diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/testing/developer/design/01-Overview.rst | 51 | ||||
| -rw-r--r-- | docs/testing/developer/design/02-Get_started_Guide.rst | 154 | ||||
| -rw-r--r-- | docs/testing/developer/design/04-SampleVNF_Desgin.rest | 123 | ||||
| -rw-r--r-- | docs/testing/developer/design/index.rst | 5 | ||||
| -rw-r--r-- | docs/testing/developer/requirements/03-Requirements.rst | 88 | ||||
| -rw-r--r-- | docs/testing/developer/requirements/index.rst | 5 |
6 files changed, 416 insertions, 10 deletions
diff --git a/docs/testing/developer/design/01-Overview.rst b/docs/testing/developer/design/01-Overview.rst new file mode 100644 index 00000000..e4c7a984 --- /dev/null +++ b/docs/testing/developer/design/01-Overview.rst @@ -0,0 +1,51 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel Corporation and others. + +.. OPNFV SAMPLEVNF Documentation design file. + +============ +Introduction +============ + +**Welcome to SampleVNF's developer getstarted documentation !** + +.. _Pharos: https://wiki.opnfv.org/pharos +.. _SampleVNF: https://wiki.opnfv.org/samplevnf +.. _Technical_Briefs: https://wiki.opnfv.org/display/SAM/Technical+Briefs+of+VNFs + +Overview: +--------- + +This project provides a placeholder for various sample VNF (Virtual Network Function) +development which includes example reference architecture and optimization methods +related to VNF/Network service for high performance VNFs. This project provides +benefits to other OPNFV projects like Functest, Models, yardstick etc to perform +real life use-case based testing and NFVi characterization for the same. + +The sample VNFs are Open Source approximations* of Telco grade VNF’s using optimized +VNF + NFVi Infrastructure libraries, with Performance Characterization of Sample† Traffic Flows. + * * Not a commercial product. Encourage the community to contribute and close the feature gaps. + * † No Vendor/Proprietary Workloads + +It helps to facilitate deterministic & repeatable bench-marking on +Industry standard high volume Servers. It augments well with a Test Infrastructure +to help facilitate consistent/repeatable methodologies for characterizing & validating +the sample VNFs through OPEN SOURCE VNF approximations and test tools. +The VNFs belongs to this project are never meant for field deployment. +All the VNF source code part of this project requires Apache License Version 2.0. + +Scope: +----- +The Scope of samplevnf project as follows" +To create a repository of sample VNFs to help VNF benchmarking and NFVi +characterization with real world traffic. +Host a common development environment for developing the VNF using optimized libraries +Integrate into CI tool chain and existing test frameworks for VNF feature and deployment testing + +Testability: +----------- +Network Service Testing framework added into the Yardstick will be used as a test +tool for Functional/Performance verification of all the sample VNFs. +Planning to extend the same to FuncTest and Models project to include the testcases +related to sample VNFs. diff --git a/docs/testing/developer/design/02-Get_started_Guide.rst b/docs/testing/developer/design/02-Get_started_Guide.rst new file mode 100644 index 00000000..4bcff899 --- /dev/null +++ b/docs/testing/developer/design/02-Get_started_Guide.rst @@ -0,0 +1,154 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel Corporation and others. + +.. OPNFV SAMPLEVNF Documentation design file. + +==================================== +Get started as a SampleVNF developer +=================================== + +.. _SampleVNF: https://wiki.opnfv.org/samplevnf +.. _Gerrit: https://www.gerritcodereview.com/ +.. _JIRA: https://jira.opnfv.org +.. _Technical_Briefs: https://wiki.opnfv.org/display/SAM/Technical+Briefs+of+VNFs + +Prerequisite knowledge +----------------------- +Development/Contribution to SampleVNF requires knowledge of networking technologies including +knowledge of network protocols and hands-on experience with relevant open-source +software, such as Linux*, SDN, NFVI and the DPDK (if VNF is based on DPDK libraries). +Developer needs debugging and benchmarking skils, as well as understanding of NFVi +infrastructure across multiple domains. + +There are many ways to contribute to samplevnf. + * Develop new test cases in samplevnf + * Review code changes + * Develop/contribute to existing VNFs or new VNFs + * Write samplevnf documentation + +Techical Briefs of existsin VNFs in Technical_Briefs_ + + +Get Started: +---------- +Where can I find some help to start? +You can also directly contact us by mail with [SampleVNF] prefix in the title at +opnfv-tech-discuss@lists.opnfv.org or on the IRC chan #opnfv-samplevnf. + +How TOs +How can I contribute to SampleVNF? +If you are already a contributor of any OPNFV project, you can contribute to samplevnf. +If you are totally new to OPNFV, you must first