| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Rework of some of the code for better readability
Change-Id: I559e88faba31d93e593d39cf436f3e114ba4528a
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
A cgnat test can now be executed. This test needs 3 PROX instances. The
first one, the generator needs to have an interface on the private
dataplane network. The second instance, the cgnat needs to have it's
first dataplane interface on the private network, while the second data
plane needs to be on the public network. The third instance will be
playing the role of internet server that the generator is connecting to.
It will have one dataplane interface on the public network. This third
instance will increase the packet size of the received packets by
padding it with zeros and it will send the packets back to the cgnat
mutliple times. How many times is defined by a multiplier in the
cgnat.cfg file.
In that cgnat file, we also define a range of IP addresses that will be
used for the dynamic source IP NAT-ing. Make sure that the ports are
allowed to accept other IP addresses than their own (e.g. allowed
address pairs) and that the range of IP addresses is not overlapping
with other machines in the public network.
Change-Id: Ibc1c8513ac4e8a304378814fceb28c090dff895f
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
When scripts are doing an ssh or scp to the PROX instances, errors were
sometimes hidden. E.g. when we try to upload a config file to the PROX
instance that is already existing but owned by another user, we would
not see the error on the screen.
Note this will only happen if you build your own image. In case you use
the pre-canned PROX images, this should not cause issues.
Change-Id: I94176b737cd548c93afc71450a85910d7eca2b0c
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
tuned-adm is now run through check_prox_system_setup.sh at the first
system startup/reboot. This will result in the correct grub cmdline
parameters.
We are also coying the default rapid_rsa_key in the authorized_keys of
the rapid user, which is now the default user to run the tests.
Fixed also an issue in handle_mirror.c: using now ETYPE_IPv4.
Changed deploycentostools.sh to reflect the changes done when building
the image with disk-image-create.
Change-Id: I5933d21faef9fe02b56c01d0b96e2c143cc5476d
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
Change-Id: Id2a3fc69d097024cff608103ba7310388a273976
|
|
Changed PROX and the python scripts so that the "lat all stats" command
also returns the mis_ordered, extent and duplicate statistics.
In order to make this work properly, we need now to also stop and
restart the latency cores, every time we stop and start the generator
cores, since the sequence numbers are reinitialised every time we start
the generator core.
Change-Id: Ic4212a989c8ee9d0f026a34ca63a08b982c32b71
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
For Kubernetes environment core ids in the config and test files are relative and
automatically remapped to the allowed cores allocated for container.
There is no change to the baremetal or VM environment.
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Change-Id: I63e499723e8213de1b05d4175eb3eddc4492ccf5
|
|
In a previous change, all test files were moved to the tests
subdirectory. When not specifying the test file on the command line as a
parameter, the default test file is used, as specified in
rapid_defaults.py
It did not reflect the fact that all test files were moved to
this directory.
Change-Id: I5c77b75dbdde040d0e30dda2b97e981dff572f2f
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Make image more universal and add rapid scripts for mgmt from the container.
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Change-Id: Ia46a8e147f978dd64bfe6c7b44f7dff92e241855
|
|
All test files are now in the tests directory. All PROX config files
moved to the configs directory. When specifying a test on the
runrapid.py command line, you should now also mention the directory:
e.g. --test tests/basicrapid.test
In these test files, you need now to also include the configs
subdirectory when specifying the prox configuration that needs to be
used.
The --map parameter has also changed. It can still take the file name
of the map file, that specifies which PROX instance to use during a
test. On top of that, you can now also specify a list of indices of the
machines to be used during a test: e.g. --map [1,3].
Change-Id: I887cba59834dd8c903a22bc80959b10da2775398
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Adding default RSA keys for SSH access.
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Change-Id: Id9552717591a805562f3ed2f840251bd9f6a71c1
|
|
Sending now a 'quit' command to PROX, so that the thread running PROX in
an ssh session is now cleaned up correctly.
Also fixed a problem with the logging when running the code more than
once. We only create handlers now, when they do not yet exist.
Updated the rapid version.
Also added some more tests in the testcases.yaml for xtesting.
At the end of a run, the PROX.log files are copied in the results
directory.
The success criterium for a test 'pass_threshold' has been removed from
the test files and is to be controlled by the xtesting testcases.yaml
file.
Change-Id: Ifbbb1c91f32c9176f52025d9ae4c495b432a94c9
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Fix subnet configuration for the dataplane interface.
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Change-Id: I612113a86a960284303915d5d003bf67a1b48a72
|
|
Move to python version 3 in all scripts for kubernetes environment.
Streamline file names to match existing libraries.
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Change-Id: Id875f4240a87ab600b445cb9a7fd97ec1335f88a
|
|
Test details were only implemented in rapid_flowsizetest.py. When
executing other tests, an error occured. That is now fixed, although in
some cases, None is returned.
