diff options
Diffstat (limited to 'VNFs/DPPD-PROX/helper-scripts')
26 files changed, 1251 insertions, 95 deletions
diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/Dockerfile b/VNFs/DPPD-PROX/helper-scripts/rapid/Dockerfile new file mode 100644 index 00000000..9f2161fe --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/Dockerfile @@ -0,0 +1,54 @@ +## +## Copyright (c) 2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +################################################## +# Build all components in separate builder image # +################################################## +FROM centos:7 as builder + +ARG BUILD_DIR=/opt/rapid + +COPY ./port_info ${BUILD_DIR}/port_info + +COPY ./deploycentostools.sh ${BUILD_DIR}/ +RUN chmod +x ${BUILD_DIR}/deploycentostools.sh \ + && ${BUILD_DIR}/deploycentostools.sh -k deploy + +############################# +# Create slim runtime image # +############################# +FROM centos:7 + +ARG BUILD_DIR=/opt/rapid + +COPY ./deploycentostools.sh ${BUILD_DIR}/ +COPY --from=builder ${BUILD_DIR}/install_components.tgz ${BUILD_DIR}/install_components.tgz + +RUN chmod +x ${BUILD_DIR}/deploycentostools.sh \ + && ${BUILD_DIR}/deploycentostools.sh -k runtime_image + +# Expose SSH and PROX ports +EXPOSE 22 8474 + +# Copy SSH keys +COPY ./rapid_rsa_key.pub /home/centos/.ssh/authorized_keys +COPY ./rapid_rsa_key.pub /root/.ssh/authorized_keys + +# Copy startup script +COPY ./start.sh /start.sh +RUN chmod +x /start.sh + +ENTRYPOINT ["/start.sh"] diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/README.k8s b/VNFs/DPPD-PROX/helper-scripts/rapid/README.k8s new file mode 100644 index 00000000..e1abbe75 --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/README.k8s @@ -0,0 +1,94 @@ +## +## Copyright (c) 2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +############################################################################### +# REQUIREMENTS # +############################################################################### +1. Working Kubernetes cluster. It can be set up using Intel Container Bare +Metal Reference Architecture https://github.com/intel/container-experience-kits + +2. 1024x 2M hugepages must be configured on the nodes + +3. SRIOV Network Device Plugin for Kubernetes installed +https://github.com/intel/sriov-network-device-plugin. + +4. SRIOV VFs configured and rebind to the vfio-pci module +As an example, SRIOV VFs (rebind to the vfio-pci driver) pool is named as +intel.com/intel_sriov_vfio. + +Network attachment definition is named as +k8s.v1.cni.cncf.io/networks: intel-sriov-vfio. + +5. PROX image created and pushed to the local registry or distributed and +loaded on all of the testing nodes. + +############################################################################### +# PROX IMAGE BUILD # +############################################################################### +Run +# dockerimage.sh build +to build PROX image. + +After the successfull build prox.tar will be created and can be used to load +image on the k8s nodes or it can be pushed to the local repository using +# dockerimage.sh push + +############################################################################### +# TESTING # +############################################################################### +1. Edit rapidpods file and set the right name (nodeSelector_hostname) for the +nodes on which you want to execute test PODs. + +# kubectl get nodes -o wide +NAME STATUS ROLES AGE VERSION INTERNAL-IP EXTERNAL-IP OS-IMAGE KERNEL-VERSION CONTAINER-RUNTIME +k8s-master1 Ready master 7d13h v1.13.5 10.10.0.10 <none> CentOS Linux 7 (Core) 3.10.0-1062.4.1.el7.x86_64 docker://18.6.2 +k8s-node1 Ready node 7d13h v1.13.5 10.10.0.12 <none> CentOS Linux 7 (Core) 3.10.0-1062.4.1.el7.x86_64 docker://18.6.2 +k8s-node2 Ready node 7d13h v1.13.5 10.10.0.13 <none> CentOS Linux 7 (Core) 3.10.0-1062.4.1.el7.x86_64 docker://18.6.2 + +Set the right IP addresses (dp_ip) to use by the PODs for the Dataplane network. + +2. Edit pod-rapid.yaml file and set correct + - image name (image: localhost:5000/prox:latest) + - network attachment definition in metadata->annotation section + (k8s.v1.cni.cncf.io/networks: intel-sriov-vfio) + - SRIOV VFs resources attached to the vfio-pci driver + (intel.com/intel_sriov_vfio: '1') + +3. Copy SSH private key in the rapid_rsa_key file + +4. Run createrapidk8s.py to create test PODs according to the configuration from +rapid.pods file. + +# ./createrapidk8s.py + +Check for rapid PODs. They should be up and running. + +# kubectl get pods -o wide +NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES +pod-rapid-1 1/1 Running 0 18h 10.244.2.87 k8s-node1 <none> <none> +pod-rapid-2 1/1 Running 0 18h 10.244.1.40 k8s-node2 <none> <none> +pod-rapid-3 1/1 Running 0 18h 10.244.1.39 k8s-node2 <none> <none> + +5. Run test case. + +# ./runrapid.py --test basicrapid.test + +############################################################################### +# NOTES # +############################################################################### +If layer 2 tests are planned to be executed MAC adresses must be +preconfigured for the SRIOV VFs to avoid issues with randomly generated MACs +each time when the PROX starts. diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/centos.json b/VNFs/DPPD-PROX/helper-scripts/rapid/centos.json index 066f0ea4..92617b86 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/centos.json +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/centos.json @@ -38,7 +38,9 @@ }, { "type": "shell", - "script": "deploycentostools.sh" + "inline": [ + "chmod a+x /home/centos/deploycentostools.sh", + "/home/centos/deploycentostools.sh -u deploy" ] } ] } diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/createrapid.py b/VNFs/DPPD-PROX/helper-scripts/rapid/createrapid.py index ccb500aa..a7b1ec6c 100755 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/createrapid.