summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--tests/vHello_VES.sh5
-rw-r--r--tests/vHello_VES_3Node.sh430
2 files changed, 3 insertions, 432 deletions
diff --git a/tests/vHello_VES.sh b/tests/vHello_VES.sh
index bbddfa5..91d615a 100644
--- a/tests/vHello_VES.sh
+++ b/tests/vHello_VES.sh
@@ -124,7 +124,8 @@ setup () {
chmod 755 /opt/tacker/*.sh
echo "$0: $(date) tacker-setup part 1"
- bash utils/tacker-setup.sh init
+ wget https://git.opnfv.org/models/plain/tests/utils/tacker-setup.sh -O /tmp/tacker-setup.sh
+ bash /tmp/tacker-setup.sh init
if [ $? -eq 1 ]; then fail; fi
echo "$0: $(date) tacker-setup part 2"
@@ -166,8 +167,8 @@ copy_blueprint() {
fi
echo "$0: $(date) copy tosca-vnfd-hello-ves to blueprints folder"
+ if [[ ! -d /opt/tacker/blueprints ]]; then mkdir /opt/tacker/blueprints; fi
cp -r blueprints/tosca-vnfd-hello-ves /opt/tacker/blueprints/tosca-vnfd-hello-ves
- cp $0 /opt/tacker/.
}
start() {
diff --git a/tests/vHello_VES_3Node.sh b/tests/vHello_VES_3Node.sh
deleted file mode 100644
index cc85ebc..0000000
--- a/tests/vHello_VES_3Node.sh
+++ /dev/null
@@ -1,430 +0,0 @@
-#!/bin/bash
-# Copyright 2016 AT&T Intellectual Property, Inc
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# What this is: Deployment test for the VES agent and collector based
-# upon the Tacker Hello World blueprint
-#
-# Status: this is a work in progress, under test.
-#
-# How to use:
-# $ git clone https://gerrit.opnfv.org/gerrit/ves
-# $ cd ves/tests
-# $ bash vHello_VES.sh [setup|start|run|test|stop|clean] [VDU1|VDU2|VDU3]
-# [monitor|traffic|pause|nic]
-# setup: setup test environment
-# start: install blueprint and run test
-# run: setup test environment and run test
-# test: run test tools/scenario - see below
-# stop: stop test and uninstall blueprint
-# clean: cleanup after test
-# Test:
-# monitor: attach to the collector VM and run the VES Monitor
-# traffic: generate some traffic
-# pause: pause the VNF (web server) for a minute to generate a state change
-# VDU1|VDU2
-# nic: timed ifdown/ifup to generate a NIC fault report (not yet implemented)
-
-trap 'fail' ERR
-
-pass() {
- echo "$0: $(date) Hooray!"
- exit 0
-}
-
-fail() {
- echo "$0: $(date) Test Failed!"
- exit 1
-}
-
-get_floating_net () {
- network_ids=($(neutron net-list|grep -v "+"|grep -v name|awk '{print $2}'))
- for id in ${network_ids[@]}; do
- [[ $(neutron net-show ${id}|grep 'router:external'|grep -i "true") != "" ]] && FLOATING_NETWORK_ID=${id}
- done
- if [[ $FLOATING_NETWORK_ID ]]; then
- FLOATING_NETWORK_NAME=$(openstack network show $FLOATING_NETWORK_ID | awk "/ name / { print \$4 }")
- else
- echo "$0: $(date) Floating network not found"
- exit 1
- fi
-}
-
-try () {
- count=$1
- $3
- while [[ $? -eq 1 && $count -gt 0 ]]
- do
- sleep $2
- let count=$count-1
- $3
- done
- if [[ $count -eq 0 ]]; then echo "$0: $(date) Command \"$3\" was not successful after $1 tries"; fi
-}
-
-setup () {
- echo "$0: $(date) Started"
- echo "$0: $(date) Setup temp test folder /tmp/tacker and copy this script there"
- mkdir -p /tmp/tacker
- chmod 777 /tmp/tacker/
- cp $0 /tmp/tacker/.
