. _TestMatrix:
-
-Test Traceability Matrix
-==========================
-vswitchperf leverages the "3x3" matrix (introduced in
-https://tools.ietf.org/html/draft-ietf-bmwg-virtual-net-02) to achieve test
-traceability. The matrix was expanded to 3x4 to accommodate scale metrics when
-displaying the coverage of many metrics/benchmarks). Test case covreage in the
-LTD is tracked using the following catagories:
-
-
-+---------------+-------------+------------+---------------+-------------+
-| | | | | |
-| | SPEED | ACCURACY | RELIABILITY | SCALE |
-| | | | | |
-+---------------+-------------+------------+---------------+-------------+
-| | | | | |
-| Activation | X | X | X | X |
-| | | | | |
-+---------------+-------------+------------+---------------+-------------+
-| | | | | |
-| Operation | X | X | X | X |
-| | | | | |
-+---------------+-------------+------------+---------------+-------------+
-| | | | | |
-| De-activation | | | | |
-| | | | | |
-+---------------+-------------+------------+---------------+-------------+
-
-X = denotes a test catagory that has 1 or more test cases defined.
-
-.. 3.2.3
-
-.. _FeaturesToBeTested:
-
-Features to be tested
-==========================
-
-Characterizing virtual switches (i.e. Device Under Test (DUT) in this document)
-includes measuring the following performance metrics:
-
-- **Throughput** as defined by `RFC1242
- <https://www.rfc-editor.org/rfc/rfc1242.txt>`__: The maximum rate at which
- **none** of the offered frames are dropped by the DUT. The maximum frame
- rate and bit rate that can be transmitted by the DUT without any error
- should be recorded. Note there is an equivalent bit rate and a specific
- layer at which the payloads contribute to the bits. Errors and
- improperly formed frames or packets are dropped.
-- **Packet delay** introduced by the DUT and its cumulative effect on
- E2E networks. Frame delay can be measured equivalently.
-- **Packet delay variation**: measured from the perspective of the
- VNF/application. Packet delay variation is sometimes called "jitter".
- However, we will avoid the term "jitter" as the term holds different
- meaning to different groups of people. In this document we will
- simply use the term packet delay variation. The preferred form for this
- metric is the PDV form of delay variation defined in `RFC5481
- <https://www.rfc-editor.org/rfc/rfc5481.txt>`__. The most relevant
- measurement of PDV considers the delay variation of a single user flow,
- as this will be relevant to the size of end-system buffers to compensate
- for delay variation. The measurement system's ability to store the
- delays of individual packets in the flow of interest is a key factor
- that determines the specific measurement method. At the outset, it is
- ideal to view the complete PDV distribution. Systems that can capture
- and store packets and their delays have the freedom to calculate the
- reference minimum delay and to determine various quantiles of the PDV
- distribution accurately (in post-measurement processing routines).
- Systems without storage must apply algorithms to calculate delay and
- statistical measurements on the fly. For example, a system may store
- temporary estimates of the mimimum delay and the set of (100) packets
- with the longest delays during measurement (to calculate a high quantile,
- and update these sets with new values periodically.
- In some cases, a limited number of delay histogram bins will be
- available, and the bin limits will need to be set using results from
- repeated experiments. See section 8 of `RFC5481
- <https://www.rfc-editor.org/rfc/rfc5481.txt>`__.
-- **Packet loss** (within a configured waiting time at the receiver): All
- packets sent to the DUT should be accounted for.
-- **Burst behaviour**: measures the ability of the DUT to buffer packets.
-- **Packet re-ordering**: measures the ability of the device under test to
- maintain sending order throughout transfer to the destination.
-- **Packet correctness**: packets or Frames must be well-formed, in that
- they include all required fields, conform to length requirements, pass
- integrity checks, etc.
-- **Availability and capacity** of the DUT i.e. when the DUT is fully “up”
- and connected, following measurements should be captured for
- DUT without any network packet load:
-
- - Includes average power consumption of the CPUs (in various power states) and
- system over specified period of time. Time period should not be less
- than 60 seconds.
- - Includes average per core CPU utilization over specified period of time.
- Time period should not be less than 60 seconds.
- - Includes the number of NIC interfaces supported.
- - Includes headroom of VM workload processing cores (i.e. available
- for applications).
-
-.. 3.2.4
-
-.. _FeaturesNotToBeTested:
-
-Features not to be tested
-==========================
-vsperf doesn't intend to define or perform any functional tests. The aim is to
-focus on performance.
-
-.. 3.2.5
-
-.. _Approach:
-
-Approach
-==============
-The testing approach adoped by the vswitchperf project is black box testing,
-meaning the test inputs can be generated and the outputs captured and
-completely evaluated from the outside of the System Under Test. Some metrics
-can be collected on the SUT, such as cpu or memory utilization if the
-collection has no/minimal impact on benchmark.
-This section will look at the deployment scenarios and the general methodology
-used by vswitchperf. In addition, this section will also specify the details of
-the Test Report that must be collected for each of the test cases.
-
-.. 3.2.5.1
-
-Deployment Scenarios
---------------------------
-The following represents possible deployment test scenarios which can
-help to determine the performance of both the virtual switch and the
-datapaths to physical ports (to NICs) and to logical ports (to VNFs):
-
-.. 3.2.5.1.1
-
-.. _Phy2Phy:
-
-Physical port → vSwitch → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.. code-block:: console
-
- _
- +--------------------------------------------------+ |
- | +--------------------+ | |
- | | | | |
- | | v | | Host
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ _|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.2
-
-.. _PVP:
-
-Physical port → vSwitch → VNF → vSwitch → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-.. code-block:: console
-
- _
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ : | |
- | | | | | Guest
- | : v | |
- | +---------------+ +---------------+ | |
- | | logical port 0| | logical port 1| | |
- +---+---------------+-----------+---------------+---+ _|
- ^ :
- | |
- : v _
- +---+---------------+----------+---------------+---+ |
- | | logical port 0| | logical port 1| | |
- | +---------------+ +---------------+ | |
- | ^ : | |
- | | | | | Host
- | : v | |
- | +--------------+ +--------------+ | |
- | | phy port | vSwitch | phy port | | |
- +---+--------------+------------+--------------+---+ _|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.3
-
-.. _PVVP:
-
-Physical port → vSwitch → VNF → vSwitch → VNF → vSwitch → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | |
- | | v | | | v | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 1 | | | | 0 1 | | |
- +---+---------------+--+ +---+---------------+--+ _|
- ^ : ^ :
- | | | |
- : v : v _
- +---+---------------+---------+---------------+--+ |
- | | 0 1 | | 3 4 | | |
- | | logical ports | | logical ports | | |
- | +---------------+ +---------------+ | |
- | ^ | ^ | | | Host
- | | L-----------------+ v | |
- | +--------------+ +--------------+ | |
- | | phy ports | vSwitch | phy ports | | |
- +---+--------------+----------+--------------+---+ _|
- ^ ^ : :
- | | | |
- : : v v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.4
-
-Physical port → VNF → vSwitch → VNF → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- |+-------------------+ | | +-------------------+| |
- || Application | | | | Application || |
- |+-------------------+ | | +-------------------+| |
- | ^ | | | ^ | | | Guests
- | | v | | | v | |
- |+-------------------+ | | +-------------------+| |
- || logical ports | | | | logical ports || |
- || 0 1 | | | | 0 1 || |
- ++--------------------++ ++--------------------++ _|
- ^ : ^ :
- (PCI passthrough) | | (PCI passthrough)
- | v : | _
- +--------++------------+-+------------++---------+ |
- | | || 0 | | 1 || | | |
- | | ||logical port| |logical port|| | | |
- | | |+------------+ +------------+| | | |
- | | | | ^ | | | |
- | | | L-----------------+ | | | |
- | | | | | | | Host
- | | | vSwitch | | | |
- | | +-----------------------------+ | | |
- | | | | |
- | | v | |
- | +--------------+ +--------------+ | |
- | | phy port/VF | | phy port/VF | | |
- +-+--------------+--------------+--------------+-+ _|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.5
-
-Physical port → vSwitch → VNF
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | ^ | |
- | | | | Guest
- | : | |
- | +---------------+ | |
- | | logical port 0| | |
- +---+---------------+-------------------------------+ _|
- ^
- |
- : _
- +---+---------------+------------------------------+ |
- | | logical port 0| | |
- | +---------------+ | |
- | ^ | |
- | | | | Host
- | : | |
- | +--------------+ | |
- | | phy port | vSwitch | |
- +---+--------------+------------ -------------- ---+ _|
- ^
- |
- :
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.6
-
-VNF → vSwitch → physical port
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +---------------------------------------------------+ |
- | | |
- | +-------------------------------------------+ | |
- | | Application | | |
- | +-------------------------------------------+ | |
- | : | |
- | | | | Guest
- | v | |
- | +---------------+ | |
- | | logical port | | |
- +-------------------------------+---------------+---+ _|
- :
- |
- v _
- +------------------------------+---------------+---+ |
- | | logical port | | |
- | +---------------+ | |
- | : | |
- | | | | Host
- | v | |
- | +--------------+ | |
- | vSwitch | phy port | | |
- +-------------------------------+--------------+---+ _|
- :
- |
- v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-.. 3.2.5.1.7
-
-VNF → vSwitch → VNF → vSwitch
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +-------------------------+ +-------------------------+ |
- | Guest 1 | | Guest 2 | |
- | +-----------------+ | | +-----------------+ | |
- | | Application | | | | Application | | |
- | +-----------------+ | | +-----------------+ | |
- | : | | ^ | |
- | | | | | | | Guest
- | v | | : | |
- | +---------------+ | | +---------------+ | |
- | | logical port 0| | | | logical port 0| | |
- +-----+---------------+---+ +---+---------------+-----+ _|
- : ^
- | |
- v : _
- +----+---------------+------------+---------------+-----+ |
- | | port 0 | | port 1 | | |
- | +---------------+ +---------------+ | |
- | : ^ | |
- | | | | | Host
- | +--------------------+ | |
- | | |
- | vswitch | |
- +-------------------------------------------------------+ _|
-
-.. 3.2.5.1.8
-
-HOST 1(Physical port → virtual switch → VNF → virtual switch → Physical port)
-→ HOST 2(Physical port → virtual switch → VNF → virtual switch → Physical port)
-
-HOST 1 (PVP) → HOST 2 (PVP)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-.. code-block:: console
-
- _
- +----------------------+ +----------------------+ |
- | Guest 1 | | Guest 2 | |
- | +---------------+ | | +---------------+ | |
- | | Application | | | | Application | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | |
- | | v | | | v | | Guests
- | +---------------+ | | +---------------+ | |
- | | logical ports | | | | logical ports | | |
- | | 0 1 | | | | 0 1 | | |
- +---+---------------+--+ +---+---------------+--+ _|
- ^ : ^ :
- | | | |
- : v : v _
- +---+---------------+--+ +---+---------------+--+ |
- | | 0 1 | | | | 3 4 | | |
- | | logical ports | | | | logical ports | | |
- | +---------------+ | | +---------------+ | |
- | ^ | | | ^ | | | Hosts
- | | v | | | v | |
- | +--------------+ | | +--------------+ | |
- | | phy ports | | | | phy ports | | |
- +---+--------------+---+ +---+--------------+---+ _|
- ^ : : :
- | +-----------------+ |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-
-
-**Note:** For tests where the traffic generator and/or measurement
-receiver are implemented on VM and connected to the virtual switch
-through vNIC, the issues of shared resources and interactions between
-the measurement devices and the device under test must be considered.
-
-**Note:** Some RFC 2889 tests require a full-mesh sending and receiving
-pattern involving more than two ports. This possibility is illustrated in the
-Physical port → vSwitch → VNF → vSwitch → VNF → vSwitch → physical port
-diagram above (with 2 sending and 2 receiving ports, though all ports
-could be used bi-directionally).
-
-**Note:** When Deployment Scenarios are used in RFC 2889 address learning
-or cache capacity testing, an additional port from the vSwitch must be
-connected to the test device. This port is used to listen for flooded
-frames.
-
-.. 3.2.5.2
-
-General Methodology:
---------------------------
-To establish the baseline performance of the virtual switch, tests would
-initially be run with a simple workload in the VNF (the recommended
-simple workload VNF would be `DPDK <http://www.dpdk.org/>`__'s testpmd
-application forwarding packets in a VM or vloop\_vnf a simple kernel
-module that forwards traffic between two network interfaces inside the
-virtualized environment while bypassing the networking stack).
-Subsequently, the tests would also be executed with a real Telco
-workload running in the VNF, which would exercise the virtual switch in
-the context of higher level Telco NFV use cases, and prove that its
-underlying characteristics and behaviour can be measured and validated.
-Suitable real Telco workload VNFs are yet to be identified.
-
-.. 3.2.5.2.1
-
-.. _default-test-parameters:
-
-Default Test Parameters
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The following list identifies the default parameters for suite of
-tests:
-
-- Reference application: Simple forwarding or Open Source VNF.
-- Frame size (bytes): 64, 128, 256, 512, 1024, 1280, 1518, 2K, 4k OR
- Packet size based on use-case (e.g. RTP 64B, 256B) OR Mix of packet sizes as
- maintained by the Functest project <https://wiki.opnfv.org/traffic_profile_management>.
-- Reordering check: Tests should confirm that packets within a flow are
- not reordered.
-- Duplex: Unidirectional / Bidirectional. Default: Full duplex with
- traffic transmitting in both directions, as network traffic generally
- does not flow in a single direction. By default the data rate of
- transmitted traffic should be the same in both directions, please
- note that asymmetric traffic (e.g. downlink-heavy) tests will be
- mentioned explicitly for the relevant test cases.
-- Number of Flows: Default for non scalability tests is a single flow.
- For scalability tests the goal is to test with maximum supported
- flows but where possible will test up to 10 Million flows. Start with
- a single flow and scale up. By default flows should be added
- sequentially, tests that add flows simultaneously will explicitly
- call out their flow addition behaviour. Packets are generated across
- the flows uniformly with no burstiness. For multi-core tests should
- consider the number of packet flows based on vSwitch/VNF multi-thread
- implementation and behavior.
-
-- Traffic Types: UDP, SCTP, RTP, GTP and UDP traffic.
-- Deployment scenarios are:
-- Physical → virtual switch → physical.
-- Physical → virtual switch → VNF → virtual switch → physical.
-- Physical → virtual switch → VNF → virtual switch → VNF → virtual
- switch → physical.
-- Physical → VNF → virtual switch → VNF → physical.
-- Physical → virtual switch → VNF.
-- VNF → virtual switch → Physical.
-- VNF → virtual switch → VNF.
-
-Tests MUST have these parameters unless otherwise stated. **Test cases
-with non default parameters will be stated explicitly**.
-
-**Note**: For throughput tests unless stated otherwise, test
-configurations should ensure that traffic traverses the installed flows
-through the virtual switch, i.e. flows are installed and have an appropriate
-time out that doesn't expire before packet transmission starts.
-
-.. 3.2.5.2.2
-
-Flow Classification
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Virtual switches classify packets into flows by processing and matching
-particular header fields in the packet/frame and/or the input port where
-the packets/frames arrived. The vSwitch then carries out an action on
-the group of packets that match the classification parameters. Thus a
-flow is considered to be a sequence of packets that have a shared set of
-header field values or have arrived on the same port and have the same
-action applied to them. Performance results can vary based on the
-parameters the vSwitch uses to match for a flow. The recommended flow
-classification parameters for L3 vSwitch performance tests are: the
-input port, the source IP address, the destination IP address and the
-Ethernet protocol type field. It is essential to increase the flow
-time-out time on a vSwitch before conducting any performance tests that
-do not measure the flow set-up time. Normally the first packet of a
-particular flow will install the flow in the vSwitch which adds an
-additional latency, subsequent packets of the same flow are not subject
-to this latency if the flow is already installed on the vSwitch.
-
-.. 3.2.5.2.3
-
-Test Priority
-~~~~~~~~~~~~~~~~~~~~~
-
-Tests will be assigned a priority in order to determine which tests
-should be implemented immediately and which tests implementations
-can be deferred.
-
-Priority can be of following types: - Urgent: Must be implemented
-immediately. - High: Must be implemented in the next release. - Medium:
-May be implemented after the release. - Low: May or may not be
-implemented at all.
-
-.. 3.2.5.2.4
-
-SUT Setup
-~~~~~~~~~~~~~~~~~~
-
-The SUT should be configured to its "default" state. The
-SUT's configuration or set-up must not change between tests in any way
-other than what is required to do the test. All supported protocols must
-be configured and enabled for each test set up.
-
-.. 3.2.5.2.5
-
-Port Configuration
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The DUT should be configured with n ports where
-n is a multiple of 2. Half of the ports on the DUT should be used as
-ingress ports and the other half of the ports on the DUT should be used
-as egress ports. Where a DUT has more than 2 ports, the ingress data
-streams should be set-up so that they transmit packets to the egress
-ports in sequence so that there is an even distribution of traffic
-across ports. For example, if a DUT has 4 ports 0(ingress), 1(ingress),
-2(egress) and 3(egress), the traffic stream directed at port 0 should
-output a packet to port 2 followed by a packet to port 3. The traffic
-stream directed at port 1 should also output a packet to port 2 followed
-by a packet to port 3.
-
-.. 3.2.5.2.6
-
-Frame Formats
-~~~~~~~~~~~~~~~~~~~~~
-
-**Frame formats Layer 2 (data link layer) protocols**
-
-- Ethernet II
-
-.. code-block:: console
-
- +---------------------------+-----------+
- | Ethernet Header | Payload | Check Sum |
- +-----------------+---------+-----------+
- |_________________|_________|___________|
- 14 Bytes 46 - 1500 4 Bytes
- Bytes
-
-
-**Layer 3 (network layer) protocols**
-
-- IPv4
-
-.. code-block:: console
-
- +-----------------+-----------+---------+-----------+
- | Ethernet Header | IP Header | Payload | Checksum |
- +-----------------+-----------+---------+-----------+
- |_________________|___________|_________|___________|
- 14 Bytes 20 bytes 26 - 1480 4 Bytes
- Bytes
-
-- IPv6
-
-.. code-block:: console
-
- +-----------------+-----------+---------+-----------+
- | Ethernet Header | IP Header | Payload | Checksum |
- +-----------------+-----------+---------+-----------+
- |_________________|___________|_________|___________|
- 14 Bytes 40 bytes 26 - 1460 4 Bytes
- Bytes
-
-**Layer 4 (transport layer) protocols**
-
- - TCP
- - UDP
- - SCTP
-
-.. code-block:: console
-
- +-----------------+-----------+-----------------+---------+-----------+
- | Ethernet Header | IP Header | Layer 4 Header | Payload | Checksum |
- +-----------------+-----------+-----------------+---------+-----------+
- |_________________|___________|_________________|_________|___________|
- 14 Bytes 40 bytes 20 Bytes 6 - 1460 4 Bytes
- Bytes
-
-
-**Layer 5 (application layer) protocols**
-
- - RTP
- - GTP
-
-.. code-block:: console
-
- +-----------------+-----------+-----------------+---------+-----------+
- | Ethernet Header | IP Header | Layer 4 Header | Payload | Checksum |
- +-----------------+-----------+-----------------+---------+-----------+
- |_________________|___________|_________________|_________|___________|
- 14 Bytes 20 bytes 20 Bytes >= 6 Bytes 4 Bytes
-
-.. 3.2.5.2.7
-
-Packet Throughput
-~~~~~~~~~~~~~~~~~~~~~~~~~
-There is a difference between an Ethernet frame,
-an IP packet, and a UDP datagram. In the seven-layer OSI model of
-computer networking, packet refers to a data unit at layer 3 (network
-layer). The correct term for a data unit at layer 2 (data link layer) is
-a frame, and at layer 4 (transport layer) is a segment or datagram.
-
-Important concepts related to 10GbE performance are frame rate and
-throughput. The MAC bit rate of 10GbE, defined in the IEEE standard 802
-.3ae, is 10 billion bits per second. Frame rate is based on the bit rate
-and frame format definitions. Throughput, defined in IETF RFC 1242, is
-the highest rate at which the system under test can forward the offered
-load, without loss.
