diff options
Diffstat (limited to 'docs/testing/user/userguide')
| -rw-r--r-- | docs/testing/user/userguide/04-installation.rst | 59 | ||||
| -rw-r--r-- | docs/testing/user/userguide/05-BKMs.rst | 277 | ||||
| -rw-r--r-- | docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst | 579 | ||||
| -rw-r--r-- | docs/testing/user/userguide/index.rst | 2 |
4 files changed, 581 insertions, 336 deletions
diff --git a/docs/testing/user/userguide/04-installation.rst b/docs/testing/user/userguide/04-installation.rst index 265f4e61..5b8b9322 100644 --- a/docs/testing/user/userguide/04-installation.rst +++ b/docs/testing/user/userguide/04-installation.rst @@ -198,61 +198,4 @@ Standalone virtualization/Openstack: * cd yardstick and run ./tools/yardstick-img-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh -Modify Scripts as per Traffic Generator Settings ---------------------------------------------------------- - -e.g: vFW -Modify the configuration according to system test configuration. - -traffic_type selction in config file: -The traffic_type parmeter should be set to 4 (IPv4) or 6 (IPv6) -traffic type. - -There are many other vFW parameters which can be changed -in the config file for simulating different traffic conditions like -timeouts. - -Modify the scripts according to system test configuration. - -The routeadd and arpadd settings should be updated as per the -traffic generator settings. - -; routeadd <port #> <ipv4 nhip address in decimal> <Mask> -routeadd 0 202.16.100.20 0xff000000 -routeadd 1 172.16.40.20 0xff000000 - -;routeadd <port #> <ipv6 nhip address in hex> <Depth> -;routeadd 0 fec0::6a05:caff:fe30:21b0 64 -;routeadd 1 2012::6a05:caff:fe30:2081 64 - -; IPv4 static ARP -;p 1 arpadd 1 172.16.40.20 00:00:00:00:00:04 -;p 1 arpadd 0 202.16.100.20 00:00:00:00:00:01 - -; IPv6 static ARP -;p 1 arpadd 0 fec0::6a05:caff:fe30:21b0 00:00:00:00:00:01 -;p 1 arpadd 1 2012::6a05:caff:fe30:2081 00:00:00:00:00:04 - -The vFW supports enabling/disabling of multiple features -like firewall, conntrack, synproxy and debug. -Thease features can be enabled/disabled through scripts or -CLI commands. - - -ACL rules can be modified based on the test scenarios. -The default rules are provided for reference. - - -Commands to run vFW ----------------------------- -:: - SW_LoadB - ./vFW -p <port mask> -f <config> -s <script> - - HW_LoadB - ./vFW -p <port mask> -f <config> -s <script> -hwlb <num_WT> - - -Proxy Support (**Todo**) ---------------------------- - +To run VNFs. Please refer chapter `05-How_to_run_SampleVNFs.rst` diff --git a/docs/testing/user/userguide/05-BKMs.rst b/docs/testing/user/userguide/05-BKMs.rst deleted file mode 100644 index 289bdad2..00000000 --- a/docs/testing/user/userguide/05-BKMs.rst +++ /dev/null @@ -1,277 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Intel Corporation and others. - -SampleVNF BKMs - Example how to run VNF vFW -============================================ - - -Abstract --------- - -This project provides a placeholder for various sample VNF -(Virtual Network Function (:term `VNF`)) development which includes example -reference architecture and optimization methods related to VNF/Network service -for high performance VNFs. -The sample VNFs are Open Source approximations* of Telco grade VNF’s using -optimized VNF + NFVi Infrastructure libraries, with Performance Characterization -of Sample† Traffic Flows. - -:: - • * Not a commercial product. Encourage the community to contribute and close the feature gaps. - • † No Vendor/Proprietary Workloads - -SampleVNF supports installation directly in Ubuntu. The installation procedure -are detailed in the sections below. - -The steps needed to run SampleVNF are: -1. Install and Build SampleVNF. -2. deploy the VNF on the target and modify the config based on the - Network under test -3. Run the traffic generator to generate the traffic. - -Prerequisites -------------- - -Supported Test setup: --------------------- -The device under test (DUT) consists of a system following; - * A single or dual processor and PCH chip, except for System on Chip (SoC) cases - * DRAM memory size and frequency (normally single DIMM per channel) - * Specific Intel Network Interface Cards (NICs) - * BIOS settings noting those that updated from the basic settings - * DPDK build configuration settings, and commands used for tests -Connected to the DUT is an IXIA* or Software Traffic generator like pktgen or TRex, -simulation platform to generate packet traffic to the DUT ports and -determine the throughput/latency at the tester side. - -Below are the supported/tested (:term `VNF`) deployment type. -.. image:: images/deploy_type.png - :width: 800px - :alt: SampleVNF supported