- chmod 755 /tmp/tacker/*.sh
-
- echo "$0: $(date) tacker-setup part 1"
- wget https://git.opnfv.org/cgit/models/plain/tests/utils/tacker-setup.sh -O /tmp/tacker/tacker-setup.sh
- bash /tmp/tacker/tacker-setup.sh tacker-cli init
-
- echo "$0: $(date) tacker-setup part 2"
- CONTAINER=$(sudo docker ps -l | awk "/tacker/ { print \$1 }")
- dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'`
- if [ "$dist" == "Ubuntu" ]; then
- echo "$0: $(date) JOID workaround for Colorado - enable ML2 port security"
- juju set neutron-api enable-ml2-port-security=true
-
- echo "$0: $(date) Execute tacker-setup.sh in the container"
- sudo docker exec -it $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh tacker-cli setup
- else
- echo "$0: $(date) Copy private key to the container (needed for later install steps)"
- cp ~/.ssh/id_rsa /tmp/tacker/id_rsa
- echo "$0: $(date) Execute tacker-setup.sh in the container"
- sudo docker exec -i -t $CONTAINER /bin/bash /tmp/tacker/tacker-setup.sh tacker-cli setup
- fi
-
- echo "$0: $(date) reset blueprints folder"
- if [[ -d /tmp/tacker/blueprints/tosca-vnfd-hello-ves ]]; then rm -rf /tmp/tacker/blueprints/tosca-vnfd-hello-ves; fi
- mkdir -p /tmp/tacker/blueprints/tosca-vnfd-hello-ves
-
- echo "$0: $(date) copy tosca-vnfd-hello-ves to blueprints folder"
- cp -r blueprints/tosca-vnfd-hello-ves /tmp/tacker/blueprints
-
- # Following two steps are in testing still. The guestfish step needs work.
-
- # echo "$0: $(date) Create Nova key pair"
- # mkdir -p ~/.ssh
- # nova keypair-delete vHello
- # nova keypair-add vHello > /tmp/tacker/vHello.pem
- # chmod 600 /tmp/tacker/vHello.pem
- # pubkey=$(nova keypair-show vHello | grep "Public key:" | sed -- 's/Public key: //g')
- # nova keypair-show vHello | grep "Public key:" | sed -- 's/Public key: //g' >/tmp/tacker/vHello.pub
-
- echo "$0: $(date) Inject key into xenial server image"
- # wget http://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img
- # sudo yum install -y libguestfs-tools
- # guestfish <<EOF
-#add xenial-server-cloudimg-amd64-disk1.img
-#run
-#mount /dev/sda1 /
-#mkdir /home/ubuntu
-#mkdir /home/ubuntu/.ssh
-#cat <<EOM >/home/ubuntu/.ssh/authorized_keys
-#$pubkey
-#EOM
-#exit
-#chown -R ubuntu /home/ubuntu
-#EOF
-
- # Using pre-key-injected image for now, vHello.pem as provided in the blueprint
- if [ ! -f /tmp/xenial-server-cloudimg-amd64-disk1.img ]; then
- wget -O /tmp/xenial-server-cloudimg-amd64-disk1.img http://artifacts.opnfv.org/models/images/xenial-server-cloudimg-amd64-disk1.img
- fi
- cp blueprints/tosca-vnfd-hello-ves/vHello.pem /tmp/tacker
- chmod 600 /tmp/tacker/vHello.pem
-
- echo "$0: $(date) setup OpenStack CLI environment"
- source /tmp/tacker/admin-openrc.sh
-
- echo "$0: $(date) Setup image_id"
- image_id=$(openstack image list | awk "/ models-xenial-server / { print \$2 }")
- if [[ -z "$image_id" ]]; then glance --os-image-api-version 1 image-create --name models-xenial-server --disk-format qcow2 --file /tmp/xenial-server-cloudimg-amd64-disk1.img --container-format bare; fi
-
- echo "$0: $(date) Completed"
-}
-
-start() {
- echo "$0: $(date) Started"
- echo "$0: $(date) setup OpenStack CLI environment"
- source /tmp/tacker/admin-openrc.sh
-
- echo "$0: $(date) create VNFD"
- cd /tmp/tacker/blueprints/tosca-vnfd-hello-ves
- tacker vnfd-create --vnfd-file blueprint.yaml --name hello-ves
- if [ $? -eq 1 ]; then fail; fi
-
- echo "$0: $(date) create VNF"
- tacker vnf-create --vnfd-name hello-ves --name hello-ves
- if [ $? -eq 1 ]; then fail; fi
-
- echo "$0: $(date) wait for hello-ves to go ACTIVE"
- active=""
- while [[ -z $active ]]
- do
- active=$(tacker vnf-show hello-ves | grep ACTIVE)
- if [ "$(tacker vnf-show hello-ves | grep -c ERROR)" == "1" ]; then
- echo "$0: $(date) hello-ves VNF creation failed with state ERROR"
- fail
- fi
- sleep 10
- done
-
- echo "$0: $(date) directly set port security on ports (bug/unsupported in Mitaka Tacker?)"
