aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMartin Klozik <martinx.klozik@intel.com>2016-10-18 12:18:27 +0000
committerGerrit Code Review <gerrit@opnfv.org>2016-10-18 12:18:27 +0000
commit7bae8ffe122b7d62eae03a2393182342f1f8fe85 (patch)
tree2640ec0c9b81effeacb76f401668935f5e418096
parent8b0cb90e2c27d25729f8ad527a18a38db11e3073 (diff)
parentc0061038f0dda5f1cfb7341820b12f5cff056097 (diff)
Merge "testpmd: Simplify GUEST's testpmd configuration"
-rw-r--r--conf/04_vnf.conf25
-rwxr-xr-xdocs/userguide/testusage.rst225
-rw-r--r--vnfs/qemu/qemu.py45
3 files changed, 123 insertions, 172 deletions
diff --git a/conf/04_vnf.conf b/conf/04_vnf.conf
index e3a4824b..e996ecce 100644
--- a/conf/04_vnf.conf
+++ b/conf/04_vnf.conf
@@ -90,12 +90,6 @@ GUEST_TIMEOUT = [180]
GUEST_BOOT_DRIVE_TYPE = ['scsi']
GUEST_SHARED_DRIVE_TYPE = ['scsi']
-# packet forwarding mode supported by testpmd; Please see DPDK documentation
-# for comprehensive list of modes supported by your version.
-# e.g. io|mac|mac_retry|macswap|flowgen|rxonly|txonly|csum|icmpecho|...
-# Note: Option "mac_retry" has been changed to "mac retry" since DPDK v16.07
-GUEST_TESTPMD_FWD_MODE = 'csum'
-
# guest loopback application method; supported options are:
# 'testpmd' - testpmd from dpdk will be built and used
# 'l2fwd' - l2fwd module provided by Huawei will be built and used
@@ -189,19 +183,16 @@ GUEST_BRIDGE_IP = ['#IP(1.1.1.5)/16']
# Guest TESTPMD configuration
# ############################
+# set of configuration parameters, which will be passed to the testpmd
+# executed inside the guest
+# Note: Testpmd must be executed in interactive mode. It means, that
+# VSPERF won't work correctly if '-i' will be removed.
+GUEST_TESTPMD_PARAMS = ['-c 0x3 -n 4 --socket-mem 512 -- '
+ '--burst=64 -i --txqflags=0xf00 '
+ '--disable-hw-vlan']
+
# packet forwarding mode supported by testpmd; Please see DPDK documentation
# for comprehensive list of modes supported by your version.
# e.g. io|mac|mac_retry|macswap|flowgen|rxonly|txonly|csum|icmpecho|...
# Note: Option "mac_retry" has been changed to "mac retry" since DPDK v16.07
GUEST_TESTPMD_FWD_MODE = ['csum']
-
-# Set the CPU mask for testpmd loopback. To bind to specific guest CPUs use -l
-# GUEST_TESTPMD_CPU_MASK = ['-l 0,1']
-GUEST_TESTPMD_CPU_MASK = ['-c 0x3']
-
-# Testpmd multi-core config. Leave at 0's for disabled. Will not enable unless
-# GUEST_NIC_QUEUES are > 0. For bi directional traffic NB_CORES must be equal
-# to (RXQ + TXQ).
-GUEST_TESTPMD_NB_CORES = [0]
-GUEST_TESTPMD_TXQ = [0]
-GUEST_TESTPMD_RXQ = [0]
diff --git a/docs/userguide/testusage.rst b/docs/userguide/testusage.rst
index 788f84a2..9ee87788 100755
--- a/docs/userguide/testusage.rst
+++ b/docs/userguide/testusage.rst
@@ -131,6 +131,7 @@ installation instructions for information on these images
vloop_vnf forwards traffic through a VM using one of:
+
* DPDK testpmd
* Linux Bridge
* l2fwd kernel Module.
