diff options
Diffstat (limited to 'tools')
| -rwxr-xr-x | tools/samplevnf-img-dpdk-samplevnf-modify | 194 | ||||
| -rwxr-xr-x | tools/ubuntu-server-cloudimg-dpdk-samplevnf-modify.sh | 201 |
2 files changed, 395 insertions, 0 deletions
diff --git a/tools/samplevnf-img-dpdk-samplevnf-modify b/tools/samplevnf-img-dpdk-samplevnf-modify new file mode 100755 index 00000000..a79fb216 --- /dev/null +++ b/tools/samplevnf-img-dpdk-samplevnf-modify @@ -0,0 +1,194 @@ +#!/bin/bash + +# Copyright (c) 2016-2017 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# samplevnf-img-dpdk-nsb-modify - download and modify a Ubuntu cloud image +# +# The actual customization is done by a script passed with an absolute path as +# the only single argument. The command needs to be invoked as sudo +# +# Example invocation: +# samplevnf-img-dpdk-nsb-modify /home/samplevnf/tools/ubuntu-server-cloudimg-nsb-modify.sh +# +# Warning: the script will create files by default in: +# /tmp/workspace/samplevnf +# the files will be owned by root! +# +# TODO: image resize is needed if the base image is too small +# +set -e +set -x + +die() { + echo "error: $1" >&2 + exit 1 +} + +test $# -eq 1 -o $# -eq 2 || die "no image specific script as argument" +test $(id -u) -eq 0 || die "should invoke using sudo" + +cmd=$1 +RELEASE=$2 +test -x $cmd +mountdir="/mnt/samplevnf" +workspace=${WORKSPACE:-"/tmp/workspace/samplevnf"} +host=${HOST:-"cloud-images.ubuntu.com"} +release=${RELEASE:-"xenial"} +boot_mode="disk1" +YARD_IMG_ARCH="amd64" +if [[ "${YARD_IMG_ARCH}" = "arm64" ]]; then + boot_mode="uefi1" +fi + +image_path="${release}/current/${release}-server-cloudimg-${YARD_IMG_ARCH}-${boot_mode}.img" +image_url=${IMAGE_URL:-"https://${host}/${image_path}"} +sha256sums_path="${release}/current/SHA256SUMS" +sha256sums_url=${SHA256SUMS_URL:-"https://${host}/${sha256sums_path}"} + +imgfile="${workspace}/samplevnf-image.img" +raw_imgfile_basename="samplevnf-${release}-server.raw" +raw_imgfile="${workspace}/${raw_imgfile_basename}" +filename=$(basename $image_url) +YARD_IMG_ARCH="amd64" #Neha added this just for testing +apt-get install -y parted + +# download and checksum base image, conditionally if local copy is outdated +download() { + test -d $workspace || mkdir -p $workspace + cd $workspace + rm -f SHA256SUMS # always download the checksum file to a detect stale image + wget $sha256sums_url + test -e $filename || wget -nc --progress=dot:giga $image_url + grep $filename SHA256SUMS | sha256sum -c || + if [ $? -ne 0 ]; then + rm $filename + wget -nc --progress=dot:giga $image_url + grep $filename SHA256SUMS | sha256sum -c + fi + + for i in $(seq 0 9); do + [ -a /dev/loop$i ] || mknod -m 660 /dev/loop$i b 7 $i + done + + qemu-img convert $filename $raw_imgfile + cd - +} + +# mount image +setup() { +# qemu-img resize $raw_imgfile +5GB + mkdir -p $mountdir + + loopdevice=$(kpartx -l $raw_imgfile | head -1 | cut -f1 -d ' ') + + kpartx -av $raw_imgfile + + # for trouble shooting + sleep 2 + dmsetup ls + fuser -c /dev/loop0 + fuser -f /dev/loop0 + parted -l /dev/${loopdevice:0:5} || true + mount /dev/mapper/$loopdevice $mountdir + mount -t proc none $mountdir/proc + + sudo resize2fs /dev/mapper/$loopdevice + cp $cmd $mountdir/$(basename $cmd) + YARD_IMG_ARCH="amd64" #Neha added this just for testing + if [ "${YARD_IMG_ARCH}" = "arm64" ]; then + cp /usr/bin/qemu-aarch64-static $mountdir/usr/bin + fi +} + +# modify image running a script using in a chrooted environment +modify() { + # resolv.conf does not exist in base image, pass nameserver value from host + nameserver_ip=$(grep -m 1 '^nameserver' \ + /etc/resolv.conf | awk '{ print $2 '}) + + # prevent init scripts from running during install + echo $'#!