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/createrapid.py @@ -264,14 +264,14 @@ cmd = 'openstack keypair list -f value -c Name' log.debug (cmd) KeyExist = subprocess.check_output(cmd , shell=True).decode().strip() if key in KeyExist: - log.info("Key ("+key+") already installed") + log.info("Key (" + key + ") already installed") else: log.info('Creating key ...') - cmd = 'openstack keypair create '+ key + '>' +key+'.pem' + cmd = 'openstack keypair create ' + key + '>' + key + '.pem' log.debug(cmd) subprocess.check_call(cmd , shell=True) - cmd = 'chmod 600 ' +key+'.pem' - subprocess.check_call(cmd , shell=True) + cmd = 'chmod 600 ' + key + '.pem' + subprocess.check_call(cmd, shell=True) cmd = 'openstack keypair list -f value -c Name' log.debug(cmd) KeyExist = subprocess.check_output(cmd , shell=True).decode().strip() @@ -388,7 +388,7 @@ for vm in range(1, int(total_number_of_VMs)+1): log.info('%s: (admin IP: %s), (dataplane IP: %s), (dataplane MAC: %s)' % (ServerName[vm-1],vmAdminIP,vmDPIP,vmDPmac)) config.add_section('ssh') -config.set('ssh', 'key', key+'.pem') +config.set('ssh', 'key', key + '.pem') config.set('ssh', 'user', 'centos') config.add_section('Varia') config.set('Varia', 'VIM', 'OpenStack') diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/createrapidk8s.py b/VNFs/DPPD-PROX/helper-scripts/rapid/createrapidk8s.py new file mode 100755 index 00000000..e096c82e --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/createrapidk8s.py @@ -0,0 +1,37 @@ +#!/usr/bin/env python2.7 + +## +## Copyright (c) 2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +from k8sdeployment import K8sDeployment + +# Config file name for deployment creation +CREATE_CONFIG_FILE_NAME = "rapid.pods" + +# Config file name for runrapid script +RUN_CONFIG_FILE_NAME = "rapid.env" + +# Create a new deployment +deployment = K8sDeployment() + +# Load config file with test environment description +deployment.load_create_config(CREATE_CONFIG_FILE_NAME) + +# Create PODs for test +deployment.create_pods() + +# Save config file for runrapid script +deployment.save_runtime_config(RUN_CONFIG_FILE_NAME) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/deploycentostools.sh b/VNFs/DPPD-PROX/helper-scripts/rapid/deploycentostools.sh index 1d260d61..5e2cf3d1 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/deploycentostools.sh +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/deploycentostools.sh @@ -15,10 +15,12 @@ ## limitations under the License. ## +# Directory for package build BUILD_DIR="/opt/rapid" -WORK_DIR="/home/centos" # Directory where the packer tool has copied some files (e.g. check_prox_system_setup.sh) - # Runtime scripts are assuming ${WORK_DIR} as the directory for PROX. Check the rundir variable in runrapid.py. Should be the same! - # This variable is defined in 4 different places and should have the same value: centos.json, deploycentos.sh, check_prox_system_setup.sh and runrapid.py +# Directory where the packer tool has copied some files (e.g. check_prox_system_setup.sh) +# Runtime scripts are assuming ${WORK_DIR} as the directory for PROX. Check the rundir variable in runrapid.py. Should be the same! +# This variable is defined in 4 different places and should have the same value: centos.json, deploycentostools.sh, check_prox_system_setup.sh and runrapid.py +WORK_DIR="/home/centos" DPDK_VERSION="19.05" PROX_COMMIT="b71a4cfd" PROX_CHECKOUT="git checkout ${PROX_COMMIT}" @@ -29,22 +31,42 @@ MULTI_BUFFER_LIB_VER="0.52" export RTE_SDK="${BUILD_DIR}/dpdk-${DPDK_VERSION}" export RTE_TARGET="x86_64-native-linuxapp-gcc" +# By default, do not update OS +OS_UPDATE="n" +# By default, asumming that we are in the VM +K8S_ENV="n" + +# If already running from root, no need for sudo +SUDO="" +[ $(id -u) -ne 0 ] && SUDO="sudo" + function os_pkgs_install() { - sudo yum install -y deltarpm yum-utils + ${SUDO} yum install -y deltarpm yum-utils + # NASM repository for AESNI MB library - sudo yum-config-manager --add-repo http://www.nasm.us/nasm.repo + ${SUDO} yum-config-manager --add-repo http://www.nasm.us/nasm.repo - sudo yum update -y - sudo yum install -y git wget gcc unzip libpcap-devel ncurses-devel \ + [ "${OS_UPDATE}" == "y" ] && ${SUDO} yum update -y + ${SUDO} yum install -y git wget gcc unzip libpcap-devel ncurses-devel \ libedit-devel lua-devel kernel-devel iperf3 pciutils \ - numactl-devel vim tuna openssl-devel nasm wireshark + numactl-devel vim tuna openssl-devel nasm wireshark \ + make +} + +function k8s_os_pkgs_runtime_install() +{ + [ "${OS_UPDATE}" == "y" ] && ${SUDO} yum update -y + + # Install required dynamically linked libraries + required packages + ${SUDO} yum install -y numactl-libs libpcap openssh openssh-server \ + openssh-clients sudo } function os_cfg() { # huge pages to be used by DPDK - sudo sh -c '(echo "vm.nr_hugepages = 1024") > /etc/sysctl.conf' + ${SUDO} sh -c '(echo "vm.nr_hugepages = 1024") > /etc/sysctl.conf' # Enabling tuned with the realtime-virtual-guest profile pushd ${BUILD_DIR} > /dev/null 2>&1 @@ -52,26 +74,44 @@ function os_cfg() wget http://linuxsoft.cern.ch/cern/centos/7/rt/x86_64/Packages/tuned-profiles-nfv-guest-2.8.0-5.el7_4.2.noarch.rpm # Install with --nodeps. The latest CentOS cloud images come with a tuned version higher than 2.8. These 2 packages however # do not depend on v2.8 and also work with tuned 2.9. Need to be careful in the future - sudo rpm -ivh ${BUILD_DIR}/tuned-profiles-realtime-2.8.0-5.el7_4.2.noarch.rpm --nodeps - sudo rpm -ivh ${BUILD_DIR}/tuned-profiles-nfv-guest-2.8.0-5.el7_4.2.noarch.rpm --nodeps + ${SUDO} rpm -ivh ${BUILD_DIR}/tuned-profiles-realtime-2.8.0-5.el7_4.2.noarch.rpm --nodeps + ${SUDO} rpm -ivh ${BUILD_DIR}/tuned-profiles-nfv-guest-2.8.0-5.el7_4.2.noarch.rpm --nodeps # Although we do no know how many cores the VM will have when begin deployed for real testing, we already put a number for the # isolated CPUs so we can start the realtime-virtual-guest profile. If we don't, that command will fail. # When the VM will be instantiated, the check_kernel_params service will check for the real number of cores available to this VM # and update the realtime-virtual-guest-variables.conf accordingly. - echo "isolated_cores=1" | sudo tee -a /etc/tuned/realtime-virtual-guest-variables.conf - sudo tuned-adm profile realtime-virtual-guest + echo "isolated_cores=1" | ${SUDO} tee -a /etc/tuned/realtime-virtual-guest-variables.conf + ${SUDO} tuned-adm profile realtime-virtual-guest # Install the check_tuned_params service to make sure that the grub cmd line has the right cpus in isolcpu. The actual number of cpu's # assigned to this