summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-05-10Reinstate installation of igb_uioLuc Provoost3-2/+12
For good performance on some platforms, we need the igb_uio driver. With this change, the driver is compiled and insmod done during boot time. When running the rapid scripts, the devbind.sh script is sent to the instances (after replacing the string "MACADDRESS"). Make sure you uncomment the proper line to chose which driver you want to use. Change-Id: I69549400a97f29e06add6ab44515e96ffa9ce0e8 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-05-10Fixing rapidxt for XtestingLuc Provoost5-4/+25
Changes were needed for installing the python rapid python package by adding 2 new files: pyproject.toml & setup.cfg. Also fixed a bug in rapidxt.py Change-Id: Iac98b6068afef4a5f1a97459ea1109211607d53d Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-05-05New test case: gen versus swap via gatewayLuc Provoost4-10/+134
A new test was added: tests/basicrapid_gw.test. Traffic generated will now go to the reflector (swap instance) via the Gateway. The swap instance will also send the traffic back via the gateway. This use case is created to support GCP testing where the interfaces are defined with a /32 netmask, and hence all traffic is routed via the gateway. Change-Id: I60142d650072ab345cd47a0f32cb6a8275da0542 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-30Do not run after_boot.sh by defaultLuc Provoost1-10/+12
In the definition of the stack in openstack-rapid.yaml, we define a CloudConfig resource. after_boot.sh is called automatically by a service (check-prox-system-setup.service), after each boot. In this file, defined in the CloudConfig resource, you can put instructions needed for succesful operation and to fix certain issues in your environment. By default, this file should NOT be executed, hence we should not have this in the CloudConfig. Change the name back to after_boot.sh if you need to execute this code. Change-Id: Ifd3f86fe6dfd31444b799833d6b435a310708f25 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-29Fix the qcow2 disk image contentLuc Provoost2-24/+11
When building the qcow2 image, we are not automatically getting the latest version of the samplevnf code. Since this might have to do with caches, a parameter with the workspace directory is now passed to disk-image-create using the --image-cache option. Also removed verify-image.sh since this is done using build-image.sh with the -v option. Change-Id: I661c543102258929bdfe53af6c6ea0ff72eab33d Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-28Default use of rapid_rsa_keyLuc Provoost6-23/+35
A secret and public key pair is available in the rapid directory: rapid_rsa_key and rapid_rsa_key.pub. createrapid.py is now modified to upload this key into OpenStack if the keypair does not already exist in OpenStack. Which keypair to use is now only defined in params_rapid.yaml. You can still define a key pair with a different name in params_rapid.yaml. If the secret and public key files are not available, a new keypair will be created and the secret key file will be saved. The name of the secret key file is the name as the OpenStack keypair name. The name of the public file is the same, with the pub extension. Change-Id: Ib8b5e4bf3a3d3138216698dc588a6908248220c0 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-22Fix error in sut throughput measurementLuc Provoost1-1/+1
In the fomula to calculate the sut throughput measurement, we used the frequency of the wrong machine: the generator. This issue showed up when testing with generator and sut on a different type of compute node, with different processor frequency. Change-Id: Ib42bb8a30924d6bc6bb2773aed5dcc9145bb50fc Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-20Fix reorder count after resetXavier Simonart1-0/+1
Signed-off-by: Xavier Simonart <simonartxavier@gmail.com> Change-Id: I93bc98069bf60d8b727fd877bf89087c57ad2dd9
2021-04-16Fix spurious discarded packets in CGNat.Xavier Simonart1-1/+1
CGNat was discarding packets in some cases. Some run were fine, others were seeing many packets discarded. Signed-off-by: Xavier Simonart <simonartxavier@gmail.com> Change-Id: I63b2df993e31443bc4b5168611fcdcfa454e2137
2021-04-16Adding documentation in the test filesLuc Provoost16-15/+239
a README file in the tests subdirectory is now describing the parameters used in the test description files. Each test files has a comment pointing to the README file for more information. Change-Id: I49b9b3e1fac0a65c43e7f2d7dc90612923e28f78 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-15Rework of statistics reportingLuc Provoost28-200/+305
- Cleanup of the format.yaml file. - Adding of the packet mis-ordering statistics - Added a warmup phase to get the correct mis-ordering statistics since ARP messages need to be dealt with before we can collect correct misordering stats - Code cleanup avoiding some long lines - Removing background traffic control from rapid_flowsizetest.py since this is already done in the iteration code in rapid_test.py Change-Id: I4c60a90353f27b8e2d0b62505e8f1cd886a17f0a Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-13Fixing the INFO.yamlLuc Provoost1-1/+1
