| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The IRQ test has been reworked to increase the accuracy of the IRQ
measurements. Results can now also be pushed to a Prometheus push
gateway or to OPNFV's Xtesting. In order to do so, a new file
format.yaml has been introduced. Please use this file now to specify the
details of the PushGateway or the Xtesting server.
Added new test: increment_till_fail.test
Change-Id: I111aae3e099bc03e3d2ddd1014a0301bac356e0b
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Using vfio in stead of igb_uio. DPDK 2020.5 is NOT compiling the igb_uio
driver by default any more.
For the l3 mode, we are now using the new PROX vdev feature. This is
achieved by adding the vdev parameter in the port section of the PROX
config files. One of the advantages is that we can now ping a port
managed by PROX: the requests will be forwarded by PROX to the LINUX
stack, who will reply to the ping. A tap device is being created by PROX
to support this feature.
Installing old version of nasm since latest causes some issues.
If not pushgateway is being used, it should be commented out in the
config_file.
vfio is now loaded by specifying the module in /etc/modules-load.d
There is also an after_boot.sh script that will be run by
check_prox_system_setup.sh, which can be used for further configuration
of the instance after boot.
There is now also a file created /opt/rapid/system_ready_for_rapid by
the check_prox_system_setup.sh script. This file is created once all
configuration is done. The runrapid.py script will wait till this file
is created before executing any tests.
Change-Id: Ic5c41af82642066af42134c3323297f5a06f6f72
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
yaml files have been added to the repo as an example. Please check the
README explaining the output section reqs for this yaml file. There is
also a new file (config_file): it also specifies which yaml files to
use. multiple dataplane interfaces per VM can now be specified and will
appear in the <STACK>.env file. An error in setting the packet size has
been fixed (see set_udp_packet_size for packet size setting details)
Change-Id: Ie89a4940521dac7dd3652acca477739abb9f5497
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
In case of kubernetes based deployments procedure for test environment
creation is different. Please refer to README.k8s file for more
details.
Dockerfile and dockerimage.sh files can be used to create a docker
image with prox.
There is separate createrapidk8s.py script which is used to create
appropriate number of PODs for testing based on the rapid.pods
configuration.
port_info is a helper application to identify port MAC address.
Change-Id: I73611f066ac54260aa11dd17c173379df06f46a5
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
-Renamed monitorswap.test into corestats.test. This is a more generic
test case that can monitor the core statistics of all PROX instances
-New portstats.test which can monitor the port statistics of all PROX
instances
-Removed the tasks parameter in the [DEFAULT] section of the *.test
files. Runrapid.py is now scaning the PROX configuration files to
automatically detect the PROX tasks that are being used.
-There is now an option to add the PushGateway parameter in the
[Default] section of some *.test files. This will push the measurements
to the Gateway, so they can be used by tools like Grafana. The logging
of the data in a csv file has also been improved. Results can now be
found on the screen, in the RUN*.log files, in the *.csv files and are
being pushed to the PushGateway.
-In the *.test files, replaced the swapcores, irqcores and impaircores
by the cores parameter since they are not treated differently by the
code. For a generator, we are still using the gencores and latcores
parameters since we need to treat them differently in runrapid.py
-devbind.sh is removed from the repository since this file is now
created by runrapid.py
-renamed the rapidVMs.vms file into rapid.vms
-image is now built without ssh access for root. Only using centos user.
runrapid.py is now using centos user for ssh sessions. PROX tools are
strted using sudo
-using new DPDK, mb_lib and PROX versions as defined in
deploycentostools.sh
-installing missing yum-utils package in image
-added flowsize parameter to the impairtest
-added list of flowsizes to the fixed_rate testing (l3framerate.test)
-the irqtest can now loop through multiple Test Machines in stead of
only checking the irq of one. Note that we should have the same cores
parameter for all Test machines
-changes in prox_ctrl.py to support setting the speed of a generator on
a combination of mulitple cores and tasks. Also added the
multi_port_stats function to support the new portstats.test
-Updated version to 19.11.21
-Fixed some power of 2 in the flow table
Change-Id: Ia14543bf3195a2b1bd4184b455da6940f1777fc9
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Taking into account comments from Patrice and Xavier
Change-Id: Ifdabd1945e074c9ee97b059956f107901392c020
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
- Change inittest in warmuptest. This has now a warmuptime, warmupspeed,
packet size and flow size.
- Change in centos.json. This will now also copy deploycentostools.sh
during image building so that it can be used to re-compile prox in the VM
by typing "./deploycentostools.sh compile"
- runrapid.py parameters needing a file name, need to be complete file
names: no extensions will be added any more by the scripts.
- Changes in createrapid.py to handel the openstack CLI output in a
simpler way.
- The management interface of the VMs can now also be an SRIOV interface.
We have now an extra optional parameter in the VM sections of the
rapiVMs.vms file: SRIOV_mgmt_port
- Changed the name of some sections and keys in the environment file since
runrapid.py will not always communicate to OpenStack VMs. This could be
containers or any other (virtual) machine.
- The previous MachineMap.cfg has been renamed to machine.map
- A new test has been added: monitorswap is just showing the statistics of
a swap (virtual) machine, without generating any packets. This is useful
in situations where an external tester is used.
- Latency and core statistics can now be measured even if there are
multiple PROX cores and tasks running. A new parameter has been added in
the test files with following default value: tasks=[0]. During the
collection of statistics, all tasks in this list will be queried. It is
ok to have a non-existing task in such a query since it will be ignored.
- A --screenlog parameter was added for runrapid.py allowing for more
detailed output on the screen during debugging. No need to check the log
file.
- Previous tests to run multiple packet size with a given flow size and to
run multiple flow size, with a given packet size are now combined by
specifiying 2 lists: packetsizes & flows
- The screen output of this test has also been reworked with more
meaningful column names and the test result is now in the field "core
received". This allows also for faster termination of the test: When the
all packets sent by Gen NIC are received by the cores within the
thresholds for packet loss and latency, the test is now stopped, even we
were requesting more packets to be sent.
Change-Id: I3307e7a972f2140e739f376f146fe875df0303e6
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The scripts are orrignally written to support an OpenStack deployment.
We are now making changes to support container environments, hence
renaming the directory to rapid.
Change-Id: Icaa2fad83c6da451eee733934151e98e9cd07de4
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
Luc Provoost
Yury Kylulin