VM depends on the flavor used. We don't know at this time what that will be. - sudo chmod +x ${WORK_DIR}/check_prox_system_setup.sh - sudo cp -r ${WORK_DIR}/check_prox_system_setup.sh /usr/local/libexec/ - sudo cp -r ${WORK_DIR}/check-prox-system-setup.service /etc/systemd/system/ - sudo systemctl daemon-reload - sudo systemctl enable check-prox-system-setup.service + ${SUDO} chmod +x ${WORK_DIR}/check_prox_system_setup.sh + ${SUDO} cp -r ${WORK_DIR}/check_prox_system_setup.sh /usr/local/libexec/ + ${SUDO} cp -r ${WORK_DIR}/check-prox-system-setup.service /etc/systemd/system/ + ${SUDO} systemctl daemon-reload + ${SUDO} systemctl enable check-prox-system-setup.service popd > /dev/null 2>&1 } +function k8s_os_cfg() +{ + [ ! -f /etc/ssh/ssh_host_rsa_key ] && ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N '' + [ ! -f /etc/ssh/ssh_host_ecdsa_key ] && ssh-keygen -t ecdsa -f /etc/ssh/ssh_host_ecdsa_key -N '' + [ ! -f /etc/ssh/ssh_host_ed25519_key ] && ssh-keygen -t ed25519 -f /etc/ssh/ssh_host_ed25519_key -N '' + + [ ! -d /var/run/sshd ] && mkdir -p /var/run/sshd + + USER_NAME="centos" + USER_PWD="centos" + + useradd -m -d /home/${USER_NAME} -s /bin/bash -U ${USER_NAME} + echo "${USER_NAME}:${USER_PWD}" | chpasswd + usermod -aG wheel ${USER_NAME} + + echo "%wheel ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/wheelnopass +} + function mblib_install() { export AESNI_MULTI_BUFFER_LIB_PATH="${BUILD_DIR}/intel-ipsec-mb-${MULTI_BUFFER_LIB_VER}" @@ -82,7 +122,7 @@ function mblib_install() unzip v${MULTI_BUFFER_LIB_VER}.zip pushd ${AESNI_MULTI_BUFFER_LIB_PATH} make -j`getconf _NPROCESSORS_ONLN` - sudo make install + ${SUDO} make install popd > /dev/null 2>&1 popd > /dev/null 2>&1 } @@ -99,15 +139,23 @@ function dpdk_install() tar -xf ./dpdk-${DPDK_VERSION}.tar.xz popd > /dev/null 2>&1 - sudo ln -s ${RTE_SDK} ${WORK_DIR}/dpdk + ${SUDO} ln -s ${RTE_SDK} ${WORK_DIR}/dpdk pushd ${RTE_SDK} > /dev/null 2>&1 make config T=${RTE_TARGET} # The next sed lines make sure that we can compile DPDK 17.11 with a relatively new OS. Using a newer DPDK (18.5) should also resolve this issue - #sudo sed -i '/CONFIG_RTE_LIBRTE_KNI=y/c\CONFIG_RTE_LIBRTE_KNI=n' ${RTE_SDK}/build/.config - #sudo sed -i '/CONFIG_RTE_LIBRTE_PMD_KNI=y/c\CONFIG_RTE_LIBRTE_PMD_KNI=n' ${RTE_SDK}/build/.config - #sudo sed -i '/CONFIG_RTE_KNI_KMOD=y/c\CONFIG_RTE_KNI_KMOD=n' ${RTE_SDK}/build/.config - #sudo sed -i '/CONFIG_RTE_KNI_PREEMPT_DEFAULT=y/c\CONFIG_RTE_KNI_PREEMPT_DEFAULT=n' ${RTE_SDK}/build/.config + #${SUDO} sed -i '/CONFIG_RTE_LIBRTE_KNI=y/c\CONFIG_RTE_LIBRTE_KNI=n' ${RTE_SDK}/build/.config + #${SUDO} sed -i '/CONFIG_RTE_LIBRTE_PMD_KNI=y/c\CONFIG_RTE_LIBRTE_PMD_KNI=n' ${RTE_SDK}/build/.config + #${SUDO} sed -i '/CONFIG_RTE_KNI_KMOD=y/c\CONFIG_RTE_KNI_KMOD=n' ${RTE_SDK}/build/.config + #${SUDO} sed -i '/CONFIG_RTE_KNI_PREEMPT_DEFAULT=y/c\CONFIG_RTE_KNI_PREEMPT_DEFAULT=n' ${RTE_SDK}/build/.config + + # For Kubernetes environment we use host vfio module + if [ "${K8S_ENV}" == "y" ]; then + sed -i 's/CONFIG_RTE_EAL_IGB_UIO=y/CONFIG_RTE_EAL_IGB_UIO=n/g' ${RTE_SDK}/build/.config + sed -i 's/CONFIG_RTE_LIBRTE_KNI=y/CONFIG_RTE_LIBRTE_KNI=n/g' ${RTE_SDK}/build/.config + sed -i 's/CONFIG_RTE_KNI_KMOD=y/CONFIG_RTE_KNI_KMOD=n/g' ${RTE_SDK}/build/.config + fi + # Compile with MB library sed -i '/CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n/c\CONFIG_RTE_LIBRTE_PMD_AESNI_MB=y' ${RTE_SDK}/build/.config make -j`getconf _NPROCESSORS_ONLN` @@ -128,23 +176,125 @@ function prox_install() # Clone and compile PROX pushd ${BUILD_DIR} > /dev/null 2>&1 git clone https://git.opnfv.org/samplevnf - pushd ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX + pushd ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX > /dev/null 2>&1 ${PROX_CHECKOUT} popd > /dev/null 2>&1 prox_compile - sudo ln -s ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX ${WORK_DIR}/prox + ${SUDO} cp ${BUILD_DIR}/samplevnf/VNFs/DPPD-PROX/build/app/prox ${WORK_DIR}/prox + popd > /dev/null 2>&1 +} + +function port_info_build() +{ + [ ! -d ${BUILD_DIR}/port_info ] && echo "Skipping port_info compilation..." && return + + pushd ${BUILD_DIR}/port_info > /dev/null 2>&1 + make + ${SUDO} cp ${BUILD_DIR}/port_info/build/app/port_info ${WORK_DIR}/port_info popd > /dev/null 2>&1 } -if [ "$1" == "compile" ]; then +function create_minimal_install() +{ + ldd ${WORK_DIR}/prox | awk '{ if ($(NF-1) != "=>") print $(NF-1) }' >> ${BUILD_DIR}/list_of_install_components + + echo "${WORK_DIR}/prox" >> ${BUILD_DIR}/list_of_install_components + echo "${WORK_DIR}/port_info" >> ${BUILD_DIR}/list_of_install_components + + tar -czvhf ${BUILD_DIR}/install_components.tgz -T ${BUILD_DIR}/list_of_install_components +} + +function cleanup() +{ + ${SUDO} yum autoremove -y + ${SUDO} yum clean all + ${SUDO} rm -rf /var/cache/yum +} + +function k8s_runtime_image() +{ + k8s_os_pkgs_runtime_install + k8s_os_cfg + cleanup + + pushd / > /dev/null 2>&1 + tar -xvf ${BUILD_DIR}/install_components.tgz --skip-old-files + popd > /dev/null 2>&1 + + ldconfig + + #rm -rf ${BUILD_DIR}/install_components.tgz +} + +function print_usage() +{ + echo "Usage: ${0} [OPTIONS] [COMMAND]" + echo "Options:" + echo " -u, --update Full OS update" + echo " -k, --kubernetes Build for Kubernetes environment" + echo "Commands:" + echo " deploy Run through all deployment steps" + echo " compile PROX compile only" + echo " runtime_image Apply runtime configuration only" +} + +COMMAND="" +# Parse options and comman +for opt in "$@"; do + case ${opt} in + -u|--update) + echo 'Full OS update will be done!' + OS_UPDATE="y" + ;; + -k|--kubernetes) + echo "Kubernetes environment is set!" + K8S_ENV="y" + ;; + compile) + COMMAND="compile" + ;; + runtime_image) + COMMAND="runtime_image" + ;; + deploy) + COMMAND="deploy" + ;; + *) + echo "Unknown option/command ${opt}" + print_usage + exit 1 + ;; + esac +done + +if [ "${COMMAND}" == "compile" ]; then + echo "PROX compile only..." prox_compile -else - [ ! -d ${BUILD_DIR} ] && sudo mkdir -p ${BUILD_DIR} - sudo chmod 0777 ${BUILD_DIR} +elif [ "${COMMAND}" == "runtime_image" ]; then + echo "Runtime image intallation and configuration..." + k8s_runtime_image +elif [ "${COMMAND}" == "deploy" ]; then + [ ! -d ${BUILD_DIR} ] && ${SUDO} mkdir -p ${BUILD_DIR} + ${SUDO} chmod 0777 ${BUILD_DIR} os_pkgs_install - os_cfg + + if [ "${K8S_ENV}" == "y" ]; then + k8s_os_cfg + else + os_cfg + fi + mblib_install dpdk_install prox_install + + if [ "${K8S_ENV}" == "y" ]; then + port_info_build + create_minimal_install + fi + + cleanup +else + print_usage fi diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/dockerimage.sh b/VNFs/DPPD-PROX/helper-scripts/rapid/dockerimage.sh new file mode 100755 index 00000000..3d77aaed --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/dockerimage.sh @@ -0,0 +1,95 @@ +#!