create your Linux Foundation account, +then contact us in order to declare you in the repository database. + +We distinguish 2 levels of contributors: +the standard contributor can push patch and vote +1/0/-1 on any samplevnf patch +The commitor can vote -2/-1/0/+1/+2 and merge +SampleVNF commitors are promoted by the samplevnf contributors. + +Gerrit & JIRA +OPNFV uses Gerrit_ for web based code review and repository management for the +Git Version Control System. You can access OPNFV Gerrit from this link. +Please note that you need to have Linux Foundation ID in order to use OPNFV Gerrit. +You can get one from this link. + +OPNFV uses JIRA_ for issue management. An important principle of change management +is to have two-way trace-ability between issue management (i.e. JIRA_) and the code repository (via Gerrit). +In this way, individual commits can be traced to JIRA issues and we also know which +commits were used to resolve a JIRA issue. +If you want to contribute to samplevnf, you can pick a issue from SampleVNF's +JIRA dashboard or you can create you own issue and submit it to JIRA. + +Submitting code to Gerrit +Installing and configuring Git and Git-Review is necessary in order to submit code to Gerrit. +The Getting to the code page will provide you with some help for that. + +Comitting the code with Git +Open a terminal window and set the project's directory to the working directory using the cd command. +In this case "/home/opnfv/samplevnf" is the path to the samplevnf project folder on my computer. +Replace this with the path of your own project. + +:: + cd /home/opnfv/samplevnf + +Tell Git which files you would like to take into account for the next commit. +This is called 'staging' the files, by placing them into the staging area, +using the 'git add' command (or the synonym 'git stage' command). + +:: + git add samplevnf/samples/sample.yaml + ... + +Alternatively, you can choose to stage all files that have been modified +(that is the files you have worked on) since the last time you generated a commit, by using the -a argument. + +:: + git add -a + +Git won't let you push (upload) any code to Gerrit if you haven't pulled the latest changes first. +So the next step is to pull (download) the latest changes made to the project by other collaborators using the 'pull' command. + +:: + git pull + +Now that you have the latest version of the project and you have staged the files you wish to push, +it is time to actually commit your work to your local Git repository. + +:: + git commit --signoff -m "Title of change + + Test of change that describes in high level what + was done. There is a lot of documentation in code + so you do not need to repeat it here. + + JIRA: SAMPLEVNF-XXX" + +The message that is required for the commit should follow a specific set of rules. +This practice allows to standardize the description messages attached to the commits, +and eventually navigate among the latter more easily. + +Verify your patch locally before submitting +Once you finish a patch, you can submit it to Gerrit for code review. +A developer sends a new patch to Gerrit will trigger patch verify job on Jenkins CI. + +Pushing the code to Gerrit for review +Now that the code has been comitted into your local Git repository the following +step is to push it online to Gerrit for it to be reviewed. The command we will use is 'git review'. + +:: + git review +This will automatically push your local commit into Gerrit. + +Code review +You can add Samplevnf committers and contributors to review your codes. + +Modifying the code under review in Gerrit +At the same time the code is being reviewed in Gerrit, you may need to edit it to +make some changes and then send it back for review. The following steps go through the procedure. +Once you have modified/edited your code files under your IDE, you will have to stage them. +The 'status' command is very helpful at this point as it provides an overview of Git's current state. + +:: + git status +The output of the command provides us with the files that have been modified after the latest commit. + +You can now stage the files that have been modified as part of the Gerrit code review +edition/modification/improvement using git add command. +It is now time to commit the newly modified files, but the objective here is not to +create a new commit, we simply want to inject the new changes into the previous commit. +You can achieve that with the '--amend' option on the 'commit' command: + +:: + git commit --amend + +If the commit was successful, the 'status' command should not return the updated +files as about to be commited. + +The final step consists in pushing the newly modified commit to Gerrit. + +:: + git review + +References +[1]: http://artifacts.opnfv.org/samplevnf/docs/testing_user_userguide_vACL/index.html diff --git a/docs/testing/developer/design/04-SampleVNF_Desgin.rest