-
-The frame rate for 10GbE is determined by a formula that divides the 10
-billion bits per second by the preamble + frame length + inter-frame
-gap.
-
-The maximum frame rate is calculated using the minimum values of the
-following parameters, as described in the IEEE 802 .3ae standard:
-
-- Preamble: 8 bytes \* 8 = 64 bits
-- Frame Length: 64 bytes (minimum) \* 8 = 512 bits
-- Inter-frame Gap: 12 bytes (minimum) \* 8 = 96 bits
-
-Therefore, Maximum Frame Rate (64B Frames)
-= MAC Transmit Bit Rate / (Preamble + Frame Length + Inter-frame Gap)
-= 10,000,000,000 / (64 + 512 + 96)
-= 10,000,000,000 / 672
-= 14,880,952.38 frame per second (fps)
-
-.. 3.2.5.3
-
-RFCs for testing virtual switch performance
---------------------------------------------------
-
-The starting point for defining the suite of tests for benchmarking the
-performance of a virtual switch is to take existing RFCs and standards
-that were designed to test their physical counterparts and adapting them
-for testing virtual switches. The rationale behind this is to establish
-a fair comparison between the performance of virtual and physical
-switches. This section outlines the RFCs that are used by this
-specification.
-
-.. 3.2.5.3.1
-
-RFC 1242 Benchmarking Terminology for Network Interconnection
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Devices RFC 1242 defines the terminology that is used in describing
-performance benchmarking tests and their results. Definitions and
-discussions covered include: Back-to-back, bridge, bridge/router,
-constant load, data link frame size, frame loss rate, inter frame gap,
-latency, and many more.
-
-.. 3.2.5.3.2
-
-RFC 2544 Benchmarking Methodology for Network Interconnect Devices
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 2544 outlines a benchmarking methodology for network Interconnect
-Devices. The methodology results in performance metrics such as latency,
-frame loss percentage, and maximum data throughput.
-
-In this document network “throughput” (measured in millions of frames
-per second) is based on RFC 2544, unless otherwise noted. Frame size
-refers to Ethernet frames ranging from smallest frames of 64 bytes to
-largest frames of 9K bytes.
-
-Types of tests are:
-
-1. Throughput test defines the maximum number of frames per second
- that can be transmitted without any error, or 0% loss ratio.
- In some Throughput tests (and those tests with long duration),
- evaluation of an additional frame loss ratio is suggested. The
- current ratio (10^-7 %) is based on understanding the typical
- user-to-user packet loss ratio needed for good application
- performance and recognizing that a single transfer through a
- vswitch must contribute a tiny fraction of user-to-user loss.
- Further, the ratio 10^-7 % also recognizes practical limitations
- when measuring loss ratio.
-
-2. Latency test measures the time required for a frame to travel from
- the originating device through the network to the destination device.
- Please note that RFC2544 Latency measurement will be superseded with
- a measurement of average latency over all successfully transferred
- packets or frames.
-
-3. Frame loss test measures the network’s
- response in overload conditions - a critical indicator of the
- network’s ability to support real-time applications in which a
- large amount of frame loss will rapidly degrade service quality.
-
-4. Burst test assesses the buffering capability of a virtual switch. It
- measures the maximum number of frames received at full line rate
- before a frame is lost. In carrier Ethernet networks, this
- measurement validates the excess information rate (EIR) as defined in
- many SLAs.
-
-5. System recovery to characterize speed of recovery from an overload
- condition.
-
-6. Reset to characterize speed of recovery from device or software
- reset. This type of test has been updated by `RFC6201
- <https://www.rfc-editor.org/rfc/rfc6201.txt>`__ as such,
- the methodology defined by this specification will be that of RFC 6201.
-
-Although not included in the defined RFC 2544 standard, another crucial
-measurement in Ethernet networking is packet delay variation. The
-definition set out by this specification comes from
-`RFC5481 <https://www.rfc-editor.org/rfc/rfc5481.txt>`__.
-
-.. 3.2.5.3.3
-
-RFC 2285 Benchmarking Terminology for LAN Switching Devices
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 2285 defines the terminology that is used to describe the
-terminology for benchmarking a LAN switching device. It extends RFC
-1242 and defines: DUTs, SUTs, Traffic orientation and distribution,
-bursts, loads, forwarding rates, etc.
-
-.. 3.2.5.3.4
-
-RFC 2889 Benchmarking Methodology for LAN Switching
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 2889 outlines a benchmarking methodology for LAN switching, it
-extends RFC 2544. The outlined methodology gathers performance
-metrics for forwarding, congestion control, latency, address handling
-and finally filtering.
-
-.. 3.2.5.3.5
-
-RFC 3918 Methodology for IP Multicast Benchmarking
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 3918 outlines a methodology for IP Multicast benchmarking.
-
-.. 3.2.5.3.6
-
-RFC 4737 Packet Reordering Metrics
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 4737 describes metrics for identifying and counting re-ordered
-packets within a stream, and metrics to measure the extent each
-packet has been re-ordered.
-
-.. 3.2.5.3.7
-
-RFC 5481 Packet Delay Variation Applicability Statement
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 5481 defined two common, but different forms of delay variation
-metrics, and compares the metrics over a range of networking
-circumstances and tasks. The most suitable form for vSwitch
-benchmarking is the "PDV" form.
-
-.. 3.2.5.3.8
-
-RFC 6201 Device Reset Characterization
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-RFC 6201 extends the methodology for characterizing the speed of
-recovery of the DUT from device or software reset described in RFC
-2544.
-
-.. 3.2.6:
-
-.. _PassFailCriteria:
-
-Item pass/fail criteria
-=========================
-
-vswitchperf does not specify Pass/Fail criteria for the tests in terms of a
-threshold, as benchmarks do not (and should not do this). The results/metrics
-for a test are simply reported. If it had to be defined, a test is considered
-to have passed if it succesfully completed and a relavent metric was
-recorded/reported for the SUT.
-
-.. 3.2.7:
-
-.. _SuspensionResumptionReqs:
-
-Suspension criteria and resumption requirements
-================================================
-In the case of a throughput test, a test should be suspended if a virtual
-switch is failing to forward any traffic. A test should be restarted from a
-clean state if the intention is to carry out the test again.
-
-.. 3.2.8:
-
-.. _TestDelierables:
-
-Test deliverables
-==================
-Each test should produce a test report that details SUT information as well as
-the test results. There are a number of parameters related to the system, DUT
-and tests that can affect the repeatability of a test results and should be
-recorded. In order to minimise the variation in the results of a test,
-it is recommended that the test report includes the following information:
-
-- Hardware details including:
-
- - Platform details.
- - Processor details.
- - Memory information (see below)
- - Number of enabled cores.
- - Number of cores used for the test.
- - Number of physical NICs, as well as their details (manufacturer,
- versions, type and the PCI slot they are plugged into).
- - NIC interrupt configuration.
- - BIOS version, release date and any configurations that were
- modified.
-
-- Software details including:
-
- - OS version (for host and VNF)
- - Kernel version (for host and VNF)
- - GRUB boot parameters (for host and VNF).
- - Hypervisor details (Type and version).
- - Selected vSwitch, version number or commit id used.
- - vSwitch launch command line if it has been parameterised.
- - Memory allocation to the vSwitch – which NUMA node it is using,
- and how many memory channels.
- - Where the vswitch is built from source: compiler details including
- versions and the flags that were used to compile the vSwitch.
- - DPDK or any other SW dependency version number or commit id used.
- - Memory allocation to a VM - if it's from Hugpages/elsewhere.
- - VM storage type: snapshot/independent persistent/independent
- non-persistent.
- - Number of VMs.
- - Number of Virtual NICs (vNICs), versions, type and driver.
- - Number of virtual CPUs and their core affinity on the host.
- - Number vNIC interrupt configuration.
- - Thread affinitization for the applications (including the vSwitch
- itself) on the host.
- - Details of Resource isolation, such as CPUs designated for
- Host/Kernel (isolcpu) and CPUs designated for specific processes
- (taskset).
-
-- Memory Details
-
- - Total memory
- - Type of memory
- - Used memory
- - Active memory
- - Inactive memory
- - Free memory
- - Buffer memory
- - Swap cache
- - Total swap
- - Used swap
- - Free swap
-
-- Test duration.
-- Number of flows.
-- Traffic Information:
-
- - Traffic type - UDP, TCP, IMIX / Other.
- - Packet Sizes.
-
-- Deployment Scenario.
-
-**Note**: Tests that require additional parameters to be recorded will
-explicitly specify this.
-
-
-.. 3.3:
-
-.. _TestManagement:
-
-Test management
-=================
-This section will detail the test activities that will be conducted by vsperf
-as well as the infrastructure that will be used to complete the tests in OPNFV.
-
-.. 3.3.1:
-
-Planned activities and tasks; test progression
-=================================================
-A key consideration when conducting any sort of benchmark is trying to
-ensure the consistency and repeatability of test results between runs.
-When benchmarking the performance of a virtual switch there are many
-factors that can affect the consistency of results. This section
-describes these factors and the measures that can be taken to limit
-their effects. In addition, this section will outline some system tests
-to validate the platform and the VNF before conducting any vSwitch
-benchmarking tests.
-
-**System Isolation:**
-
-When conducting a benchmarking test on any SUT, it is essential to limit
-(and if reasonable, eliminate) any noise that may interfere with the
-accuracy of the metrics collected by the test. This noise may be
-introduced by other hardware or software (OS, other applications), and
-can result in significantly varying performance metrics being collected
-between consecutive runs of the same test. In the case of characterizing
-the performance of a virtual switch, there are a number of configuration
-parameters that can help increase the repeatability and stability of
-test results, including:
-
-- OS/GRUB configuration:
-
- - maxcpus = n where n >= 0; limits the kernel to using 'n'
- processors. Only use exactly what you need.
- - isolcpus: Isolate CPUs from the general scheduler. Isolate all
- CPUs bar one which will be used by the OS.
- - use taskset to affinitize the forwarding application and the VNFs
- onto isolated cores. VNFs and the vSwitch should be allocated
- their own cores, i.e. must not share the same cores. vCPUs for the
- VNF should be affinitized to individual cores also.
- - Limit the amount of background applications that are running and
- set OS to boot to runlevel 3. Make sure to kill any unnecessary
- system processes/daemons.
- - Only enable hardware that you need to use for your test – to
- ensure there are no other interrupts on the system.
- - Configure NIC interrupts to only use the cores that are not
- allocated to any other process (VNF/vSwitch).
-
-- NUMA configuration: Any unused sockets in a multi-socket system
- should be disabled.
-- CPU pinning: The vSwitch and the VNF should each be affinitized to
- separate logical cores using a combination of maxcpus, isolcpus and
- taskset.
-- BIOS configuration: BIOS should be configured for performance where
- an explicit option exists, sleep states should be disabled, any
- virtualization optimization technologies should be enabled, and
- hyperthreading should also be enabled, turbo boost and overclocking
- should be disabled.
-
-**System Validation:**
-
-System validation is broken down into two sub-categories: Platform
-validation and VNF validation. The validation test itself involves
-verifying the forwarding capability and stability for the sub-system
-under test. The rationale behind system validation is two fold. Firstly
-to give a tester confidence in the stability of the platform or VNF that
-is being tested; and secondly to provide base performance comparison
-points to understand the overhead introduced by the virtual switch.
-
-* Benchmark platform forwarding capability: This is an OPTIONAL test
- used to verify the platform and measure the base performance (maximum
- forwarding rate in fps and latency) that can be achieved by the
- platform without a vSwitch or a VNF. The following diagram outlines
- the set-up for benchmarking Platform forwarding capability:
-
- .. code-block:: console
-
- __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | l2fw or DPDK L2FWD app | | Host
- | | | | |
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-* Benchmark VNF forwarding capability: This test is used to verify
- the VNF and measure the base performance (maximum forwarding rate in
- fps and latency) that can be achieved by the VNF without a vSwitch.
- The performance metrics collected by this test will serve as a key
- comparison point for NIC passthrough technologies and vSwitches. VNF
- in this context refers to the hypervisor and the VM. The following
- diagram outlines the set-up for benchmarking VNF forwarding
- capability:
-
- .. code-block:: console
-
- __
- +--------------------------------------------------+ |
- | +------------------------------------------+ | |
- | | | | |
- | | VNF | | |
- | | | | |
- | +------------------------------------------+ | |
- | | Passthrough/SR-IOV | | Host
- | +------------------------------------------+ | |
- | | NIC | | |
- +---+------------------------------------------+---+ __|
- ^ :
- | |
- : v
- +--------------------------------------------------+
- | |
- | traffic generator |
- | |
- +--------------------------------------------------+
-
-
-**Methodology to benchmark Platform/VNF forwarding capability**
-
-
-The recommended methodology for the platform/VNF validation and
-benchmark is: - Run `RFC2889 <https://www.rfc-editor.org/rfc/rfc2289.txt>`__
-Maximum Forwarding Rate test, this test will produce maximum
-forwarding rate and latency results that will serve as the
-expected values. These expected values can be used in
-subsequent steps or compared with in subsequent validation tests. -
-Transmit bidirectional traffic at line rate/max forwarding rate
-(whichever is higher) for at least 72 hours, measure throughput (fps)
-and latency. - Note: Traffic should be bidirectional. - Establish a
-baseline forwarding rate for what the platform can achieve. - Additional
-validation: After the test has completed for 72 hours run bidirectional
-traffic at the maximum forwarding rate once more to see if the system is
-still functional and measure throughput (fps) and latency. Compare the
-measure the new obtained values with the expected values.
-
-**NOTE 1**: How the Platform is configured for its forwarding capability
-test (BIOS settings, GRUB configuration, runlevel...) is how the
-platform should be configured for every test after this
-
-**NOTE 2**: How the VNF is configured for its forwarding capability test
-(# of vCPUs, vNICs, Memory, affinitization…) is how it should be
-configured for every test that uses a VNF after this.
-
-**Methodology to benchmark the VNF to vSwitch to VNF deployment scenario**
-
-vsperf has identified the following concerns when benchmarking the VNF to
-vSwitch to VNF deployment scenario:
-
-* The accuracy of the timing synchronization between VNFs/VMs.
-* The clock accuracy of a VNF/VM if they were to be used as traffic generators.
-* VNF traffic generator/receiver may be using resources of the system under
- test, causing at least three forms of workload to increase as the traffic
- load increases (generation, switching, receiving).
-
-The recommendation from vsperf is that tests for this sceanario must
-include an external HW traffic generator to act as the tester/traffic transmitter
-and receiver. The perscribed methodology to benchmark this deployment scanrio with
-an external tester involves the following three steps:
-
-#. Determine the forwarding capability and latency through the virtual interface
-connected to the VNF/VM.
-
-.. Figure:: vm2vm_virtual_interface_benchmark.png
-
- Virtual interfaces performance benchmark
-
-#. Determine the forwarding capability and latency through the VNF/hypervisor.
-
-.. Figure:: vm2vm_hypervisor_benchmark.png
-
- Hypervisor performance benchmark
-
-#. Determine the forwarding capability and latency for the VNF to vSwitch to VNF
- taking the information from the previous two steps into account.
-
-.. Figure:: vm2vm_benchmark.png
-
- VNF to vSwitch to VNF performance benchmark
-
-vsperf also identified an alternative configuration for the final step:
-
-.. Figure:: vm2vm_alternative_benchmark.png
-
- VNF to vSwitch to VNF alternative performance benchmark
-
-.. 3.3.2:
-
-Environment/infrastructure
-============================
-Intel is providing a hosted test-bed with nine bare-metal environments
-allocated to different OPNFV projects. Currently a number of servers in
-`Intel POD 3 <https://wiki.opnfv.org/display/pharos/Intel+Pod3>`__ are
-allocated to vsperf:
-
- * pod3-wcp-node3 and pod3-wcp-node4 which are used for CI jobs.
- * pod3-node6 which is used as a vsperf sandbox environment.
-
-vsperf CI
----------
-vsperf CI jobs are broken down into:
-
- * Daily job:
-
- * Runs everyday takes about 10 hours to complete.
- * TESTCASES_DAILY='phy2phy_tput back2back phy2phy_tput_mod_vlan
- phy2phy_scalability pvp_tput pvp_back2back pvvp_tput pvvp_back2back'.
- * TESTPARAM_DAILY='--test-params TRAFFICGEN_PKT_SIZES=(64,128,512,1024,1518)'.
-
- * Merge job:
-
- * Runs whenever patches are merged to master.
- * Runs a basic Sanity test.
-
- * Verify job:
-
- * Runs every time a patch is pushed to gerrit.
- * Builds documentation.
-
-Scripts:
---------
-There are 2 scripts that are part of VSPERFs CI:
-
- * build-vsperf.sh: Lives in the VSPERF repository in the ci/ directory and is
- used to run vsperf with the appropriate cli parameters.
- * vswitchperf.yml: YAML description of our jenkins job. lives in the RELENG
- repository.
-
-More info on vsperf CI can be found here:
-https://wiki.opnfv.org/display/vsperf/VSPERF+CI
-
-.. 3.3.3:
-
-Responsibilities and authority
-===============================
-The group responsible for managing, designing, preparing and executing the
-tests listed in the LTD are the vsperf committers and contributors. The vsperf
-committers and contributors should work with the relavent OPNFV projects to
-ensure that the infrastructure is in place for testing vswitches, and that the
-results are published to common end point (a results database).
-
diff --git a/docs/testing/developer/results/results.rst b/docs/testing/developer/results/results.rst
deleted file mode 100644
index 42df9611..00000000
--- a/docs/testing/developer/results/results.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-OPNFV VSPERF CI Results
-=========================
-The VSPERF CI jobs are run daily through Jenkins. Result samples can be found at
-https://wiki.opnfv.org/display/vsperf/Vsperf+Results
-
-The following table maps the results in the test dashboard to the appropriate
-test case in the VSPERF Framework and specifies the metric the vertical/Y axis
-is plotting. **Please note**, the presence of dpdk within a test name signifies
-that the vswitch under test was OVS with DPDK, while its absence indicates that
-the vswitch under test was stock OVS.
-
-===================== ===================== ================== ===============
- Dashboard Test Framework Test Metric Guest Interface
-===================== ===================== ================== ===============
-tput_ovsdpdk phy2phy_tput Throughput (FPS) N/A
-tput_ovs phy2phy_tput Throughput (FPS) N/A
-b2b_ovsdpdk back2back Back-to-back value N/A
-b2b_ovs back2back Back-to-back value N/A
-tput_mod_vlan_ovs phy2phy_tput_mod_vlan Throughput (FPS) N/A
-tput_mod_vlan_ovsdpdk phy2phy_tput_mod_vlan Throughput (FPS) N/A
-scalability_ovs phy2phy_scalability Throughput (FPS) N/A
-scalability_ovsdpdk phy2phy_scalability Throughput (FPS) N/A
-pvp_tput_ovsdpdkuser pvp_tput Throughput (FPS) vhost-user
-pvp_tput_ovsvirtio pvp_tput Throughput (FPS) virtio-net
-pvp_b2b_ovsdpdkuser pvp_back2back Back-to-back value vhost-user
-pvp_b2b_ovsvirtio pvp_back2back Back-to-back value virtio-net
-pvvp_tput_ovsdpdkuser pvvp_tput Throughput (FPS) vhost-user
-pvvp_tput_ovsvirtio pvvp_tput Throughput (FPS) virtio-net
-pvvp_b2b_ovsdpdkuser pvvp_back2back Throughput (FPS) vhost-user
-pvvp_b2b_ovsvirtio pvvp_back2back Throughput (FPS) virtio-net
-===================== ===================== ================== ===============
-
-The loopback application in the VNF used for PVP and PVVP scenarios was DPDK
-testpmd.
diff --git a/docs/testing/developer/results/scenario.rst b/docs/testing/developer/results/scenario.rst
deleted file mode 100644
index 2967fc60..00000000
--- a/docs/testing/developer/results/scenario.rst
+++ /dev/null
@@ -1,36 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-OPNFV VSPERF Scenarios
-===========================
-
-Predefined network topologies:
-
-* :ref:`Phy2Phy <Phy2Phy>`: Physical port -> vSwitch -> Physical port.
