summaryrefslogtreecommitdiffstats
path: root/VNFs/DPPD-PROX/commands.c
AgeCommit message (Collapse)AuthorFilesLines
2020-01-29Added support for DPDK 19.08Xavier Simonart1-6/+11
Change-Id: I090bf8f1cd5a5d2dfa4f336bc66c46cc03d6c5bb Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2020-01-29Prepare for DPDK 19.08 supportXavier Simonart1-6/+6
This commit prepares PROX for supporting changes from DPDK 19.08 Mainly, the "sed" listed below were run. In addition, - some forward definition have been removed, - prox_compat.h has been updated - prox_compat.h has been included where necessary. Hence such a commit is rather easy to review and to reapply on other branches if necessary. sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.h sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.c sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.c sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.h sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.c sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.h sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.c sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.h sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.h sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.c sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.c sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.h sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.c sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.h sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.c sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.h sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.c sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h sed -i 's/struct prox_rte_ether_addr_copy/prox_rte_ether_addr_copy/g' *.c sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.h sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.c sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.c sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.h sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.h sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.c sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.h sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.c sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.c sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.h sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.c sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.h sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.c sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.h sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.c sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.h sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.c sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.h sed -i 's/TCP_SYN_FLAG/PROX_RTE_TCP_SYN_FLAG/g' *.c sed -i 's/TCP_RST_FLAG/PROX_RTE_TCP_RST_FLAG/g' *.c sed -i 's/TCP_FIN_FLAG/PROX_RTE_TCP_FIN_FLAG/g' *.c sed -i 's/TCP_ACK_FLAG/PROX_RTE_TCP_ACK_FLAG/g' *.c Change-Id: I4dfe8be68e618c94dcaae28754579fbeb571bb00 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-09Add support for igmp and multicastXavier Simonart1-0/+83
Multicast can be enabled through configuration or through command line - Through configuration Add multicast=mcast_address (e.g. multicast=01:00:5e:01:02:03) in the port section - Through command line run enable multicast port_id mcast_address (e.g. enable multicast 1 01:00:5e:01:02:03) IGMP join message is sent unsollicited through command line: join igmp core_id task_id ip (e.g. join igmp 1 0 224.1.1.3) To enable swap answering IGMP Query (w/ IGMP Join) - Through configuration Add igmp ipv4=ip_address within the core/task section - Through command line join igmp core_id task_id ip (e.g. join igmp 1 0 224.1.1.3) (this will 1st initiate an unsollicated join, then answer any subsequent query) UDP/TCP packets received on a multicast address (224.0.0.0 => 239.255.255.255) are discarded To stop sending responses to IGMP query: leave igmp core_id task_id Change-Id: I3808ccabf3b38b5a1e10e1b044db63aa05bcd7b5 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-09Fix parsing parameter errors in start and stop commandsXavier Simonart1-1/+10
Some wrong parameters in start (such as "start all 4" while there are only less than 4 tasks available on some cores) and stop command could have potentially caused a crash in some cases. Change-Id: I6dc201575b574c53ded242ea795c35de82fb787e Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-03-06PROX generator: performance optimization (2/4)Xavier Simonart1-0/+1
Improve PROX generator performance by pre-calculating bytes_to_tsc. This improvement is only implemented for non-pcap generator, where only few different packet sizes are usually generated. This change might have a negative performance impact in some cases, if many different packet sizes are generated, resulting in higher memory usage. This is the case for instance if random is applied to packet size. In addition, simplified the rx path, receiving now only MAX_PKT_BURST packets per handle loop. Before we were trying to empty the NIC looping on RX packets, ending up with many rx packets per handle loop. This was used to determine an lower bound for the time the packet was received. We now set the lower bound when less than MAX_PKT_BURST has been received. Change-Id: I1ce813d7e4ac1577ea412c590add5d6f94b36ec7 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-10-31Support for DPDK 18.05 and DPDK 18.08Xavier Simonart1-13/+95
Improve DPDK 18.05 support introduced by 3e532aca. Support for DPDK 18.08. Change-Id: Ide712ee94254b506a0ad88c95a7e01b789f99d48 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2018-07-26Initial support for DPDK 18.05Xavier Simonart1-0/+5
This patch makes PROX compile with DPDK 18.05. However some features are disabled or will not work as expected such as: "mem info" command "police" mode Those will need to be fixed later (see DPDK1805 within code). Change-Id: Ie7d72f6ab3db68bc093c42d60d125fe86f8fbda7 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2018-02-15Fix latency accuracy and dumping latencies to fileXavier Simonart1-1/+6
- Also changed lat_info.tx_packet_index to uint64_t, so also did it for task_lat.prev_tx_packet_index and n_loss. - Adjusted format strings accordingly, and fixed some other formats. - Adjusted overflow increment to 2^32 (i.e. UINT32_MAX + 1). - Replaced hard-coded 64 with ACCURACY_BUFFER_SIZE (still hard-coded in handle_gen.c). Change-Id: Ia59f36e17c0797a2a958dbe3b2ac420263473524 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2017-11-15Add support for nop mode with l3 submodeXavier Simonart1-1/+1
The l3 submode was not supported in nop mode, as the nop mode uses some specific nop thread (and not generic). When L3 is specified, the nop mode must use the generic thread. In addition the l3 submode is implemented differently than other submodes. It is not supported through task_init structures (i.e. each task does not have to explicitely tell that it supports l3 submode). But this prevented to run both a nop with no submode and a nop with a l3 submode. Note that nop with l3 is usually not very useful - it handles arp (requests and response) but as nop, it does not swap IP addresses. So with a real switch, the packets transmitted will be received back... and l3 mode is usually mainly usefull when using a switch. However, there is at least one nop mode where l3 submode makes sense: when the nop does not transmit. In such cases, for instace used in conjunction with a gen l3, the nop receives all packets and forward the arp requests and responses to the master for handling. Change-Id: I992121db285ba25a11cbb494092a6afc6fe55a58 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2017-10-25Merge changes from PROX-v041Patrice Buriez1-1/+21
Change-Id: Ie6d4e7ce22c27967117a446626f5923643397812 Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2017-07-14Adding PROX(Packet pROcessing eXecution engine) VNF to sampleVNFDeepak S1-0/+1016
JIRA: SAMPLEVNF-55 PROX is a DPDK-based application implementing Telco use-cases such as a simplified BRAS/BNG, light-weight AFTR... It also allows configuring finer grained network functions like QoS, Routing, load-balancing... (We are moving PROX version v039 to sampleVNF https://01.org/intel-data-plane-performance-demonstrators/prox-overview) Change-Id: Ia3cb02cf0e49ac5596e922c197ff7e010293d033 Signed-off-by: Deepak S <deepak.s@linux.intel.com>