Removing trailing spaces Change-Id: I8d06b7413444843f0bdaa890189929f0e5e2e0f8 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-12Code improvementsLuc Provoost5-280/+268
Rework of some of the code for better readability Change-Id: I559e88faba31d93e593d39cf436f3e114ba4528a Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-08cgnat test case addedLuc Provoost6-20/+346
A cgnat test can now be executed. This test needs 3 PROX instances. The first one, the generator needs to have an interface on the private dataplane network. The second instance, the cgnat needs to have it's first dataplane interface on the private network, while the second data plane needs to be on the public network. The third instance will be playing the role of internet server that the generator is connecting to. It will have one dataplane interface on the public network. This third instance will increase the packet size of the received packets by padding it with zeros and it will send the packets back to the cgnat mutliple times. How many times is defined by a multiplier in the cgnat.cfg file. In that cgnat file, we also define a range of IP addresses that will be used for the dynamic source IP NAT-ing. Make sure that the ports are allowed to accept other IP addresses than their own (e.g. allowed address pairs) and that the range of IP addresses is not overlapping with other machines in the public network. Change-Id: Ibc1c8513ac4e8a304378814fceb28c090dff895f Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-07Log ssh & scp related issues also on screenLuc Provoost1-10/+3
When scripts are doing an ssh or scp to the PROX instances, errors were sometimes hidden. E.g. when we try to upload a config file to the PROX instance that is already existing but owned by another user, we would not see the error on the screen. Note this will only happen if you build your own image. In case you use the pre-canned PROX images, this should not cause issues. Change-Id: I94176b737cd548c93afc71450a85910d7eca2b0c Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-06Avoid seg fault in rte_hash_lookup_bulkLuc Provoost1-78/+83
In case we receive a NON-IPv4 packet, we discard the packet. However, this made the rte_hash_lookup_bulk crash. Hence the keys parameter has changed to avoid the crash. Change-Id: I093688a0b59d44667a42147fd67fbc7901d6dba4 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-04-06Fix username for committer rightsLuc Provoost1-1/+1
Change-Id: Ie2532fdb6339dc447ae122136088d6a1ca2c80f2 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-03-31Fix ref counter bugLuc Provoost1-1/+1
Fixed the error in the calculation of the rte_pktmbuf_refcnt_update parameter Change-Id: I858d9e0b8cf158f9c24807197df34f69217a1b1c Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-03-29Minor update to fix compilation issues on recent gcc and dpdkXavier Simonart10-17/+17
Fixes compilation issues seen on gcc 9.3.0 on dpdk 20.05. Signed-off-by: Xavier Simonart <simonartxavier@gmail.com> Change-Id: Ib7989c1bac66e82551165ab49e06941ebc772347
2021-03-25Do not request IPV6 routing infoLuc Provoost1-5/+5
PROX is not yet dealing with IPV6 routing info (only IPV4). Hence we got a segmentation fault when receiving such information. In a previous commit, we are checking for IPV4 routing info and we do not continue processing of any other routing information. With this fix, we ask the Linux OS NOT to provide IPV6 routing info. The checks when receiving routing information have changed so that we only treat IPV4 and nothing else. Change-Id: I428a036c31014377c8de08da17e51740be0e1de5 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-03-22Ignoring IPV6 routing messagesLuc Provoost1-0/+4
The code was only written to deal with IPV4 routing messages. If we receive an IPV6 routing message, we are now ignoring that message. Change-Id: I0f8044a0331235639bf5cab9abb9c8ce55c3522d Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-03-16build-image.sh is now taking parameters: -i -gLuc Provoost1-28/+29
The -i option is now specifying the appendix for the the image name. The name of the image will be rapid-<appendix>.qcow2. The -i option could then be used to specify 'latest' or 'stable'. The -g option specifies the google storage url where the qcow2 will be stored. The -v option is still existing in case we want to only verify the qcow2 image creation process. An example: buils-image.sh -g artifacts.opnfv.org/samplevnf/images -i latest -v Change-Id: Ie07a89eff029f4e9fd3e1f2ebff1eaea05c580a6 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-03-15Fix the tuned optimizationsLuc Provoost11-36/+62
tuned-adm is now run through check_prox_system_setup.sh at the first system startup/reboot. This will result in the correct grub cmdline parameters. We are also coying the default rapid_rsa_key in the authorized_keys of the rapid user, which is now the default user to run the tests. Fixed also an issue in handle_mirror.c: using now ETYPE_IPv4. Changed deploycentostools.sh to reflect the changes done when building the image with disk-image-create. Change-Id: I5933d21faef9fe02b56c01d0b96e2c143cc5476d Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-03-10Remove useless site.retry from treeCédric Ollivier1-1/+0