/usr/bin/env bash +## +## Copyright (c) 2010-2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +PROX_DEPLOY_DIR="." +PROX_IMAGE_NAME="prox_slim" +RSA_KEY_FILE_NAME="rapid_rsa_key" + +DOCKERFILE="Dockerfile" +DOCKER_REGISTRY="localhost:5000" + +USE_DOCKER_CACHE="n" + +function create_ssh_key() +{ + if [ -f ./${RSA_KEY_FILE_NAME} ]; then + read -p "RSA key already exist! Do you want to remove it (yYnN)?" -n 1 -r + + if [ "$REPLY" == "y" ] || [ "$REPLY" == "Y" ]; then + echo "Removing existing key..." + sleep 3 + + [ -f "./${RSA_KEY_FILE_NAME}" ] && rm -rf ./${RSA_KEY_FILE_NAME} + [ -f "./${RSA_KEY_FILE_NAME}.pub" ] && rm -rf ./${RSA_KEY_FILE_NAME}.pub + else + echo "Using existing key..." + return + fi + fi + + echo "Generating new RSA key..." + ssh-keygen -t rsa -b 4096 -N "" -f ./${RSA_KEY_FILE_NAME} +} + +function build_prox_image() +{ + if [ "${USE_DOCKER_CACHE}" == "y" ]; then + echo "Building image using cache..." + docker build --rm -t ${PROX_IMAGE_NAME}:latest -f ${DOCKERFILE} ${PROX_DEPLOY_DIR} + else + echo "Building image without cache..." + docker build --no-cache --rm -t ${PROX_IMAGE_NAME}:latest -f ${DOCKERFILE} ${PROX_DEPLOY_DIR} + fi +} + +function save_prox_image() +{ + echo "Saving image ${PROX_IMAGE_NAME}:latest to ./${PROX_IMAGE_NAME}.tar" + docker save -o ./${PROX_IMAGE_NAME}.tar ${PROX_IMAGE_NAME}:latest +} + +function load_prox_image() +{ + echo "Loading image ./${PROX_IMAGE_NAME}.tar" + docker load -i ./${PROX_IMAGE_NAME}.tar +} + +function push_prox_image() +{ + docker tag ${PROX_IMAGE_NAME}:latest ${DOCKER_REGISTRY}/${PROX_IMAGE_NAME} + docker push ${DOCKER_REGISTRY}/${PROX_IMAGE_NAME} +} + +function print_help() +{ + echo "${0}: [build|load|push]" + echo " build: build and save image ${PROX_IMAGE_NAME}:latest using ${DOCKERFILE}" + echo " load: load saved image from ${PROX_IMAGE_NAME}.tar file in the local registry" + echo " push: tag and push local ${PROX_IMAGE_NAME}:latest image in the ${DOCKER_REGISTRY}/${PROX_IMAGE_NAME} registry" +} + +if [ "$1" == "build" ]; then + create_ssh_key + build_prox_image + save_prox_image +elif [ "$1" == "load" ]; then + load_prox_image +elif [ "$1" == "push" ]; then + push_prox_image +else + print_help +fi diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/gen.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/gen.cfg index 775eef9a..4944f017 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/gen.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/gen.cfg @@ -14,12 +14,13 @@ ;; limitations under the License. ;; +[lua] +dofile("parameters.lua") + [eal options] -n=4 ; force number of memory channels no-output=no ; disable DPDK debug output - -[lua] -dofile("parameters.lua") +eal=--proc-type auto ${eal} [port 0] name=p0 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/gen_gw.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/gen_gw.cfg index c79e144a..b4843acf 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/gen_gw.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/gen_gw.cfg @@ -14,12 +14,13 @@ ;; limitations under the License. ;; +[lua] +dofile("parameters.lua") + [eal options] -n=4 ; force number of memory channels no-output=no ; disable DPDK debug output - -[lua] -dofile("parameters.lua") +eal=--proc-type auto ${eal} [port 0] name=p0 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/impair.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/impair.cfg index 8e86c8e1..183fe77b 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/impair.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/impair.cfg @@ -14,12 +14,13 @@ ;; limitations under the License. ;; +[lua] +dofile("parameters.lua") + [eal options] -n=4 ; force number of memory channels no-output=no ; disable DPDK debug output - -[lua] -dofile("parameters.lua") +eal=--proc-type auto ${eal} [port 0] name=if0 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/irq.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/irq.cfg index 8c1331e9..4e9af96b 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/irq.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/irq.cfg @@ -14,12 +14,13 @@ ;; limitations under the License. ;; +[lua] +dofile("parameters.lua") + [eal options] -n=4 ; force number of memory channels no-output=no ; disable DPDK debug output - -[lua] -dofile("parameters.lua") +eal=--proc-type auto ${eal} [;port 0] name=p0 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/k8sdeployment.py b/VNFs/DPPD-PROX/helper-scripts/rapid/k8sdeployment.py new file mode 100644 index 00000000..caf2d2e2 --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/k8sdeployment.py @@ -0,0 +1,196 @@ +#!/usr/bin/env python2.7 + +## +## Copyright (c) 2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +import sys +from kubernetes import client, config +import ConfigParser +import logging +from logging import handlers + +from pod import Pod + +class K8sDeployment: + """Deployment class to create containers for test execution in Kubernetes + environment. + """ + LOG_FILE_NAME = "createrapidk8s.log" + SSH_PRIVATE_KEY = "./rapid_rsa_key" + SSH_USER = "centos" + + POD_YAML_TEMPLATE_FILE_NAME = "pod-rapid.yaml" + + _log = None + _create_config = None + _runtime_config = None + _total_number_of_pods = 0 + _pods = [] + + def __init__(self): + # Configure logger + self._log = logging.getLogger("k8srapid") + self._log.setLevel(logging.DEBUG) + + console_formatter = logging.Formatter("%(message)s") + console_handler = logging.StreamHandler(sys.stdout) + console_handler.setLevel(logging.DEBUG) + console_handler.setFormatter(console_formatter) + + file_formatter = logging.Formatter("%(asctime)s - " + "%(levelname)s - " + "%(message)s") + file_handler = logging.handlers.RotatingFileHandler(self.LOG_FILE_NAME, + backupCount=10) + file_handler.setLevel(logging.DEBUG) + file_handler.setFormatter(file_formatter) + + self._log.addHandler(file_handler) + self._log.addHandler(console_handler) + + # Initialize k8s plugin + config.load_kube_config() + Pod.k8s_CoreV1Api = client.CoreV1Api() + + def load_create_config(self, config_file_name): + """Read and parse configuration file for the test environment. + """ + self._log.info("Loading configuration file %s", config_file_name) + self._create_config = ConfigParser.RawConfigParser() + try: + self._create_config.read(config_file_name) + except Exception as e: + self._log.error("Failed to read config file!