Update stor4nfv install scripts according to opensds aruba release

Since OpenSDS has published its aruba release and also supports
OpenStack scenario, this patch is designed for updating stor4nfv
code to prepare for integrating Compass4NFV and Apex installer on
OpenStack scenario.
Besides the large code changes, some tutorial docs are also added
or updated for better installing this project.

Change-Id: I1e4fec652c6c860028ef39448bc323839f3aa95c
Signed-off-by: leonwang <wanghui71@huawei.com>

12 files changed, 328 insertions, 317 deletions

diff --git a/ci/ansible/group_vars/auth.yml b/ci/ansible/group_vars/auth.yml
new file mode 100644
index 0000000..a85a35a
--- /dev/null
+++ b/ci/ansible/group_vars/auth.yml
@@ -0,0 +1,39 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+---
+# Dummy variable to avoid error because ansible does not recognize the
+# file as a good configuration file when no variable in it.
+dummy:
+
+
+###########
+# GENERAL #
+###########
+
+# OpenSDS authentication strategy, support 'noauth' and 'keystone'.
+opensds_auth_strategy: keystone
+
+# The URL should be replaced with the keystone actual URL
+keystone_os_auth_url: http://127.0.0.1/identity
+
+############
+# KEYSTONE #
+############
+
+# Execute the unstack.sh
+uninstall_keystone: true
+
+# Execute the stack.sh
+cleanup_keystone: true
diff --git a/ci/ansible/group_vars/ceph/all.yml b/ci/ansible/group_vars/ceph/all.yml
index 9594d33..b5f630a 100644
--- a/ci/ansible/group_vars/ceph/all.yml
+++ b/ci/ansible/group_vars/ceph/all.yml
@@ -1,3 +1,17 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#     http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

 ---

 # Variables here are applicable to all host groups NOT roles

 

@@ -9,6 +23,17 @@ dummy:
 

 # You can override vars by using host or group vars

 

+ceph_origin: repository

+ceph_repository: community

+ceph_stable_release: luminous

+public_network: "192.168.3.0/24"

+cluster_network: "{{ public_network }}"

+monitor_interface: eth1

+devices:

+  - '/dev/sda'

+  #- '/dev/sdb'

+osd_scenario: collocated

+

 ###########

 # GENERAL #

 ###########

@@ -125,8 +150,7 @@ dummy:
 #  - repository

 #  - distro

 #  - local

-ceph_origin: repository

-ceph_repository: community

+

 

 #ceph_repository: "{{ 'community' if ceph_stable else 'rhcs' if ceph_rhcs else 'dev' if ceph_dev else 'uca' if ceph_stable_uca else 'custom' if ceph_custom else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1

 #valid_ceph_repository:

@@ -143,7 +167,7 @@ ceph_repository: community
 #

 #ceph_mirror: http://download.ceph.com

 #ceph_stable_key: https://download.ceph.com/keys/release.asc

-ceph_stable_release: luminous

+#ceph_stable_release: dummy

 #ceph_stable_repo: "{{ ceph_mirror }}/debian-{{ ceph_stable_release }}"

 

 #nfs_ganesha_stable: true # use stable repos for nfs-ganesha

@@ -313,8 +337,7 @@ ceph_stable_release: luminous
 # These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).

 # Eg. If you want to specify for each monitor which address the monitor will bind to you can set it in your **inventory host file** by using 'monitor_address' variable.

 # Preference will go to monitor_address if both monitor_address and monitor_interface are defined.

-# To use an IPv6 address, use the monitor_address setting instead (and set ip_version to ipv6)

-monitor_interface: ens3

+#monitor_interface: "{{ ceph_mon_docker_interface if ceph_mon_docker_interface != 'interface' else 'interface' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1

 #monitor_address: 0.0.0.0

 #monitor_address_block: subnet

 # set to either ipv4 or ipv6, whichever your network is using

@@ -323,9 +346,9 @@ monitor_interface: ens3
 

 ## OSD options

 #

-journal_size: 100 # OSD journal size in MB

-public_network: 100.64.128.40/24

-cluster_network: "{{ public_network }}"