-* :ref:`PVP <PVP>`: Physical port -> vSwitch -> VNF -> vSwitch -> Physical port.
-* :ref:`PVVP <PVVP>`: Physical port -> vSwitch -> VNF -> vSwitch -> VNF -> vSwitch ->
- Physical port.
-
-Loopback applications in the Guest can be:
-* `DPDK testpmd <http://dpdk.org/doc/guides/testpmd_app_ug/index.html>`_.
-* Linux Bridge.
-* :ref:`l2fwd-module`
-
-===================== ===========================================================
- Testcase Definition
-===================== ===========================================================
-phy2phy_tput :ref:`PacketLossRatio <PacketLossRatio>` for :ref:`Phy2Phy <Phy2Phy>`
-back2back :ref:`BackToBackFrames <BackToBackFrames>` for :ref:`Phy2Phy <Phy2Phy>`
-phy2phy_tput_mod_vlan :ref:`PacketLossRatioFrameModification <PacketLossRatioFrameModification>` for :ref:`Phy2Phy <Phy2Phy>`
-phy2phy_cont :ref:`Phy2Phy <Phy2Phy>` blast vswitch at x% TX rate and measure throughput
-pvp_cont :ref:`PVP <PVP>` blast vswitch at x% TX rate and measure throughput
-pvvp_cont :ref:`PVVP <PVVP>` blast vswitch at x% TX rate and measure throughput
-phy2phy_scalability :ref:`Scalability0PacketLoss <Scalability0PacketLoss>` for :ref:`Phy2Phy <Phy2Phy>`
-pvp_tput :ref:`PacketLossRatio <PacketLossRatio>` for :ref:`PVP <PVP>`
-pvp_back2back :ref:`BackToBackFrames <BackToBackFrames>` for :ref:`PVP <PVP>`
-pvvp_tput :ref:`PacketLossRatio <PacketLossRatio>` for :ref:`PVVP <PVVP>`
-pvvp_back2back :ref:`BackToBackFrames <BackToBackFrames>` for :ref:`PVVP <PVVP>`
-phy2phy_cpu_load :ref:`CPU0PacketLoss <CPU0PacketLoss>` for :ref:`Phy2Phy <Phy2Phy>`
-phy2phy_mem_load Same as :ref:`CPU0PacketLoss <CPU0PacketLoss>` but using a memory intensive app
-===================== ===========================================================
diff --git a/docs/testing/user/configguide/LICENSE b/docs/testing/user/configguide/LICENSE
deleted file mode 100644
index 7bc572ce..00000000
--- a/docs/testing/user/configguide/LICENSE
+++ /dev/null
@@ -1,2 +0,0 @@
-This work is licensed under a Creative Commons Attribution 4.0 International License.
-http://creativecommons.org/licenses/by/4.0
diff --git a/docs/testing/user/configguide/TCLServerProperties.png b/docs/testing/user/configguide/TCLServerProperties.png
deleted file mode 100644
index 682de7c5..00000000
--- a/docs/testing/user/configguide/TCLServerProperties.png
+++ /dev/null
Binary files differ
diff --git a/docs/testing/user/configguide/installation.rst b/docs/testing/user/configguide/installation.rst
deleted file mode 100644
index 1965a8f5..00000000
--- a/docs/testing/user/configguide/installation.rst
+++ /dev/null
@@ -1,310 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-.. _vsperf-installation:
-
-======================
-Installing vswitchperf
-======================
-
-Downloading vswitchperf
------------------------
-
-The vswitchperf can be downloaded from its official git repository, which is
-hosted by OPNFV. It is necessary to install a ``git`` at your DUT before downloading
-vswitchperf. Installation of ``git`` is specific to the packaging system used by
-Linux OS installed at DUT.
-
-Example of installation of GIT package and its dependencies:
-
-* in case of OS based on RedHat Linux:
-
- .. code:: bash
-
- sudo yum install git
-
-
-* in case of Ubuntu or Debian:
-
- .. code:: bash
-
- sudo apt-get install git
-
-After the ``git`` is successfully installed at DUT, then vswitchperf can be downloaded
-as follows:
-
-.. code:: bash
-
- git clone http://git.opnfv.org/vswitchperf
-
-The last command will create a directory ``vswitchperf`` with a local copy of vswitchperf
-repository.
-
-Supported Operating Systems
----------------------------
-
-* CentOS 7.3
-* Fedora 24 (kernel 4.8 requires DPDK 16.11 and newer)
-* Fedora 25 (kernel 4.9 requires DPDK 16.11 and newer)
-* openSUSE 42.2
-* RedHat 7.2 Enterprise Linux
-* RedHat 7.3 Enterprise Linux
-* Ubuntu 14.04
-* Ubuntu 16.04
-* Ubuntu 16.10 (kernel 4.8 requires DPDK 16.11 and newer)
-
-Supported vSwitches
--------------------
-
-The vSwitch must support Open Flow 1.3 or greater.
-
-* Open vSwitch
-* Open vSwitch with DPDK support
-* TestPMD application from DPDK (supports p2p and pvp scenarios)
-
-Supported Hypervisors
----------------------
-
-* Qemu version 2.3 or greater (version 2.5.0 is recommended)
-
-Supported VNFs
---------------
-
-In theory, it is possible to use any VNF image, which is compatible
-with supported hypervisor. However such VNF must ensure, that appropriate
-number of network interfaces is configured and that traffic is properly
-forwarded among them. For new vswitchperf users it is recommended to start
-with official vloop-vnf_ image, which is maintained by vswitchperf community.
-
-.. _vloop-vnf:
-
-vloop-vnf
-=========
-
-The official VM image is called vloop-vnf and it is available for free download
-from OPNFV artifactory. This image is based on Linux Ubuntu distribution and it
-supports following applications for traffic forwarding:
-
-* DPDK testpmd
-* Linux Bridge
-* Custom l2fwd module
-
-The vloop-vnf can be downloaded to DUT, for example by ``wget``:
-
- .. code:: bash
-
- wget http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20160823.qcow2
-
-**NOTE:** In case that ``wget`` is not installed at your DUT, you could install it at RPM
-based system by ``sudo yum install wget`` or at DEB based system by ``sudo apt-get install
-wget``.
-
-Changelog of vloop-vnf:
-
- * `vloop-vnf-ubuntu-14.04_20160823`_
-
- * ethtool installed
- * only 1 NIC is configured by default to speed up boot with 1 NIC setup
- * security updates applied
-
- * `vloop-vnf-ubuntu-14.04_20160804`_
-
- * Linux kernel 4.4.0 installed
- * libnuma-dev installed
- * security updates applied
-
- * `vloop-vnf-ubuntu-14.04_20160303`_
-
- * snmpd service is disabled by default to avoid error messages during VM boot
- * security updates applied
-
- * `vloop-vnf-ubuntu-14.04_20151216`_
-
- * version with development tools required for build of DPDK and l2fwd
-
-.. _vsperf-installation-script:
-
-Installation
-------------
-
-The test suite requires Python 3.3 or newer and relies on a number of other
-system and python packages. These need to be installed for the test suite
-to function.
-
-Installation of required packages, preparation of Python 3 virtual
-environment and compilation of OVS, DPDK and QEMU is performed by
-script **systems/build_base_machine.sh**. It should be executed under
-user account, which will be used for vsperf execution.
-
-**NOTE:** Password-less sudo access must be configured for given
-user account before script is executed.
-
-.. code:: bash
-
- $ cd systems
- $ ./build_base_machine.sh
-
-**NOTE:** you don't need to go into any of the systems subdirectories,
-simply run the top level **build_base_machine.sh**, your OS will be detected
-automatically.
-
-Script **build_base_machine.sh** will install all the vsperf dependencies
-in terms of system packages, Python 3.x and required Python modules.
-In case of CentOS 7 or RHEL it will install Python 3.3 from an additional
-repository provided by Software Collections (`a link`_). Installation script
-will also use `virtualenv`_ to create a vsperf virtual environment, which is
-isolated from the default Python environment. This environment will reside in a
-directory called **vsperfenv** in $HOME. It will ensure, that system wide Python
-installation is not modified or broken by VSPERF installation. The complete list
-of Python packages installed inside virtualenv can be found at file
-``requirements.txt``, which is located at vswitchperf repository.
-
-**NOTE:** For RHEL 7.3 Enterprise and CentOS 7.3 OVS Vanilla is not
-built from upstream source due to kernel incompatibilities. Please see the
-instructions in the vswitchperf_design document for details on configuring
-OVS Vanilla for binary package usage.
-
-.. _vpp-installation:
-
-VPP installation
-================
-
-Currently vswitchperf installation scripts do not support automatic build
-of VPP. In order to execute tests with VPP, it is required to install it
-manually. Please refer to the official documentation of `fd.io`_ project to
-install VPP from `packages`_ or from the `sources`_.
-
-See details about :ref:`vpp-test`.
-
-.. _fd.io: https://fd.io/
-.. _packages: https://wiki.fd.io/view/VPP/Installing_VPP_binaries_from_packages
-.. _sources: https://wiki.fd.io/view/VPP/Build,_install,_and_test_images
-
-Using vswitchperf
------------------
-
-You will need to activate the virtual environment every time you start a
-new shell session. Its activation is specific to your OS:
-
-* CentOS 7 and RHEL
-
- .. code:: bash
-
- $ scl enable python33 bash
- $ source $HOME/vsperfenv/bin/activate
-
-* Fedora and Ubuntu
-
- .. code:: bash
-
- $ source $HOME/vsperfenv/bin/activate
-
-After the virtual environment is configued, then VSPERF can be used.
-For example:
-
- .. code:: bash
-
- (vsperfenv) $ cd vswitchperf
- (vsperfenv) $ ./vsperf --help
-
-Gotcha
-======
-
-In case you will see following error during environment activation:
-
-.. code:: bash
-
- $ source $HOME/vsperfenv/bin/activate
- Badly placed ()'s.
-
-then check what type of shell you are using:
-
-.. code:: bash
-
- $ echo $SHELL
- /bin/tcsh
-
-See what scripts are available in $HOME/vsperfenv/bin
-
-.. code:: bash
-
- $ ls $HOME/vsperfenv/bin/
- activate activate.csh activate.fish activate_this.py
-
-source the appropriate script
-
-.. code:: bash
-
- $ source bin/activate.csh
-
-Working Behind a Proxy
-======================
-
-If you're behind a proxy, you'll likely want to configure this before
-running any of the above. For example:
-
- .. code:: bash
-
- export http_proxy=proxy.mycompany.com:123
- export https_proxy=proxy.mycompany.com:123
-
-.. _a link: http://www.softwarecollections.org/en/scls/rhscl/python33/
-.. _virtualenv: https://virtualenv.readthedocs.org/en/latest/
-.. _vloop-vnf-ubuntu-14.04_20160823: http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20160823.qcow2
-.. _vloop-vnf-ubuntu-14.04_20160804: http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20160804.qcow2
-.. _vloop-vnf-ubuntu-14.04_20160303: http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20160303.qcow2
-.. _vloop-vnf-ubuntu-14.04_20151216: http://artifacts.opnfv.org/vswitchperf/vnf/vloop-vnf-ubuntu-14.04_20151216.qcow2
-
-Hugepage Configuration
-----------------------
-
-Systems running vsperf with either dpdk and/or tests with guests must configure
-hugepage amounts to support running these configurations. It is recommended
-to configure 1GB hugepages as the pagesize.
-
-The amount of hugepages needed depends on your configuration files in vsperf.
-Each guest image requires 2048 MB by default according to the default settings
-in the ``04_vnf.conf`` file.
-
-.. code:: bash
-
- GUEST_MEMORY = ['2048']
-
-The dpdk startup parameters also require an amount of hugepages depending on
-your configuration in the ``02_vswitch.conf`` file.
-
-.. code:: bash
-
- DPDK_SOCKET_MEM = ['1024', '0']
-
-**NOTE:** Option ``DPDK_SOCKET_MEM`` is used by all vSwitches with DPDK support.
-It means Open vSwitch, VPP and TestPMD.
-
-VSPerf will verify hugepage amounts are free before executing test
-environments. In case of hugepage amounts not being free, test initialization
-will fail and testing will stop.
-
-**NOTE:** In some instances on a test failure dpdk resources may not
-release hugepages used in dpdk configuration. It is recommended to configure a
-few extra hugepages to prevent a false detection by VSPerf that not enough free
-hugepages are available to execute the test environment. Normally dpdk would use
-previously allocated hugepages upon initialization.
-
-Depending on your OS selection configuration of hugepages may vary. Please refer
-to your OS documentation to set hugepages correctly. It is recommended to set
-the required amount of hugepages to be allocated by default on reboots.
-
-Information on hugepage requirements for dpdk can be found at
-http://dpdk.org/doc/guides/linux_gsg/sys_reqs.html
-
-You can review your hugepage amounts by executing the following command
-
-.. code:: bash
-
- cat /proc/meminfo | grep Huge
-
-If no hugepages are available vsperf will try to automatically allocate some.
-Allocation is controlled by ``HUGEPAGE_RAM_ALLOCATION`` configuration parameter in
-``02_vswitch.conf`` file. Default is 2GB, resulting in either 2 1GB hugepages
-or 1024 2MB hugepages.
diff --git a/docs/testing/user/configguide/trafficgen.rst b/docs/testing/user/configguide/trafficgen.rst
deleted file mode 100644
index 4e42b2be..00000000
--- a/docs/testing/user/configguide/trafficgen.rst
+++ /dev/null
@@ -1,671 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-.. _trafficgen-installation:
-
-===========================
-'vsperf' Traffic Gen Guide
-===========================
-
-Overview
---------
-
-VSPERF supports the following traffic generators:
-
- * Dummy_ (DEFAULT)
- * Ixia_
- * `Spirent TestCenter`_
- * `Xena Networks`_
- * MoonGen_
-
-To see the list of traffic gens from the cli:
-
-.. code-block:: console
-
- $ ./vsperf --list-trafficgens
-
-This guide provides the details of how to install
-and configure the various traffic generators.
-
-Background Information
-----------------------
-The traffic default configuration can be found in **conf/03_traffic.conf**,
-and is configured as follows:
-
-.. code-block:: console
-
- TRAFFIC = {
- 'traffic_type' : 'rfc2544_throughput',
- 'frame_rate' : 100,
- 'bidir' : 'True', # will be passed as string in title format to tgen
- 'multistream' : 0,
- 'stream_type' : 'L4',
- 'pre_installed_flows' : 'No', # used by vswitch implementation
- 'flow_type' : 'port', # used by vswitch implementation
-
- 'l2': {
- 'framesize': 64,
- 'srcmac': '00:00:00:00:00:00',
- 'dstmac': '00:00:00:00:00:00',
- },
- 'l3': {
- 'proto': 'udp',
- 'srcip': '1.1.1.1',
- 'dstip': '90.90.90.90',
- },
- 'l4': {
- 'srcport': 3000,
- 'dstport': 3001,
- },
- 'vlan': {
- 'enabled': False,
- 'id': 0,
- 'priority': 0,
- 'cfi': 0,
- },
- }
-
-The framesize parameter can be overridden from the configuration
-files by adding the following to your custom configuration file
-``10_custom.conf``:
-
-.. code-block:: console
-
- TRAFFICGEN_PKT_SIZES = (64, 128,)
-
-OR from the commandline:
-
-.. code-block:: console
-
- $ ./vsperf --test-params "TRAFFICGEN_PKT_SIZES=(x,y)" $TESTNAME
-
-You can also modify the traffic transmission duration and the number
-of tests run by the traffic generator by extending the example
-commandline above to:
-
-.. code-block:: console
-
- $ ./vsperf --test-params "TRAFFICGEN_PKT_SIZES=(x,y);TRAFFICGEN_DURATION=10;" \
- "TRAFFICGEN_RFC2544_TESTS=1" $TESTNAME
-
-.. _trafficgen-dummy:
-
-Dummy
------
-
-The Dummy traffic generator can be used to test VSPERF installation or
-to demonstrate VSPERF functionality at DUT without connection
-to a real traffic generator.
-
-You could also use the Dummy generator in case, that your external
-traffic generator is not supported by VSPERF. In such case you could
-use VSPERF to setup your test scenario and then transmit the traffic.
-After the transmission is completed you could specify values for all
-collected metrics and VSPERF will use them to generate final reports.
-
-Setup
-~~~~~
-
-To select the Dummy generator please add the following to your
-custom configuration file ``10_custom.conf``.
-
-.. code-block:: console
-
- TRAFFICGEN = 'Dummy'
-
-OR run ``vsperf`` with the ``--trafficgen`` argument
-
-.. code-block:: console
-
- $ ./vsperf --trafficgen Dummy $TESTNAME
-
-Where $TESTNAME is the name of the vsperf test you would like to run.
-This will setup the vSwitch and the VNF (if one is part of your test)
-print the traffic configuration and prompt you to transmit traffic
-when the setup is complete.
-
-.. code-block:: console
-
- Please send 'continuous' traffic with the following stream config:
- 30mS, 90mpps, multistream False
- and the following flow config:
- {
- "flow_type": "port",
- "l3": {
- "srcip": "1.1.1.1",
- "proto": "tcp",
- "dstip": "90.90.90.90"
- },
- "traffic_type": "rfc2544_continuous",
- "multistream": 0,
- "bidir": "True",
- "vlan": {
- "cfi": 0,
- "priority": 0,
- "id": 0,
- "enabled": false
- },
- "frame_rate": 90,
- "l2": {
- "dstport": 3001,
- "srcport": 3000,
- "dstmac": "00:00:00:00:00:00",
- "srcmac": "00:00:00:00:00:00",
- "framesize": 64
- }
- }
- What was the result for 'frames tx'?
-
-When your traffic generator has completed traffic transmission and provided
-the results please input these at the VSPERF prompt. VSPERF will try
-to verify the input:
-
-.. code-block:: console
-
- Is '$input_value' correct?
-
-Please answer with y OR n.
-
-VSPERF will ask you to provide a value for every of collected metrics. The list
-of metrics can be found at traffic-type-metrics_.
-Finally vsperf will print out the results for your test and generate the
-appropriate logs and report files.
-
-.. _traffic-type-metrics:
-
-Metrics collected for supported traffic types
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Below you could find a list of metrics collected by VSPERF for each of supported
-traffic types.
-
-RFC2544 Throughput and Continuous:
-
- * frames tx
- * frames rx
- * min latency
- * max latency
- * avg latency
- * frameloss
-
-RFC2544 Back2back:
-
- * b2b frames
- * b2b frame loss %
-
-Dummy result pre-configuration
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-In case of a Dummy traffic generator it is possible to pre-configure the test
-results. This is useful for creation of demo testcases, which do not require
-a real traffic generator. Such testcase can be run by any user and it will still
-generate all reports and result files.
-
-Result values can be specified within ``TRAFFICGEN_DUMMY_RESULTS`` dictionary,
-where every of collected metrics must be properly defined. Please check the list
-of traffic-type-metrics_.
-
-Dictionary with dummy results can be passed by CLI argument ``--test-params``
-or specified in ``Parameters`` section of testcase definition.
-
-Example of testcase execution with dummy results defined by CLI argument:
-
-.. code-block:: console
-
- $ ./vsperf back2back --trafficgen Dummy --test-params \
- "TRAFFICGEN_DUMMY_RESULTS={'b2b frames':'3000','b2b frame loss %':'0.0'}"
-
-Example of testcase definition with pre-configured dummy results:
-
-.. code-block:: python
-
- {
- "Name": "back2back",
- "Traffic Type": "rfc2544_back2back",
- "Deployment": "p2p",
- "biDirectional": "True",
- "Description": "LTD.Throughput.RFC2544.BackToBackFrames",
- "Parameters" : {
- 'TRAFFICGEN_DUMMY_RESULTS' : {'b2b frames':'3000','b2b frame loss %':'0.0'}
- },
- },
-
-**NOTE:** Pre-configured results for the Dummy traffic generator will be used only
-in case, that the Dummy traffic generator is used. Otherwise the option
-``TRAFFICGEN_DUMMY_RESULTS`` will be ignored.