@@ -206,35 +207,30 @@ Executing Vanilla OVS tests
1. If needed, recompile src for all OVS variants
-.. code-block:: console
-
- $ cd src
- $ make distclean
- $ make
+ .. code-block:: console
-2. Update your ''10_custom.conf'' file to use the appropriate variables
-for Vanilla OVS:
+ $ cd src
+ $ make distclean
+ $ make
-.. code-block:: console
+2. Update your ``10_custom.conf`` file to use Vanilla OVS:
- VSWITCH = 'OvsVanilla'
+ .. code-block:: python
-Where $PORT1 and $PORT2 are the Linux interfaces you'd like to bind
-to the vswitch.
+ VSWITCH = 'OvsVanilla'
3. Run test:
-.. code-block:: console
+ .. code-block:: console
- $ ./vsperf --conf-file=<path_to_custom_conf>
+ $ ./vsperf --conf-file=<path_to_custom_conf>
-Please note if you don't want to configure Vanilla OVS through the
-configuration file, you can pass it as a CLI argument; BUT you must
-set the ports.
+ Please note if you don't want to configure Vanilla OVS through the
+ configuration file, you can pass it as a CLI argument.
-.. code-block:: console
+ .. code-block:: console
- $ ./vsperf --vswitch OvsVanilla
+ $ ./vsperf --vswitch OvsVanilla
Executing tests with VMs
@@ -244,24 +240,24 @@ To run tests using vhost-user as guest access method:
1. Set VHOST_METHOD and VNF of your settings file to:
-.. code-block:: console
+ .. code-block:: python
- VSWITCH = 'OvsDpdkVhost'
- VNF = 'QemuDpdkVhost'
+ VSWITCH = 'OvsDpdkVhost'
+ VNF = 'QemuDpdkVhost'
2. If needed, recompile src for all OVS variants
-.. code-block:: console
+ .. code-block:: console
- $ cd src
- $ make distclean
- $ make
+ $ cd src
+ $ make distclean
+ $ make
3. Run test:
-.. code-block:: console
+ .. code-block:: console
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
+ $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
Executing tests with VMs using Vanilla OVS
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -270,39 +266,40 @@ To run tests using Vanilla OVS:
1. Set the following variables:
-.. code-block:: console
+ .. code-block:: python
- VSWITCH = 'OvsVanilla'
- VNF = 'QemuVirtioNet'
+ VSWITCH = 'OvsVanilla'
+ VNF = 'QemuVirtioNet'
- VANILLA_TGEN_PORT1_IP = n.n.n.n
- VANILLA_TGEN_PORT1_MAC = nn:nn:nn:nn:nn:nn
+ VANILLA_TGEN_PORT1_IP = n.n.n.n
+ VANILLA_TGEN_PORT1_MAC = nn:nn:nn:nn:nn:nn
- VANILLA_TGEN_PORT2_IP = n.n.n.n
- VANILLA_TGEN_PORT2_MAC = nn:nn:nn:nn:nn:nn
+ VANILLA_TGEN_PORT2_IP = n.n.n.n
+ VANILLA_TGEN_PORT2_MAC = nn:nn:nn:nn:nn:nn
- VANILLA_BRIDGE_IP = n.n.n.n
+ VANILLA_BRIDGE_IP = n.n.n.n
- or use --test-param
+ or use ``--test-params`` option
- $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
- --test-params "vanilla_tgen_tx_ip=n.n.n.n;
- vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn"
+ .. code-block:: console
+ $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
+ --test-params "vanilla_tgen_tx_ip=n.n.n.n;
+ vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn"
2. If needed, recompile src for all OVS variants
-.. code-block:: console
+ .. code-block:: console
- $ cd src
- $ make distclean
- $ make
+ $ cd src
+ $ make distclean
+ $ make
3. Run test:
-.. code-block:: console
+ .. code-block:: console
- $ ./vsperf --conf-file<path_to_custom_conf>/10_custom.conf
+ $ ./vsperf --conf-file<path_to_custom_conf>/10_custom.conf
.. _vfio-pci:
@@ -312,7 +309,7 @@ Using vfio_pci with DPDK
To use vfio with DPDK instead of igb_uio add into your custom configuration
file the following parameter:
-.. code-block:: console
+.. code-block:: python
PATHS['dpdk']['src']['modules'] = ['uio', 'vfio-pci']
@@ -406,14 +403,14 @@ deployment.