+#journal_size: 5120 # OSD journal size in MB

+#public_network: "{{ ceph_mon_docker_subnet if ceph_mon_docker_subnet != '0.0.0.0/0' else '0.0.0.0/0' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1

+#cluster_network: "{{ public_network | regex_replace(' ', '') }}"

 #osd_mkfs_type: xfs

 #osd_mkfs_options_xfs: -f -i size=2048

 #osd_mount_options_xfs: noatime,largeio,inode64,swalloc

@@ -358,11 +381,10 @@ cluster_network: "{{ public_network }}"
 # These variables must be defined at least in all.yml and overrided if needed (inventory host file or group_vars/*.yml).

 # Eg. If you want to specify for each radosgw node which address the radosgw will bind to you can set it in your **inventory host file** by using 'radosgw_address' variable.

 # Preference will go to radosgw_address if both radosgw_address and radosgw_interface are defined.

-# To use an IPv6 address, use the radosgw_address setting instead (and set ip_version to ipv6)

 #radosgw_interface: interface

 #radosgw_address: "{{ '0.0.0.0' if rgw_containerized_deployment else 'address' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1

 #radosgw_address_block: subnet

-#radosgw_keystone: false # activate OpenStack Keystone options full detail here: http://ceph.com/docs/master/radosgw/keystone/

+#radosgw_keystone_ssl: false # activate this when using keystone PKI keys

 # Rados Gateway options

 #email_address: foo@bar.com

 

@@ -475,8 +497,8 @@ cluster_network: "{{ public_network }}"
 #ceph_docker_registry: docker.io

 #ceph_docker_enable_centos_extra_repo: false

 #ceph_docker_on_openstack: false

-#ceph_mon_docker_interface: "{{ monitor_interface }}" # backward compatibility with stable-2.2, will disappear in stable 3.1

-#ceph_mon_docker_subnet: "{{ public_network }}" # backward compatibility with stable-2.2, will disappear in stable 3.1

+#ceph_mon_docker_interface: "interface" # backward compatibility with stable-2.2, will disappear in stable 3.1

+#ceph_mon_docker_subnet: "0.0.0.0/0" # backward compatibility with stable-2.2, will disappear in stable 3.1

 #mon_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1

 #osd_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1

 #mds_containerized_deployment: False # backward compatibility with stable-2.2, will disappear in stable 3.1

@@ -499,3 +521,8 @@ cluster_network: "{{ public_network }}"
 #rolling_update: false

 

 

+#####################

+# Docker pull retry #

+#####################

+#docker_pull_retry: 3

+#docker_pull_timeout: "300s"

diff --git a/ci/ansible/group_vars/ceph/ceph.hosts b/ci/ansible/group_vars/ceph/ceph.hosts
index 34a7b26..ab200a3 100644
--- a/ci/ansible/group_vars/ceph/ceph.hosts
+++ b/ci/ansible/group_vars/ceph/ceph.hosts
@@ -1,3 +1,17 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#     http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

 [mons]

 localhost ansible_connection=local

 

diff --git a/ci/ansible/group_vars/ceph/ceph.yaml b/ci/ansible/group_vars/ceph/ceph.yaml
index 5e70724..68b87b6 100644
--- a/ci/ansible/group_vars/ceph/ceph.yaml
+++ b/ci/ansible/group_vars/ceph/ceph.yaml
@@ -1,8 +1,30 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#     http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

 configFile: /etc/ceph/ceph.conf

 pool:

-  "rbd": # change pool name same to ceph pool, but don't change it if you choose lvm backend

-    diskType: SSD

-    AZ: default

-    accessProtocol: rbd

-    thinProvisioned: true

-    compressed: false

+  rbd: # change pool name same to ceph pool, but don't change it if you choose lvm backend

+    storageType: block

+    availabilityZone: default

+    extras:

+      dataStorage:

+        provisioningPolicy: Thin

+        isSpaceEfficient: true

+      ioConnectivity:

