summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-06-27vCGNAPT: correcting to use default rte_ring_dequeueAnand B Jyoti1-4/+4
JIRA: SAMPLEVNF-19 The rte_ring_sc_dequeue returns ENOENT in DPDK16.04 while ENOBUFS in DPDK17.05. This leads to error in return value checking and mis behaviour. Using of rte_ring_sc_dequeue() to be avoided to use the default configuration as set during the creation of the queue as per the DPDK API documentation. Similarly corrected for mp_dequeue as well. Change-Id: Iacee1349b26d6ab432be891fad12313a6d68ca4d Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-27VNFs: rte_eth_dev is deprecated in DPDK version 16.11 and onwardsAnand B Jyoti3-7/+28
JIRA: SAMPLEVNF-17 rte_eth_dev is removed in DPDK version 16.11 and onwards. The corresponding error handling is fixed through samplevnf gerrit 34667. This patch is required for migration of VNFs to DPDK ver 17.05. Change-Id: I088b705e3261227bcba7332aeb5a2a236e77a33e Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-26tools: Adding patches for disabling the DEBUG logs in DPDKAnand B Jyoti1-0/+2
JIRA: SAMPLEVNF-45 Apply the patches to disable the default DEBUG prints in the DPDK libraries. Change-Id: If17422e8398c8798ec9e97d9f141b2a8b2a53fd4 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-26dpdk: Disable DEBUG logs by default in DPDK librariesAnand B Jyoti1-0/+13
JIRA: SAMPLEVNF-45 The default RTE_LOG_LEVEL is set to 8 enables all debug prints which impacts the performance testing. This patch sets the RTE_LOG_LEVEL to INFO to avoid printing of logs with level DEBUG. Change-Id: I1fdeecab9cd82f37f62e1ccfa625f91d1cf16217 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-26dpdk: Disable debug logs in ACL rte_table_acl_buildAnand B Jyoti1-0/+14
JIRA: SAMPLEVNF-46 Debug logs enabled by default causes delay in application initialization as there can be many ACL rules to be setup during initialization. This patch disables the ACL logs during rte_table_acl_build by default and can be enabled by setting the RTE_LOG_LEVEL to DEBUG. Change-Id: I48e642f8768135087b0ed4f1677c1c9ac9e0df58 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-23conntrack: timer reset in reply traffic causes performance impactAnand B Jyoti1-1/+4
JIRA: SAMPLEVNF-44 The UDP connection timer was getting reset for every packets with reply traffic due to connection state check. This patch avoids resetting the timer instead uses the expected timeout to reset avoiding frequent timer reset for every packet. Change-Id: I6b5aac62bb709f403aeacee75f52d099b2d2397f Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-22conntrack: Fix to avoid duplicate connections in initial burstAnand B Jyoti1-13/+2
JIRA: SAMPLEVNF-43 Before connection setup, if there are multiple packets in the burst and are belongs to same connection, it was adding new connection for the same 5 tuple connection, leading to multiple connections in the CT. It was causing more number of active connections than possible. Change-Id: I15c90e7feb465d96a9429ea6fedcb09fad9482e6 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-22vFW: Increase max number of VFW instances from 12 to 24Anand B Jyoti1-1/+1
JIRA: SAMPLEVNF-41 Next generation platforms require more than 12 instances of VFW to support more number of ports and throughout. Increasing the max instances from 12 to 24 to support upto 200Gbps in next generation platforms. Change-Id: Ice4f84dfd4a96b84e7e5ef00349892d08e1d2348 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-22Merge "vCGNAPT: remove unused function and a patch"Deepak S3-94/+0
2017-06-15Adding Sample vCGNAPT config to run with multi-port pairv1.0.0Deepak S7-250740/+970
JIRA: SAMPLEVNF-40 This patch adds sample vCGNAPT config for 1, 6, 10 port pair Change-Id: I003e98b26e794d111af562232e8688f255a7d61a Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-09vCGNAPT: remove unused function and a patchAnand B Jyoti3-94/+0
JIRA: SAMPLEVNF-21 Removing unused function rte_pipeline_action_handler_port_ext() and a patch rte_pipeline.patch which was applied on top of DPDK 16.04. These are not used, hence cleaning up for DPDK migration. Change-Id: I33a646ad27857c880969574b37412236ed3d780c Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-06Adding timer dyn timeout config in timer profile.Deepak S1-2/+15
This patch enabled dynamic tune of timer timeout [PIPELINE2] type = TIMER core = 2 timer_dyn_timeout = 20 #-- new config to change dyn timer timeout n_flows = 1048576 Change-Id: I614cf73a7fc1afd9050580286c9a968aacb619fa Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-06Set rxq and txq to same value to enable to run UDP replay on single threadDeepak S1-2/+2
