diff options
Diffstat (limited to 'VNFs')
23 files changed, 232 insertions, 167 deletions
diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput.test b/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput.test index ce9ba72b..6b1e6772 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput.test +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput.test @@ -42,11 +42,6 @@ warmuptime=2 [test2] test=TST009test -# Following parameter defines the success criterium for the test. -# When this test uses multiple combinations of packet size and flows, -# all combinations must be meeting the same threshold -# The threshold is expressed in Mpps -pass_threshold=0.1 imixs=[[64],[128]] # the number of flows in the list need to be powers of 2, max 2^20 # Select from following numbers: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072, 262144, 524288, 1048576 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput_64B_64F.test b/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput_64B_64F.test index 866db5c3..c10c50e7 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput_64B_64F.test +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput_64B_64F.test @@ -35,11 +35,6 @@ cores = [1] [test1] test=TST009test -# Following parameter defines the success criterium for the test. -# When this test uses multiple combinations of packet size and flows, -# all combinations must be meeting the same threshold -# The threshold is expressed in Mpps -pass_threshold=0.001 imixs=[[64]] # the number of flows in the list need to be powers of 2, max 2^20 # Select from following numbers: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072, 262144, 524288, 1048576 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput_acaeab_16384F.test b/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput_acaeab_16384F.test new file mode 100644 index 00000000..9b6585a6 --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/TST009_Throughput_acaeab_16384F.test @@ -0,0 +1,54 @@ +## +## Copyright (c) 2010-2020 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +[TestParameters] +name = Rapid_ETSINFV_TST009 +number_of_tests = 1 +total_number_of_test_machines = 2 +lat_percentile = 99 + +[TestM1] +name = Generator +config_file = gen.cfg +dest_vm = 2 +gencores = [1] +latcores = [3] +#bucket_size_exp = 12 + +[TestM2] +name = Swap +config_file = swap.cfg +cores = [1] + +[test1] +test=TST009test +# Following parameter defines the success criterium for the test. +# When this test uses multiple combinations of packet size and flows, +# all combinations must be meeting the same threshold +# The threshold is expressed in Mpps +pass_threshold=0.001 +imixs=[[64,256,64,1024,64,128]] +# the number of flows in the list need to be powers of 2, max 2^20 +# Select from following numbers: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072, 262144, 524288, 1048576 +flows=[16384] +drop_rate_threshold = 0 +lat_avg_threshold = 120 +lat_perc_threshold = 220 +lat_max_threshold = inf +MAXr = 3 +MAXz = 5000 +MAXFramesPerSecondAllIngress = 12000000 +StepSize = 10000 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/basicrapid.test b/VNFs/DPPD-PROX/helper-scripts/rapid/basicrapid.test index fbf75a02..f27e4987 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/basicrapid.test +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/basicrapid.test @@ -44,11 +44,6 @@ warmuptime=2 [test2] test=flowsizetest -# Following parameter defines the success criterium for the test. -# When this test uses multiple combinations of packet size and flows, -# all combinations must be meeting the same threshold -# The threshold is expressed in Mpps -pass_threshold=0.1 # Each element in the imix list will result in a separate test. Each element # is on its turn a list of packet sizes which will be used during one test # execution. If you only want to test 1 size, define a list with only one diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/format.yaml b/VNFs/DPPD-PROX/helper-scripts/rapid/format.yaml index 6b1eb456..d9c55405 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/format.yaml +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/format.yaml @@ -22,6 +22,8 @@ PacketsReceived: PacketsReceived PacketsLost: PacketsLost rapid_flowsizetest: + Environment: environment_file + Test: test Flows: Flows Size: Size Speed (Mpps): @@ -42,17 +44,7 @@ rapid_flowsizetest: PacketsReceived: PacketsReceived PacketsLost: PacketsLost rapid_irqtest: - Core: Core - LessThan1us : B1 - LessThan5us : B5 - LessThan10us : B10 - LessThan50us : B50 - LessThan100us : B100 - LessThan500us : B500 - LessThan1ms : B1000 - LessThan5ms : B5000 - LessThan10ms : B10000 - LessThan50ms : B50000 - LessThan100ms : B100000 - LessThan500ms : B500000 - MoreThan500ms : BM500000 + Environment: environment_file + Test: test + Buckets: buckets + Machine_data: machine_data diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/increment_till_fail.test b/VNFs/DPPD-PROX/helper-scripts/rapid/increment_till_fail.test index 29e36bfd..d07876be 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/increment_till_fail.test +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/increment_till_fail.test @@ -44,11 +44,6 @@ warmuptime=2 [test2] test=increment_till_fail -# Following parameter defines the success criterium for the test. -# When this test uses multiple combinations of packet size and flows, -# all combinations must be meeting the same threshold -# The threshold is expressed in Mpps -pass_threshold=0.1 # Each element in the imix list will result in a separate test. Each element # is on its turn a list of packet sizes which will be used during one test # execution. If you only want to test 1 size, define a list with only one diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/ipv6.test b/VNFs/DPPD-PROX/helper-scripts/rapid/ipv6.test index b9f00f71..7dd586af 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/ipv6.test +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/ipv6.test @@ -45,12 +45,8 @@ warmuptime=2 [test2] test=flowsizetest -# Following parameter defines the success criterium for the test. -# When this test uses multiple combinations of packet size and flows, -# all combinations must be meeting the same threshold -# The threshold is expressed in Mpps -pass_threshold=0.1 -# DO NOT USE IMIX FOR IPV6 TESTING +# DO NOT USE IMIX FOR IPV6 TESTING. THE LIST OF IMIXS CAN ONLY CONTAIN LISTS +# WITH ONE ELEMENT!!! # PACKET SIZE NEEDS TO BE AT LEAST 84 (66 + 18) FOR IPV6 # 18 bytes needed for UDP LATENCY AND COUNTER CONTENT imixs=[[84],[250]] diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/l2framerate.test b/VNFs/DPPD-PROX/helper-scripts/rapid/l2framerate.test index e09b80f3..0c868006 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/l2framerate.test +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/l2framerate.test @@ -33,11 +33,6 @@ cores = [1] [test1] test=fixed_rate -# Following parameter defines the success criterium for the test. -# When this test uses multiple combinations of packet size and flows, -# all combinations must be meeting the same threshold -# The threshold is expressed in Mpps -pass_threshold=0.1 startspeed = 10 imixs=[[256]] flows=[64] diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/l2zeroloss.test b/VNFs/DPPD-PROX/helper-scripts/rapid/l2zeroloss.test index 2f61df56..bc1a1bca 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/l2zeroloss.test +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/l2zeroloss.test @@ -40,11 +40,6 @@ warmuptime=2 [test2] test=flowsizetest -# Following parameter defines the success criterium for the test. -# When this test uses multiple combinations of packet size and flows, -# all combinations must be meeting the same threshold -# The threshold is expressed in Mpps -pass_threshold=0.1 # Each element in the imix list will result in a separate test. Each element # is on its turn a list of packet sizes which will be used during one test # execution. If you only want to test 1 size, define a list with only one diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/l3framerate.test b/VNFs/DPPD-PROX/helper-scripts/rapid/l3framerate.test index 1d890d13..67a57ce7 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/l3framerate.test +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/l3framerate.test @@ -40,11 +40,6 @@ warmuptime=2 [test2] test=fixed_rate -# Following parameter defines the success criterium for the test. -# When this test uses multiple combinations of packet size and flows, -# all combinations must be meeting the same threshold -# The threshold is expressed in Mpps -pass_threshold=0.1 imixs=[[64],[128]] # the number of flows in the list need to be powers of 2, max 2^20 # If not a power of 2, we will use the lowest power of 2 that is larger than diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py b/VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py index 586731eb..5fc98db3 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/prox_ctrl.py @@ -183,9 +183,8 @@ class prox_sock(object): self._sock = sock self._rcvd = b'' - def quit(self): + def __del__(self): if self._sock is not None: - self._send('quit') self._sock.close() self._sock = None @@ -321,6 +320,9 @@ class prox_sock(object): self._send('set value %s %s %s %s %s' % (','.join(map(str, cores)), task, offset, value, length)) + def quit_prox(self): + self._send('quit') + def _send(self, cmd): """Append LF and send command to the PROX instance.""" if self._sock is None: diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_defaults.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_defaults.py index 404e6e32..e648c016 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_defaults.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_defaults.py @@ -21,7 +21,7 @@ class RapidDefaults(object): Class to define the test defaults """ test_params = { - 'version' : '2020.09.23', # Please do NOT change, used for debugging + 'version' : '2020.12.21', # Please do NOT change, used for debugging 'environment_file' : 'rapid.env', #Default string for environment 'test_file' : 'basicrapid.test', #Default string for test 'machine_map_file' : 'machine.map', #Default string for machine map file @@ -30,5 +30,6 @@ class RapidDefaults(object): 'runtime' : 10, # time in seconds for 1 test run 'configonly' : False, # If True, the system will upload all the necessary config fiels to the VMs, but not start PROX and the actual testing 'rundir' : '/opt/rapid', # Directory where to find the tools in the machines running PROX + 'resultsdir' : '.', # Directory where to store log files 'lat_percentile' : 0.99 } diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_flowsizetest.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_flowsizetest.py index c4308b1f..566e7cf7 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_flowsizetest.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_flowsizetest.py @@ -99,7 +99,7 @@ class FlowSizeTest(RapidTest): def run(self): result_details = {'Details': 'Nothing'} self.gen_machine.start_latency_cores() - TestPassed = True + TestResult = 0 for imix in self.test['imixs']: size = mean(imix) self.gen_machine.set_udp_packet_size(imix) @@ -122,7 +122,6 @@ class FlowSizeTest(RapidTest): self.set_background_flows(self.background_machines, flow_number) endspeed = None speed = self.get_start_speed_and_init(size) - self.record_start_time() while True: attempts += 1 endwarning = False @@ -164,7 +163,7 @@ class FlowSizeTest(RapidTest): if lat_warning or retry_warning: endwarning = '| | {:177.177} |'.format(retry_warning + lat_warning) success = True - TestPassed = False # fixed rate testing cannot be True, it is just reporting numbers every second + TestResult = TestResult + pps_rx # fixed rate testing result is strange: we just report the pps received speed_prefix = lat_avg_prefix = lat_perc_prefix = lat_max_prefix = abs_drop_rate_prefix = drop_rate_prefix = bcolors.ENDC # The following if statement is testing if we pass the success criteria of a certain drop rate, average latency and maximum latency below the threshold # The drop rate success can be achieved in 2 ways: either the drop rate is below a treshold, either we want that no packet has been lost during the test @@ -234,10 +233,7 @@ class FlowSizeTest(RapidTest): break elif self.resolution_achieved(): break - self.record_stop_time() if endspeed is not None: - if TestPassed and (endpps_rx < self.test['pass_threshold']): - TestPassed = False speed_prefix = lat_avg_prefix = lat_perc_prefix = lat_max_prefix = abs_drop_rate_prefix = drop_rate_prefix = bcolors.ENDC RapidLog.info(self.report_result(flow_number,size,endspeed,endpps_req_tx,endpps_tx,endpps_sut_tx,endpps_rx,endlat_avg,endlat_perc,endlat_perc_max,endlat_max,endabs_tx,endabs_rx,endabs_dropped,actual_duration,speed_prefix,lat_avg_prefix,lat_perc_prefix,lat_max_prefix,abs_drop_rate_prefix,drop_rate_prefix)) if endavg_bg_rate: @@ -248,10 +244,9 @@ class FlowSizeTest(RapidTest): RapidLog.info (endwarning) RapidLog.info("+--------+------------------+-------------+-------------+-------------+------------------------+----------+----------+----------+-----------+-----------+-----------+-----------+-------+----+") if self.test['test'] != 'fixed_rate': + TestResult = TestResult + endpps_rx result_details = {'test': self.test['testname'], 'environment_file': self.test['environment_file'], - 'start_date': self.start, - 'stop_date': self.stop, 'Flows': flow_number, 'Size': size, 'RequestedSpeed': RapidTest.get_pps(endspeed,size), @@ -271,4 +266,4 @@ class FlowSizeTest(RapidTest): else: RapidLog.info('|{:>7}'.format(str(flow_number))+" | Speed 0 or close to 0") self.gen_machine.stop_latency_cores() - return (TestPassed, result_details) + return (TestResult, result_details) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_generator_machine.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_generator_machine.py index 293720de..99cb361e 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_generator_machine.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_generator_machine.py @@ -49,7 +49,8 @@ class RapidGeneratorMachine(RapidMachine): """ Class to deal with a generator PROX instance (VM, bare metal, container) """ - def __init__(self, key, user, vim, rundir, machine_params, configonly, ipv6): + def __init__(self, key, user, vim, rundir, resultsdir, machine_params, + configonly, ipv6): mac_address_size = 6 ethertype_size = 2 FCS_size = 4 @@ -73,7 +74,8 @@ class RapidGeneratorMachine(RapidMachine): self.udp_dest_port_offset = udp_header_start_offset + 2 self.udp_length_offset = udp_header_start_offset + 4 self.ipv6 = ipv6 - super().__init__(key, user, vim, rundir, machine_params, configonly) + super().__init__(key, user, vim, rundir, resultsdir, machine_params, + configonly) def get_cores(self): return (self.machine_params['gencores'] + diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_irqtest.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_irqtest.py index 1afa0f19..f990a230 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_irqtest.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_irqtest.py @@ -34,16 +34,24 @@ class IrqTest(RapidTest): self.machines = machines def run(self): - RapidLog.info("+----------------------------------------------------------------------------------------------------------------------------") - RapidLog.info("| Measuring time probably spent dealing with an interrupt. Interrupting DPDK cores for more than 50us might be problematic ") - RapidLog.info("| and result in packet loss. The first row shows the interrupted time buckets: first number is the bucket between 0us and ") - RapidLog.info("| that number expressed in us and so on. The numbers in the other rows show how many times per second, the program was ") - RapidLog.info("| interrupted for a time as specified by its bucket. '0' is printed when there are no interrupts in this bucket throughout ") - RapidLog.info("| the duration of the test. 0.00 means there were interrupts in this bucket but very few. Due to rounding this shows as 0.00 ") - RapidLog.info("+----------------------------------------------------------------------------------------------------------------------------") + RapidLog.info("+----------------------------------------------------------------------------------------------------------------------------+") + RapidLog.info("| Measuring time probably spent dealing with an interrupt. Interrupting DPDK cores for more than 50us might be problematic |") + RapidLog.info("| and result in packet loss. The first row shows the interrupted time buckets: first number is the bucket between 0us and |") + RapidLog.info("| that number expressed in us and so on. The numbers in the other rows show how many times per