/bin/sh\nexit 101' >$mountdir/usr/sbin/policy-rc.d + chmod a+x $mountdir/usr/sbin/policy-rc.d + + chroot $mountdir /$(basename $cmd) $nameserver_ip + + rm -rf $mountdir/usr/sbin/policy-rc.d + + umount -f $mountdir/proc + umount -l $mountdir + + qemu-img convert -c -o compat=0.10 -O qcow2 $raw_imgfile $imgfile + + if dmsetup table | grep $loopdevice; then + dmsetup clear $loopdevice || true + fi +} + +# cleanup (umount) the image +cleanup() { + # designed to be idempotent + mount | grep $mountdir/proc && umount -l $mountdir/proc + mount | grep $mountdir && umount -l $mountdir + mount | grep "/mnt/${release}" && umount -l "/mnt/${release}" + + if [ -f "${raw_imgfile}" ]; then + #kpartx -dv $raw_imgfile sometimes failed, we should checked it agein. + #if [ -z "$(kpartx -l $raw_imgfile | grep 'loop deleted')" ]; then + # kpartx -dv $raw_imgfile + #fi + kpartx -dv $raw_imgfile || true + fi + + rm -f $raw_imgfile + rm -rf $mountdir +} + +exitcode="" +error_trap() +{ + local rc=$? + + set +e + + if [ -z "$exitcode" ]; then + exitcode=$rc + fi + + dmesg -T | tail -50 + + cleanup + + echo "Image build failed with $exitcode" + + exit $exitcode +} + +main() { + cleanup + + trap "error_trap" EXIT SIGTERM + + download + setup + modify + + trap - EXIT SIGTERM + cleanup + + echo "the modified image is found here: $imgfile" +} + +main + diff --git a/tools/ubuntu-server-cloudimg-dpdk-samplevnf-modify.sh b/tools/ubuntu-server-cloudimg-dpdk-samplevnf-modify.sh new file mode 100755 index 00000000..924474d9 --- /dev/null +++ b/tools/ubuntu-server-cloudimg-dpdk-samplevnf-modify.sh @@ -0,0 +1,201 @@ +#!/bin/bash +# Copyright (c) 2016-2017 Intel Corporation +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# installs required packages +# must be run from inside the image (either chrooted or running) + +set -ex + +if [ $# -eq 1 ]; then + nameserver_ip=$1 + + # /etc/resolv.conf is a symbolic link to /run, restore at end + rm /etc/resolv.conf + echo "nameserver $nameserver_ip" > /etc/resolv.conf + echo "nameserver 8.8.8.8" >> /etc/resolv.conf + echo "nameserver 8.8.4.4" >> /etc/resolv.conf +fi + +INSTALL_BIN_PATH="/opt/nsb_bin" +BIN_PATH="/usr/sbin/" +TREX_VERSION="v2.20" +TREX_DOWNLOAD="https://trex-tgn.cisco.com/trex/release/$TREX_VERSION.tar.gz" +TREX_DIR=$INSTALL_BIN_PATH/trex/scripts + +enable_proxy() +{ + echo $https_proxy + echo $http_proxy + if [[ "$http_proxy" != "" ]]; then + echo 'Acquire::http::Proxy "$http_proxy";' > /etc/apt/apt.conf + fi +} + +install_trex() +{ + + INSTALL_BIN_PATH="/opt/nsb_bin" + DPDK_DOWNLOAD="http://dpdk.org/browse/dpdk/snapshot/dpdk-16.07.zip" + TREX_VERSION="v2.20" + TREX_DOWNLOAD="https://trex-tgn.cisco.com/trex/release/$TREX_VERSION.tar.gz" + TREX_DIR=$INSTALL_BIN_PATH/trex/scripts + pushd . + cd $INSTALL_BIN_PATH + echo "Build TRex and installing Trex TG in $INSTALL_BIN_PATH/trex" + rm -rf ${TREX_DOWNLOAD##*/} + if [ ! -e ${TREX_DOWNLOAD##*/} ] ; then + wget $TREX_DOWNLOAD + fi + tar zxvf ${TREX_DOWNLOAD##*/} + #pushd . + rm -rf $INSTALL_BIN_PATH/trex + mkdir -p $INSTALL_BIN_PATH/trex + mv $TREX_VERSION trex/scripts + rm -rf $TREX_VERSION.tar.gz + cd $INSTALL_BIN_PATH/trex/scripts/ko/src/ + make + make install + touch "$INSTALL_BIN_PATH/trex/scripts/automation/trex_control_plane/stl/__init__.py" + cp "$INSTALL_BIN_PATH/trex/scripts/dpdk_nic_bind.py" "$INSTALL_BIN_PATH" + popd +} +install_sample_vnf() +{ + mkdir -p $INSTALL_BIN_PATH + echo "Install Sample VNFs" + pushd . + cd $INSTALL_BIN_PATH + git clone https://git.opnfv.org/samplevnf + cd samplevnf + VNF_CORE=$INSTALL_BIN_PATH/samplevnf + ./tools/vnf_build.sh -s -d='17.02' -p='http://10.223.166.1:911' + cp $VNF_CORE/VNFs/vACL/build/vACL $INSTALL_BIN_PATH + cp $VNF_CORE/VNFs/vCGNAPT/build/vCGNAPT $INSTALL_BIN_PATH + cp $VNF_CORE/VNFs/vFW/build/vFW $INSTALL_BIN_PATH + cp $VNF_CORE/VNFs/DPPD-PROX/build/prox $INSTALL_BIN_PATH + cp $VNF_CORE/VNFs/UDP_Replay/build/UDP_Replay $INSTALL_BIN_PATH + cp $VNF_CORE/VNFs/vFW/vnf_template.txt $INSTALL_BIN_PATH + + # copy to standard path + cp $VNF_CORE/VNFs/vACL/build/vACL $BIN_PATH + cp $VNF_CORE/VNFs/vCGNAPT/build/vCGNAPT $BIN_PATH + cp $VNF_CORE/VNFs/vFW/build/vFW $BIN_PATH + cp $VNF_CORE/VNFs/DPPD-PROX/build/prox $BIN_PATH + cp $VNF_CORE/VNFs/UDP_Replay/build/UDP_Replay $BIN_PATH + + # build vpe + cd $VNF_CORE/dpdk/examples/ip_pipeline + export RTE_SDK= $VNF_CORE/dpdk + make + cp $VNF_CORE/build/ip_pipeline $INSTALL_BIN_PATH/vPE_vnf + + echo "Done" + popd +} +# iperf3 only available for trusty in backports +if grep -q trusty /etc/apt/sources.list ; then + if [ "${YARD_IMG_ARCH}" = "arm64" ]; then + echo "deb [arch=${YARD_IMG_ARCH}] http://ports.ubuntu.com/ trusty-backports main restricted universe multiverse" >> /etc/apt/sources.list + else + echo "deb http://archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse" >> /etc/apt/sources.list + fi +fi + +# Workaround for building on CentOS (apt-get is not working with http sources) +# sed -i 's/http/ftp/' /etc/apt/sources.list + +# Force apt to use ipv4 due to build problems on LF POD. +echo 'Acquire::ForceIPv4 "true";' > /etc/apt/apt.conf.d/99force-ipv4 + +echo 'GRUB_CMDLINE_LINUX="resume=/dev/sda1 default_hugepagesz=1G hugepagesz=1G hugepages=4 iommu=on iommu=pt intel_iommu=on"' >> /etc/default/grub +echo 'huge /mnt/huge hugetlbfs defaults 0 0' >> vi /etc/fstab + +mkdir /mnt/huge +chmod 777 /mnt/huge + +for i in {1..2} +do + touch /etc/network/interfaces.d/eth$i.cfg + chmod 777 /etc/network/interfaces.d/eth$i.cfg + echo "auto eth$i" >> /etc/network/interfaces.d/eth$i.cfg + echo "iface eth$i inet dhcp" >> /etc/network/interfaces.d/eth$i.cfg +done + +# this needs for checking dpdk status, adding interfaces to dpdk, bind, unbind etc.. + +# Add hostname to /etc/hosts. +# Allow console access via pwd +cat <<EOF >/etc/cloud/cloud.cfg.d/10_etc_hosts.cfg +manage_etc_hosts: True +#password: RANDOM +password: password +chpasswd: { expire: False } +ssh_pwauth: True +EOF + +linuxheadersversion=$(echo ls boot/vmlinuz* | cut -d- -f2-) + +apt-get update +apt-get install -y \ + bc \ + fio \ + gcc \ + git \ + iperf3 \ + iproute2 \ + ethtool \ + linux-tools-common \ + linux-tools-generic \ + lmbench \ + make \ + netperf \ + patch \ + perl \ + rt-tests \ + stress \ + sysstat \ + linux-headers-"${linuxheadersversion}" \ + libpcap-dev \ + chpasswd \ + lua5.2 + +# Build dpdk vPE VNF +pushd . +echo "root:root" | chpasswd +enable_proxy +install_sample_vnf +install_trex +popd . +cd /root + +sed -i -e 's/PermitRootLogin without-password/PermitRootLogin yes/g' /etc/ssh/sshd_config +sed -i -e 's/prohibit-password/yes/g' /etc/ssh/sshd_config +passwd + +CLONE_DEST=/opt/tempT +# remove before cloning +rm -rf -- "${CLONE_DEST}" +git clone https://github.com/kdlucas/byte-unixbench.git "${CLONE_DEST}" +make --directory "${CLONE_DEST}/UnixBench/" + +git clone https://github.com/beefyamoeba5/ramspeed.git "${CLONE_DEST}/RAMspeed" +cd "${CLONE_DEST}/RAMspeed/ramspeed-2.6.0" +mkdir temp +bash build.sh + +git clone https://github.com/beefyamoeba5/cachestat.git "${CLONE_DEST}"/Cachestat + +# restore symlink +ln -sfrT /run/resolvconf/resolv.conf /etc/resolv.conf |