Selection of loopback application for tests with VMs
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-To select loopback application, which will perform traffic forwarding
-inside VM, following configuration parameter should be configured:
+To select the loopback applications which will forward packets inside VMs,
+the following parameter should be configured:
-.. code-block:: console
+.. code-block:: python
GUEST_LOOPBACK = ['testpmd']
-or use --test-param
+or use ``--test-params`` CLI argument:
.. code-block:: console
@@ -434,11 +431,11 @@ Guest loopback application must be configured, otherwise traffic
will not be forwarded by VM and testcases with VM related deployments
will fail. Guest loopback application is set to 'testpmd' by default.
-Note: In case that only 1 or more than 2 NICs are configured for VM,
+**NOTE:** In case that only 1 or more than 2 NICs are configured for VM,
then 'testpmd' should be used. As it is able to forward traffic between
multiple VM NIC pairs.
-Note: In case of linux_bridge, all guest NICs are connected to the same
+**NOTE:** In case of linux_bridge, all guest NICs are connected to the same
bridge inside the guest.
Multi-Queue Configuration
@@ -446,25 +443,25 @@ Multi-Queue Configuration
VSPerf currently supports multi-queue with the following limitations:
- 1. Requires QEMU 2.5 or greater and any OVS version higher than 2.5. The
- default upstream package versions installed by VSPerf satisfies this
- requirement.
+1. Requires QEMU 2.5 or greater and any OVS version higher than 2.5. The
+ default upstream package versions installed by VSPerf satisfies this
+ requirement.
- 2. Guest image must have ethtool utility installed if using l2fwd or linux
- bridge inside guest for loopback.
+2. Guest image must have ethtool utility installed if using l2fwd or linux
+ bridge inside guest for loopback.
- 3. If using OVS versions 2.5.0 or less enable old style multi-queue as shown
- in the ''02_vswitch.conf'' file.
+3. If using OVS versions 2.5.0 or less enable old style multi-queue as shown
+ in the ''02_vswitch.conf'' file.
- .. code-block:: console
+ .. code-block:: python
- OVS_OLD_STYLE_MQ = True
+ OVS_OLD_STYLE_MQ = True
To enable multi-queue for dpdk modify the ''02_vswitch.conf'' file.
- .. code-block:: console
+.. code-block:: python
- VSWITCH_DPDK_MULTI_QUEUES = 2
+ VSWITCH_DPDK_MULTI_QUEUES = 2
**NOTE:** you should consider using the switch affinity to set a pmd cpu mask
that can optimize your performance. Consider the numa of the NIC in use if this
@@ -478,9 +475,9 @@ port by port option.
To enable multi-queue on the guest modify the ''04_vnf.conf'' file.
- .. code-block:: console
+.. code-block:: python
- GUEST_NIC_QUEUES = 2
+ GUEST_NIC_QUEUES = [2]
Enabling multi-queue at the guest will add multiple queues to each NIC port when
qemu launches the guest.
@@ -492,13 +489,12 @@ multi-queue on the guest is sufficient for Vanilla OVS multi-queue.
Testpmd should be configured to take advantage of multi-queue on the guest if
using DPDKVhostUser. This can be done by modifying the ''04_vnf.conf'' file.
- .. code-block:: console
-
- GUEST_TESTPMD_CPU_MASK = '-l 0,1,2,3,4'
+.. code-block:: python
- GUEST_TESTPMD_NB_CORES = 4
- GUEST_TESTPMD_TXQ = 2
- GUEST_TESTPMD_RXQ = 2
+ GUEST_TESTPMD_PARAMS = ['-l 0,1,2,3,4 -n 4 --socket-mem 512 -- '
+ '--burst=64 -i --txqflags=0xf00 '
+ '--nb-cores=4 --rxq=2 --txq=2 '
+ '--disable-hw-vlan']
**NOTE:** The guest SMP cores must be configured to allow for testpmd to use the
optimal number of cores to take advantage of the multiple guest queues.
@@ -508,11 +504,11 @@ by binding vhost-net threads to cpus. This can be done by enabling the affinity
in the ''04_vnf.conf'' file. This can be done to non multi-queue enabled
configurations as well as there will be 2 vhost-net threads.