b/docs/testing/developer/design/04-SampleVNF_Desgin.rest new file mode 100644 index 00000000..6c39da73 --- /dev/null +++ b/docs/testing/developer/design/04-SampleVNF_Desgin.rest @@ -0,0 +1,123 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel Corporation and others. + +.. OPNFV SAMPLEVNF Documentation design file. + +=================================== +SampleVNF Highlevel Desing +=================================== + +vFW - Design +============= + +Requirements +----------------- +Following are the design requierments of the vFW. + +- The firewall will examine packets and verify that they are appropriate for the + current state of the connection. Inappropriate packets will be discarded, and + counter(s) incremented. +- Support both IPv4 and IPv6 traffic type for TCP/UDP/ICMP. +- All packet inspection features like firewall, synproxy, connection tracker + in this component may be turned off or on through CLI commands +- The Static filtering is done thorugh ACL using DPDK libraries. The rules + can be added/modified through CLI commands. +- Multiple instance of the vFW Pipeline running on multipe cores should be + supported for scaling the performance scaling. +- Should follow the DPDK IP pipeline framework +- Sould use the DPDK libraries and functionalities for better performance +- The memory should be allocated in Hugepages using DPDK RTE calls for better + performance. + + +High Level Design +================= + +The Firewall performs basic filtering for malformed packets and dynamic packet +filtering incoming packets using the connection tracker library. +The connection data will be stored using a DPDK hash table. There will be one +entry in the hash table for each connection. The hash key will be based on +source address/port,destination address/port, and protocol of a packet. The +hash key will be processed to allow a single entry to be used, regardless of +which direction the packet is flowing (thus changing source and destination). +The ACL is implemented as libray stattically linked to vFW, which is used for +used for rule based packet filtering. + +TCP connections and UDP pseudo connections will be tracked separately even if +theaddresses and ports are identical. Including the protocol in the hash key +will ensure this. + +The Input FIFO contains all the incoming packets for vFW filtering. The vFW +Filter has no dependency on which component has written to the Input FIFO. +Packets will be dequeued from the FIFO in bulk for processing by the vFW. +Packets will be enqueued to the output FIFO. + +The software or hardware loadbalancing can be used for traffic distribution +across multiple worker threads. The hardware loadbalancing require ethernet +flow director support from hardware (eg. Fortville x710 NIC card). +The Input and Output FIFOs will be implemented using DPDK Ring Buffers. + +Components of vFW +================= + +In vFW, each component is constructed using packet framework pipelines. +It includes Rx and Tx Driver, Master pipeline, load balancer pipeline and +vfw worker pipeline components. A Pipeline framework is a collection of input +ports, table(s),output ports and actions (functions). + +--------------------------- +Receive and Transmit Driver +--------------------------- +Packets will be received in bulk and provided to LoadBalancer(LB) thread. +Transimit takes packets from worker threads in a dedicated ring and sent to +hardware queue. + +--------------- +Master Pipeline +--------------- +The Master component is part of all the IP Pipeline applications. This component +does not process any packets and should configure with Core 0, to allow +other cores for processing of the traffic. This component is responsible for +1. Initializing each component of the Pipeline application in different threads +2. Providing CLI shell for the user control/debug +3. Propagating the commands from user to the corresponding components + +---------------- +ARPICMP Pipeline +---------------- +This pipeline processes the APRICMP packets. + +-------------- +TXRX Pipelines +-------------- +The TXTX and RXRX pipelines are pass through pipelines to forward both ingress +and egress traffic to Loadbalancer. This is required when the Software +Loadbalancer is used. + +---------------------- +Load Balancer Pipeline +---------------------- +The vFW support both hardware and software balancing for load balancing of +traffic across multiple VNF threads. The Hardware load balancing require support +from hardware like Flow Director for steering of packets to application through +hardware queues. + +The Software Load balancer is also supported if hardware load balancing can't be +used for any reason. The TXRX along with LOADB pipeline provides support for +software load balancing by distributing the flows to Multiple vFW worker +threads. +Loadbalancer (HW or SW) distributes traffic based on the 5 tuple (src addr, src +port, dest addr, dest port and protocol) applying an XOR logic distributing to +active worker threads, thereby maintaining an affinity of flows to worker +threads. + +------------ +vFW Pipeline +------------ +The vFW performs the basic packet filtering and will drop the invalid and +malformed packets.The Dynamic packet filtering done using the connection tracker +library. The packets are processed in bulk and Hash table is used to maintain +the connection details. +Every TCP/UDP packets are passed through connection tracker library for valid +connection. The ACL library integrated to firewall provide rule based filtering. diff --git a/docs/testing/developer/design/index.rst b/docs/testing/developer/design/index.rst deleted file mode 100644 index 03070d59..00000000 --- a/docs/testing/developer/design/index.rst +++ /dev/null @@ -1,5 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -.. OPNFV SAMPLEVNF Documentation design file. diff --git a/docs/testing/developer/requirements/03-Requirements.rst b/docs/testing/developer/requirements/03-Requirements.rst new file mode 100644 index 00000000..ce43e06a --- /dev/null +++ b/docs/testing/developer/requirements/03-Requirements.rst @@ -0,0 +1,88 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel Corporation and others. + +.. OPNFV SAMPLEVNF Documentation design file. + +============ +Requirements +============ + +**Required Test setup:** + +.. _SampleVNF: https://wiki.opnfv.org/samplevnf +.. _Technical_Briefs: https://wiki.opnfv.org/display/SAM/Technical+Briefs+of+VNFs + +Supported Test setup: +-------------------- +The device under test (DUT) consists of a system following; + * A single or dual processor and PCH chip, except for System on Chip (SoC) cases + * DRAM memory size and frequency (normally single DIMM per channel) + * Specific Intel Network Interface Cards (NICs) + * BIOS settings noting those that updated from the basic settings + * DPDK build configuration settings, and commands used for tests +Connected to the DUT is an IXIA* or Software Traffic generator like pktgen or TRex, +simulation platform to generate packet traffic to the DUT ports and +determine the throughput/latency at the tester side. + +Below are the supported/tested (:term `VNF`) deployment type. +.. image:: images/deploy_type.png + :width: 800px + :alt: SampleVNF supported topology + +Hardware & Software Ingredients +------------------------------- +.. code-block:: console + +---------------+------------------+ + | Item | Description | + +---------------+------------------+ + | Memory | Min 20GB | + +---------------+------------------+ + | NICs | 2 x 10G | + +---------------+------------------+ + | HostOS/Guest | Ubuntu 16.04 LTS | + +---------------+------------------+ + | kernel | >4.4.0-34-generic| + +---------------+------------------+ + |DPDK | >17.02 | + +---------------+------------------+ + + Boot and BIOS settings + +------------------+---------------------------------------------------+ + | Boot settings | default_hugepagesz=1G hugepagesz=1G hugepages=16 | + | | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33 | + | | nohz_full=1-11,22-33 rcu_nocbs=1-11,22-33 | + | | Note: nohz_full and rcu_nocbs is to disable Linux*| + | | kernel interrupts, and it’s import | + +------------------+---------------------------------------------------+ + |BIOS | CPU Power and Performance Policy <Performance> | + | | CPU C-state Disabled | + | | CPU P-state Disabled | + | | Enhanced Intel® Speedstep® Tech Disabled | + | | Hyper-Threading Technology (If supported) Enable | + | | Virtualization Techology Enable | + | | Coherency Enable | + | | Turbo Boost Disabled | + +------------------+---------------------------------------------------+ + +Network Topology for testing VNFs +--------------------------------- +The ethernet cables should be connected between traffic generator and the VNF server (BM, +SRIOV or OVS) setup based on the test profile. + +The connectivity could be +1. Single port pair : One pair ports used for traffic + :: + e.g. Single port pair link0 and link1 of VNF are used + TG:port 0 <------> VNF:Port 0 + TG:port 1 <------> VNF:Port 1 + +2. Multi port pair : More than one pair of traffic + :: + e.g. Two port pair link 0, link1, link2 and link3 of VNF are used + TG:port 0 <------> VNF:Port 0 + TG:port 1 <------> VNF:Port 1 + TG:port 2 <------> VNF:Port 2 + TG:port 3 <------> VNF:Port 3 +For openstack/Standalone virtualization, installation please refer the openstack guide and ovs-dpdk/sriov github. +(TBA - Add link to guide) diff --git a/docs/testing/developer/requirements/index.rst b/docs/testing/developer/requirements/index.rst deleted file mode 100644 index 8efa8620..00000000 --- a/docs/testing/developer/requirements/index.rst +++ /dev/null @@ -1,5 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -.. OPNFV SAMPLEVNF Documentation requirements file. |