summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-01-29Added support for DPDK 19.08Xavier Simonart7-12/+61
Change-Id: I090bf8f1cd5a5d2dfa4f336bc66c46cc03d6c5bb Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2020-01-29Prepare for DPDK 19.08 supportXavier Simonart63-571/+609
This commit prepares PROX for supporting changes from DPDK 19.08 Mainly, the "sed" listed below were run. In addition, - some forward definition have been removed, - prox_compat.h has been updated - prox_compat.h has been included where necessary. Hence such a commit is rather easy to review and to reapply on other branches if necessary. sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.h sed -i 's/struct ether_hdr/prox_rte_ether_hdr/g' *.c sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.c sed -i 's/struct ether_addr/prox_rte_ether_addr/g' *.h sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.c sed -i 's/prox_rte_ether_addr_port/struct ether_addr_port/g' *.h sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.c sed -i 's/struct vlan_hdr/prox_rte_vlan_hdr/g' *.h sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.h sed -i 's/struct ipv4_hdr/prox_rte_ipv4_hdr/g' *.c sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.c sed -i 's/struct ipv6_hdr/prox_rte_ipv6_hdr/g' *.h sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.c sed -i 's/struct udp_hdr/prox_rte_udp_hdr/g' *.h sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.c sed -i 's/struct tcp_hdr/prox_rte_tcp_hdr/g' *.h sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.c sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h sed -i 's/struct prox_rte_ether_addr_copy/prox_rte_ether_addr_copy/g' *.c sed -i 's/struct prox_rte_ether_addr_copy/ether_addr_copy/g' *.h sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.h sed -i 's/prox_rte_ether_addr_copy/ether_addr_copy/g' *.c sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.c sed -i 's/ether_addr_copy/prox_rte_ether_addr_copy/g' *.h sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.h sed -i 's/prox_rte_ether_hdr_arp/struct ether_hdr_arp/g' *.c sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.h sed -i 's/struct vxlan_gpe_hdr/prox_rte_vxlan_gpe_hdr/g' *.c sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.c sed -i 's/eth_random_addr/prox_rte_eth_random_addr/g' *.h sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.c sed -i 's/ETHER_CRC_LEN/PROX_RTE_ETHER_CRC_LEN/g' *.h sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.c sed -i 's/ETHER_HDR_LEN/PROX_RTE_ETHER_HDR_LEN/g' *.h sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.c sed -i 's/ETHER_MAX_LEN/PROX_RTE_ETHER_MAX_LEN/g' *.h sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.c sed -i 's/ETHER_MIN_LEN/PROX_RTE_ETHER_MIN_LEN/g' *.h sed -i 's/TCP_SYN_FLAG/PROX_RTE_TCP_SYN_FLAG/g' *.c sed -i 's/TCP_RST_FLAG/PROX_RTE_TCP_RST_FLAG/g' *.c sed -i 's/TCP_FIN_FLAG/PROX_RTE_TCP_FIN_FLAG/g' *.c sed -i 's/TCP_ACK_FLAG/PROX_RTE_TCP_ACK_FLAG/g' *.c Change-Id: I4dfe8be68e618c94dcaae28754579fbeb571bb00 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-12-02Remove UUIDs in centos.jsonLuc Provoost2-13/+12
Removed the remaining UUIDs from the centos.json file, making it easier to reuse this file. This does require a recent version of the packer tool. Updated the README accordingly and also added the --env option in the packer alias, so that the OS_CLOUD variable is set when running packer in the container. Updated rapid.vms with the security group name used in the centos.json file. Change-Id: I4f6815a3250811e336c14857e0ec5e7793a77acf Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-12-02Fix mempool size for swap.cfgLuc Provoost2-2/+2
Fixing an error re-introduced in the swap.cfg file. The mempool size needs to be bigger than the number of rx and tx descriptors (we need some extra buffers in the mempool for other things than rx and tx descriptors). The default number of tx and rx descriptors has been changed in PROX to 2K. This initially went through the testing since this is just giving a warning in the prox.log file for some PMDs. For other PMDs, PROX will not start. Also fixed an inconsistency in rapid.vms: name of the security group. Change-Id: If95677bd6169a16da1b3b2a56d13936a854c385e Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-11-26rapid november release combining changesLuc Provoost23-316/+473