- .. code-block:: console
+.. code-block:: python
- VSWITCH_VHOST_NET_AFFINITIZATION = True
+ VSWITCH_VHOST_NET_AFFINITIZATION = True
- VSWITCH_VHOST_CPU_MAP = [4,5,8,11]
+ VSWITCH_VHOST_CPU_MAP = [4,5,8,11]
**NOTE:** This method of binding would require a custom script in a real
environment.
@@ -522,65 +518,64 @@ on the same numa as the NIC in use if possible/applicable. Testpmd should be
assigned at least (nb_cores +1) total cores with the cpu mask.
The following CLI parameters override the corresponding configuration settings:
- 1. guest_nic_queues, which overrides all GUEST_NIC_QUEUES values
- 2. guest_testpmd_txq, which overrides all GUEST_TESTPMD_TXQ
- 3. guest_testpmd_rxq, which overrides all GUEST_TESTPMD_RXQ
- 4. guest_testpmd_nb_cores, which overrides all GUEST_TESTPMD_NB_CORES
- values
- 5. guest_testpmd_cpu_mask, which overrides all GUEST_TESTPMD_CPU_MASK
- values
- 6. vswitch_dpdk_multi_queues, which overrides VSWITCH_DPDK_MULTI_QUEUES
- 7. guest_smp, which overrides all GUEST_SMP values
- 8. guest_core_binding, which overrides all GUEST_CORE_BINDING values
+
+1. ``guest_nic_queues``, which overrides all ``GUEST_NIC_QUEUES`` values
+2. ``guest_testpmd_params``, which overrides all ``GUEST_TESTPMD_PARAMS``
+ values
+3. ``vswitch_dpdk_multi_queues``, which overrides ``VSWITCH_DPDK_MULTI_QUEUES``
+4. ``guest_smp``, which overrides all ``GUEST_SMP`` values
+5. ``guest_core_binding``, which overrides all ``GUEST_CORE_BINDING`` values
Executing Packet Forwarding tests
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-To select application, which will perform packet forwarding,
-following configuration parameter should be configured:
+To select the applications which will forward packets,
+the following parameters should be configured:
- .. code-block:: console
+.. code-block:: python
+
+ VSWITCH = 'none'
+ PKTFWD = 'TestPMD'
- VSWITCH = 'none'
- PKTFWD = 'TestPMD'
+or use ``--vswitch`` and ``--fwdapp`` CLI arguments:
- or use --vswitch and --fwdapp
+.. code-block:: console
- $ ./vsperf --conf-file user_settings.py
- --vswitch none
- --fwdapp TestPMD
+ $ ./vsperf --conf-file user_settings.py
+ --vswitch none
+ --fwdapp TestPMD
Supported Packet Forwarding applications are:
- .. code-block:: console
+.. code-block:: console
- 'testpmd' - testpmd from dpdk
+ 'testpmd' - testpmd from dpdk
1. Update your ''10_custom.conf'' file to use the appropriate variables
-for selected Packet Forwarder:
-
- .. code-block:: console
-
- # testpmd configuration
- TESTPMD_ARGS = []
- # packet forwarding mode supported by testpmd; Please see DPDK documentation
- # for comprehensive list of modes supported by your version.
- # e.g. io|mac|mac_retry|macswap|flowgen|rxonly|txonly|csum|icmpecho|...
- # Note: Option "mac_retry" has been changed to "mac retry" since DPDK v16.07
- TESTPMD_FWD_MODE = 'csum'
- # checksum calculation layer: ip|udp|tcp|sctp|outer-ip
- TESTPMD_CSUM_LAYER = 'ip'
- # checksum calculation place: hw (hardware) | sw (software)
- TESTPMD_CSUM_CALC = 'sw'
- # recognize tunnel headers: on|off
- TESTPMD_CSUM_PARSE_TUNNEL = 'off'
+ for selected Packet Forwarder:
+
+ .. code-block:: python
+
+ # testpmd configuration
+ TESTPMD_ARGS = []
+ # packet forwarding mode supported by testpmd; Please see DPDK documentation
+ # for comprehensive list of modes supported by your version.
+ # e.g. io|mac|mac_retry|macswap|flowgen|rxonly|txonly|csum|icmpecho|...
