| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
- vdev devices now support VLAN.
- kernel tap device can be configured with a netmask (/24 was
always used in previous version).
- when sending a (fake) packet to the kernel, this packet will now
not be routed by the kernel (i.e. it will leave through the
interface configured by PROX). This might change in the futture
when PROX supports multiple VLANs per port. But today it prevents
ARP being sent on management interfaces.
- Log error in case kernel unable to send packet.
- Added support for comments (';') in lua sections.
- Prevent duplication of local_ipv4 - should now be configured in port section
local_ipv4 in core section still supported
Change-Id: I8f9a40fe6ad6f3013ff91b58b44627c7f34081e6
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
This commit prepares PROX for supporting changes from DPDK 19.08
Mainly, the "sed" listed below were run.
In addition,
- some forward definition have been removed,
- prox_compat.h has been updated
- prox_compat.h has been included where necessary.
Hence such a commit is rather easy to review and to reapply
on other branches if necessary.
sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.h
sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.c
sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.c
sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.h
sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.c
sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.h
sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.c
sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.h
sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.h
sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.c
sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.c
sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.h
sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.c
sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.h
sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.c
sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.h
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.c
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/struct prox_rte_ether_addr_copy/prox_rte_ether_addr_copy/g' *.c
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.c
sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.c
sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.h
sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.c
sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.h
sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.c
sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.c
sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.h
sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.c
sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.h
sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.c
sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.h
sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.c
sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.h
sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.c
sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.h
sed -i 's/TCP_SYN_FLAG/PROX_RTE_TCP_SYN_FLAG/g' *.c
sed -i 's/TCP_RST_FLAG/PROX_RTE_TCP_RST_FLAG/g' *.c
sed -i 's/TCP_FIN_FLAG/PROX_RTE_TCP_FIN_FLAG/g' *.c
sed -i 's/TCP_ACK_FLAG/PROX_RTE_TCP_ACK_FLAG/g' *.c
Change-Id: I4dfe8be68e618c94dcaae28754579fbeb571bb00
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Add support for pkt_inline of jumbo frames.
Dump the whole packet, and not a truncated packet. This might
have a small impact on performance as the memory footprint
is increased (by ~640K * number of tasks), resulting in potential
higher DTLB misses.
Change-Id: I4ed02be7ca899db4f8f97355c180a92d69d39d8f
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
This feature will enable the possibility to have many cores
configured in a prox config file, and enable/disable them
through variables.
For instance, a [core $var1] section in a config file will
result in [core 1] if $var1 = 1; the whole section and section
content will be ignored if $var1=#
Before this implementation, [#core 1] or [core #] was already
treated as a commented out section (the whole section was
commented). But there was no way to define a variable $var = #
to comment a section through a variable.
Note that in today's implementation any non numerical
(except s, h, t, -) characteter in the [core] section header
(and not only #) will cause the section to be ignored.
It would probably be better to consider # (as maybe N/A and none)
as comments, and everything else as error. This is however not
supported by the change request.
Change-Id: Id4e2b27a1f9b6d595e0b442dcd971ad44a502031
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
JIRA: SAMPLEVNF-55
PROX is a DPDK-based application implementing Telco use-cases such as
a simplified BRAS/BNG, light-weight AFTR... It also allows configuring
finer grained network functions like QoS, Routing, load-balancing...
(We are moving PROX version v039 to sampleVNF
https://01.org/intel-data-plane-performance-demonstrators/prox-overview)
Change-Id: Ia3cb02cf0e49ac5596e922c197ff7e010293d033
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
Xavier Simonart
Deepak S