-Renamed monitorswap.test into corestats.test. This is a more generic test case that can monitor the core statistics of all PROX instances -New portstats.test which can monitor the port statistics of all PROX instances -Removed the tasks parameter in the [DEFAULT] section of the *.test files. Runrapid.py is now scaning the PROX configuration files to automatically detect the PROX tasks that are being used. -There is now an option to add the PushGateway parameter in the [Default] section of some *.test files. This will push the measurements to the Gateway, so they can be used by tools like Grafana. The logging of the data in a csv file has also been improved. Results can now be found on the screen, in the RUN*.log files, in the *.csv files and are being pushed to the PushGateway. -In the *.test files, replaced the swapcores, irqcores and impaircores by the cores parameter since they are not treated differently by the code. For a generator, we are still using the gencores and latcores parameters since we need to treat them differently in runrapid.py -devbind.sh is removed from the repository since this file is now created by runrapid.py -renamed the rapidVMs.vms file into rapid.vms -image is now built without ssh access for root. Only using centos user. runrapid.py is now using centos user for ssh sessions. PROX tools are strted using sudo -using new DPDK, mb_lib and PROX versions as defined in deploycentostools.sh -installing missing yum-utils package in image -added flowsize parameter to the impairtest -added list of flowsizes to the fixed_rate testing (l3framerate.test) -the irqtest can now loop through multiple Test Machines in stead of only checking the irq of one. Note that we should have the same cores parameter for all Test machines -changes in prox_ctrl.py to support setting the speed of a generator on a combination of mulitple cores and tasks. Also added the multi_port_stats function to support the new portstats.test -Updated version to 19.11.21 -Fixed some power of 2 in the flow table Change-Id: Ia14543bf3195a2b1bd4184b455da6940f1777fc9 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-11-25Update RAPID readme about packer detailsIllia Polliul2-8/+34
Change-Id: Ieff72073fff06818a5c5bc8fb9116461c95c2901 Signed-off-by: Illia Polliul <ipolliul@juniper.net>
2019-10-23Added support for DPDK 19.05 / IPSecXavier Simonart3-28/+52
Note that since 6073b359 (April 2018) IPsec PROX support requires at least DPDK 17.11. Hence README has been updated. Change-Id: I34b7a968c16db5c3a3fc7bb6af111fdb49ad6b91 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-21Fix two strncpy issues introduced by fb0c44a8Xavier Simonart2-2/+2
Change-Id: Ic452b22dc2522a1b49e3091cb25f2784bc505b41 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-17Update PROX version to (preprod) 1905 to reflect DPDK 19.05 supportXavier Simonart2-3/+3
Change-Id: I7ae7d9f2f5f3058df032062e0b2f6e3207086930 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-17Merge "Increase the default number of rx and tx descriptors to 2K"Xavier Simonart12-17/+38
2019-10-17Fix support for old DPDK (such as 16.04)Xavier Simonart1-0/+6
When support for DPDK 18.05 was added it prevented supporting some much older DPDK such as 16.04. This has been fixed. Change-Id: Idd7ddd7e485c54c41def0540b8c126c097a05941 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-13Increase the default number of rx and tx descriptors to 2KXavier Simonart12-17/+38
A high number of RX descriptor can be helpful in avoiding packet loss due to the core being interrupted. This commit increases the default number of descriptors from 256 to 2K. Those values are checked versus the minimum and maximum supported by the pmd. Number of mbufs (mempool size) have been updated n config files to support this default number of dsescriptors. The number of descriptors can still be overwritten by the config file. However those values must always remain within the limits reported by the pmd. Change-Id: I5f7999eca886dad68f3c0733da0d796bf4c06a56 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-13Disable TX checksum offload in some virtio casesXavier Simonart1-0/+7
Some OVS versions reports that they support UDP offload and no IPv4 offload, but fails when UDP offload is enabled. Hence, now, when virtio reports that it supports UDP checksum and no IPV4 checksum offload, we disable UDP checksum offload. Change-Id: I4f22f6be4d97b0aedf267ebeaa498c0dacef3317 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-11Merge "Fix generation through pcap file"Xavier Simonart4-25/+26
2019-10-11Fix generation through pcap fileXavier Simonart4-25/+26