+ # Note: Option "mac_retry" has been changed to "mac retry" since DPDK v16.07
+ TESTPMD_FWD_MODE = 'csum'
+ # checksum calculation layer: ip|udp|tcp|sctp|outer-ip
+ TESTPMD_CSUM_LAYER = 'ip'
+ # checksum calculation place: hw (hardware) | sw (software)
+ TESTPMD_CSUM_CALC = 'sw'
+ # recognize tunnel headers: on|off
+ TESTPMD_CSUM_PARSE_TUNNEL = 'off'
2. Run test:
- .. code-block:: console
+ .. code-block:: console
- $ ./vsperf --conf-file <path_to_settings_py>
+ $ ./vsperf --conf-file <path_to_settings_py>
VSPERF modes of operation
^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -665,7 +660,7 @@ By default the vswitchd is launched with 1Gb of memory, to change
this, modify --socket-mem parameter in conf/02_vswitch.conf to allocate
an appropriate amount of memory:
-.. code-block:: console
+.. code-block:: python
VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0']
VSWITCHD_DPDK_CONFIG = {
diff --git a/vnfs/qemu/qemu.py b/vnfs/qemu/qemu.py
index ae0056dc..67dbfab4 100644
--- a/vnfs/qemu/qemu.py
+++ b/vnfs/qemu/qemu.py
@@ -401,48 +401,13 @@ class IVnfQemu(IVnf):
self.execute_and_wait('make clean')
self.execute_and_wait('make')
- # get multi-queue settings from CLI
- guest_testpmd_txq = int(get_test_param('guest_testpmd_txq', 0))
- if guest_testpmd_txq:
- override_list = [guest_testpmd_txq] * (self._number + 1)
- S.setValue('GUEST_TESTPMD_TXQ', override_list)
-
- guest_testpmd_rxq = int(get_test_param('guest_testpmd_rxq', 0))
- if guest_testpmd_rxq:
- override_list = [guest_testpmd_rxq] * (self._number + 1)
- S.setValue('GUEST_TESTPMD_RXQ', override_list)
-
- guest_testpmd_nb_cores = \
- int(get_test_param('guest_testpmd_nb_cores', 0))
- if guest_testpmd_nb_cores:
- override_list = [guest_testpmd_nb_cores] * (self._number + 1)
- S.setValue('GUEST_TESTPMD_NB_CORES', override_list)
-
- guest_testpmd_cpu_mask = \
- int(get_test_param('guest_testpmd_cpu_mask', 0))
- if guest_testpmd_cpu_mask:
- override_list = [guest_testpmd_cpu_mask] * (self._number + 1)
- S.setValue('GUEST_TESTPMD_CPU_MASK', override_list)
+ # get testpmd settings from CLI
+ testpmd_params = get_test_param('guest_testpmd_params',
+ S.getValue('GUEST_TESTPMD_PARAMS')[self._number])
- if int(S.getValue('GUEST_NIC_QUEUES')[self._number]):
- self.execute_and_wait(
- './testpmd {} -n4 --socket-mem 512 --'.format(
- S.getValue('GUEST_TESTPMD_CPU_MASK')[self._number]) +
- ' --burst=64 -i --txqflags=0xf00 ' +
- '--nb-cores={} --rxq={} --txq={} '.format(
- S.getValue('GUEST_TESTPMD_NB_CORES')[self._number],
- S.getValue('GUEST_TESTPMD_TXQ')[self._number],
- S.getValue('GUEST_TESTPMD_RXQ')[self._number]) +
- '--disable-hw-vlan', 60, "Done")
- else:
- self.execute_and_wait(
- './testpmd {} -n 4 --socket-mem 512 --'.format(
- S.getValue('GUEST_TESTPMD_CPU_MASK')[self._number]) +
- ' --burst=64 -i --txqflags=0xf00 ' +
- '--disable-hw-vlan', 60, "Done")
+ self.execute_and_wait( './testpmd {}'.format(testpmd_params), 60, "Done")
self.execute('set fwd ' + self._testpmd_fwd_mode, 1)
- self.execute_and_wait('start', 20,
- 'TX RS bit threshold=.+ - TXQ flags=0xf00')
+ self.execute_and_wait('start', 20, 'testpmd>')
def _configure_l2fwd(self):
"""