diff options
Diffstat (limited to 'src/ceph/doc/rbd/rbd-mirroring.rst')
-rw-r--r-- | src/ceph/doc/rbd/rbd-mirroring.rst | 318 |
1 files changed, 318 insertions, 0 deletions
diff --git a/src/ceph/doc/rbd/rbd-mirroring.rst b/src/ceph/doc/rbd/rbd-mirroring.rst new file mode 100644 index 0000000..989f1fc --- /dev/null +++ b/src/ceph/doc/rbd/rbd-mirroring.rst @@ -0,0 +1,318 @@ +=============== + RBD Mirroring +=============== + +.. index:: Ceph Block Device; mirroring + +RBD images can be asynchronously mirrored between two Ceph clusters. This +capability uses the RBD journaling image feature to ensure crash-consistent +replication between clusters. Mirroring is configured on a per-pool basis +within peer clusters and can be configured to automatically mirror all +images within a pool or only a specific subset of images. Mirroring is +configured using the ``rbd`` command. The ``rbd-mirror`` daemon is responsible +for pulling image updates from the remote, peer cluster and applying them to +the image within the local cluster. + +.. note:: RBD mirroring requires the Ceph Jewel release or later. + +.. important:: To use RBD mirroring, you must have two Ceph clusters, each + running the ``rbd-mirror`` daemon. + +Pool Configuration +================== + +The following procedures demonstrate how to perform the basic administrative +tasks to configure mirroring using the ``rbd`` command. Mirroring is +configured on a per-pool basis within the Ceph clusters. + +The pool configuration steps should be performed on both peer clusters. These +procedures assume two clusters, named "local" and "remote", are accessible from +a single host for clarity. + +See the `rbd`_ manpage for additional details of how to connect to different +Ceph clusters. + +.. note:: The cluster name in the following examples corresponds to a Ceph + configuration file of the same name (e.g. /etc/ceph/remote.conf). See the + `ceph-conf`_ documentation for how to configure multiple clusters. + +.. note:: Images in a given pool will be mirrored to a pool with the same name + on the remote cluster. Images using a separate data-pool will use a data-pool + with the same name on the remote cluster. E.g., if an image being mirrored is + in the ``rbd`` pool on the local cluster and using a data-pool called + ``rbd-ec``, pools called ``rbd`` and ``rbd-ec`` must exist on the remote + cluster and will be used for mirroring the image. + +Enable Mirroring +---------------- + +To enable mirroring on a pool with ``rbd``, specify the ``mirror pool enable`` +command, the pool name, and the mirroring mode:: + + rbd mirror pool enable {pool-name} {mode} + +The mirroring mode can either be ``pool`` or ``image``: + +* **pool**: When configured in ``pool`` mode, all images in the pool with the + journaling feature enabled are mirrored. +* **image**: When configured in ``image`` mode, mirroring needs to be + `explicitly enabled`_ on each image. + +For example:: + + rbd --cluster local mirror pool enable image-pool pool + rbd --cluster remote mirror pool enable image-pool pool + +Disable Mirroring +----------------- + +To disable mirroring on a pool with ``rbd``, specify the ``mirror pool disable`` +command and the pool name:: + + rbd mirror pool disable {pool-name} + +When mirroring is disabled on a pool in this way, mirroring will also be +disabled on any images (within the pool) for which mirroring was enabled +explicitly. + +For example:: + + rbd --cluster local mirror pool disable image-pool + rbd --cluster remote mirror pool disable image-pool + +Add Cluster Peer +---------------- + +In order for the ``rbd-mirror`` daemon to discover its peer cluster, the peer +needs to be registered to the pool. To add a mirroring peer Ceph cluster with +``rbd``, specify the ``mirror pool peer add`` command, the pool name, and a +cluster specification:: + + rbd mirror pool peer add {pool-name} {client-name}@{cluster-name} + +For example:: + + rbd --cluster local mirror pool peer add image-pool client.remote@remote + rbd --cluster remote mirror pool peer add image-pool client.local@local + +Remove Cluster Peer +------------------- + +To remove a mirroring peer