+        accessProtocol: rbd

+        maxIOPS: 6000000

+        maxBWS: 500

+      advanced:

+        diskType: SSD

+        latency: 5ms

diff --git a/ci/ansible/group_vars/ceph/osds.yml b/ci/ansible/group_vars/ceph/osds.yml
deleted file mode 100644
index 57cf581..0000000
--- a/ci/ansible/group_vars/ceph/osds.yml
+++ /dev/null
@@ -1,259 +0,0 @@
----

-# Variables here are applicable to all host groups NOT roles

-

-# This sample file generated by generate_group_vars_sample.sh

-

-# Dummy variable to avoid error because ansible does not recognize the

-# file as a good configuration file when no variable in it.

-dummy:

-

-# You can override default vars defined in defaults/main.yml here,

-# but I would advice to use host or group vars instead

-

-#raw_journal_devices: "{{ dedicated_devices }}" # backward compatibility with stable-2.2, will disappear in stable 3.1

-#journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1

-#raw_multi_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1

-#dmcrytpt_journal_collocation: False # backward compatibility with stable-2.2, will disappear in stable 3.1

-#dmcrypt_dedicated_journal: False # backward compatibility with stable-2.2, will disappear in stable 3.1

-

-

-###########

-# GENERAL #

-###########

-

-# Even though OSD nodes should not have the admin key

-# at their disposal, some people might want to have it

-# distributed on OSD nodes. Setting 'copy_admin_key' to 'true'

-# will copy the admin key to the /etc/ceph/ directory

-#copy_admin_key: false

-

-

-####################

-# OSD CRUSH LOCATION

-####################

-

-# /!\

-#

-# BE EXTREMELY CAREFUL WITH THIS OPTION

-# DO NOT USE IT UNLESS YOU KNOW WHAT YOU ARE DOING

-#

-# /!\

-#

-# It is probably best to keep this option to 'false' as the default

-# suggests it. This option should only be used while doing some complex

-# CRUSH map. It allows you to force a specific location for a set of OSDs.

-#

-# The following options will build a ceph.conf with OSD sections

-# Example:

-# [osd.X]

-# osd crush location = "root=location"

-#

-# This works with your inventory file

-# To match the following 'osd_crush_location' option the inventory must look like:

-#

-# [osds]

-# osd0 ceph_crush_root=foo ceph_crush_rack=bar

-

-#crush_location: false

-#osd_crush_location: "\"root={{ ceph_crush_root }} rack={{ ceph_crush_rack }} host={{ ansible_hostname }}\""

-

-

-##############

-# CEPH OPTIONS

-##############

-

-# Devices to be used as OSDs

-# You can pre-provision disks that are not present yet.

-# Ansible will just skip them. Newly added disk will be

-# automatically configured during the next run.

-#

-

-

-# Declare devices to be used as OSDs

-# All scenario(except 3rd) inherit from the following device declaration

-

-devices:

-#  - /dev/sda

-#  - /dev/sdc

-#  - /dev/sdd

-#  - /dev/sde

-

-#devices: []

-

-

-#'osd_auto_discovery'  mode prevents you from filling out the 'devices' variable above.

-#  You can use this option with First and Forth and Fifth OSDS scenario.

-# Device discovery is based on the Ansible fact 'ansible_devices'

-# which reports all the devices on a system. If chosen all the disks

-# found will be passed to ceph-disk. You should not be worried on using

-# this option since ceph-disk has a built-in check which looks for empty devices.

-# Thus devices with existing partition tables will not be used.

-#

-#osd_auto_discovery: false

-

-# Encrypt your OSD device using dmcrypt

-# If set to True, no matter which osd_objecstore and osd_scenario you use the data will be encrypted

-#dmcrypt: "{{ True if dmcrytpt_journal_collocation or dmcrypt_dedicated_journal else False }}" # backward compatibility with stable-2.2, will disappear in stable 3.1

-

-

-# I. First scenario: collocated

-#

-# To enable this scenario do: osd_scenario: collocated

-#

-#

-# If osd_objectstore: filestore is enabled both 'ceph data' and 'ceph journal' partitions

-# will be stored on the same device.