- When using "pcap file" argument in PROX config file in the gen mode (and no submode), packets were truncated to 8 bytes (and a warning printed) This has been fixed. - "Set value" command was checking whether offset was within first 1518 bytes unrespective to the mtu (e.g. jumbo packets). This has been fixed. - There was a limit of 64K packets loaded from a pcap file (which could be overwritten through PROX config). This limit has been removed - by default all packets from pcap are loaded - When pcap was loaded, memory was allocated to store the packet. However just enough memory was allocated, so that there was no way to change (increase) packet size through command line after that. Now memory is allocated to store up to mtu size - While "set value" command was acting on all packets, "pkt size" command was only changing the first packet. This has now been changed and both commands change all the packets. - A few other minor cleanups. Change-Id: I7264cee8d57e3e6a405dfd7e7a52a95b99399d99 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-11Fix port throughput related statistics for i40e virtual functionsXavier Simonart1-3/+3
When CRC stripping is enabled (default PROX behavior), the number of rx bytes received by the NIC returned by DPDK usually does not take the CRC 4 bytes into account. However, for i40e virtual functions those 4 bytes are counted as part of the received bytes. This resulted in both DPDK and PROX taking those 4 bytes into account causing the RX % to be above 100%. Change-Id: I59883b638ed67a6778f80c4dd6bfbfc4f9f2f528 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-10Update PROX to CRC STRIP default bahavior change in DPDKXavier Simonart6-3/+60
Change-Id: I7c3e2981692d823c86787b77d61190327d6448e4 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-09Fix strncpy issue introduced by fb0c44a8Xavier Simonart1-1/+4
Change-Id: I833d753bd5c426d50c0c9fdee5668f3b9fff13b9 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-09Add support for igmp and multicastXavier Simonart15-70/+543
Multicast can be enabled through configuration or through command line - Through configuration Add multicast=mcast_address (e.g. multicast=01:00:5e:01:02:03) in the port section - Through command line run enable multicast port_id mcast_address (e.g. enable multicast 1 01:00:5e:01:02:03) IGMP join message is sent unsollicited through command line: join igmp core_id task_id ip (e.g. join igmp 1 0 224.1.1.3) To enable swap answering IGMP Query (w/ IGMP Join) - Through configuration Add igmp ipv4=ip_address within the core/task section - Through command line join igmp core_id task_id ip (e.g. join igmp 1 0 224.1.1.3) (this will 1st initiate an unsollicated join, then answer any subsequent query) UDP/TCP packets received on a multicast address (224.0.0.0 => 239.255.255.255) are discarded To stop sending responses to IGMP query: leave igmp core_id task_id Change-Id: I3808ccabf3b38b5a1e10e1b044db63aa05bcd7b5 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-09Added support for DPDK 19.02 and 19.05Xavier Simonart14-27/+136
This includes supporting following API changes - RTE_VER_... now in rte_config.h instead of rte_version.h - <rte_ethdev.h> now seems required by <rte_eth_ctrl.h> - rte_sched_port_pkt_write takes extra argument - rte_sched_port_pkt_read_tree_path takes extra argument - enum rte_meter_color replaced by rte_color The extra argument, sched_port, is initialized based on qos_conf parameters. Modes such as qinq_encap4 uses sched_port when doing classification, but does not set qos_conf params. It inherits the sched_port from QoS Change-Id: If8312918241e7d482161a7538f53faac6c303e86 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-09Fix parsing parameter errors in start and stop commandsXavier Simonart2-2/+25
Some wrong parameters in start (such as "start all 4" while there are only less than 4 tasks available on some cores) and stop command could have potentially caused a crash in some cases. Change-Id: I6dc201575b574c53ded242ea795c35de82fb787e Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-08Fix compatibility with GCC 6 and earlierXavier Simonart3-3/+4
fb0c44a fixed compilation on GCC 8 by using: 1) #pragma GCC diagnostic ignored "-Wstringop-truncation" 2) __attribute__ ((fallthrough)); However, -Wstringop-truncation has only been introduced in GCC 8 and __attribute__ ((fallthrough)) has only been introduced in GCC 7. Hence they caused Warnings/Errors on earlier versions. Comments about fallthough (see https://developers.redhat.com/blog/2017/03/10/wimplicit-fallthrough-in-gcc-7/) can be used on GCC 8 to prevent fall through warnings Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Change-Id: I6f22e023191bbf22d8b01f1812061795a6494134
2019-10-08Fix setting mac address through [port] sectionXavier Simonart1-0/+3