The format.yaml files defines now alsowhat will be reported in the
Xtesting details.
Change-Id: I5feae62dcf228664b24451d3fc5dfaaadf7edb5e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Some files were added to for rapid testing in the xtesting framework
Change-Id: Id912789c5007ca8390a67fb5b359296089aa9618
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The latency histogram dat did not contain samples collected during the
first measurement of each step. The maximum latency did take the first
step into account. As a result, you might see a test run with a maximum
latency not showing up in the latency histogram data. This has been
fixed by also including the data from the first measurement in the
histogram data. In some cases, we also reported the wrong speed from the
last unsuccessful step. This is now fixed and we do report the speed
from the last successful step.
In rapid_log.py, a fix was added to execute the rollover on the file
handler of the log file in all cases. In some cases, the file handler
with index 0 was not the file handler of the log file.
Change-Id: I6c2b16c21dd0ee17d1d14e46c4c544e185324256
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
There is a new parameter in the config_file: dataplane_subnet_mask. This
parameter is added to the dataplane IP addresses and is needed by the
Linux stack to deal with some protocols (e.g. ARP). If not present, the
default value of 24 will be used. In the end, this will make sure that
IP addresses in the rapid.env file will have this mask, e.g. /24
If you use other tools than createrapid.py to create the rapid.env file,
make sure to add the mask.
This commit also introduces a change when exiting: we only copy the
prox.log files from the different prox instances in case we expect a new
prox.log file to be created in these instances.
When using a valid format.yaml file, the tool will now also send the
latency distribution data (histogram) to the URL.
The tool is now also checking the value of bucket_size_exp: it needs to
be 11 or more.
Change-Id: I633cdc64ef687fdb6625be1e7482a5a371f83e93
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
deploycentostools.sh is now installing a recent PROX version. When using
background traffic, the tool is also reporting the total traffic that
was handled by the NFVi stack, including foreground & background
traffic.
The use of the prox_socket and prox_launch_exit was also broken in a
previous release and is now fixed.
When setting prox_socket to false for a PROX instance, we will not
create a socket connection to control that PROX instance. Setting this
option to false is not meaningful for the generator PROX instances since
we would not be able to control the behavior of the PROX generator
during the test. You could use the generator against another non-PROX
instance and then set prox_socket to false for that non-PROX instance.
Default is true.
prox_launch_exit is used to start and stop the PROX program inside the
instance. Default is true. This is useful in case you want to start PROX
manually to be able to inspect the PROX UI, but at the same time, let
the rapid scripts control the testing.
Change-Id: Ib5aa809f4be201859542769f5f55f4989dad97ef
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Different PROX instances are now started in parallel. The script is
starting multiple threads.
Change-Id: Ia8785a792240d4e9b5d5d98174bc4c5d7ae5657c
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
A new parameter can be put in the *.test files so that the requested
traffic is not generated at once, but slowly increasing up to the
requested traffic. This is important for some SW switched that adapt and
learn from the applied traffic. When suddenly applying a high traffic,
the switch might not have enough time to learn and lose packets. Only
after a period of time (up to 10 seconds?), the switch can cope with the
traffic without packet loss. In order to get reproducible results in
this case with low packet loss, please put the parameter ramp_step in
the test section of the *.test file. The step is expressed in percentage
of a 10Gb/s traffic. If the parameter is not present, the load will be
immediately applied.
When the runrapid.py script is now finished, it also copies the prox.log
files from all the prox instances. In case of issues, please investigate
this log file.
When using background traffic, the tool will also print the average
background traffic for each step in the DEBUG log. In this way, you can
check that the background traffic is actually dealing with the same
amount of traffic as the foreground. The tool is printing the packet
reception rate of the background generators.
A bug was also fixed regarding the latency percentile reporting. When
using tests involving l2gen.cfg, the values of the percentile latency
were wrong.
Change-Id: Id3dd02ed5cab084414c717cf898b30e6980ddf31
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Rapid scripts are communicating to the PROX instances. Rapid scripts
will not work with every PROX version sice sometime we change the
interface between the scripts and PROX. Hence we have a commit ID in
deploycentostools.sh to make sure we have a version of PROX that we can
work with. This change will now ensure we have a recent PROX version
when we use deploycentostools.sh to build an image.
Change-Id: Ia634f61a2dc8f49188cec6697ebf5f980d35ce7d
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Even if the latency thresholds were defined in the TST009 test files,
the values were ignored and replaced by 'inf', whcih means the
thresholds were not taken into account to define a successful step. If
the thresholds are not defined in the test files, they are still set to
'inf'.
Change-Id: I9559f05fb6066ab8759900abe3eb53ff4662e510
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
UDP and IP packet length and source UDP port and destination UDP port
were wrongly set for IPv6 packets.