\n%s\n" % e) + return -1 + + # Now parse config file content + # Parse [DEFAULT] section + if self._create_config.has_option("DEFAULT", "total_number_of_pods"): + self._total_number_of_pods = self._create_config.getint( + "DEFAULT", "total_number_of_pods") + else: + self._log.error("No option total_number_of_pods in DEFAULT section") + return -1 + + self._log.debug("Total number of pods %d" % self._total_number_of_pods) + + # Parse [PODx] sections + for i in range(1, int(self._total_number_of_pods) + 1): + # Search for POD name + if self._create_config.has_option("POD%d" % i, + "name"): + pod_name = self._create_config.get( + "POD%d" % i, "name") + else: + pod_name = "pod-rapid-%d" % i + + # Search for POD hostname + if self._create_config.has_option("POD%d" % i, + "nodeSelector_hostname"): + pod_nodeselector_hostname = self._create_config.get( + "POD%d" % i, "nodeSelector_hostname") + else: + pod_nodeselector_hostname = None + + # Search for POD dataplane static IP + if self._create_config.has_option("POD%d" % i, + "dp_ip"): + pod_dp_ip = self._create_config.get( + "POD%d" % i, "dp_ip") + else: + pod_dp_ip = None + + pod = Pod(pod_name) + pod.set_nodeselector(pod_nodeselector_hostname) + pod.set_dp_ip(pod_dp_ip) + pod.set_id(i) + + # Add POD to the list of PODs which need to be created + self._pods.append(pod) + + return 0 + + def create_pods(self): + """ Create test PODs and wait for them to start. + Collect information for tests to run. + """ + self._log.info("Creating PODs...") + + # Create PODs using template from yaml file + for pod in self._pods: + self._log.info("Creating POD %s...", pod.get_name()) + pod.create_from_yaml(K8sDeployment.POD_YAML_TEMPLATE_FILE_NAME) + + # Wait for PODs to start + for pod in self._pods: + pod.wait_for_start() + + # Collect information from started PODs for test execution + for pod in self._pods: + pod.set_ssh_credentials(K8sDeployment.SSH_USER, K8sDeployment.SSH_PRIVATE_KEY) + pod.get_sriov_dev_mac() + + def save_runtime_config(self, config_file_name): + self._log.info("Saving config %s for runrapid script...", + config_file_name) + self._runtime_config = ConfigParser.RawConfigParser() + + # Section [DEFAULT] +# self._runtime_config.set("DEFAULT", +# "total_number_of_test_machines", +# self._total_number_of_pods) + + # Section [ssh] + self._runtime_config.add_section("ssh") + self._runtime_config.set("ssh", + "key", + K8sDeployment.SSH_PRIVATE_KEY) + self._runtime_config.set("ssh", + "user", + K8sDeployment.SSH_USER) + + # Section [rapid] + self._runtime_config.add_section("rapid") + self._runtime_config.set("rapid", + "total_number_of_machines", + self._total_number_of_pods) + + # Export information about each pod + # Sections [Mx] + for pod in self._pods: + self._runtime_config.add_section("M%d" % pod.get_id()) + self._runtime_config.set("M%d" % pod.get_id(), + "admin_ip", pod.get_admin_ip()) + self._runtime_config.set("M%d" % pod.get_id(), + "dp_mac", pod.get_dp_mac()) + self._runtime_config.set("M%d" % pod.get_id(), + "dp_pci_dev", pod.get_dp_pci_dev()) + self._runtime_config.set("M%d" % pod.get_id(), + "dp_ip", pod.get_dp_ip()) + + # Section [Varia] + self._runtime_config.add_section("Varia") + self._runtime_config.set("Varia", + "vim", + "kubernetes") + + # Write runtime config file + with open(config_file_name, "w") as file: + self._runtime_config.write(file) + + def delete_pods(self): + for pod in self._pods: + pod.terminate() diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/l2gen.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/l2gen.cfg index 37612c3d..b1f624c1 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/l2gen.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/l2gen.cfg @@ -14,12 +14,13 @@ ;; limitations under the License. ;; +[lua] +dofile("parameters.lua") + [eal options] -n=4 ; force number of memory channels no-output=no ; disable DPDK debug output - -[lua] -dofile("parameters.lua") +eal=--proc-type auto ${eal} [port 0] name=p0 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/l2gen_bare.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/l2gen_bare.cfg index 380b6646..57a7094d 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/l2gen_bare.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/l2gen_bare.cfg @@ -14,12 +14,13 @@ ;; limitations under the License. ;; +[lua] +dofile("parameters.lua") + [eal options] -n=4 ; force number of memory channels no-output=no ; disable DPDK debug output - -[lua] -dofile("parameters.lua") +eal=--proc-type auto ${eal} [port 0] name=p0 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/l2swap.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/l2swap.cfg index 2c8ce091..17396381 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/l2swap.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/l2swap.cfg @@ -14,12 +14,13 @@ ;; limitations under the License. ;; +[lua] +dofile("parameters.lua") + [eal options] -n=4 ; force number of memory channels no-output=no ; disable DPDK debug output - -[lua] -dofile("parameters.lua") +eal=--proc-type auto ${eal} [port 0] name=if0 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/pod-rapid.yaml b/VNFs/DPPD-PROX/helper-scripts/rapid/pod-rapid.yaml new file mode 100644 index 00000000..5ce09071 --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/pod-rapid.yaml @@ -0,0 +1,30 @@ +apiVersion: v1 +kind: Pod +metadata: + name: pod-rapid- + annotations: + k8s.v1.cni.cncf.io/networks: intel-sriov-vfio +spec: + containers: + - name: pod-rapid + image: localhost:5000/prox_slim:latest + imagePullPolicy: Always + securityContext: + capabilities: + add: ["IPC_LOCK"] + volumeMounts: + - mountPath: /dev/hugepages + name: hugepages + resources: + requests: + hugepages-2Mi: 512Mi + memory: 1Gi + intel.com/intel_sriov_vfio: '1' + limits: + hugepages-2Mi: 512Mi + intel.com/intel_sriov_vfio: '1' + volumes: + - name: hugepages + emptyDir: + medium: HugePages + restartPolicy: Never diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/pod.py b/VNFs/DPPD-PROX/helper-scripts/rapid/pod.py new file mode 100644 index 00000000..359523af --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/pod.py @@ -0,0 +1,203 @@ +#!