Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
Packets dropped by QoS (because queues were full) were erroneously
shown as idle cycles. There aee now shown as discarded packets.
Change-Id: I01a619de621a3dfbfe11cabef257f9dec311e208
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Different checks were done when setting the generator pkt_size.
In case of wrong pkt_size (e.g. too big) an error was printed but
the pkt_size was still set causing a potential corruption.
In addition, in case of a packet size incompatible with some
of the packet fields (e.g. latency data) PROX was panicing
while this should not happen runtime for such an error.
Change-Id: Ifa11475bf295aaac7b0255c1bf9b5feed8ef90c4
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
reapply the latest changes (47355 and 47521) due to gerrit merge problem
* fix crypto init for both encryptor and decryptor
* improve performance: preallocate crypto op memory in init
* finalize enabling routed ipsec traffic (proper IP/MAC addresses)
* correct handling of dropped packets at encryptor
* Fix receive packets with size > 1024 bytes
Change-Id: I51cccc9bef0b9564ea1a3465ad28fb985eee06d1
Signed-off-by: Igor Shaula <igor.shaula@intel.com>
|
|
Change-Id: I4ea54763871c18b1bd6cec9dbb926f18f0f5833f
Signed-off-by: Igor Shaula <igor.shaula@intel.com>
|
|
|
|
* fix traffic routing
* enqueue packets in a bulk (improve crypto performance: TBD)
* improve code clarity
* fix crypto dequeuing
* complete decryption path implementation
* NOTE: the code works in a chain mode; crypto init to be fixed next
Change-Id: I058a906f4f4f5691ebf25d2cdf5b5faded88e11d
Signed-off-by: Igor Shaula <igor.shaula@intel.com>
|
|
The l3 submode was not supported in nop mode, as the nop mode uses some
specific nop thread (and not generic). When L3 is specified, the nop mode
must use the generic thread. In addition the l3 submode is implemented
differently than other submodes. It is not supported through task_init
structures (i.e. each task does not have to explicitely tell that it
supports l3 submode). But this prevented to run both a nop with no submode
and a nop with a l3 submode. Note that nop with l3 is usually not very useful
- it handles arp (requests and response) but as nop, it does not swap IP
addresses. So with a real switch, the packets transmitted will be received
back... and l3 mode is usually mainly usefull when using a switch.
However, there is at least one nop mode where l3 submode makes sense:
when the nop does not transmit. In such cases, for instace used in
conjunction with a gen l3, the nop receives all packets and forward
the arp requests and responses to the master for handling.
Change-Id: I992121db285ba25a11cbb494092a6afc6fe55a58
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: I8cbad85c607ca5148723ed3689eaed2c4967fb1d
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
|
|
Change-Id: I9c46b57f98b566efc8ca3ea5966befe2a150315b
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: I7797241a1d384fa184bdf4d73b81babb21f7383d
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
|
|
|
|
In lwAFTR (ipv6 de-encapsulate) the generated ipv4 packet requires an IP
checksum, otherwise this packet is dropped in Openstack. (Openstack is
much stricter than baremetal) Some fields in the header need to be
initialized.
Add flag in Makefile which when enabled will build to include the generate
the IP checksum in the build. FLAG = GEN_DECAP_IPV6_TO_IPV4_CKSUM=y
Not include in default build.
Change-Id: If94e7cff64b03c66362021f05e48fb9265fc8210
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
- Adjust handle functions to PROX-v035+ prototype, returning 0 when all
packets have been handled.
- Because cryptodev API was modified in DPDK 17.08, many changes would
be necessary to support it. For the moment, just exclude handle_esp.c
from PROX build when using DPDK 17.08+, which will be supported later.
- Cleanup:
- consistent use of PROX_PANIC to cleanly fail on errors
- consistent use of OUT_DISCARD to drop unhandled packets
- remove "__attribute__((unused))" when parameter is actually used
- remove unused defines, fields and variables
Change-Id: I10d84fa184a866b4a5f87272875612aace5dd5b1
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
Change-Id: Ie6d4e7ce22c27967117a446626f5923643397812
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
Change-Id: I389389e5317d1a9d0d79cc1762d6f15d8287e36a
Signed-off-by: Alexander Komarov <alexander.komarov@intel.com>
Signed-off-by: Alexander Komarov <izard.ak@gmail.com>
|
|
Change-Id: I25ab50297cd7d2f80a5206ddc3c55ffad36bd8d8
Signed-off-by: Alexander Komarov <alexander.komarov@intel.com>
Signed-off-by: Alexander Komarov <izard.ak@gmail.com>
|
|
Change-Id: If7cc44f3b57a54aef510f729930e6f79bf83689e
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Change-Id: I6b78044beb21fdf07ad70d22c81bcca6ca955e63
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Change-Id: I366d915a05f58c5653de89c1c59ebd180904e080
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
JIRA: SAMPLEVNF-85
The ethernet header pointer initialization was wrong due to which
the MAC address were not updated. Hence the packets were not
reaching the destination.
