summaryrefslogtreecommitdiffstats
path: root/VNFs/DPPD-PROX/packet_utils.c
AgeCommit message (Collapse)AuthorFilesLines
2020-01-29Prepare for DPDK 19.08 supportXavier Simonart1-17/+17
This commit prepares PROX for supporting changes from DPDK 19.08 Mainly, the "sed" listed below were run. In addition, - some forward definition have been removed, - prox_compat.h has been updated - prox_compat.h has been included where necessary. Hence such a commit is rather easy to review and to reapply on other branches if necessary. sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.h sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.c sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.c sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.h sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.c sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.h sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.c sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.h sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.h sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.c sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.c sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.h sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.c sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.h sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.c sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.h sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.c sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h sed -i 's/struct prox_rte_ether_addr_copy/prox_rte_ether_addr_copy/g' *.c sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.h sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.c sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.c sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.h sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.h sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.c sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.h sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.c sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.c sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.h sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.c sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.h sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.c sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.h sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.c sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.h sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.c sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.h sed -i 's/TCP_SYN_FLAG/PROX_RTE_TCP_SYN_FLAG/g' *.c sed -i 's/TCP_RST_FLAG/PROX_RTE_TCP_RST_FLAG/g' *.c sed -i 's/TCP_FIN_FLAG/PROX_RTE_TCP_FIN_FLAG/g' *.c sed -i 's/TCP_ACK_FLAG/PROX_RTE_TCP_ACK_FLAG/g' *.c Change-Id: I4dfe8be68e618c94dcaae28754579fbeb571bb00 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-02-07Fixed typo in setting up ARP timersXavier Simonart1-1/+0
Change-Id: I5b550a42b27d697f77c4bafab890ba57279f8d13 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-02-07Merge "Fix memory leak in L3 submode"Deepak S1-1/+1
2019-02-07Merge changes from topic 'fix_non_dataplane_pkt_count'Deepak S1-2/+3
* changes: Prevent dropping ARP packets Do not add count of non dataplane packets to dropped count
2019-01-30Fix memory leak in L3 submodeXavier Simonart1-1/+1
In L3 submodes, there were two memory leaks - when a L3 core was restarted, causing around 2MB leak and a potential issue after 256 start/stop - a potential mbuf leak when handling arp replies Those have been fixed Change-Id: I348478fa5967936297850432e93667e12b0adac4 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-01-28Add support for configurable arp timers in L3 modeXavier Simonart1-7/+16
L3 mode supports two timers: - arp_update_time, defaulted to 1 second, which makes PROX to send arp request every second for active flows - arp_timeout, previously defaulted to 30 seconds, which makes PROX consider a MAC address as invalid if no arp_reply was received within those 30 seconds. Those timers values were hardcoded. They can now be configured through the configuration file (within the core section), using resp. "arp update time" and "arp timeout" keywords. Unit is milli seconds. The default becomes respectively 1 second and 2 weeks. Change-Id: I35e46e97df32ca44c2cdfae85a20ee015de5d6e1 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-01-03Prevent dropping ARP packetsXavier Simonart1-2/+3
JIRA: SAMPLEVNF-152 When system is overloaded, ARP packets were sometimes dropped, as any other packets. This was causing two issues: - The count of TX non dataplane packets was wrong - If many consecutive ARP packets were dropped, the underlying switch might see its ARP timer expiring, causing performance degradation (packets being broadcasted). ARP packets are now always sent as no-drop. Change-Id: I9a86cbf8c4b56a178f86bc789153f1fa49ddf73f Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-12-13Add support for zero packet loss in PROX L3 mode.Xavier Simonart1-21/+82
In L3 mode, prox is extracting IP destination address in the packets. It uses this destination address to find the MAC address. If the MAC address is not found, it sends a ARP request. It also sends ARP request when it realizes that some timeout expired. However, PROX was using the mbuf of the existing packets (to be forwarded) to send the ARP. This resulted in packet loss. Now PROX is generating ARP requests using mbuf from an ARP mempool. Some clean up was also done. Change-Id: Icb6083a8cdf88789553ad23c32ca12d6b7ba7f08 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-12-13Clean up debugging messagesXavier Simonart1-2/+0
Print IP address in a.b.c.d format instead of one 32-bit number. Better align debugging information in log file Change-Id: Icfab30836ba83d53f700fcfbdfbd7cf238ed7bf8 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-10-28Add support for counting non dataplane related packetsXavier Simonart1-0/+1
When performing some zero packet loss performance testing on dataplane, it is important (not) to count non dataplane packets. For instance, one might receive uexpected packets from a switch, or ARP packets. Or one might need to transmit ARP packets. Such packets should not be counted as dataplane packets as for thse packets there is no 1:1 mapping between transmitted packets and received packets. To support this, the counters reporting numbers of transmitted and received packets remain unchanged but two new counters have been added to PROX, counting respectively number of received and number of transmitted non-dataplane packets. On RX side, packets are counsidered as non-dataplane if being ARP or if they do not countain the proper signature On TX side, ARP packets are not considered as dataplane packets. This feature requires configuration of signature. "dp core stats" command has been added Change-Id: I98e113cd02f36d540383d343a433592867ad86a9 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-03-30Add support for multiple GEN tasks running on the same coreIgor Shaula1-1/+1
resolve memory allocation issue Change-Id: I90bbf711a6a7a4869e5024c061470d9779839a60 Signed-off-by: Igor Shaula <igor.shaula@intel.com>
2017-10-25Merge changes from PROX-v041Patrice Buriez1-0/+274
Change-Id: Ie6d4e7ce22c27967117a446626f5923643397812 Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>