/usr/bin/env python2.7 + +## +## Copyright (c) 2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +from os import path +import time, yaml +import logging +from kubernetes import client, config + +from sshclient import SSHClient + +class Pod: + """Class which represents test pods. + For example with traffic gen, forward/swap applications, etc + """ + k8s_CoreV1Api = None + + _log = None + + _name = "pod" + _namespace = "default" + _nodeSelector_hostname = None + _last_status = None + _id = None + _admin_ip = None + _dp_ip = None + + _ssh_client = None + + _sriov_vf = None + _sriov_vf_mac = None + + def __init__(self, name, namespace = "default", logger_name = "k8srapid"): + self._log = logging.getLogger(logger_name) + + self._name = name + self._namespace = namespace + self._ssh_client = SSHClient(logger_name = logger_name) + + def __del__(self): + """Destroy POD. Do a cleanup. + """ + if self._ssh_client is not None: + self._ssh_client.disconnect() + + def create_from_yaml(self, file_name): + """Load POD description from yaml file. + """ + with open(path.join(path.dirname(__file__), file_name)) as yaml_file: + self.body = yaml.safe_load(yaml_file) + + self.body["metadata"]["name"] = self._name + + if (self._nodeSelector_hostname is not None): + if ("nodeSelector" not in self.body["spec"]): + self.body["spec"]["nodeSelector"] = {} + self.body["spec"]["nodeSelector"]["kubernetes.io/hostname"] = self._nodeSelector_hostname + self._log.debug("Creating POD, body:\n%s" % self.body) + + try: + self.k8s_CoreV1Api.create_namespaced_pod(body = self.body, + namespace = self._namespace) + except client.rest.ApiException as e: + self._log.error("Couldn't create POD %s!\n%s\n" % (self._name, e)) + + def terminate(self): + """Terminate POD. Close SSH connection. + """ + if self._ssh_client is not None: + self._ssh_client.disconnect() + self.k8s_CoreV1Api.delete_namespaced_pod(name = self._name, + namespace = self._namespace) + + def update_admin_ip(self): + """Check for admin IP address assigned by k8s. + """ + try: + pod = self.k8s_CoreV1Api.read_namespaced_pod_status(name = self._name, namespace = self._namespace) + self._admin_ip = pod.status.pod_ip + except client.rest.ApiException as e: + self._log.error("Couldn't update POD %s admin IP!\n%s\n" % (self._name, e)) + + def wait_for_start(self): + """Wait for POD to start. + """ + self._log.info("Waiting for POD %s to start..." % self._name) + while True: + self.get_status() + if (self._last_status == "Running" or self._last_status == "Failed" + or self._last_status == "Unknown"): + break + else: + time.sleep(3) + + self.update_admin_ip() + + return self._last_status + + def ssh_run_cmd(self, cmd): + """Execute command for POD via SSH connection. + SSH credentials should be configured before use of this function. + """ + self._ssh_client.run_cmd(cmd) + + def get_name(self): + return self._name + + def get_admin_ip(self): + return self._admin_ip + + def get_dp_ip(self): + return self._dp_ip + + def get_dp_mac(self): + return self._sriov_vf_mac + + def get_dp_pci_dev(self): + return self._sriov_vf + + def get_id(self): + return self._id + + def get_status(self): + """Get current status fro the pod. + """ + try: + pod = self.k8s_CoreV1Api.read_namespaced_pod_status(name = self._name, + namespace = self._namespace) + except client.rest.ApiException as e: + self._log.error("Couldn't read POD %s status!\n%s\n" % (self._name, e)) + + self._last_status = pod.status.phase + return self._last_status + + def get_sriov_dev_mac(self): + """Get assigned by k8s SRIOV network device plugin SRIOV VF devices. + Return 0 in case of sucessfull configuration. + Otherwise return -1. + """ + self._log.info("Checking assigned SRIOV VF for POD %s" % self._name) + ret = self._ssh_client.run_cmd("cat /opt/k8s_sriov_device_plugin_envs") + if ret != 0: + self._log.error("Failed to check assigned SRIOV VF!" + "Error %s" % self._ssh_client.get_error()) + return -1 + + cmd_output = self._ssh_client.get_output().decode("utf-8").rstrip() + self._log.debug("Environment variable %s" % cmd_output) + + # Parse environment variable + cmd_output = cmd_output.split("=")[1] + self._sriov_vf = cmd_output.split(",")[0] + self._log.debug("Using first SRIOV VF %s" % self._sriov_vf) + + self._log.info("Getting MAC address for assigned SRIOV VF %s" % self._sriov_vf) + self._ssh_client.run_cmd("sudo /home/centos/port_info -n 4 -w %s" % self._sriov_vf) + if ret != 0: + self._log.error("Failed to get MAC address!" + "Error %s" % self._ssh_client.get_error()) + return -1 + + # Parse MAC address + cmd_output = self._ssh_client.get_output().decode("utf-8").rstrip() + self._log.debug(cmd_output) + cmd_output = cmd_output.splitlines() + for line in cmd_output: + if line.startswith("Port 0 MAC: "): + self._sriov_vf_mac = line[12:] + + self._log.debug("MAC %s" % self._sriov_vf_mac) + + def set_dp_ip(self, dp_ip): + self._dp_ip = dp_ip + + def set_id(self, pod_id): + self._id = pod_id + + def set_nodeselector(self, hostname): + """Set hostname on which POD will be executed. + """ + self._nodeSelector_hostname = hostname + + def set_ssh_credentials(self, user, rsa_private_key): + """Set SSH credentials for the SSH connection to the POD. + """ + self.update_admin_ip() + self._ssh_client.set_credentials(ip = self._admin_ip, + user = user, + rsa_private_key = rsa_private_key) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/port_info/Makefile b/VNFs/DPPD-PROX/helper-scripts/rapid/port_info/Makefile new file mode 100644 index 00000000..39ebd354 --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/port_info/Makefile @@ -0,0 +1,42 @@ +## +## Copyright (c) 2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +ifeq ($(RTE_SDK),) +$(error "Please define RTE_SDK environment variable") +endif + +# Default target, can be overridden by command line or environment +RTE_TARGET ?