MAC address can be configured through the [port] section. However this had only some effect on packets being transmitted. For instance it was used to set the src mac address by the generator. It had no effect on packets reception: when not in promiscuous mode only the packets with the MAC originally set by the HW were received. Now, when not in promiscuous mode, only packets with MAC as defined in [port] section will be received. Change-Id: I064817bf6727d098e89fbbb7a90412ed599f0fb6 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-08Fix setting rx and tx queue stats mappingXavier Simonart1-1/+3
rx_queue_stats_mapping and tx_queue_stats_mapping were called unrespective of the number of active queues, and failing on all unactive queues. this caused lot of errros in prox.log Change-Id: I15ecb7adfb562caff8efb0eb24c341a3ba354571 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-10-08Fix display error with repeated characters (ncurses/xterm related issue)Xavier Simonart1-1/+36
On recent OSes such as RHEL 8.0, ncurses(6.1) introduced support for ECMA-48 repeat character control. Some terminal emulators use TERM=xterm but do not support this feature. In this case, printing repeated character such as "22000000 Hz" might be displayed as 220 Hz. Other emulators, such as tmux, use TERM=screen, and do not exhibit the issue. Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Change-Id: I79977c7421699b59957d6cbd8aa954f06f3e0227
2019-10-08Support for recent GCC compilerXavier Simonart16-42/+68
This is required for instance on gcc (GCC) 8.2.1 20180905 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Change-Id: Id86de5d39d77c5cbf168cc51434f436f84376a4c
2019-09-04Add heartbeat support (stop all cores in case of TCP socket issues)Xavier Simonart5-0/+37
"heartbeat timeout" (in second) can be specified as a global parameter in PROX config file. If set, a timer is started when the first command is received from the TCP socket. This timer is reset at each commands received through the TCP socket. If the timer expires, then - all cores are stopped - the TCP socket is closed, causing an error at client side. This feature helps in case a script starts PROX and the traffic generated through PROX causes issues to the control plane. Change-Id: I900f22fa091786a564f6b7d846f5abc2c5cbcc58 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-08-28Merge "Add option to change scheduler policy to SCHED_RR and increase ↵Xavier Simonart3-0/+28
scheduler priority"
2019-08-28Add warning in case of wrong configuration (missing l3 submode)Xavier Simonart1-0/+2
Add warning if gateway_ip is configured and l3 is not configured. If l3 sub mode is not configured, then gateway_ip parameter is ignored (an error is not returned to make it easy to switch from an l3 sub mode to default submode). Change-Id: Ica4a522b037a024dd54bf616d32d69e29d5b8b92 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-08-28Add option to change scheduler policy to SCHED_RR and increase scheduler ↵Xavier Simonart3-0/+28
priority Set "realtime scheduling=yes" option to change Linux scheduler policy to SCHED_RR and increase the priority to the maximum possible for the policy. Change-Id: I3ecef5cbc3816cf2b56364bb4e806ae5ac093c23 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-08-05Fix reset valueXavier Simonart1-4/+11
In addition to resetting all values set by the user, reset value was also resetting internal configuration. It resulted that the src mac address in the outgoing packet was set to whatever was specified in pkt inline, which is wrong (by default src mac address should be set the the port mac address). Note that reset value reset any "set values" but does not reset the packet size. Change-Id: I9d1cd92be9f5814bd7b104932dd6ffe5df3b6edd Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-07-05Merge changes from topic 'june_release'Patrice Buriez27-762/+913
* changes: Some fixes after code review Cosmetic change when printing warnings Multiple changes for June release
2019-07-05Some fixes after code reviewLuc Provoost25-91/+92
Taking into account comments from Patrice and Xavier Change-Id: Ifdabd1945e074c9ee97b059956f107901392c020 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-07-04Fix keyboard related issues on Ubuntu 18.04Xavier Simonart2-1/+34