-#

-# If osd_objectstore: bluestore is enabled 'ceph data', 'ceph block', 'ceph block.db', 'ceph block.wal' will be stored

-# on the same device. The device will get 2 partitions:

-# - One for 'data', called 'ceph data'

-# - One for 'ceph block', 'ceph block.db', 'ceph block.wal' called 'ceph block'

-#

-# Example of what you will get:

-# [root@ceph-osd0 ~]# blkid /dev/sda*

-# /dev/sda: PTTYPE="gpt"

-# /dev/sda1: UUID="9c43e346-dd6e-431f-92d8-cbed4ccb25f6" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="749c71c9-ed8f-4930-82a7-a48a3bcdb1c7"

-# /dev/sda2: PARTLABEL="ceph block" PARTUUID="e6ca3e1d-4702-4569-abfa-e285de328e9d"

-#

-

-#osd_scenario: "{{ 'collocated' if journal_collocation or dmcrytpt_journal_collocation else 'non-collocated' if raw_multi_journal or dmcrypt_dedicated_journal else 'dummy' }}" # backward compatibility with stable-2.2, will disappear in stable 3.1

-#valid_osd_scenarios:

-#  - collocated

-#  - non-collocated

-#  - lvm

-osd_scenario: collocated

-

-# II.  Second scenario: non-collocated

-#

-# To enable this scenario do: osd_scenario: non-collocated

-#

-# If osd_objectstore: filestore is enabled 'ceph data' and 'ceph journal' partitions

-# will be stored on different devices:

-# - 'ceph data' will be stored on the device listed in 'devices'

-# - 'ceph journal' will be stored on the device listed in 'dedicated_devices'

-#

-# Let's take an example, imagine 'devices' was declared like this:

-#

-# devices:

-#   - /dev/sda

-#   - /dev/sdb

-#   - /dev/sdc

-#   - /dev/sdd

-#

-# And 'dedicated_devices' was declared like this:

-#

-# dedicated_devices:

-#   - /dev/sdf

-#   - /dev/sdf

-#   - /dev/sdg

-#   - /dev/sdg

-#

-# This will result in the following mapping:

-# - /dev/sda will have /dev/sdf1 as journal

-# - /dev/sdb will have /dev/sdf2 as a journal

-# - /dev/sdc will have /dev/sdg1 as a journal

-# - /dev/sdd will have /dev/sdg2 as a journal

-#

-#

-# If osd_objectstore: bluestore is enabled, both 'ceph block.db' and 'ceph block.wal' partitions will be stored

-# on a dedicated device.

-#

-# So the following will happen:

-# - The devices listed in 'devices' will get 2 partitions, one for 'block' and one for 'data'.

-# 'data' is only 100MB big and do not store any of your data, it's just a bunch of Ceph metadata.

-# 'block' will store all your actual data.

-# - The devices in 'dedicated_devices' will get 1 partition for RocksDB DB, called 'block.db'

-#  and one for RocksDB WAL, called 'block.wal'

-#

-# By default dedicated_devices will represent block.db

-#

-# Example of what you will get:

-# [root@ceph-osd0 ~]# blkid /dev/sd*

-# /dev/sda: PTTYPE="gpt"

-# /dev/sda1: UUID="c6821801-2f21-4980-add0-b7fc8bd424d5" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="f2cc6fa8-5b41-4428-8d3f-6187453464d0"

-# /dev/sda2: PARTLABEL="ceph block" PARTUUID="ea454807-983a-4cf2-899e-b2680643bc1c"

-# /dev/sdb: PTTYPE="gpt"

-# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="af5b2d74-4c08-42cf-be57-7248c739e217"

-# /dev/sdb2: PARTLABEL="ceph block.wal" PARTUUID="af3f8327-9aa9-4c2b-a497-cf0fe96d126a"

-#dedicated_devices: []

-

-

-# More device granularity for Bluestore

-#

-# ONLY if osd_objectstore: bluestore is enabled.