-
-.. _Ixia:
-
-Ixia
-----
-
-VSPERF can use both IxNetwork and IxExplorer TCL servers to control Ixia chassis.
-However usage of IxNetwork TCL server is a preferred option. Following sections
-will describe installation and configuration of IxNetwork components used by VSPERF.
-
-Installation
-~~~~~~~~~~~~
-
-On the system under the test you need to install IxNetworkTclClient$(VER\_NUM)Linux.bin.tgz.
-
-On the IXIA client software system you need to install IxNetwork TCL server. After its
-installation you should configure it as follows:
-
- 1. Find the IxNetwork TCL server app (start -> All Programs -> IXIA ->
- IxNetwork -> IxNetwork\_$(VER\_NUM) -> IxNetwork TCL Server)
- 2. Right click on IxNetwork TCL Server, select properties - Under shortcut tab in
- the Target dialogue box make sure there is the argument "-tclport xxxx"
- where xxxx is your port number (take note of this port number as you will
- need it for the 10\_custom.conf file).
-
- .. image:: TCLServerProperties.png
-
- 3. Hit Ok and start the TCL server application
-
-VSPERF configuration
-~~~~~~~~~~~~~~~~~~~~
-
-There are several configuration options specific to the IxNetwork traffic generator
-from IXIA. It is essential to set them correctly, before the VSPERF is executed
-for the first time.
-
-Detailed description of options follows:
-
- * ``TRAFFICGEN_IXNET_MACHINE`` - IP address of server, where IxNetwork TCL Server is running
- * ``TRAFFICGEN_IXNET_PORT`` - PORT, where IxNetwork TCL Server is accepting connections from
- TCL clients
- * ``TRAFFICGEN_IXNET_USER`` - username, which will be used during communication with IxNetwork
- TCL Server and IXIA chassis
- * ``TRAFFICGEN_IXIA_HOST`` - IP address of IXIA traffic generator chassis
- * ``TRAFFICGEN_IXIA_CARD`` - identification of card with dedicated ports at IXIA chassis
- * ``TRAFFICGEN_IXIA_PORT1`` - identification of the first dedicated port at ``TRAFFICGEN_IXIA_CARD``
- at IXIA chassis; VSPERF uses two separated ports for traffic generation. In case of
- unidirectional traffic, it is essential to correctly connect 1st IXIA port to the 1st NIC
- at DUT, i.e. to the first PCI handle from ``WHITELIST_NICS`` list. Otherwise traffic may not
- be able to pass through the vSwitch.
- * ``TRAFFICGEN_IXIA_PORT2`` - identification of the second dedicated port at ``TRAFFICGEN_IXIA_CARD``
- at IXIA chassis; VSPERF uses two separated ports for traffic generation. In case of
- unidirectional traffic, it is essential to correctly connect 2nd IXIA port to the 2nd NIC
- at DUT, i.e. to the second PCI handle from ``WHITELIST_NICS`` list. Otherwise traffic may not
- be able to pass through the vSwitch.
- * ``TRAFFICGEN_IXNET_LIB_PATH`` - path to the DUT specific installation of IxNetwork TCL API
- * ``TRAFFICGEN_IXNET_TCL_SCRIPT`` - name of the TCL script, which VSPERF will use for
- communication with IXIA TCL server
- * ``TRAFFICGEN_IXNET_TESTER_RESULT_DIR`` - folder accessible from IxNetwork TCL server,
- where test results are stored, e.g. ``c:/ixia_results``; see test-results-share_
- * ``TRAFFICGEN_IXNET_DUT_RESULT_DIR`` - directory accessible from the DUT, where test
- results from IxNetwork TCL server are stored, e.g. ``/mnt/ixia_results``; see
- test-results-share_
-
-.. _test-results-share:
-
-Test results share
-~~~~~~~~~~~~~~~~~~
-
-VSPERF is not able to retrieve test results via TCL API directly. Instead, all test
-results are stored at IxNetwork TCL server. Results are stored at folder defined by
-``TRAFFICGEN_IXNET_TESTER_RESULT_DIR`` configuration parameter. Content of this
-folder must be shared (e.g. via samba protocol) between TCL Server and DUT, where
-VSPERF is executed. VSPERF expects, that test results will be available at directory
-configured by ``TRAFFICGEN_IXNET_DUT_RESULT_DIR`` configuration parameter.
-
-Example of sharing configuration:
-
- * Create a new folder at IxNetwork TCL server machine, e.g. ``c:\ixia_results``
- * Modify sharing options of ``ixia_results`` folder to share it with everybody
- * Create a new directory at DUT, where shared directory with results
- will be mounted, e.g. ``/mnt/ixia_results``
- * Update your custom VSPERF configuration file as follows:
-
- .. code-block:: python
-
- TRAFFICGEN_IXNET_TESTER_RESULT_DIR = 'c:/ixia_results'
- TRAFFICGEN_IXNET_DUT_RESULT_DIR = '/mnt/ixia_results'
-
- **NOTE:** It is essential to use slashes '/' also in path
- configured by ``TRAFFICGEN_IXNET_TESTER_RESULT_DIR`` parameter.
- * Install cifs-utils package.
-
- e.g. at rpm based Linux distribution:
-
- .. code-block:: console
-
- yum install cifs-utils
-
- * Mount shared directory, so VSPERF can access test results.
-
- e.g. by adding new record into ``/etc/fstab``
-
- .. code-block:: console
-
- mount -t cifs //_TCL_SERVER_IP_OR_FQDN_/ixia_results /mnt/ixia_results
- -o file_mode=0777,dir_mode=0777,nounix
-
-It is recommended to verify, that any new file inserted into ``c:/ixia_results`` folder
-is visible at DUT inside ``/mnt/ixia_results`` directory.
-
-.. _`Spirent TestCenter`:
-
-Spirent Setup
--------------
-
-Spirent installation files and instructions are available on the
-Spirent support website at:
-
-http://support.spirent.com
-
-Select a version of Spirent TestCenter software to utilize. This example
-will use Spirent TestCenter v4.57 as an example. Substitute the appropriate
-version in place of 'v4.57' in the examples, below.
-
-On the CentOS 7 System
-~~~~~~~~~~~~~~~~~~~~~~
-
-Download and install the following:
-
-Spirent TestCenter Application, v4.57 for 64-bit Linux Client
-
-Spirent Virtual Deployment Service (VDS)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Spirent VDS is required for both TestCenter hardware and virtual
-chassis in the vsperf environment. For installation, select the version
-that matches the Spirent TestCenter Application version. For v4.57,
-the matching VDS version is 1.0.55. Download either the ova (VMware)
-or qcow2 (QEMU) image and create a VM with it. Initialize the VM
-according to Spirent installation instructions.
-
-Using Spirent TestCenter Virtual (STCv)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-STCv is available in both ova (VMware) and qcow2 (QEMU) formats. For
-VMware, download:
-
-Spirent TestCenter Virtual Machine for VMware, v4.57 for Hypervisor - VMware ESX.ESXi
-
-Virtual test port performance is affected by the hypervisor configuration. For
-best practice results in deploying STCv, the following is suggested:
-
-- Create a single VM with two test ports rather than two VMs with one port each
-- Set STCv in DPDK mode
-- Give STCv 2*n + 1 cores, where n = the number of ports. For vsperf, cores = 5.
-- Turning off hyperthreading and pinning these cores will improve performance
-- Give STCv 2 GB of RAM
-
-To get the highest performance and accuracy, Spirent TestCenter hardware is
-recommended. vsperf can run with either stype test ports.
-
-Using STC REST Client
-~~~~~~~~~~~~~~~~~~~~~
-The stcrestclient package provides the stchttp.py ReST API wrapper module.
-This allows simple function calls, nearly identical to those provided by
-StcPython.py, to be used to access TestCenter server sessions via the
-STC ReST API. Basic ReST functionality is provided by the resthttp module,
-and may be used for writing ReST clients independent of STC.
-
-- Project page: <https://github.com/Spirent/py-stcrestclient>
-- Package download: <http://pypi.python.org/pypi/stcrestclient>
-
-To use REST interface, follow the instructions in the Project page to
-install the package. Once installed, the scripts named with 'rest' keyword
-can be used. For example: testcenter-rfc2544-rest.py can be used to run
-RFC 2544 tests using the REST interface.
-
-Configuration:
-~~~~~~~~~~~~~~
-
-1. The Labserver and license server addresses. These parameters applies to
- all the tests, and are mandatory for all tests.
-
-.. code-block:: console
-
- TRAFFICGEN_STC_LAB_SERVER_ADDR = " "
- TRAFFICGEN_STC_LICENSE_SERVER_ADDR = " "
- TRAFFICGEN_STC_PYTHON2_PATH = " "
- TRAFFICGEN_STC_TESTCENTER_PATH = " "
- TRAFFICGEN_STC_TEST_SESSION_NAME = " "
- TRAFFICGEN_STC_CSV_RESULTS_FILE_PREFIX = " "
-
-2. For RFC2544 tests, the following parameters are mandatory
-
-.. code-block:: console
-
- TRAFFICGEN_STC_EAST_CHASSIS_ADDR = " "
- TRAFFICGEN_STC_EAST_SLOT_NUM = " "
- TRAFFICGEN_STC_EAST_PORT_NUM = " "
- TRAFFICGEN_STC_EAST_INTF_ADDR = " "
- TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = " "
- TRAFFICGEN_STC_WEST_CHASSIS_ADDR = ""
- TRAFFICGEN_STC_WEST_SLOT_NUM = " "
- TRAFFICGEN_STC_WEST_PORT_NUM = " "
- TRAFFICGEN_STC_WEST_INTF_ADDR = " "
- TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = " "
- TRAFFICGEN_STC_RFC2544_TPUT_TEST_FILE_NAME
-
-3. RFC2889 tests: Currently, the forwarding, address-caching, and
- address-learning-rate tests of RFC2889 are supported.
- The testcenter-rfc2889-rest.py script implements the rfc2889 tests.
- The configuration for RFC2889 involves test-case definition, and parameter
- definition, as described below. New results-constants, as shown below, are
- added to support these tests.
-
-Example of testcase definition for RFC2889 tests:
-
-.. code-block:: python
-
- {
- "Name": "phy2phy_forwarding",
- "Deployment": "p2p",
- "Description": "LTD.Forwarding.RFC2889.MaxForwardingRate",
- "Parameters" : {
- "TRAFFIC" : {
- "traffic_type" : "rfc2889_forwarding",
- },
- },
- }
-
-For RFC2889 tests, specifying the locations for the monitoring ports is mandatory.
-Necessary parameters are:
-
-.. code-block:: console
-
- TRAFFICGEN_STC_RFC2889_TEST_FILE_NAME
- TRAFFICGEN_STC_EAST_CHASSIS_ADDR = " "
- TRAFFICGEN_STC_EAST_SLOT_NUM = " "
- TRAFFICGEN_STC_EAST_PORT_NUM = " "
- TRAFFICGEN_STC_EAST_INTF_ADDR = " "
- TRAFFICGEN_STC_EAST_INTF_GATEWAY_ADDR = " "
- TRAFFICGEN_STC_WEST_CHASSIS_ADDR = ""
- TRAFFICGEN_STC_WEST_SLOT_NUM = " "
- TRAFFICGEN_STC_WEST_PORT_NUM = " "
- TRAFFICGEN_STC_WEST_INTF_ADDR = " "
- TRAFFICGEN_STC_WEST_INTF_GATEWAY_ADDR = " "
- TRAFFICGEN_STC_VERBOSE = "True"
- TRAFFICGEN_STC_RFC2889_LOCATIONS="//10.1.1.1/1/1,//10.1.1.1/2/2"
-
-Other Configurations are :
-
-.. code-block:: console
-
- TRAFFICGEN_STC_RFC2889_MIN_LR = 1488
- TRAFFICGEN_STC_RFC2889_MAX_LR = 14880
- TRAFFICGEN_STC_RFC2889_MIN_ADDRS = 1000
- TRAFFICGEN_STC_RFC2889_MAX_ADDRS = 65536
- TRAFFICGEN_STC_RFC2889_AC_LR = 1000
-
-The first 2 values are for address-learning test where as other 3 values are
-for the Address caching capacity test. LR: Learning Rate. AC: Address Caching.
-Maximum value for address is 16777216. Whereas, maximum for LR is 4294967295.
-
-Results for RFC2889 Tests: Forwarding tests outputs following values:
-
-.. code-block:: console
-
- TX_RATE_FPS : "Transmission Rate in Frames/sec"
- THROUGHPUT_RX_FPS: "Received Throughput Frames/sec"
- TX_RATE_MBPS : " Transmission rate in MBPS"
- THROUGHPUT_RX_MBPS: "Received Throughput in MBPS"
- TX_RATE_PERCENT: "Transmission Rate in Percentage"
- FRAME_LOSS_PERCENT: "Frame loss in Percentage"
- FORWARDING_RATE_FPS: " Maximum Forwarding Rate in FPS"
-
-
-Whereas, the address caching test outputs following values,
-
-.. code-block:: console
-
- CACHING_CAPACITY_ADDRS = 'Number of address it can cache'
- ADDR_LEARNED_PERCENT = 'Percentage of address successfully learned'
-
-and address learning test outputs just a single value:
-
-.. code-block:: console
-
- OPTIMAL_LEARNING_RATE_FPS = 'Optimal learning rate in fps'
-
-Note that 'FORWARDING_RATE_FPS', 'CACHING_CAPACITY_ADDRS',
-'ADDR_LEARNED_PERCENT' and 'OPTIMAL_LEARNING_RATE_FPS' are the new
-result-constants added to support RFC2889 tests.
-
-.. _`Xena Networks`:
-
-Xena Networks
--------------
-
-Installation
-~~~~~~~~~~~~
-
-Xena Networks traffic generator requires specific files and packages to be
-installed. It is assumed the user has access to the Xena2544.exe file which
-must be placed in VSPerf installation location under the tools/pkt_gen/xena
-folder. Contact Xena Networks for the latest version of this file. The user
-can also visit www.xenanetworks/downloads to obtain the file with a valid
-support contract.
-
-**Note** VSPerf has been fully tested with version v2.43 of Xena2544.exe
-
-To execute the Xena2544.exe file under Linux distributions the mono-complete
-package must be installed. To install this package follow the instructions
-below. Further information can be obtained from
-http://www.mono-project.com/docs/getting-started/install/linux/
-
-.. code-block:: console
-
- rpm --import "http://keyserver.ubuntu.com/pks/lookup?op=get&search=0x3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF"
- yum-config-manager --add-repo http://download.mono-project.com/repo/centos/
- yum -y install mono-complete
-
-To prevent gpg errors on future yum installation of packages the mono-project
-repo should be disabled once installed.
-
-.. code-block:: console
-
- yum-config-manager --disable download.mono-project.com_repo_centos_
-
-Configuration
-~~~~~~~~~~~~~
-
-Connection information for your Xena Chassis must be supplied inside the
-``10_custom.conf`` or ``03_custom.conf`` file. The following parameters must be
-set to allow for proper connections to the chassis.
-
-.. code-block:: console
-
- TRAFFICGEN_XENA_IP = ''
- TRAFFICGEN_XENA_PORT1 = ''
- TRAFFICGEN_XENA_PORT2 = ''
- TRAFFICGEN_XENA_USER = ''
- TRAFFICGEN_XENA_PASSWORD = ''
- TRAFFICGEN_XENA_MODULE1 = ''
- TRAFFICGEN_XENA_MODULE2 = ''
-
-RFC2544 Throughput Testing
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Xena traffic generator testing for rfc2544 throughput can be modified for
-different behaviors if needed. The default options for the following are
-optimized for best results.
-
-.. code-block:: console
-
- TRAFFICGEN_XENA_2544_TPUT_INIT_VALUE = '10.0'
- TRAFFICGEN_XENA_2544_TPUT_MIN_VALUE = '0.1'
- TRAFFICGEN_XENA_2544_TPUT_MAX_VALUE = '100.0'
- TRAFFICGEN_XENA_2544_TPUT_VALUE_RESOLUTION = '0.5'
- TRAFFICGEN_XENA_2544_TPUT_USEPASS_THRESHHOLD = 'false'
- TRAFFICGEN_XENA_2544_TPUT_PASS_THRESHHOLD = '0.0'
-
-Each value modifies the behavior of rfc 2544 throughput testing. Refer to your
-Xena documentation to understand the behavior changes in modifying these
-values.
-
-Continuous Traffic Testing
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Xena continuous traffic by default does a 3 second learning preemption to allow
-the DUT to receive learning packets before a continuous test is performed. If
-a custom test case requires this learning be disabled, you can disable the option
-or modify the length of the learning by modifying the following settings.
-
-.. code-block:: console
-
- TRAFFICGEN_XENA_CONT_PORT_LEARNING_ENABLED = False
- TRAFFICGEN_XENA_CONT_PORT_LEARNING_DURATION = 3
-
-MoonGen
--------
-
-Installation
-~~~~~~~~~~~~
-
-MoonGen architecture overview and general installation instructions
-can be found here:
-
-https://github.com/emmericp/MoonGen
-
-* Note: Today, MoonGen with VSPERF only supports 10Gbps line speeds.
-
-For VSPERF use, MoonGen should be cloned from here (as opposed to the
-previously mentioned GitHub):
-
-git clone https://github.com/atheurer/lua-trafficgen
-
-and use the master branch:
-
-git checkout master
-
-VSPERF uses a particular Lua script with the MoonGen project:
-
-trafficgen.lua
-
-Follow MoonGen set up and execution instructions here:
-
-https://github.com/atheurer/lua-trafficgen/blob/master/README.md
-
-Note one will need to set up ssh login to not use passwords between the server
-running MoonGen and the device under test (running the VSPERF test
-infrastructure). This is because VSPERF on one server uses 'ssh' to
-configure and run MoonGen upon the other server.
-
-One can set up this ssh access by doing the following on both servers:
-
-.. code-block:: console
-
- ssh-keygen -b 2048 -t rsa
- ssh-copy-id <other server>
-
-Configuration
-~~~~~~~~~~~~~
-
-Connection information for MoonGen must be supplied inside the
-``10_custom.conf`` or ``03_custom.conf`` file. The following parameters must be
-set to allow for proper connections to the host with MoonGen.
-
-.. code-block:: console
-
- TRAFFICGEN_MOONGEN_HOST_IP_ADDR = ""
- TRAFFICGEN_MOONGEN_USER = ""
- TRAFFICGEN_MOONGEN_BASE_DIR = ""
- TRAFFICGEN_MOONGEN_PORTS = ""
- TRAFFICGEN_MOONGEN_LINE_SPEED_GBPS = ""
diff --git a/docs/testing/user/configguide/upgrade.rst b/docs/testing/user/configguide/upgrade.rst
deleted file mode 100644
index cf92572c..00000000
--- a/docs/testing/user/configguide/upgrade.rst
+++ /dev/null
@@ -1,183 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-=====================
-Upgrading vswitchperf
-=====================
-
-Generic
--------
-
-In case, that VSPERF is cloned from git repository, then it is easy to
-upgrade it to the newest stable version or to the development version.
-
-You could get a list of stable releases by ``git`` command. It is necessary
-to update local git repository first.
-
-**NOTE:** Git commands must be executed from directory, where VSPERF repository
-was cloned, e.g. ``vswitchperf``.
