diff options
Diffstat (limited to 'VNFs/DPPD-PROX/config/bng-qos-4ports.cfg')
-rw-r--r-- | VNFs/DPPD-PROX/config/bng-qos-4ports.cfg | 209 |
1 files changed, 209 insertions, 0 deletions
diff --git a/VNFs/DPPD-PROX/config/bng-qos-4ports.cfg b/VNFs/DPPD-PROX/config/bng-qos-4ports.cfg new file mode 100644 index 00000000..cd26fd5b --- /dev/null +++ b/VNFs/DPPD-PROX/config/bng-qos-4ports.cfg @@ -0,0 +1,209 @@ +;; +;; Copyright (c) 2010-2017 Intel Corporation +;; +;; Licensed under the Apache License, Version 2.0 (the "License"); +;; you may not use this file except in compliance with the License. +;; You may obtain a copy of the License at +;; +;; http://www.apache.org/licenses/LICENSE-2.0 +;; +;; Unless required by applicable law or agreed to in writing, software +;; distributed under the License is distributed on an "AS IS" BASIS, +;; WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +;; See the License for the specific language governing permissions and +;; limitations under the License. +;; + +;; +; Compared to config/bng-4ports.cfg, this configuration sets up a BNG with QoS +; functionality. In total, an extra eight cores (four physical cores) are needed +; to run this configuration. Four cores are used for QoS, two cores are assigned +; with the task of classifying upstream packets and two cores are assigned with +; transmitting downstream packets. +;; + +[eal options] +-n=4 ; force number of memory channels +no-output=no ; disable DPDK debug output + +[port 0] +name=cpe0 +mac=hardware +[port 1] +name=inet0 +mac=hardware +[port 2] +name=cpe1 +mac=hardware +[port 3] +name=inet1 +mac=hardware +[variables] +;uncomment one of the following to change the number of workers +;$wk=7s0,7s0h; 2 workers +;$wk=7s0-8s0,7s0h-8s0h; 4 workers +$wk=7s0-9s0,7s0h-9s0h; 6 workers +;$wk=7s0-10s0,7s0h-10s0h; 8 workers + +[defaults] +mempool size=128K +qinq tag=0xa888;0x0081 +[lua] +lpm4 = dofile("ipv4.lua") +dscp_table = dofile("dscp.lua") +user_table = dofile("user_table-65K-bng.lua") +[global] +start time=20 +name=BNG + QoS + +[core 0s0] +mode=master +; IPv4 +;***************************************************************************************** +;##### Load Balancing receiving from CPE and from Internet #### +[core 1s0] +name=LB-cpe +task=0 +mode=lbqinq +rx ring=yes +tx cores=(${wk})t0 proto=ipv4 +tx cores=(${wk})t0p proto=arp +drop=no + +[core 1s0h] +name=LB-inet +task=0 +mode=lbnetwork +rx port=inet0 +untag mpls=yes +tx cores=(${wk})t1 proto=ipv4 + +[core 2s0] +name=LB-cpe +task=0 +mode=lbqinq +rx ring=yes +tx cores=(${wk})t0 proto=ipv4 +tx cores=(${wk})t0p proto=arp +drop=no + +[core 2s0h] +name=LB-inet +task=0 +mode=lbnetwork +untag mpls=yes +rx port=inet1 +tx cores=(${wk})t1 proto=ipv4 + +;***************************************************************************************** +;#### Workers receiving from LB +;#### Task 0: QinQ decapsulation + gre encapsulation + routing +;#### Task 1: ARP +;#### Task 2: GRE depcapsulation + QinQ encapsulation + use learned mac +[core $wk] +name=Worker +task=0 +mode=qinqdecapv4 +rx ring=yes +tx ports from routing table=inet0,inet1 +route table=lpm4 +local ipv4=21.22.23.24 +handle arp=yes +drop=no +user table=user_table + +task=1 +mode=qinqencapv4 +rx ring=yes +tx cores from cpe table=3s0,4s0 remap=cpe0,cpe1 ;map packets going to cpe0 to 3s0 and cpe1 to 4s0 +classify=yes +dscp=dscp_table +user table=user_table + +;***************************************************************************************** +;#### Downstream QoS receiving from workers +;#### classification done by workers +;#### Downstream QoS = QoS core and TX core +[core 3s0] +name=txqos0 +task=0 +mode=qos +rx ring=yes +tx cores=3s0ht0 +drop=no +pipe tc rate=125000 +pipe tb rate=125000 +user table=user_table + +[core 3s0h] +name=txnop0 +task=0 +mode=nop +rx ring=yes +tx port=cpe0 +drop=no + +[core 4s0] +name=txqos1 +task=0 +mode=qos +rx ring=yes +tx cores=4s0ht0 +drop=no +pipe tc rate=125000 +pipe tb rate=125000 +user table=user_table + +[core 4s0h] +name=txnop1 +task=0 +mode=nop +rx ring=yes +tx port=cpe1 +drop=no + +;***************************************************************************************** +;#### upstream QoS receiving from CPE +;#### classification done by RX, QoS core +;#### upstream QoS = RX core (classify) + QoS core +[core 5s0h] +name=rxcl0 +task=0 +mode=classify +rx port=cpe0 +tx cores=5s0t0 +dscp=dscp_table +drop=no +user table=user_table + +[core 5s0] +name=rxqos0 +task=0 +mode=qos +rx ring=yes +tx cores=1s0t0 +pipe tc rate=125000 +pipe tb rate=125000 +drop=no +user table=user_table + +[core 6s0h] +name=rxcl1 +task=0 +mode=classify +rx port=cpe1 +tx cores=6s0t0 +dscp=dscp_table +drop=no +user table=user_table + +[core 6s0] +name=rxqos1 +task=0 +mode=qos +rx ring=yes +tx cores=2s0t0 +pipe tc rate=125000 +pipe tb rate=125000 +drop=no +user table=user_table |