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com> Change-Id: Id2a3fc69d097024cff608103ba7310388a273976
2021-02-25Preparation for packet mis-ordering statsLuc Provoost6-24/+34
Changed PROX and the python scripts so that the "lat all stats" command also returns the mis_ordered, extent and duplicate statistics. In order to make this work properly, we need now to also stop and restart the latency cores, every time we stop and start the generator cores, since the sequence numbers are reinitialised every time we start the generator core. Change-Id: Ic4212a989c8ee9d0f026a34ca63a08b982c32b71 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-02-25change committer email addressLuc Provoost2-4/+4
Changed to Xavier's new email address Change-Id: I3b5a0e00c41abcbca405dbea33a87c56688a5289 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-02-25Fix mbuf corruption when handling icmp messages.Xavier Simonart1-1/+1
Signed-off-by: Xavier Simonart <simonartxavier@gmail.com> Change-Id: I3eeacb550d1ef51a13802d06f06973437afe7d9b
2021-02-19Merge "Bypass the dep management issues in lfdocs-conf"Luc Provoost0-0/+0
2021-02-19qcow2 image file name to include GIT_BRANCHLuc Provoost1-30/+20
The qcow2 file name is now constructed as a combination of rapid-${GIT_BRANCH##*}.qcow2 The image is built and copied every time the job is triggered. In this way we will overwrite rapid-latest.qcow2. Change-Id: I9f9c255dc5207a7595aa9e49ae57bd50b42c4d3b Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-02-18Using disk image builder to create rapid VMLuc Provoost14-0/+369
All files are now availavle to build a qcow2 image using disk image builder. This image is based on centos 7. DPDK and PROX are installed together with some optimizations. Change-Id: I61aa91206ea7f8b3b6a3ff7d490d1804e7e784c8 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-02-17Bypass the dep management issues in lfdocs-confCédric Ollivier1-0/+2
It can only work for python3. Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com> Change-Id: Ie7b2706f9d4dbfbb2cdca85c0543894c79634246
2021-02-11Add support for native Kubernetes CPU Manager0.0.1Yury Kylulin33-21/+132
For Kubernetes environment core ids in the config and test files are relative and automatically remapped to the allowed cores allocated for container. There is no change to the baremetal or VM environment. Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Change-Id: I63e499723e8213de1b05d4175eb3eddc4492ccf5
2021-02-10Improve prefetching in handle_mirrorLuc Provoost1-3/+3
Some of the prefetching code was commented out, which was wrong. The prefetching is back in. Change-Id: Id7e7f09bd62faa7b9faf3d677962a99ba2a71080 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-02-10Expand mirror functionalityLuc Provoost3-24/+67
In order to deal with non-symmetrical load, the mirror function can now change the packet size of each packet it receives. It can also send the incoming packet multiple times on each of the tx ports. To support this feature, 2 new parameters in the cfg file have been added for the mirror mode: - multiplier: specifies how many times a packet needs to be sent on each tx port. Default is 1. - mirror_size: the size of the packets that need to be sent. This will just change (increase) the packet size of each incoming packet. If not specified or invalid value (e.g. <64), the size will not be changed. The packet size will only be changed for IPv4 UDP and IPv4 TCP. Note that these parameters have no effect on the mirror copy submode. Change-Id: Ic46b52abdd80ed51cffee667bd04ade9ec23ff6d Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-02-01Fix the default test fileLuc Provoost1-1/+1
In a previous change, all test files were moved to the tests subdirectory. When not specifying the test file on the command line as a parameter, the default test file is used, as specified in rapid_defaults.py It did not reflect the fact that all test files were moved to this directory. Change-Id: I5c77b75dbdde040d0e30dda2b97e981dff572f2f Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-01-29Add rapid script sources in the imageYury Kylulin2-17/+22
Make image more universal and add rapid scripts for mgmt from the container. Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Change-Id: Ia46a8e147f978dd64bfe6c7b44f7dff92e241855
2021-01-27creation of tests and configs subdirectoriesLuc Provoost40-58/+136
All test files are now in the tests directory. All PROX config files moved to the configs directory. When specifying a test on the runrapid.py command line, you should now also mention the directory: e.g. --test tests/basicrapid.test In these test files, you need now to also include the configs subdirectory when specifying the prox configuration that needs to be used. The --map parameter has also changed. It can still take the file name of the map file, that specifies which PROX instance to use during a test. On top of that, you can now also specify a list of indices of the machines to be used during a test: e.g. --map [1,3]. Change-Id: I887cba59834dd8c903a22bc80959b10da2775398 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2021-01-27Add default SSH keysYury Kylulin2-0/+50