-
-Update of local git repository:
-
-.. code:: bash
-
- $ git pull
-
-List of stable releases:
-
-.. code:: bash
-
- $ git tag
-
- brahmaputra.1.0
- colorado.1.0
- colorado.2.0
- colorado.3.0
- danube.1.0
-
-You could select which stable release should be used. For example, select ``danube.1.0``:
-
-.. code:: bash
-
- $ git checkout danube.1.0
-
-
-Development version of VSPERF can be selected by:
-
-.. code:: bash
-
- $ git checkout master
-
-Colorado to Danube upgrade notes
---------------------------------
-
-Obsoleted features
-~~~~~~~~~~~~~~~~~~
-
-Support of vHost Cuse interface has been removed in Danube release. It means,
-that it is not possible to select ``QemuDpdkVhostCuse`` as a VNF anymore. Option
-``QemuDpdkVhostUser`` should be used instead. Please check you configuration files
-and definition of your testcases for any occurrence of:
-
-.. code:: python
-
- VNF = "QemuDpdkVhostCuse"
-
-or
-
-.. code:: python
-
- "VNF" : "QemuDpdkVhostCuse"
-
-In case that ``QemuDpdkVhostCuse`` is found, it must be modified to ``QemuDpdkVhostUser``.
-
-**NOTE:** In case that execution of VSPERF is automated by scripts (e.g. for
-CI purposes), then these scripts must be checked and updated too. It means,
-that any occurrence of:
-
-.. code:: bash
-
- ./vsperf --vnf QemuDpdkVhostCuse
-
-must be updated to:
-
-.. code:: bash
-
- ./vsperf --vnf QemuDpdkVhostUser
-
-Configuration
-~~~~~~~~~~~~~
-
-Several configuration changes were introduced during Danube release. The most
-important changes are discussed below.
-
-Paths to DPDK, OVS and QEMU
-===========================
-
-VSPERF uses external tools for proper testcase execution. Thus it is important
-to properly configure paths to these tools. In case that tools are installed
-by installation scripts and are located inside ``./src`` directory inside
-VSPERF home, then no changes are needed. On the other hand, if path settings
-was changed by custom configuration file, then it is required to update configuration
-accordingly. Please check your configuration files for following configuration
-options:
-
-.. code:: bash
-
- OVS_DIR
- OVS_DIR_VANILLA
- OVS_DIR_USER
- OVS_DIR_CUSE
-
- RTE_SDK_USER
- RTE_SDK_CUSE
-
- QEMU_DIR
- QEMU_DIR_USER
- QEMU_DIR_CUSE
- QEMU_BIN
-
-In case that any of these options is defined, then configuration must be updated.
-All paths to the tools are now stored inside ``PATHS`` dictionary. Please
-refer to the :ref:`paths-documentation` and update your configuration where necessary.
-
-Configuration change via CLI
-============================
-
-In previous releases it was possible to modify selected configuration options
-(mostly VNF specific) via command line interface, i.e. by ``--test-params``
-argument. This concept has been generalized in Danube release and it is
-possible to modify any configuration parameter via CLI or via **Parameters**
-section of the testcase definition. Old configuration options were obsoleted
-and it is required to specify configuration parameter name in the same form
-as it is defined inside configuration file, i.e. in uppercase. Please
-refer to the :ref:`overriding-parameters-documentation` for additional details.
-
-**NOTE:** In case that execution of VSPERF is automated by scripts (e.g. for
-CI purposes), then these scripts must be checked and updated too. It means,
-that any occurrence of
-
-.. code:: bash
-
- guest_loopback
- vanilla_tgen_port1_ip
- vanilla_tgen_port1_mac
- vanilla_tgen_port2_ip
- vanilla_tgen_port2_mac
- tunnel_type
-
-shall be changed to the uppercase form and data type of entered values must
-match to data types of original values from configuration files.
-
-In case that ``guest_nic1_name`` or ``guest_nic2_name`` is changed,
-then new dictionary ``GUEST_NICS`` must be modified accordingly.
-Please see :ref:`configuration-of-guest-options` and ``conf/04_vnf.conf`` for additional
-details.
-
-Traffic configuration via CLI
-=============================
-
-In previous releases it was possible to modify selected attributes of generated
-traffic via command line interface. This concept has been enhanced in Danube
-release and it is now possible to modify all traffic specific options via
-CLI or by ``TRAFFIC`` dictionary in configuration file. Detailed description
-is available at :ref:`configuration-of-traffic-dictionary` section of documentation.
-
-Please check your automated scripts for VSPERF execution for following CLI
-parameters and update them according to the documentation:
-
-.. code:: bash
-
- bidir
- duration
- frame_rate
- iload
- lossrate
- multistream
- pkt_sizes
- pre-installed_flows
- rfc2544_tests
- stream_type
- traffic_type
-
diff --git a/docs/testing/user/userguide/integration.rst b/docs/testing/user/userguide/integration.rst
deleted file mode 100644
index 83b29da6..00000000
--- a/docs/testing/user/userguide/integration.rst
+++ /dev/null
@@ -1,504 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-.. _integration-tests:
-
-Integration tests
-=================
-
-VSPERF includes a set of integration tests defined in conf/integration.
-These tests can be run by specifying --integration as a parameter to vsperf.
-Current tests in conf/integration include switch functionality and Overlay
-tests.
-
-Tests in the conf/integration can be used to test scaling of different switch
-configurations by adding steps into the test case.
-
-For the overlay tests VSPERF supports VXLAN, GRE and GENEVE tunneling protocols.
-Testing of these protocols is limited to unidirectional traffic and
-P2P (Physical to Physical scenarios).
-
-NOTE: The configuration for overlay tests provided in this guide is for
-unidirectional traffic only.
-
-Executing Integration Tests
----------------------------
-
-To execute integration tests VSPERF is run with the integration parameter. To
-view the current test list simply execute the following command:
-
-.. code-block:: console
-
- ./vsperf --integration --list
-
-The standard tests included are defined inside the
-``conf/integration/01_testcases.conf`` file.
-
-Executing Tunnel encapsulation tests
-------------------------------------
-
-The VXLAN OVS DPDK encapsulation tests requires IPs, MAC addresses,
-bridge names and WHITELIST_NICS for DPDK.
-
-NOTE: Only Ixia traffic generators currently support the execution of the tunnel
-encapsulation tests. Support for other traffic generators may come in a future
-release.
-
-Default values are already provided. To customize for your environment, override
-the following variables in you user_settings.py file:
-
- .. code-block:: python
-
- # Variables defined in conf/integration/02_vswitch.conf
- # Tunnel endpoint for Overlay P2P deployment scenario
- # used for br0
- VTEP_IP1 = '192.168.0.1/24'
-
- # Used as remote_ip in adding OVS tunnel port and
- # to set ARP entry in OVS (e.g. tnl/arp/set br-ext 192.168.240.10 02:00:00:00:00:02
- VTEP_IP2 = '192.168.240.10'
-
- # Network to use when adding a route for inner frame data
- VTEP_IP2_SUBNET = '192.168.240.0/24'
-
- # Bridge names
- TUNNEL_INTEGRATION_BRIDGE = 'br0'
- TUNNEL_EXTERNAL_BRIDGE = 'br-ext'
-
- # IP of br-ext
- TUNNEL_EXTERNAL_BRIDGE_IP = '192.168.240.1/24'
-
- # vxlan|gre|geneve
- TUNNEL_TYPE = 'vxlan'
-
- # Variables defined conf/integration/03_traffic.conf
- # For OP2P deployment scenario
- TRAFFICGEN_PORT1_MAC = '02:00:00:00:00:01'
- TRAFFICGEN_PORT2_MAC = '02:00:00:00:00:02'
- TRAFFICGEN_PORT1_IP = '1.1.1.1'
- TRAFFICGEN_PORT2_IP = '192.168.240.10'
-
-To run VXLAN encapsulation tests:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration \
- --test-params 'TUNNEL_TYPE=vxlan' overlay_p2p_tput
-
-To run GRE encapsulation tests:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration \
- --test-params 'TUNNEL_TYPE=gre' overlay_p2p_tput
-
-To run GENEVE encapsulation tests:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration \
- --test-params 'TUNNEL_TYPE=geneve' overlay_p2p_tput
-
-To run OVS NATIVE tunnel tests (VXLAN/GRE/GENEVE):
-
-1. Install the OVS kernel modules
-
- .. code:: console
-
- cd src/ovs/ovs
- sudo -E make modules_install
-
-2. Set the following variables:
-
- .. code-block:: python
-
- VSWITCH = 'OvsVanilla'
- # Specify vport_* kernel module to test.
- PATHS['vswitch']['OvsVanilla']['src']['modules'] = [
- 'vport_vxlan',
- 'vport_gre',
- 'vport_geneve',
- 'datapath/linux/openvswitch.ko',
- ]
-
- **NOTE:** In case, that Vanilla OVS is installed from binary package, then
- please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead.
-
-3. Run tests:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration \
- --test-params 'TUNNEL_TYPE=vxlan' overlay_p2p_tput
-
-
-Executing VXLAN decapsulation tests
-------------------------------------
-
-To run VXLAN decapsulation tests:
-
-1. Set the variables used in "Executing Tunnel encapsulation tests"
-
-2. Set dstmac of DUT_NIC2_MAC to the MAC adddress of the 2nd NIC of your DUT
-
- .. code-block:: python
-
- DUT_NIC2_MAC = '<DUT NIC2 MAC>'
-
-3. Run test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration overlay_p2p_decap_cont
-
-If you want to use different values for your VXLAN frame, you may set:
-
- .. code-block:: python
-
- VXLAN_FRAME_L3 = {'proto': 'udp',
- 'packetsize': 64,
- 'srcip': TRAFFICGEN_PORT1_IP,
- 'dstip': '192.168.240.1',
- }
- VXLAN_FRAME_L4 = {'srcport': 4789,
- 'dstport': 4789,
- 'vni': VXLAN_VNI,
- 'inner_srcmac': '01:02:03:04:05:06',
- 'inner_dstmac': '06:05:04:03:02:01',
- 'inner_srcip': '192.168.0.10',
- 'inner_dstip': '192.168.240.9',
- 'inner_proto': 'udp',
- 'inner_srcport': 3000,
- 'inner_dstport': 3001,
- }
-
-
-Executing GRE decapsulation tests
----------------------------------
-
-To run GRE decapsulation tests:
-
-1. Set the variables used in "Executing Tunnel encapsulation tests"
-
-2. Set dstmac of DUT_NIC2_MAC to the MAC adddress of the 2nd NIC of your DUT
-
- .. code-block:: python
-
- DUT_NIC2_MAC = '<DUT NIC2 MAC>'
-
-3. Run test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --test-params 'TUNNEL_TYPE=gre' \
- --integration overlay_p2p_decap_cont
-
-
-If you want to use different values for your GRE frame, you may set:
-
- .. code-block:: python
-
- GRE_FRAME_L3 = {'proto': 'gre',
- 'packetsize': 64,
- 'srcip': TRAFFICGEN_PORT1_IP,
- 'dstip': '192.168.240.1',
- }
-
- GRE_FRAME_L4 = {'srcport': 0,
- 'dstport': 0
- 'inner_srcmac': '01:02:03:04:05:06',
- 'inner_dstmac': '06:05:04:03:02:01',
- 'inner_srcip': '192.168.0.10',
- 'inner_dstip': '192.168.240.9',
- 'inner_proto': 'udp',
- 'inner_srcport': 3000,
- 'inner_dstport': 3001,
- }
-
-
-Executing GENEVE decapsulation tests
-------------------------------------
-
-IxNet 7.3X does not have native support of GENEVE protocol. The
-template, GeneveIxNetTemplate.xml_ClearText.xml, should be imported
-into IxNET for this testcase to work.
-
-To import the template do:
-
-1. Run the IxNetwork TCL Server
-2. Click on the Traffic menu
-3. Click on the Traffic actions and click Edit Packet Templates
-4. On the Template editor window, click Import. Select the template
- located at ``3rd_party/ixia/GeneveIxNetTemplate.xml_ClearText.xml``
- and click import.
-5. Restart the TCL Server.
-
-To run GENEVE decapsulation tests:
-
-1. Set the variables used in "Executing Tunnel encapsulation tests"
-
-2. Set dstmac of DUT_NIC2_MAC to the MAC adddress of the 2nd NIC of your DUT
-
- .. code-block:: python
-
- DUT_NIC2_MAC = '<DUT NIC2 MAC>'
-
-3. Run test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --test-params 'tunnel_type=geneve' \
- --integration overlay_p2p_decap_cont
-
-
-If you want to use different values for your GENEVE frame, you may set:
-
- .. code-block:: python
-
- GENEVE_FRAME_L3 = {'proto': 'udp',
- 'packetsize': 64,
- 'srcip': TRAFFICGEN_PORT1_IP,
- 'dstip': '192.168.240.1',
- }
-
- GENEVE_FRAME_L4 = {'srcport': 6081,
- 'dstport': 6081,
- 'geneve_vni': 0,
- 'inner_srcmac': '01:02:03:04:05:06',
- 'inner_dstmac': '06:05:04:03:02:01',
- 'inner_srcip': '192.168.0.10',
- 'inner_dstip': '192.168.240.9',
- 'inner_proto': 'udp',
- 'inner_srcport': 3000,
- 'inner_dstport': 3001,
- }
-
-
-Executing Native/Vanilla OVS VXLAN decapsulation tests
-------------------------------------------------------
-
-To run VXLAN decapsulation tests:
-
-1. Set the following variables in your user_settings.py file:
-
- .. code-block:: python
-
- PATHS['vswitch']['OvsVanilla']['src']['modules'] = [
- 'vport_vxlan',
- 'datapath/linux/openvswitch.ko',
- ]
-
- DUT_NIC1_MAC = '<DUT NIC1 MAC ADDRESS>'
-
- TRAFFICGEN_PORT1_IP = '172.16.1.2'
- TRAFFICGEN_PORT2_IP = '192.168.1.11'
-
- VTEP_IP1 = '172.16.1.2/24'
- VTEP_IP2 = '192.168.1.1'
- VTEP_IP2_SUBNET = '192.168.1.0/24'
- TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24'
- TUNNEL_INT_BRIDGE_IP = '192.168.1.1'
-
- VXLAN_FRAME_L2 = {'srcmac':
- '01:02:03:04:05:06',
- 'dstmac': DUT_NIC1_MAC
- }
-
- VXLAN_FRAME_L3 = {'proto': 'udp',
- 'packetsize': 64,
- 'srcip': TRAFFICGEN_PORT1_IP,
- 'dstip': '172.16.1.1',
- }
-
- VXLAN_FRAME_L4 = {
- 'srcport': 4789,
- 'dstport': 4789,
- 'protocolpad': 'true',
- 'vni': 99,
- 'inner_srcmac': '01:02:03:04:05:06',
- 'inner_dstmac': '06:05:04:03:02:01',
- 'inner_srcip': '192.168.1.2',
- 'inner_dstip': TRAFFICGEN_PORT2_IP,
- 'inner_proto': 'udp',
- 'inner_srcport': 3000,
- 'inner_dstport': 3001,
- }
-
- **NOTE:** In case, that Vanilla OVS is installed from binary package, then
- please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead.
-
-2. Run test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration \
- --test-params 'tunnel_type=vxlan' overlay_p2p_decap_cont
-
-Executing Native/Vanilla OVS GRE decapsulation tests
-----------------------------------------------------
-
-To run GRE decapsulation tests:
-
-1. Set the following variables in your user_settings.py file:
-
- .. code-block:: python
-
- PATHS['vswitch']['OvsVanilla']['src']['modules'] = [
- 'vport_gre',
- 'datapath/linux/openvswitch.ko',
- ]
-
- DUT_NIC1_MAC = '<DUT NIC1 MAC ADDRESS>'
-
- TRAFFICGEN_PORT1_IP = '172.16.1.2'
- TRAFFICGEN_PORT2_IP = '192.168.1.11'
-
- VTEP_IP1 = '172.16.1.2/24'
- VTEP_IP2 = '192.168.1.1'
- VTEP_IP2_SUBNET = '192.168.1.0/24'
- TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24'
- TUNNEL_INT_BRIDGE_IP = '192.168.1.1'
-
- GRE_FRAME_L2 = {'srcmac':
- '01:02:03:04:05:06',
- 'dstmac': DUT_NIC1_MAC
- }
-
- GRE_FRAME_L3 = {'proto': 'udp',
- 'packetsize': 64,
- 'srcip': TRAFFICGEN_PORT1_IP,
- 'dstip': '172.16.1.1',
- }
-
- GRE_FRAME_L4 = {
- 'srcport': 4789,
- 'dstport': 4789,
- 'protocolpad': 'true',
- 'inner_srcmac': '01:02:03:04:05:06',
- 'inner_dstmac': '06:05:04:03:02:01',
- 'inner_srcip': '192.168.1.2',
- 'inner_dstip': TRAFFICGEN_PORT2_IP,
- 'inner_proto': 'udp',
- 'inner_srcport': 3000,
- 'inner_dstport': 3001,
- }
-
- **NOTE:** In case, that Vanilla OVS is installed from binary package, then
- please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead.
-
-2. Run test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration \
- --test-params 'tunnel_type=gre' overlay_p2p_decap_cont
-
-Executing Native/Vanilla OVS GENEVE decapsulation tests
--------------------------------------------------------
-
-To run GENEVE decapsulation tests:
-
-1. Set the following variables in your user_settings.py file:
-
- .. code-block:: python
-
- PATHS['vswitch']['OvsVanilla']['src']['modules'] = [
- 'vport_geneve',
- 'datapath/linux/openvswitch.ko',
- ]
-
- DUT_NIC1_MAC = '<DUT NIC1 MAC ADDRESS>'
-
- TRAFFICGEN_PORT1_IP = '172.16.1.2'
- TRAFFICGEN_PORT2_IP = '192.168.1.11'
-
- VTEP_IP1 = '172.16.1.2/24'
- VTEP_IP2 = '192.168.1.1'
- VTEP_IP2_SUBNET = '192.168.1.0/24'
- TUNNEL_EXTERNAL_BRIDGE_IP = '172.16.1.1/24'
- TUNNEL_INT_BRIDGE_IP = '192.168.1.1'
-
- GENEVE_FRAME_L2 = {'srcmac':
- '01:02:03:04:05:06',
- 'dstmac': DUT_NIC1_MAC
- }
-
- GENEVE_FRAME_L3 = {'proto': 'udp',
- 'packetsize': 64,
- 'srcip': TRAFFICGEN_PORT1_IP,
- 'dstip': '172.16.1.1',
- }
-
- GENEVE_FRAME_L4 = {'srcport': 6081,
- 'dstport': 6081,
- 'protocolpad': 'true',
- 'geneve_vni': 0,
- 'inner_srcmac': '01:02:03:04:05:06',
- 'inner_dstmac': '06:05:04:03:02:01',
- 'inner_srcip': '192.168.1.2',
- 'inner_dstip': TRAFFICGEN_PORT2_IP,
- 'inner_proto': 'udp',
- 'inner_srcport': 3000,
- 'inner_dstport': 3001,
- }
-
- **NOTE:** In case, that Vanilla OVS is installed from binary package, then
- please set ``PATHS['vswitch']['OvsVanilla']['bin']['modules']`` instead.
-
-2. Run test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration \
- --test-params 'tunnel_type=geneve' overlay_p2p_decap_cont
-
-
-Executing Tunnel encapsulation+decapsulation tests
---------------------------------------------------
-
-The OVS DPDK encapsulation_decapsulation tests requires IPs, MAC addresses,
-bridge names and WHITELIST_NICS for DPDK.
-
-The test cases can test the tunneling encap and decap without using any ingress
-overlay traffic as compared to above test cases. To achieve this the OVS is
-configured to perform encap and decap in a series on the same traffic stream as
-given below.
-
-TRAFFIC-IN --> [ENCAP] --> [MOD-PKT] --> [DECAP] --> TRAFFIC-OUT
-
-
-Default values are already provided. To customize for your environment, override
-the following variables in you user_settings.py file:
-
- .. code-block:: python
-
- # Variables defined in conf/integration/02_vswitch.conf
-
- # Bridge names
- TUNNEL_EXTERNAL_BRIDGE1 = 'br-phy1'
- TUNNEL_EXTERNAL_BRIDGE2 = 'br-phy2'
- TUNNEL_MODIFY_BRIDGE1 = 'br-mod1'
- TUNNEL_MODIFY_BRIDGE2 = 'br-mod2'
-
- # IP of br-mod1
- TUNNEL_MODIFY_BRIDGE_IP1 = '10.0.0.1/24'
-
- # Mac of br-mod1
- TUNNEL_MODIFY_BRIDGE_MAC1 = '00:00:10:00:00:01'
-
- # IP of br-mod2
- TUNNEL_MODIFY_BRIDGE_IP2 = '20.0.0.1/24'
-
- #Mac of br-mod2
- TUNNEL_MODIFY_BRIDGE_MAC2 = '00:00:20:00:00:01'
-
- # vxlan|gre|geneve, Only VXLAN is supported for now.