On Ubuntu 18.04, the keyboard was not properly handled in PROX For instance, many keys pressed were silently discarded. The issue is related to a change in histedit/libedit version. Recent libedit have (silently) changed the prototype of the get_char function passed in el_set(el, EL_GETCFN, get_char), with some input parameters changing from char to wchar_t. As PROX used the old prototype (char based), this resulted in some uninitialized field (= garbage) in the wchar_t, causing libedit to discard the character. PROX now uses different get_char prototypes, depending of the libedit version being used. If PROX was already compiled and a the OS is updated (e.g. from Ubuntu 16.04 to Ubuntu 18.04), this will require a 'make clean'. Change-Id: Icb0e555a21e13cdaf98172bad17f2f838fb7bc3a Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-07-01Cosmetic change when printing warningsProvoost1-1/+3
Warnings can be printed in the following cases: - When not enough packets are taken into account for measuring packet latency accuracy. - When there us a potential network throughput issue, meaning the generator is generating more packets than the the NIC can handle - When the generator cannot generate the requested load If there are no warnings for a certain measurement, nothing gets printed, suppressing an empty line Change-Id: Iee07c12142e28dcc0ac406bfed7626731ab08f98 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-06-30Multiple changes for June releaseLuc Provoost25-713/+861
- Change inittest in warmuptest. This has now a warmuptime, warmupspeed, packet size and flow size. - Change in centos.json. This will now also copy deploycentostools.sh during image building so that it can be used to re-compile prox in the VM by typing "./deploycentostools.sh compile" - runrapid.py parameters needing a file name, need to be complete file names: no extensions will be added any more by the scripts. - Changes in createrapid.py to handel the openstack CLI output in a simpler way. - The management interface of the VMs can now also be an SRIOV interface. We have now an extra optional parameter in the VM sections of the rapiVMs.vms file: SRIOV_mgmt_port - Changed the name of some sections and keys in the environment file since runrapid.py will not always communicate to OpenStack VMs. This could be containers or any other (virtual) machine. - The previous MachineMap.cfg has been renamed to machine.map - A new test has been added: monitorswap is just showing the statistics of a swap (virtual) machine, without generating any packets. This is useful in situations where an external tester is used. - Latency and core statistics can now be measured even if there are multiple PROX cores and tasks running. A new parameter has been added in the test files with following default value: tasks=[0]. During the collection of statistics, all tasks in this list will be queried. It is ok to have a non-existing task in such a query since it will be ignored. - A --screenlog parameter was added for runrapid.py allowing for more detailed output on the screen during debugging. No need to check the log file. - Previous tests to run multiple packet size with a given flow size and to run multiple flow size, with a given packet size are now combined by specifiying 2 lists: packetsizes & flows - The screen output of this test has also been reworked with more meaningful column names and the test result is now in the field "core received". This allows also for faster termination of the test: When the all packets sent by Gen NIC are received by the cores within the thresholds for packet loss and latency, the test is now stopped, even we were requesting more packets to be sent. Change-Id: I3307e7a972f2140e739f376f146fe875df0303e6 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-06-28Change of openstackrapid directory nameLuc Provoost27-0/+0
The scripts are orrignally written to support an OpenStack deployment. We are now making changes to support container environments, hence renaming the directory to rapid. Change-Id: Icaa2fad83c6da451eee733934151e98e9cd07de4 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2019-06-27Fix "code nested too deep error" introduced by commit 843ca042Xavier Simonart1-44/+46
Change-Id: Ifb55091feedb28ffc5947ffe61e6f6a5ce034459 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-06-14Increase window size for latency accuracyXavier Simonart3-15/+19
Accuracy of latency is obtained by writing TX accuracy for packet N in a later packet i.e. packet N + WINDOW. If this window is too small, packet N + WINDOW (conveying accuracy for packet N) might arrive before packet N, resulting in no accuracy for packet N. This change increases this window from 64 to 8K packets. This change should result in a higher number of packets used for latency measurements when packets are reordered. This change might have a performance impact as it uses more memory. Change-Id: I1016fddb66af86605c73a24050238da41cf54152 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2019-06-14Add support for latency task with multiple portsXavier Simonart2-4/+17