topology - -Hardware & Software Ingredients -------------------------------- -.. code-block:: console - +-----------+------------------+ - | Item | Description | - +-----------+------------------+ - | Memory | Min 20GB | - +-----------+------------------+ - | NICs | 2 x 10G | - +-----------+------------------+ - | OS | Ubuntu 16.04 LTS | - +-----------+------------------+ - | kernel | 4.4.0-34-generic| - +-----------+------------------+ - |DPD | 17.02 | - +-----------+------------------+ - - Boot and BIOS settings - +------------------+---------------------------------------------------+ - | Boot settings | default_hugepagesz=1G hugepagesz=1G hugepages=16 | - | | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33 | - | | nohz_full=1-11,22-33 rcu_nocbs=1-11,22-33 | - | | Note: nohz_full and rcu_nocbs is to disable Linux*| - | | kernel interrupts, and it’s import | - +------------------+---------------------------------------------------+ - |BIOS | CPU Power and Performance Policy <Performance> | - | | CPU C-state Disabled | - | | CPU P-state Disabled | - | | Enhanced Intel® Speedstep® Tech Disabled | - | | Hyper-Threading Technology (If supported) Enable | - | | Virtualization Techology Enable | - | | Coherency Enable | - | | Turbo Boost Disabled | - +------------------+---------------------------------------------------+ - -Network Topology for testing VNFs ---------------------------------- -The ethernet cables should be connected between traffic generator and the VNF server (BM, -SRIOV or OVS) setup based on the test profile. - -The connectivity could be -1. Single port pair : One pair ports used for traffic - :: - e.g. Single port pair link0 and link1 of VNF are used - TG:port 0 ------ VNF:Port 0 - TG:port 1 ------ VNF:Port 1 - -2. Multi port pair : More than one pair of traffic - :: - e.g. Two port pair link 0, link1, link2 and link3 of VNF are used - TG:port 0 ------ VNF:Port 0 - TG:port 1 ------ VNF:Port 1 - TG:port 2 ------ VNF:Port 2 - TG:port 3 ------ VNF:Port 3 - - * Bare-Metal - Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run - - * Stadalone Virtualization - PHY-VM-PHY - * SRIOV - Refer below link to setup sriov - https://software.intel.com/en-us/articles/using-sr-iov-to-share-an-ethernet-port-among-multiple-vms - - * OVS/OVS/DPDK - Refer below link to setup ovs/ovs-dpdk - http://docs.openvswitch.org/en/latest/intro/install/general/ - http://docs.openvswitch.org/en/latest/intro/install/dpdk/ - - * Openstack - use OPNFV installer to deploy the openstack. - -Traffic generator and VNF Setup details ----------------------------------------- - -step 0: Preparing hardware connection. - Connect Traffic generator and VNF system back to back as shown in previous section e.g. Bare-Metal Configuration - TRex port 0 ↔ (VNF Port 0) ↔ (VNF Port 1) ↔ TRex port 1 - -step 1: Setting up Traffic generator (TRex) (Refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html) - TRex Software preparations - -------------------------- - a. Install the OS (Bare metal Linux, not VM!) - b. Obtain the latest TRex package: wget https://trex-tgn.cisco.com/trex/release/latest - c. Untar the package: tar -xzf latest - d. Change dir to unzipped TRex - e. Create config file using command: sudo python dpdk_setup_ports.py -i - In case of Ubuntu 16 need python3 - See paragraph config creation for detailed step-by-step -step 2: Setting up VNF - - Deployment type - Bare-Metal: - ---------------------------- - a. Clone sampleVNF project repository - git clone https://git.opnfv.org/samplevnf - Auto Build - * Interactive options: - ./tools/vnf_build.sh -i - Follow the steps in the screen from option [1] –> [9] and select option [8] to build the vnfs. It will automatically download selected DPDK version and any required patches and will setup everything and build VNFs. - Following are the options for setup: - ---------------------------------------------------------- - Step 1: Environment setup. - ---------------------------------------------------------- - [1] Check OS and network connection - [2] Select DPDK RTE version - - ---------------------------------------------------------- - Step 2: Download and Install - ---------------------------------------------------------- - [3] Agree to download - [4] Download packages - [5] Download DPDK zip - [6] Build and Install DPDK - [7] Setup hugepages - - ---------------------------------------------------------- - Step 3: Build VNFs - ---------------------------------------------------------- - [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX) - - [9] Exit Script - * non-Interactive options: - ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02> - Manual Build - 1. Download DPDK supported