second, the program was |") + RapidLog.info("| interrupted for a time as specified by its bucket. '0' is printed when there are no interrupts in this bucket throughout |") + RapidLog.info("| the duration of the test. 0.00 means there were interrupts in this bucket but very few. Due to rounding this shows as 0.00 |") + RapidLog.info("+----------------------------------------------------------------------------------------------------------------------------+") sys.stdout.flush() + max_loop_duration = 0 + machine_details = {} for machine in self.machines: buckets=machine.socket.show_irq_buckets(1) + if max_loop_duration == 0: + # First time we go through the loop, we need to initialize + # result_details + result_details = {'test': self.test['testname'], + 'environment_file': self.test['environment_file'], + 'buckets': buckets} print('Measurement ongoing ... ',end='\r') machine.start() # PROX cores will be started within 0 to 1 seconds # That is why we sleep a bit over 1 second to make sure all cores @@ -60,7 +68,7 @@ class IrqTest(RapidTest): old_irq[i][j] = machine.socket.irq_stats(irqcore,j) # Measurements in the loop above, are updated by PROX every second # This means that taking the same measurement 0.5 second later - # might results in the same data or data from the next 1s window + # might result in the same data or data from the next 1s window time.sleep(float(self.test['runtime'])) row_names = [] for i,irqcore in enumerate(machine.get_cores()): @@ -70,10 +78,13 @@ class IrqTest(RapidTest): if diff == 0: irq[i][j] = '0' else: - irq[i][j] = str(round(old_div(diff,float(self.test['runtime'])), 2)) + irq[i][j] = str(round(old_div(diff, + float(self.test['runtime'])), 2)) + if max_loop_duration < int(bucket): + max_loop_duration = int(bucket) # Measurements in the loop above, are updated by PROX every second # This means that taking the same measurement 0.5 second later - # might results in the same data or data from the next 1s window + # might result in the same data or data from the next 1s window # Conclusion: we don't know the exact window size. # Real measurement windows might be wrong by 1 second # This could be fixed in this script by checking this data every @@ -81,17 +92,15 @@ class IrqTest(RapidTest): # a longer time and decrease the error. The absolute number of # interrupts is not so important. machine.stop() + core_details = {} RapidLog.info('Results for PROX instance %s'%machine.name) - RapidLog.info('{:>12}'.format('bucket us') + ''.join(['{:>12}'.format(item) for item in column_names])) + RapidLog.info('{:>12}'.format('bucket us') + + ''.join(['{:>12}'.format(item) for item in column_names])) for j, row in enumerate(irq): - RapidLog.info('Core {:>7}'.format(row_names[j]) + ''.join(['{:>12}'.format(item) for item in row])) - variables = {} - variables['test'] = self.test['test'] - variables['environment_file'] = self.test['environment_file'] - variables['Machine'] = machine.name - for i,irqcore in enumerate(machine.get_cores()): - variables['Core'] = '{}'.format(row_names[i]) - for j,bucket in enumerate(buckets): - variables['B{}'.format(column_names[j].replace(">","M").replace("<","").replace(" ",""))] = irq[i][j] - self.post_data('rapid_irqtest', variables) - return (True, None) + RapidLog.info('Core {:>7}'.format(row_names[j]) + + ''.join(['{:>12}'.format(item) for item in row])) + core_details['Core {}'.format(row_names[j])] = row + machine_details[machine.name] = core_details + result_details['machine_data'] = machine_details + result_details = self.post_data('rapid_irqtest', result_details) + return (500000 - max_loop_duration, result_details) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_log.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_log.py index d1460f55..f453c574 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_log.