Change-Id: I90a38bba8d26d5f481c6476e6995eed92970b6e3
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
|
|
JIRA: SAMPLEVNF-83
This patch fixes the klocwork reported issues
Change-Id: I190d024777be1bf53cdc97feca1e5934781f3582
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
|
|
Change-Id: I37ef70ae324e258da16b7bd67baf0e939d88b3ec
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Change-Id: I58d4a1b6c47fa204a8af67c725b22f797ec19755
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
JIRA: SAMPLEVNF-78
This patch implements rest api's for VNF clients. This
comprises of
* vnf api's for common functionality
* vnf api's for CGNAPT
* vnf api's for VFW
Change-Id: I56d22c64bf3ee5b0a2e536da8169ac7583499041
Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>
|
|
JIRA: SAMPLEVNF-70
Integrating gateway packet forwarding to UDP_Replay VNF.
Change-Id: I00f2bc498563b81260c2c98275f7a73dbc2cb445
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
|
|
JIRA: SAMPLEVNF-61
Integrating gateway packet forwarding to CGNAT VNF.
Change-Id: Ifd528b40134da2d12644a406b2da05a5f044aa1c
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
|
|
JIRA: SAMPLEVNF-60
vACL changes to support gateway packet forwarding.
Change-Id: I1435254e4f18bc26bf2b37be2e3ed2df0fb29153
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
|
|
JIRA: SAMPLEVNF-59
Changes to support gateway packet forwarding to vFW.
Change-Id: Ie9164b092f6864cfcdb02e7b325c4e8796a7e422
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
|
|
Change-Id: Id9c22f92955b64242971ff768a64132451c8350e
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
The split of the scripts is documented in the README file. The VM also
runs now devbind.sh with the proper MAC address to bind the dataplane
interface with the DPDK poll mode driver.
Change-Id: I3e7a6235379dc80530934376c7799ac3396b5325
Luc Provoost <luc.provoost@intel.com>
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Change-Id: I65e8b2d1cea2a1edfa738671e460b6a0170d3363
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Currently packets generated with IP addresses 10.1.1.x when handled
by 5 Tuple Load Balancer are discarded/dropped. These addresses are
outhside the range of the hash algorithm.
Change-Id: Idf2cea0ff299a3fa75554f0d103e13391eae02fa
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
|
|
JIRA: SAMPLEVNF-76
Change-Id: Iab363cc6cd5310e25c15758f02ca68751e81a49c
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
JIRA: SAMPLEVNF-75
Change-Id: Iac091ca0f12570d47d36366055ad89737b386c36
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
JIRA: SAMPLEVNF-75
Change-Id: Icb8e46ee4566cc637b299913b1d0a7d5baafd3ac
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
JIRA: SAMPLEVNF-72
Change-Id: Iadb3173c76306a48860313177f1b86e8410c7df3
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
JIRA: SAMPLEVNF-71
Change-Id: Ibcd70008e1657eaa0b2f95aac319483490c290aa
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
JIRA: SAMPLEVNF-68
Updating the vFW Config and scripts with following:
1. Remove arp/nd route tbl from cfg files
2. Adding routeadd command to script file as route_tbl is
removed from cfg files
3. Remove ports_mac_list as the l2l3 stack will initialize
4. Merge IPv4 and IPv6 cfg/tc files to reduce the number files
5. Remove 1 WT cfg files to reduce too many cfg files.
Change-Id: If16ee740cd464f2cf55b8d11f590471aba9c7f30
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
|
|
JIRA: SAMPLEVNF-64
fdir conf mode was incorrectly set to RTE_FDIR_MODE_PERFECT
in SWLB and also RTE_FDIR_MODE_NONE in HWLB.
This patches corrects them to enable the Vector PMD.
Change-Id: I2097479c948ad482dbb868e315e4a6dfc8355ef2
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
|
|
|
|
|
|
JIRA: SAMPLEVNF-32
This patch implements
~New nd state machine implementing new states
like INCOMPLETE, COMPLETE, PROBE, STALE.
~Implementing nd buffering, when nd is unresolved.
~Integratig the new changes with vCGNAPT
~Integrating the new changes with vACL
~Integrating the new changes with vFW.
~Adding locks to synchronize against multiple VNF threads
Change-Id: Iaee4f4599ca3016ebb50ee2d9133fd8c39c5cd04
Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>
|
|
|
|
removes the nb_lcores as its no longer used.
Change-Id: I13020585afb6d1e0758f1efc6578740dd3502d72
Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>
|
|
JIRA: SAMPLEVNF-55
PROX is a DPDK-based application implementing Telco use-cases such as
a simplified BRAS/BNG, light-weight AFTR... It also allows configuring
finer grained network functions like QoS, Routing, load-balancing...
(We are moving PROX version v039 to sampleVNF
https://01.org/intel-data-plane-performance-demonstrators/prox-overview)
Change-Id: Ia3cb02cf0e49ac5596e922c197ff7e010293d033
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
JIRA: SAMPLEVNF-54
The default traffic_type value needs to be set to IPv4 instead of
MIX type which is not supported.
Change-Id: Ibe8ec31bc7a435fd97aaae0e9e664d0eb70ee30c
Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
|
|
THis patch modifies the Makefile to comprehend the
dynamic arp support
Change-Id: I92f03554b387c883840449014acf1a08b774b8fa
Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com>
|