| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit adds support for the creation of tap devices.
To create a tap device, and associate it with a DPDK port,
add within the port section:
vdev=<tap_name>
local ipv4=<ip_assigned_to_port>
<tap_name> will appear as a kernel network device, with an IP <ip_assigned_to_port>
ARP packets received from the network on the DPDK interface will be forwarded to the kernel.
1st packet which needs to be generated to a new IP will cause an IP packet
to be sent to the kernel (using socket sendto) forcing the kernel to send an ARP_REQUEST.
In this commit, there is no notification from the kernel about ARP table changes.
This is subject to further commits.
Two config files, gen_tap.cfg and swap_tap.cfg have been created. They work one against each other.
*** Note however that they do not work if running within the same host
(with the port being connected back to back) ***
This is due to the fact that the kernel would bypass the ports and use local interface...
Change-Id: Iadeec0d99e3c693472ea44bdb9163a3bf97df2fa
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Since runrapid.py is now supporting more than 1 dataplane interface, we
need to use a port index in the rapid.env file for the dataplane ports.
In k8sdeployment.py, we only support 1 dataplane port, but we are
writing dp_ip1 and dp_mac1 in the environment file. The copyright dates
are also updated. Some references to VM have also been changed to instance.
Change-Id: Ie1d036c13ef5d6f0aa1f35aa068a9760a1cfc2a9
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
IPV6 test has been added. The generator will now generate IPV6 packets
using NDP to resolve MAC addresses. The hex IP addresses in the inline
definition of the packets in the cfg files is now calculated by a lua
function called in parameters.lua. The hard-coded path /home/centos has
been replaced by ~. An error in the speed calculations has been fixed.
See the RapidTest class for details. The actual number of generated
flows is now reported. If the requested number of flows is not a power
of 2, the lowest power of 2 that is larger than the requested number of
flows will be used and reported.
Change-Id: I36b8d345b4a03c2cf358c19ec353ca8ad2831293
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
All packet size in the *.test files have been replaces with imix sizes.
imix is now a list of packet sizes. If you want to run with only a
pakcet size of 64, you need to specify a list containing only 1 size:
[64].
You can also specify multiple imix values by specifying a list of list
of sizes. The keyworkds in the test files are now imix & imixs.
Change-Id: Iea47c0266b022133b7bbfc9a6811e3199ae41521
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
yaml files have been added to the repo as an example. Please check the
README explaining the output section reqs for this yaml file. There is
also a new file (config_file): it also specifies which yaml files to
use. multiple dataplane interfaces per VM can now be specified and will
appear in the <STACK>.env file. An error in setting the packet size has
been fixed (see set_udp_packet_size for packet size setting details)
Change-Id: Ie89a4940521dac7dd3652acca477739abb9f5497
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The code has been rewritten in multiple classes and files for better
readability and maintainability. You should now also use Python3 to run
the scripts. Some of the variables in the config files have moved to
other sections. The pushgateway parameter moved to the [varia] section
of the rapid environment file.
Change-Id: Ic61a1bc3baa39447d42b21dfcc0f16c28fcdfa6e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Change-Id: I9e90c9bdd4d6e83ce0533fd38e1980dca1841bdb
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
dump packets (e.g. dump 1 0 1) was in some cases dumping more
packets than expected.
Proper count of packets is now dumped.
Change-Id: I0974465d617eda00e77ee87148bf96991ecd3ed7
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: I58fa7a0ab7aaa27e9f9383f7995bb71bf0952618
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Variables were initiales based on the file name of the PROX
configuration files. These decisions are now based on the content of
these files and other variables, rather than just the name of a file.
This commit also fixes some bugs: irq test was not executing any more,
some issues with the push gateway reporting.
Change-Id: I39308effad3c80cf52d96e4d85d92d4b5f0be9a5
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
In case of kubernetes based deployments procedure for test environment
creation is different. Please refer to README.k8s file for more
details.
Dockerfile and dockerimage.sh files can be used to create a docker
image with prox.
