| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit prepares PROX for supporting changes from DPDK 19.08
Mainly, the "sed" listed below were run.
In addition,
- some forward definition have been removed,
- prox_compat.h has been updated
- prox_compat.h has been included where necessary.
Hence such a commit is rather easy to review and to reapply
on other branches if necessary.
sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.h
sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.c
sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.c
sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.h
sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.c
sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.h
sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.c
sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.h
sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.h
sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.c
sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.c
sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.h
sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.c
sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.h
sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.c
sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.h
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.c
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/struct prox_rte_ether_addr_copy/prox_rte_ether_addr_copy/g' *.c
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.c
sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.c
sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.h
sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.c
sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.h
sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.c
sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.c
sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.h
sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.c
sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.h
sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.c
sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.h
sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.c
sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.h
sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.c
sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.h
sed -i 's/TCP_SYN_FLAG/PROX_RTE_TCP_SYN_FLAG/g' *.c
sed -i 's/TCP_RST_FLAG/PROX_RTE_TCP_RST_FLAG/g' *.c
sed -i 's/TCP_FIN_FLAG/PROX_RTE_TCP_FIN_FLAG/g' *.c
sed -i 's/TCP_ACK_FLAG/PROX_RTE_TCP_ACK_FLAG/g' *.c
Change-Id: I4dfe8be68e618c94dcaae28754579fbeb571bb00
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: Ic452b22dc2522a1b49e3091cb25f2784bc505b41
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
fb0c44a fixed compilation on GCC 8 by using:
1) #pragma GCC diagnostic ignored "-Wstringop-truncation"
2) __attribute__ ((fallthrough));
However, -Wstringop-truncation has only been introduced in GCC 8 and
__attribute__ ((fallthrough)) has only been introduced in GCC 7.
Hence they caused Warnings/Errors on earlier versions.
Comments about fallthough (see https://developers.redhat.com/blog/2017/03/10/wimplicit-fallthrough-in-gcc-7/)
can be used on GCC 8 to prevent fall through warnings
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
Change-Id: I6f22e023191bbf22d8b01f1812061795a6494134
|
|
This is required for instance on gcc (GCC) 8.2.1 20180905
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
Change-Id: Id86de5d39d77c5cbf168cc51434f436f84376a4c
|
|
The "dp core stats" command supported, as other commands, multiple cores
but not multiple tasks. It now supports both (e.g. dp core stats 1-2 0-1).
This is necessary so that users can collect all statistics from PROX in one
command line.
It will return similar information on the screen or through the socket:
- if the syntax is wrong (e.g. missing task, too many cores or tasks, ...)
=> an error message is printed on the screen, and the single error line
"error: invalid syntax" is returned through the socket
- if the syntax is correct
=> one line is printed or returned for each core/task pair
=> if the core/task pair is invalid, the line reports an error
=> otherwise, the line provides dataplane statistics for the core/task pair,
with the core_id and task_id added, either at the end of the line returned
through the socket, or at the beginning of the line printed on the screen.
This means a change in behaviour when using the socket: before, when an error
happened (e.g. bad task), then nothing was returned which made it difficult for
the script to catch the syntax error.
Similar behaviour could/should be implemented for other commands.
However, care must be taken as some scripts like NSB might count the number
of lines within the output, or the number of items within the line.
This should not be an issue for dp core stats as NSB does not use it, and other
PROX scripts do not count the number of items and will be adjusted to count the
number of lines.
Change-Id: I582a671ae3d2f6493f791e80fc28e70f8e3a38d1
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
Add support for space-divided bytes in MAC string.
Support the same format as in "pkt inline".
Change-Id: I7f2136c4424c45ce4abad4082470c9c9b1b3ab05
Signed-off-by: Igor Shaula <igor.shaula@intel.com>
|
|
This feature will enable the possibility to have many cores
configured in a prox config file, and enable/disable them
through variables.
For instance, a [core $var1] section in a config file will
result in [core 1] if $var1 = 1; the whole section and section
content will be ignored if $var1=#
Before this implementation, [#core 1] or [core #] was already
treated as a commented out section (the whole section was
commented). But there was no way to define a variable $var = #
to comment a section through a variable.
Note that in today's implementation any non numerical
(except s, h, t, -) characteter in the [core] section header
(and not only #) will cause the section to be ignored.
It would probably be better to consider # (as maybe N/A and none)
as comments, and everything else as error. This is however not
supported by the change request.
Change-Id: Id4e2b27a1f9b6d595e0b442dcd971ad44a502031
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
JIRA: SAMPLEVNF-55
PROX is a DPDK-based application implementing Telco use-cases such as
a simplified BRAS/BNG, light-weight AFTR... It also allows configuring
finer grained network functions like QoS, Routing, load-balancing...
(We are moving PROX version v039 to sampleVNF
https://01.org/intel-data-plane-performance-demonstrators/prox-overview)
Change-Id: Ia3cb02cf0e49ac5596e922c197ff7e010293d033
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
Xavier Simonart
Igor Shaula
Deepak S