= x86_64-native-linuxapp-gcc + +include $(RTE_SDK)/mk/rte.vars.mk + +# binary name +APP = port_info + +# all source are stored in SRCS-y +SRCS-y := port_info.c + +CFLAGS += $(WERROR_FLAGS) + +# workaround for a gcc bug with noreturn attribute +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603 +ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y) +CFLAGS_main.o += -Wno-return-type +endif + +EXTRA_CFLAGS += -O3 -g -Wfatal-errors + +include $(RTE_SDK)/mk/rte.extapp.mk diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/port_info/port_info.c b/VNFs/DPPD-PROX/helper-scripts/rapid/port_info/port_info.c new file mode 100644 index 00000000..6f270136 --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/port_info/port_info.c @@ -0,0 +1,61 @@ +/* +// Copyright (c) 2019 Intel Corporation +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. +*/ + +#include <stdint.h> +#include <inttypes.h> +#include <rte_eal.h> +#include <rte_ethdev.h> + +static const uint16_t rx_rings = 1, tx_rings = 1; +static const struct rte_eth_conf port_conf = { .link_speeds = ETH_LINK_SPEED_AUTONEG }; + +static inline int +port_info(void) +{ + uint8_t port_id; + int ret_val; + + RTE_ETH_FOREACH_DEV(port_id) { + ret_val = rte_eth_dev_configure(port_id, rx_rings, tx_rings, &port_conf); + if (ret_val != 0) + return ret_val; + + struct ether_addr addr; + rte_eth_macaddr_get(port_id, &addr); + printf("Port %u MAC: %02" PRIx8 ":%02" PRIx8 ":%02" PRIx8 + ":%02" PRIx8 ":%02" PRIx8 ":%02" PRIx8 "\n", + (unsigned) port_id, + addr.addr_bytes[0], addr.addr_bytes[1], + addr.addr_bytes[2], addr.addr_bytes[3], + addr.addr_bytes[4], addr.addr_bytes[5]); + } + + return 0; +} + +int +main(int argc, char *argv[]) +{ + /* Initialize the Environment Abstraction Layer (EAL). */ + int ret = rte_eal_init(argc, argv); + if (ret < 0) + rte_exit(EXIT_FAILURE, "Error with EAL initialization\n"); + + argc -= ret; + argv += ret; + + return port_info(); +} diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/rapid.pods b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid.pods new file mode 100644 index 00000000..918125ae --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/rapid.pods @@ -0,0 +1,30 @@ +## +## Copyright (c) 2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +[DEFAULT] +total_number_of_pods=3 + +[POD1] +nodeSelector_hostname=k8s-node1 +dp_ip=192.168.30.11 + +[POD2] +nodeSelector_hostname=k8s-node2 +dp_ip=192.168.30.12 + +[POD3] +nodeSelector_hostname=k8s-node2 +dp_ip=192.168.30.13 diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py b/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py index 124a2342..62164c4b 100755 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/runrapid.py @@ -978,6 +978,7 @@ vmDPIP =[] vmAdminIP =[] vmDPmac =[] hexDPIP =[] +vmDPPCIDEV =[] config_file =[] prox_socket =[] prox_launch_exit =[] @@ -1011,6 +1012,7 @@ config = ConfigParser.RawConfigParser() config.read(env) machine_map = ConfigParser.RawConfigParser() machine_map.read(machine_map_file) +vim_type = config.get('Varia', 'vim') key = config.get('ssh', 'key') user = config.get('ssh', 'user') total_number_of_machines = config.get('rapid', 'total_number_of_machines') @@ -1023,6 +1025,8 @@ for vm in range(1, int(total_number_of_machines)+1): vmDPIP.append(config.get('M%d'%vm, 'dp_ip')) ip = vmDPIP[-1].split('.') hexDPIP.append(hex(int(ip[0]))[2:].zfill(2) + ' ' + hex(int(ip[1]))[2:].zfill(2) + ' ' + hex(int(ip[2]))[2:].zfill(2) + ' ' + hex(int(ip[3]))[2:].zfill(2)) + if (vim_type == "kubernetes"): + vmDPPCIDEV.append(config.get('M%d'%vm, 'dp_pci_dev')) machine_index = [] for vm in range(1, int(required_number_of_test_machines)+1): machine_index.append(int(machine_map.get('TestM%d'%vm, 'machine_index'))-1) @@ -1040,6 +1044,10 @@ for vm in range(1, int(required_number_of_test_machines)+1): f.write('name="%s"\n'% testconfig.get('TestM%d'%vm, 'name')) f.write('local_ip="%s"\n'% vmDPIP[machine_index[vm-1]]) f.write('local_hex_ip="%s"\n'% hexDPIP[machine_index[vm-1]]) + if (vim_type == "kubernetes"): + f.write("eal=\"--socket-mem=512,0 --file-prefix %s-%s-%s --pci-whitelist %s\"\n" % (env, test_file, vm, vmDPPCIDEV[machine_index[vm-1]])) + else: + f.write("eal=\"\"\n") if testconfig.has_option('TestM%d'%vm, 'cores'): cores.append(ast.literal_eval(testconfig.get('TestM%d'%vm, 'cores'))) f.write('cores="%s"\n'% ','.join(map(str, cores[-1]))) @@ -1133,42 +1141,44 @@ for vm in range(0, int(required_number_of_test_machines)): if prox_socket[vm]: clients.append(prox_ctrl(vmAdminIP[machine_index[vm]], key,user)) connect_client(clients[-1]) + if (vim_type == "OpenStack"): # Creating script to bind the right network interface to the poll mode driver - devbindfile = '{}_{}_devbindvm{}.sh'.format(env,test_file, vm+1) - with open(devbindfile, "w") as f: - newText= 'link="$(ip -o link | grep '+vmDPmac[machine_index[vm]]+' |cut -d":" -f 2)"\n' - f.write(newText) - newText= 'if [ -n "$link" ];\n' - f.write(newText) - newText= 'then\n' - f.write(newText) - newText= ' echo Need to bind\n' - f.write(newText) - newText= ' sudo ' + rundir + '/dpdk/usertools/dpdk-devbind.py --force --bind igb_uio $('+rundir+'/dpdk/usertools/dpdk-devbind.py --status |grep $link | cut -d" " -f 1)\n' - f.write(newText) - newText= 'else\n' - f.write(newText) - newText= ' echo Assuming port is already bound to DPDK\n' - f.write(newText) - newText= 'fi\n' - f.write(newText) - newText= 'exit 0\n' - f.write(newText) - st = os.stat(devbindfile) - os.chmod(devbindfile, st.st_mode | stat.S_IEXEC) - clients[-1].scp_put('./%s'%devbindfile, rundir+'/devbind.sh') - cmd = 'sudo ' + rundir+ '/devbind.sh' - clients[-1].run_cmd(cmd) - log.debug("devbind.sh running on VM%d"%(vm+1)) + devbindfile = '{}_{}_devbindvm{}.sh'.format(env,test_file, vm+1) + with open(devbindfile, "w") as f: + newText= 'link="$(ip -o link | grep '+vmDPmac[machine_index[vm]]+' |cut -d":" -f 2)"\n' + f.write(newText) + newText= 'if [ -n "$link" ];\n' + f.write(newText) + newText= 'then\n' + f.write(newText) + newText= ' echo Need to bind\n' + f.write(newText) + newText= ' sudo ' + rundir + '/dpdk/usertools/dpdk-devbind.py --force --bind