Change-Id: Iaae603a7558666b5794ec4c76f447eb3260a1df9 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2019-06-14Support multiple tasks in "lat stats" commandXavier Simonart1-9/+38
Similar support and comments as for "dp core stats" command Change-Id: I215fc57c292fbc1f12a3fe95d40a0a80c29b714a Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2019-06-14Support multiple tasks in "dp core stats" commandXavier Simonart2-10/+31
The "dp core stats" command supported, as other commands, multiple cores but not multiple tasks. It now supports both (e.g. dp core stats 1-2 0-1). This is necessary so that users can collect all statistics from PROX in one command line. It will return similar information on the screen or through the socket: - if the syntax is wrong (e.g. missing task, too many cores or tasks, ...) => an error message is printed on the screen, and the single error line "error: invalid syntax" is returned through the socket - if the syntax is correct => one line is printed or returned for each core/task pair => if the core/task pair is invalid, the line reports an error => otherwise, the line provides dataplane statistics for the core/task pair, with the core_id and task_id added, either at the end of the line returned through the socket, or at the beginning of the line printed on the screen. This means a change in behaviour when using the socket: before, when an error happened (e.g. bad task), then nothing was returned which made it difficult for the script to catch the syntax error. Similar behaviour could/should be implemented for other commands. However, care must be taken as some scripts like NSB might count the number of lines within the output, or the number of items within the line. This should not be an issue for dp core stats as NSB does not use it, and other PROX scripts do not count the number of items and will be adjusted to count the number of lines. Change-Id: I582a671ae3d2f6493f791e80fc28e70f8e3a38d1 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2019-06-14Add parse_cores_tasks()Patrice Buriez1-32/+55
and rename parse_core_task() to parse_cores_task() Change-Id: I256dfb8d02520a70d65d6623feddcc9037938501 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2019-06-14Add "total TX fail" count to "dp core stats" command outputPatrice Buriez3-4/+11
Warning: This change breaks backward-compatibility of PROX socket scripting API, because the "total TX fail" count is reported before the "last TSC" field. As a result, PROX scripts that make use of the "dp core stats" command, such as the core_stats() method in helper-scripts/openstackrapid/prox_ctrl.py, MUST be reworked to correctly parse the returned set of fields. Change-Id: I3fe7f37dccee19f5f0b2719f262c6cfa7bad850f Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2019-06-14Simplify cores_task_are_valid()Patrice Buriez1-12/+1
by means of calling core_task_is_valid() Change-Id: Ice64aabc84066633288ff43d4dc9af3f5b378e33 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2019-06-11Fix soft checksum calculationXavier Simonart1-1/+11
Soft CRC was wrong in some cases, such as when compiled with gcc -O2 This might have caused the checksum to be set to 0 in those cases. Change-Id: Idf01df92876bd2a152ad028293b67a31861a0dfc Signed-off-by: Xavier Simonart <xavier.simonart@intel.com> Signed-off-by: Patrice Buriez <patrice.buriez@intel.com>
2019-04-19Merge "PROX: update version"Deepak S3-11/+11
2019-04-15PROX: update versionstable/hunterXavier Simonart3-11/+11
PROX version was not udpated since a long time, resulting in difficulty to easily understand which version is being run. Improved solution should be to support sha1. Change-Id: I9d68bd64f52f32544d31d2b8c6bcd0c55c7c228c Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-04-15PROX: fix minimum rx buffer size used within generatorXavier Simonart1-0/+3
Different PMD have different requirements for minimum rx buffer size. vmxnet3 has (in DPDK 18.08) requires minimum 1518 + 128 (RTE_PKTMBUF_HEADROOM). Change-Id: I327ae5b8dcf7eef8dd71fb4e2f0603b9bab6e1d3 Signed-off-by: Xavier Simonart <xavier.simonart@intel.com>
2019-04-12Improved image building & new PROXLuc Provoost25-551/+764
Bug fixes for the script for building an image via the packer tool. This also installs a newer version of PROX with some bug fixes in PROX. The *.test files have been simplified. Also introduced a new file MachineMap.cfg to map test machines on actual VMs. Change-Id: I69445327ef0a907bc8c1566aaa60c733418c541e Signed-off-by: Luc Provoost <luc.provoost@intel.com>