There is separate createrapidk8s.py script which is used to create
appropriate number of PODs for testing based on the rapid.pods
configuration.
port_info is a helper application to identify port MAC address.
Change-Id: I73611f066ac54260aa11dd17c173379df06f46a5
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
* changes:
New PROX commit ID and bug fix
code review comments and PROX commit ID
Code review feedback & back-ground traffic support
Fix run_iteration when not using the sut_sock
Specify latency bucket size & correct calculation
Initial support for percentile latency measurements
Combine code for fixed rate and variable rate tests
Better Latency accuray warning message
Support for ETSI GS NFV-TST 009
|
|
Updated deploycentos.sh with latest PROX commit ID and took another code
review comment into account.
Change-Id: Iedfa695be7496459d990f36e2dc00c8890b19fb3
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
|
|
Implemented the code review comments I got on previous commits and using
commit ID 2cd03b7 to select the PROX version that will be installed in
the VMs through deploycentostools.sh
Change-Id: Ifc4c18c657a8bd57c68a7fc9d885c75ffdcb7b5d
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Change-Id: I04e0bdc6679a74a8ace26eb30d6f8d2857d6c1c7
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
When PROX detects an error condition at startup, it calls PROX_PANIC
which prints an message before calling rte_panic to end the application.
If ncurses was already started, this results in the message being printed
in ncurses (and prox.log) then leaving ncurses; hence the message is usually
not visible to the user (until it open prox.log), giving the impression of an
unexpected crash.
With this fix, the error message is repeated after closing ncurses, hence the message
will be printed on stdout.
Note that it might also be printed twice on stdout if ncurses was not already started.
As part of this fix, prox.log is now properly closed.
Change-Id: If41875843f1a39bc715f4264b3992c3fa018394e
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
lat all stats <core_id> <task_id> combines "lat stats" and "lat packets" within one command.
This command returns:
- One line in case the core_task parser fails. In that case the line will start with: "error: invalid syntax"
- One set of lines for each core task:
- if core/task is invalid, or not running lat mode, the line will contain (start with) "error...". this will be the only line for that core/task.
- Otherwise the set of lines will be:
- One line as returned by "lat stats". This line will be
- One line starting with "error" in case of error, or
- One line containing lat_min_usec, lat_max_usec, lat_avg_usec, tot_lat_min_usec, tot_lat_max_usec, last_tsc, rte_get_tsc_hz(), lcore_id, task_id
- The return from lat packets i.e.
- One line starting with "error" in case of error, or
- 128 lines - one for each bucket - as returned by "lat packets" command
This command is more useful then lat packets, as it contains the tsc - needed to see whether the sample is new or not.
Change-Id: I04231aa7c5bd2d352ed6f94d40e88d3b411ce744
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
- Latency Distribution (i.e. histograms) has been added when latency is enabled.
- Histograms are now compiled by default.
- A bug has also been fixed, which was causing strange behavior in the histograms
(due to bucket size being overwritten).
- The default bucket size has been changed to "11" which means that the size of each bucket
is now (1 cycle << 11) = 2048 cycles = 1 microsecond at 2GHz. It was (1 << (10 - 1)).
As there are 128 latency buckets, it is not possible to show all of them on the display.
Hence the latency buckets are displayed based on on the assumption that the minimum latency is usually relatively
stable and that the maximum latency change more often.
- The first empty buckets are not shown (i.e. buckets empty for all tasks)
- If more than 15 buckets are non empty, then the buckets are combined, so that a maximum of
15 (bigger) buckets are shown
- If less than 15 buckets are non empty, the following (empty) buckets are shown
(this avoid seeing every x seconds some columns being added and removed).
Change-Id: I27fe6ac0e513a5558e42ff2e74255c55ba79516d
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: I090bf8f1cd5a5d2dfa4f336bc66c46cc03d6c5bb
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
This commit prepares PROX for supporting changes from DPDK 19.08
Mainly, the "sed" listed below were run.
In addition,
- some forward definition have been removed,
- prox_compat.h has been updated
- prox_compat.h has been included where necessary.