igb_uio $('+rundir+'/dpdk/usertools/dpdk-devbind.py --status |grep $link | cut -d" " -f 1)\n' + f.write(newText) + newText= 'else\n' + f.write(newText) + newText= ' echo Assuming port is already bound to DPDK\n' + f.write(newText) + newText= 'fi\n' + f.write(newText) + newText= 'exit 0\n' + f.write(newText) + st = os.stat(devbindfile) + os.chmod(devbindfile, st.st_mode | stat.S_IEXEC) + clients[-1].scp_put('./%s'%devbindfile, rundir+'/devbind.sh') + cmd = 'sudo ' + rundir+ '/devbind.sh' + clients[-1].run_cmd(cmd) + log.debug("devbind.sh running on VM%d"%(vm+1)) + clients[-1].scp_put('./%s'%config_file[vm], rundir+'/%s'%config_file[vm]) clients[-1].scp_put('./{}_{}_parameters{}.lua'.format(env,test_file, vm+1), rundir + '/parameters.lua') if not configonly: if prox_launch_exit[vm]: log.debug("Starting PROX on VM%d"%(vm+1)) if auto_start[vm]: - cmd = 'sudo ' +rundir + '/prox/build/prox -t -o cli -f ' + rundir + '/%s'%config_file[vm] + cmd = 'sudo ' + rundir + '/prox -t -o cli -f ' + rundir + '/%s'%config_file[vm] else: - cmd = 'sudo ' +rundir + '/prox/build/prox -e -t -o cli -f ' + rundir + '/%s'%config_file[vm] + cmd = 'sudo ' + rundir + '/prox -e -t -o cli -f ' + rundir + '/%s'%config_file[vm] clients[-1].fork_cmd(cmd, 'PROX Testing on TestM%d'%(vm+1)) socks_control.append(prox_launch_exit[vm]) socks.append(connect_socket(clients[-1])) diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/secgw1.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/secgw1.cfg index 0ffafb1b..38f36a59 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/secgw1.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/secgw1.cfg @@ -18,12 +18,13 @@ ; This is sample ESP config. ;; +[lua] +dofile("parameters.lua") + [eal options] -n=4 ; force number of memory channels no-output=no ; disable DPDK debug output - -[lua] -dofile("parameters.lua") +eal=--proc-type auto ${eal} [port 0] name=if diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/secgw2.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/secgw2.cfg index dacbf08b..daeb18a8 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/secgw2.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/secgw2.cfg @@ -17,13 +17,15 @@ ;; ; This is sample ESP config. ;; -[eal options] --n=4 ; force number of memory channels -no-output=no ; disable DPDK debug output [lua] dofile("parameters.lua") +[eal options] +-n=4 ; force number of memory channels +no-output=no ; disable DPDK debug output +eal=--proc-type auto ${eal} + [port 0] name=if mac=hardware diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/sshclient.py b/VNFs/DPPD-PROX/helper-scripts/rapid/sshclient.py new file mode 100644 index 00000000..c781271e --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/sshclient.py @@ -0,0 +1,113 @@ +#!/usr/bin/env python2.7 + +## +## Copyright (c) 2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +import paramiko +import logging + +class SSHClient: + """Wrapper class for paramiko module to connect via SSH + """ + _log = None + + _ip = None + _user = None + _rsa_private_key = None + _timeout = None + _ssh = None + _connected = False + + _output = None + _error = None + + def __init__(self, ip=None, user=None, rsa_private_key=None, timeout=15, logger_name=None): + self._ip = ip + self._user = user + self._rsa_private_key = rsa_private_key + self._timeout = timeout + + if (logger_name is not None): + self._log = logging.getLogger(logger_name) + + self._connected = False + + def set_credentials(self, ip, user, rsa_private_key): + self._ip = ip + self._user = user + self._rsa_private_key = rsa_private_key + + def connect(self): + if self._connected: + if (self._log is not None): + self._log.debug("Already connected!") + return + + if ((self._ip is None) or (self._user is None) or + (self._rsa_private_key is None)): + if (self._log is not None): + self._log.error("Wrong parameter! IP %s, user %s, RSA private key %s" + % (self._ip, self._user, self._rsa_private_key)) + self._connected = False + return + + self._ssh = paramiko.SSHClient() + self._ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy()) + private_key = paramiko.RSAKey.from_private_key_file(self._rsa_private_key) + + try: + self._ssh.connect(hostname = self._ip, username = self._user, pkey = private_key) + except Exception as e: + if (self._log is not None): + self._log.error("Failed to connect to the host! IP %s, user %s, RSA private key %s\n%s" + % (self._ip, self._user, self._rsa_private_key, e)) + self._connected = False + self._ssh.close() + return + + self._connected = True + + def disconnect(self): + if self._connected: + self._connected = False + self._ssh.close() + + def run_cmd(self, cmd): + self.connect() + + if self._connected is not True: + return -1 + + try: + ret = 0 + _stdin, stdout, stderr = self._ssh.exec_command(cmd, timeout = self._timeout) + self._output = stdout.read() + self._error = stderr.read() + except Exception as e: + if (self._log is not None): + self._log.error("Failed to execute command! IP %s, cmd %s\n%s" + % (self._ip, cmd, e)) + ret = -1 + + self.disconnect() + + return ret + + def get_output(self): + return self._output + + def get_error(self): + return self._error diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/start.sh b/VNFs/DPPD-PROX/helper-scripts/rapid/start.sh new file mode 100755 index 00000000..742983ec --- /dev/null +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/start.sh @@ -0,0 +1,28 @@ +#!/usr/bin/env bash +## +## Copyright (c) 2010-2019 Intel Corporation +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## + +function save_k8s_envs() +{ + printenv | grep "PCIDEVICE_INTEL_COM" > /opt/k8s_sriov_device_plugin_envs +} + +save_k8s_envs + +# Start SSH server in background +/usr/sbin/sshd + +exec sleep infinity diff --git a/VNFs/DPPD-PROX/helper-scripts/rapid/swap.cfg b/VNFs/DPPD-PROX/helper-scripts/rapid/swap.cfg index 284294e0..b72fc001 100644 --- a/VNFs/DPPD-PROX/helper-scripts/rapid/swap.cfg +++ b/VNFs/DPPD-PROX/helper-scripts/rapid/swap.cfg @@ -14,12 +14,13 @@ ;; limitations under the License. ;; +[lua] +dofile("parameters.lua") + [eal options] -n=4 ; force number of memory channels no-output=no ; disable DPDK debug output - -[lua] -dofile("parameters.lua") +eal=--proc-type auto ${eal} [port 0] name=if0 |