Change-Id: Iee26005d5e90a7481f6e6fb3c7441a2011fe5596 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-02Enable UDP_replay on OVS deploymentDeepak S1-4/+6
Use ETHER_TYPE instead packet_type when hw-ip-check is disabled. Change-Id: Iced93b78d9f4e58011dd051e88ddd312112e0cba Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-02Adding UDP Replay VNF without arp supportDeepak S6-2/+3156
JIRA: SAMPLEVNF-8 This code adds support for UDP Replay which acts as a reflector of all the UDP packets on the requested port. Change-Id: I633e65a4964fab4cc46e2ed09c742dcc63ce6258 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-02Revert "[SAMPLEVNF] Adding UDP Replay VNF"Deepak S12-3724/+15
This reverts commit 1b0802cbf10ac4d8911f0916d4ba0b02010924c8. Change-Id: Ic2bb69125d0d849b260475026a1088911d2d7109 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-02Revert "[BUG]: Fix segfault while sending the packets back"Deepak S1-1/+1
This reverts commit b04a6e5dacc458f81097c9b8a172dcbf16d8fd50. Change-Id: Icb9a4ddea607c9dd9324a413407c266e8f6106f0 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-01CT: Perf optimization through prefetch and condition checks in CTAnand B Jyoti2-12/+43
JIRA: SAMPLEVNF-10 LLC miss is possible when the connection data structure is accessed after retrieved from hash table entries for TCP/UDP connection. CPI for rte_ct_udp_packet() is not good due to if/else condition checks. This patch provide a prefetch instructions to pre-fetch the cnxn data entry structure to avoid the LLC miss and also optimize the if/else condition check to improve the CPI for rte_ct_udp_packet() function. Change-Id: Ieaf70815c919ddbe1ff34921222eac030fb41756 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-06-01[BUG]: Fix segfault while sending the packets backDeepak S1-1/+1
JIRA: SAMPLEVNF-18 This patch fixes segfault due to wrong use of portid while accessing array Change-Id: I1e8b57c27e7c26918bd61cb1d72dbe88ab269c98 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-06-01Merge "[SAMPLEVNF] Adding support to handle more than 16 ports"Deepak S9-20/+250865
2017-06-01[SAMPLEVNF] Adding support to handle more than 16 portsDeepak S9-20/+250865
This patch extends num_ports vnf can handle ports > 16 . This include changes in the memory allocatiion and size of different paramters Change-Id: Id8907327023ba863ad107bb874cfb60bd38daee5 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-31Merge "acl_lib: remove unused dualstack code from acl library"Deepak S2-379/+0
2017-05-31Merge "vFW: remove unused dualstack support code"Deepak S1-660/+1
2017-05-31Merge "vFW: Clear the pkt drop count for unsupported type in clearstats cmd"Deepak S1-0/+1
2017-05-30If port configuration fails. Try again after disabling TX OFFLOADDeepak S3-9/+25
Change-Id: I5eaf64a0cac8747ba5ac79bfd036a77cee766e39 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-30[SAMPLEVNF] Adding UDP Replay VNFVishwesh M Rudramuni12-15/+3724
JIRA: SAMPLEVNF-8 This code adds support for UDP Replay which acts as a reflector of all the UDP packets on the requested port. Change-Id: If8330580f58c785736e578e815d15d983ce20209 Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com> Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-18Adding http proxy setup for non-intractive buildDeepak S1-0/+12
Change-Id: I9a3137f60b83c88b16027a9e6c404ccc3673b820 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-18Adding support to build the vnfs without user interventionDeepak S1-0/+24
./tools/vnf_build.sh --silient Change-Id: I50ecdc263a732d1ed823202107e49ffaa739e9b4 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-12Change PMD link down to warning instead of panic errorDeepak S1-1/+1
On SRIOV/OVS, NIC interface link always be UP. But to set the IP, we need to bring down the interface. This patch allows the program to continue after printing warning. Change-Id: I79212f4d71501af5f3065143e067a22855a5fde6 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-12acl_lib: remove unused dualstack code from acl libraryAnand B Jyoti2-379/+0
JIRA: SAMPLEVNF-14 The simultaneous IPV4 and IPV6 traffic is not required/supported. The IPv4 and IPv6 separation is done to avoid multiple checks between v4 and v6 and to improve the throughput performance. Remove this in-used/unsupported code from the acl library code. Change-Id: I4b5c562e541b1616279f0332d8b837c44b7e865d Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-05-12vFW: remove unused dualstack support codeAnand B Jyoti1-660/+1