Hence such a commit is rather easy to review and to reapply
on other branches if necessary.
sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.h
sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.c
sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.c
sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.h
sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.c
sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.h
sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.c
sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.h
sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.h
sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.c
sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.c
sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.h
sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.c
sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.h
sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.c
sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.h
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.c
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/struct prox_rte_ether_addr_copy/prox_rte_ether_addr_copy/g' *.c
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.c
sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.c
sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.h
sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.c
sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.h
sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.c
sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.c
sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.h
sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.c
sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.h
sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.c
sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.h
sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.c
sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.h
sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.c
sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.h
sed -i 's/TCP_SYN_FLAG/PROX_RTE_TCP_SYN_FLAG/g' *.c
sed -i 's/TCP_RST_FLAG/PROX_RTE_TCP_RST_FLAG/g' *.c
sed -i 's/TCP_FIN_FLAG/PROX_RTE_TCP_FIN_FLAG/g' *.c
sed -i 's/TCP_ACK_FLAG/PROX_RTE_TCP_ACK_FLAG/g' *.c
Change-Id: I4dfe8be68e618c94dcaae28754579fbeb571bb00
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Various code review comments taken into account. We also support now
background traffic, meaning the scripts will start a test between
machines and monitor packet loss, latency, etc., but at the same time,
the script will also start traffic on background machines. That traffic
will not be monitored. Each generator will generate the same ammoung of
traffic.
Change-Id: I5cd495be230a526f91de965f3d4dd0581681f5ca
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
When no sut_sock monitoring the swap, the while loop would never come to
an end. Also added heartbeat timeout in the generator config files.
Change-Id: I3c36991c65b9b826faf3d051a1354ca7eb34c24e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
A new parameter bucket_size_exp in the *.test file specifies the bucket
size for latency measurement. The default is 11 which corresponds to a
bucket size of 1 usec for a 2GHz processor. This fix is also calculating
the bucket size based on the reported frequency. Before it was assuming
a 2GHz processor.
Change-Id: I70d15e90e151a7e474cd05c9ac91b71a11fd5c78
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
We are now reporting a percentile number for the round-trip latency. The
numbers are only correct for processors running at 2GHz. Will fix this
next so it runs for any freqency. We only report 1-127 usec. If the
latency goes higher, we are now reporting "VERY HIGH".
Change-Id: If9fda63cea8616febcc0f24dc52590976cf39f3d
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Previously, there were 2 functions: run_flow_size_test and
run_fixed_rate. The functionality of run_fixed_rate is now added to
run_flow_size_test.
Change-Id: Ifda70b8088b9131cc6c034d8007825e6d0917682
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The lacency accuracy warning is now given only taking into account
packets that were not dropped. Also fixed an error with the value of r
in the run_iteration function
Change-Id: Ic05fd2e4b8c59a4b7bcc131e981c08e0001436a6
Signed-off-by: Luc Provoos <luc.provoost@intel.com>
|
|
New test added TST009_Throughput.test allowing to run the throughput
benchmark as defined in ETSI GS NFV-TST 009. This change adds the binary
search algorithm as defined in the specification document.
Change-Id: I00e81a811a9c42b06136694fc1387bc59e954a28
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Removed the remaining UUIDs from the centos.json file, making it easier
to reuse this file. This does require a recent version of the packer
tool. Updated the README accordingly and also added the --env option in
the packer alias, so that the OS_CLOUD variable is set when running
packer in the container. Updated rapid.vms with the security group name
used in the centos.json file.
Change-Id: I4f6815a3250811e336c14857e0ec5e7793a77acf
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Fixing an error re-introduced in the swap.cfg file. The mempool size
needs to be bigger than the number of rx and tx descriptors (we need
some extra buffers in the mempool for other things than rx and tx
descriptors). The default number of tx and rx descriptors has been
changed in PROX to 2K. This initially went through the testing since
this is just giving a warning in the prox.log file for some PMDs. For
other PMDs, PROX will not start.
Also fixed an inconsistency in rapid.vms: name of the security group.