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_log.py @@ -42,56 +42,67 @@ class RapidLog(object): @staticmethod def log_init(log_file, loglevel, screenloglevel, version): - # create formatters - screen_formatter = logging.Formatter("%(message)s") - file_formatter = logging.Formatter("%(asctime)s - %(levelname)s - %(message)s") - - # get a top-level logger, - # set its log level, - # BUT PREVENT IT from propagating messages to the root logger - # - log = logging.getLogger() - numeric_level = getattr(logging, loglevel.upper(), None) - if not isinstance(numeric_level, int): - raise ValueError('Invalid log level: %s' % loglevel) - log.setLevel(numeric_level) - log.propagate = 0 - - # create a console handler - # and set its log level to the command-line option - # - console_handler = logging.StreamHandler(sys.stdout) - #console_handler.setLevel(logging.INFO) - numeric_screenlevel = getattr(logging, screenloglevel.upper(), None) - if not isinstance(numeric_screenlevel, int): - raise ValueError('Invalid screenlog level: %s' % screenloglevel) - console_handler.setLevel(numeric_screenlevel) - console_handler.setFormatter(screen_formatter) - - # create a file handler - # and set its log level - # - file_handler = logging.handlers.RotatingFileHandler(log_file, backupCount=10) - #file_handler = log.handlers.TimedRotatingFileHandler(log_file, 'D', 1, 5) - file_handler.setLevel(numeric_level) - file_handler.setFormatter(file_formatter) - - # add handlers to the logger - # - log.addHandler(file_handler) - log.addHandler(console_handler) - - # Check if log exists and should therefore be rolled - needRoll = os.path.isfile(log_file) - - - # This is a stale log, so roll it - if needRoll: - # Add timestamp - log.debug('\n---------\nLog closed on %s.\n---------\n' % time.asctime()) - - # Roll over on application start - file_handler.doRollover() + log = logging.getLogger(__name__) + makeFileHandler = True + makeStreamHandler = True + if len(log.handlers) > 0: + for handler in log.handlers: + if isinstance(handler, logging.FileHandler): + makeFileHandler = False + elif isinstance(handler, logging.StreamHandler): + makeStreamHandler = False + if makeStreamHandler: + # create formatters + screen_formatter = logging.Formatter("%(message)s") + # create a console handler + # and set its log level to the command-line option + # + console_handler = logging.StreamHandler(sys.stdout) + #console_handler.setLevel(logging.INFO) + numeric_screenlevel = getattr(logging, screenloglevel.upper(), None) + if not isinstance(numeric_screenlevel, int): + raise ValueError('Invalid screenlog level: %s' % screenloglevel) + console_handler.setLevel(numeric_screenlevel) + console_handler.setFormatter(screen_formatter) + # add handler to the logger + # + log.addHandler(console_handler) + if makeFileHandler: + # create formatters + file_formatter = logging.Formatter("%(asctime)s - %(levelname)s - %(message)s") + # get a top-level logger, + # set its log level, + # BUT PREVENT IT from propagating messages to the root logger + # + numeric_level = getattr(logging, loglevel.upper(), None) + if not isinstance(numeric_level, int): + raise ValueError('Invalid log level: %s' % loglevel) + log.setLevel(numeric_level) + log.propagate = 0 + + + # create a file handler + # and set its log level + # + file_handler = logging.handlers.RotatingFileHandler(log_file, backupCount=10) + file_handler.setLevel(numeric_level) + file_handler.setFormatter(file_formatter) + + # add handler to the logger + # + log.addHandler(file_handler) + + # Check if log exists and should therefore be rolled + needRoll = os.path.isfile(log_file) + + + # This is a stale log, so roll it + if needRoll: + # Add timestamp + log.debug('\n---------\nLog closed on %s.\n---------\n' % time.asctime()) + + # Roll over on application start + file_handler.doRollover() # Add timestamp log.debug('\n---------\nLog started on %s.\n---------\n' % time.asctime()) @@ -100,6 +111,13 @@ class RapidLog(object): RapidLog.log = log @staticmethod + def log_close(): + for handler in RapidLog.log.handlers: + if isinstance(handler, logging.FileHandler): + handler.close() + RapidLog.log.removeHandler(handler) + + @staticmethod def exception(exception_info): RapidLog.log.exception(exception_info) raise Exception(exception_info) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_machine.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_machine.py index 8466c856..e47c1799 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_machine.