- TUNNEL_TYPE = 'vxlan'
-
-To run VXLAN encapsulation+decapsulation tests:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration \
- overlay_p2p_mod_tput
diff --git a/docs/testing/user/userguide/teststeps.rst b/docs/testing/user/userguide/teststeps.rst
deleted file mode 100644
index 870c3d80..00000000
--- a/docs/testing/user/userguide/teststeps.rst
+++ /dev/null
@@ -1,667 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-.. _step-driven-tests:
-
-Step driven tests
-=================
-
-In general, test scenarios are defined by a ``deployment`` used in the particular
-test case definition. The chosen deployment scenario will take care of the vSwitch
-configuration, deployment of VNFs and it can also affect configuration of a traffic
-generator. In order to allow a more flexible way of testcase scripting, VSPERF supports
-a detailed step driven testcase definition. It can be used to configure and
-program vSwitch, deploy and terminate VNFs, execute a traffic generator,
-modify a VSPERF configuration, execute external commands, etc.
-
-Execution of step driven tests is done on a step by step work flow starting
-with step 0 as defined inside the test case. Each step of the test increments
-the step number by one which is indicated in the log.
-
-.. code-block:: console
-
- (testcases.integration) - Step 0 'vswitch add_vport ['br0']' start
-
-Step driven tests can be used for both performance and integration testing.
-In case of integration test, each step in the test case is validated. If a step
-does not pass validation the test will fail and terminate. The test will continue
-until a failure is detected or all steps pass. A csv report file is generated after
-a test completes with an OK or FAIL result.
-
-In case of performance test, the validation of steps is not performed and
-standard output files with results from traffic generator and underlying OS
-details are generated by vsperf.
-
-Step driven testcases can be used in two different ways:
-
- # description of full testcase - in this case ``clean`` deployment is used
- to indicate that vsperf should neither configure vSwitch nor deploy any VNF.
- Test shall perform all required vSwitch configuration and programming and
- deploy required number of VNFs.
-
- # modification of existing deployment - in this case, any of supported
- deployments can be used to perform initial vSwitch configuration and
- deployment of VNFs. Additional actions defined by TestSteps can be used
- to alter vSwitch configuration or deploy additional VNFs. After the last
- step is processed, the test execution will continue with traffic execution.
-
-Test objects and their functions
---------------------------------
-
-Every test step can call a function of one of the supported test objects. The list
-of supported objects and their most common functions follows:
-
- * ``vswitch`` - provides functions for vSwitch configuration
-
- List of supported functions:
-
- * ``add_switch br_name`` - creates a new switch (bridge) with given ``br_name``
- * ``del_switch br_name`` - deletes switch (bridge) with given ``br_name``
- * ``add_phy_port br_name`` - adds a physical port into bridge specified by ``br_name``
- * ``add_vport br_name`` - adds a virtual port into bridge specified by ``br_name``
- * ``del_port br_name port_name`` - removes physical or virtual port specified by
- ``port_name`` from bridge ``br_name``
- * ``add_flow br_name flow`` - adds flow specified by ``flow`` dictionary into
- the bridge ``br_name``; Content of flow dictionary will be passed to the vSwitch.
- In case of Open vSwitch it will be passed to the ``ovs-ofctl add-flow`` command.
- Please see Open vSwitch documentation for the list of supported flow parameters.
- * ``del_flow br_name [flow]`` - deletes flow specified by ``flow`` dictionary from
- bridge ``br_name``; In case that optional parameter ``flow`` is not specified
- or set to an empty dictionary ``{}``, then all flows from bridge ``br_name``
- will be deleted.
- * ``dump_flows br_name`` - dumps all flows from bridge specified by ``br_name``
- * ``enable_stp br_name`` - enables Spanning Tree Protocol for bridge ``br_name``
- * ``disable_stp br_name`` - disables Spanning Tree Protocol for bridge ``br_name``
- * ``enable_rstp br_name`` - enables Rapid Spanning Tree Protocol for bridge ``br_name``
- * ``disable_rstp br_name`` - disables Rapid Spanning Tree Protocol for bridge ``br_name``
-
- Examples:
-
- .. code-block:: python
-
- ['vswitch', 'add_switch', 'int_br0']
-
- ['vswitch', 'del_switch', 'int_br0']
-
- ['vswitch', 'add_phy_port', 'int_br0']
-
- ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]']
-
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '1', 'actions': ['output:2'],
- 'idle_timeout': '0'}],
-
- ['vswitch', 'enable_rstp', 'int_br0']
-
- * ``vnf[ID]`` - provides functions for deployment and termination of VNFs; Optional
- alfanumerical ``ID`` is used for VNF identification in case that testcase
- deploys multiple VNFs.
-
- List of supported functions:
-
- * ``start`` - starts a VNF based on VSPERF configuration
- * ``stop`` - gracefully terminates given VNF
-
- Examples:
-
- .. code-block:: python
-
- ['vnf1', 'start']
- ['vnf2', 'start']
- ['vnf2', 'stop']
- ['vnf1', 'stop']
-
- * ``trafficgen`` - triggers traffic generation
-
- List of supported functions:
-
- * ``send_traffic traffic`` - starts a traffic based on the vsperf configuration
- and given ``traffic`` dictionary. More details about ``traffic`` dictionary
- and its possible values are available at :ref:`Traffic Generator Integration Guide
- <step-5-supported-traffic-types>`
-
- Examples:
-
- .. code-block:: python
-
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_throughput'}]
-
- ['trafficgen', 'send_traffic', {'traffic_type' : 'rfc2544_back2back', 'bidir' : 'True'}]
-
- * ``settings`` - reads or modifies VSPERF configuration
-
- List of supported functions:
-
- * ``getValue param`` - returns value of given ``param``
- * ``setValue param value`` - sets value of ``param`` to given ``value``
-
- Examples:
-
- .. code-block:: python
-
- ['settings', 'getValue', 'TOOLS']
-
- ['settings', 'setValue', 'GUEST_USERNAME', ['root']]
-
- * ``namespace`` - creates or modifies network namespaces
-
- List of supported functions:
-
- * ``create_namespace name`` - creates new namespace with given ``name``
- * ``delete_namespace name`` - deletes namespace specified by its ``name``
- * ``assign_port_to_namespace port name [port_up]`` - assigns NIC specified by ``port``
- into given namespace ``name``; If optional parameter ``port_up`` is set to ``True``,
- then port will be brought up.
- * ``add_ip_to_namespace_eth port name addr cidr`` - assigns an IP address ``addr``/``cidr``
- to the NIC specified by ``port`` within namespace ``name``
- * ``reset_port_to_root port name`` - returns given ``port`` from namespace ``name`` back
- to the root namespace
-
- Examples:
-
- .. code-block:: python
-
- ['namespace', 'create_namespace', 'testns']
-
- ['namespace', 'assign_port_to_namespace', 'eth0', 'testns']
-
- * ``veth`` - manipulates with eth and veth devices
-
- List of supported functions:
-
- * ``add_veth_port port peer_port`` - adds a pair of veth ports named ``port`` and
- ``peer_port``
- * ``del_veth_port port peer_port`` - deletes a veth port pair specified by ``port``
- and ``peer_port``
- * ``bring_up_eth_port eth_port [namespace]`` - brings up ``eth_port`` in (optional)
- ``namespace``
-
- Examples:
-
- .. code-block:: python
-
- ['veth', 'add_veth_port', 'veth', 'veth1']
-
- ['veth', 'bring_up_eth_port', 'eth1']
-
- * ``tools`` - provides a set of helper functions
-
- List of supported functions:
-
- * ``Assert condition`` - evaluates given ``condition`` and raises ``AssertionError``
- in case that condition is not ``True``
- * ``Eval expression`` - evaluates given expression as a python code and returns
- its result
- * ``Exec command [regex]`` - executes a shell command and filters its output by
- (optional) regular expression
-
- Examples:
-
- .. code-block:: python
-
- ['tools', 'exec', 'numactl -H', 'available: ([0-9]+)']
- ['tools', 'assert', '#STEP[-1][0]>1']
-
- * ``wait`` - is used for test case interruption. This object doesn't have
- any functions. Once reached, vsperf will pause test execution and waits
- for press of ``Enter key``. It can be used during testcase design
- for debugging purposes.
-
- Examples:
-
- .. code-block:: python
-
- ['wait']
-
-Test Macros
------------
-
-Test profiles can include macros as part of the test step. Each step in the
-profile may return a value such as a port name. Recall macros use #STEP to
-indicate the recalled value inside the return structure. If the method the
-test step calls returns a value it can be later recalled, for example:
-
-.. code-block:: python
-
- {
- "Name": "vswitch_add_del_vport",
- "Deployment": "clean",
- "Description": "vSwitch - add and delete virtual port",
- "TestSteps": [
- ['vswitch', 'add_switch', 'int_br0'], # STEP 0
- ['vswitch', 'add_vport', 'int_br0'], # STEP 1
- ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'], # STEP 2
- ['vswitch', 'del_switch', 'int_br0'], # STEP 3
- ]
- }
-
-This test profile uses the vswitch add_vport method which returns a string
-value of the port added. This is later called by the del_port method using the
-name from step 1.
-
-It is also possible to use negative indexes in step macros. In that case
-``#STEP[-1]`` will refer to the result from previous step, ``#STEP[-2]``
-will refer to result of step called before previous step, etc. It means,
-that you could change ``STEP 2`` from previous example to achieve the same
-functionality:
-
-.. code-block:: python
-
- ['vswitch', 'del_port', 'int_br0', '#STEP[-1][0]'], # STEP 2
-
-Also commonly used steps can be created as a separate profile.
-
-.. code-block:: python
-
- STEP_VSWITCH_PVP_INIT = [
- ['vswitch', 'add_switch', 'int_br0'], # STEP 0
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
- ['vswitch', 'add_vport', 'int_br0'], # STEP 3
- ['vswitch', 'add_vport', 'int_br0'], # STEP 4
- ]
-
-This profile can then be used inside other testcases
-
-.. code-block:: python
-
- {
- "Name": "vswitch_pvp",
- "Deployment": "clean",
- "Description": "vSwitch - configure switch and one vnf",
- "TestSteps": STEP_VSWITCH_PVP_INIT +
- [
- ['vnf', 'start'],
- ['vnf', 'stop'],
- ] +
- STEP_VSWITCH_PVP_FINIT
- }
-
-HelloWorld and other basic Testcases
-------------------------------------
-
-The following examples are for demonstration purposes.
-You can run them by copying and pasting into the
-conf/integration/01_testcases.conf file.
-A command-line instruction is shown at the end of each
-example.
-
-HelloWorld
-^^^^^^^^^^
-
-The first example is a HelloWorld testcase.
-It simply creates a bridge with 2 physical ports, then sets up a flow to drop
-incoming packets from the port that was instantiated at the STEP #1.
-There's no interaction with the traffic generator.
-Then the flow, the 2 ports and the bridge are deleted.
-'add_phy_port' method creates a 'dpdk' type interface that will manage the
-physical port. The string value returned is the port name that will be referred
-by 'del_port' later on.
-
-.. code-block:: python
-
- {
- "Name": "HelloWorld",
- "Description": "My first testcase",
- "Deployment": "clean",
- "TestSteps": [
- ['vswitch', 'add_switch', 'int_br0'], # STEP 0
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'actions': ['drop'], 'idle_timeout': '0'}],
- ['vswitch', 'del_flow', 'int_br0'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
- ['vswitch', 'del_switch', 'int_br0'],
- ]
-
- },
-
-To run HelloWorld test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration HelloWorld
-
-Specify a Flow by the IP address
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The next example shows how to explicitly set up a flow by specifying a
-destination IP address.
-All packets received from the port created at STEP #1 that have a destination
-IP address = 90.90.90.90 will be forwarded to the port created at the STEP #2.
-
-.. code-block:: python
-
- {
- "Name": "p2p_rule_l3da",
- "Description": "Phy2Phy with rule on L3 Dest Addr",
- "Deployment": "clean",
- "biDirectional": "False",
- "TestSteps": [
- ['vswitch', 'add_switch', 'int_br0'], # STEP 0
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['trafficgen', 'send_traffic', \
- {'traffic_type' : 'rfc2544_continuous'}],
- ['vswitch', 'dump_flows', 'int_br0'], # STEP 5
- ['vswitch', 'del_flow', 'int_br0'], # STEP 7 == del-flows
- ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
- ['vswitch', 'del_switch', 'int_br0'],
- ]
- },
-
-To run the test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration p2p_rule_l3da
-
-Multistream feature
-^^^^^^^^^^^^^^^^^^^
-
-The next testcase uses the multistream feature.
-The traffic generator will send packets with different UDP ports.
-That is accomplished by using "Stream Type" and "MultiStream" keywords.
-4 different flows are set to forward all incoming packets.
-
-.. code-block:: python
-
- {
- "Name": "multistream_l4",
- "Description": "Multistream on UDP ports",
- "Deployment": "clean",
- "Parameters": {
- 'TRAFFIC' : {
- "multistream": 4,
- "stream_type": "L4",
- },
- },
- "TestSteps": [
- ['vswitch', 'add_switch', 'int_br0'], # STEP 0
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
- # Setup Flows
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '2', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '3', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- # Send mono-dir traffic
- ['trafficgen', 'send_traffic', \
- {'traffic_type' : 'rfc2544_continuous', \
- 'bidir' : 'False'}],
- # Clean up
- ['vswitch', 'del_flow', 'int_br0'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
- ['vswitch', 'del_switch', 'int_br0'],
- ]
- },
-
-To run the test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration multistream_l4
-
-PVP with a VM Replacement
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-This example launches a 1st VM in a PVP topology, then the VM is replaced
-by another VM.
-When VNF setup parameter in ./conf/04_vnf.conf is "QemuDpdkVhostUser"
-'add_vport' method creates a 'dpdkvhostuser' type port to connect a VM.
-
-.. code-block:: python
-
- {
- "Name": "ex_replace_vm",
- "Description": "PVP with VM replacement",
- "Deployment": "clean",
- "TestSteps": [
- ['vswitch', 'add_switch', 'int_br0'], # STEP 0
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
- ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1
- ['vswitch', 'add_vport', 'int_br0'], # STEP 4
-
- # Setup Flows
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[2][1]', \
- 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[3][1]', \
- 'actions': ['output:#STEP[1][1]'], 'idle_timeout': '0'}],
-
- # Start VM 1
- ['vnf1', 'start'],
- # Now we want to replace VM 1 with another VM
- ['vnf1', 'stop'],
-
- ['vswitch', 'add_vport', 'int_br0'], # STEP 11 vm2
- ['vswitch', 'add_vport', 'int_br0'], # STEP 12
- ['vswitch', 'del_flow', 'int_br0'],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'actions': ['output:#STEP[11][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[12][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
-
- # Start VM 2
- ['vnf2', 'start'],
- ['vnf2', 'stop'],
- ['vswitch', 'dump_flows', 'int_br0'],
-
- # Clean up
- ['vswitch', 'del_flow', 'int_br0'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1
- ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[11][0]'], # vm2
- ['vswitch', 'del_port', 'int_br0', '#STEP[12][0]'],
- ['vswitch', 'del_switch', 'int_br0'],
- ]
- },
-
-To run the test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration ex_replace_vm
-
-VM with a Linux bridge
-^^^^^^^^^^^^^^^^^^^^^^
-
-This example setups a PVP topology and routes traffic to the VM based on
-the destination IP address. A command-line parameter is used to select a Linux
-bridge as a guest loopback application. It is also possible to select a guest
-loopback application by a configuration option ``GUEST_LOOPBACK``.
-
-.. code-block:: python
-
- {
- "Name": "ex_pvp_rule_l3da",
- "Description": "PVP with flow on L3 Dest Addr",
- "Deployment": "clean",
- "TestSteps": [
- ['vswitch', 'add_switch', 'int_br0'], # STEP 0
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
- ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1
- ['vswitch', 'add_vport', 'int_br0'], # STEP 4
- # Setup Flows
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_dst': '90.90.90.90', \
- 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
- # Each pkt from the VM is forwarded to the 2nd dpdk port
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- # Start VMs
- ['vnf1', 'start'],
- ['trafficgen', 'send_traffic', \
- {'traffic_type' : 'rfc2544_continuous', \
- 'bidir' : 'False'}],
- ['vnf1', 'stop'],
- # Clean up
- ['vswitch', 'dump_flows', 'int_br0'], # STEP 10
- ['vswitch', 'del_flow', 'int_br0'], # STEP 11
- ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports
- ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
- ['vswitch', 'del_switch', 'int_br0'],
- ]
- },
-
-To run the test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --test-params \
- "GUEST_LOOPBACK=['linux_bridge']" --integration ex_pvp_rule_l3da
-
-Forward packets based on UDP port
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-This examples launches 2 VMs connected in parallel.
-Incoming packets will be forwarded to one specific VM depending on the
-destination UDP port.
-
-.. code-block:: python
-
- {
- "Name": "ex_2pvp_rule_l4dp",
- "Description": "2 PVP with flows on L4 Dest Port",
- "Deployment": "clean",
- "Parameters": {
- 'TRAFFIC' : {
- "multistream": 2,
- "stream_type": "L4",
- },
- },
- "TestSteps": [
- ['vswitch', 'add_switch', 'int_br0'], # STEP 0
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 1
- ['vswitch', 'add_phy_port', 'int_br0'], # STEP 2
- ['vswitch', 'add_vport', 'int_br0'], # STEP 3 vm1
- ['vswitch', 'add_vport', 'int_br0'], # STEP 4
- ['vswitch', 'add_vport', 'int_br0'], # STEP 5 vm2
- ['vswitch', 'add_vport', 'int_br0'], # STEP 6
- # Setup Flows to reply ICMPv6 and similar packets, so to
- # avoid flooding internal port with their re-transmissions
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:01', \
- 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:02', \
- 'actions': ['output:#STEP[4][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:03', \
- 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', \
- {'priority': '1', 'dl_src': '00:00:00:00:00:04', \
- 'actions': ['output:#STEP[6][1]'], 'idle_timeout': '0'}],
- # Forward UDP packets depending on dest port
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '0', \
- 'actions': ['output:#STEP[3][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[1][1]', \
- 'dl_type': '0x0800', 'nw_proto': '17', 'udp_dst': '1', \
- 'actions': ['output:#STEP[5][1]'], 'idle_timeout': '0'}],
- # Send VM output to phy port #2
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[4][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'int_br0', {'in_port': '#STEP[6][1]', \
- 'actions': ['output:#STEP[2][1]'], 'idle_timeout': '0'}],
- # Start VMs
- ['vnf1', 'start'], # STEP 16
- ['vnf2', 'start'], # STEP 17
- ['trafficgen', 'send_traffic', \
- {'traffic_type' : 'rfc2544_continuous', \
- 'bidir' : 'False'}],
- ['vnf1', 'stop'],
- ['vnf2', 'stop'],
- ['vswitch', 'dump_flows', 'int_br0'],
- # Clean up
- ['vswitch', 'del_flow', 'int_br0'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[1][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[2][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[3][0]'], # vm1 ports
- ['vswitch', 'del_port', 'int_br0', '#STEP[4][0]'],
- ['vswitch', 'del_port', 'int_br0', '#STEP[5][0]'], # vm2 ports
- ['vswitch', 'del_port', 'int_br0', '#STEP[6][0]'],
- ['vswitch', 'del_switch', 'int_br0'],
- ]
- },
-
-To run the test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py --integration ex_2pvp_rule_l4dp
-
-Modification of existing PVVP deployment
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-This is an example of modification of a standard deployment scenario with additional TestSteps.