Ceph cluster with ``rbd``, specify the +``mirror pool peer remove`` command, the pool name, and the peer UUID +(available from the ``rbd mirror pool info`` command):: + + rbd mirror pool peer remove {pool-name} {peer-uuid} + +For example:: + + rbd --cluster local mirror pool peer remove image-pool 55672766-c02b-4729-8567-f13a66893445 + rbd --cluster remote mirror pool peer remove image-pool 60c0e299-b38f-4234-91f6-eed0a367be08 + +Image Configuration +=================== + +Unlike pool configuration, image configuration only needs to be performed against +a single mirroring peer Ceph cluster. + +Mirrored RBD images are designated as either primary or non-primary. This is a +property of the image and not the pool. Images that are designated as +non-primary cannot be modified. + +Images are automatically promoted to primary when mirroring is first enabled on +an image (either implicitly if the pool mirror mode was **pool** and the image +has the journaling image feature enabled, or `explicitly enabled`_ by the +``rbd`` command). + +Enable Image Journaling Support +------------------------------- + +RBD mirroring uses the RBD journaling feature to ensure that the replicated +image always remains crash-consistent. Before an image can be mirrored to +a peer cluster, the journaling feature must be enabled. The feature can be +enabled at image creation time by providing the +``--image-feature exclusive-lock,journaling`` option to the ``rbd`` command. + +Alternatively, the journaling feature can be dynamically enabled on +pre-existing RBD images. To enable journaling with ``rbd``, specify +the ``feature enable`` command, the pool and image name, and the feature name:: + + rbd feature enable {pool-name}/{image-name} {feature-name} + +For example:: + + rbd --cluster local feature enable image-pool/image-1 journaling + +.. note:: The journaling feature is dependent on the exclusive-lock feature. If + the exclusive-lock feature is not already enabled, it should be enabled prior + to enabling the journaling feature. + +.. tip:: You can enable journaling on all new images by default by adding + ``rbd default features = 125`` to your Ceph configuration file. + +Enable Image Mirroring +---------------------- + +If the mirroring is configured in ``image`` mode for the image's pool, then it +is necessary to explicitly enable mirroring for each image within the pool. +To enable mirroring for a specific image with ``rbd``, specify the +``mirror image enable`` command along with the pool and image name:: + + rbd mirror image enable {pool-name}/{image-name} + +For example:: + + rbd --cluster local mirror image enable image-pool/image-1 + +Disable Image Mirroring +----------------------- + +To disable mirroring for a specific image with ``rbd``, specify the +``mirror image disable`` command along with the pool and image name:: + + rbd mirror image disable {pool-name}/{image-name} + +For example:: + + rbd --cluster local mirror image disable image-pool/image-1 + +Image Promotion and Demotion +---------------------------- + +In a failover scenario where the primary designation needs to be moved to the +image in the peer Ceph cluster, access to the primary image should be stopped +(e.g. power down the VM or remove the associated drive from a VM), demote the +current primary image, promote the new primary image, and resume access to the +image on the alternate cluster. + +.. note:: RBD only provides the necessary tools to facilitate an orderly + failover of an image. An external mechanism is required to coordinate the + full failover process (e.g. closing the image before demotion). + +To demote a specific image to non-primary with ``rbd``, specify the +``mirror image demote`` command along with the pool and image name:: + + rbd mirror image demote {pool-name}/{image-name} + +For example:: + + rbd --cluster local mirror image demote image-pool/image-1 + +To demote all primary images within a pool to non-primary with ``rbd``, specify +the ``mirror pool demote`` command along with the pool name:: + + rbd mirror pool demote {pool-name} + +For example:: + + rbd --cluster local mirror pool demote image-pool + +To promote a specific image to primary with ``rbd``, specify the +``mirror image promote`` command along with the pool and image name:: + + rbd mirror image promote [--force] {pool-name}/{image-name} + +For example:: + + rbd --cluster remote mirror image promote image-pool/image-1 + +To promote all non-primary images within a pool to primary with ``rbd``, specify +the ``mirror pool promote`` command along with the pool name:: + + rbd mirror pool promote [--force] {pool-name} + +For example:: + + rbd --cluster local mirror pool promote image-pool + +.. tip:: Since the primary / non-primary status is per-image, it is possible to + have two clusters split the IO load and stage failover / failback. + +.. note:: Promotion can be forced using the ``--force`` option. Forced + promotion is needed when the demotion cannot be propagated to the peer + Ceph cluster (e.g. Ceph cluster failure, communication outage). This will + result in a split-brain scenario between the two peers and the image will no + longer be in-sync until a `force resync command`_ is issued. + +Force Image Resync +------------------ + +If a split-brain event is detected by the ``rbd-mirror`` daemon, it will not +attempt to mirror the affected image until corrected. To resume mirroring for an +image, first `demote the image`_ determined to be out-of-date and then request a +resync to the primary image. To request an image resync with ``rbd``, specify the +``mirror image resync`` command along with the pool and image name:: + + rbd mirror image resync {pool-name}/{image-name} + +For example:: + + rbd mirror image resync image-pool/image-1 + +.. note:: The ``rbd`` command only flags the image as requiring a resync. The + local cluster's ``rbd-mirror`` daemon process is responsible for performing + the resync asynchronously. + +Mirror Status +============= + +The peer cluster replication status is stored for every primary mirrored image. +This status can be retrieved using the ``mirror image status`` and +``mirror pool status`` commands. + +To request the mirror image status with ``rbd``, specify the +``mirror image status`` command along with the pool and image name:: + + rbd mirror image status {pool-name}/{image-name} + +For example:: + + rbd mirror image status image-pool/image-1 + +To request the mirror pool summary status with ``rbd``, specify the +``mirror pool status`` command along with the pool name:: + + rbd mirror pool status {pool-name} + +For example:: + + rbd mirror pool status image-pool + +.. note:: Adding ``--verbose`` option to the ``mirror pool status`` command will + additionally output status details for every mirroring image in the pool. + +rbd-mirror Daemon +================= + +The two ``rbd-mirror`` daemons are responsible for watching image journals on the +remote, peer cluster and replaying the journal events against the local +cluster. The RBD image journaling feature records all modifications to the +image in the order they occur. This ensures that a crash-consistent mirror of +the remote image is available locally. + +The ``rbd-mirror`` daemon is available within the optional ``rbd-mirror`` +distribution package. + +.. important:: Each ``rbd-mirror`` daemon requires the ability to connect + to both clusters simultaneously. +.. warning:: Pre-Luminous releases: only run a single ``rbd-mirror`` daemon per + Ceph cluster. + +Each ``rbd-mirror`` daemon should use a unique Ceph user ID. To +`create a Ceph user`_, with ``ceph`` specify the ``auth get-or-create`` +command, user name, monitor caps, and OSD caps:: + + ceph auth get-or-create client.rbd-mirror.{unique id} mon 'profile rbd' osd 'profile rbd' + +The ``rbd-mirror`` daemon can be managed by ``systemd`` by specifying the user +ID as the daemon instance:: + + systemctl enable ceph-rbd-mirror@rbd-mirror.{unique id} + +.. _rbd: ../../man/8/rbd +.. _ceph-conf: ../../rados/configuration/ceph-conf/#running-multiple-clusters +.. _explicitly enabled: #enable-image-mirroring +.. _force resync command: #force-image-resync +.. _demote the image: #image-promotion-and-demotion +.. _create a Ceph user: ../../rados/operations/user-management#add-a-user + |