Change-Id: If95677bd6169a16da1b3b2a56d13936a854c385e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
-Renamed monitorswap.test into corestats.test. This is a more generic
test case that can monitor the core statistics of all PROX instances
-New portstats.test which can monitor the port statistics of all PROX
instances
-Removed the tasks parameter in the [DEFAULT] section of the *.test
files. Runrapid.py is now scaning the PROX configuration files to
automatically detect the PROX tasks that are being used.
-There is now an option to add the PushGateway parameter in the
[Default] section of some *.test files. This will push the measurements
to the Gateway, so they can be used by tools like Grafana. The logging
of the data in a csv file has also been improved. Results can now be
found on the screen, in the RUN*.log files, in the *.csv files and are
being pushed to the PushGateway.
-In the *.test files, replaced the swapcores, irqcores and impaircores
by the cores parameter since they are not treated differently by the
code. For a generator, we are still using the gencores and latcores
parameters since we need to treat them differently in runrapid.py
-devbind.sh is removed from the repository since this file is now
created by runrapid.py
-renamed the rapidVMs.vms file into rapid.vms
-image is now built without ssh access for root. Only using centos user.
runrapid.py is now using centos user for ssh sessions. PROX tools are
strted using sudo
-using new DPDK, mb_lib and PROX versions as defined in
deploycentostools.sh
-installing missing yum-utils package in image
-added flowsize parameter to the impairtest
-added list of flowsizes to the fixed_rate testing (l3framerate.test)
-the irqtest can now loop through multiple Test Machines in stead of
only checking the irq of one. Note that we should have the same cores
parameter for all Test machines
-changes in prox_ctrl.py to support setting the speed of a generator on
a combination of mulitple cores and tasks. Also added the
multi_port_stats function to support the new portstats.test
-Updated version to 19.11.21
-Fixed some power of 2 in the flow table
Change-Id: Ia14543bf3195a2b1bd4184b455da6940f1777fc9
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Change-Id: Ieff72073fff06818a5c5bc8fb9116461c95c2901
Signed-off-by: Illia Polliul <ipolliul@juniper.net>
|
|
Note that since 6073b359 (April 2018) IPsec PROX support requires
at least DPDK 17.11. Hence README has been updated.
Change-Id: I34b7a968c16db5c3a3fc7bb6af111fdb49ad6b91
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: Ic452b22dc2522a1b49e3091cb25f2784bc505b41
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: I7ae7d9f2f5f3058df032062e0b2f6e3207086930
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
|
|
When support for DPDK 18.05 was added it prevented supporting some
much older DPDK such as 16.04. This has been fixed.
Change-Id: Idd7ddd7e485c54c41def0540b8c126c097a05941
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
A high number of RX descriptor can be helpful in avoiding
packet loss due to the core being interrupted.
This commit increases the default number of descriptors from 256 to 2K.
Those values are checked versus the minimum and maximum supported by the pmd.
Number of mbufs (mempool size) have been updated n config files to support this
default number of dsescriptors.
The number of descriptors can still be overwritten by the config file. However
those values must always remain within the limits reported by the pmd.
Change-Id: I5f7999eca886dad68f3c0733da0d796bf4c06a56
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Some OVS versions reports that they support UDP offload and no IPv4 offload,
but fails when UDP offload is enabled.
Hence, now, when virtio reports that it supports UDP checksum and no IPV4
checksum offload, we disable UDP checksum offload.
Change-Id: I4f22f6be4d97b0aedf267ebeaa498c0dacef3317
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
|
|
- When using "pcap file" argument in PROX config file in the gen mode
(and no submode), packets were truncated to 8 bytes (and a warning printed)
This has been fixed.
- "Set value" command was checking whether offset was within first 1518 bytes
unrespective to the mtu (e.g. jumbo packets). This has been fixed.
- There was a limit of 64K packets loaded from a pcap file (which could be
overwritten through PROX config). This limit has been removed - by default
all packets from pcap are loaded
- When pcap was loaded, memory was allocated to store the packet. However
just enough memory was allocated, so that there was no way to change (increase)
packet size through command line after that. Now memory is allocated to store
up to mtu size
- While "set value" command was acting on all packets, "pkt size" command
was only changing the first packet. This has now been changed and both commands
change all the packets.