- vdus="VDU1 VDU2 VDU3 VDU4"
- vdui="1 2 3 4"
- declare -a vdu_id=()
- declare -a vdu_ip=()
- declare -a vdu_url=()
- HEAT_ID=$(tacker vnf-show hello-ves | awk "/instance_id/ { print \$4 }")
- vdu_id[1]=$(openstack stack resource list $HEAT_ID | awk "/VDU1 / { print \$4 }")
- vdu_id[2]=$(openstack stack resource list $HEAT_ID | awk "/VDU2 / { print \$4 }")
- vdu_id[3]=$(openstack stack resource list $HEAT_ID | awk "/VDU3 / { print \$4 }")
- vdu_id[4]=$(openstack stack resource list $HEAT_ID | awk "/VDU4 / { print \$4 }")
-
-cat >/tmp/grep <<EOF
-${vdu_id[1]}
-${vdu_id[2]}
-${vdu_id[3]}
-${vdu_id[4]}
-EOF
- id=($(neutron port-list|grep -v "+"|grep -v name|awk '{print $2}'))
- for id in ${id[@]}; do
- if [[ $(neutron port-show $id | grep -f /tmp/grep) ]]; then
- neutron port-update ${id} --port-security-enabled=True
- fi
- done
-
- echo "$0: $(date) directly assign security group (unsupported in Mitaka Tacker)"
- if [[ $(openstack security group list | awk "/ vHello / { print \$2 }") ]]; then openstack security group delete vHello; fi
- openstack security group create vHello
- openstack security group rule create --ingress --protocol TCP --dst-port 22:22 vHello
- openstack security group rule create --ingress --protocol TCP --dst-port 80:80 vHello
- for i in $vdui; do
- openstack server add security group ${vdu_id[$i]} vHello
- openstack server add security group ${vdu_id[$i]} default
- done
-
- echo "$0: $(date) associate floating IPs"
- get_floating_net
- for i in $vdui; do
- vdu_ip[$i]=$(openstack floating ip create $FLOATING_NETWORK_NAME | awk "/floating_ip_address/ { print \$4 }")
- nova floating-ip-associate ${vdu_id[$i]} ${vdu_ip[$i]}
- done
-
- echo "$0: $(date) get web server addresses"
- vdu_url[1]="http://${vdu_ip[1]}"
- vdu_url[2]="http://${vdu_ip[3]}"
- vdu_url[3]="http://${vdu_ip[3]}"
- vdu_url[4]="http://${vdu_ip[4]}:30000/eventListener/v1"
-
- if [[ -f /tmp/tacker/id_rsa ]]; then
- echo "$0: $(date) setup private key for ssh to hypervisors"
- cp -p /tmp/tacker/id_rsa ~/.ssh/id_rsa
- chown root ~/.ssh/id_rsa
- chmod 600 ~/.ssh/id_rsa
- fi
-
- echo "$0: $(date) start collectd agent on bare metal hypervisor hosts"
- hosts=($(openstack hypervisor list | grep -v Hostname | grep -v "+" | awk '{print $4}'))
- for host in ${hosts[@]}; do
- ip=$(openstack hypervisor show $host | grep host_ip | awk '{print $4}')
- if [[ "$OS_CLOUDNAME" == "overcloud" ]]; then
- u="heat-admin"
- p=""
- else
- u="ubuntu"
- p=":ubuntu"
- fi
- scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/start.sh $u@$ip:/home/$u/start.sh
- ssh -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no $u$p@$ip \
- "nohup bash /home/$u/start.sh collectd $ip ${vdu_ip[4]} hello world > /dev/null 2>&1 &"
- done
-
- echo "$0: $(date) wait 30 seconds for server SSH to be available"
- sleep 30
-
- echo "$0: $(date) Copy startup script to the VMs"
- for i in $vdui; do
- ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[$i]} "sudo chown ubuntu /home/ubuntu"
- scp -i /tmp/tacker/vHello.pem -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/start.sh ubuntu@${vdu_ip[$i]}:/home/ubuntu/start.sh