version from dpdk.org - http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip - unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions) - cd dpdk - make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc - cd x86_64-native-linuxapp-gcc - make - 2. Setup huge pages - For 1G/2M hugepage sizes, for example 1G pages, the size must be - specified explicitly and can also be optionally set as the - default hugepage size for the system. For example, to reserve 8G - of hugepage memory in the form of eight 1G pages, the following - options should be passed to the kernel: * default_hugepagesz=1G - hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048 - 3. Add this to Go to /etc/default/grub configuration file. - Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048” - to the GRUB_CMDLINE_LINUX entry. - 4. Setup Environment Variable - export RTE_SDK=<samplevnf>/dpdk - export RTE_TARGET=x86_64-native-linuxapp-gcc - export VNF_CORE=<samplevnf> - or using ./tools/setenv.sh - 5. Build vFW VNFs - cd <samplevnf>/VNFs/vFW - make clean - make - The vFW executable will be created at the following location - <samplevnf>/VNFs/vFW/build/vFW - -step 3: Running VNF - a. Setup Port to run VNF - For DPDK versions 17.xx - 1. cd <samplevnf>/dpdk - 2. ./usertools/dpdk-devbind.py --status <--- List the network device - 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> - .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules - b. Prepare script to enalble VNF to route the packets - :: - cd <samplevnf>/VNFs/vFW/config - Open -> VFW_SWLB_SinglePortPair_script.tc. Replace the bold items based on your setting. - - link 0 config <VNF port 0 IP eg 202.16.100.10> 8 - link 0 up - link 1 down - link 1 config <VNF port 0 IP eg 172.16.40.10> 8 - link 1 up - ; routeadd <port #> <ipv4 nhip address in decimal> <Mask> - routeadd 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000 - routeadd 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000 - - ; IPv4 static ARP; disable if dynamic arp is enabled. - p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC> - p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC> - p action add 0 accept - p action add 0 fwd 0 - p action add 0 count - p action add 1 accept - p action add 1 fwd 1 - p action add 1 count - p action add 2 drop - p action add 2 count - p action add 0 conntrack - p action add 1 conntrack - p action add 2 conntrack - p action add 3 conntrack - ; IPv4 rules - p vfw add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2 - p vfw add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1 - p vfw add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0 - p vfw applyruleset - c. Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk. - :: - cd <samplevnf>/VNFs/vFW/ - ./build/vFW -p 0x3 -f ./config/VFW_SWLB_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_SinglePortPair_script.tc - -step 4: Run Test using traffic geneator - -On traffic generator system: - cd <trex eg v2.28/stl> - Update the bench.py to generate the traffic. - - class STLBench(object): - ip_range = {} - ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'} - ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<traffic generator port 1 IP eg 172.16.40.20>'} - cd <trex eg v2.28> - Run the TRex server: sudo ./t-rex-64 -i -c 7 - In another shell run TRex console: trex-console - The console can be run from another computer with -s argument, --help for more info. - Other options for TRex client are automation or GUI - In the console, run "tui" command, and then send the traffic with commands like: - start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1 - For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html - -Deployment type Standalone Virtualization/Openstack: -Step 0: Setup the NFVi Infrastrucutre. (Refer installation section) -Step 1: Build SampleVNF enabled VM - * Build image from yardstick - git clone https://git.opnfv.org/yardstick - * cd yardstick and run - ./tools/yardstick-img-modify tools/ubuntu-server-cloudimg-samplevnf-modify.sh -Step 3: Follow steps 0 to 4 in above section to run the VNF. diff --git a/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst new file mode 100644 index 00000000..c7667dec --- /dev/null +++ b/docs/testing/user/userguide/05-How_to_run_SampleVNFs.rst @@ -0,0 +1,579 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Intel Corporation and others. + +SampleVNF - How to run +====================== + +Prerequisites +------------- + +Supported Test setup: +-------------------- +The device under test (DUT) consists of a system following; + * A single or dual processor and PCH chip, except for System on Chip (SoC) cases + * DRAM memory size and frequency (normally single DIMM per channel) + * Specific Intel Network Interface Cards (NICs) + * BIOS settings noting those that updated from the basic settings + * DPDK build configuration settings, and commands used for tests +Connected to the DUT is an IXIA* or Software Traffic generator like pktgen or TRex, +simulation platform to generate packet traffic to the DUT ports and +determine the throughput/latency at the tester side. + +Below are the supported/tested (:term `VNF`) deployment type. +.. image:: images/deploy_type.png + :width: 800px + :alt: SampleVNF supported topology + +Hardware & Software Ingredients +------------------------------- +.. code-block:: console + +-----------+------------------+ + | Item | Description | + +-----------+------------------+ + | Memory | Min 20GB | + +-----------+------------------+ + | NICs | 2 x 10G | + +-----------+------------------+ + | OS | Ubuntu 16.04 LTS | + +-----------+------------------+ + | kernel | 4.4.0-34-generic| + +-----------+------------------+ + |DPDK | 17.02 | + +-----------+------------------+ + + Boot and BIOS settings + +------------------+---------------------------------------------------+ + | Boot settings | default_hugepagesz=1G hugepagesz=1G hugepages=16 | + | | hugepagesz=2M hugepages=2048 isolcpus=1-11,22-33 | + | | nohz_full=1-11,22-33 rcu_nocbs=1-11,22-33 | + | | Note: nohz_full and rcu_nocbs is to disable Linux*| + | | kernel interrupts, and it’s import | + +------------------+---------------------------------------------------+ + |BIOS | CPU Power and Performance Policy <Performance> | + | | CPU C-state Disabled | + | | CPU P-state Disabled | + | | Enhanced Intel® Speedstep® Tech Disabled | + | | Hyper-Threading Technology (If supported) Enable | + | | Virtualization Techology Enable | + | | Coherency Enable | + | | Turbo Boost Disabled | + +------------------+---------------------------------------------------+ + +Network Topology for testing VNFs +--------------------------------- +The ethernet cables should be connected between traffic generator and the VNF server (BM, +SRIOV or OVS) setup based on the test profile. + +The connectivity could be +1. Single port pair : One pair ports used for traffic + :: + e.g. Single port pair link0 and link1 of VNF are used + TG:port 0 ------ VNF:Port 0 + TG:port 1 ------ VNF:Port 1 + +2. Multi port pair : More than one pair of traffic + :: + e.g. Two port pair link 0, link1, link2 and link3 of VNF are used + TG:port 0 ------ VNF:Port 0 + TG:port 1 ------ VNF:Port 1 + TG:port 2 ------ VNF:Port 2 + TG:port 3 ------ VNF:Port 3 + + * Bare-Metal + Refer: http://fast.dpdk.org/doc/pdf-guides/ to setup the DUT for VNF to run + + * Stadalone Virtualization - PHY-VM-PHY + * SRIOV + Refer below link to setup sriov + https://software.intel.com/en-us/articles/using-sr-iov-to-share-an-ethernet-port-among-multiple-vms + + * OVS/OVS-DPDK + Refer below link to setup ovs/ovs-dpdk + http://docs.openvswitch.org/en/latest/intro/install/general/ + http://docs.openvswitch.org/en/latest/intro/install/dpdk/ + + * Openstack + use OPNFV installer to deploy the openstack. + +Setup Traffic generator +----------------------- + +Step 0: Preparing hardware connection:: + Connect Traffic generator and VNF system back to back as shown in previous section + TRex port 0 ↔ (VNF Port 0) ↔ (VNF Port 1) ↔ TRex port 1 + +Step 1: Setting up Traffic generator (TRex) :: + (Refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html) + TRex Software preparations + ^^^^^^^^^^^^^^^^^^^^^^^^^^ + a. Install the OS (Bare metal Linux, not VM!) + b. Obtain the latest TRex package: wget https://trex-tgn.cisco.com/trex/release/latest + c. Untar the package: tar -xzf latest + d. Change dir to unzipped TRex + e. Create config file using command: sudo python dpdk_setup_ports.py -i + In case of Ubuntu 16 need python3 + See paragraph config creation for detailed step-by-step + + +Build SampleVNFs +----------------- +Step 2: Procedure to build SampleVNFs:: + a) Clone sampleVNF project repository - git clone https://git.opnfv.org/samplevnf + b) Build VNFs + Auto Build + ^^^^^^^^^^ + * Interactive options: + ./tools/vnf_build.sh -i + Follow the steps in the screen from option [1] –> [9] and select option [8] to build the vnfs. + It will automatically download selected DPDK version and any required patches and will setup everything and build VNFs. + Following are the options for setup: + ---------------------------------------------------------- + Step 1: Environment setup. + ---------------------------------------------------------- + [1] Check OS and network connection + [2] Select DPDK RTE version + + ---------------------------------------------------------- + Step 2: Download and Install + ---------------------------------------------------------- + [3] Agree to download + [4] Download packages + [5] Download DPDK zip + [6] Build and Install DPDK + [7] Setup hugepages + + ---------------------------------------------------------- + Step 3: Build VNFs + ---------------------------------------------------------- + [8] Build all VNFs (vACL, vCGNAPT, vFW, UDP_Replay, DPPD-PROX) + + [9] Exit Script + * non-Interactive options: + ./tools/vnf_build.sh -s -d=<dpdk version eg 17.02> + Manual Build + ^^^^^^^^^^^^ + 1. Download DPDK supported version from dpdk.org + http://dpdk.org/browse/dpdk/snapshot/dpdk-$DPDK_RTE_VER.zip + unzip dpdk-$DPDK_RTE_VER.zip and apply dpdk patches only in case of 16.04 (Not required for other DPDK versions) + cd dpdk + make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc + cd x86_64-native-linuxapp-gcc + make + 2. Setup huge pages + For 1G/2M hugepage sizes, for example 1G pages, the size must be + specified explicitly and can also be optionally set as the + default hugepage size for the system. For example, to reserve 8G + of hugepage memory in the form of eight 1G pages, the following + options should be passed to the kernel: * default_hugepagesz=1G + hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048 + 3. Add this to Go to /etc/default/grub configuration file. + Append “default_hugepagesz=1G hugepagesz=1G hugepages=8 hugepagesz=2M hugepages=2048” + to the GRUB_CMDLINE_LINUX entry. + 4. Setup Environment Variable + export RTE_SDK=<samplevnf>/dpdk + export RTE_TARGET=x86_64-native-linuxapp-gcc + export VNF_CORE=<samplevnf> + or using ./tools/setenv.sh + 5. Build VNFs + cd <samplevnf> + make + or to build individual VNFs + cd <samplevnf>/VNFs/ + make clean + make + The vFW executable will be created at the following location + <samplevnf>/VNFs/vFW/build/vFW + +Virtual Firewall - How to run +----------------------------- + +Step 3: Bind the datapath ports to DPDK :: + a. Bind ports to DPDK + For DPDK versions 17.xx + 1. cd <samplevnf>/dpdk + 2. ./usertools/dpdk-devbind.py --status <--- List the network device + 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> + .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules + b. Prepare script to enalble VNF to route the packets + cd <samplevnf>/VNFs/vFW/config + Open -> VFW_SWLB_SinglePortPair_script.tc. Replace the bold items based on your setting. + + link 0 config <VNF port 0 IP eg 202.16.100.10> 8 + link 0 up + link 1 down + link 1 config <VNF port 0 IP eg 172.16.40.10> 8 + link 1 up + + ; routeadd <port #> <ipv4 nhip address in decimal> <Mask> + routeadd 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000 + routeadd 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000 + + ; IPv4 static ARP; disable if dynamic arp is enabled. + p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC> + p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC> + p action add 0 accept + p action add 0 fwd 0 + p action add 0 count + p action add 1 accept + p action add 1 fwd 1 + p action add 1 count + p action add 2 drop + p action add 2 count + p action add 0 conntrack + p action add 1 conntrack + p action add 2 conntrack + p action add 3 conntrack + ; IPv4 rules + p vfw add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2 + p vfw add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1 + p vfw add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0 + p vfw applyruleset + c. Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk. + cd <samplevnf>/VNFs/vFW/ + ./build/vFW -p 0x3 -f ./config/VFW_SWLB_SinglePortPair_4Thread.cfg -s ./config/VFW_SWLB_SinglePortPair_script.tc + +step 4: Run Test using traffic geneator :: + On traffic generator system: + cd <trex eg v2.28/stl> + Update the bench.py to generate the traffic. + + class STLBench(object): + ip_range = {} + ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'} + ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<traffic generator port 1 IP eg 172.16.40.20>'} + cd <trex eg v2.28> + Run the TRex server: sudo ./t-rex-64 -i -c 7 + In another shell run TRex console: trex-console + The console can be run from another computer with -s argument, --help for more info. + Other options for TRex client are automation or GUI + In the console, run "tui" command, and then send the traffic with commands like: + start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1 + For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html + +Virtual Access Control list - How to run +---------------------------------------- + +Step 3: Bind the datapath ports to DPDK :: + a. Bind ports to DPDK + For DPDK versions 17.xx + 1. cd <samplevnf>/dpdk + 2. ./usertools/dpdk-devbind.py --status <--- List the network device + 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> + .