-#

-# By default, if 'bluestore_wal_devices' is empty, it will get the content of 'dedicated_devices'.

-# If set, then you will have a dedicated partition on a specific device for block.wal.

-#

-# Example of what you will get:

-# [root@ceph-osd0 ~]# blkid /dev/sd*

-# /dev/sda: PTTYPE="gpt"

-# /dev/sda1: UUID="39241ae9-d119-4335-96b3-0898da8f45ce" TYPE="xfs" PARTLABEL="ceph data" PARTUUID="961e7313-bdb7-49e7-9ae7-077d65c4c669"

-# /dev/sda2: PARTLABEL="ceph block" PARTUUID="bff8e54e-b780-4ece-aa16-3b2f2b8eb699"

-# /dev/sdb: PTTYPE="gpt"

-# /dev/sdb1: PARTLABEL="ceph block.db" PARTUUID="0734f6b6-cc94-49e9-93de-ba7e1d5b79e3"

-# /dev/sdc: PTTYPE="gpt"

-# /dev/sdc1: PARTLABEL="ceph block.wal" PARTUUID="824b84ba-6777-4272-bbbd-bfe2a25cecf3"

-#bluestore_wal_devices: "{{ dedicated_devices }}"

-

-# III. Use ceph-volume to create OSDs from logical volumes.

-# Use 'osd_scenario: lvm' to enable this scenario. Currently we only support dedicated journals

-# when using lvm, not collocated journals.

-# lvm_volumes is a list of dictionaries. Each dictionary must contain a data, journal and vg_name

-# key. Any logical volume or logical group used must be a name and not a path.

-# data must be a logical volume

-# journal can be either a lv, device or partition. You can not use the same journal for many data lvs.

-# data_vg must be the volume group name of the data lv

-# journal_vg is optional and must be the volume group name of the journal lv, if applicable

-# For example:

-# lvm_volumes:

-#   - data: data-lv1

-#     data_vg: vg1

-#     journal: journal-lv1

-#     journal_vg: vg2

-#   - data: data-lv2

-#     journal: /dev/sda

-#     data_vg: vg1

-#   - data: data-lv3

-#     journal: /dev/sdb1

-#     data_vg: vg2

-#lvm_volumes: []

-

-

-##########

-# DOCKER #

-##########

-

-#ceph_config_keys: [] # DON'T TOUCH ME

-

-# Resource limitation

-# For the whole list of limits you can apply see: docs.docker.com/engine/admin/resource_constraints

-# Default values are based from: https://access.redhat.com/documentation/en-us/red_hat_ceph_storage/2/html/red_hat_ceph_storage_hardware_guide/minimum_recommendations

-# These options can be passed using the 'ceph_osd_docker_extra_env' variable.

-#ceph_osd_docker_memory_limit: 1g

-#ceph_osd_docker_cpu_limit: 1

-

-# PREPARE DEVICE

-#

-# WARNING /!\ DMCRYPT scenario ONLY works with Docker version 1.12.5 and above

-#

-#ceph_osd_docker_devices: "{{ devices }}"

-#ceph_osd_docker_prepare_env: -e OSD_JOURNAL_SIZE={{ journal_size }}

-

-# ACTIVATE DEVICE

-#

-#ceph_osd_docker_extra_env:

-#ceph_osd_docker_run_script_path: "/usr/share" # script called by systemd to run the docker command

-

-

-###########

-# SYSTEMD #

-###########

-

-# ceph_osd_systemd_overrides will override the systemd settings

-# for the ceph-osd services.