- done
-
- echo "$0: $(date) start vHello webserver in VDU1 at ${vdu_ip[1]}"
- ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no \
- ubuntu@${vdu_ip[1]} "nohup bash /home/ubuntu/start.sh webserver ${vdu_id[1]} ${vdu_ip[4]} hello world > /dev/null 2>&1 &"
-
- echo "$0: $(date) start vHello webserver in VDU2 at ${vdu_ip[2]}"
- ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no \
- ubuntu@${vdu_ip[2]} "nohup bash /home/ubuntu/start.sh webserver ${vdu_id[2]} ${vdu_ip[4]} hello world > /dev/null 2>&1 &"
-
- echo "$0: $(date) start LB in VDU3 at ${vdu_ip[3]}"
- ssh -i /tmp/tacker/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no \
- ubuntu@${vdu_ip[3]} "nohup bash /home/ubuntu/start.sh lb ${vdu_id[3]} ${vdu_ip[4]} hello world ${vdu_ip[1]} ${vdu_ip[2]} > /dev/null 2>&1 &"
-
- echo "$0: $(date) start Monitor in VDU4 at ${vdu_ip[4]}"
- # Replacing the default collector with monitor.py which has processing logic as well
- scp -i /tmp/tacker/vHello.pem -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no /tmp/tacker/blueprints/tosca-vnfd-hello-ves/monitor.py ubuntu@${vdu_ip[4]}:/home/ubuntu/monitor.py
- ssh -i /tmp/tacker/vHello.pem -t -t -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@${vdu_ip[4]} "bash /home/ubuntu/start.sh monitor ${vdu_id[1]} ${vdu_id[2]} ${vdu_id[3]} hello world"
-
-# echo "$0: $(date) verify vHello server is running at http://${vdu_ip[3]}"
-# apt-get install -y curl
-# count=10
-# while [[ $count -gt 0 ]]
-# do
-# sleep 60
-# let count=$count-1
-# if [[ $(curl http://${vdu_ip[3]} | grep -c "Hello World") > 0 ]]; then pass; fi
-# done
-# fail
-}
-
-stop() {
- echo "$0: $(date) setup OpenStack CLI environment"
- source /tmp/tacker/admin-openrc.sh
-
- echo "$0: $(date) uninstall vHello blueprint via CLI"
- vid=($(tacker vnf-list|grep hello-ves|awk '{print $2}')); for id in ${vid[@]}; do tacker vnf-delete ${id}; done
- vid=($(tacker vnfd-list|grep hello-ves|awk '{print $2}')); for id in ${vid[@]}; do tacker vnfd-delete ${id}; done
-# Need to remove the floatingip deletion or make it specific to the vHello VM
- fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in ${fip[@]}; do neutron floatingip-delete ${id}; done
- sg=($(openstack security group list|grep vHello|awk '{print $2}'))
- for id in ${sg[@]}; do try 10 5 "openstack security group delete ${id}"; done
-
- echo "$0: $(date) remove collectd agent on bare metal hypervisor hosts"
- hosts=($(openstack hypervisor list | grep -v Hostname | grep -v "+" | awk '{print $4}'))
- for host in ${hosts[@]}; do
- ip=$(openstack hypervisor show $host | grep host_ip | awk '{print $4}')
- if [[ "$OS_CLOUDNAME" == "overcloud" ]]; then
- u="heat-admin"
- p=""
- else
- u="ubuntu"
- p=":ubuntu"
- fi
- ssh -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no $u$p@$ip <<'EOF'
-dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'`
-if [ "$dist" == "Ubuntu" ]; then
- sudo service collectd stop
- sudo apt-get remove -y collectd
- sudo rm /etc/collectd/collectd.conf
-else
- sudo service collectd stop
- sudo yum remove -y collectd