In the *.test files, there is now an optional boolean field (ipv6) in
the [TestParameters] section. When set to true, the generator will use
the IPv6 packet layout to place the right values at the proper offset
in the packet. If not present or set to false, the IPv4 layout will be
used. Note also that packet size needs to be at least 84 bytes for IPV6
traffic since we need space for latency and other information in each
packet.
Packet loss ratio is now printed as a percentage of the total packets
sent.
Change-Id: I2136e87f3032348ae95b69052be7da8461c6303c
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The IRQ test has been reworked to increase the accuracy of the IRQ
measurements. Results can now also be pushed to a Prometheus push
gateway or to OPNFV's Xtesting. In order to do so, a new file
format.yaml has been introduced. Please use this file now to specify the
details of the PushGateway or the Xtesting server.
Added new test: increment_till_fail.test
Change-Id: I111aae3e099bc03e3d2ddd1014a0301bac356e0b
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Due to the recent changes in the rapid scripts, Kubernetes environment need to be adjusted.
Ready for test flag file for the runrapid script created during the container start.
TUN device configuration added.
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Change-Id: I097aafbd1d1d102aa61b8b86842afcb2d6a51338
|
|
Change-Id: Iae0a0d95b5a216463ec7511337be4019fdd4359f
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Using vfio in stead of igb_uio. DPDK 2020.5 is NOT compiling the igb_uio
driver by default any more.
For the l3 mode, we are now using the new PROX vdev feature. This is
achieved by adding the vdev parameter in the port section of the PROX
config files. One of the advantages is that we can now ping a port
managed by PROX: the requests will be forwarded by PROX to the LINUX
stack, who will reply to the ping. A tap device is being created by PROX
to support this feature.
Installing old version of nasm since latest causes some issues.
If not pushgateway is being used, it should be commented out in the
config_file.
vfio is now loaded by specifying the module in /etc/modules-load.d
There is also an after_boot.sh script that will be run by
check_prox_system_setup.sh, which can be used for further configuration
of the instance after boot.
There is now also a file created /opt/rapid/system_ready_for_rapid by
the check_prox_system_setup.sh script. This file is created once all
configuration is done. The runrapid.py script will wait till this file
is created before executing any tests.
Change-Id: Ic5c41af82642066af42134c3323297f5a06f6f72
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Option for Kubernetes environment clean up (createrapidk8s.py -c) from the test pods added.
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Change-Id: I1c6c7090462b55fbadd1d8f1a277470a6eeb2dee
|
|
Fix scripts and build procedure to use /opt/rapid as a main directory for
binaries and config files.
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Change-Id: Icb38c37a85a78a6f2de2e751df5fafd624b4f1b3
|
|
All config files are now copied into /opt/rapid. We are not using the
home directory any more. The prox executable is now also copied into the
same /opt/rapid.
Change-Id: I838636167f370bf8a855a3cfb0796c659e27a3ad
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
New files created in 2020 have now the right date in the copyright
notice.
Change-Id: I8eb244beec3d793e819cce1f63c39671f18286a1
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Since runrapid.py is now supporting more than 1 dataplane interface, we
need to use a port index in the rapid.env file for the dataplane ports.
In k8sdeployment.py, we only support 1 dataplane port, but we are
writing dp_ip1 and dp_mac1 in the environment file. The copyright dates
are also updated. Some references to VM have also been changed to instance.
Change-Id: Ie1d036c13ef5d6f0aa1f35aa068a9760a1cfc2a9
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
IPV6 test has been added. The generator will now generate IPV6 packets
using NDP to resolve MAC addresses. The hex IP addresses in the inline
definition of the packets in the cfg files is now calculated by a lua
function called in parameters.lua. The hard-coded path /home/centos has
been replaced by ~. An error in the speed calculations has been fixed.
See the RapidTest class for details. The actual number of generated
flows is now reported. If the requested number of flows is not a power
of 2, the lowest power of 2 that is larger than the requested number of
flows will be used and reported.
Change-Id: I36b8d345b4a03c2cf358c19ec353ca8ad2831293
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
All packet size in the *.test files have been replaces with imix sizes.
imix is now a list of packet sizes. If you want to run with only a
pakcet size of 64, you need to specify a list containing only 1 size:
[64].
You can also specify multiple imix values by specifying a list of list
of sizes. The keyworkds in the test files are now imix & imixs.