-# For example,to set "PrivateDevices=false" you can specify:

-#ceph_osd_systemd_overrides:

-#  Service:

-#    PrivateDevices: False

-

diff --git a/ci/ansible/group_vars/cinder/cinder.yaml b/ci/ansible/group_vars/cinder/cinder.yaml
index e7971d0..ec2d5b1 100644
--- a/ci/ansible/group_vars/cinder/cinder.yaml
+++ b/ci/ansible/group_vars/cinder/cinder.yaml
@@ -1,3 +1,17 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#     http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

 authOptions:

   noAuth: true

   endpoint: "http://127.0.0.1/identity"

@@ -10,8 +24,16 @@ authOptions:
   tenantName: "myproject"

 pool:

   "cinder-lvm@lvm#lvm":

-    AZ: nova

-    thin: true

-    accessProtocol: iscsi

-    thinProvisioned: true

-    compressed: true

+    storageType: block

+    availabilityZone: default

+    extras:

+      dataStorage:

+        provisioningPolicy: Thin

+        isSpaceEfficient: false

+      ioConnectivity:

+        accessProtocol: iscsi

+        maxIOPS: 7000000

+        maxBWS: 600

+      advanced:

+        diskType: SSD

+        latency: 3ms

diff --git a/ci/ansible/group_vars/common.yml b/ci/ansible/group_vars/common.yml
index cbdaaf6..50749e6 100644
--- a/ci/ansible/group_vars/common.yml
+++ b/ci/ansible/group_vars/common.yml
@@ -1,3 +1,17 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#     http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

 ---

 # Dummy variable to avoid error because ansible does not recognize the

 # file as a good configuration file when no variable in it.

@@ -8,32 +22,63 @@ dummy:
 # GENERAL #

 ###########

 

-opensds_release: v0.1.4 # The version should be at least v0.1.4.

-nbp_release: v0.1.0 # The version should be at least v0.1.0.

-

-# These fields are not suggested to be modified

-opensds_download_url: https://github.com/opensds/opensds/releases/download/{{ opensds_release }}/opensds-{{ opensds_release }}-linux-amd64.tar.gz

-opensds_tarball_url: /opt/opensds-{{ opensds_release }}-linux-amd64.tar.gz

-opensds_dir: /opt/opensds-{{ opensds_release }}-linux-amd64

-nbp_download_url: https://github.com/opensds/nbp/releases/download/{{ nbp_release }}/opensds-k8s-{{ nbp_release }}-linux-amd64.tar.gz

-nbp_tarball_url: /opt/opensds-k8s-{{ nbp_release }}-linux-amd64.tar.gz

-nbp_dir: /opt/opensds-k8s-{{ nbp_release }}-linux-amd64

+# This field indicates which way user prefers to install, currently support

+# 'repository', 'release' and 'container'

+install_from: repository

 

+# These fields are NOT suggested to be modifie

+opensds_work_dir: /opt/opensds-linux-amd64

+nbp_work_dir: /opt/opensds-k8s-linux-amd64

 opensds_config_dir: /etc/opensds

+opensds_driver_config_dir: "{{ opensds_config_dir }}/driver"

 opensds_log_dir: /var/log/opensds

 

 

+##############

+# REPOSITORY #

+##############

+

+# If user specifies intalling from repository, then he can choose the specific

+# repository branch

+opensds_repo_branch: master

+nbp_repo_branch: master

+

+# These fields are NOT suggested to be modified

+opensds_remote_url: https://github.com/opensds/opensds.git

+nbp_remote_url: https://github.com/opensds/nbp.git

+

+

 ###########

-# PLUGIN  #

+# RELEASE #

 ###########

 

-nbp_plugin_type: standalone # standalone is the default integration way, but you can change it to 'csi', 'flexvolume'

+# If user specifies intalling from release,then he can choose the specific version

+opensds_release: v0.2.0 # The version should be at least v0.2.0

+nbp_release: v0.2.0 # The version should be at least v0.2.0

 

-flexvolume_plugin_dir: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/opensds.io~opensds

+# These fields are NOT suggested to be modified

+opensds_download_url: https://github.com/opensds/opensds/releases/download/{{ opensds_release }}/opensds-{{ opensds_release }}-linux-amd64.tar.gz

+opensds_tarball_dir: /tmp/opensds-{{ opensds_release }}-linux-amd64

+nbp_download_url: https://github.com/opensds/nbp/releases/download/{{ nbp_release }}/opensds-k8s-{{ nbp_release }}-linux-amd64.tar.gz