-Standard PVVP scenario is used to configure a vSwitch and to deploy two VNFs connected
-in series. Additional TestSteps will deploy a 3rd VNF and connect it in parallel to
-already configured VNFs. Traffic generator is instructed (by Multistream feature) to send
-two separate traffic streams. One stream will be sent to the standalone VNF and second
-to two chained VNFs.
-
-In case, that test is defined as a performance test, then traffic results will be collected
-and available in both csv and rst report files.
-
-.. code-block:: python
-
- {
- "Name": "pvvp_pvp_cont",
- "Deployment": "pvvp",
- "Description": "PVVP and PVP in parallel with Continuous Stream",
- "Parameters" : {
- "TRAFFIC" : {
- "traffic_type" : "rfc2544_continuous",
- "multistream": 2,
- },
- },
- "TestSteps": [
- ['vswitch', 'add_vport', 'br0'],
- ['vswitch', 'add_vport', 'br0'],
- # priority must be higher than default 32768, otherwise flows won't match
- ['vswitch', 'add_flow', 'br0',
- {'in_port': '1', 'actions': ['output:#STEP[-2][1]'], 'idle_timeout': '0', 'dl_type':'0x0800',
- 'nw_proto':'17', 'tp_dst':'0', 'priority': '33000'}],
- ['vswitch', 'add_flow', 'br0',
- {'in_port': '2', 'actions': ['output:#STEP[-2][1]'], 'idle_timeout': '0', 'dl_type':'0x0800',
- 'nw_proto':'17', 'tp_dst':'0', 'priority': '33000'}],
- ['vswitch', 'add_flow', 'br0', {'in_port': '#STEP[-4][1]', 'actions': ['output:1'],
- 'idle_timeout': '0'}],
- ['vswitch', 'add_flow', 'br0', {'in_port': '#STEP[-4][1]', 'actions': ['output:2'],
- 'idle_timeout': '0'}],
- ['vswitch', 'dump_flows', 'br0'],
- ['vnf1', 'start'],
- ]
- },
-
-To run the test:
-
- .. code-block:: console
-
- ./vsperf --conf-file user_settings.py pvvp_pvp_cont
-
diff --git a/docs/testing/user/userguide/testusage.rst b/docs/testing/user/userguide/testusage.rst
deleted file mode 100644
index c6037aaf..00000000
--- a/docs/testing/user/userguide/testusage.rst
+++ /dev/null
@@ -1,848 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-vSwitchPerf test suites userguide
----------------------------------
-
-General
-^^^^^^^
-
-VSPERF requires a traffic generators to run tests, automated traffic gen
-support in VSPERF includes:
-
-- IXIA traffic generator (IxNetwork hardware) and a machine that runs the IXIA
- client software.
-- Spirent traffic generator (TestCenter hardware chassis or TestCenter virtual
- in a VM) and a VM to run the Spirent Virtual Deployment Service image,
- formerly known as "Spirent LabServer".
-- Xena Network traffic generator (Xena hardware chassis) that houses the Xena
- Traffic generator modules.
-- Moongen software traffic generator. Requires a separate machine running
- moongen to execute packet generation.
-
-If you want to use another traffic generator, please select the :ref:`trafficgen-dummy`
-generator.
-
-VSPERF Installation
-^^^^^^^^^^^^^^^^^^^
-
-To see the supported Operating Systems, vSwitches and system requirements,
-please follow the `installation instructions <vsperf-installation>`.
-
-Traffic Generator Setup
-^^^^^^^^^^^^^^^^^^^^^^^
-
-Follow the `Traffic generator instructions <trafficgen-installation>` to
-install and configure a suitable traffic generator.
-
-Cloning and building src dependencies
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-In order to run VSPERF, you will need to download DPDK and OVS. You can
-do this manually and build them in a preferred location, OR you could
-use vswitchperf/src. The vswitchperf/src directory contains makefiles
-that will allow you to clone and build the libraries that VSPERF depends
-on, such as DPDK and OVS. To clone and build simply:
-
-.. code-block:: console
-
- $ cd src
- $ make
-
-VSPERF can be used with stock OVS (without DPDK support). When build
-is finished, the libraries are stored in src_vanilla directory.
-
-The 'make' builds all options in src:
-
-* Vanilla OVS
-* OVS with vhost_user as the guest access method (with DPDK support)
-
-The vhost_user build will reside in src/ovs/
-The Vanilla OVS build will reside in vswitchperf/src_vanilla
-
-To delete a src subdirectory and its contents to allow you to re-clone simply
-use:
-
-.. code-block:: console
-
- $ make clobber
-
-Configure the ``./conf/10_custom.conf`` file
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The ``10_custom.conf`` file is the configuration file that overrides
-default configurations in all the other configuration files in ``./conf``
-The supplied ``10_custom.conf`` file **MUST** be modified, as it contains
-configuration items for which there are no reasonable default values.
-
-The configuration items that can be added is not limited to the initial
-contents. Any configuration item mentioned in any .conf file in
-``./conf`` directory can be added and that item will be overridden by
-the custom configuration value.
-
-Further details about configuration files evaluation and special behaviour
-of options with ``GUEST_`` prefix could be found at :ref:`design document
-<design-configuration>`.
-
-Using a custom settings file
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-If your ``10_custom.conf`` doesn't reside in the ``./conf`` directory
-of if you want to use an alternative configuration file, the file can
-be passed to ``vsperf`` via the ``--conf-file`` argument.
-
-.. code-block:: console
-
- $ ./vsperf --conf-file <path_to_custom_conf> ...
-
-Note that configuration passed in via the environment (``--load-env``)
-or via another command line argument will override both the default and
-your custom configuration files. This "priority hierarchy" can be
-described like so (1 = max priority):
-
-1. Testcase definition section ``Parameters``
-2. Command line arguments
-3. Environment variables
-4. Configuration file(s)
-
-Further details about configuration files evaluation and special behaviour
-of options with ``GUEST_`` prefix could be found at :ref:`design document
-<design-configuration>`.
-
-.. _overriding-parameters-documentation:
-
-Overriding values defined in configuration files
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The configuration items can be overridden by command line argument
-``--test-params``. In this case, the configuration items and
-their values should be passed in form of ``item=value`` and separated
-by semicolon.
-
-Example:
-
-.. code:: console
-
- $ ./vsperf --test-params "TRAFFICGEN_DURATION=10;TRAFFICGEN_PKT_SIZES=(128,);" \
- "GUEST_LOOPBACK=['testpmd','l2fwd']" pvvp_tput
-
-The second option is to override configuration items by ``Parameters`` section
-of the test case definition. The configuration items can be added into ``Parameters``
-dictionary with their new values. These values will override values defined in
-configuration files or specified by ``--test-params`` command line argument.
-
-Example:
-
-.. code:: python
-
- "Parameters" : {'TRAFFICGEN_PKT_SIZES' : (128,),
- 'TRAFFICGEN_DURATION' : 10,
- 'GUEST_LOOPBACK' : ['testpmd','l2fwd'],
- }
-
-**NOTE:** In both cases, configuration item names and their values must be specified
-in the same form as they are defined inside configuration files. Parameter names
-must be specified in uppercase and data types of original and new value must match.
-Python syntax rules related to data types and structures must be followed.
-For example, parameter ``TRAFFICGEN_PKT_SIZES`` above is defined as a tuple
-with a single value ``128``. In this case trailing comma is mandatory, otherwise
-value can be wrongly interpreted as a number instead of a tuple and vsperf
-execution would fail. Please check configuration files for default values and their
-types and use them as a basis for any customized values. In case of any doubt, please
-check official python documentation related to data structures like tuples, lists
-and dictionaries.
-
-**NOTE:** Vsperf execution will terminate with runtime error in case, that unknown
-parameter name is passed via ``--test-params`` CLI argument or defined in ``Parameters``
-section of test case definition. It is also forbidden to redefine a value of
-``TEST_PARAMS`` configuration item via CLI or ``Parameters`` section.
-
-vloop_vnf
-^^^^^^^^^
-
-VSPERF uses a VM image called vloop_vnf for looping traffic in the deployment
-scenarios involving VMs. The image can be downloaded from
-`<http://artifacts.opnfv.org/>`__.
-
-Please see the installation instructions for information on :ref:`vloop-vnf`
-images.
-
-.. _l2fwd-module:
-
-l2fwd Kernel Module
-^^^^^^^^^^^^^^^^^^^
-
-A Kernel Module that provides OSI Layer 2 Ipv4 termination or forwarding with
-support for Destination Network Address Translation (DNAT) for both the MAC and
-IP addresses. l2fwd can be found in <vswitchperf_dir>/src/l2fwd
-
-Executing tests
-^^^^^^^^^^^^^^^
-
-All examples inside these docs assume, that user is inside the VSPERF
-directory. VSPERF can be executed from any directory.
-
-Before running any tests make sure you have root permissions by adding
-the following line to /etc/sudoers:
-
-.. code-block:: console
-
- username ALL=(ALL) NOPASSWD: ALL
-
-username in the example above should be replaced with a real username.
-
-To list the available tests:
-
-.. code-block:: console
-
- $ ./vsperf --list
-
-To run a single test:
-
-.. code-block:: console
-
- $ ./vsperf $TESTNAME
-
-Where $TESTNAME is the name of the vsperf test you would like to run.
-
-To run a group of tests, for example all tests with a name containing
-'RFC2544':
-
-.. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf --tests="RFC2544"
-
-To run all tests:
-
-.. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
-
-Some tests allow for configurable parameters, including test duration
-(in seconds) as well as packet sizes (in bytes).
-
-.. code:: bash
-
- $ ./vsperf --conf-file user_settings.py \
- --tests RFC2544Tput \
- --test-params "TRAFFICGEN_DURATION=10;TRAFFICGEN_PKT_SIZES=(128,)"
-
-For all available options, check out the help dialog:
-
-.. code-block:: console
-
- $ ./vsperf --help
-
-Executing Vanilla OVS tests
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-1. If needed, recompile src for all OVS variants
-
- .. code-block:: console
-
- $ cd src
- $ make distclean
- $ make
-
-2. Update your ``10_custom.conf`` file to use Vanilla OVS:
-
- .. code-block:: python
-
- VSWITCH = 'OvsVanilla'
-
-3. Run test:
-
- .. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf>
-
- Please note if you don't want to configure Vanilla OVS through the
- configuration file, you can pass it as a CLI argument.
-
- .. code-block:: console
-
- $ ./vsperf --vswitch OvsVanilla
-
-
-Executing tests with VMs
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-To run tests using vhost-user as guest access method:
-
-1. Set VHOST_METHOD and VNF of your settings file to:
-
- .. code-block:: python
-
- VSWITCH = 'OvsDpdkVhost'
- VNF = 'QemuDpdkVhost'
-
-2. If needed, recompile src for all OVS variants
-
- .. code-block:: console
-
- $ cd src
- $ make distclean
- $ make
-
-3. Run test:
-
- .. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
-
-Executing tests with VMs using Vanilla OVS
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-To run tests using Vanilla OVS:
-
-1. Set the following variables:
-
- .. code-block:: python
-
- VSWITCH = 'OvsVanilla'
- VNF = 'QemuVirtioNet'
-
- VANILLA_TGEN_PORT1_IP = n.n.n.n
- VANILLA_TGEN_PORT1_MAC = nn:nn:nn:nn:nn:nn
-
- VANILLA_TGEN_PORT2_IP = n.n.n.n
- VANILLA_TGEN_PORT2_MAC = nn:nn:nn:nn:nn:nn
-
- VANILLA_BRIDGE_IP = n.n.n.n
-
- or use ``--test-params`` option
-
- .. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf \
- --test-params "VANILLA_TGEN_PORT1_IP=n.n.n.n;" \
- "VANILLA_TGEN_PORT1_MAC=nn:nn:nn:nn:nn:nn;" \
- "VANILLA_TGEN_PORT2_IP=n.n.n.n;" \
- "VANILLA_TGEN_PORT2_MAC=nn:nn:nn:nn:nn:nn"
-
-2. If needed, recompile src for all OVS variants
-
- .. code-block:: console
-
- $ cd src
- $ make distclean
- $ make
-
-3. Run test:
-
- .. code-block:: console
-
- $ ./vsperf --conf-file<path_to_custom_conf>/10_custom.conf
-
-.. _vpp-test:
-
-Executing VPP tests
-^^^^^^^^^^^^^^^^^^^
-
-Currently it is not possible to use standard scenario deployments for execution of
-tests with VPP. It means, that deployments ``p2p``, ``pvp``, ``pvvp`` and in general any
-:ref:`pxp-deployment` won't work with VPP. However it is possible to use VPP in
-:ref:`step-driven-tests`. A basic set of VPP testcases covering ``phy2phy``, ``pvp``
-and ``pvvp`` tests are already prepared.
-
-List of performance tests with VPP support follows:
-
-* phy2phy_tput_vpp: VPP: LTD.Throughput.RFC2544.PacketLossRatio
-* phy2phy_cont_vpp: VPP: Phy2Phy Continuous Stream
-* phy2phy_back2back_vpp: VPP: LTD.Throughput.RFC2544.BackToBackFrames
-* pvp_tput_vpp: VPP: LTD.Throughput.RFC2544.PacketLossRatio
-* pvp_cont_vpp: VPP: PVP Continuous Stream
-* pvp_back2back_vpp: VPP: LTD.Throughput.RFC2544.BackToBackFrames
-* pvvp_tput_vpp: VPP: LTD.Throughput.RFC2544.PacketLossRatio
-* pvvp_cont_vpp: VPP: PVP Continuous Stream
-* pvvp_back2back_vpp: VPP: LTD.Throughput.RFC2544.BackToBackFrames
-
-In order to execute testcases with VPP it is required to:
-
-* install VPP manually, see :ref:`vpp-installation`
-* configure ``WHITELIST_NICS``, with two physical NICs connected to the traffic generator
-* configure traffic generator, see :ref:`trafficgen-installation`
-
-After that it is possible to execute VPP testcases listed above.
-
-For example:
-
-.. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf> phy2phy_tput_vpp
-
-.. _vfio-pci:
-
-Using vfio_pci with DPDK
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-To use vfio with DPDK instead of igb_uio add into your custom configuration
-file the following parameter:
-
-.. code-block:: python
-
- PATHS['dpdk']['src']['modules'] = ['uio', 'vfio-pci']
-
-
-**NOTE:** In case, that DPDK is installed from binary package, then please
-set ``PATHS['dpdk']['bin']['modules']`` instead.
-
-**NOTE:** Please ensure that Intel VT-d is enabled in BIOS.
-
-**NOTE:** Please ensure your boot/grub parameters include
-the following:
-
-.. code-block:: console
-
- iommu=pt intel_iommu=on
-
-To check that IOMMU is enabled on your platform:
-
-.. code-block:: console
-
- $ dmesg | grep IOMMU
- [ 0.000000] Intel-IOMMU: enabled
- [ 0.139882] dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0466 ecap f020de
- [ 0.139888] dmar: IOMMU 1: reg_base_addr ebffc000 ver 1:0 cap d2078c106f0466 ecap f020de
- [ 0.139893] IOAPIC id 2 under DRHD base 0xfbffe000 IOMMU 0
- [ 0.139894] IOAPIC id 0 under DRHD base 0xebffc000 IOMMU 1
- [ 0.139895] IOAPIC id 1 under DRHD base 0xebffc000 IOMMU 1
- [ 3.335744] IOMMU: dmar0 using Queued invalidation
- [ 3.335746] IOMMU: dmar1 using Queued invalidation
- ....
-
-.. _SRIOV-support:
-
-Using SRIOV support
-^^^^^^^^^^^^^^^^^^^
-
-To use virtual functions of NIC with SRIOV support, use extended form
-of NIC PCI slot definition:
-
-.. code-block:: python
-
- WHITELIST_NICS = ['0000:05:00.0|vf0', '0000:05:00.1|vf3']
-
-Where 'vf' is an indication of virtual function usage and following
-number defines a VF to be used. In case that VF usage is detected,
-then vswitchperf will enable SRIOV support for given card and it will
-detect PCI slot numbers of selected VFs.
-
-So in example above, one VF will be configured for NIC '0000:05:00.0'
-and four VFs will be configured for NIC '0000:05:00.1'. Vswitchperf
-will detect PCI addresses of selected VFs and it will use them during
-test execution.
-
-At the end of vswitchperf execution, SRIOV support will be disabled.
-
-SRIOV support is generic and it can be used in different testing scenarios.
-For example:
-
-* vSwitch tests with DPDK or without DPDK support to verify impact
- of VF usage on vSwitch performance
-* tests without vSwitch, where traffic is forwared directly
- between VF interfaces by packet forwarder (e.g. testpmd application)
-* tests without vSwitch, where VM accesses VF interfaces directly
- by PCI-passthrough_ to measure raw VM throughput performance.
-
-.. _PCI-passthrough:
-
-Using QEMU with PCI passthrough support
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Raw virtual machine throughput performance can be measured by execution of PVP
-test with direct access to NICs by PCI passthrough. To execute VM with direct
-access to PCI devices, enable vfio-pci_. In order to use virtual functions,
-SRIOV-support_ must be enabled.
-
-Execution of test with PCI passthrough with vswitch disabled:
-
-.. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf \
- --vswitch none --vnf QemuPciPassthrough pvp_tput
-
-Any of supported guest-loopback-application_ can be used inside VM with
-PCI passthrough support.
-
-Note: Qemu with PCI passthrough support can be used only with PVP test
-deployment.
-
-.. _guest-loopback-application:
-
-Selection of loopback application for tests with VMs
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-To select the loopback applications which will forward packets inside VMs,
-the following parameter should be configured:
-
-.. code-block:: python
-
- GUEST_LOOPBACK = ['testpmd']
-
-or use ``--test-params`` CLI argument:
-
-.. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf \
- --test-params "GUEST_LOOPBACK=['testpmd']"
-
-Supported loopback applications are:
-
-.. code-block:: console
-
- 'testpmd' - testpmd from dpdk will be built and used
- 'l2fwd' - l2fwd module provided by Huawei will be built and used
- 'linux_bridge' - linux bridge will be configured
- 'buildin' - nothing will be configured by vsperf; VM image must
- ensure traffic forwarding between its interfaces
-
-Guest loopback application must be configured, otherwise traffic
-will not be forwarded by VM and testcases with VM related deployments
-will fail. Guest loopback application is set to 'testpmd' by default.
-
-**NOTE:** In case that only 1 or more than 2 NICs are configured for VM,
-then 'testpmd' should be used. As it is able to forward traffic between
-multiple VM NIC pairs.
-
-**NOTE:** In case of linux_bridge, all guest NICs are connected to the same
-bridge inside the guest.
-
-Mergable Buffers Options with QEMU
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Mergable buffers can be disabled with VSPerf within QEMU. This option can
-increase performance significantly when not using jumbo frame sized packets.
-By default VSPerf disables mergable buffers. If you wish to enable it you
-can modify the setting in the a custom conf file.
-
-.. code-block:: python
-
- GUEST_NIC_MERGE_BUFFERS_DISABLE = [False]
-
-Then execute using the custom conf file.
-
-.. code-block:: console
-
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
-
-Alternatively you can just pass the param during execution.
-
-.. code-block:: console
-
- $ ./vsperf --test-params "GUEST_NIC_MERGE_BUFFERS_DISABLE=[False]"
-
-
-Selection of dpdk binding driver for tests with VMs
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-To select dpdk binding driver, which will specify which driver the vm NICs will
-use for dpdk bind, the following configuration parameter should be configured:
-
-.. code-block:: console
-
- GUEST_DPDK_BIND_DRIVER = ['igb_uio_from_src']
-
-The supported dpdk guest bind drivers are:
-
-.. code-block:: console
-
- 'uio_pci_generic' - Use uio_pci_generic driver
- 'igb_uio_from_src' - Build and use the igb_uio driver from the dpdk src
- files
- 'vfio_no_iommu' - Use vfio with no iommu option. This requires custom
- guest images that support this option. The default
- vloop image does not support this driver.