Change-Id: Iea47c0266b022133b7bbfc9a6811e3199ae41521
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
yaml files have been added to the repo as an example. Please check the
README explaining the output section reqs for this yaml file. There is
also a new file (config_file): it also specifies which yaml files to
use. multiple dataplane interfaces per VM can now be specified and will
appear in the <STACK>.env file. An error in setting the packet size has
been fixed (see set_udp_packet_size for packet size setting details)
Change-Id: Ie89a4940521dac7dd3652acca477739abb9f5497
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The code has been rewritten in multiple classes and files for better
readability and maintainability. You should now also use Python3 to run
the scripts. Some of the variables in the config files have moved to
other sections. The pushgateway parameter moved to the [varia] section
of the rapid environment file.
Change-Id: Ic61a1bc3baa39447d42b21dfcc0f16c28fcdfa6e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Variables were initiales based on the file name of the PROX
configuration files. These decisions are now based on the content of
these files and other variables, rather than just the name of a file.
This commit also fixes some bugs: irq test was not executing any more,
some issues with the push gateway reporting.
Change-Id: I39308effad3c80cf52d96e4d85d92d4b5f0be9a5
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
In case of kubernetes based deployments procedure for test environment
creation is different. Please refer to README.k8s file for more
details.
Dockerfile and dockerimage.sh files can be used to create a docker
image with prox.
There is separate createrapidk8s.py script which is used to create
appropriate number of PODs for testing based on the rapid.pods
configuration.
port_info is a helper application to identify port MAC address.
Change-Id: I73611f066ac54260aa11dd17c173379df06f46a5
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
Updated deploycentos.sh with latest PROX commit ID and took another code
review comment into account.
Change-Id: Iedfa695be7496459d990f36e2dc00c8890b19fb3
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Implemented the code review comments I got on previous commits and using
commit ID 2cd03b7 to select the PROX version that will be installed in
the VMs through deploycentostools.sh
Change-Id: Ifc4c18c657a8bd57c68a7fc9d885c75ffdcb7b5d
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Various code review comments taken into account. We also support now
background traffic, meaning the scripts will start a test between
machines and monitor packet loss, latency, etc., but at the same time,
the script will also start traffic on background machines. That traffic
will not be monitored. Each generator will generate the same ammoung of
traffic.
Change-Id: I5cd495be230a526f91de965f3d4dd0581681f5ca
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
When no sut_sock monitoring the swap, the while loop would never come to
an end. Also added heartbeat timeout in the generator config files.
Change-Id: I3c36991c65b9b826faf3d051a1354ca7eb34c24e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
A new parameter bucket_size_exp in the *.test file specifies the bucket
size for latency measurement. The default is 11 which corresponds to a
bucket size of 1 usec for a 2GHz processor. This fix is also calculating
the bucket size based on the reported frequency. Before it was assuming
a 2GHz processor.
Change-Id: I70d15e90e151a7e474cd05c9ac91b71a11fd5c78
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
We are now reporting a percentile number for the round-trip latency. The
numbers are only correct for processors running at 2GHz. Will fix this
next so it runs for any freqency. We only report 1-127 usec. If the
latency goes higher, we are now reporting "VERY HIGH".
Change-Id: If9fda63cea8616febcc0f24dc52590976cf39f3d
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Previously, there were 2 functions: run_flow_size_test and
run_fixed_rate. The functionality of run_fixed_rate is now added to
run_flow_size_test.
Change-Id: Ifda70b8088b9131cc6c034d8007825e6d0917682
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The lacency accuracy warning is now given only taking into account
packets that were not dropped. Also fixed an error with the value of r
in the run_iteration function
Change-Id: Ic05fd2e4b8c59a4b7bcc131e981c08e0001436a6
Signed-off-by: Luc Provoos <luc.provoost@intel.com>
|
|
New test added TST009_Throughput.test allowing to run the throughput
benchmark as defined in ETSI GS NFV-TST 009. This change adds the binary
search algorithm as defined in the specification document.
Change-Id: I00e81a811a9c42b06136694fc1387bc59e954a28
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Removed the remaining UUIDs from the centos.json file, making it easier
to reuse this file. This does require a recent version of the packer
tool. Updated the README accordingly and also added the --env option in
the packer alias, so that the OS_CLOUD variable is set when running
packer in the container. Updated rapid.vms with the security group name
used in the centos.json file.
Change-Id: I4f6815a3250811e336c14857e0ec5e7793a77acf
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Fixing an error re-introduced in the swap.cfg file. The mempool size
needs to be bigger than the number of rx and tx descriptors (we need
some extra buffers in the mempool for other things than rx and tx
descriptors). The default number of tx and rx descriptors has been
changed in PROX to 2K. This initially went through the testing since
this is just giving a warning in the prox.log file for some PMDs. For
other PMDs, PROX will not start.
Also fixed an inconsistency in rapid.vms: name of the security group.
Change-Id: If95677bd6169a16da1b3b2a56d13936a854c385e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
Luc Provoost
Cédric Ollivier
Yury Kylulin
Xavier Simonart