| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since runrapid.py is now supporting more than 1 dataplane interface, we
need to use a port index in the rapid.env file for the dataplane ports.
In k8sdeployment.py, we only support 1 dataplane port, but we are
writing dp_ip1 and dp_mac1 in the environment file. The copyright dates
are also updated. Some references to VM have also been changed to instance.
Change-Id: Ie1d036c13ef5d6f0aa1f35aa068a9760a1cfc2a9
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
IPV6 test has been added. The generator will now generate IPV6 packets
using NDP to resolve MAC addresses. The hex IP addresses in the inline
definition of the packets in the cfg files is now calculated by a lua
function called in parameters.lua. The hard-coded path /home/centos has
been replaced by ~. An error in the speed calculations has been fixed.
See the RapidTest class for details. The actual number of generated
flows is now reported. If the requested number of flows is not a power
of 2, the lowest power of 2 that is larger than the requested number of
flows will be used and reported.
Change-Id: I36b8d345b4a03c2cf358c19ec353ca8ad2831293
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
All packet size in the *.test files have been replaces with imix sizes.
imix is now a list of packet sizes. If you want to run with only a
pakcet size of 64, you need to specify a list containing only 1 size:
[64].
You can also specify multiple imix values by specifying a list of list
of sizes. The keyworkds in the test files are now imix & imixs.
Change-Id: Iea47c0266b022133b7bbfc9a6811e3199ae41521
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The code has been rewritten in multiple classes and files for better
readability and maintainability. You should now also use Python3 to run
the scripts. Some of the variables in the config files have moved to
other sections. The pushgateway parameter moved to the [varia] section
of the rapid environment file.
Change-Id: Ic61a1bc3baa39447d42b21dfcc0f16c28fcdfa6e
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
We are now reporting a percentile number for the round-trip latency. The
numbers are only correct for processors running at 2GHz. Will fix this
next so it runs for any freqency. We only report 1-127 usec. If the
latency goes higher, we are now reporting "VERY HIGH".
Change-Id: If9fda63cea8616febcc0f24dc52590976cf39f3d
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
-Renamed monitorswap.test into corestats.test. This is a more generic
test case that can monitor the core statistics of all PROX instances
-New portstats.test which can monitor the port statistics of all PROX
instances
-Removed the tasks parameter in the [DEFAULT] section of the *.test
files. Runrapid.py is now scaning the PROX configuration files to
automatically detect the PROX tasks that are being used.
-There is now an option to add the PushGateway parameter in the
[Default] section of some *.test files. This will push the measurements
to the Gateway, so they can be used by tools like Grafana. The logging
of the data in a csv file has also been improved. Results can now be
found on the screen, in the RUN*.log files, in the *.csv files and are
being pushed to the PushGateway.
-In the *.test files, replaced the swapcores, irqcores and impaircores
by the cores parameter since they are not treated differently by the
code. For a generator, we are still using the gencores and latcores
parameters since we need to treat them differently in runrapid.py
-devbind.sh is removed from the repository since this file is now
created by runrapid.py
-renamed the rapidVMs.vms file into rapid.vms
-image is now built without ssh access for root. Only using centos user.
runrapid.py is now using centos user for ssh sessions. PROX tools are
strted using sudo
-using new DPDK, mb_lib and PROX versions as defined in
deploycentostools.sh
-installing missing yum-utils package in image
-added flowsize parameter to the impairtest
-added list of flowsizes to the fixed_rate testing (l3framerate.test)
-the irqtest can now loop through multiple Test Machines in stead of
only checking the irq of one. Note that we should have the same cores
parameter for all Test machines
-changes in prox_ctrl.py to support setting the speed of a generator on
a combination of mulitple cores and tasks. Also added the
multi_port_stats function to support the new portstats.test
-Updated version to 19.11.21
-Fixed some power of 2 in the flow table
Change-Id: Ia14543bf3195a2b1bd4184b455da6940f1777fc9
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
Taking into account comments from Patrice and Xavier
Change-Id: Ifdabd1945e074c9ee97b059956f107901392c020
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
- Change inittest in warmuptest. This has now a warmuptime, warmupspeed,
packet size and flow size.
- Change in centos.json. This will now also copy deploycentostools.sh
during image building so that it can be used to re-compile prox in the VM
by typing "./deploycentostools.sh compile"
- runrapid.py parameters needing a file name, need to be complete file
names: no extensions will be added any more by the scripts.
- Changes in createrapid.py to handel the openstack CLI output in a
simpler way.
- The management interface of the VMs can now also be an SRIOV interface.
We have now an extra optional parameter in the VM sections of the
rapiVMs.vms file: SRIOV_mgmt_port
- Changed the name of some sections and keys in the environment file since
runrapid.py will not always communicate to OpenStack VMs. This could be
containers or any other (virtual) machine.
- The previous MachineMap.cfg has been renamed to machine.map
- A new test has been added: monitorswap is just showing the statistics of
a swap (virtual) machine, without generating any packets. This is useful
in situations where an external tester is used.
- Latency and core statistics can now be measured even if there are
multiple PROX cores and tasks running. A new parameter has been added in
the test files with following default value: tasks=[0]. During the
collection of statistics, all tasks in this list will be queried. It is
ok to have a non-existing task in such a query since it will be ignored.
- A --screenlog parameter was added for runrapid.py allowing for more
detailed output on the screen during debugging. No need to check the log
file.
- Previous tests to run multiple packet size with a given flow size and to
run multiple flow size, with a given packet size are now combined by
specifiying 2 lists: packetsizes & flows
- The screen output of this test has also been reworked with more
meaningful column names and the test result is now in the field "core
received". This allows also for faster termination of the test: When the
all packets sent by Gen NIC are received by the cores within the
thresholds for packet loss and latency, the test is now stopped, even we
were requesting more packets to be sent.
Change-Id: I3307e7a972f2140e739f376f146fe875df0303e6
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
|
The scripts are orrignally written to support an OpenStack deployment.
We are now making changes to support container environments, hence
renaming the directory to rapid.
Change-Id: Icaa2fad83c6da451eee733934151e98e9cd07de4
Signed-off-by: Luc Provoost <luc.provoost@intel.com>
|
Luc Provoost