-
-Note: uio_pci_generic does not support sr-iov testcases with guests attached.
-This is because uio_pci_generic only supports legacy interrupts. In case
-uio_pci_generic is selected with the vnf as QemuPciPassthrough it will be
-modified to use igb_uio_from_src instead.
-
-Note: vfio_no_iommu requires kernels equal to or greater than 4.5 and dpdk
-16.04 or greater. Using this option will also taint the kernel.
-
-Please refer to the dpdk documents at http://dpdk.org/doc/guides for more
-information on these drivers.
-
-Multi-Queue Configuration
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-VSPerf currently supports multi-queue with the following limitations:
-
-1. Requires QEMU 2.5 or greater and any OVS version higher than 2.5. The
- default upstream package versions installed by VSPerf satisfies this
- requirement.
-
-2. Guest image must have ethtool utility installed if using l2fwd or linux
- bridge inside guest for loopback.
-
-3. If using OVS versions 2.5.0 or less enable old style multi-queue as shown
- in the ''02_vswitch.conf'' file.
-
- .. code-block:: python
-
- OVS_OLD_STYLE_MQ = True
-
-To enable multi-queue for dpdk modify the ''02_vswitch.conf'' file.
-
-.. code-block:: python
-
- VSWITCH_DPDK_MULTI_QUEUES = 2
-
-**NOTE:** you should consider using the switch affinity to set a pmd cpu mask
-that can optimize your performance. Consider the numa of the NIC in use if this
-applies by checking /sys/class/net/<eth_name>/device/numa_node and setting an
-appropriate mask to create PMD threads on the same numa node.
-
-When multi-queue is enabled, each dpdk or dpdkvhostuser port that is created
-on the switch will set the option for multiple queues. If old style multi queue
-has been enabled a global option for multi queue will be used instead of the
-port by port option.
-
-To enable multi-queue on the guest modify the ''04_vnf.conf'' file.
-
-.. code-block:: python
-
- GUEST_NIC_QUEUES = [2]
-
-Enabling multi-queue at the guest will add multiple queues to each NIC port when
-qemu launches the guest.
-
-In case of Vanilla OVS, multi-queue is enabled on the tuntap ports and nic
-queues will be enabled inside the guest with ethtool. Simply enabling the
-multi-queue on the guest is sufficient for Vanilla OVS multi-queue.
-
-Testpmd should be configured to take advantage of multi-queue on the guest if
-using DPDKVhostUser. This can be done by modifying the ''04_vnf.conf'' file.
-
-.. code-block:: python
-
- GUEST_TESTPMD_PARAMS = ['-l 0,1,2,3,4 -n 4 --socket-mem 512 -- '
- '--burst=64 -i --txqflags=0xf00 '
- '--nb-cores=4 --rxq=2 --txq=2 '
- '--disable-hw-vlan']
-
-**NOTE:** The guest SMP cores must be configured to allow for testpmd to use the
-optimal number of cores to take advantage of the multiple guest queues.
-
-In case of using Vanilla OVS and qemu virtio-net you can increase performance
-by binding vhost-net threads to cpus. This can be done by enabling the affinity
-in the ''04_vnf.conf'' file. This can be done to non multi-queue enabled
-configurations as well as there will be 2 vhost-net threads.
-
-.. code-block:: python
-
- VSWITCH_VHOST_NET_AFFINITIZATION = True
-
- VSWITCH_VHOST_CPU_MAP = [4,5,8,11]
-
-**NOTE:** This method of binding would require a custom script in a real
-environment.
-
-**NOTE:** For optimal performance guest SMPs and/or vhost-net threads should be
-on the same numa as the NIC in use if possible/applicable. Testpmd should be
-assigned at least (nb_cores +1) total cores with the cpu mask.
-
-Executing Packet Forwarding tests
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-To select the applications which will forward packets,
-the following parameters should be configured:
-
-.. code-block:: python
-
- VSWITCH = 'none'
- PKTFWD = 'TestPMD'
-
-or use ``--vswitch`` and ``--fwdapp`` CLI arguments:
-
-.. code-block:: console
-
- $ ./vsperf phy2phy_cont --conf-file user_settings.py \
- --vswitch none \
- --fwdapp TestPMD
-
-Supported Packet Forwarding applications are:
-
-.. code-block:: console
-
- 'testpmd' - testpmd from dpdk
-
-
-1. Update your ''10_custom.conf'' file to use the appropriate variables
- for selected Packet Forwarder:
-
- .. code-block:: python
-
- # testpmd configuration
- TESTPMD_ARGS = []
- # packet forwarding mode supported by testpmd; Please see DPDK documentation
- # for comprehensive list of modes supported by your version.
- # e.g. io|mac|mac_retry|macswap|flowgen|rxonly|txonly|csum|icmpecho|...
- # Note: Option "mac_retry" has been changed to "mac retry" since DPDK v16.07
- TESTPMD_FWD_MODE = 'csum'
- # checksum calculation layer: ip|udp|tcp|sctp|outer-ip
- TESTPMD_CSUM_LAYER = 'ip'
- # checksum calculation place: hw (hardware) | sw (software)
- TESTPMD_CSUM_CALC = 'sw'
- # recognize tunnel headers: on|off
- TESTPMD_CSUM_PARSE_TUNNEL = 'off'
-
-2. Run test:
-
- .. code-block:: console
-
- $ ./vsperf phy2phy_tput --conf-file <path_to_settings_py>
-
-Executing Packet Forwarding tests with one guest
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-TestPMD with DPDK 16.11 or greater can be used to forward packets as a switch to a single guest using TestPMD vdev
-option. To set this configuration the following parameters should be used.
-
- .. code-block:: python
-
- VSWITCH = 'none'
- PKTFWD = 'TestPMD'
-
-or use ``--vswitch`` and ``--fwdapp`` CLI arguments:
-
- .. code-block:: console
-
- $ ./vsperf pvp_tput --conf-file user_settings.py \
- --vswitch none \
- --fwdapp TestPMD
-
-Guest forwarding application only supports TestPMD in this configuration.
-
- .. code-block:: python
-
- GUEST_LOOPBACK = ['testpmd']
-
-For optimal performance one cpu per port +1 should be used for TestPMD. Also set additional params for packet forwarding
-application to use the correct number of nb-cores.
-
- .. code-block:: python
-
- DPDK_SOCKET_MEM = ['1024', '0']
- VSWITCHD_DPDK_ARGS = ['-l', '46,44,42,40,38', '-n', '4']
- TESTPMD_ARGS = ['--nb-cores=4', '--txq=1', '--rxq=1']
-
-For guest TestPMD 3 VCpus should be assigned with the following TestPMD params.
-
- .. code-block:: python
-
- GUEST_TESTPMD_PARAMS = ['-l 0,1,2 -n 4 --socket-mem 1024 -- '
- '--burst=64 -i --txqflags=0xf00 '
- '--disable-hw-vlan --nb-cores=2 --txq=1 --rxq=1']
-
-Execution of TestPMD can be run with the following command line
-
- .. code-block:: console
-
- ./vsperf pvp_tput --vswitch=none --fwdapp=TestPMD --conf-file <path_to_settings_py>
-
-**NOTE:** To achieve the best 0% loss numbers with rfc2544 throughput testing, other tunings should be applied to host
-and guest such as tuned profiles and CPU tunings to prevent possible interrupts to worker threads.
-
-VSPERF modes of operation
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-VSPERF can be run in different modes. By default it will configure vSwitch,
-traffic generator and VNF. However it can be used just for configuration
-and execution of traffic generator. Another option is execution of all
-components except traffic generator itself.
-
-Mode of operation is driven by configuration parameter -m or --mode
-
-.. code-block:: console
-
- -m MODE, --mode MODE vsperf mode of operation;
- Values:
- "normal" - execute vSwitch, VNF and traffic generator
- "trafficgen" - execute only traffic generator
- "trafficgen-off" - execute vSwitch and VNF
- "trafficgen-pause" - execute vSwitch and VNF but wait before traffic transmission
-
-In case, that VSPERF is executed in "trafficgen" mode, then configuration
-of traffic generator can be modified through ``TRAFFIC`` dictionary passed to the
-``--test-params`` option. It is not needed to specify all values of ``TRAFFIC``
-dictionary. It is sufficient to specify only values, which should be changed.
-Detailed description of ``TRAFFIC`` dictionary can be found at
-:ref:`configuration-of-traffic-dictionary`.
-
-Example of execution of VSPERF in "trafficgen" mode:
-
-.. code-block:: console
-
- $ ./vsperf -m trafficgen --trafficgen IxNet --conf-file vsperf.conf \
- --test-params "TRAFFIC={'traffic_type':'rfc2544_continuous','bidir':'False','framerate':60}"
-
-Code change verification by pylint
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Every developer participating in VSPERF project should run
-pylint before his python code is submitted for review. Project
-specific configuration for pylint is available at 'pylint.rc'.
-
-Example of manual pylint invocation:
-
-.. code-block:: console
-
- $ pylint --rcfile ./pylintrc ./vsperf
-
-GOTCHAs:
-^^^^^^^^
-
-Custom image fails to boot
-~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Using custom VM images may not boot within VSPerf pxp testing because of
-the drive boot and shared type which could be caused by a missing scsi
-driver inside the image. In case of issues you can try changing the drive
-boot type to ide.
-
-.. code-block:: python
-
- GUEST_BOOT_DRIVE_TYPE = ['ide']
- GUEST_SHARED_DRIVE_TYPE = ['ide']
-
-OVS with DPDK and QEMU
-~~~~~~~~~~~~~~~~~~~~~~~
-
-If you encounter the following error: "before (last 100 chars):
-'-path=/dev/hugepages,share=on: unable to map backing store for
-hugepages: Cannot allocate memory\r\n\r\n" during qemu initialization,
-check the amount of hugepages on your system:
-
-.. code-block:: console
-
- $ cat /proc/meminfo | grep HugePages
-
-
-By default the vswitchd is launched with 1Gb of memory, to change
-this, modify --socket-mem parameter in conf/02_vswitch.conf to allocate
-an appropriate amount of memory:
-
-.. code-block:: python
-
- DPDK_SOCKET_MEM = ['1024', '0']
- VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4']
- VSWITCHD_DPDK_CONFIG = {
- 'dpdk-init' : 'true',
- 'dpdk-lcore-mask' : '0x4',
- 'dpdk-socket-mem' : '1024,0',
- }
-
-Note: Option ``VSWITCHD_DPDK_ARGS`` is used for vswitchd, which supports ``--dpdk``
-parameter. In recent vswitchd versions, option ``VSWITCHD_DPDK_CONFIG`` will be
-used to configure vswitchd via ``ovs-vsctl`` calls.
-
-
-More information
-^^^^^^^^^^^^^^^^
-
-For more information and details refer to the rest of vSwitchPerfuser documentation.
-
diff --git a/docs/testing/user/userguide/yardstick.rst b/docs/testing/user/userguide/yardstick.rst
deleted file mode 100644
index b5e5c72d..00000000
--- a/docs/testing/user/userguide/yardstick.rst
+++ /dev/null
@@ -1,250 +0,0 @@
-.. This work is licensed under a Creative Commons Attribution 4.0 International License.
-.. http://creativecommons.org/licenses/by/4.0
-.. (c) OPNFV, Intel Corporation, AT&T and others.
-
-Execution of vswitchperf testcases by Yardstick
------------------------------------------------
-
-General
-^^^^^^^
-
-Yardstick is a generic framework for a test execution, which is used for
-validation of installation of OPNFV platform. In the future, Yardstick will
-support two options of vswitchperf testcase execution:
-
-- plugin mode, which will execute native vswitchperf testcases; Tests will
- be executed natively by vsperf, and test results will be processed and
- reported by yardstick.
-- traffic generator mode, which will run vswitchperf in **trafficgen**
- mode only; Yardstick framework will be used to launch VNFs and to configure
- flows to ensure, that traffic is properly routed. This mode will allow to
- test OVS performance in real world scenarios.
-
-In Colorado release only the traffic generator mode is supported.
-
-Yardstick Installation
-^^^^^^^^^^^^^^^^^^^^^^
-
-In order to run Yardstick testcases, you will need to prepare your test
-environment. Please follow the `installation instructions
-<http://artifacts.opnfv.org/yardstick/docs/user_guides_framework/index.html>`__
-to install the yardstick.
-
-Please note, that yardstick uses OpenStack for execution of testcases.
-OpenStack must be installed with Heat and Neutron services. Otherwise
-vswitchperf testcases cannot be executed.
-
-VM image with vswitchperf
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-A special VM image is required for execution of vswitchperf specific testcases
-by yardstick. It is possible to use a sample VM image available at OPNFV
-artifactory or to build customized image.
-
-Sample VM image with vswitchperf
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Sample VM image is available at vswitchperf section of OPNFV artifactory
-for free download:
-
-.. code-block:: console
-
- $ wget http://artifacts.opnfv.org/vswitchperf/vnf/vsperf-yardstick-image.qcow2
-
-This image can be used for execution of sample testcases with dummy traffic
-generator.
-
-**NOTE:** Traffic generators might require an installation of client software.
-This software is not included in the sample image and must be installed by user.
-
-**NOTE:** This image will be updated only in case, that new features related
-to yardstick integration will be added to the vswitchperf.
-
-Preparation of custom VM image
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-In general, any Linux distribution supported by vswitchperf can be used as
-a base image for vswitchperf. One of the possibilities is to modify vloop-vnf
-image, which can be downloaded from `<http://artifacts.opnfv.org/vswitchperf.html/>`__
-(see :ref:`vloop-vnf`).
-
-Please follow the :ref:`vsperf-installation` to
-install vswitchperf inside vloop-vnf image. As vswitchperf will be run in
-trafficgen mode, it is possible to skip installation and compilation of OVS,
-QEMU and DPDK to keep image size smaller.
-
-In case, that selected traffic generator requires installation of additional
-client software, please follow appropriate documentation. For example in case
-of IXIA, you would need to install IxOS and IxNetowrk TCL API.
-
-VM image usage
-~~~~~~~~~~~~~~
-
-Image with vswitchperf must be uploaded into the glance service and
-vswitchperf specific flavor configured, e.g.:
-
-.. code-block:: console
-
- $ glance --os-username admin --os-image-api-version 1 image-create --name \
- vsperf --is-public true --disk-format qcow2 --container-format bare --file \
- vsperf-yardstick-image.qcow2
-
- $ nova --os-username admin flavor-create vsperf-flavor 100 2048 25 1
-
-Testcase execution
-^^^^^^^^^^^^^^^^^^
-
-After installation, yardstick is available as python package within yardstick
-specific virtual environment. It means, that yardstick environment must be
-enabled before the test execution, e.g.:
-
-.. code-block:: console
-
- source ~/yardstick_venv/bin/activate
-
-
-Next step is configuration of OpenStack environment, e.g. in case of devstack:
-
-.. code-block:: console
-
- source /opt/openstack/devstack/openrc
- export EXTERNAL_NETWORK=public
-
-Vswitchperf testcases executable by yardstick are located at vswitchperf
-repository inside ``yardstick/tests`` directory. Example of their download
-and execution follows:
-
-.. code-block:: console
-
- git clone https://gerrit.opnfv.org/gerrit/vswitchperf
- cd vswitchperf
-
- yardstick -d task start yardstick/tests/rfc2544_throughput_dummy.yaml
-
-**NOTE:** Optional argument ``-d`` shows debug output.
-
-Testcase customization
-^^^^^^^^^^^^^^^^^^^^^^
-
-Yardstick testcases are described by YAML files. vswitchperf specific testcases
-are part of the vswitchperf repository and their yaml files can be found at
-``yardstick/tests`` directory. For detailed description of yaml file structure,
-please see yardstick documentation and testcase samples. Only vswitchperf specific
-parts will be discussed here.
-
-Example of yaml file:
-
-.. code-block:: yaml
-
- ...
- scenarios:
- -
- type: Vsperf
- options:
- testname: 'p2p_rfc2544_throughput'
- trafficgen_port1: 'eth1'
- trafficgen_port2: 'eth3'
- external_bridge: 'br-ex'
- test_params: 'TRAFFICGEN_DURATION=30;TRAFFIC={'traffic_type':'rfc2544_throughput}'
- conf_file: '~/vsperf-yardstick.conf'
-
- host: vsperf.demo
-
- runner:
- type: Sequence
- scenario_option_name: frame_size
- sequence:
- - 64
- - 128
- - 512
- - 1024
- - 1518
- sla:
- metrics: 'throughput_rx_fps'
- throughput_rx_fps: 500000
- action: monitor
-
- context:
- ...
-
-Section option
-~~~~~~~~~~~~~~
-
-Section **option** defines details of vswitchperf test scenario. Lot of options
-are identical to the vswitchperf parameters passed through ``--test-params``
-argument. Following options are supported:
-
-- **frame_size** - a packet size for which test should be executed;
- Multiple packet sizes can be tested by modification of Sequence runner
- section inside YAML definition. Default: '64'
-- **conf_file** - sets path to the vswitchperf configuration file, which will be
- uploaded to VM; Default: '~/vsperf-yardstick.conf'
-- **setup_script** - sets path to the setup script, which will be executed
- during setup and teardown phases
-- **trafficgen_port1** - specifies device name of 1st interface connected to
- the trafficgen
-- **trafficgen_port2** - specifies device name of 2nd interface connected to
- the trafficgen
-- **external_bridge** - specifies name of external bridge configured in OVS;
- Default: 'br-ex'
-- **test_params** - specifies a string with a list of vsperf configuration
- parameters, which will be passed to the ``--test-params`` CLI argument;
- Parameters should be stated in the form of ``param=value`` and separated
- by a semicolon. Configuration of traffic generator is driven by ``TRAFFIC``
- dictionary, which can be also updated by values defined by ``test_params``.
- Please check VSPERF documentation for details about available configuration
- parameters and their data types.
- In case that both **test_params** and **conf_file** are specified,
- then values from **test_params** will override values defined
- in the configuration file.
-
-In case that **trafficgen_port1** and/or **trafficgen_port2** are defined, then
-these interfaces will be inserted into the **external_bridge** of OVS. It is
-expected, that OVS runs at the same node, where the testcase is executed. In case
-of more complex OpenStack installation or a need of additional OVS configuration,
-**setup_script** can be used.
-
-**NOTE** It is essential to specify a configuration for selected traffic generator.
-In case, that standalone testcase is created, then traffic generator can be
-selected and configured directly in YAML file by **test_params**. On the other
-hand, if multiple testcases should be executed with the same traffic generator
-settings, then a customized configuration file should be prepared and its name
-passed by **conf_file** option.
-
-Section runner
-~~~~~~~~~~~~~~
-
-Yardstick supports several `runner types
-<http://artifacts.opnfv.org/yardstick/docs/userguide/architecture.html#runner-types>`__.
-In case of vswitchperf specific TCs, **Sequence** runner type can be used to
-execute the testcase for given list of frame sizes.
-
-
-Section sla
-~~~~~~~~~~~
-
-In case that sla section is not defined, then testcase will be always
-considered as successful. On the other hand, it is possible to define a set of
-test metrics and their minimal values to evaluate test success. Any numeric
-value, reported by vswitchperf inside CSV result file, can be used.
-Multiple metrics can be defined as a coma separated list of items. Minimal
-value must be set separately for each metric.
-
-e.g.:
-
-.. code-block:: yaml
-
- sla:
- metrics: 'throughput_rx_fps,throughput_rx_mbps'
- throughput_rx_fps: 500000
- throughput_rx_mbps: 1000
-
-In case that any of defined metrics will be lower than defined value, then
-testcase will be marked as failed. Based on ``action`` policy, yardstick
-will either stop test execution (value ``assert``) or it will run next test
-(value ``monitor``).
-
-**NOTE** The throughput SLA (or any other SLA) cannot be set to a meaningful
-value without knowledge of the server and networking environment, possibly
-including prior testing in that environment to establish a baseline SLA level
-under well-understood circumstances.