- sudo rm /etc/collectd.conf
-fi
-rm -rf $HOME/OpenStackBarcelonaDemo
-EOF
- done
-}
-
-#
-# Test tools and scenarios
-#
-
-get_vdu_ip () {
- source /tmp/tacker/admin-openrc.sh
-
- echo "$0: $(date) find VM IP for $1"
- ip=$(openstack server list | awk "/$1/ { print \$10 }")
-}
-
-monitor () {
- echo "$0: $(date) Start the VES Monitor in VDU4 - Stop first if running"
- get_vdu_ip VDU4
- sudo cp /tmp/tacker/vHello.pem /tmp/vHello.pem
- sudo chown $USER:$USER /tmp/vHello.pem
- chmod 600 /tmp/vHello.pem
- ssh -t -t -i /tmp/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$ip << 'EOF'
-sudo kill $(ps -ef | grep evel-test-collector | awk '{print $2}')
-python monitor.py --config evel-test-collector/config/collector.conf --section default
-EOF
-}
-
-traffic () {
- echo "$0: $(date) Generate some traffic, somewhat randomly"
- get_vdu_ip VDU3
- ns="0 00 000"
- while true
- do
- for n in $ns; do
- sleep .$n$[ ( $RANDOM % 10 ) + 1 ]s
- curl -s http://$ip > /dev/null
- done
- done
-}
-
-pause () {
- echo "$0: $(date) Pause the VNF (web server) in $1 for 30 seconds to generate a state change fault report (Stopped)"
- get_vdu_ip $1
- ssh -i /tmp/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$ip "sudo docker pause vHello"
- sleep 20
- echo "$0: $(date) Unpausing the VNF to generate a state change fault report (Started)"
- ssh -i /tmp/vHello.pem -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no ubuntu@$ip "sudo docker unpause vHello"
-}
-
-forward_to_container () {
- echo "$0: $(date) pass $1 command to this script in the tacker container"
- CONTAINER=$(sudo docker ps -a | awk "/tacker/ { print \$1 }")
- sudo docker exec $CONTAINER /bin/bash /tmp/tacker/vHello_VES.sh $1 $1
- if [ $? -eq 1 ]; then fail; fi
-}
-
-dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'`
-case "$1" in
- setup)
- setup
- pass
- ;;
- run)
- setup
- forward_to_container start
- pass
- ;;
- start|stop)
- if [[ $# -eq 1 ]]; then forward_to_container $1
- else
- # running inside the tacker container, ready to go
- $1
- fi
- pass
- ;;
- traffic)
- $1
- pass
- ;;
- test)
- $2 $3
- ;;
- clean)
- echo "$0: $(date) Uninstall Tacker and test environment"
- bash /tmp/tacker/tacker-setup.sh $1 clean
- pass
- ;;
- *)
- echo "usage: bash vHello_VES.sh [setup|start|run|clean]"
- echo "setup: setup test environment"
- echo "start: install blueprint and run test"
- echo "run: setup test environment and run test"
- echo "stop: stop test and uninstall blueprint"
- echo "clean: cleanup after test"
- echo "usage: bash vHello_VES.sh [setup|start|run|test|stop|clean] [monitor|traffic|pause|nic]"
- echo "setup: setup test environment"
- echo "start: install blueprint and run test"
- echo "run: setup test environment and run test"
- echo "test: run test tools/scenario - see below"
- echo "stop: stop test and uninstall blueprint"
- echo "clean: cleanup after test"
- echo "Test:"
- echo " monitor: attach to the collector VM and run the VES Monitor"
- echo " traffic: generate some traffic"
- echo " pause: pause the VNF (web server) for a minute to generate a state change"
- fail
-esac