| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Change-Id: I090bf8f1cd5a5d2dfa4f336bc66c46cc03d6c5bb
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
This commit prepares PROX for supporting changes from DPDK 19.08
Mainly, the "sed" listed below were run.
In addition,
- some forward definition have been removed,
- prox_compat.h has been updated
- prox_compat.h has been included where necessary.
Hence such a commit is rather easy to review and to reapply
on other branches if necessary.
sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.h
sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.c
sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.c
sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.h
sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.c
sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.h
sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.c
sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.h
sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.h
sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.c
sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.c
sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.h
sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.c
sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.h
sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.c
sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.h
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.c
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/struct prox_rte_ether_addr_copy/prox_rte_ether_addr_copy/g' *.c
sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.c
sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.c
sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.h
sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.h
sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.c
sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.h
sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.c
sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.c
sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.h
sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.c
sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.h
sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.c
sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.h
sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.c
sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.h
sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.c
sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.h
sed -i 's/TCP_SYN_FLAG/PROX_RTE_TCP_SYN_FLAG/g' *.c
sed -i 's/TCP_RST_FLAG/PROX_RTE_TCP_RST_FLAG/g' *.c
sed -i 's/TCP_FIN_FLAG/PROX_RTE_TCP_FIN_FLAG/g' *.c
sed -i 's/TCP_ACK_FLAG/PROX_RTE_TCP_ACK_FLAG/g' *.c
Change-Id: I4dfe8be68e618c94dcaae28754579fbeb571bb00
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
- When using "pcap file" argument in PROX config file in the gen mode
(and no submode), packets were truncated to 8 bytes (and a warning printed)
This has been fixed.
- "Set value" command was checking whether offset was within first 1518 bytes
unrespective to the mtu (e.g. jumbo packets). This has been fixed.
- There was a limit of 64K packets loaded from a pcap file (which could be
overwritten through PROX config). This limit has been removed - by default
all packets from pcap are loaded
- When pcap was loaded, memory was allocated to store the packet. However
just enough memory was allocated, so that there was no way to change (increase)
packet size through command line after that. Now memory is allocated to store
up to mtu size
- While "set value" command was acting on all packets, "pkt size" command
was only changing the first packet. This has now been changed and both commands
change all the packets.
- A few other minor cleanups.
Change-Id: I7264cee8d57e3e6a405dfd7e7a52a95b99399d99
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
In addition to resetting all values set by the user, reset value was also
resetting internal configuration. It resulted that the src mac address
in the outgoing packet was set to whatever was specified in pkt inline,
which is wrong (by default src mac address should be set the the port mac address).
Note that reset value reset any "set values" but does not reset
the packet size.
Change-Id: I9d1cd92be9f5814bd7b104932dd6ffe5df3b6edd
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Accuracy of latency is obtained by writing TX accuracy for packet N
in a later packet i.e. packet N + WINDOW.
If this window is too small, packet N + WINDOW (conveying accuracy
for packet N) might arrive before packet N, resulting in no accuracy
for packet N.
This change increases this window from 64 to 8K packets.
This change should result in a higher number of packets used for
latency measurements when packets are reordered.
This change might have a performance impact as it uses more memory.
Change-Id: I1016fddb66af86605c73a24050238da41cf54152
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
When PROX fails to transmit packets (e.g. because switch or NIC
is overloaded) some cleanup needs to be done related to packet id
and latency.
In addition, in some casesi, the clock estimate is slighly over-estimated
which might result, in rare cases, in negative (hence very high) latencies,
due to the extrapolation of timestamps.
This has been workarounded bydecreasing the extrapolation, tolerating up to 1%
clock estimate error
Change-Id: I1ba17dfe0d5e2f9f9167f4f087ed0d96da1293c2
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
The Signature is now written in the pkt template
instead of being written in each packet
Change-Id: I58ca99ff47260b82ce9471b7a47a11edbd14c582
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Improve PROX generator performance by pre-calculating bytes_to_tsc.
This improvement is only implemented for non-pcap
generator, where only few different packet sizes are usually generated.
This change might have a negative performance impact in some cases, if
many different packet sizes are generated, resulting in higher memory usage.
This is the case for instance if random is applied to packet size.
In addition, simplified the rx path, receiving now only MAX_PKT_BURST packets
per handle loop.
Before we were trying to empty the NIC looping on RX packets, ending up
with many rx packets per handle loop. This was used to determine an lower bound
for the time the packet was received.
We now set the lower bound when less than MAX_PKT_BURST has been received.