JIRA: SAMPLEVNF-14 The simultaneous IPV4 and IPV6 traffic is not required/supported. The IPv4 and IPv6 separation is done to avoid multiple checks between v4 and v6 and to improve the throughput performance. This patch removes this unused/unsupported code from the vFW. Change-Id: Iefea5a6ed8c9454be9807eb1796908aec7bfc199 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-05-12vFW: Clear the pkt drop count for unsupported type in clearstats cmdAnand B Jyoti1-0/+1
JIRA: SAMPLEVNF-13 The packets drop counter of unsupported type was not cleared during clearstats command of the vFW. This patch adds the fix to clear the pkt_drop_unsupported_type at the clearstats cmd. Change-Id: I07d2c85a288efbc5e1fa6cee84c2ffe12e9673f4 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com>
2017-05-11Allow enable/disable of checksum for cgnaptDeepak S2-19/+19
JIRA: SAMPLEVNF-11 Enable Checksum in makefile add CHECKSUM_REQ --> hw_checksum_req=1 in config for hw_checksum --> hw_checksum_req=0 in config for sw_checksum disable checksum in makefile comment CHECKSUM_REQ Change-Id: I5ebcfe845082ea49acaa13bc963fc07b92b90650 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-05-11Default enable only NAPT featuresDeepak S1-5/+5
JIRA: SAMPLEVNF-11 By Default CGNAPT will have only NAPT feature. To enable other advance feature, Uncomment same in Makefile - PCP - SIP_ALG - CT_CGNAT - FTP_ALG Change-Id: I8602726e6db8a899a94028f7bc16d6e7339438b9 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-21BUGFix: Allow the vCGNAPT compile without FTP/SIP functionalityDeepak S1-1/+4
JIRA: SAMPLEVNF-7 Change-Id: Ia5d0729cc3959b9b4cf1e0cb356758adf83e5d83 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-21BugFix: Correct the path while checking for dpdk installation folder.Deepak S1-1/+1
JIRA: SAMPLEVNF-6 Change-Id: Ifa4fcee4cca3a62873b16a2009de93b7c138b179 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-19vFW: Adding Virtual Firewall VNFAnand B Jyoti35-1/+12953
JIRA: SAMPLEVNF-4 vFW supports following features: - Basic packet filtering (malformed packets, IP fragments) - Connection tracking for TCP and UDP - Access Control List for rule based policy enforcement - SYN-flood protection via Synproxy* for TCP - UDP, TCP and ICMP protocol pass-through - CLI based enable/disable connection tracking, synproxy, basic packet filtering - Hardware and Software Load Balancing - L2L3 stack support for ARP/ICMP handling - Multithread support - Multiple physical port support Change-Id: I96d28858488ed8764370d161975bc1e0557c8b20 Signed-off-by: Anand B Jyoti <anand.b.jyoti@intel.com> [Push patch to gerrit] Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-19vACL VNF initial check-inBindya Narayan19-1/+10472
JIRA: SAMPLEVNF-2 Features include: - CLI based Run-time rule configuration. (Add, Delete, List, Display, Clear, Modify) - Ipv4 and ipv6 standard 5 tuple packet Selector support. - Multithread support - Multiple physical port support Change-Id: Ie266be23cd2d81f6d01df508ba44bd0998be13b3 Signed-off-by: Bindya Narayan <bindya.narayan@intel.com> [Push patch to gerrit] Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-19vCGNAPT VNF initial check-inDeepak S48-0/+20568
JIRA: SAMPLEVNF-5 The vCGNAPT implementation contains following features: • Static and dynamic Network address translation. • Static and dynamic Network address and port translation • ARP (request, response, gratuitous) • ICMP (terminal echo, echo response, pass-through) • ICMPv6 and ND • UDP, TCP and ICMP protocol pass-through • Multithread support and Multiple physical port support • Limiting max ports per client • Limiting max clients per public IP address • Live Session tracking to NAT flow • NAT64 – connectivity between IPv6 access network to IPv4 data • PCP - Port Control protocol • SIP functionality • FTP functionality Change-Id: I5ebb44ae60e32dd6da5e793efd91a6831a4d30a7 Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-19Adding script to auto build VNFsDeepak S9-0/+1101
Change-Id: I5af3301dceacb57499b92c543b912ed21f8b253d Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-18common: Adding common library for sample vnfVishwesh M Rudramuni78-0/+42324
JIRA: SAMPLEVNF-3 This patch adds common libraries required as part of the sample vnf. This includes the following libraries 1. ACL library 2. SIP 3. FTP 4. Connection tracker 5. L2l3 stack - Interface Manager - ARP & ICMPv4 - ND & ICMPv6 and other common libraries needed for ip pipeline framework Change-Id: I117690b6b63fbcd76974cd7274518484e60980ab Signed-off-by: Vishwesh M Rudramuni <vishwesh.m.rudramuni@intel.com> [Push patch to gerrit] Signed-off-by: Deepak S <deepak.s@linux.intel.com>
2017-04-18Adding INFO and LICENSE for reviewagardner3-0/+36
Change-Id: If7ea70d202cda197db9f4913148e6a0f2e94e3bb Signed-off-by: agardner <agardner@linuxfoundation.org>
2017-03-28Initial empty repositoryAric Gardner0-0/+0