+nbp_tarball_dir: /tmp/opensds-k8s-{{ nbp_release }}-linux-amd64

+

+

+#############

+# CONTAINER #

+#############

+

+container_enabled: false

 

 

 ###########

-#CONTAINER#

+# PLUGIN  #

 ###########

 

-container_enabled: false

+# 'hotpot_only' is the default integration way, but you can change it to 'csi'

+# or 'flexvolume'

+nbp_plugin_type: hotpot_only

+# The IP (127.0.0.1) should be replaced with the opensds actual endpoint IP

+opensds_endpoint: http://127.0.0.1:50040

+

+# These fields are NOT suggested to be modified

+flexvolume_plugin_dir: /usr/libexec/kubernetes/kubelet-plugins/volume/exec/opensds.io~opensds

diff --git a/ci/ansible/group_vars/dashboard.yml b/ci/ansible/group_vars/dashboard.yml
new file mode 100644
index 0000000..b9ac8c4
--- /dev/null
+++ b/ci/ansible/group_vars/dashboard.yml
@@ -0,0 +1,33 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+---
+# Dummy variable to avoid error because ansible does not recognize the
+# file as a good configuration file when no variable in it.
+dummy:
+
+
+###########
+# GENERAL #
+###########
+
+# Dashboard installation types are: 'container', 'source_code'
+dashboard_installation_type: container
+
+
+###########
+# DOCKER  #
+###########
+
+dashboard_docker_image: opensdsio/dashboard:latest
diff --git a/ci/ansible/group_vars/lvm/lvm.yaml b/ci/ansible/group_vars/lvm/lvm.yaml
index a360891..89c77b6 100644
--- a/ci/ansible/group_vars/lvm/lvm.yaml
+++ b/ci/ansible/group_vars/lvm/lvm.yaml
@@ -1,8 +1,31 @@
-tgtBindIp: 127.0.0.1

+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#     http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

+tgtBindIp: 127.0.0.1 # change tgtBindIp to your real host ip, run 'ifconfig' to check

+tgtConfDir: /etc/tgt/conf.d

 pool:

-  "vg001": # change pool name same to vg_name, but don't change it if you choose ceph backend

-    diskType: SSD

-    AZ: default

-    accessProtocol: iscsi

-    thinProvisioned: false

-    compressed: false

+  opensds-volumes: # change pool name same to vg_name, but don't change it if you choose ceph backend

+    storageType: block

+    availabilityZone: default

+    extras:

+      dataStorage:

+        provisioningPolicy: Thin

+        isSpaceEfficient: false

+      ioConnectivity:

+        accessProtocol: iscsi

+        maxIOPS: 7000000

+        maxBWS: 600

+      advanced:

+        diskType: SSD

+        latency: 5ms

diff --git a/ci/ansible/group_vars/osdsdb.yml b/ci/ansible/group_vars/osdsdb.yml
index 1b6b812..1ad176e 100644
--- a/ci/ansible/group_vars/osdsdb.yml
+++ b/ci/ansible/group_vars/osdsdb.yml
@@ -1,3 +1,17 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#     http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

 ---

 # Dummy variable to avoid error because ansible does not recognize the

 # file as a good configuration file when no variable in it.

@@ -9,8 +23,7 @@ dummy:
 ###########

 

 db_driver: etcd

-db_endpoint: localhost:2379,localhost:2380

-#db_credential: opensds:password@127.0.0.1:3306/dbname

+db_endpoint: "{{ etcd_host }}:{{ etcd_port }},{{ etcd_host }}:{{ etcd_peer_port }}"

 

 

 ###########

@@ -22,7 +35,7 @@ etcd_host: 127.0.0.1
 etcd_port: 2379

 etcd_peer_port: 2380

 