- A few other minor cleanups.
Change-Id: I7264cee8d57e3e6a405dfd7e7a52a95b99399d99
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
When CRC stripping is enabled (default PROX behavior), the number of
rx bytes received by the NIC returned by DPDK usually does not take the
CRC 4 bytes into account.
However, for i40e virtual functions those 4 bytes are counted as part of
the received bytes. This resulted in both DPDK and PROX taking those 4 bytes
into account causing the RX % to be above 100%.
Change-Id: I59883b638ed67a6778f80c4dd6bfbfc4f9f2f528
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: I7c3e2981692d823c86787b77d61190327d6448e4
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: I833d753bd5c426d50c0c9fdee5668f3b9fff13b9
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Multicast can be enabled through configuration or through command line
- Through configuration
Add multicast=mcast_address (e.g. multicast=01:00:5e:01:02:03) in the port
section
- Through command line
run enable multicast port_id mcast_address (e.g. enable multicast 1 01:00:5e:01:02:03)
IGMP join message is sent unsollicited through command line:
join igmp core_id task_id ip (e.g. join igmp 1 0 224.1.1.3)
To enable swap answering IGMP Query (w/ IGMP Join)
- Through configuration
Add igmp ipv4=ip_address within the core/task section
- Through command line
join igmp core_id task_id ip (e.g. join igmp 1 0 224.1.1.3)
(this will 1st initiate an unsollicated join, then answer any subsequent query)
UDP/TCP packets received on a multicast address (224.0.0.0 => 239.255.255.255) are discarded
To stop sending responses to IGMP query:
leave igmp core_id task_id
Change-Id: I3808ccabf3b38b5a1e10e1b044db63aa05bcd7b5
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
This includes supporting following API changes
- RTE_VER_... now in rte_config.h instead of rte_version.h
- <rte_ethdev.h> now seems required by <rte_eth_ctrl.h>
- rte_sched_port_pkt_write takes extra argument
- rte_sched_port_pkt_read_tree_path takes extra argument
- enum rte_meter_color replaced by rte_color
The extra argument, sched_port, is initialized based on qos_conf parameters.
Modes such as qinq_encap4 uses sched_port when doing classification, but does
not set qos_conf params. It inherits the sched_port from QoS
Change-Id: If8312918241e7d482161a7538f53faac6c303e86
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Some wrong parameters in start (such as "start all 4" while there are only
less than 4 tasks available on some cores) and stop command could
have potentially caused a crash in some cases.
Change-Id: I6dc201575b574c53ded242ea795c35de82fb787e
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
fb0c44a fixed compilation on GCC 8 by using:
1) #pragma GCC diagnostic ignored "-Wstringop-truncation"
2) __attribute__ ((fallthrough));
However, -Wstringop-truncation has only been introduced in GCC 8 and
__attribute__ ((fallthrough)) has only been introduced in GCC 7.
Hence they caused Warnings/Errors on earlier versions.
Comments about fallthough (see https://developers.redhat.com/blog/2017/03/10/wimplicit-fallthrough-in-gcc-7/)
can be used on GCC 8 to prevent fall through warnings
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
Change-Id: I6f22e023191bbf22d8b01f1812061795a6494134
|
|
MAC address can be configured through the [port] section.
However this had only some effect on packets being transmitted.
For instance it was used to set the src mac address by the generator.
It had no effect on packets reception: when not in promiscuous mode
only the packets with the MAC originally set by the HW were received.
Now, when not in promiscuous mode, only packets with MAC as defined
in [port] section will be received.
Change-Id: I064817bf6727d098e89fbbb7a90412ed599f0fb6
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
rx_queue_stats_mapping and tx_queue_stats_mapping were called
unrespective of the number of active queues, and failing
on all unactive queues. this caused lot of errros in prox.log
Change-Id: I15ecb7adfb562caff8efb0eb24c341a3ba354571
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
Xavier Simonart
Luc Provoost
Yury Kylulin
Illia Polliul