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules + b. Prepare script to enalble VNF to route the packets + cd <samplevnf>/VNFs/vACL/config + Open -> IPv4_swlb_acl.tc. Replace the bold items based on your setting. + + link 0 config <VNF port 0 IP eg 202.16.100.10> 8 + link 0 up + link 1 down + link 1 config <VNF port 0 IP eg 172.16.40.10> 8 + link 1 up + ; routeadd <port #> <ipv4 nhip address in decimal> <Mask> + routeadd 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000 + routeadd 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000 + + ; IPv4 static ARP; disable if dynamic arp is enabled. + p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC> + p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC> + p action add 0 accept + p action add 0 fwd 0 + p action add 0 count + p action add 1 accept + p action add 1 fwd 1 + p action add 1 count + p action add 2 drop + p action add 2 count + p action add 0 conntrack + p action add 1 conntrack + p action add 2 conntrack + p action add 3 conntrack + ; IPv4 rules + p acl add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2 + p acl add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1 + p acl add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0 + p acl applyruleset + c. Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk. + cd <samplevnf>/VNFs/vFW/ + ./build/vFW -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg -s ./config/IPv4_swlb_acl.tc. + +step 4: Run Test using traffic geneator :: + On traffic generator system: + cd <trex eg v2.28/stl> + Update the bench.py to generate the traffic. + + class STLBench(object): + ip_range = {} + ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'} + ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<traffic generator port 1 IP eg 172.16.40.20>'} + cd <trex eg v2.28> + Run the TRex server: sudo ./t-rex-64 -i -c 7 + In another shell run TRex console: trex-console + The console can be run from another computer with -s argument, --help for more info. + Other options for TRex client are automation or GUI + In the console, run "tui" command, and then send the traffic with commands like: + start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1 + For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html + +Virtual Access Control list - How to run +---------------------------------------- + +Step 3: Bind the datapath ports to DPDK :: + a. Bind ports to DPDK + For DPDK versions 17.xx + 1. cd <samplevnf>/dpdk + 2. ./usertools/dpdk-devbind.py --status <--- List the network device + 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> + .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules + b. Prepare script to enalble VNF to route the packets + cd <samplevnf>/VNFs/vACL/config + Open -> IPv4_swlb_acl.tc. Replace the bold items based on your setting. + + link 0 config <VNF port 0 IP eg 202.16.100.10> 8 + link 0 up + link 1 down + link 1 config <VNF port 0 IP eg 172.16.40.10> 8 + link 1 up + ; routeadd <port #> <ipv4 nhip address in decimal> <Mask> + routeadd 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000 + routeadd 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000 + + ; IPv4 static ARP; disable if dynamic arp is enabled. + p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC> + p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC> + p action add 0 accept + p action add 0 fwd 0 + p action add 0 count + p action add 1 accept + p action add 1 fwd 1 + p action add 1 count + p action add 2 drop + p action add 2 count + p action add 0 conntrack + p action add 1 conntrack + p action add 2 conntrack + p action add 3 conntrack + ; IPv4 rules + p acl add 1 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 67 69 0 0 2 + p acl add 2 <traffic generator port 0 IP eg 202.16.100.20> 8 <traffic generator port 1 IP eg 172.16.40.20> 8 0 65535 0 65535 0 0 1 + p acl add 2 <traffic generator port 1 IP eg 172.16.40.20> 8 <traffic generator port 0 IP eg 202.16.100.20> 8 0 65535 0 65535 0 0 0 + p acl applyruleset + c. Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk. + cd <samplevnf>/VNFs/vACL/ + ./build/vACL -p 0x3 -f ./config/IPv4_swlb_acl_1LB_1t.cfg -s ./config/IPv4_swlb_acl.tc. + +step 4: Run Test using traffic geneator :: + On traffic generator system: + cd <trex eg v2.28/stl> + Update the bench.py to generate the traffic. + + class STLBench(object): + ip_range = {} + ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'} + ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<traffic generator port 1 IP eg 172.16.40.20>'} + cd <trex eg v2.28> + Run the TRex server: sudo ./t-rex-64 -i -c 7 + In another shell run TRex console: trex-console + The console can be run from another computer with -s argument, --help for more info. + Other options for TRex client are automation or GUI + In the console, run "tui" command, and then send the traffic with commands like: + start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1 + For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html + +vCGNAPT - How to run +---------------------------------------- + +Step 3: Bind the datapath ports to DPDK :: + a. Bind ports to DPDK + For DPDK versions 17.xx + 1. cd <samplevnf>/dpdk + 2. ./usertools/dpdk-devbind.py --status <--- List the network device + 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> + .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules + b. Prepare script to enalble VNF to route the packets + cd <samplevnf>/VNFs/vCGNAPT/config + Open -> sample_swlb_2port_2WT.tc Replace the bold items based on your setting. + + link 0 config <VNF port 0 IP eg 202.16.100.10> 8 + link 0 up + link 1 down + link 1 config <VNF port 0 IP eg 172.16.40.10> 8 + link 1 up + + ; uncomment to enable static NAPT + ;p <cgnapt pipeline id> entry addm <prv_ipv4/6> prvport> <pub_ip> <pub_port> <phy_port> <ttl> <no_of_entries> <end_prv_port> <end_pub_port> + ;p 5 entry addm 202.16.100.20 1234 152.16.40.10 1 0 500 65535 1234 65535 + + + ; routeadd <port #> <ipv4 nhip address in decimal> <Mask> + routeadd 0 <traffic generator port 0 IP eg 202.16.100.20> 0xff000000 + routeadd 1 <traffic generator port 1 IP eg 172.16.40.20> 0xff000000 + + ; IPv4 static ARP; disable if dynamic arp is enabled. + p 1 arpadd 0 <traffic generator port 0 IP eg 202.16.100.20> <traffic generator port 0 MAC> + p 1 arpadd 1 <traffic generator port 1 IP eg 172.16.40.20> <traffic generator port 1 MAC> + For dynamic cgnapt. Please use UDP_Replay as one of the traffic generator + (TG1) (port 0) --> (port 0) VNF (CGNAPT) (Port 1) --> (port0)(UDPReplay) + + c. Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk. + cd <samplevnf>/VNFs/vCGNAPT/ + ./build/vCGNAPT -p 0x3 -f ./config/sample_swlb_2port_2WT.cfg -s ./config/sample_swlb_2port_2WT.tc + + +step 4: Run Test using traffic geneator :: + On traffic generator system: + cd <trex eg v2.28/stl> + Update the bench.py to generate the traffic. + + class STLBench(object): + ip_range = {} + ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'} + ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<public ip e.g 152.16.40.10>'} + cd <trex eg v2.28> + Run the TRex server: sudo ./t-rex-64 -i -c 7 + In another shell run TRex console: trex-console + The console can be run from another computer with -s argument, --help for more info. + Other options for TRex client are automation or GUI + In the console, run "tui" command, and then send the traffic with commands like: + start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1 + For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html + +UDP_Replay - How to run +---------------------------------------- + +Step 3: Bind the datapath ports to DPDK :: + a. Bind ports to DPDK + For DPDK versions 17.xx + 1. cd <samplevnf>/dpdk + 2. ./usertools/dpdk-devbind.py --status <--- List the network device + 3. ./usertools/dpdk-devbind.py -b igb_uio <PCI Port 0> <PCI Port 1> + .. _More details: http://dpdk.org/doc/guides-17.05/linux_gsg/build_dpdk.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules + b. Run below cmd to launch the VNF. Please make sure both hugepages and ports to be used are bind to dpdk. + cd <samplevnf>/VNFs/UDP_Replay/ + cmd: ./build/UDP_Replay -c 0x7 -n 4 -w <pci> -w <pci> -- --no-hw-csum -p <portmask> --config='(port, queue, cpucore)' + e.g ./build/UDP_Replay -c 0x7 -n 4 -w 0000:07:00.0 -w 0000:07:00.1 -- --no-hw-csum -p 0x3 --config='(0, 0, 1)(1, 0, 2)' + +step 4: Run Test using traffic geneator :: + On traffic generator system: + cd <trex eg v2.28/stl> + Update the bench.py to generate the traffic. + + class STLBench(object): + ip_range = {} + ip_range['src'] = {'start': '<traffic generator port 0 IP eg 202.16.100.20>', 'end': '<traffic generator port 0 IP eg 202.16.100.20>'} + ip_range['dst'] = {'start': '<traffic generator port 1 IP eg 172.16.40.20>', 'end': '<public ip e.g 152.16.40.10>'} + cd <trex eg v2.28> + Run the TRex server: sudo ./t-rex-64 -i -c 7 + In another shell run TRex console: trex-console + The console can be run from another computer with -s argument, --help for more info. + Other options for TRex client are automation or GUI + In the console, run "tui" command, and then send the traffic with commands like: + start -f stl/bench.py -m 50% --port 0 3 -t size=590,vm=var1 + For more details refer: https://trex-tgn.cisco.com/trex/doc/trex_stateless_bench.html + +PROX - How to run +--------------------- + +Description +----------- +This is PROX, the Packet pROcessing eXecution engine, part of Intel(R) +Data Plane Performance Demonstrators, and formerly known as DPPD-BNG. +PROX is a DPDK-based application implementing Telco use-cases such as +a simplified BRAS/BNG, light-weight AFTR... It also allows configuring +finer grained network functions like QoS, Routing, load-balancing... + +Compiling and running this application +-------------------------------------- +This application supports DPDK 16.04, 16.11, 17.02 and 17.05. +The following commands assume that the following variables have been set: + +export RTE_SDK=/path/to/dpdk +export RTE_TARGET=x86_64-native-linuxapp-gcc + +Example: DPDK 17.05 installation +-------------------------------- +git clone http://dpdk.org/git/dpdk +cd dpdk +git checkout v17.05 +make install T=$RTE_TARGET + +PROX compilation +---------------- +The Makefile with this application expects RTE_SDK to point to the +root directory of DPDK (e.g. export RTE_SDK=/root/dpdk). If RTE_TARGET +has not been set, x86_64-native-linuxapp-gcc will be assumed. + +Running PROX +------------ +After DPDK has been set up, run make from the directory where you have +extracted this application. A build directory will be created +containing the PROX executable. The usage of the application is shown +below. Note that this application assumes that all required ports have +been bound to the DPDK provided igb_uio driver. Refer to the "Getting +Started Guide - DPDK" document for more details. + +Usage: ./build/prox [-f CONFIG_FILE] [-l LOG_FILE] [-p] [-o DISPLAY] [-v] [-a|-e] \ + [-m|-s|-i] [-n] [-w DEF] [-q] [-k] [-d] [-z] [-r VAL] [-u] [-t] + -f CONFIG_FILE : configuration file to load, ./prox.cfg by default + -l LOG_FILE : log file name, ./prox.log by default + -p : include PID in log file name if default log file is used + -o DISPLAY: Set display to use, can be 'curses' (default), 'cli' or 'none' + -v verbosity : initial logging verbosity + -a : autostart all cores (by default) + -e : don't autostart + -n : Create NULL devices instead of using PCI devices, useful together with -i + -m : list supported task modes and exit + -s : check configuration file syntax and exit + -i : check initialization sequence and exit + -u : Listen on UDS /tmp/prox.sock + -t : Listen on TCP port 8474 + -q : Pass argument to Lua interpreter, useful to define variables + -w : define variable using syntax varname=value + takes precedence over variables defined in CONFIG_FILE + -k : Log statistics to file "stats_dump" in current directory + -d : Run as daemon, the parent process will block until PROX is not initialized + -z : Ignore CPU topology, implies -i + -r : Change initial screen refresh rate. If set to a lower than 0.001 seconds, + screen refreshing will be disabled + +While applications using DPDK typically rely on the core mask and the +number of channels to be specified on the command line, this +application is configured using a .cfg file. The core mask and number +of channels is derived from this config. For example, to run the +application from the source directory execute: + + user@target:~$ ./build/prox -f ./config/nop.cfg + +Provided example configurations +------------------------------- +PROX can be configured either as the SUT (System Under Test) or as the +Traffic Generator. Some example configuration files are provided, both +in the config directory to run PROX as a SUT, and in the gen directory +to run it as a Traffic Generator. +A quick description of these example configurations is provided below. +Additional details are provided in the example configuration files. + +Basic configurations, mostly used as sanity check: +- config/nop.cfg +- config/nop-rings.cfg +- gen/nop-gen.cfg + +Simplified BNG (Border Network Gateway) configurations, using different +number of ports, with and without QoS, running on the host or in a VM: +- config/bng-4ports.cfg +- config/bng-8ports.cfg +- config/bng-qos-4ports.cfg +- config/bng-qos-8ports.cfg +- config/bng-1q-4ports.cfg +- config/bng-ovs-usv-4ports.cfg +- config/bng-no-cpu-topology-4ports.cfg +- gen/bng-4ports-gen.cfg +- gen/bng-8ports-gen.cfg +- gen/bng-ovs-usv-4ports-gen.cfg + +Light-weight AFTR configurations: +- config/lw_aftr.cfg +- gen/lw_aftr-gen.cfg + diff --git a/docs/testing/user/userguide/index.rst b/docs/testing/user/userguide/index.rst index e21f1faa..2099025f 100644 --- a/docs/testing/user/userguide/index.rst +++ b/docs/testing/user/userguide/index.rst @@ -16,6 +16,6 @@ SampleVNF User Guide 02-methodology 03-architecture 04-installation - 05-BKMs + 05-How_to_run_SampleVNFs glossary references |