Change-Id: I1ce813d7e4ac1577ea412c590add5d6f94b36ec7
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Improve PROX generator performance by
- Cleanup some old code checking for unset flags
Change-Id: Icd7ff0a8d17f11f1a1bd09bef4fb40574257c093
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
JIRA: SAMPLEVNF-151
link speed is used in gen and lat latency extrapolations.
Using a link_speed value lower than the actual link speed
might result in errors (e.g. negative latencies).
Negotiated link speed might be reported slowly (as reported through irq)
Hence it is better to use the device capability link speed.
In addition, this remove the check for link speed changes in fastpath.
Change-Id: I0f475fe5e139b046012de6cd0b710e4390735078
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Gen mode requires a tx ring or a tx port. A configuration without those
should gracefully report an error. This was causing a crash.
Change-Id: Ia30d4d4c87a694da1dfed86587f90b9199c493ab
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Improve DPDK 18.05 support introduced by 3e532aca.
Support for DPDK 18.08.
Change-Id: Ide712ee94254b506a0ad88c95a7e01b789f99d48
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
mbuf size was setup to achieve the best performance i.e.
using the smallest mbuf and not segmenting packets.
However this resulted in complex code, much dependent of the way
the pmd are working e.g. a change(fix) in recent dpdk i40e
implementation caused a 1782 (=1518+8+256) bytes mbuf to be too
small to hold a 1518 bytes packets.
Hence this change simplifies the mbuf size selection at the price
of a potential decreases in performance - as more memory is now used.
Except if jumbo frames are used, the mbuf size will now be the same
for all modes. The packets will not be segmented except if jumbo
frames are enabled.
If jumbo frames are enabled, packets are by default segmented, except
if the mbuf size is configured big enough in the config file.
Change-Id: I222fcac7a65c0d221d5d422f419deb9c0f864172
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
|
Change-Id: I63af4e5c5c01a4412d517e33fc7111481fd0524a
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
When link is down at startup, the link_speed returned by DPDK
is 0. This results in un-optimized latency estimates in gen and lat.
With this fix, lat and gen do nothing until link_speed is
properly initialized, and use the right link speed in the fast path.
Change-Id: Id2d14b6966ccfac7cc78db3c5a74e704b42edae7
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Link_speed could be null when prox started with the ports down.
This was potentially causing a crash.
Another task will need to update link speed when the port come
up. Failing to do this results in less accurate latencies
(no extrapolation)
Change-Id: I597b68e30117e6edb9ccb4732c2acedd5eb8ac80
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
- Also changed lat_info.tx_packet_index to uint64_t,
so also did it for task_lat.prev_tx_packet_index and n_loss.
- Adjusted format strings accordingly, and fixed some other formats.
- Adjusted overflow increment to 2^32 (i.e. UINT32_MAX + 1).
- Replaced hard-coded 64 with ACCURACY_BUFFER_SIZE (still hard-coded
in handle_gen.c).
Change-Id: Ia59f36e17c0797a2a958dbe3b2ac420263473524
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
When doing latency measurements PROX takes into account the
generation or reception of a bulk of packets. For instance, if
PROX receives at time T 4 packets, it knows that the first
packet was received by te NIC before T (the time to receive the other
3 packets, as they were received at maximum link speed).
So the latency data is decreased by the minimum time to receive those
3 packets.
For this PROX was using a default link speed of 10Gbps. This is wrong
for 1Gbps and 40Gbps networks, and was causing for instance issues
on 40 Gbps networks as extrapolating too much, resulting in either
too low latencies or negative numbers (visible as very high latencies).
Change-Id: I4e0f02e8383dd8d168ac50ecae37a05510ad08bc
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Different checks were done when setting the generator pkt_size.
In case of wrong pkt_size (e.g. too big) an error was printed but
the pkt_size was still set causing a potential corruption.
In addition, in case of a packet size incompatible with some
of the packet fields (e.g. latency data) PROX was panicing
while this should not happen runtime for such an error.
Change-Id: Ifa11475bf295aaac7b0255c1bf9b5feed8ef90c4
Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
|
|
Change-Id: Ie6d4e7ce22c27967117a446626f5923643397812
Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
|
|
JIRA: SAMPLEVNF-55
PROX is a DPDK-based application implementing Telco use-cases such as
a simplified BRAS/BNG, light-weight AFTR... It also allows configuring
finer grained network functions like QoS, Routing, load-balancing...
(We are moving PROX version v039 to sampleVNF
https://01.org/intel-data-plane-performance-demonstrators/prox-overview)
Change-Id: Ia3cb02cf0e49ac5596e922c197ff7e010293d033
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
|
Xavier Simonart
Patrice Buriez
Deepak S