Adding default RSA keys for SSH access. Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Change-Id: Id9552717591a805562f3ed2f840251bd9f6a71c1
2020-12-28Improved PROX cleanup when exitingLuc Provoost23-167/+232
Sending now a 'quit' command to PROX, so that the thread running PROX in an ssh session is now cleaned up correctly. Also fixed a problem with the logging when running the code more than once. We only create handlers now, when they do not yet exist. Updated the rapid version. Also added some more tests in the testcases.yaml for xtesting. At the end of a run, the PROX.log files are copied in the results directory. The success criterium for a test 'pass_threshold' has been removed from the test files and is to be controlled by the xtesting testcases.yaml file. Change-Id: Ifbbb1c91f32c9176f52025d9ae4c495b432a94c9 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-12-10Fix for new config file structureYury Kylulin3-1/+21
Fix subnet configuration for the dataplane interface. Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Change-Id: I612113a86a960284303915d5d003bf67a1b48a72
2020-12-10Moving to python 3 for kubernetes scriptsYury Kylulin4-13/+11
Move to python version 3 in all scripts for kubernetes environment. Streamline file names to match existing libraries. Signed-off-by: Yury Kylulin <yury.kylulin@intel.com> Change-Id: Id875f4240a87ab600b445cb9a7fd97ec1335f88a
2020-12-08Reporting test details for all testsopnfv-10.0.0stable/jermaLuc Provoost8-60/+44
Test details were only implemented in rapid_flowsizetest.py. When executing other tests, an error occured. That is now fixed, although in some cases, None is returned. The format.yaml files defines now alsowhat will be reported in the Xtesting details. Change-Id: I5feae62dcf228664b24451d3fc5dfaaadf7edb5e Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-12-03Final documentation update for Jerma releaseLuc Provoost5-45/+50
Final changes to the documentation Change-Id: Ibefd33feb15efb692b445dd6a025ec3854d2ed5a Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-12-02More documentation updatesLuc Provoost3-2/+217
Added 04-running_the_test.rst describing how to change the default test. This section is describing the parameters the parameters you can use and how to change the Dockerfile and the testcases.yaml file. Change-Id: Ieaa173ebc61dd320659ca6be3d2ce31684298d42 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-11-30Additional documentation fixesLuc Provoost2-48/+0
Fixed some errors causing an invalid rst format. Change-Id: Ide739a48abbd32b5c88b017a74ad7afc406c2c34 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-11-30SampleVNF Jerma documentation updateLuc Provoost2-2/+61
Some more documentation updates for the Jerma release. Change-Id: I0626ae2ac18dd858f6d1e5fa341371aca6ec639d Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-11-23Jerma documentation rewriteLuc Provoost6-306/+190
First step in a rewrite of the sampleVNF documentation whcih is now focused on the TST009 testing using PROX and rapid. Change-Id: Id95cd44831ae7db518ccdf1d8da55890197d2fcb Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-11-19Changing the committers for the sampleVNF projectLuc Provoost2-29/+27
Per TSC decision as documented in https://wiki.opnfv.org/display/meetings/OPNFV+TSC+Meeting+2020-09-29, changing the INFO file with committer info for sampleVNF project. The project is now focusing only on the rapid-PROX based dataplane benchmarking using TST009 spec. Change-Id: I61a6f69b84af9e1e30e071771a1d2e36b833cf84 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-11-18Support for xtestingLuc Provoost12-15/+197
Some files were added to for rapid testing in the xtesting framework Change-Id: Id912789c5007ca8390a67fb5b359296089aa9618 Signed-off-by: Luc Provoost <luc.provoost@intel.com>
2020-11-13Fix for latency reporting and log file handlerLuc Provoost3-5/+5
The latency histogram dat did not contain samples collected during the first measurement of each step. The maximum latency did take the first step into account. As a result, you might see a test run with a maximum latency not showing up in the latency histogram data. This has been fixed by also including the data from the first measurement in the histogram data. In some cases, we also reported the wrong speed from the last unsuccessful step. This is now fixed and we do report the speed from the last successful step. In rapid_log.py, a fix was added to execute the rollover on the file handler of the log file in all cases. In some cases, the file handler with index 0 was not the file handler of the log file. Change-Id: I6c2b16c21dd0ee17d1d14e46c4c544e185324256 Signed-off-by: Luc Provoost <luc.provoost@intel.com>