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_machine.py @@ -24,12 +24,14 @@ class RapidMachine(object): """ Class to deal with a PROX instance (VM, bare metal, container) """ - def __init__(self, key, user, vim, rundir, machine_params, configonly): + def __init__(self, key, user, vim, rundir, resultsdir, machine_params, + configonly): self.name = machine_params['name'] self.ip = machine_params['admin_ip'] self.key = key self.user = user self.rundir = rundir + self.resultsdir = resultsdir self.dp_ports = [] self.dpdk_port_index = [] self.configonly = configonly @@ -44,13 +46,13 @@ class RapidMachine(object): index += 1 else: break - self.rundir = rundir self.machine_params = machine_params self.vim = vim def __del__(self): if ((not self.configonly) and self.machine_params['prox_socket']): - self._client.scp_get('/prox.log', './{}.prox.log'.format(self.name)) + self._client.scp_get('/prox.log', '{}/{}.prox.log'.format( + self.resultsdir, self.name)) def get_cores(self): return (self.machine_params['cores']) @@ -113,7 +115,7 @@ class RapidMachine(object): def close_prox(self): if (not self.configonly) and self.machine_params['prox_socket'] and self.machine_params['prox_launch_exit']: - self.socket.quit() + self.socket.quit_prox() def connect_prox(self): if self.machine_params['prox_socket']: diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_parser.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_parser.py index 29d87556..e5ed10d0 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_parser.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_parser.py @@ -73,7 +73,7 @@ class RapidConfigParser(object): elif option in ['startspeed', 'step', 'drop_rate_threshold', 'lat_avg_threshold','lat_perc_threshold', 'lat_max_threshold','accuracy','maxr','maxz', - 'pass_threshold','ramp_step']: + 'ramp_step']: test[option] = float(testconfig.get(section, option)) else: test[option] = testconfig.get(section, option) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_test.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_test.py index b89eb7bc..a54caba5 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_test.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid_test.py @@ -105,12 +105,6 @@ class RapidTest(object): if v in variables.keys(): data_format[k] = variables[v] - def record_start_time(self): - self.start = dt.now().strftime('%Y-%m-%d %H:%M:%S') - - def record_stop_time(self): - self.stop = dt.now().strftime('%Y-%m-%d %H:%M:%S') - def post_data(self, test, variables): var = copy.deepcopy(self.data_format) self.parse_data_format_dict(var, variables) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapidxt.py b/VNFs/DPPD-PROX/helper-scripts/rapid/rapidxt.py index b472f367..2a82df5c 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/rapidxt.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapidxt.py @@ -36,6 +36,7 @@ class RapidXt(testcase.TestCase): for key in kwargs: test_params[key] = kwargs[key] os.makedirs(self.res_dir, exist_ok=True) + test_params['resultsdir'] = self.res_dir log_file = '{}/RUN{}.{}.log'.format(self.res_dir, test_params['environment_file'], test_params['test_file']) RapidLog.log_init(log_file, test_params['loglevel'], @@ -43,9 +44,9 @@ class RapidXt(testcase.TestCase): test_manager = RapidTestManager() self.start_time = time.time() self.result, self.details = test_manager.run_tests(test_params) - self.result = 100 * self.result - RapidLog.info('Test result is : {}'.format(self.result)) self.stop_time = time.time() + RapidLog.log_close() + except Exception: # pylint: disable=broad-except print("Unexpected error:", sys.exc_info()[0]) self.result = 0 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py b/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py index 44f33c06..3bdb91d1 100755 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py @@ -62,8 +62,8 @@ class RapidTestManager(object): if 'gencores' in machine_params.keys(): machine = RapidGeneratorMachine(test_params['key'], test_params['user'], test_params['vim_type'], - test_params['rundir'], machine_params, - configonly, test_params['ipv6']) + test_params['rundir'], test_params['resultsdir'], + machine_params, configonly, test_params['ipv6']) if machine_params['monitor']: if monitor_gen: RapidLog.exception("Can only monitor 1 generator") @@ -76,7 +76,7 @@ class RapidTestManager(object): else: machine = RapidMachine(test_params['key'], test_params['user'], test_params['vim_type'], test_params['rundir'], - machine_params, configonly) + test_params['resultsdir'], machine_params, configonly) if machine_params['monitor']: if monitor_sut: RapidLog.exception("Can only monitor 1 sut") @@ -94,7 +94,7 @@ class RapidTestManager(object): with concurrent.futures.ThreadPoolExecutor(max_workers=len(self.machines)) as executor: future_to_connect_prox = {executor.submit(machine.connect_prox): machine for machine in self.machines} concurrent.futures.wait(future_to_connect_prox,return_when=ALL_COMPLETED) - result = True + result = 0 for test_param in test_params['tests']: RapidLog.info(test_param['test']) if test_param['test'] in ['flowsizetest', 'TST009test', @@ -128,8 +128,10 @@ class RapidTestManager(object): RapidLog.debug('Test name ({}) is not valid:'.format( test_param['test'])) single_test_result, result_details = test.run() - if not single_test_result: - result = False + result = result + single_test_result + for machine in self.machines: + machine.close_prox() + concurrent.futures.wait(self.future_to_prox,return_when=ALL_COMPLETED) return (result, result_details) def main(): @@ -145,7 +147,7 @@ def main(): test_params['screenloglevel'] , test_params['version'] ) test_manager = RapidTestManager() test_result, _ = test_manager.run_tests(test_params) - RapidLog.info('Test result is : {}'.format(test_result)) + RapidLog.log_close() if __name__ == "__main__": main() diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/xtesting/Dockerfile b/VNFs/DPPD-PROX/helper-scripts/rapid/xtesting/Dockerfile index b7bced8d..299f8ef3 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/xtesting/Dockerfile +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/xtesting/Dockerfile @@ -24,7 +24,6 @@ RUN git clone https://git.opnfv.org/samplevnf /samplevnf WORKDIR /samplevnf/VNFs/DPPD-PROX/helper-scripts/rapid COPY rapid.env /samplevnf/VNFs/DPPD-PROX/helper-scripts/rapid/. COPY rapid_key.pem /samplevnf/VNFs/DPPD-PROX/helper-scripts/rapid/. -COPY TST009_Throughput_64B_64F.test /samplevnf/VNFs/DPPD-PROX/helper-scripts/rapid/. COPY testcases.yaml /usr/lib/python3.8/site-packages/xtesting/ci/testcases.yaml RUN apk add python3-dev openssh-client && cd /samplevnf/VNFs/DPPD-PROX/helper-scripts/rapid/ && git init && pip3 install . CMD ["run_tests", "-t", "all"] diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/xtesting/testcases.yaml b/VNFs/DPPD-PROX/helper-scripts/rapid/xtesting/testcases.yaml index 2db064f2..38ba1314 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/xtesting/testcases.yaml +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/xtesting/testcases.yaml @@ -1,18 +1,51 @@ --- tiers: - - name: rapid + name: IRQ_rapid_benchmarking order: 1 - description: 'Rapid Testing' + description: 'IRQ Rapid Testing' testcases: - - case_name: rapid_tst009 + case_name: rapid_irq project_name: rapidxt - criteria: 100 + criteria: 499500 + # Criterium for irq is defined as 500000 - the maximal allowed interrupt time per PMD loop (in us) + blocking: true + clean_flag: false + description: 'IRQ test' + run: + name: rapidxt + args: + test_file: irq.test + runtime: 5 + - + name: TST009_rapid_benchmarking + order: 2 + description: 'TST009 Rapid Testing' + testcases: + - + case_name: rapid_tst009_64b_64f + project_name: rapidxt + criteria: 0.5 + # Criterium for TST009 testing is defined as the minimum packets per second received in the generator, expressed in Mpps blocking: true clean_flag: false description: 'TST009 test, 64 byte packets, 64 flows' run: name: rapidxt args: - test_file: TST009_Throughput_64B_64F.test + test_file: TST009_Throughput_64B_64F.test + runtime: 5 + - + case_name: rapid_tst009_acaeab_16384f + project_name: rapidxt + criteria: 0.2 + # Criterium for TST009 testing is defined as the minimum packets per second received in the generator, expressed in Mpps + blocking: true + clean_flag: false + description: 'TST009 test, imix acaeab, 16384 flows' + run: + name: rapidxt + args: + test_file: TST009_Throughput_acaeab_16384F.test + runtime: 5 |