-# These fields are not suggested to be modified

+# These fields are NOT suggested to be modified

 etcd_tarball: etcd-{{ etcd_release }}-linux-amd64.tar.gz

 etcd_download_url: https://github.com/coreos/etcd/releases/download/{{ etcd_release }}/{{ etcd_tarball }}

 etcd_dir: /opt/etcd-{{ etcd_release }}-linux-amd64

diff --git a/ci/ansible/group_vars/osdsdock.yml b/ci/ansible/group_vars/osdsdock.yml
index 1544c65..c0f54f0 100644
--- a/ci/ansible/group_vars/osdsdock.yml
+++ b/ci/ansible/group_vars/osdsdock.yml
@@ -1,3 +1,17 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#     http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

 ---

 # Dummy variable to avoid error because ansible does not recognize the

 # file as a good configuration file when no variable in it.

@@ -10,25 +24,28 @@ dummy:
 

 # Change it according to your backend, currently support 'lvm', 'ceph', 'cinder'

 enabled_backend: lvm

+# Change it according to your node type (host or target), currently support

+# 'provisioner', 'attacher'

+dock_type: provisioner

 

 # These fields are NOT suggested to be modified

 dock_endpoint: localhost:50050

 dock_log_file: "{{ opensds_log_dir }}/osdsdock.log"

 

+

 ###########

 #   LVM   #

 ###########

 

-pv_devices: # Specify block devices and ensure them existed if you choose lvm

-  #- /dev/sdc

-  #- /dev/sdd

-vg_name: vg001 # Specify a name randomly

 

 # These fields are NOT suggested to be modified

 lvm_name: lvm backend

 lvm_description: This is a lvm backend service

 lvm_driver_name: lvm

-lvm_config_path: "{{ opensds_config_dir }}/driver/lvm.yaml"

+lvm_config_path: "{{ opensds_driver_config_dir }}/lvm.yaml"

+opensds_volume_group: opensds-volumes

+

+

 

 ###########

 #  CEPH   #

@@ -43,7 +60,8 @@ ceph_pools: # Specify pool name randomly
 ceph_name: ceph backend

 ceph_description: This is a ceph backend service

 ceph_driver_name: ceph

-ceph_config_path: "{{ opensds_config_dir }}/driver/ceph.yaml"

+ceph_config_path: "{{ opensds_driver_config_dir }}/ceph.yaml"

+

 

 ###########

 # CINDER  #

@@ -65,14 +83,14 @@ cinder_image_tag: debian-cinder
 # removed when use ansible script clean environment.

 cinder_volume_group: cinder-volumes

 # All source code and volume group file will be placed in the cinder_data_dir:

-cinder_data_dir: "{{ workplace }}/cinder_data_dir"

-

+cinder_data_dir: "/opt/cinder_data_dir"

 

-# These fields are not suggested to be modified

+# These fields are NOT suggested to be modified

 cinder_name: cinder backend

 cinder_description: This is a cinder backend service

 cinder_driver_name: cinder

-cinder_config_path: "{{ opensds_config_dir }}/driver/cinder.yaml"

+cinder_config_path: "{{ opensds_driver_config_dir }}/cinder.yaml"

+

 

 ###########

 # DOCKER  #

diff --git a/ci/ansible/group_vars/osdslet.yml b/ci/ansible/group_vars/osdslet.yml
index a872449..32c12fe 100644
--- a/ci/ansible/group_vars/osdslet.yml
+++ b/ci/ansible/group_vars/osdslet.yml
@@ -1,3 +1,17 @@
+# Copyright (c) 2018 Huawei Technologies Co., Ltd. All Rights Reserved.

+#

+# Licensed under the Apache License, Version 2.0 (the "License");

+# you may not use this file except in compliance with the License.

+# You may obtain a copy of the License at

+#

+#     http://www.apache.org/licenses/LICENSE-2.0

+#

+# Unless required by applicable law or agreed to in writing, software

+# distributed under the License is distributed on an "AS IS" BASIS,

+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+# See the License for the specific language governing permissions and

+# limitations under the License.

+

 ---

 # Dummy variable to avoid error because ansible does not recognize the

 # file as a good configuration file when no variable in it.